[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-21704-gd25e26b (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Tue Sep 2 16:05:45 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc nmi_watchdog=1 show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff6a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff6a000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcff60 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff60000 page 4k [ 0.000000] kernel direct mapping tables up to cff60000 @ 8000-e000 [ 0.000000] last_map_addr: cff60000 end: cff60000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000 [ 0.000000] last_map_addr: 230000000 end: 230000000 [ 0.000000] RAMDISK: 37e0f000 - 37fef7dc [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF656FA, 0064 (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF6970E, 00F4 (r3 NVIDIA CK8S 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT CFF6575E, 3F3C (r1 NVIDIA CK8 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF6AFC0, 0040 [ 0.000000] ACPI: SSDT CFF69802, 0574 (r1 AMD POWERNOW 6040000 AMD 1) [ 0.000000] ACPI: SRAT CFF69D76, 0110 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: SPCR CFF69E86, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: MCFG CFF69ED6, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET CFF69F12, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC CFF69F4A, 008E (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF69FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000 [ 0.000000] SRAT: Node 1 PXM 1 130000000-230000000 [ 0.000000] NUMA: Allocated memnodemap from 11000 - 15680 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015680 - 000000000002067f] [ 0.000000] bootmap [0000000000021000 - 0000000000046fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000f96890] TEXT DATA BSS ==> [0000200000 - 0000f96890] [ 0.000000] #3 [0037e0f000 - 0037fef7dc] RAMDISK ==> [0037e0f000 - 0037fef7dc] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] [ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP ==> [0000011000 - 0000015680] [ 0.000000] Bootmem setup node 1 0000000130000000-0000000230000000 [ 0.000000] NODE_DATA [0000000130000000 - 000000013000afff] [ 0.000000] bootmap [000000013000b000 - 000000013002afff] pages 20 [ 0.000000] (8 early reservations) ==> bootmem [0130000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 0000f96890] TEXT DATA BSS [ 0.000000] #3 [0037e0f000 - 0037fef7dc] RAMDISK [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE [ 0.000000] #6 [000000c000 - 0000011000] PGTABLE [ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP [ 0.000000] found SMP MP-table at [ffff8800000f7600] 000f7600 [ 0.000000] [ffffe20000000000-ffffe200071fffff] PMD -> [ffff880028200000-ffff88002e1fffff] on node 0 [ 0.000000] [ffffe20007200000-ffffe2000d1fffff] PMD -> [ffff880130200000-ffff8801361fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000cff60 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] 1: 0x00130000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 1048317 [ 0.000000] DMA zone: 307 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 823232 pages, LIFO batch:31 [ 0.000000] Normal zone: 192000 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 1024000 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff60000 - 00000000cff6a000 [ 0.000000] PM: Registered nosave memory: 00000000cff6a000 - 00000000cff80000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 51872 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 2 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2039539 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc nmi_watchdog=1 show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 2800.009 MHz processor. [ 0.003333] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 3839 kB [ 0.003333] per task-struct memory footprint: 1920 bytes [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Node 0: aperture @ 0 size 32 MB [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.003333] Memory: 8108304k/9175040k available (3896k kernel code, 279268k reserved, 2243k data, 676k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.003333] hpet clockevent registered [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.35 BogoMIPS (lpj=9333363) [ 0.006698] Security Framework initialized [ 0.010737] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.018937] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.025421] Mount-cache hash table entries: 256 [ 0.026974] Initializing cgroup subsys ns [ 0.030010] Initializing cgroup subsys cpuacct [ 0.033335] Initializing cgroup subsys memory [ 0.036674] Initializing cgroup subsys devices [ 0.040006] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.043332] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.046666] CPU 0/0 -> Node 0 [ 0.049999] tseg: 00cff80000 [ 0.050000] CPU: Physical Processor ID: 0 [ 0.053331] CPU: Processor Core ID: 0 [ 0.056670] using C1E aware idle routine [ 0.060018] ACPI: Core revision 20080609 [ 0.070530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.108872] activating NMI Watchdog ... done. [ 0.109994] CPU0: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03 [ 0.116660] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12500076 [ 0.123328] Detected 12.500 MHz APIC timer. [ 0.126660] APIC timer registered as dummy, due to nmi_watchdog=1! [ 0.130154] lockdep: fixing up alternatives. [ 0.133347] Booting processor 1/1 ip 6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 5602.36 BogoMIPS (lpj=9333385) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU 1/1 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.230372] CPU1: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03 [ 0.238145] lockdep: fixing up alternatives. [ 0.239999] Booting processor 2/2 ip 6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 5602.44 BogoMIPS (lpj=9333513) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU 2/2 -> Node 1 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.340530] CPU2: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03 [ 0.348138] lockdep: fixing up alternatives. [ 0.349997] Booting processor 3/3 ip 6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 5602.48 BogoMIPS (lpj=9333575) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU 3/3 -> Node 1 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.447118] CPU3: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03 [ 0.454734] Brought up 4 CPUs [ 0.456640] Total of 4 processors activated (22409.64 BogoMIPS). [ 0.460033] Testing NMI watchdog ... [ 0.532432] WARNING: CPU#0: NMI appears to be stuck (0->0)! [ 0.533301] Please report this to bugzilla.kernel.org, [ 0.536635] and attach the output of the 'dmesg' command. [ 0.539968] [ 0.543302] WARNING: CPU#1: NMI appears to be stuck (0->0)! [ 0.546635] Please report this to bugzilla.kernel.org, [ 0.549968] and attach the output of the 'dmesg' command. [ 0.553301] [ 0.554980] WARNING: CPU#2: NMI appears to be stuck (0->0)! [ 0.556635] Please report this to bugzilla.kernel.org, [ 0.559968] and attach the output of the 'dmesg' command. [ 0.563301] [ 0.566635] WARNING: CPU#3: NMI appears to be stuck (0->0)! [ 0.569968] Please report this to bugzilla.kernel.org, [ 0.573301] and attach the output of the 'dmesg' command. [ 0.577183] net_namespace: 968 bytes [ 0.580160] xor: automatically using best checksumming function: generic_sse [ 0.599969] generic_sse: 8630.400 MB/sec [ 0.603302] xor: using function: generic_sse (8630.400 MB/sec) [ 0.606692] NET: Registered protocol family 16 [ 0.610254] No dock devices found. [ 0.613503] node 0 link 2: io port [1000, 3fff] [ 0.613506] TOM: 00000000d0000000 aka 3328M [ 0.616636] node 0 link 2: mmio [d0000000, dfffffff] [ 0.616638] node 0 link 2: mmio [a0000, bffff] [ 0.616640] node 0 link 2: mmio [e0000000, e7ffffff] [ 0.616643] TOM2: 0000000230000000 aka 8960M [ 0.619969] bus: [00,ff] on node 0 link 2 [ 0.619970] bus: 00 index 0 io port: [0, ffff] [ 0.619972] bus: 00 index 1 mmio: [d0000000, ffffffff] [ 0.619974] bus: 00 index 2 mmio: [a0000, bffff] [ 0.619975] bus: 00 index 3 mmio: [230000000, fcffffffff] [ 0.619989] ACPI: bus type pci registered [ 0.623448] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 [ 0.626636] PCI: MCFG area at e0000000 reserved in E820 [ 0.630065] PCI: Using MMCONFIG at e0000000 - e04fffff [ 0.633302] PCI: Using configuration type 1 for base access [ 0.643980] ACPI: EC: Look up EC in DSDT [ 0.648409] ACPI: Interpreter enabled [ 0.649969] ACPI: (supports S0 S1 S3 S4 S5) [ 0.656635] ACPI: Using IOAPIC for interrupt routing [ 0.670034] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.673616] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.676644] pci 0000:00:01.1: PME# disabled [ 0.680009] pci 0000:00:02.0: supports D1 [ 0.680010] pci 0000:00:02.0: supports D2 [ 0.680012] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.683303] pci 0000:00:02.0: PME# disabled [ 0.686672] pci 0000:00:02.1: supports D1 [ 0.686673] pci 0000:00:02.1: supports D2 [ 0.686675] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.689969] pci 0000:00:02.1: PME# disabled [ 0.693535] pci 0000:00:08.0: supports D1 [ 0.693537] pci 0000:00:08.0: supports D2 [ 0.693538] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.696637] pci 0000:00:08.0: PME# disabled [ 0.700017] pci 0000:00:09.0: supports D1 [ 0.700019] pci 0000:00:09.0: supports D2 [ 0.700020] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.703304] pci 0000:00:09.0: PME# disabled [ 0.706664] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.709969] pci 0000:00:0a.0: PME# disabled [ 0.713331] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.716636] pci 0000:00:0d.0: PME# disabled [ 0.719997] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.723302] pci 0000:00:0f.0: PME# disabled [ 0.726878] pci 0000:01:04.0: supports D1 [ 0.726879] pci 0000:01:04.0: supports D2 [ 0.726904] pci 0000:00:06.0: transparent bridge [ 0.729969] PCI: bridge 0000:00:06.0 io port: [3000, 3fff] [ 0.733303] PCI: bridge 0000:00:06.0 32bit mmio: [d0100000, d01fffff] [ 0.736636] PCI: bridge 0000:00:06.0 32bit mmio pref: [d8000000, dfffffff] [ 0.740034] pci 0000:02:00.0: supports D1 [ 0.740064] PCI: bridge 0000:00:0a.0 32bit mmio: [d0200000, d02fffff] [ 0.743388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.743462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.743486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.743513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.743540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT] [ 0.769795] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.777165] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23) [ 0.786790] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.797164] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.808626] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.816220] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23) [ 0.822660] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.830122] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.840505] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.851950] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23) [ 0.858235] ACPI: PCI Interrupt Link [LMA2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23) [ 0.867922] ACPI: PCI Interrupt Link [LUS2] (IRQs *5 7 10 11 14 15 16 17 18 19 20 21 22 23) [ 0.877614] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23) [ 0.887303] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.898166] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled. [ 0.909241] ACPI: PCI Interrupt Link [LTID] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23) [ 0.915682] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23) [ 0.921892] ACPI: PCI Interrupt Link [LSI2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23) [ 0.928367] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.930030] pnp: PnP ACPI init [ 0.933313] ACPI: bus type pnp registered [ 0.942967] pnp: PnP ACPI: found 15 devices [ 0.943302] ACPI: ACPI bus type pnp unregistered [ 0.946899] SCSI subsystem initialized [ 0.950132] libata version 3.00 loaded. [ 0.953483] usbcore: registered new interface driver usbfs [ 0.956699] usbcore: registered new interface driver hub [ 0.960060] usbcore: registered new device driver usb [ 0.963671] PCI: Using ACPI for IRQ routing [ 0.980227] PCI-DMA: Disabling AGP. [ 0.984431] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.986635] PCI-DMA: using GART IOMMU. [ 0.989971] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.993870] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.000341] hpet0: 3 32-bit timers, 25000000 Hz [ 1.004395] ACPI: RTC can wake from S4 [ 1.006637] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. [ 1.009524] Could not switch to high resolution mode on CPU 3 [ 1.009528] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 1.009531] Could not switch to high resolution mode on CPU 1 [ 1.009534] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 1.009538] Could not switch to high resolution mode on CPU 2 [ 1.009969] lapic is not functional. [ 1.056944] Could not switch to high resolution mode on CPU 0 [ 1.076221] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 1.084054] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.091883] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 1.099719] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved [ 1.107052] system 00:03: iomem range 0xd0000000-0xd0007fff has been reserved [ 1.114383] system 00:04: ioport range 0x1000-0x107f has been reserved [ 1.121101] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 1.127817] system 00:04: ioport range 0x1400-0x147f has been reserved [ 1.134537] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 1.141258] system 00:04: ioport range 0x1800-0x187f has been reserved [ 1.147976] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 1.154698] system 00:04: ioport range 0x2440-0x247f has been reserved [ 1.161420] system 00:04: ioport range 0x2400-0x243f has been reserved [ 1.168151] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 1.174695] system 00:07: ioport range 0xc05-0xc06 has been reserved [ 1.182277] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 1.188388] pci 0000:00:06.0: IO window: 0x3000-0x3fff [ 1.193889] pci 0000:00:06.0: MEM window: 0xd0100000-0xd01fffff [ 1.200176] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 1.208089] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 1.214205] pci 0000:00:0a.0: IO window: disabled [ 1.219275] pci 0000:00:0a.0: MEM window: 0xd0200000-0xd02fffff [ 1.225558] pci 0000:00:0a.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.233474] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 1.239598] pci 0000:00:0d.0: IO window: disabled [ 1.244666] pci 0000:00:0d.0: MEM window: disabled [ 1.249825] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.255416] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04 [ 1.261525] pci 0000:00:0f.0: IO window: disabled [ 1.266594] pci 0000:00:0f.0: MEM window: disabled [ 1.271751] pci 0000:00:0f.0: PREFETCH window: disabled [ 1.277347] pci 0000:00:06.0: setting latency timer to 64 [ 1.277352] pci 0000:00:0a.0: setting latency timer to 64 [ 1.277357] pci 0000:00:0d.0: setting latency timer to 64 [ 1.277363] pci 0000:00:0f.0: setting latency timer to 64 [ 1.277365] bus: 00 index 0 io port: [0, ffff] [ 1.282004] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.292287] bus: 01 index 0 io port: [3000, 3fff] [ 1.297187] bus: 01 index 1 mmio: [d0100000, d01fffff] [ 1.302519] bus: 01 index 2 mmio: [d8000000, dfffffff] [ 1.307849] bus: 01 index 3 io port: [0, ffff] [ 1.312483] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 1.317900] bus: 02 index 0 mmio: [0, 0] [ 1.322017] bus: 02 index 1 mmio: [d0200000, d02fffff] [ 1.327349] bus: 02 index 2 mmio: [d1000000, d10fffff] [ 1.332678] bus: 02 index 3 mmio: [0, 0] [ 1.336793] bus: 03 index 0 mmio: [0, 0] [ 1.340910] bus: 03 index 1 mmio: [0, 0] [ 1.345025] bus: 03 index 2 mmio: [0, 0] [ 1.349142] bus: 03 index 3 mmio: [0, 0] [ 1.353256] bus: 04 index 0 mmio: [0, 0] [ 1.357374] bus: 04 index 1 mmio: [0, 0] [ 1.361490] bus: 04 index 2 mmio: [0, 0] [ 1.365609] bus: 04 index 3 mmio: [0, 0] [ 1.369739] NET: Registered protocol family 2 [ 1.413137] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.423160] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.436206] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 1.445874] TCP: Hash tables configured (established 524288 bind 65536) [ 1.452716] TCP reno registered [ 1.466350] NET: Registered protocol family 1 [ 1.471023] checking if image is initramfs... it is [ 1.572646] Freeing initrd memory: 1921k freed [ 1.578336] Simple Boot Flag at 0x37 set to 0x80 [ 1.585905] audit: initializing netlink socket (disabled) [ 1.591560] type=2000 audit(1221176947.589:1): initialized [ 1.602577] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.613210] VFS: Disk quotas dquot_6.5.1 [ 1.617471] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.625780] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.632809] msgmni has been set to 15840 [ 1.637191] async_tx: api initialized (async) [ 1.641747] io scheduler noop registered [ 1.645871] io scheduler anticipatory registered [ 1.650694] io scheduler deadline registered [ 1.655347] io scheduler cfq registered (default) [ 1.660281] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.879582] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.884851] pci 0000:00:05.1: Enabling HT MSI Mapping [ 1.890123] pci 0000:00:05.2: Enabling HT MSI Mapping [ 1.895393] pci 0000:00:06.0: Enabling HT MSI Mapping [ 1.900669] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.905945] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.911213] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.916486] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 1.921761] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 1.927029] pci 0000:01:04.0: Boot video device [ 1.927212] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 1.927241] pcieport-driver 0000:00:0a.0: found MSI capability [ 1.933324] pci_express 0000:00:0a.0:pcie00: allocate port service [ 1.933414] pci_express 0000:00:0a.0:pcie01: allocate port service [ 1.933475] pci_express 0000:00:0a.0:pcie03: allocate port service [ 1.933576] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.933604] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.939667] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.939741] pci_express 0000:00:0d.0:pcie01: allocate port service [ 1.939801] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.939898] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 1.939925] pcieport-driver 0000:00:0f.0: found MSI capability [ 1.945977] pci_express 0000:00:0f.0:pcie00: allocate port service [ 1.946048] pci_express 0000:00:0f.0:pcie01: allocate port service [ 1.946108] pci_express 0000:00:0f.0:pcie03: allocate port service [ 1.947934] aer 0000:00:0a.0:pcie01: AER service couldn't init device: no _OSC support [ 1.949554] aer 0000:00:0d.0:pcie01: AER service couldn't init device: no _OSC support [ 1.951148] aer 0000:00:0f.0:pcie01: AER service couldn't init device: no _OSC support [ 1.951606] input: Power Button (FF) as /class/input/input0 [ 1.957384] ACPI: Power Button (FF) [PWRF] [ 1.961801] input: Power Button (CM) as /class/input/input1 [ 1.967565] ACPI: Power Button (CM) [PWRB] [ 1.972294] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.978363] processor ACPI0007:00: registered as cooling_device0 [ 1.984576] ACPI: Processor [C000] (supports 2 throttling states) [ 1.991063] processor ACPI0007:01: registered as cooling_device1 [ 1.997366] processor ACPI0007:02: registered as cooling_device2 [ 2.003684] processor ACPI0007:03: registered as cooling_device3 [ 2.079999] hpet_resources: 0xfed00000 is busy [ 2.080193] Non-volatile memory driver v1.2 [ 2.084715] Linux agpgart interface v0.103 [ 2.089107] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 2.095680] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.102659] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.108789] Floppy drive(s): fd0 is 1.44M [ 2.130069] FDC 0 is a post-1991 82077 [ 2.137592] brd: module loaded [ 2.142041] loop: module loaded [ 2.145379] tun: Universal TUN/TAP device driver, 1.6 [ 2.150619] tun: (C) 1999-2004 Max Krasnyansky [ 2.157181] console [netcon0] enabled [ 2.161035] netconsole: network logging started [ 2.165762] Uniform Multi-Platform E-IDE driver [ 2.170615] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.180715] Probing IDE interface ide0... [ 3.149712] hdb: CD-224E-N, ATAPI CD/DVD-ROM drive [ 3.206282] Probing IDE interface ide1... [ 3.739617] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.744443] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.751258] hdb: ATAPI 24X CD-ROM drive, 256kB Cache [ 3.756646] Uniform CD-ROM driver Revision: 3.20 [ 3.771462] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.779263] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.786512] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 3.792690] Driver 'sd' needs updating - please use bus_type methods [ 3.799315] Driver 'sr' needs updating - please use bus_type methods [ 3.806449] sata_nv 0000:00:05.0: version 3.5 [ 3.806741] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 3.812700] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 23 (level, low) -> IRQ 23 [ 3.821311] sata_nv 0000:00:05.0: Using SWNCQ mode [ 3.826430] sata_nv 0000:00:05.0: setting latency timer to 64 [ 3.826613] scsi0 : sata_nv [ 3.829796] scsi1 : sata_nv [ 3.832986] ata1: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 23 [ 3.840314] ata2: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 23 [ 4.179871] ata1: SATA link down (SStatus 0 SControl 300) [ 4.516536] ata2: SATA link down (SStatus 0 SControl 300) [ 4.522429] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22 [ 4.528388] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 22 (level, low) -> IRQ 22 [ 4.536997] sata_nv 0000:00:05.1: Using SWNCQ mode [ 4.542083] sata_nv 0000:00:05.1: setting latency timer to 64 [ 4.542220] scsi2 : sata_nv [ 4.545334] scsi3 : sata_nv [ 4.548512] ata3: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 22 [ 4.555840] ata4: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 22 [ 4.896535] ata3: SATA link down (SStatus 0 SControl 300) [ 5.233200] ata4: SATA link down (SStatus 0 SControl 300) [ 5.239087] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 21 [ 5.245047] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 21 (level, low) -> IRQ 21 [ 5.253654] sata_nv 0000:00:05.2: Using SWNCQ mode [ 5.258744] sata_nv 0000:00:05.2: setting latency timer to 64 [ 5.258881] scsi4 : sata_nv [ 5.261998] scsi5 : sata_nv [ 5.265174] ata5: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 21 [ 5.272504] ata6: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 21 [ 5.613197] ata5: SATA link down (SStatus 0 SControl 300) [ 5.949864] ata6: SATA link down (SStatus 0 SControl 300) [ 5.955612] pata_amd 0000:00:04.0: version 0.3.10 [ 5.955640] pata_amd 0000:00:04.0: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 5.963385] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 0 (errno=-16) [ 5.971653] pata_amd 0000:00:04.0: BAR 2: can't reserve I/O region [0x170-0x177] [ 5.979396] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 1 (errno=-16) [ 5.987656] pata_amd 0000:00:04.0: no available native port [ 5.993731] Fusion MPT base driver 3.04.07 [ 5.998021] Copyright (c) 1999-2008 LSI Corporation [ 6.003109] Fusion MPT SPI Host driver 3.04.07 [ 6.007833] Fusion MPT SAS Host driver 3.04.07 [ 6.013164] ieee1394: raw1394: /dev/raw1394 device initialized [ 6.019695] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 6.025650] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20 [ 6.034353] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 6.034355] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 6.040002] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 6.047776] ehci_hcd 0000:00:02.1: debug port 1 [ 6.052503] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 6.052521] ehci_hcd 0000:00:02.1: irq 20, io mem 0xd0041000 [ 6.066176] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.074154] usb usb1: configuration #1 chosen from 1 choice [ 6.080016] hub 1-0:1.0: USB hub found [ 6.083976] hub 1-0:1.0: 10 ports detected [ 6.189886] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.190142] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19 [ 6.196100] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19 [ 6.204801] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 6.204804] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 6.210376] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 6.218132] ohci_hcd 0000:00:02.0: irq 19, io mem 0xd0040000 [ 6.278315] usb usb2: configuration #1 chosen from 1 choice [ 6.284165] hub 2-0:1.0: USB hub found [ 6.288118] hub 2-0:1.0: 10 ports detected [ 6.393142] USB Universal Host Controller Interface driver v3.0 [ 6.399423] usbcore: registered new interface driver usblp [ 6.405107] Initializing USB Mass Storage driver... [ 6.410243] usbcore: registered new interface driver usb-storage [ 6.416443] USB Mass Storage support registered. [ 6.421406] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 6.679856] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.685238] mice: PS/2 mouse device common for all mice [ 6.877983] md: linear personality registered for level -1 [ 6.883663] md: raid0 personality registered for level 0 [ 6.889166] md: raid1 personality registered for level 1 [ 6.894669] md: raid10 personality registered for level 10 [ 6.956180] raid6: int64x1 2587 MB/s [ 7.016180] raid6: int64x2 3291 MB/s [ 7.076168] raid6: int64x4 3160 MB/s [ 7.136168] raid6: int64x8 2360 MB/s [ 7.196178] raid6: sse2x1 3858 MB/s [ 7.256175] raid6: sse2x2 5139 MB/s [ 7.316176] raid6: sse2x4 5262 MB/s [ 7.320122] raid6: using algorithm sse2x4 (5262 MB/s) [ 7.325365] md: raid6 personality registered for level 6 [ 7.335744] md: raid5 personality registered for level 5 [ 7.341252] md: raid4 personality registered for level 4 [ 7.346753] md: multipath personality registered for level -4 [ 7.352960] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 7.361877] cpuidle: using governor ladder [ 7.366402] cpuidle: using governor menu [ 7.370591] usbcore: registered new interface driver usbhid [ 7.376362] usbhid: v2.6:USB HID core driver [ 7.380936] oprofile: using NMI interrupt. [ 7.385695] TCP cubic registered [ 7.389332] NET: Registered protocol family 10 [ 7.394985] IPv6 over IPv4 tunneling driver [ 7.400135] NET: Registered protocol family 17 [ 7.405122] RPC: Registered udp transport module. [ 7.410021] RPC: Registered tcp transport module. [ 7.415002] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2220 processors (4 cpu cores) (version 2.20.00) [ 7.425975] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 [ 7.431831] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 7.437687] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 7.443537] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 7.449301] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 7.455149] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 7.460999] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 7.467050] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 [ 7.472929] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 7.478785] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 7.484637] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 7.490411] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 7.496279] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 7.502134] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 7.508739] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 7.515289] Freeing unused kernel memory: 676k freed [ 7.520818] Write protecting the kernel read-only data: 5672k [ 7.742843] Clocksource tsc unstable (delta = -111149082 ns) [ 8.177545] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 8.177654] arcmsr 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, low) -> IRQ 18 [ 8.177666] arcmsr 0000:02:00.0: setting latency timer to 64 [ 8.189529] ARECA RAID ADAPTER6: FIRMWARE VERSION V1.44 2008-1-31 [ 8.202850] scsi6 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 8.202853] Driver Version 1.20.00.15 2008/02/27 [ 8.205018] scsi 6:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 8.207052] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 8.207117] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB) [ 8.207182] sd 6:0:0:0: [sda] Write Protect is off [ 8.207188] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 8.207298] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.207560] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 8.207621] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB) [ 8.207685] sd 6:0:0:0: [sda] Write Protect is off [ 8.207692] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 8.207802] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.207811] sda: sda1 sda2 sda3 sda4 [ 8.245400] sd 6:0:0:0: [sda] Attached SCSI disk [ 8.247390] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 8.249720] scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 8.252259] scsi 6:0:16:0: Attached scsi generic sg1 type 3 [ 8.504889] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 8.542592] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 8.601009] Adaptec aacraid driver 1.1-5[2456]-ms [ 8.993029] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.998828] SGI XFS Quota Management subsystem [ 9.048982] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 9.048990] Copyright (c) 1999-2006 Intel Corporation. [ 12.346739] EXT3-fs: INFO: recovery required on readonly filesystem. [ 12.346748] EXT3-fs: write access will be enabled during recovery. [ 13.161202] kjournald starting. Commit interval 5 seconds [ 13.161240] EXT3-fs: sda3: orphan cleanup on readonly fs [ 13.161256] ext3_orphan_cleanup: deleting unreferenced inode 2501876 [ 13.161508] ext3_orphan_cleanup: deleting unreferenced inode 2501875 [ 13.161529] ext3_orphan_cleanup: deleting unreferenced inode 2501874 [ 13.161549] ext3_orphan_cleanup: deleting unreferenced inode 2501873 [ 13.161565] EXT3-fs: sda3: 4 orphan inodes deleted [ 13.161570] EXT3-fs: recovery complete. [ 13.162085] EXT3-fs: mounted filesystem with ordered data mode. [ 15.634222] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2440 [ 15.634257] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2400 [ 15.660203] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 15.660582] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17 [ 15.660659] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, low) -> IRQ 17 [ 15.660663] forcedeth 0000:00:08.0: setting latency timer to 64 [ 15.663568] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:76:8b:be [ 15.663571] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 15.663876] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 16 [ 15.663898] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 16 (level, low) -> IRQ 16 [ 15.663923] forcedeth 0000:00:09.0: setting latency timer to 64 [ 15.665255] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:76:8b:bf [ 15.665257] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 18.107517] EXT3 FS on sda3, internal journal [ 18.380032] SMsC 37B787 watchdog component driver 1.1 initialising... [ 18.381424] smsc37b787_wdt: Timeout set to 60 second(s). [ 18.381429] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)... [ 21.417259] kjournald starting. Commit interval 5 seconds [ 21.417297] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 21.422349] EXT3 FS on sda4, internal journal [ 21.422359] EXT3-fs: recovery complete. [ 21.422430] EXT3-fs: mounted filesystem with ordered data mode. [ 21.501039] Adding 15999992k swap on /dev/sda2. Priority:-1 extents:1 across:15999992k [ 42.038582] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 42.045903] NFSD: starting 90-second grace period [ 45.396027] eth0: no IPv6 routers present [ 49.761642] w83627hf: Found W83627HF chip at 0xc00