| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200809281946.03346.prakash@punnoor.de> Date: Sun, 28 Sep 2008 19:45:59 +0200 From: Prakash Punnoor <prakash@...noor.de> To: linux-kernel@...r.kernel.org Subject: 2.6.27-rc-7: BUG: scheduling while atomic: swapper/0/0x00000102 Hi, I got this today: Sep 28 14:36:15 graviton BUG: scheduling while atomic: swapper/0/0x00000102 Sep 28 14:36:15 graviton Modules linked in: Sep 28 14:36:15 graviton CPU 0: Sep 28 14:36:15 graviton Modules linked in: Sep 28 14:36:15 graviton Pid: 0, comm: swapper Not tainted 2.6.27-rc7 #1 Sep 28 14:36:15 graviton RIP: 0010:[<ffffffff8022ccba>] [<ffffffff8022ccba>] default_idle+0x3a/0x40 Sep 28 14:36:15 graviton RSP: 0018:ffffffff807f9f70 EFLAGS: 00000246 Sep 28 14:36:15 graviton RAX: ffffffff807f9fd8 RBX: ffffffff8082f3e0 RCX: 0000000000000000 Sep 28 14:36:15 graviton RDX: ffffffff8084eb20 RSI: 0000000000000092 RDI: ffffffff8088a120 Sep 28 14:36:15 graviton RBP: ffffffff80852700 R08: 0000000000000000 R09: 0000000100294985 Sep 28 14:36:15 graviton R10: 00000000ffffffff R11: ffffffff80237d80 R12: ffffffff8025eeb7 Sep 28 14:36:15 graviton R13: 000002bbd7672100 R14: ffffffff802749bd R15: 0000000000000092 Sep 28 14:36:15 graviton FS: 00007ffe25b04760(0000) GS:ffffffff807f1280(0000) knlGS:0000000000000000 Sep 28 14:36:15 graviton CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Sep 28 14:36:15 graviton CR2: 0000000000000000 CR3: 00000000728b9000 CR4: 00000000000006e0 Sep 28 14:36:15 graviton DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Sep 28 14:36:15 graviton DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Sep 28 14:36:15 graviton Sep 28 14:36:15 graviton Call Trace: Sep 28 14:36:15 graviton [<ffffffff8022cd58>] ? c1e_idle+0x98/0xe0 Sep 28 14:36:15 graviton [<ffffffff80222b9e>] ? cpu_idle+0x5e/0xf0 Sep 28 14:36:15 graviton I guess I can work-around this when disabling c1e in BIOS, but didn't try that so far. Any idea. Following the complete dmesg and attached the config Sep 28 15:46:43 graviton syslog-ng[2193]: syslog-ng starting up; version='2.0.9' Sep 28 15:46:43 graviton Linux version 2.6.27-rc7 (light@...viton) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #1 SMP PREEMPT Wed Sep 24 18:42:22 CEST 2008 Sep 28 15:46:43 graviton Command line: root=/dev/md1 init=/sbin/init sata_nv.swncq=1 snd-hda-intel.enable_msi=1 Sep 28 15:46:43 graviton KERNEL supported cpus: Sep 28 15:46:43 graviton Intel GenuineIntel Sep 28 15:46:43 graviton AMD AuthenticAMD Sep 28 15:46:43 graviton Centaur CentaurHauls Sep 28 15:46:43 graviton BIOS-provided physical RAM map: Sep 28 15:46:43 graviton BIOS-e820: 0000000000000000 - 000000000009f400 (usable) Sep 28 15:46:43 graviton BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) Sep 28 15:46:43 graviton BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 28 15:46:43 graviton BIOS-e820: 0000000000100000 - 000000007bfe0000 (usable) Sep 28 15:46:43 graviton BIOS-e820: 000000007bfe0000 - 000000007bfe3000 (ACPI NVS) Sep 28 15:46:43 graviton BIOS-e820: 000000007bfe3000 - 000000007bff0000 (ACPI data) Sep 28 15:46:43 graviton BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved) Sep 28 15:46:43 graviton BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 28 15:46:43 graviton BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Sep 28 15:46:43 graviton last_pfn = 0x7bfe0 max_arch_pfn = 0x3ffffffff Sep 28 15:46:43 graviton x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Sep 28 15:46:43 graviton init_memory_mapping Sep 28 15:46:43 graviton 0000000000 - 007be00000 page 2M Sep 28 15:46:43 graviton 007be00000 - 007bfe0000 page 4k Sep 28 15:46:43 graviton kernel direct mapping tables up to 7bfe0000 @ 8000-c000 Sep 28 15:46:43 graviton last_map_addr: 7bfe0000 end: 7bfe0000 Sep 28 15:46:43 graviton DMI 2.5 present. Sep 28 15:46:43 graviton ACPI: RSDP 000F8350, 0024 (r2 RS780 ) Sep 28 15:46:43 graviton ACPI: RSDT 7BFE3000, 0038 (r1 RS780 AWRDACPI 42302E31 AWRD 0) Sep 28 15:46:43 graviton ACPI: FACP 7BFE3080, 0074 (r1 RS780 AWRDACPI 42302E31 AWRD 0) Sep 28 15:46:43 graviton ACPI: DSDT 7BFE3100, 6BFA (r1 RS780 AWRDACPI 1000 MSFT 3000000) Sep 28 15:46:43 graviton ACPI: FACS 7BFE0000, 0040 Sep 28 15:46:43 graviton ACPI: SSDT 7BFE9DC0, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) Sep 28 15:46:43 graviton ACPI: HPET 7BFE9FC0, 0038 (r1 RS780 AWRDACPI 42302E31 AWRD 98) Sep 28 15:46:43 graviton ACPI: MCFG 7BFEA000, 003C (r1 RS780 AWRDACPI 42302E31 AWRD 0) Sep 28 15:46:43 graviton ACPI: APIC 7BFE9D00, 0084 (r1 RS780 AWRDACPI 42302E31 AWRD 0) Sep 28 15:46:43 graviton (5 early reservations) ==> bootmem [0000000000 - 007bfe0000] Sep 28 15:46:43 graviton #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 28 15:46:43 graviton #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] Sep 28 15:46:43 graviton #2 [0000200000 - 00008bd6c0] TEXT DATA BSS ==> [0000200000 - 00008bd6c0] Sep 28 15:46:43 graviton #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] Sep 28 15:46:43 graviton #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] Sep 28 15:46:43 graviton found SMP MP-table at [ffff8800000f4310] 000f4310 Sep 28 15:46:43 graviton [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Sep 28 15:46:43 graviton Zone PFN ranges: Sep 28 15:46:43 graviton DMA 0x00000000 -> 0x00001000 Sep 28 15:46:43 graviton DMA32 0x00001000 -> 0x00100000 Sep 28 15:46:43 graviton Normal 0x00100000 -> 0x00100000 Sep 28 15:46:43 graviton Movable zone start PFN for each node Sep 28 15:46:43 graviton early_node_map[2] active PFN ranges Sep 28 15:46:43 graviton 0: 0x00000000 -> 0x0000009f Sep 28 15:46:43 graviton 0: 0x00000100 -> 0x0007bfe0 Sep 28 15:46:43 graviton On node 0 totalpages: 507775 Sep 28 15:46:43 graviton DMA zone: 2114 pages, LIFO batch:0 Sep 28 15:46:43 graviton DMA32 zone: 496888 pages, LIFO batch:31 Sep 28 15:46:43 graviton Detected use of extended apic ids on hypertransport bus Sep 28 15:46:43 graviton ACPI: PM-Timer IO Port: 0x4008 Sep 28 15:46:43 graviton ACPI: Local APIC address 0xfee00000 Sep 28 15:46:43 graviton ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 28 15:46:43 graviton ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Sep 28 15:46:43 graviton ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) Sep 28 15:46:43 graviton ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) Sep 28 15:46:43 graviton ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 28 15:46:43 graviton ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Sep 28 15:46:43 graviton ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Sep 28 15:46:43 graviton ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Sep 28 15:46:43 graviton ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) Sep 28 15:46:43 graviton IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 Sep 28 15:46:43 graviton ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 28 15:46:43 graviton ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Sep 28 15:46:43 graviton ACPI: IRQ0 used by override. Sep 28 15:46:43 graviton ACPI: IRQ2 used by override. Sep 28 15:46:43 graviton ACPI: IRQ9 used by override. Sep 28 15:46:43 graviton Setting APIC routing to flat Sep 28 15:46:43 graviton ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Sep 28 15:46:43 graviton Using ACPI (MADT) for SMP configuration information Sep 28 15:46:43 graviton SMP: Allowing 2 CPUs, 0 hotplug CPUs Sep 28 15:46:43 graviton Allocating PCI resources starting at 80000000 (gap: 7c000000:64000000) Sep 28 15:46:43 graviton PERCPU: Allocating 49056 bytes of per cpu data Sep 28 15:46:43 graviton NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Sep 28 15:46:43 graviton Built 1 zonelists in Zone order, mobility grouping on. Total pages: 499002 Sep 28 15:46:43 graviton Kernel command line: root=/dev/md1 init=/sbin/init sata_nv.swncq=1 snd-hda-intel.enable_msi=1 Sep 28 15:46:43 graviton Initializing CPU#0 Sep 28 15:46:43 graviton PID hash table entries: 4096 (order: 12, 32768 bytes) Sep 28 15:46:43 graviton TSC: PIT calibration confirmed by PMTIMER. Sep 28 15:46:43 graviton TSC: using PIT calibration value Sep 28 15:46:43 graviton Detected 2000.414 MHz processor. Sep 28 15:46:43 graviton Console: colour VGA+ 80x25 Sep 28 15:46:43 graviton console [tty0] enabled Sep 28 15:46:43 graviton Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Sep 28 15:46:43 graviton Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Sep 28 15:46:43 graviton Checking aperture... Sep 28 15:46:43 graviton No AGP bridge found Sep 28 15:46:43 graviton Node 0: aperture @ 9780000000 size 32 MB Sep 28 15:46:43 graviton Aperture beyond 4GB. Ignoring. Sep 28 15:46:43 graviton Memory: 1991520k/2031488k available (4326k kernel code, 38960k reserved, 1709k data, 324k init) Sep 28 15:46:43 graviton CPA: page pool initialized 1 of 1 pages preallocated Sep 28 15:46:43 graviton SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Sep 28 15:46:43 graviton hpet clockevent registered Sep 28 15:46:43 graviton Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.82 BogoMIPS (lpj=2000414) Sep 28 15:46:43 graviton Mount-cache hash table entries: 256 Sep 28 15:46:43 graviton CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 28 15:46:43 graviton CPU: L2 Cache: 512K (64 bytes/line) Sep 28 15:46:43 graviton tseg: 0000000000 Sep 28 15:46:43 graviton CPU: Physical Processor ID: 0 Sep 28 15:46:43 graviton CPU: Processor Core ID: 0 Sep 28 15:46:43 graviton using C1E aware idle routine Sep 28 15:46:43 graviton ACPI: Core revision 20080609 Sep 28 15:46:43 graviton ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 28 15:46:43 graviton CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Sep 28 15:46:43 graviton Using local APIC timer interrupts. Sep 28 15:46:43 graviton APIC timer calibration result 12502585 Sep 28 15:46:43 graviton Detected 12.502 MHz APIC timer. Sep 28 15:46:43 graviton Booting processor 1/1 ip 6000 Sep 28 15:46:43 graviton Initializing CPU#1 Sep 28 15:46:43 graviton Calibrating delay using timer specific routine.. 4000.73 BogoMIPS (lpj=2000367) Sep 28 15:46:43 graviton CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Sep 28 15:46:43 graviton CPU: L2 Cache: 512K (64 bytes/line) Sep 28 15:46:43 graviton CPU: Physical Processor ID: 0 Sep 28 15:46:43 graviton CPU: Processor Core ID: 1 Sep 28 15:46:43 graviton x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 Sep 28 15:46:43 graviton System has C1E enabled Sep 28 15:46:43 graviton CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Sep 28 15:46:43 graviton Brought up 2 CPUs Sep 28 15:46:43 graviton Total of 2 processors activated (8001.56 BogoMIPS). Sep 28 15:46:43 graviton net_namespace: 1152 bytes Sep 28 15:46:43 graviton xor: automatically using best checksumming function: generic_sse Sep 28 15:46:43 graviton Switch to broadcast mode on CPU1 Sep 28 15:46:43 graviton generic_sse: 6120.000 MB/sec Sep 28 15:46:43 graviton xor: using function: generic_sse (6120.000 MB/sec) Sep 28 15:46:43 graviton Switch to broadcast mode on CPU0 Sep 28 15:46:43 graviton NET: Registered protocol family 16 Sep 28 15:46:43 graviton No dock devices found. Sep 28 15:46:43 graviton node 0 link 0: io port [c000, ffff] Sep 28 15:46:43 graviton TOM: 0000000080000000 aka 2048M Sep 28 15:46:43 graviton node 0 link 0: mmio [a0000, bffff] Sep 28 15:46:43 graviton node 0 link 0: mmio [80000000, fd9fffff] Sep 28 15:46:43 graviton node 0 link 0: mmio [fdc00000, ffffffff] Sep 28 15:46:43 graviton bus: [00,03] on node 0 link 0 Sep 28 15:46:43 graviton bus: 00 index 0 io port: [0, ffff] Sep 28 15:46:43 graviton bus: 00 index 1 mmio: [a0000, bffff] Sep 28 15:46:43 graviton bus: 00 index 2 mmio: [80000000, fdbfffff] Sep 28 15:46:43 graviton bus: 00 index 3 mmio: [fdc00000, fcffffffff] Sep 28 15:46:43 graviton ACPI: bus type pci registered Sep 28 15:46:43 graviton PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 28 15:46:43 graviton PCI: MCFG area at e0000000 reserved in E820 Sep 28 15:46:43 graviton PCI: Using MMCONFIG at e0000000 - efffffff Sep 28 15:46:43 graviton PCI: Using configuration type 1 for base access Sep 28 15:46:43 graviton ACPI: EC: Look up EC in DSDT Sep 28 15:46:43 graviton ACPI: Interpreter enabled Sep 28 15:46:43 graviton ACPI: (supports S0 S3 S5) Sep 28 15:46:43 graviton ACPI: Using IOAPIC for interrupt routing Sep 28 15:46:43 graviton ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 28 15:46:43 graviton PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff] Sep 28 15:46:43 graviton pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold Sep 28 15:46:43 graviton pci 0000:00:0a.0: PME# disabled Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 10 io port: [ff00, ff07] Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 14 io port: [fe00, fe03] Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 18 io port: [fd00, fd07] Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 1c io port: [fc00, fc03] Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 20 io port: [fb00, fb0f] Sep 28 15:46:43 graviton PCI: 0000:00:11.0 reg 24 32bit mmio: [fe02f000, fe02f3ff] Sep 28 15:46:43 graviton pci 0000:00:11.0: set SATA to AHCI mode Sep 28 15:46:43 graviton PCI: 0000:00:12.0 reg 10 32bit mmio: [fe02e000, fe02efff] Sep 28 15:46:43 graviton PCI: 0000:00:12.1 reg 10 32bit mmio: [fe02d000, fe02dfff] Sep 28 15:46:43 graviton PCI: 0000:00:12.2 reg 10 32bit mmio: [fe02c000, fe02c0ff] Sep 28 15:46:43 graviton pci 0000:00:12.2: supports D1 Sep 28 15:46:43 graviton pci 0000:00:12.2: supports D2 Sep 28 15:46:43 graviton pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot Sep 28 15:46:43 graviton pci 0000:00:12.2: PME# disabled Sep 28 15:46:43 graviton PCI: 0000:00:13.0 reg 10 32bit mmio: [fe02b000, fe02bfff] Sep 28 15:46:43 graviton PCI: 0000:00:13.1 reg 10 32bit mmio: [fe02a000, fe02afff] Sep 28 15:46:43 graviton PCI: 0000:00:13.2 reg 10 32bit mmio: [fe029000, fe0290ff] Sep 28 15:46:43 graviton pci 0000:00:13.2: supports D1 Sep 28 15:46:43 graviton pci 0000:00:13.2: supports D2 Sep 28 15:46:43 graviton pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot Sep 28 15:46:43 graviton pci 0000:00:13.2: PME# disabled Sep 28 15:46:43 graviton PCI: 0000:00:14.1 reg 10 io port: [0, 7] Sep 28 15:46:43 graviton PCI: 0000:00:14.1 reg 14 io port: [0, 3] Sep 28 15:46:43 graviton PCI: 0000:00:14.1 reg 18 io port: [0, 7] Sep 28 15:46:43 graviton PCI: 0000:00:14.1 reg 1c io port: [0, 3] Sep 28 15:46:43 graviton PCI: 0000:00:14.1 reg 20 io port: [fa00, fa0f] Sep 28 15:46:43 graviton PCI: 0000:00:14.2 reg 10 64bit mmio: [fe024000, fe027fff] Sep 28 15:46:43 graviton pci 0000:00:14.2: PME# supported from D0 D3hot D3cold Sep 28 15:46:43 graviton pci 0000:00:14.2: PME# disabled Sep 28 15:46:43 graviton PCI: 0000:01:05.0 reg 10 32bit mmio: [f8000000, fbffffff] Sep 28 15:46:43 graviton PCI: 0000:01:05.0 reg 14 io port: [ee00, eeff] Sep 28 15:46:43 graviton PCI: 0000:01:05.0 reg 18 32bit mmio: [fdef0000, fdefffff] Sep 28 15:46:43 graviton PCI: 0000:01:05.0 reg 24 32bit mmio: [fdd00000, fddfffff] Sep 28 15:46:43 graviton pci 0000:01:05.0: supports D1 Sep 28 15:46:43 graviton pci 0000:01:05.0: supports D2 Sep 28 15:46:43 graviton PCI: bridge 0000:00:01.0 io port: [e000, efff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:01.0 32bit mmio: [fdd00000, fdefffff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:01.0 64bit mmio pref: [f8000000, fbffffff] Sep 28 15:46:43 graviton PCI: 0000:02:00.0 reg 10 64bit mmio: [fdcfc000, fdcfffff] Sep 28 15:46:43 graviton PCI: 0000:02:00.0 reg 18 io port: [de00, deff] Sep 28 15:46:43 graviton PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] Sep 28 15:46:43 graviton pci 0000:02:00.0: supports D1 Sep 28 15:46:43 graviton pci 0000:02:00.0: supports D2 Sep 28 15:46:43 graviton pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Sep 28 15:46:43 graviton pci 0000:02:00.0: PME# disabled Sep 28 15:46:43 graviton PCI: bridge 0000:00:0a.0 io port: [d000, dfff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:0a.0 32bit mmio: [fdc00000, fdcfffff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:0a.0 64bit mmio pref: [fdf00000, fdffffff] Sep 28 15:46:43 graviton pci 0000:00:14.4: transparent bridge Sep 28 15:46:43 graviton PCI: bridge 0000:00:14.4 io port: [c000, cfff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:14.4 32bit mmio: [fdb00000, fdbfffff] Sep 28 15:46:43 graviton PCI: bridge 0000:00:14.4 32bit mmio pref: [fda00000, fdafffff] Sep 28 15:46:43 graviton bus 00 -> node 0 Sep 28 15:46:43 graviton ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 28 15:46:43 graviton ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] Sep 28 15:46:43 graviton ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] Sep 28 15:46:43 graviton ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. Sep 28 15:46:43 graviton Linux Plug and Play Support v0.97 (c) Adam Belay Sep 28 15:46:43 graviton pnp: PnP ACPI init Sep 28 15:46:43 graviton ACPI: bus type pnp registered Sep 28 15:46:43 graviton pnp 00:09: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling Sep 28 15:46:43 graviton pnp 00:09: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling Sep 28 15:46:43 graviton pnp 00:09: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling Sep 28 15:46:43 graviton pnp 00:09: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling Sep 28 15:46:43 graviton pnp 00:09: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling Sep 28 15:46:43 graviton pnp: PnP ACPI: found 10 devices Sep 28 15:46:43 graviton ACPI: ACPI bus type pnp unregistered Sep 28 15:46:43 graviton SCSI subsystem initialized Sep 28 15:46:43 graviton libata version 3.00 loaded. Sep 28 15:46:43 graviton usbcore: registered new interface driver usbfs Sep 28 15:46:43 graviton usbcore: registered new interface driver hub Sep 28 15:46:43 graviton usbcore: registered new device driver usb Sep 28 15:46:43 graviton PCI: Using ACPI for IRQ routing Sep 28 15:46:43 graviton pci 0000:00:00.0: BAR 3: can't allocate resource Sep 28 15:46:43 graviton DMAR:parse DMAR table failure. Sep 28 15:46:43 graviton hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 Sep 28 15:46:43 graviton hpet0: 4 32-bit timers, 14318180 Hz Sep 28 15:46:43 graviton Switched to high resolution mode on CPU 0 Sep 28 15:46:43 graviton Switched to high resolution mode on CPU 1 Sep 28 15:46:43 graviton system 00:01: ioport range 0x4100-0x411f has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0x228-0x22f has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0x40b-0x40b has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0x4d6-0x4d6 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xc00-0xc01 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xc14-0xc14 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xc50-0xc52 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xc6c-0xc6d has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xc6f-0xc6f has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xcd0-0xcd1 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xcd2-0xcd3 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xcd4-0xcdf has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0x4000-0x40fe has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0x4210-0x4217 has been reserved Sep 28 15:46:43 graviton system 00:01: ioport range 0xb10-0xb1f has been reserved Sep 28 15:46:43 graviton system 00:07: ioport range 0x4d0-0x4d1 has been reserved Sep 28 15:46:43 graviton system 00:09: iomem range 0xf0000-0xfffff could not be reserved Sep 28 15:46:43 graviton system 00:09: iomem range 0x7bfe0000-0x7bffffff could not be reserved Sep 28 15:46:43 graviton system 00:09: iomem range 0x0-0x9ffff could not be reserved Sep 28 15:46:43 graviton system 00:09: iomem range 0x100000-0x7bfdffff could not be reserved Sep 28 15:46:43 graviton system 00:09: iomem range 0x7c000000-0x7fffffff has been reserved Sep 28 15:46:43 graviton pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 Sep 28 15:46:43 graviton pci 0000:00:01.0: IO window: 0xe000-0xefff Sep 28 15:46:43 graviton pci 0000:00:01.0: MEM window: 0xfdd00000-0xfdefffff Sep 28 15:46:43 graviton pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff Sep 28 15:46:43 graviton pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 Sep 28 15:46:43 graviton pci 0000:00:0a.0: IO window: 0xd000-0xdfff Sep 28 15:46:43 graviton pci 0000:00:0a.0: MEM window: 0xfdc00000-0xfdcfffff Sep 28 15:46:43 graviton pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff Sep 28 15:46:43 graviton pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 Sep 28 15:46:43 graviton pci 0000:00:14.4: IO window: 0xc000-0xcfff Sep 28 15:46:43 graviton pci 0000:00:14.4: MEM window: 0xfdb00000-0xfdbfffff Sep 28 15:46:43 graviton pci 0000:00:14.4: PREFETCH window: 0x000000fda00000-0x000000fdafffff Sep 28 15:46:43 graviton pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 28 15:46:43 graviton pci 0000:00:0a.0: setting latency timer to 64 Sep 28 15:46:43 graviton bus: 00 index 0 io port: [0, ffff] Sep 28 15:46:43 graviton bus: 00 index 1 mmio: [0, ffffffffffffffff] Sep 28 15:46:43 graviton bus: 01 index 0 io port: [e000, efff] Sep 28 15:46:43 graviton bus: 01 index 1 mmio: [fdd00000, fdefffff] Sep 28 15:46:43 graviton bus: 01 index 2 mmio: [f8000000, fbffffff] Sep 28 15:46:43 graviton bus: 01 index 3 mmio: [0, 0] Sep 28 15:46:43 graviton bus: 02 index 0 io port: [d000, dfff] Sep 28 15:46:43 graviton bus: 02 index 1 mmio: [fdc00000, fdcfffff] Sep 28 15:46:43 graviton bus: 02 index 2 mmio: [fdf00000, fdffffff] Sep 28 15:46:43 graviton bus: 02 index 3 mmio: [0, 0] Sep 28 15:46:43 graviton bus: 03 index 0 io port: [c000, cfff] Sep 28 15:46:43 graviton bus: 03 index 1 mmio: [fdb00000, fdbfffff] Sep 28 15:46:43 graviton bus: 03 index 2 mmio: [fda00000, fdafffff] Sep 28 15:46:43 graviton bus: 03 index 3 io port: [0, ffff] Sep 28 15:46:43 graviton bus: 03 index 4 mmio: [0, ffffffffffffffff] Sep 28 15:46:43 graviton NET: Registered protocol family 2 Sep 28 15:46:43 graviton IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Sep 28 15:46:43 graviton TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Sep 28 15:46:43 graviton TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Sep 28 15:46:43 graviton TCP: Hash tables configured (established 262144 bind 65536) Sep 28 15:46:43 graviton TCP reno registered Sep 28 15:46:43 graviton NET: Registered protocol family 1 Sep 28 15:46:43 graviton HugeTLB registered 2 MB page size, pre-allocated 0 pages Sep 28 15:46:43 graviton Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). Sep 28 15:46:43 graviton msgmni has been set to 3890 Sep 28 15:46:43 graviton async_tx: api initialized (sync-only) Sep 28 15:46:43 graviton Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) Sep 28 15:46:43 graviton io scheduler noop registered Sep 28 15:46:43 graviton io scheduler anticipatory registered Sep 28 15:46:43 graviton io scheduler deadline registered (default) Sep 28 15:46:43 graviton io scheduler cfq registered Sep 28 15:46:43 graviton pci 0000:01:05.0: Boot video device Sep 28 15:46:43 graviton pcieport-driver 0000:00:0a.0: setting latency timer to 64 Sep 28 15:46:43 graviton pcieport-driver 0000:00:0a.0: found MSI capability Sep 28 15:46:43 graviton pci_express 0000:00:0a.0:pcie00: allocate port service Sep 28 15:46:43 graviton input: Power Button (FF) as /class/input/input0 Sep 28 15:46:43 graviton ACPI: Power Button (FF) [PWRF] Sep 28 15:46:43 graviton input: Power Button (CM) as /class/input/input1 Sep 28 15:46:43 graviton ACPI: Power Button (CM) [PWRB] Sep 28 15:46:43 graviton fan PNP0C0B:00: registered as cooling_device0 Sep 28 15:46:43 graviton ACPI: Fan [FAN] (on) Sep 28 15:46:43 graviton processor ACPI0007:00: registered as cooling_device1 Sep 28 15:46:43 graviton processor ACPI0007:01: registered as cooling_device2 Sep 28 15:46:43 graviton ACPI: Expecting a [Reference] package element, found type 0 Sep 28 15:46:43 graviton thermal LNXTHERM:01: registered as thermal_zone0 Sep 28 15:46:43 graviton ACPI: Thermal Zone [THRM] (23 C) Sep 28 15:46:43 graviton lp: driver loaded but no devices found Sep 28 15:46:43 graviton Real Time Clock Driver v1.12ac Sep 28 15:46:43 graviton hpet_resources: 0xfed00000 is busy Sep 28 15:46:43 graviton Non-volatile memory driver v1.2 Sep 28 15:46:43 graviton Linux agpgart interface v0.103 Sep 28 15:46:43 graviton Serial: 8250/16550 driver4 ports, IRQ sharing disabled Sep 28 15:46:43 graviton loop: module loaded Sep 28 15:46:43 graviton sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 28 15:46:43 graviton sky2 0000:02:00.0: setting latency timer to 64 Sep 28 15:46:43 graviton sky2 0000:02:00.0: v1.22 addr 0xfdcfc000 irq 18 Yukon-2 EC Ultra rev 3 Sep 28 15:46:43 graviton sky2 eth0: addr 00:18:37:04:39:c2 Sep 28 15:46:43 graviton tun: Universal TUN/TAP device driver, 1.6 Sep 28 15:46:43 graviton tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> Sep 28 15:46:43 graviton Driver 'sd' needs updating - please use bus_type methods Sep 28 15:46:43 graviton Driver 'sr' needs updating - please use bus_type methods Sep 28 15:46:43 graviton ahci 0000:00:11.0: version 3.0 Sep 28 15:46:43 graviton ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Sep 28 15:46:43 graviton ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode Sep 28 15:46:43 graviton ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio Sep 28 15:46:43 graviton scsi0 : ahci Sep 28 15:46:43 graviton scsi1 : ahci Sep 28 15:46:43 graviton scsi2 : ahci Sep 28 15:46:43 graviton scsi3 : ahci Sep 28 15:46:43 graviton ata1: SATA max UDMA/133 abar m1024@...e02f000 port 0xfe02f100 irq 317 Sep 28 15:46:43 graviton ata2: SATA max UDMA/133 abar m1024@...e02f000 port 0xfe02f180 irq 317 Sep 28 15:46:43 graviton ata3: SATA max UDMA/133 abar m1024@...e02f000 port 0xfe02f200 irq 317 Sep 28 15:46:43 graviton ata4: SATA max UDMA/133 abar m1024@...e02f000 port 0xfe02f280 irq 317 Sep 28 15:46:43 graviton ata1: softreset failed (device not ready) Sep 28 15:46:43 graviton ata1: failed due to HW bug, retry pmp=0 Sep 28 15:46:43 graviton ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 28 15:46:43 graviton ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 Sep 28 15:46:43 graviton ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) Sep 28 15:46:43 graviton ata1.00: configured for UDMA/133 Sep 28 15:46:43 graviton ata2: softreset failed (device not ready) Sep 28 15:46:43 graviton ata2: failed due to HW bug, retry pmp=0 Sep 28 15:46:43 graviton ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 28 15:46:43 graviton ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 Sep 28 15:46:43 graviton ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) Sep 28 15:46:43 graviton ata2.00: configured for UDMA/133 Sep 28 15:46:43 graviton ata3: softreset failed (device not ready) Sep 28 15:46:43 graviton ata3: failed due to HW bug, retry pmp=0 Sep 28 15:46:43 graviton ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Sep 28 15:46:43 graviton ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 Sep 28 15:46:43 graviton ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) Sep 28 15:46:43 graviton ata3.00: configured for UDMA/133 Sep 28 15:46:43 graviton ata4: SATA link down (SStatus 0 SControl 300) Sep 28 15:46:43 graviton scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Write Protect is off Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Write Protect is off Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > Sep 28 15:46:43 graviton sd 0:0:0:0: [sda] Attached SCSI disk Sep 28 15:46:43 graviton sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 28 15:46:43 graviton scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Write Protect is off Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Write Protect is off Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 > Sep 28 15:46:43 graviton sd 1:0:0:0: [sdb] Attached SCSI disk Sep 28 15:46:43 graviton sd 1:0:0:0: Attached scsi generic sg1 type 0 Sep 28 15:46:43 graviton scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Write Protect is off Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Write Protect is off Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 15:46:43 graviton sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 > Sep 28 15:46:43 graviton sd 2:0:0:0: [sdc] Attached SCSI disk Sep 28 15:46:43 graviton sd 2:0:0:0: Attached scsi generic sg2 type 0 Sep 28 15:46:43 graviton pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 28 15:46:43 graviton scsi4 : pata_atiixp Sep 28 15:46:43 graviton scsi5 : pata_atiixp Sep 28 15:46:43 graviton ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 Sep 28 15:46:43 graviton ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 Sep 28 15:46:43 graviton ata5.01: NODEV after polling detection Sep 28 15:46:43 graviton ata5.00: ATAPI: NU DVDRW DDW-081, BX32, max UDMA/33 Sep 28 15:46:43 graviton ata5.00: configured for UDMA/33 Sep 28 15:46:43 graviton isa bounce pool size: 16 pages Sep 28 15:46:43 graviton scsi 4:0:0:0: CD-ROM NU DVDRW DDW-081 BX32 PQ: 0 ANSI: 5 Sep 28 15:46:43 graviton sr0: scsi3-mmc drive: 12x/40x writer cd/rw xa/form2 cdda tray Sep 28 15:46:43 graviton Uniform CD-ROM driver Revision: 3.20 Sep 28 15:46:43 graviton sr 4:0:0:0: Attached scsi CD-ROM sr0 Sep 28 15:46:43 graviton sr 4:0:0:0: Attached scsi generic sg3 type 5 Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: EHCI Host Controller Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: debug port 1 Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 Sep 28 15:46:43 graviton ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 28 15:46:43 graviton usb usb1: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 1-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 1-0:1.0: 6 ports detected Sep 28 15:46:43 graviton usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Sep 28 15:46:43 graviton usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb1: Product: EHCI Host Controller Sep 28 15:46:43 graviton usb usb1: Manufacturer: Linux 2.6.27-rc7 ehci_hcd Sep 28 15:46:43 graviton usb usb1: SerialNumber: 0000:00:12.2 Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: EHCI Host Controller Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: debug port 1 Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 Sep 28 15:46:43 graviton ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Sep 28 15:46:43 graviton usb usb2: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 2-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 2-0:1.0: 6 ports detected Sep 28 15:46:43 graviton usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Sep 28 15:46:43 graviton usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb2: Product: EHCI Host Controller Sep 28 15:46:43 graviton usb usb2: Manufacturer: Linux 2.6.27-rc7 ehci_hcd Sep 28 15:46:43 graviton usb usb2: SerialNumber: 0000:00:13.2 Sep 28 15:46:43 graviton ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.0: OHCI Host Controller Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 Sep 28 15:46:43 graviton usb usb3: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 3-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 3-0:1.0: 3 ports detected Sep 28 15:46:43 graviton usb 2-1: new high speed USB device using ehci_hcd and address 2 Sep 28 15:46:43 graviton usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Sep 28 15:46:43 graviton usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb3: Product: OHCI Host Controller Sep 28 15:46:43 graviton usb usb3: Manufacturer: Linux 2.6.27-rc7 ohci_hcd Sep 28 15:46:43 graviton usb usb3: SerialNumber: 0000:00:12.0 Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.1: OHCI Host Controller Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 Sep 28 15:46:43 graviton ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 Sep 28 15:46:43 graviton usb usb4: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 4-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 4-0:1.0: 3 ports detected Sep 28 15:46:43 graviton usb 2-1: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 2-1:1.0: USB hub found Sep 28 15:46:43 graviton hub 2-1:1.0: 3 ports detected Sep 28 15:46:43 graviton usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Sep 28 15:46:43 graviton usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb4: Product: OHCI Host Controller Sep 28 15:46:43 graviton usb usb4: Manufacturer: Linux 2.6.27-rc7 ohci_hcd Sep 28 15:46:43 graviton usb usb4: SerialNumber: 0000:00:12.1 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.0: OHCI Host Controller Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 Sep 28 15:46:43 graviton usb usb5: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 5-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 5-0:1.0: 3 ports detected Sep 28 15:46:43 graviton usb 2-1: New USB device found, idVendor=056d, idProduct=0000 Sep 28 15:46:43 graviton usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 28 15:46:43 graviton usb 2-1: Product: USB HUB Sep 28 15:46:43 graviton usb 2-1: Manufacturer: EIZO Sep 28 15:46:43 graviton usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Sep 28 15:46:43 graviton usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb5: Product: OHCI Host Controller Sep 28 15:46:43 graviton usb usb5: Manufacturer: Linux 2.6.27-rc7 ohci_hcd Sep 28 15:46:43 graviton usb usb5: SerialNumber: 0000:00:13.0 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.1: OHCI Host Controller Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 Sep 28 15:46:43 graviton ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 Sep 28 15:46:43 graviton usb usb6: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton hub 6-0:1.0: USB hub found Sep 28 15:46:43 graviton hub 6-0:1.0: 3 ports detected Sep 28 15:46:43 graviton usb 2-1.2: new full speed USB device using ehci_hcd and address 5 Sep 28 15:46:43 graviton usb 2-1.2: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton usb 2-1.2: New USB device found, idVendor=1a86, idProduct=7584 Sep 28 15:46:43 graviton usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Sep 28 15:46:43 graviton usb 2-1.2: Product: USB2.0-Print Sep 28 15:46:43 graviton usb 2-1.3: new full speed USB device using ehci_hcd and address 6 Sep 28 15:46:43 graviton usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Sep 28 15:46:43 graviton usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Sep 28 15:46:43 graviton usb usb6: Product: OHCI Host Controller Sep 28 15:46:43 graviton usb usb6: Manufacturer: Linux 2.6.27-rc7 ohci_hcd Sep 28 15:46:43 graviton usb usb6: SerialNumber: 0000:00:13.1 Sep 28 15:46:43 graviton usb 2-1.3: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton usb 2-1.3: New USB device found, idVendor=056d, idProduct=0002 Sep 28 15:46:43 graviton usb 2-1.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 Sep 28 15:46:43 graviton usb 2-1.3: Product: EIZO USB HID Monitor Sep 28 15:46:43 graviton usb 2-1.3: Manufacturer: EIZO Sep 28 15:46:43 graviton usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584 Sep 28 15:46:43 graviton usbcore: registered new interface driver usblp Sep 28 15:46:43 graviton Initializing USB Mass Storage driver... Sep 28 15:46:43 graviton usb 5-2: new low speed USB device using ohci_hcd and address 2 Sep 28 15:46:43 graviton usb 5-2: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton usb 5-2: New USB device found, idVendor=04d9, idProduct=0499 Sep 28 15:46:43 graviton usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Sep 28 15:46:43 graviton usbcore: registered new interface driver usb-storage Sep 28 15:46:43 graviton USB Mass Storage support registered. Sep 28 15:46:43 graviton usb 6-3: new full speed USB device using ohci_hcd and address 2 Sep 28 15:46:43 graviton usb 6-3: configuration #1 chosen from 1 choice Sep 28 15:46:43 graviton usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004 Sep 28 15:46:43 graviton usb 6-3: New USB device found, idVendor=03f0, idProduct=1004 Sep 28 15:46:43 graviton usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Sep 28 15:46:43 graviton usb 6-3: Product: DeskJet 970C Sep 28 15:46:43 graviton usb 6-3: Manufacturer: Hewlett-Packard Sep 28 15:46:43 graviton usb 6-3: SerialNumber: ES97N1305KJQ Sep 28 15:46:43 graviton usbcore: registered new interface driver libusual Sep 28 15:46:43 graviton PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Sep 28 15:46:43 graviton PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Sep 28 15:46:43 graviton serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 28 15:46:43 graviton mice: PS/2 mouse device common for all mice Sep 28 15:46:43 graviton input: AT Translated Set 2 keyboard as /class/input/input2 Sep 28 15:46:43 graviton i2c /dev entries driver Sep 28 15:46:43 graviton md: raid0 personality registered for level 0 Sep 28 15:46:43 graviton md: raid1 personality registered for level 1 Sep 28 15:46:43 graviton raid6: int64x1 1906 MB/s Sep 28 15:46:43 graviton raid6: int64x2 2507 MB/s Sep 28 15:46:43 graviton raid6: int64x4 2207 MB/s Sep 28 15:46:43 graviton raid6: int64x8 1699 MB/s Sep 28 15:46:43 graviton raid6: sse2x1 2769 MB/s Sep 28 15:46:43 graviton raid6: sse2x2 3554 MB/s Sep 28 15:46:43 graviton raid6: sse2x4 3726 MB/s Sep 28 15:46:43 graviton raid6: using algorithm sse2x4 (3726 MB/s) Sep 28 15:46:43 graviton md: raid6 personality registered for level 6 Sep 28 15:46:43 graviton md: raid5 personality registered for level 5 Sep 28 15:46:43 graviton md: raid4 personality registered for level 4 Sep 28 15:46:43 graviton md: multipath personality registered for level -4 Sep 28 15:46:43 graviton device-mapper: uevent: version 1.0.3 Sep 28 15:46:43 graviton device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com Sep 28 15:46:43 graviton cpuidle: using governor ladder Sep 28 15:46:43 graviton cpuidle: using governor menu Sep 28 15:46:43 graviton drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed Sep 28 15:46:43 graviton usbhid: timeout initializing reports Sep 28 15:46:43 graviton HID device claimed by neither input, hiddev nor hidraw Sep 28 15:46:43 graviton input: HID 04d9:0499 as /class/input/input3 Sep 28 15:46:43 graviton input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:13.0-2 Sep 28 15:46:43 graviton usbcore: registered new interface driver usbhid Sep 28 15:46:43 graviton usbhid: v2.6:USB HID core driver Sep 28 15:46:43 graviton Advanced Linux Sound Architecture Driver Version 1.0.17. Sep 28 15:46:43 graviton HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 28 15:46:43 graviton ALSA device list: Sep 28 15:46:43 graviton #0: HDA ATI SB at 0xfe024000 irq 16 Sep 28 15:46:43 graviton ip_tables: (C) 2000-2006 Netfilter Core Team Sep 28 15:46:43 graviton TCP cubic registered Sep 28 15:46:43 graviton NET: Registered protocol family 17 Sep 28 15:46:43 graviton RPC: Registered udp transport module. Sep 28 15:46:43 graviton RPC: Registered tcp transport module. Sep 28 15:46:43 graviton Installing 9P2000 support Sep 28 15:46:43 graviton powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) Sep 28 15:46:43 graviton powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe Sep 28 15:46:43 graviton powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 Sep 28 15:46:43 graviton powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 Sep 28 15:46:43 graviton md: Autodetecting RAID arrays. Sep 28 15:46:43 graviton md: Scanned 15 and added 15 devices. Sep 28 15:46:43 graviton md: autorun ... Sep 28 15:46:43 graviton md: considering sdc9 ... Sep 28 15:46:43 graviton md: adding sdc9 ... Sep 28 15:46:43 graviton md: sdc8 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdc7 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdc6 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdc1 has different UUID to sdc9 Sep 28 15:46:43 graviton md: adding sdb9 ... Sep 28 15:46:43 graviton md: sdb8 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdb7 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdb6 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sdb1 has different UUID to sdc9 Sep 28 15:46:43 graviton md: adding sda9 ... Sep 28 15:46:43 graviton md: sda8 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sda7 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sda6 has different UUID to sdc9 Sep 28 15:46:43 graviton md: sda1 has different UUID to sdc9 Sep 28 15:46:43 graviton md: created md4 Sep 28 15:46:43 graviton md: bind<sda9> Sep 28 15:46:43 graviton md: bind<sdb9> Sep 28 15:46:43 graviton md: bind<sdc9> Sep 28 15:46:43 graviton md: running: <sdc9><sdb9><sda9> Sep 28 15:46:43 graviton raid5: device sdc9 operational as raid disk 0 Sep 28 15:46:43 graviton raid5: device sdb9 operational as raid disk 1 Sep 28 15:46:43 graviton raid5: device sda9 operational as raid disk 2 Sep 28 15:46:43 graviton raid5: allocated 4268kB for md4 Sep 28 15:46:43 graviton raid5: raid level 5 set md4 active with 3 out of 4 devices, algorithm 2 Sep 28 15:46:43 graviton RAID5 conf printout: Sep 28 15:46:43 graviton --- rd:4 wd:3 Sep 28 15:46:43 graviton disk 0, o:1, dev:sdc9 Sep 28 15:46:43 graviton disk 1, o:1, dev:sdb9 Sep 28 15:46:43 graviton disk 2, o:1, dev:sda9 Sep 28 15:46:43 graviton md: considering sdc8 ... Sep 28 15:46:43 graviton md: adding sdc8 ... Sep 28 15:46:43 graviton md: sdc7 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sdc6 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sdc1 has different UUID to sdc8 Sep 28 15:46:43 graviton md: adding sdb8 ... Sep 28 15:46:43 graviton md: sdb7 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sdb6 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sdb1 has different UUID to sdc8 Sep 28 15:46:43 graviton md: adding sda8 ... Sep 28 15:46:43 graviton md: sda7 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sda6 has different UUID to sdc8 Sep 28 15:46:43 graviton md: sda1 has different UUID to sdc8 Sep 28 15:46:43 graviton md: created md3 Sep 28 15:46:43 graviton md: bind<sda8> Sep 28 15:46:43 graviton md: bind<sdb8> Sep 28 15:46:43 graviton md: bind<sdc8> Sep 28 15:46:43 graviton md: running: <sdc8><sdb8><sda8> Sep 28 15:46:43 graviton raid5: device sdc8 operational as raid disk 0 Sep 28 15:46:43 graviton raid5: device sdb8 operational as raid disk 1 Sep 28 15:46:43 graviton raid5: device sda8 operational as raid disk 2 Sep 28 15:46:43 graviton raid5: allocated 4268kB for md3 Sep 28 15:46:43 graviton raid5: raid level 5 set md3 active with 3 out of 4 devices, algorithm 2 Sep 28 15:46:43 graviton RAID5 conf printout: Sep 28 15:46:43 graviton --- rd:4 wd:3 Sep 28 15:46:43 graviton disk 0, o:1, dev:sdc8 Sep 28 15:46:43 graviton disk 1, o:1, dev:sdb8 Sep 28 15:46:43 graviton disk 2, o:1, dev:sda8 Sep 28 15:46:43 graviton md: considering sdc7 ... Sep 28 15:46:43 graviton md: adding sdc7 ... Sep 28 15:46:43 graviton md: sdc6 has different UUID to sdc7 Sep 28 15:46:43 graviton md: sdc1 has different UUID to sdc7 Sep 28 15:46:43 graviton md: adding sdb7 ... Sep 28 15:46:43 graviton md: sdb6 has different UUID to sdc7 Sep 28 15:46:43 graviton md: sdb1 has different UUID to sdc7 Sep 28 15:46:43 graviton md: adding sda7 ... Sep 28 15:46:43 graviton md: sda6 has different UUID to sdc7 Sep 28 15:46:43 graviton md: sda1 has different UUID to sdc7 Sep 28 15:46:43 graviton md: created md2 Sep 28 15:46:43 graviton md: bind<sda7> Sep 28 15:46:43 graviton md: bind<sdb7> Sep 28 15:46:43 graviton md: bind<sdc7> Sep 28 15:46:43 graviton md: running: <sdc7><sdb7><sda7> Sep 28 15:46:43 graviton md2: setting max_sectors to 128, segment boundary to 32767 Sep 28 15:46:43 graviton raid0: looking at sdc7 Sep 28 15:46:43 graviton raid0: comparing sdc7(2939776) with sdc7(2939776) Sep 28 15:46:43 graviton raid0: END Sep 28 15:46:43 graviton raid0: ==> UNIQUE Sep 28 15:46:43 graviton raid0: 1 zones Sep 28 15:46:43 graviton raid0: looking at sdb7 Sep 28 15:46:43 graviton raid0: comparing sdb7(2939776) with sdc7(2939776) Sep 28 15:46:43 graviton raid0: EQUAL Sep 28 15:46:43 graviton raid0: looking at sda7 Sep 28 15:46:43 graviton raid0: comparing sda7(2939776) with sdc7(2939776) Sep 28 15:46:43 graviton raid0: EQUAL Sep 28 15:46:43 graviton raid0: FINAL 1 zones Sep 28 15:46:43 graviton raid0: too few disks (3 of 4) - aborting! Sep 28 15:46:43 graviton md: pers->run() failed ... Sep 28 15:46:43 graviton md: do_md_run() returned -12 Sep 28 15:46:43 graviton md: md2 stopped. Sep 28 15:46:43 graviton md: unbind<sdc7> Sep 28 15:46:43 graviton md: export_rdev(sdc7) Sep 28 15:46:43 graviton md: unbind<sdb7> Sep 28 15:46:43 graviton md: export_rdev(sdb7) Sep 28 15:46:43 graviton md: unbind<sda7> Sep 28 15:46:43 graviton md: export_rdev(sda7) Sep 28 15:46:43 graviton md: considering sdc6 ... Sep 28 15:46:43 graviton md: adding sdc6 ... Sep 28 15:46:43 graviton md: sdc1 has different UUID to sdc6 Sep 28 15:46:43 graviton md: adding sdb6 ... Sep 28 15:46:43 graviton md: sdb1 has different UUID to sdc6 Sep 28 15:46:43 graviton md: adding sda6 ... Sep 28 15:46:43 graviton md: sda1 has different UUID to sdc6 Sep 28 15:46:43 graviton md: created md1 Sep 28 15:46:43 graviton md: bind<sda6> Sep 28 15:46:43 graviton md: bind<sdb6> Sep 28 15:46:43 graviton md: bind<sdc6> Sep 28 15:46:43 graviton md: running: <sdc6><sdb6><sda6> Sep 28 15:46:43 graviton raid5: device sdc6 operational as raid disk 0 Sep 28 15:46:43 graviton raid5: device sdb6 operational as raid disk 1 Sep 28 15:46:43 graviton raid5: device sda6 operational as raid disk 2 Sep 28 15:46:43 graviton raid5: allocated 4268kB for md1 Sep 28 15:46:43 graviton raid5: raid level 5 set md1 active with 3 out of 4 devices, algorithm 2 Sep 28 15:46:43 graviton RAID5 conf printout: Sep 28 15:46:43 graviton --- rd:4 wd:3 Sep 28 15:46:43 graviton disk 0, o:1, dev:sdc6 Sep 28 15:46:43 graviton disk 1, o:1, dev:sdb6 Sep 28 15:46:43 graviton disk 2, o:1, dev:sda6 Sep 28 15:46:43 graviton md: considering sdc1 ... Sep 28 15:46:43 graviton md: adding sdc1 ... Sep 28 15:46:43 graviton md: adding sdb1 ... Sep 28 15:46:43 graviton md: adding sda1 ... Sep 28 15:46:43 graviton md: created md0 Sep 28 15:46:43 graviton md: bind<sda1> Sep 28 15:46:43 graviton md: bind<sdb1> Sep 28 15:46:43 graviton md: bind<sdc1> Sep 28 15:46:43 graviton md: running: <sdc1><sdb1><sda1> Sep 28 15:46:43 graviton raid1: raid set md0 active with 3 out of 4 mirrors Sep 28 15:46:43 graviton md: ... autorun DONE. Sep 28 15:46:43 graviton EXT3-fs: mounted filesystem with writeback data mode. Sep 28 15:46:43 graviton VFS: Mounted root (ext3 filesystem) readonly. Sep 28 15:46:43 graviton Freeing unused kernel memory: 324k freed Sep 28 15:46:43 graviton kjournald starting. Commit interval 5 seconds Sep 28 15:46:43 graviton Clocksource tsc unstable (delta = -249179131 ns) Sep 28 15:46:43 graviton EXT3 FS on md1, internal journal Sep 28 15:46:43 graviton kjournald starting. Commit interval 5 seconds Sep 28 15:46:43 graviton EXT3 FS on md3, internal journal Sep 28 15:46:43 graviton EXT3-fs: mounted filesystem with writeback data mode. Sep 28 15:46:43 graviton sky2 eth0: enabling interface Sep 28 15:46:43 graviton Adding 506008k swap on /dev/sda5. Priority:-1 extents:1 across:506008k Sep 28 15:46:43 graviton Adding 506008k swap on /dev/sdb5. Priority:-2 extents:1 across:506008k Sep 28 15:46:43 graviton Adding 506008k swap on /dev/sdc5. Priority:-3 extents:1 across:506008k Sep 28 15:46:43 graviton sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Sep 28 15:46:44 graviton NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Sep 28 15:46:44 graviton NFSD: starting 90-second grace period Sep 28 15:46:47 graviton dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 28 15:46:47 graviton dhcpd: Wrote 0 deleted host decls to leases file. Sep 28 15:46:47 graviton dhcpd: Wrote 0 new dynamic host decls to leases file. Sep 28 15:46:47 graviton dhcpd: Wrote 0 leases to leases file. Sep 28 13:46:42 graviton kdm: :0[2411]: pam_unix(kde-np:session): session opened for user light by (uid=0) Sep 28 13:46:43 graviton sshd[2446]: Server listening on 0.0.0.0 port 22. Sep 28 13:47:46 graviton dhcpd: DHCPDISCOVER from [...] via eth0 Sep 28 13:47:46 graviton dhcpd: DHCPOFFER on 192.168.0.3 to [...] via eth0 Sep 28 13:47:50 graviton dhcpd: DHCPREQUEST for 192.168.0.3 (192.168.0.1) from 00:50:8d:f1:fb:e3 via eth0 Sep 28 13:47:50 graviton dhcpd: DHCPACK on 192.168.0.3 to [...] via eth0 Sep 28 11:47:50 graviton in.tftpd[2618]: RRQ from 192.168.0.3 filename /pxelinux.0 Sep 28 11:47:50 graviton in.tftpd[2618]: tftp: client does not accept options Sep 28 11:47:50 graviton in.tftpd[2619]: RRQ from 192.168.0.3 filename /pxelinux.0 Sep 28 11:47:51 graviton in.tftpd[2620]: RRQ from 192.168.0.3 filename /pxelinux.cfg/01-00-50-8d-f1-fb-e3 Sep 28 11:47:51 graviton in.tftpd[2621]: RRQ from 192.168.0.3 filename //bzImage.tachyon Sep 28 13:48:00 graviton dhcpd: DHCPDISCOVER from [...] via eth0 Sep 28 13:48:00 graviton dhcpd: DHCPOFFER on 192.168.0.3 to [...] via eth0 Sep 28 13:48:00 graviton dhcpd: DHCPREQUEST for 192.168.0.3 (192.168.0.1) from [...] via eth0 Sep 28 13:48:00 graviton dhcpd: DHCPACK on 192.168.0.3 to [...] via eth0 Sep 28 13:48:00 graviton mountd[2237]: authenticated mount request from 192.168.0.3:755 for /diskless/tachyon (/diskless/tachyon) Sep 28 13:50:00 graviton su[2655]: Successful su for root by light Sep 28 13:50:00 graviton su[2655]: + pts/1 light:root Sep 28 13:50:00 graviton su[2655]: pam_unix(su:session): session opened for user root by (uid=1000) Sep 28 13:50:15 graviton /etc/init.d/nfs[2679]: WARNING: nfs has already been started Sep 28 13:50:17 graviton mountd[2237]: Caught signal 15, un-registering and exiting. Sep 28 13:50:17 graviton nfsd: last server has exited, flushing export cache Sep 28 13:50:18 graviton NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Sep 28 13:50:18 graviton NFSD: starting 90-second grace period Sep 28 13:50:39 graviton CIFS VFS: cifs_mount failed w/return code = -22 Sep 28 13:51:05 graviton mountd[2718]: authenticated mount request from 192.168.0.1:785 for /diskless/tachyon (/diskless/tachyon) Sep 28 13:51:36 graviton mountd[2718]: authenticated unmount request from 192.168.0.1:827 for /diskless/tachyon (/diskless/tachyon) Sep 28 13:52:57 graviton dhcpd: DHCPDISCOVER from [...] via eth0 Sep 28 13:52:57 graviton dhcpd: DHCPOFFER on 192.168.0.3 to [...] via eth0 Sep 28 13:53:01 graviton dhcpd: DHCPREQUEST for 192.168.0.3 (192.168.0.1) from [...] via eth0 Sep 28 13:53:01 graviton dhcpd: DHCPACK on 192.168.0.3 to [...] via eth0 Sep 28 11:53:01 graviton in.tftpd[2805]: RRQ from 192.168.0.3 filename /pxelinux.0 Sep 28 11:53:01 graviton in.tftpd[2805]: tftp: client does not accept options Sep 28 11:53:01 graviton in.tftpd[2806]: RRQ from 192.168.0.3 filename /pxelinux.0 Sep 28 11:53:01 graviton in.tftpd[2807]: RRQ from 192.168.0.3 filename /pxelinux.cfg/01-00-50-8d-f1-fb-e3 Sep 28 11:53:01 graviton in.tftpd[2808]: RRQ from 192.168.0.3 filename //bzImage.tachyon Sep 28 13:53:10 graviton dhcpd: DHCPDISCOVER from [...] via eth0 Sep 28 13:53:10 graviton dhcpd: DHCPOFFER on 192.168.0.3 to [...] via eth0 Sep 28 13:53:10 graviton dhcpd: DHCPREQUEST for 192.168.0.3 (192.168.0.1) from [...] via eth0 Sep 28 13:53:10 graviton dhcpd: DHCPACK on 192.168.0.3 to [...] via eth0 Sep 28 13:53:10 graviton mountd[2718]: authenticated mount request from 192.168.0.3:782 for /diskless/tachyon (/diskless/tachyon) Sep 28 13:53:14 graviton mountd[2718]: authenticated mount request from 192.168.0.3:687 for /diskless/tachyon (/diskless/tachyon) Sep 28 13:53:35 graviton mountd[2718]: authenticated mount request from 192.168.0.3:698 for /mnt/raid5 (/mnt/raid5) Sep 28 13:53:35 graviton mountd[2718]: authenticated mount request from 192.168.0.3:700 for /home/light (/home/light) Sep 28 13:53:35 graviton mountd[2718]: authenticated mount request from 192.168.0.3:701 for /var1/portage (/var1/portage) Sep 28 13:53:35 graviton mountd[2718]: authenticated mount request from 192.168.0.3:702 for /var1/lportage (/var1/lportage) Sep 28 13:53:35 graviton mountd[2718]: authenticated mount request from 192.168.0.3:703 for /var1/overlays (/var1/overlays) Sep 28 12:13:34 graviton -- MARK -- Sep 28 12:33:34 graviton -- MARK -- Sep 28 14:36:15 graviton BUG: scheduling while atomic: swapper/0/0x00000102 Sep 28 14:36:15 graviton Modules linked in: Sep 28 14:36:15 graviton CPU 0: Sep 28 14:36:15 graviton Modules linked in: Sep 28 14:36:15 graviton Pid: 0, comm: swapper Not tainted 2.6.27-rc7 #1 Sep 28 14:36:15 graviton RIP: 0010:[<ffffffff8022ccba>] [<ffffffff8022ccba>] default_idle+0x3a/0x40 Sep 28 14:36:15 graviton RSP: 0018:ffffffff807f9f70 EFLAGS: 00000246 Sep 28 14:36:15 graviton RAX: ffffffff807f9fd8 RBX: ffffffff8082f3e0 RCX: 0000000000000000 Sep 28 14:36:15 graviton RDX: ffffffff8084eb20 RSI: 0000000000000092 RDI: ffffffff8088a120 Sep 28 14:36:15 graviton RBP: ffffffff80852700 R08: 0000000000000000 R09: 0000000100294985 Sep 28 14:36:15 graviton R10: 00000000ffffffff R11: ffffffff80237d80 R12: ffffffff8025eeb7 Sep 28 14:36:15 graviton R13: 000002bbd7672100 R14: ffffffff802749bd R15: 0000000000000092 Sep 28 14:36:15 graviton FS: 00007ffe25b04760(0000) GS:ffffffff807f1280(0000) knlGS:0000000000000000 Sep 28 14:36:15 graviton CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Sep 28 14:36:15 graviton CR2: 0000000000000000 CR3: 00000000728b9000 CR4: 00000000000006e0 Sep 28 14:36:15 graviton DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Sep 28 14:36:15 graviton DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Sep 28 14:36:15 graviton Sep 28 14:36:15 graviton Call Trace: Sep 28 14:36:15 graviton [<ffffffff8022cd58>] ? c1e_idle+0x98/0xe0 Sep 28 14:36:15 graviton [<ffffffff80222b9e>] ? cpu_idle+0x5e/0xf0 Sep 28 14:36:15 graviton -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V Download attachment ".config.bz2" of type "application/x-bzip2" (8999 bytes) Download attachment "signature.asc " of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists