linux-kernel - Re: [ath9k-devel] ath9k: massive unexplained latency in 2.6.27 (rc5, rc6, probably others)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f488382f0809230920m7c42c557m85fda9381fea707e@mail.gmail.com>
Date:	Tue, 23 Sep 2008 09:20:55 -0700
From:	"Steven Noonan" <steven@...inklabs.net>
To:	"Luis R. Rodriguez" <lrodriguez@...eros.com>
Cc:	linux-wireless <linux-wireless@...r.kernel.org>,
	LKML <linux-kernel@...r.kernel.org>,
	"Senthilkumar Balasubramanian" 
	<Senthilkumar.Balasubramanian@...eros.com>,
	"ath9k-devel@...ts.ath9k.org" <ath9k-devel@...ts.ath9k.org>,
	"Luis Rodriguez" <Luis.Rodriguez@...eros.com>,
	"Johannes Berg" <johannes@...solutions.net>,
	"Ingo Molnar" <mingo@...e.hu>
Subject: Re: [ath9k-devel] ath9k: massive unexplained latency in 2.6.27 (rc5, rc6, probably others)

2008/9/23 Steven Noonan <steven@...inklabs.net>:
> 2008/9/23 Steven Noonan <steven@...inklabs.net>:
>> On Mon, Sep 22, 2008 at 9:01 AM, Luis R. Rodriguez
>> <lrodriguez@...eros.com> wrote:
>>> On Mon, Sep 22, 2008 at 8:11 AM, Steven Noonan <steven@...inklabs.net> wrote:
>>>> On Mon, Sep 22, 2008 at 1:06 AM, Luis R. Rodriguez
>>>> <lrodriguez@...eros.com> wrote:
>>>>> Please test the following patch.
>>>>>
>>>>> diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
>>>>> index c262ef2..9a51739 100644
>>>>> --- a/drivers/net/wireless/ath9k/core.c
>>>>> +++ b/drivers/net/wireless/ath9k/core.c
>>>>> @@ -681,10 +681,12 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
>>>>>         * Enable MIB interrupts when there are hardware phy counters.
>>>>>         * Note we only do this (at the moment) for station mode.
>>>>>         */
>>>>> +#if 0
>>>>>        if (ath9k_hw_phycounters(ah) &&
>>>>>            ((sc->sc_ah->ah_opmode == ATH9K_M_STA) ||
>>>>>             (sc->sc_ah->ah_opmode == ATH9K_M_IBSS)))
>>>>>                sc->sc_imask |= ATH9K_INT_MIB;
>>>>> +#endif
>>>>>        /*
>>>>>         * Some hardware processes the TIM IE and fires an
>>>>>         * interrupt when the TIM bit is set.  For hardware
>>>>>
>>>>
>>>> It didn't apply to -rc7, but I managed to apply it manually
>>>> (apparently you made this for wireless-testing?) and added the #if 0.
>>>> After 7 hours uptime with the driver, no apparent interrupt storm.
>>>>
>>>> I'll do more thorough testing later, but I have a 3 hour drive today,
>>>> and some packing to do, so it'll need to wait a bit.
>>>
>>> Yeah I did it for wireless-testing. Good to hear this so far has
>>> solved the issue. I'll port it to 27 and post it once I get your
>>> blessings that this fixed it by a Tested-by.
>>>
>>
>> Okay. I'm in Seattle now.
>>
>> Yes, it solved the issue, but surely an #if 0 isn't a proper solution.
>> What's the actual bug here? I'm afraid the meaning of what's going on
>> here isn't exactly intuitive.
>>
>> Also, I'm doing an 8 hour run with this patch tonight. Maybe more,
>> depends on when I wake up. ;)
>>
>> I think if this resolves the issue on two separate ≈8 hour runs, it
>> should be considered the solution to the issue, unless it resurfaces.
>>
>
> I am only 25 minutes into the run, but I feel this is worth reporting
> before I forget. No IRQ storm thus far, but the connection keeps
> dropping. Or rather, it doesn't disassociate, but while I was
> transferring a large file, it had points of time where it suddenly
> lost and reacquired the connection (signal strength fluctuates wildly
> between 70-90% and then 0% for a second, and then back to
> fluctuating). Perhaps this is related to the lack of aggregation?
>

This 8 hour test passes.

- Steven