BIOS EBDA/lowmem at: 0009e800/0009e800 Initializing cgroup subsys cpuset Linux version 2.6.27-rc7-tip (localuser@localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #2 SMP Mon Sep 22 21:59:13 PDT 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f590000 (usable) BIOS-e820: 000000003f590000 - 000000003f5e3000 (ACPI NVS) BIOS-e820: 000000003f5e3000 - 000000003f5f0000 (ACPI data) BIOS-e820: 000000003f5f0000 - 000000003f600000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) last_pfn = 0x3f590 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37d56000 - 37fef36d Allocated new RAMDISK: 00100000 - 0039936d Move RAMDISK from 0000000037d56000 - 0000000037fef36c to 00100000 - 0039936c DMI 2.5 present. ACPI: RSDP 000F97A0, 0024 (r2 DELL ) ACPI: XSDT 3F5E3080, 005C (r1 DELL FX09 42302E31 AWRD 0) ACPI: FACP 3F5E7200, 00F4 (r3 DELL FX09 42302E31 AWRD 0) ACPI: DSDT 3F5E3200, 3FFC (r1 DELL AWRDACPI 1000 MSFT 3000000) ACPI: FACS 3F590000, 0040 ACPI: HPET 3F5E73C0, 0038 (r1 DELL FX09 42302E31 AWRD 98) ACPI: MCFG 3F5E7400, 003C (r1 DELL FX09 42302E31 AWRD 0) ACPI: SLIC 3F5E7440, 0176 (r1 DELL FX09 42302E31 AWRD 0) ACPI: DMY2 3F5E75C0, 0080 (r1 DELL FX09 42302E31 AWRD 0) ACPI: APIC 3F5E7300, 0084 (r1 DELL FX09 42302E31 AWRD 0) ACPI: SSDT 3F5E7CA0, 0380 (r1 PmRef CpuPm 3000 INTL 20041203) 129MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000085fb0c] TEXT DATA BSS ==> [0000400000 - 000085fb0c] #4 [0000860000 - 0000864000] INIT_PG_TABLE ==> [0000860000 - 0000864000] #5 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000100000 - 000039936d] NEW RAMDISK ==> [0000100000 - 000039936d] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003f590 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x0003f590 On node 0 totalpages: 259374 free_area_init_node: node 0, pgdat c073ba80, node_mem_map c1000000 DMA zone: 3966 pages, LIFO batch:0 Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 32910 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3f600000:a0a00000) dyn_array irq_2_pin_head+0x0/0xc80 size:0xc nr:256 align:0x1000 dyn_array irq_cfgx+0x0/0x4 size:0x1c nr:32 align:0x1000 dyn_array sparse_irqs+0x0/0x4 size:0x80 nr:32 align:0x1000 dyn_array total_size: 0x3000 dyn_array irq_2_pin_head+0x0/0xc80 ==> [0x17f5000 - 0x17f5c00] dyn_array irq_cfgx+0x0/0x4 ==> [0x17f6000 - 0x17f6380] dyn_array sparse_irqs+0x0/0x4 ==> [0x17f7000 - 0x17f8000] kstat_irqs ==> [0x17f8000 - 0x17f8200] PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257346 Kernel command line: ro root=UUID=6a554e8a-e505-4063-9191-b5fe173a644c rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07c1000 soft=c07a1000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2194.214 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1020804k/1037888k available (2243k kernel code, 16360k reserved, 1129k data, 308k init, 132680k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0751000 - 0xc079e000 ( 308 kB) .data : 0xc0630d6b - 0xc074b4a0 (1129 kB) .text : 0xc0400000 - 0xc0630d6b (2243 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.42 BogoMIPS (lpj=2194214) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d APIC calibration not consistent with PM Timer: 244ms instead of 100ms APIC delta adjusted to PM-Timer: 1246873 (3054807) CPU 1 irqstacks, hard=c07c2000 soft=c07a2000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4388.77 BogoMIPS (lpj=2194388) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8777.20 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 832 bytes Booting paravirtualized kernel on bare hardware Time: 5:00:53 Date: 09/23/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [fdf7fffffdf00000, 10000003c] PCI: 0000:00:02.0 reg 14 io port: [ff070000ff00, 10000003c] PCI: 0000:00:02.0 reg 18 32bit mmio: [dfffffffd0000000, 10000003c] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fdeffffffde00000, 10000003c] PCI: 0000:00:1a.0 reg 20 io port: [fe1f0000fe00, 10000003c] PCI: 0000:00:1a.1 reg 20 io port: [fd1f0000fd00, 10000003c] PCI: 0000:00:1a.2 reg 20 io port: [fc1f0000fc00, 10000003c] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fdfff3fffdfff000, 10000003c] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdffbffffdff8000, 10000003c] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [fb1f0000fb00, 10000003c] PCI: 0000:00:1d.1 reg 20 io port: [fa1f0000fa00, 10000003c] PCI: 0000:00:1d.2 reg 20 io port: [f91f0000f900, 10000003c] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdffe3fffdffe000, 10000003c] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [f8070000f800, 10000003c] PCI: 0000:00:1f.2 reg 14 io port: [f7030000f700, 10000003c] PCI: 0000:00:1f.2 reg 18 io port: [f6070000f600, 10000003c] PCI: 0000:00:1f.2 reg 1c io port: [f5030000f500, 10000003c] PCI: 0000:00:1f.2 reg 20 io port: [f40f0000f400, 10000003c] PCI: 0000:00:1f.2 reg 24 io port: [f30f0000f300, 10000003c] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fdffd0fffdffd000, 10000003c] PCI: 0000:00:1f.3 reg 20 io port: [51f00000500, 10000003c] PCI: 0000:00:1f.5 reg 10 io port: [f1070000f100, 10000003c] PCI: 0000:00:1f.5 reg 14 io port: [f0030000f000, 10000003c] PCI: 0000:00:1f.5 reg 18 io port: [ef070000ef00, 10000003c] PCI: 0000:00:1f.5 reg 1c io port: [ee030000ee00, 10000003c] PCI: 0000:00:1f.5 reg 20 io port: [ed0f0000ed00, 10000003c] PCI: 0000:00:1f.5 reg 24 io port: [ec0f0000ec00, 10000003c] PCI: bridge 0000:00:01.0 io port: [cfff0000c000, f6ca2a00f6cf9e5c] PCI: bridge 0000:00:01.0 32bit mmio: [fdaffffffda00000, f6ca2a00f6cf9e5c] PCI: bridge 0000:00:01.0 64bit mmio pref: [fdbffffffdb00000, f6ca2a00f6cf9e5c] PCI: 0000:02:00.0 reg 10 io port: [deff0000de00, 10000003c] PCI: 0000:02:00.0 reg 14 32bit mmio: [fddff0fffddff000, 10000003c] PCI: 0000:02:00.0 reg 30 32bit mmio: [1ffff00000000, 10000003c] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [dfff0000d000, f6ca2c00f6cfca5c] PCI: bridge 0000:00:1e.0 32bit mmio: [fddffffffdd00000, f6ca2c00f6cfca5c] PCI: bridge 0000:00:1e.0 64bit mmio pref: [fdcffffffdc00000, f6ca2c00f6cfca5c] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter ACPI: RTC can wake from S4 system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x297 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:07: ioport range 0x400-0x4bf could not be reserved system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0a: iomem range 0xf0000-0xfffff could not be reserved system 00:0a: iomem range 0x3f600000-0x3f6fffff has been reserved system 00:0a: iomem range 0xfed00000-0xfed000ff could not be reserved system 00:0a: iomem range 0x3f590000-0x3f5fffff could not be reserved system 00:0a: iomem range 0x0-0x9ffff could not be reserved system 00:0a: iomem range 0x100000-0x3f58ffff could not be reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfed14000-0xfed1dfff could not be reserved system 00:0a: iomem range 0xfed20000-0xfed9ffff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0a: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0a: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfda00000-0xfdafffff pci 0000:00:01.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1e.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [c000, cfff] bus: 01 index 1 mmio: [fda00000, fdafffff] bus: 01 index 2 mmio: [fdb00000, fdbfffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [d000, dfff] bus: 02 index 1 mmio: [fdd00000, fddfffff] bus: 02 index 2 mmio: [fdc00000, fdcfffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2660k freed pci 0000:00:02.0: Boot video device input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1222146053.271:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1740 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: SSDT 3F5E7680, 026C (r1 PmRef Cpu0Ist 3000 INTL 20041203) processor ACPI0007:00: registered as cooling_device1 ACPI: SSDT 3F5E7B40, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203) processor ACPI0007:01: registered as cooling_device2 isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G33 Chipset agpgart-intel 0000:00:00.0: detected 7164K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 8:236:12 Freeing unused kernel memory: 308k freed Write protecting the kernel text: 2244k Write protecting the kernel read-only data: 952k ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc7-tip ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 usb 1-3: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb 1-3: configuration #1 chosen from 1 choice usb 1-3: New USB device found, idVendor=04b8, idProduct=012c usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3: Product: EPSON Scanner usb 1-3: Manufacturer: EPSON usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc7-tip ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 6-1: new full speed USB device using uhci_hcd and address 2 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. pata_acpi 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT A disabled pata_acpi 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.5: setting latency timer to 64 pata_acpi 0000:00:1f.5: PCI INT A disabled usb 6-1: configuration #1 chosen from 1 choice hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected usb 6-1: New USB device found, idVendor=0443, idProduct=004f usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Gateway USB Hub Keyboard usb 6-1: Manufacturer: Silitek usb 6-1.1: new full speed USB device using uhci_hcd and address 3 irq 19: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.27-rc7-tip #2 [] __report_bad_irq+0x2e/0x6f [] note_interrupt+0xe7/0x13e [] handle_fasteoi_irq+0x8b/0xb1 [] ? handle_fasteoi_irq+0x0/0xb1 [] do_IRQ+0xab/0xd1 [] common_interrupt+0x23/0x28 [] ? mwait_idle+0x32/0x40 [] cpu_idle+0x74/0x8f [] start_secondary+0x1a9/0x1b1 ======================= handlers: [] (usb_hcd_irq+0x0/0x7c) [] (usb_hcd_irq+0x0/0x7c) Disabling IRQ #19 usb 6-1.1: configuration #1 chosen from 1 choice input: Silitek Gateway USB Hub Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input3 input,hidraw0: USB HID v1.10 Keyboard [Silitek Gateway USB Hub Keyboard] on usb-0000:00:1d.0-1.1 input: Silitek Gateway USB Hub Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input4 input,hidraw1: USB HID v1.10 Device [Silitek Gateway USB Hub Keyboard] on usb-0000:00:1d.0-1.1 usb 6-1.1: New USB device found, idVendor=0443, idProduct=004e usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1.1: Product: Gateway USB Hub Keyboard usb 6-1.1: Manufacturer: Silitek usb 6-1.2: new low speed USB device using uhci_hcd and address 4 usb 6-1.2: configuration #1 chosen from 1 choice input: HID 413c:3010 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input5 input,hidraw2: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.0-1.2 usb 6-1.2: New USB device found, idVendor=413c, idProduct=3010 usb 6-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST31000340AS, SD35, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: NODEV after polling detection ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, D600, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD35 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B D600 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1222146062.280:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 171554 rules. SELinux: 8192 avtab hash slots, 171554 rules. SELinux: 8 users, 12 roles, 2379 types, 117 bools, 1 sens, 1024 cats SELinux: 72 classes, 171554 rules SELinux: permission open in class dir not defined in policy SELinux: permission open in class file not defined in policy SELinux: permission open in class chr_file not defined in policy SELinux: permission open in class blk_file not defined in policy SELinux: permission open in class fifo_file not defined in policy SELinux: the above unknown classes and permissions will be allowed SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1222146062.451:3): policy loaded auid=4294967295 ses=4294967295 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded vendor=8086 device=244e r8169 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth0: RTL8169sb/8110sb at 0xf7dd4000, 00:18:e7:18:52:4e, XID 10000000 IRQ 21 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 set status page addr 0x00033000 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 987988k swap on /dev/sda3. Priority:-1 extents:1 across:987988k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. r8169: eth0: link up r8169: eth0: link up set status page addr 0x00033000 eth0: no IPv6 routers present SELinux: initialized (dev fuse, type fuse), uses genfs_contexts