| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1221033149-15405-10-git-send-email-giometti@linux.it>
Date: Wed, 10 Sep 2008 09:52:28 +0200
From: Rodolfo Giometti <giometti@...ux.it>
To: linux-kernel@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>,
David Woodhouse <dwmw2@...radead.org>,
Dave Jones <davej@...hat.com>, Sam Ravnborg <sam@...nborg.org>,
Greg KH <greg@...ah.com>,
Randy Dunlap <randy.dunlap@...cle.com>,
Kay Sievers <kay.sievers@...y.org>,
Alan Cox <alan@...rguk.ukuu.org.uk>,
"H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...e.hu>,
Rodolfo Giometti <giometti@...ux.it>
Subject: [PATCH 09/10] PPS: parallel port clients support.
Adds support for the PPS sources connected with the interrupt pin of a
parallel port.
Signed-off-by: Rodolfo Giometti <giometti@...ux.it>
---
drivers/char/lp.c | 61 +++++++++++++++++++++++++++++++++++++++++++
drivers/pps/clients/Kconfig | 10 +++++++
include/linux/parport.h | 22 +++++++++++++++
3 files changed, 93 insertions(+), 0 deletions(-)
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 3f2719b..84e0bb0 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -760,6 +760,27 @@ static struct console lpcons = {
#endif /* console on line printer */
+/* Support for PPS signal on the line printer */
+
+#ifdef CONFIG_PPS_CLIENT_LP
+
+static void lp_pps_echo(int source, int event, void *data)
+{
+ struct parport *port = data;
+ unsigned char status = parport_read_status(port);
+
+ /* echo event via SEL bit */
+ parport_write_control(port,
+ parport_read_control(port) | PARPORT_CONTROL_SELECT);
+
+ /* signal no event */
+ if ((status & PARPORT_STATUS_ACK) != 0)
+ parport_write_control(port,
+ parport_read_control(port) & ~PARPORT_CONTROL_SELECT);
+}
+
+#endif
+
/* --- initialisation code ------------------------------------- */
static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC };
@@ -831,6 +852,38 @@ static int lp_register(int nr, struct parport *port)
}
#endif
+#ifdef CONFIG_PPS_CLIENT_LP
+ port->pps_info.owner = THIS_MODULE;
+ port->pps_info.dev = port->dev;
+ snprintf(port->pps_info.path, PPS_MAX_NAME_LEN, "/dev/lp%d", nr);
+
+ /* No PPS support if lp port has no IRQ line */
+ if (port->irq != PARPORT_IRQ_NONE) {
+ strncpy(port->pps_info.name, port->name, PPS_MAX_NAME_LEN);
+
+ port->pps_info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | \
+ PPS_ECHOASSERT | \
+ PPS_CANWAIT | PPS_TSFMT_TSPEC;
+
+ port->pps_info.echo = lp_pps_echo;
+
+ port->pps_source = pps_register_source(&(port->pps_info),
+ PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
+ if (port->pps_source < 0)
+ dev_err(port->dev,
+ "cannot register PPS source \"%s\"\n",
+ port->pps_info.path);
+ else
+ dev_info(port->dev, "PPS source #%d \"%s\" added\n",
+ port->pps_source, port->pps_info.path);
+ } else {
+ port->pps_source = -1;
+ dev_err(port->dev, "PPS support disabled because port \"%s\" "
+ "is in polling mode\n",
+ port->pps_info.path);
+ }
+#endif
+
return 0;
}
@@ -873,6 +926,14 @@ static void lp_detach (struct parport *port)
console_registered = NULL;
}
#endif /* CONFIG_LP_CONSOLE */
+
+#ifdef CONFIG_PPS_CLIENT_LP
+ if (port->pps_source >= 0) {
+ pps_unregister_source(port->pps_source);
+ dev_dbg(port->dev, "PPS source #%d \"%s\" removed\n",
+ port->pps_source, port->pps_info.path);
+ }
+#endif
}
static struct parport_driver lp_driver = {
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
index 487c1c8..b4054cd 100644
--- a/drivers/pps/clients/Kconfig
+++ b/drivers/pps/clients/Kconfig
@@ -22,4 +22,14 @@ config PPS_CLIENT_LDISC
If you say yes here you get support for a PPS source connected
with the CD (Carrier Detect) pin of your serial port.
+comment "Parallel printer support (forced off)"
+ depends on !( PRINTER != n && !(PPS = m && PRINTER = y))
+
+config PPS_CLIENT_LP
+ bool "Parallel printer support"
+ depends on PRINTER != n && !(PPS = m && PRINTER = y)
+ help
+ If you say yes here you get support for a PPS source connected
+ with the interrupt pin of your parallel port.
+
endif
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 6a0d7cd..f2cfd6e 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -100,6 +100,7 @@ typedef enum {
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
+#include <linux/pps.h>
#include <linux/irqreturn.h>
#include <linux/semaphore.h>
#include <asm/system.h>
@@ -328,6 +329,11 @@ struct parport {
struct list_head full_list;
struct parport *slaves[3];
+
+#ifdef CONFIG_PPS_CLIENT_LP
+ struct pps_source_info pps_info;
+ int pps_source; /* PPS source ID */
+#endif
};
#define DEFAULT_SPIN_TIME 500 /* us */
@@ -516,6 +522,22 @@ extern int parport_daisy_select (struct parport *port, int daisy, int mode);
/* Lowlevel drivers _can_ call this support function to handle irqs. */
static inline void parport_generic_irq(struct parport *port)
{
+#ifdef CONFIG_PPS_CLIENT_LP
+ struct timespec __ts;
+ struct pps_ktime ts;
+
+ /* First of all we get the time stamp... */
+ getnstimeofday(&__ts);
+
+ /* ... and translate it to PPS time data struct */
+ ts.sec = __ts.tv_sec;
+ ts.nsec = __ts.tv_nsec;
+
+ pps_event(port->pps_source, &ts, PPS_CAPTUREASSERT, port);
+ dev_dbg(port->dev, "PPS assert at %lu on source #%d\n",
+ jiffies, port->pps_source);
+#endif
+
parport_ieee1284_interrupt (port);
read_lock(&port->cad_lock);
if (port->cad && port->cad->irq_func)
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists