Message-ID: <f488382f0809190122h1de69a39h7ae5f609e626a9dc@mail.gmail.com>
Date:	Fri, 19 Sep 2008 01:22:04 -0700
From:	"Steven Noonan" <steven@...inklabs.net>
To:	"Luis R. Rodriguez" <lrodriguez@...eros.com>
Cc:	"Luis Rodriguez" <Luis.Rodriguez@...eros.com>,
	"Ingo Molnar" <mingo@...e.hu>,
	"ath9k-devel@...ts.ath9k.org" <ath9k-devel@...ts.ath9k.org>,
	linux-wireless <linux-wireless@...r.kernel.org>,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: [ath9k-devel] ath9k: massive unexplained latency in 2.6.27 (rc5, rc6, probably others)

On Fri, Sep 19, 2008 at 12:29 AM, Steven Noonan <steven@...inklabs.net> wrote:
> On Thu, Sep 18, 2008 at 8:01 PM, Luis R. Rodriguez
> <lrodriguez@...eros.com> wrote:
>> Thanks for testing, and glad to see this is resolved.
>>
>
> Damn. It's back. I was using wireless normally this evening. Browsing
> the web, that kind of thing, and then the wireless inexplicably
> dropped (even with the group rekeying patch), so I unloaded/reloaded
> the module. This popped up in dmesg:
>
> [ 3834.375658] vendor=8086 device=27d2
> [ 3834.375666] ath9k 0000:03:00.0: PCI INT A disabled
> [ 3834.375716] ath9k: driver unloaded
> [ 3838.552419] ath9k: 0.1
> [ 3838.552502] vendor=8086 device=27d2
> [ 3838.552511] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 3838.552532] ath9k 0000:03:00.0: setting latency timer to 64
> [ 3838.688924] phy1: Selected rate control algorithm 'ath9k_rate_control'
> [ 3838.693652] phy1: Atheros 5416: mem=0xffffc20000060000, irq=17
> [ 3839.427125] irq 17: nobody cared (try booting with the "irqpoll" option)
> [ 3839.427136] Pid: 0, comm: swapper Tainted: P
> 2.6.27-rc6-tip-00478-g74f1a36 #1
> [ 3839.427141] Call Trace:
> [ 3839.427145]  <IRQ>  [<ffffffff802219c5>] ? read_hpet+0x9/0x1c
> [ 3839.427165]  [<ffffffff8026af71>] __report_bad_irq+0x3d/0x8c
> [ 3839.427172]  [<ffffffff8026b0c6>] note_interrupt+0x106/0x160
> [ 3839.427180]  [<ffffffff8026b801>] handle_fasteoi_irq+0xad/0xda
> [ 3839.427188]  [<ffffffff8020f7b0>] do_IRQ+0x10c/0x190
> [ 3839.427194]  [<ffffffff8020c551>] ret_from_intr+0x0/0xa
> [ 3839.427198]  <EOI>  [<ffffffff8026c6f0>] rcu_pending+0x62/0x6e
> [ 3839.427211]  [<ffffffff8025bc11>] ? tick_nohz_stop_sched_tick+0x2e4/0x2f3
> [ 3839.427218]  [<ffffffff8020ad94>] cpu_idle+0x7b/0xdb
> [ 3839.427226]  [<ffffffff8060c921>] rest_init+0x75/0x77
> [ 3839.427231] handlers:
> [ 3839.427234] [<ffffffffa0240238>] (ath_isr+0x0/0x170 [ath9k])
> [ 3839.427263] Disabling IRQ #17
> [ 3842.263699] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 3848.035003] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 3848.432701] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 3850.216947] wlan0: authenticate with AP 00:1e:52:79:4d:01
> [ 3850.217027] wlan0: authenticate with AP 00:1e:52:79:4d:01
> [ 3850.228326] wlan0: authenticated
> [ 3850.228336] wlan0: associate with AP 00:1e:52:79:4d:01
> [ 3850.428140] wlan0: associate with AP 00:1e:52:79:4d:01
> [ 3850.628151] wlan0: associate with AP 00:1e:52:79:4d:01
> [ 3850.728305] wlan0: RX AssocResp from 00:1e:52:79:4d:01 (capab=0x431
> status=0 aid=1)
> [ 3850.728314] wlan0: associated
> [ 3850.728655] wlan0 (WE) : Wireless Event too big (320)
> [ 3850.743377] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 3860.855104] wlan0: no IPv6 routers present
>
> I rebuilt the module with DBG_ATH_INTERRUPT, but it somehow stumbled
> itself back into working order while I was compiling. I can't keep the
> interrupt debugging on all the time because it's just -too verbose-,
> and when I pop a debug version of the module in, then it's too late to
> track the issue....
>

Do pardon me if this is incredibly stupid, but I have some thoughts
about ath9k interrupt handling. Let me know if there's any validity
here. And if there's any invalid points, please help me understand
what's going on. :)

First of all, I know for certain the ath9k interrupt handler is
registered before the driver prints the line saying the name of the
device ("phy1: Atheros 5416"). So any IRQs to IRQ 17 should be seen by
the ath9k handler (ath_isr) after that point, right? Shortly after
that point is where we're seeing the "nobody cared". This seems to
suggest that it registered the handler successfully (because we didn't
get an error message), but the handler returned IRQ_NONE.

Second of all, I'm looking at the ath9k interrupt handler right now,
and there are a few cases where it returns IRQ_NONE. And here's where
I'm a bit fuzzy. Since there could be any number of things using IRQ
17 (though in my case, ath9k is on its own dedicated IRQ), it seems
odd that you check the value of sc->sc_invalid, since the cookie
passed to the handler might not actually be ath9k's cookie if multiple
drivers have registered IRQ handlers for that particular IRQ. Who
knows if what you're reading is even valid? Heck, what if some driver
uses a NULL for their cookie (however unlikely)? You'd get a
segmentation fault on the second line of the interrupt handler. Of
course, I could be completely wrong: does parent interrupt handler
check to see which device driver owns the particular device signaling
an IRQ and then call the appropriate handler?

- Steven
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists