Linux version 2.6.27-rc4-64-dbg-00123-gd3ee1b4-dirty (kronos@dreamland.darkstar.lan) (gcc version 4.3.1 (Debian 4.3.1-8) ) #129 SMP PREEMPT Sat Aug 23 19:35:10 CEST 2008 Command line: BOOT_IMAGE=linux-2.6.27dbg ro video=radeonfb:1024x768-8@60 lapic apic=verbose root=/dev/mapper/mainVol-root debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbf90000 (usable) BIOS-e820: 00000000bbf90000 - 00000000bbf9e000 (ACPI data) BIOS-e820: 00000000bbf9e000 - 00000000bbfe0000 (ACPI NVS) BIOS-e820: 00000000bbfe0000 - 00000000bc000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) last_pfn = 0xbbf90 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 00bbe00000 page 2M 00bbe00000 - 00bbf90000 page 4k kernel direct mapping tables up to bbf90000 @ 8000-d000 last_map_addr: bbf90000 end: bbf90000 RAMDISK: 037dc000 - 040fe2d9 DMI 2.4 present. ACPI: RSDP 000FA980, 0024 (r2 ACPIAM) ACPI: XSDT BBF90100, 0054 (r1 KOZIRO FRONTIER 12000611 MSFT 97) ACPI: FACP BBF90290, 00F4 (r3 MSTEST OEMFACP 12000611 MSFT 97) ACPI: DSDT BBF905C0, 8F8C (r1 A0637 A0637000 0 INTL 20060113) ACPI: FACS BBF9E000, 0040 ACPI: APIC BBF90390, 006C (r1 MSTEST OEMAPIC 12000611 MSFT 97) ACPI: MCFG BBF90400, 003C (r1 MSTEST OEMMCFG 12000611 MSFT 97) ACPI: SLIC BBF90440, 0176 (r1 KOZIRO FRONTIER 12000611 MSFT 97) ACPI: OEMB BBF9E040, 007B (r1 MSTEST AMI_OEM 12000611 MSFT 97) ACPI: HPET BBF99550, 0038 (r1 MSTEST OEMHPET 12000611 MSFT 97) (6 early reservations) ==> bootmem [0000000000 - 00bbf90000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000d012b8] TEXT DATA BSS ==> [0000200000 - 0000d012b8] #3 [00037dc000 - 00040fe2d9] RAMDISK ==> [00037dc000 - 00040fe2d9] #4 [000009c800 - 0000100000] BIOS reserved ==> [000009c800 - 0000100000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009c 0: 0x00000100 -> 0x000bbf90 On node 0 totalpages: 769836 DMA zone: 1018 pages, LIFO batch:0 DMA32 zone: 755369 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fc000 ( fee00000) mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) PM: Registered nosave memory: 000000000009c000 - 000000000009d000 PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: bc000000:42e00000) PERCPU: Allocating 42408 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 756387 Kernel command line: BOOT_IMAGE=linux-2.6.27dbg ro video=radeonfb:1024x768-8@60 lapic apic=verbose root=/dev/mapper/mainVol-root debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 2135.030 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 3839 kB per task-struct memory footprint: 1920 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Memory: 3008320k/3079744k available (2621k kernel code, 70476k reserved, 1524k data, 304k init) CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4270.06 BogoMIPS (lpj=8540120) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080609 Parsing all Control Methods: Table [DSDT](id 0001) - 1008 Objects with 75 Devices 286 Methods 36 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0 not connected. IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Using local APIC timer interrupts. APIC timer calibration result 16679939 Detected 16.679 MHz APIC timer. lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4270.08 BogoMIPS (lpj=8540166) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8540.14 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 khelper used greatest stack depth: 5648 bytes left net_namespace: 1600 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................................................................................ Initialized 30/36 Regions 44/44 Fields 51/51 Buffers 99/100 Packages (1017 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 81 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 2 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:01.0 io port: [7000, 9fff] PCI: bridge 0000:00:01.0 32bit mmio: [ff200000, ff2fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [bfd00000, dfcfffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [dfd00000, dfdfffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.3. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.3 32bit mmio: [ff400000, ff4fffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.4 io port: [a000, afff] PCI: bridge 0000:00:1c.4 32bit mmio: [ff300000, ff3fffff] pci 0000:05:01.0: supports D1 pci 0000:05:01.0: supports D2 pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:01.0: PME# disabled pci 0000:05:03.0: supports D2 pci 0000:05:03.0: PME# supported from D2 D3hot D3cold pci 0000:05:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [b000, cfff] PCI: bridge 0000:00:1e.0 32bit mmio: [ff500000, ff9fffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [dfe00000, dfefffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - A3, should be 96 [20080609] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... register #02: 00170020 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 0 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 0 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 0 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:08: ioport range 0x290-0x297 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x480-0x4bf has been reserved system 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved system 00:09: iomem range 0xfebfe000-0xfebfec00 has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved system 00:10: iomem range 0x0-0x9ffff could not be reserved system 00:10: iomem range 0xc0000-0xcffff has been reserved system 00:10: iomem range 0xe0000-0xfffff could not be reserved system 00:10: iomem range 0x100000-0xbbffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x7000-0x9fff pci 0000:00:01.0: MEM window: 0xff200000-0xff2fffff pci 0000:00:01.0: PREFETCH window: 0x000000bfd00000-0x000000dfcfffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0xff400000-0xff4fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: 0xa000-0xafff pci 0000:00:1c.4: MEM window: 0xff300000-0xff3fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0xb000-0xcfff pci 0000:00:1e.0: MEM window: 0xff500000-0xff9fffff pci 0000:00:1e.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [7000, 9fff] bus: 01 index 1 mmio: [ff200000, ff2fffff] bus: 01 index 2 mmio: [bfd00000, dfcfffff] bus: 01 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [dfd00000, dfdfffff] bus: 04 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [ff400000, ff4fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 02 index 0 io port: [a000, afff] bus: 02 index 1 mmio: [ff300000, ff3fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 05 index 0 io port: [b000, cfff] bus: 05 index 1 mmio: [ff500000, ff9fffff] bus: 05 index 2 mmio: [dfe00000, dfefffff] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 9352k freed HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 5894 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pci 0000:05:01.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Freeing unused kernel memory: 304k freed Write protecting the kernel read-only data: 3888k SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled modprobe used greatest stack depth: 5392 bytes left IOAPIC[0]: Set routing entry (2-17 -> 0x79 -> IRQ 17 Mode:1 Active:1) pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_jmicron 0000:02:00.1: setting latency timer to 64 scsi0 : pata_jmicron scsi1 : pata_jmicron ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17 ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17 ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33 ata1.01: ATAPI: WAITEC ALADAR/1, 0.010000, max UDMA/33 ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 isa bounce pool size: 16 pages scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 scsi 0:0:1:0: CD-ROM WAITEC ALADAR/1 B1.5 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr 0:0:1:0: Attached scsi CD-ROM sr1 sr 0:0:1:0: Attached scsi generic sg1 type 5 modprobe used greatest stack depth: 3480 bytes left sata_uli 0000:05:02.0: version 1.3 IOAPIC[0]: Set routing entry (2-23 -> 0x81 -> IRQ 23 Mode:1 Active:1) sata_uli 0000:05:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 scsi2 : sata_uli scsi3 : sata_uli ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 23 ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 23 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 pata_ali 0000:05:02.1: PCI INT A -> GSI 23 (level, low) -> IRQ 23 scsi4 : pata_ali scsi5 : pata_ali ata5: PATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 23 ata6: PATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 23 ata6.00: ATA-7: Maxtor 6Y120L0, YAR41VW0, max UDMA/133 ata6.00: 240121728 sectors, multi 16: LBA ata6.00: configured for UDMA/133 scsi 5:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 sd 5:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) sd 5:0:0:0: [sda] Write Protect is off sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) sd 5:0:0:0: [sda] Write Protect is off sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 5:0:0:0: [sda] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg2 type 0 modprobe used greatest stack depth: 2480 bytes left ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi6 : ahci scsi7 : ahci scsi8 : ahci scsi9 : ahci scsi10 : ahci scsi11 : ahci ata7: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaff900 irq 315 ata8: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaff980 irq 315 ata9: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaffa00 irq 315 ata10: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaffa80 irq 315 ata11: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaffb00 irq 315 ata12: SATA max UDMA/133 abar m2048@0xffaff800 port 0xffaffb80 irq 315 ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133 ata7.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata7.00: configured for UDMA/133 ata8: SATA link down (SStatus 0 SControl 300) ata9: SATA link down (SStatus 0 SControl 300) ata10: SATA link down (SStatus 0 SControl 300) ata11: SATA link down (SStatus 0 SControl 300) ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata12.00: ATA-8: ST3750330AS, SD15, max UDMA/133 ata12.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata12.00: configured for UDMA/133 scsi 6:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: [LDM] sdb1 sdb2 sd 6:0:0:0: [sdb] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg3 type 0 scsi 11:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5 sd 11:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) sd 11:0:0:0: [sdc] Write Protect is off sd 11:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 11:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) sd 11:0:0:0: [sdc] Write Protect is off sd 11:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sd 11:0:0:0: [sdc] Attached SCSI disk sd 11:0:0:0: Attached scsi generic sg4 type 0 ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:02:00.0: setting latency timer to 64 scsi12 : ahci scsi13 : ahci ata13: SATA max UDMA/133 abar m8192@0xff3fe000 port 0xff3fe100 irq 16 ata14: SATA max UDMA/133 abar m8192@0xff3fe000 port 0xff3fe180 irq 16 ata13: SATA link down (SStatus 0 SControl 300) ata14: SATA link down (SStatus 0 SControl 300) modprobe used greatest stack depth: 2440 bytes left NTFS driver 2.1.29 [Flags: R/O MODULE]. ACPI: SSDT BBF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Parsing all Control Methods: Table [SSDT](id 00CE) - 9 Objects with 0 Devices 3 Methods 0 Regions processor ACPI0007:00: registered as cooling_device0 ACPI: SSDT BBF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Parsing all Control Methods: Table [SSDT](id 00D1) - 7 Objects with 0 Devices 4 Methods 0 Regions processor ACPI0007:01: registered as cooling_device1 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. udevd version 125 started input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] [cut]