| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 7 Sep 2008 17:58:54 -0700
From: Yinghai Lu <yhlu.kernel@...il.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Yinghai Lu <yhlu.kernel@...il.com>
Subject: [PATCH 5/9] x86: make amd.c have 64bit support code
Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com>
---
arch/x86/kernel/cpu/amd.c | 137 +++++++++++++++++++++++++++++++++++++++++----
1 files changed, 126 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 3c8090d..32e7352 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -16,6 +16,7 @@
#include "cpu.h"
+#ifdef CONFIG_X86_32
/*
* B step AMD K6 before B 9730xxxx have hardware bugs that can cause
* misexecution of code under Linux. Owners of such processors should
@@ -177,6 +178,26 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
set_cpu_cap(c, X86_FEATURE_K7);
}
+#endif
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+static int __cpuinit nearby_node(int apicid)
+{
+ int i, node;
+
+ for (i = apicid - 1; i >= 0; i--) {
+ node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+ node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
@@ -196,6 +217,42 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
#endif
}
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+ int cpu = smp_processor_id();
+ int node;
+ unsigned apicid = hard_smp_processor_id();
+
+ node = c->phys_proc_id;
+ if (apicid_to_node[apicid] != NUMA_NO_NODE)
+ node = apicid_to_node[apicid];
+ if (!node_online(node)) {
+ /* Two possibilities here:
+ - The CPU is missing memory and no node was created.
+ In that case try picking one from a nearby CPU
+ - The APIC IDs differ from the HyperTransport node IDs
+ which the K8 northbridge parsing fills in.
+ Assume they are all increased by a constant offset,
+ but in the same order as the HT nodeids.
+ If that doesn't result in a usable node fall back to the
+ path for the previous case. */
+
+ int ht_nodeid = c->initial_apicid;
+
+ if (ht_nodeid >= 0 &&
+ apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+ node = apicid_to_node[ht_nodeid];
+ /* Pick a nearby node */
+ if (!node_online(node))
+ node = nearby_node(apicid);
+ }
+ numa_set_node(cpu, node);
+
+ printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_X86_HT
@@ -226,13 +283,19 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
{
early_init_amd_mc(c);
+ /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
if (c->x86_power & (1<<8))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+#ifdef CONFIG_X86_64
+ set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+#else
/* Set MTRR capability flag if appropriate */
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+ if (c->x86 == 5)
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+#endif
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -257,17 +320,30 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
early_init_amd(c);
/*
- * FIXME: We should handle the K5 here. Set up the write
- * range and also turn on MSR 83 bits 4 and 31 (write alloc,
- * no bus pipeline)
- */
-
- /*
* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
* 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
*/
clear_cpu_cap(c, 0*32+31);
+#ifdef CONFIG_X86_64
+ /* On C+ stepping K8 rep microcode works well for copy/memset */
+ if (c->x86 == 0xf) {
+ u32 level;
+
+ level = cpuid_eax(1);
+ if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+ }
+ if (c->x86 == 0x10 || c->x86 == 0x11)
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
+
+ /*
+ * FIXME: We should handle the K5 here. Set up the write
+ * range and also turn on MSR 83 bits 4 and 31 (write alloc,
+ * no bus pipeline)
+ */
+
switch (c->x86) {
case 4:
init_amd_k5(c);
@@ -283,7 +359,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
/* K6s reports MCEs but don't actually have all the MSRs */
if (c->x86 < 6)
clear_cpu_cap(c, X86_FEATURE_MCE);
+#endif
+ /* Enable workaround for FXSAVE leak */
if (c->x86 >= 6)
set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
@@ -300,10 +378,14 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
display_cacheinfo(c);
/* Multi core CPU? */
- if (c->extended_cpuid_level >= 0x80000008)
+ if (c->extended_cpuid_level >= 0x80000008) {
amd_detect_cmp(c);
+ srat_detect_node(c);
+ }
+#ifdef CONFIG_X86_32
detect_ht(c);
+#endif
if (c->extended_cpuid_level >= 0x80000006) {
if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
@@ -319,8 +401,38 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
/* MFENCE stops RDTSC speculation */
set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
}
+
+#ifdef CONFIG_X86_64
+ if (c->x86 == 0x10) {
+ /* do this for boot cpu */
+ if (c == &boot_cpu_data)
+ check_enable_amd_mmconf_dmi();
+
+ fam10h_check_enable_mmcfg();
+ }
+
+ if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+ unsigned long long tseg;
+
+ /*
+ * Split up direct mapping around the TSEG SMM area.
+ * Don't do it for gbpages because there seems very little
+ * benefit in doing so.
+ */
+ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+ printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+ if ((tseg>>PMD_SHIFT) <
+ (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+ ((tseg>>PMD_SHIFT) <
+ (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+ (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+ set_memory_4k((unsigned long)__va(tseg), 1);
+ }
+ }
+#endif
}
+#ifdef CONFIG_X86_32
static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* AMD errata T13 (order #21922) */
@@ -333,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int
}
return size;
}
+#endif
static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_vendor = "AMD",
.c_ident = { "AuthenticAMD" },
+#ifdef CONFIG_X86_32
.c_models = {
{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
{
@@ -349,9 +463,10 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = {
}
},
},
+ .c_size_cache = amd_size_cache,
+#endif
.c_early_init = early_init_amd,
.c_init = init_amd,
- .c_size_cache = amd_size_cache,
.c_x86_vendor = X86_VENDOR_AMD,
};
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists