| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1223075657.15764.178.camel@haakon2.linux-iscsi.org>
Date: Fri, 03 Oct 2008 16:14:17 -0700
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: linux-iscsi-target-dev@...glegroups.com
Cc: Vladislav Bolkhovitin <vst@...b.net>,
FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Mike Christie <michaelc@...wisc.edu>,
linux-scsi <linux-scsi@...r.kernel.org>,
iet-dev <iscsitarget-devel@...ts.sourceforge.net>,
Greg KH <greg@...ah.com>,
Jerome Martin <tramjoe.merin@...il.com>,
LKML <linux-kernel@...r.kernel.org>,
James Bottomley <James.Bottomley@...senPartnership.com>,
SCST-Devel <scst-devel@...ts.sourceforge.net>,
Joel Becker <joel.becker@...cle.com>,
"H. Peter Anvin" <hpa@...or.com>
Subject: Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI
Target Stack on v2.6.27-rc7
On Thu, 2008-10-02 at 14:29 -0700, Nicholas A. Bellinger wrote:
> On Thu, 2008-10-02 at 21:00 +0400, Vladislav Bolkhovitin wrote:
> > Nicholas A. Bellinger wrote:
> > >>> # Add some more HBA and storage Objects
> > >>> target:~# mkdir -p $TARGET/fileio_0/file_object
> > >>> target:~# mkdir -p $TARGET/rd_mcp_0/ramdisk0
> > >>> target:~# mkdir -p $TARGET/rd_dr_0/ramdisk0
> > >>>
> > >>> target:~# mkdir -p $TARGET/pscsi_0/sdd
> > >>> target:~# echo scsi_channel_id=0,scsi_target_id=3,scsi_lun_id=0 > $TARGET/pscsi_0/sdd/dev_control
> > >>> target:~# echo 1 > $TARGET/pscsi_0/sdd/dev_enable
> > >>>
> > >>> # Now, create LUN 1 and another Port Symlink to a new device on the same $IQN/tpgt_1
> > >>> mkdir -p "$FABRIC/$DEF_IQN/tpgt_1/lun/lun_1"
> > >>> # Create the iSCSI Target Port Mapping for $DEF_IN/tpgt_1 LUN 1
> > >>> # to lvm_test0 and give it the port symbolic name of lio_east_port
> > >>> ln -s $TARGET/pscsi_0/sdd/ "$FABRIC/$DEF_IQN/tpgt_1/lun/lun_1/lio_east_port"
> > >>>
> > >>> target:~# tree $CONFIGFS
> > >>> /sys/kernel/config/
> > >>> `-- target
> > >>> |-- core
> > >>> | |-- fileio_0
> > >>> | | |-- file_object
> > >>> | | | |-- dev_control
> > >>> | | | |-- dev_enable
> > >>> | | | `-- dev_info
> > >>> | | `-- hba_info
> > >>> | |-- iblock_0
> > >>> | | |-- hba_info
> > >>> | | `-- lvm_test0
> > >>> | | |-- dev_control
> > >>> | | |-- dev_enable
> > >>> | | `-- dev_info
> > >>> | |-- pscsi_0
> > >>> | | |-- hba_info
> > >>> | | `-- sdd
> > >>> | | |-- dev_control
> > >>> | | |-- dev_enable
> > >>> | | `-- dev_info
> > >>> | |-- rd_dr_0
> > >>> | | |-- hba_info
> > >>> | | `-- ramdisk0
> > >>> | | |-- dev_control
> > >>> | | |-- dev_enable
> > >>> | | `-- dev_info
> > >>> | `-- rd_mcp_0
> > >>> | |-- hba_info
> > >>> | `-- ramdisk0
> > >>> | |-- dev_control
> > >>> | |-- dev_enable
> > >>> | `-- dev_info
> > >>> |-- iscsi
> > >>> | |-- iqn.2003-01.org.linux-iscsi.target.i686:sn.e475ed6fcdd0
> > >>> | | `-- tpgt_1
> > >>> | | |-- lun
> > >>> | | | |-- lun_0
> > >>> | | | | |-- lio_west_port -> ../../../../../../target/core/iblock_0/lvm_test0
> > >>> | | | | |-- port_control
> > >>> | | | | `-- port_info
> > >>> | | | `-- lun_1
> > >>> | | | |-- lio_east_port -> ../../../../../../target/core/pscsi_0/sdd
> > >>> | | | |-- port_control
> > >>> | | | `-- port_info
> > >>> | | |-- np
> > >>> | | | `-- 172.16.201.137:3260
> > >>> | | | `-- portal_info
> > >>> | | |-- tpg_control
> > >>> | | `-- tpg_enable
> > >>> | `-- lio_version
> > >>> `-- version
> > >>>
> > >>> 22 directories, 29 files
> > >> It's good, I like it. The only thing concerns me that, considering how
> > >> much time *I* spent to understand it, for an average user understanding
> > >> it can be an unbearable nightmare ;)
> > >>
> > >
> > > Well, the idea is not necessarily making the configfs interface the
> > > easiest to use in the world by user directly through $CONFIGFS, but to
> > > make the CLI scripts that speak $CONFIGFS/target CLI, and of course the
> > > actual UIs for user that interact with generic target core and
> > > $FABRIC_MODs be as simple and elegent as possible.
> > >
> > > That is what I believe the balance that a configfs enabled generic
> > > target core provides to both the $CONFIGFS/target API and to $FABRIC_MOD
> > > maintainers looking to port their code to use a generic control
> > > infrastructure. :-)
> > >
> > >> In a few days I'll write a proposed configfs hierarchy for existing SCST
> > >> /proc interface.
> > >
> > > Sounds good! Please let me know if you have questions.
> >
> > There's one unsolved problem. As I've already written, SCST core needs
> > an ability to provide to user space a large amount of data, which may
> > not fit to a single page.
> >
> > A list of connected initiators ("sessions"
> > file in /proc), for instance. Each initiator in that list has a number
> > of attributes: initiator name, target template name, count of
> > outstanding commands, etc. The logical way for that would be to create a
> > subdirectory for each initiator, like:
> >
> > /sys/kernel/config/
> > `-- target
> > `-- sessions
> > `-- session1
> > | |-- initiator_name
> > | |-- template_name
> > | `-- commands
> > |
> > `-- session2
> > |-- initiator_name
> > `-- template_name
> > `-- commands
> >
>
> The the Initiator Port ACLs need to go
> under /sys/kernel/config/target/$FABRIC because the struct fabric_acl *
> will always contain fabric dependent config items. For example, Since
> these struct fabric_acl_t do *NOT* symlink directly back to
> target_core_mod under /sys/kernel/config/target/core/$HBA/$DEV, but to
> fabric_lun_t (iscsi_lun_t in my case) to Symlink to
> a /sys/kernel/config/target/core/$HBA/$DEV that has been registered with
> the generic target configfs infrastructure.
>
> Here is what I am thinking wrt /sys/kernel/config/target/iscsi and iSCSI
> Initiator Node ACLs to iSCSI Portal Groups and iSCSI LUNs attached to
> those Portal Groups. There are two cases:
>
> *) The production case with with user creating those ACLs under $FABRIC
> (which is what I will focus on now).
>
> * And "Demo Mode" case where any Initiator logging into
> $FABRIC/$ENDPOINT/$PORTAL can have access to all
> $FABRIC/$ENDPOINT/lun/lun_*/*my_ports*
>
> The production ACL case would look like:
>
> export CONFIGFS=/sys/kernel/config/
> export TARGET=/sys/kernel/config/target/core/
> export FABRIC=/sys/kernel/config/target/iscsi/
>
> TARGET_IQN=iqn.2003-01.org.linux-iscsi.ps3-cell.ppc64:sn.f8f651bd5fec
> INITIATOR_IQN=iqn.1993-08.org.debian:01.f82074ca555f
>
> <Setup $STORAGE_OBJECTs under $TARGET>
>
> # Create the LIO-target endpoint
> mkdir -p "$FABRIC/$TARGET_IQN/tpgt_1/np/172.16.201.137:3260"
> mkdir -p "$FABRIC/$TARGET_IQN/tpgt_1/lun/lun_0"
>
> <Setup Port Symlinks from $TARGET to $TARGET_IQN/tpgt_1/lun/lun_0>
>
> # Create the Initiator ACL under $TARGET_IQN/tpgt_1
> mkdir -p $"FABRIC/$TARGET_IQN/tpgt_1/initiators/$INITIATOR_IQN"
> # Allow $INITIATOR_IQN access to tpgt_1/lun/lun_0/
> ln -s "$FABRIC/$TARGET_IQN/tpgt_1/lun/lun_0" \
> "$FABRIC/$TARGET_IQN/tpgt_1/initiators/$INITIATOR_IQN/lun_0"
>
> >From there, you don't have to worry about PAGE_SIZE limitiations w/o, I
> can simply use use:
>
> cat $FABRIC/iqn*/tpgt*/initiators/*/session
>
> to see which acl'ed iSCSI Initiators are logged in on all iSCSI Target
> Ports.
>
> Also I should add that I am currently using /proc/scsi_target/mib
> and /proc/iscsi_target_mib for READ-ONLY data with target_core_mod.ko
> and iscsi_target_mod.ko respectively. For the other "Demo Mode" case
> mentioned above, I am currently using /proc/iscsi_target/mib/sess_attr
> to see the active sessions for LIO-Target.
>
> I will be implementing this model over the next days.. I will post the
> commit once its up and you can have a look..
>
Ok, here is the commit diff for adding Initiator ACLS to
iscsi/$IQN/$TPGT/ under the acls/ subdirectory (instead of "initiators"
in the example above).
http://git.kernel.org/?p=linux/kernel/git/nab/lio-core-2.6.git;a=commitdiff;h=0a451affbe236b5538e5de06242372715e3ac52c;hp=374e8ace84ca58490be22d881f017d48c6742b50
Other than the name change, everything is functioning in the commit as
described in the example above. I am able to successfully mkdir(2) and
rmdir(2) iscsi/$IQN/$TPGT/acls/$INITIATOR_IQN, as well as create the
SymLinks from iscsi/$IQN/$TPGT/lun/lun_* to
iscsi/$IQN/$TPGT/acls/$INITIATOR_IQN/lun_* to create the Initiator TPGT
LUN Mappings.
There are a couple of remaining items that I am still working on WRT the
Initiator ACL code. One is that the CmdSN Queue Depth for the Initiator
is hardcoded. This needs to be a configfs attribute under
iscsi/$IQN/$TPGT/acls/$INITIATOR_NAME/, and then enabled with a
attribute under the same $INITIATOR_NAME directory. Another is
assigning READ-ONLY (its hardcoded to R/W for now) access to one of the
initiator's TPG LUN mappings. I was thinking name in the TPG LUN
Symlink destination name, we could include "lun_0:RO" in order to make
this Initiator's LUN be READ-ONLY.
Anyways, this are pretty minor and I should be commiting the remaining
pieces over the weekend.
--nab
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists