| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 7 Oct 2008 03:03:09 +0300
From: Felipe Balbi <me@...ipebalbi.com>
To: Carlos Chinea <carlos.chinea@...ia.com>
Cc: linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org
Subject: Re: [RFC][PATCH 3/5] OMAP SSI driver code
On Fri, Oct 03, 2008 at 02:52:28PM +0300, Carlos Chinea wrote:
Description. This seems to repeat in all your patches, take a look at
linux kernel patch format: http://linux.yyz.us/patch-format.html
> Signed-off-by: Carlos Chinea <carlos.chinea@...ia.com>
> ---
> drivers/misc/ssi/Kconfig | 11 +
> drivers/misc/ssi/Makefile | 7 +
> drivers/misc/ssi/ssi_driver.c | 513 +++++++++++++++++++++++++++++++++++++
> drivers/misc/ssi/ssi_driver.h | 211 +++++++++++++++
> drivers/misc/ssi/ssi_driver_bus.c | 192 ++++++++++++++
> drivers/misc/ssi/ssi_driver_dma.c | 406 +++++++++++++++++++++++++++++
> drivers/misc/ssi/ssi_driver_if.c | 335 ++++++++++++++++++++++++
> drivers/misc/ssi/ssi_driver_int.c | 232 +++++++++++++++++
> 8 files changed, 1907 insertions(+), 0 deletions(-)
> create mode 100644 drivers/misc/ssi/Kconfig
> create mode 100644 drivers/misc/ssi/Makefile
> create mode 100644 drivers/misc/ssi/ssi_driver.c
> create mode 100644 drivers/misc/ssi/ssi_driver.h
> create mode 100644 drivers/misc/ssi/ssi_driver_bus.c
> create mode 100644 drivers/misc/ssi/ssi_driver_dma.c
> create mode 100644 drivers/misc/ssi/ssi_driver_if.c
> create mode 100644 drivers/misc/ssi/ssi_driver_int.c
>
> diff --git a/drivers/misc/ssi/Kconfig b/drivers/misc/ssi/Kconfig
> new file mode 100644
> index 0000000..5e0842c
> --- /dev/null
> +++ b/drivers/misc/ssi/Kconfig
> @@ -0,0 +1,11 @@
> +#
> +# OMAP SSI HW kernel configuration
> +#
> +config OMAP_SSI
> + tristate "OMAP SSI hardware driver"
> + depends on ARCH_OMAP
> + default n
> + ---help---
> + If you say Y here, you will enable the OMAP SSI hardware driver.
> +
> + If unsure, say N.
> diff --git a/drivers/misc/ssi/Makefile b/drivers/misc/ssi/Makefile
> new file mode 100644
> index 0000000..2b74e02
> --- /dev/null
> +++ b/drivers/misc/ssi/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Makefile for SSI drivers
> +#
> +omap_ssi-objs := ssi_driver.o ssi_driver_dma.o ssi_driver_int.o \
^ trailing whitespace
> + ssi_driver_if.o ssi_driver_bus.o
> +
> +obj-$(CONFIG_OMAP_SSI) += omap_ssi.o
> diff --git a/drivers/misc/ssi/ssi_driver.c b/drivers/misc/ssi/ssi_driver.c
> new file mode 100644
> index 0000000..292e868
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver.c
> @@ -0,0 +1,513 @@
> +/*
> + * ssi_driver.c
> + *
> + * Implements SSI module interface, initialization, and PM related functions.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/err.h>
> +#include "ssi_driver.h"
> +
> +static void ssi_dev_release(struct device *dev)
> +{
> +}
> +
> +static void __init ssi_undo_reg_dev(struct platform_device *pd,
> + int p, int ch)
Take a few tabs out of the second line, it'll look better.
> +{
> + struct ssi_platform_data *p_data =
normally we call it pdata, but it's your call in this case
> + (struct ssi_platform_data *) pd->dev.platform_data;
unnecessary cast. Remove
> + struct ssi_port *ssi_p;
> + int port;
> + int channel;
> +
> + for (port = p; port >= 0; port--) {
> + ssi_p = &p_data->ssi_ctrl->ssi_port[port];
> + for (channel = ch; channel >= 0 ; channel--)
> + device_unregister(&ssi_p->ssi_channel[channel].dev
> + ->device);
This function should be unnecessary. pdata usage is wrong.
> + }
> +}
> +
> +static int __init reg_ssi_dev_ch(struct platform_device *pd,
> + unsigned int p, unsigned int ch)
the following should be probe().
> +{
> + struct ssi_device *dev;
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
unnecessary cast, remove.
> +
> + dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> + dev->n_ctrl = pd->id;
> + dev->n_p = p;
> + dev->n_ch = ch;
> + dev->ch = &p_data->ssi_ctrl->ssi_port[p].ssi_channel[ch];
> + p_data->ssi_ctrl->ssi_port[p].ssi_channel[ch].dev = dev;
pdata usage is wrong. It should be used to initialize a few fields in
the device structure and then vanish.
> + dev->device.bus = &ssi_bus_type;
> + dev->device.parent = &pd->dev;
> + dev->device.release = ssi_dev_release;
> + if (dev->n_ctrl < 0)
> + snprintf(dev->device.bus_id, sizeof(dev->device.bus_id),
> + "omap_ssi-p%u.c%u", p, ch);
> + else
> + snprintf(dev->device.bus_id, sizeof(dev->device.bus_id),
> + "omap_ssi%d-p%u.c%u", dev->n_ctrl, p, ch);
> +
> + return device_register(&dev->device);
> +}
> +
> +static int __init register_ssi_devices(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
unnecessary cast. Remove
> + unsigned int n_ch = 0;
> + int port;
> + int ch = 0;
> + int err = 0;
> +
> + for (port = 0; ((port < p_data->num_ports) && (err >= 0)); port++) {
> + n_ch = max(p_data->ports[port].tx_ch,
> + p_data->ports[port].rx_ch);
> + for (ch = 0; ((ch < n_ch) && (err >= 0)); ch++)
> + err = reg_ssi_dev_ch(pd, port, ch);
> + }
> +
> + if (err < 0) {
> + port--;
> + ch--;
> + dev_err(&pd->dev, "Error registering ssi device channel "
> + "p%d-c%d : %d\n", port, ch, err);
> + if ((port == 0) && (ch == 0))
> + return err;
> + else if ((port > 0) && (ch == 0))
> + ch = n_ch;
> + ssi_undo_reg_dev(pd, port, ch);
> + }
> + return err;
> +}
> +
> +static int __init ssi_softreset(struct ssi_dev *ssi_ctrl)
> +{
> + int ind = 0;
> + void __iomem *base = ssi_ctrl->base;
> + u32 status;
> +
> + ssi_outl_or(SSI_SOFTRESET, base, SSI_SYS_SYSCONFIG_REG);
> +
> + status = ssi_inl(base, SSI_SYS_SYSSTATUS_REG);
> + while ((!(status & SSI_RESETDONE)) && (ind < SSI_RESETDONE_RETRIES)) {
> + set_current_state(TASK_UNINTERRUPTIBLE);
> + schedule_timeout(msecs_to_jiffies(SSI_RESETDONE_TIMEOUT));
> + status = ssi_inl(base, SSI_SYS_SYSSTATUS_REG);
> + ind++;
> + }
> +
> + if (ind >= SSI_RESETDONE_RETRIES)
> + return -EIO;
> +
> + /* Reseting GDD */
> + ssi_outl_or(SSI_SWRESET, base, SSI_GDD_GRST_REG);
> +
> + return 0;
> +}
> +
> +static void __init set_ssi_ports_default(
> + struct platform_device *pd)
> +{
> + struct ssi_port_pd *cfg = NULL;
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
> + unsigned int port = 0;
> + void __iomem *base = p_data->ssi_ctrl->base;
is this really a virtual address?? then can you use
__raw_{read,write}[blw]() and drop ssi-specific read/write functions?
btw, the base address shouldn't come via pdata, it should come via
struct resource and get ioremap:ed in the driver. Recently we fixed all
the physical/virtual address mess and if we accept this it'll lead to
similar issues. Please fix.
> +
> + for (port = 1; port <= p_data->num_ports; port++) {
> + cfg = &p_data->ports[port - 1];
> + ssi_outl(cfg->tx_mode, base, SSI_SST_MODE_REG(port));
> + ssi_outl(cfg->tx_frame_size, base, SSI_SST_FRAMESIZE_REG(port));
> + ssi_outl(cfg->divisor, base, SSI_SST_DIVISOR_REG(port));
> + ssi_outl(cfg->tx_ch, base, SSI_SST_CHANNELS_REG(port));
> + ssi_outl(cfg->arb_mode, base, SSI_SST_ARBMODE_REG(port));
> +
> + ssi_outl(cfg->rx_mode, base, SSI_SSR_MODE_REG(port));
> + ssi_outl(cfg->rx_frame_size, base, SSI_SSR_FRAMESIZE_REG(port));
> + ssi_outl(cfg->rx_ch, base, SSI_SSR_CHANNELS_REG(port));
> + ssi_outl(cfg->timeout, base, SSI_SSR_TIMEOUT_REG(port));
> + }
> +}
> +
> +static int __init ssi_port_channels_init(
> + struct platform_device *pd, unsigned int lport)
> +{
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
> + struct ssi_channel *ch;
> + struct ssi_port *port;
> + unsigned int n_ch;
> + unsigned int ch_i;
> +
> + n_ch = max(p_data->ports[lport].tx_ch, p_data->ports[lport].rx_ch);
> + port = &p_data->ssi_ctrl->ssi_port[lport];
> + for (ch_i = 0; ch_i < n_ch; ch_i++) {
> + ch = &port->ssi_channel[ch_i];
> + ch->channel_number = ch_i;
> + ch->flags = 0;
> + ch->ssi_port = port;
> + ch->read_data.addr = NULL;
> + ch->read_data.size = 0;
> + ch->read_data.lch = -1;
> + ch->write_data.addr = NULL;
> + ch->write_data.size = 0;
> + ch->write_data.lch = -1;
> + spin_lock_init(&ch->ssi_ch_lock);
> + }
> +
> + return 0;
> +}
> +
> +static int __init ssi_ports_init(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
unnecessary cast. Remove
> + struct ssi_port *ssi_p = NULL;
> + unsigned int port = 0;
> + unsigned int err = 0;
> + unsigned int n_ports;
> +
> + n_ports = min(p_data->num_ports, (u8)SSI_MAX_PORTS);
> +
> + for (port = 0; ((port < n_ports) && (err >= 0)); port++) {
> + ssi_p = &p_data->ssi_ctrl->ssi_port[port];
> + ssi_p->port_number = port + 1;
> + ssi_p->ssi_controller = p_data->ssi_ctrl;
> + ssi_p->max_ch = max(p_data->ports[port].tx_ch,
> + p_data->ports[port].rx_ch);
> + ssi_p->max_ch = min(ssi_p->max_ch, (u8)SSI_PORT_MAX_CH);
> + ssi_p->n_irq = p_data->ports[port].n_irq;
> + ssi_p->irq = 0;
> + spin_lock_init(&ssi_p->lock);
> + err = ssi_port_channels_init(pd, port);
> + }
> +
> + return 0;
> +}
> +
> +static int __init ssi_controller_init(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
> + struct ssi_dev *ssi_ctrl = p_data->ssi_ctrl;
> + int err;
> +
> + ssi_ctrl->id = pd->id;
> + ssi_ctrl->max_p = p_data->num_ports;
in the header file you have a define for the max_ports and here you use
platform_data to initialize it. Quite weird. Where are you using that
define ?
> + ssi_ctrl->pdev = pd;
do not save the entire pdev pointer, save only the dev pointer use
platform_set_drvdata(pdev, ssi_ctrl);
> + spin_lock_init(&ssi_ctrl->lock);
> + ssi_ctrl->ssi_clk = clk_get(&pd->dev, p_data->clk_name);
please don't.
> + if (IS_ERR(ssi_ctrl->ssi_clk)) {
> + dev_err(&pd->dev, "Unable to get SSI clocks");
> + return PTR_ERR(ssi_ctrl->ssi_clk);
> + }
> +
> + err = ssi_ports_init(pd);
> + if (err < 0) {
> + dev_err(&pd->dev, "Error on ssi_controller initialization");
> + clk_put(ssi_ctrl->ssi_clk);
> + return -EBUSY;
> + }
> +
> + return 0;
> +}
> +
> +static void ssi_controller_exit(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
unnecessary cast, remove.
> + struct ssi_dev *ssi_ctrl = p_data->ssi_ctrl;
> +
> + p_data->ssi_ctrl = NULL;
> + ssi_ctrl->pdev = NULL;
> + clk_put(ssi_ctrl->ssi_clk);
> +
unnecessary extra white line, remove.
> +}
> +
> +static int __init request_ssi_irqs(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data = pd->dev.platform_data;
> + struct ssi_dev *ssi_ctrl = p_data->ssi_ctrl;
> + struct ssi_port *ssi_p;
> + struct resource *mpu_irq;
unnecessary if it's only to get the irq.
> + int i;
> + int j;
> + int err = 0;
> +
> + for (i = 0; ((i < p_data->num_ports) && (!err)); i++) {
> + mpu_irq = platform_get_resource(pd, IORESOURCE_IRQ, i*2);
no
> + if (!mpu_irq) {
> + dev_err(&pd->dev, "SSI misses info for MPU IRQ"
> + " on port %d", i + 1);
> + err = -ENODEV;
use a goto to create a nice error path, then you remove this else below.
> + } else {
> + ssi_p = &ssi_ctrl->ssi_port[i];
> + ssi_p->n_irq = 0; /* We only use one irq line */
> + ssi_p->irq = mpu_irq->start;
ssi_p->irq = platform_get_irq(pdev, 0);
also gets rid of the unnecessary mpu_irq.
> + tasklet_init(&ssi_p->ssi_tasklet,
> + do_ssi_tasklet, (unsigned long)ssi_p);
> + err = request_irq(mpu_irq->start, ssi_mpu_handler,
> + IRQF_DISABLED, mpu_irq->name, ssi_p);
> + if (err < 0) {
> + dev_err(&pd->dev, "FAILED request IRQ (%d)",
> + mpu_irq->start);
> + err = -EBUSY;
> + }
> + }
> + }
> +
> + if (err < 0) {
> + /* Let's free the reserved resources if there are any errors */
> + for (j = 0; (j > (i-1)); j++) {
> + printk(KERN_DEBUG LOG_NAME "Free resources on port %d",
> + j+1);
> + ssi_p = &ssi_ctrl->ssi_port[i];
> + tasklet_disable(&ssi_p->ssi_tasklet);
> + free_irq(ssi_p->irq, ssi_p);
> + }
> + }
> +
> + return err;
> +}
> +
> +static int __init request_ssi_gdd_irq(struct platform_device *pd)
> +{
> + struct ssi_platform_data *p_data = pd->dev.platform_data;
> + struct ssi_dev *ssi_ctrl = p_data->ssi_ctrl;
> + struct resource *gdd_irq;
no
> + int err = 0;
> +
> + gdd_irq = platform_get_resource(pd, IORESOURCE_IRQ, 4);
no
> + if (!gdd_irq) {
> + dev_err(&pd->dev, "SSI device has no info about GDD IRQ");
> + return -ENODEV;
> + }
> +
> + ssi_ctrl->gdd_irq = gdd_irq->start;
hell no. Use platform_get_irq() like I said before.
> + err = request_irq(gdd_irq->start, ssi_gdd_mpu_handler,
> + IRQF_DISABLED, gdd_irq->name, ssi_ctrl);
> + if (err < 0) {
> + dev_err(&pd->dev, "FAILED to request IRQ NUMBER (%d)",
> + gdd_irq->start);
> + return -EBUSY;
> + }
> + tasklet_init(&ssi_ctrl->ssi_gdd_tasklet, do_ssi_gdd_tasklet,
> + (unsigned long)ssi_ctrl);
> +
> + return err;
> +}
> +
> +static void free_ssi_irqs(struct ssi_dev *ssi_ctrl)
> +{
> + struct ssi_port *ssi_p;
> + int i;
> +
> + for (i = 0; (i < ssi_ctrl->max_p); i++) {
> + ssi_p = &ssi_ctrl->ssi_port[i];
> + tasklet_disable(&ssi_p->ssi_tasklet);
> + free_irq(ssi_p->irq, ssi_p);
> + }
> +}
> +
> +static void free_ssi_gdd_irq(struct ssi_dev *ssi_ctrl)
> +{
> + tasklet_disable(&ssi_ctrl->ssi_gdd_tasklet);
> + free_irq(ssi_ctrl->gdd_irq, ssi_ctrl);
> +}
> +
> +static int __init ssi_probe(struct platform_device *pd)
> +{
> + struct resource *mem, *ioarea;
> + struct ssi_dev *ssi_ctrl = NULL;
> + struct ssi_platform_data *p_data = NULL;
> + u32 revision = 0;
> + int err = 0;
> +
> +
> + if ((pd == NULL) || (pd->dev.platform_data == NULL)) {
> + pr_err(LOG_NAME "No device/platform_data found on "
> + "ssi device\n");
> + return -ENODEV;
> + }
aff... pd will never be NULL if this driver is probing. I'd rather:
struct ssi_platform_data *pdata = pd->dev.platform_data;
if (!pdata) {
error messages goes here
}
> +
> + ssi_ctrl = kzalloc(sizeof(*ssi_ctrl), GFP_KERNEL);
> + if (ssi_ctrl == NULL) {
> + dev_err(&pd->dev, "Could not allocate memory for"
> + " struct ssi_dev\n");
> + return -ENOMEM;
> + }
> +
> + p_data = (struct ssi_platform_data *) pd->dev.platform_data;
no cast needed.
> + p_data->ssi_ctrl = ssi_ctrl;
hell no. platform_set_drvdata(pd, ssi_ctrl);
> +
> + mem = platform_get_resource(pd, IORESOURCE_MEM, 0);
> + if (!mem) {
> + dev_err(&pd->dev, "SSI device does not have "
> + "SSI IO memory region information\n");
> + err = -ENODEV;
> + goto rback5;
> + }
> +
> + err = ssi_controller_init(pd);
> + if (err < 0) {
> + dev_err(&pd->dev, "Could not initialize ssi controller:"
> + " %d\n", err);
> + goto rback5;
> + }
> +
> + ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
> + pd->dev.bus_id);
> + if (!ioarea) {
> + dev_err(&pd->dev, "Unable to request SSI IO memory "
> + "region\n");
> + err = -EBUSY;
> + goto rollback4;
> + }
> +
> + ssi_ctrl->base = (void __iomem *)mem->start;
afff... this is terrible. Use ioremap();
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> +
> + err = request_ssi_irqs(pd);
> + if (err < 0)
> + goto rollback1;
> +
> + err = request_ssi_gdd_irq(pd);
> + if (err < 0)
> + goto rollback2;
> +
> + err = ssi_softreset(ssi_ctrl);
> + if (err < 0)
> + goto rollback3;
> +
> + /* Set default PM settings */
> + ssi_outl((SSI_AUTOIDLE | SSI_SIDLEMODE_SMART | SSI_MIDLEMODE_SMART),
> + ssi_ctrl->base, SSI_SYS_SYSCONFIG_REG);
> + ssi_outl(SSI_CLK_AUTOGATING_ON, ssi_ctrl->base, SSI_GDD_GCR_REG);
> +
> + set_ssi_ports_default(pd);
> +
> + /* Gather info from registers for the driver.(REVISION) */
> + revision = ssi_inl(ssi_ctrl->base, SSI_SYS_REVISION_REG);
> + dev_info(&pd->dev, "SSI Hardware REVISION %d.%d\n",
> + (revision & SSI_REV_MAJOR) >> 4, (revision & SSI_REV_MINOR));
> +
> + err = register_ssi_devices(pd);
> + if (err < 0)
> + goto rollback3;
> +
> + clk_disable(ssi_ctrl->ssi_clk);
> +
> + return err;
> +
> +rollback3:
> + free_ssi_gdd_irq(ssi_ctrl);
> +rollback2:
> + free_ssi_irqs(ssi_ctrl);
> +rollback1:
add iounmap() here
> + release_mem_region(mem->start, mem->end - mem->start + 1);
> + clk_disable(ssi_ctrl->ssi_clk);
> +rollback4:
> + ssi_controller_exit(pd);
> +rback5:
> + kfree(ssi_ctrl);
> + return err;
> +}
> +
> +static void __exit close_all_ch(struct ssi_dev *ssi_ctrl)
> +{
> + struct ssi_port *ssi_p;
> + unsigned int port;
> + unsigned int ch;
> +
> + for (port = 0; port < ssi_ctrl->max_p; port++) {
> + ssi_p = &ssi_ctrl->ssi_port[port];
> + for (ch = 0; ch < ssi_p->max_ch; ch++)
> + ssi_close(ssi_p->ssi_channel[ch].dev);
> + }
> +}
> +
> +static int __exit ssi_remove(struct platform_device *pd)
> +{
> + struct resource *mem;
> + struct ssi_platform_data *p_data =
> + (struct ssi_platform_data *) pd->dev.platform_data;
> + struct ssi_dev *ssi_ctrl = p_data->ssi_ctrl;
This should ssi_ctrl = platform_get_drvdata(pd);
> +
> + close_all_ch(ssi_ctrl);
> + free_ssi_gdd_irq(ssi_ctrl);
> + free_ssi_irqs(ssi_ctrl);
> + mem = platform_get_resource(pd, IORESOURCE_MEM, 0);
> + if (mem)
> + release_mem_region(mem->start, mem->end - mem->start + 1);
when you add proper ioremap(), add iounmap here.
> + ssi_controller_exit(pd);
> + kfree(ssi_ctrl);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ssi_pdriver = {
> + .probe = ssi_probe,
> + .remove = __exit_p(ssi_remove),
> + .driver = {
> + .name = "omap_ssi",
> + .owner = THIS_MODULE,
> + }
> +};
> +
> +static int __init ssi_driver_init(void)
> +{
> + int err = 0;
> +
> + pr_info("SSI DRIVER Version " SSI_DRIVER_VERSION "\n");
> +
> + ssi_bus_init();
> + err = platform_driver_probe(&ssi_pdriver, ssi_probe);
> + if (err < 0) {
> + pr_err(LOG_NAME "Platform DRIVER register FAILED: %d\n", err);
> + ssi_bus_exit();
> + return err;
> + }
> +
> + return 0;
return platform_driver_register(&ssi_pdriver);
should be enough.
> +}
> +
> +static void __exit ssi_driver_exit(void)
> +{
> + ssi_bus_exit();
> + platform_driver_unregister(&ssi_pdriver);
> +
> + pr_info("SSI DRIVER removed\n");
> +}
> +
> +module_init(ssi_driver_init);
> +module_exit(ssi_driver_exit);
> +
> +MODULE_ALIAS("platform:omap_ssi");
> +MODULE_AUTHOR(SSI_DRIVER_AUTHOR);
> +MODULE_DESCRIPTION(SSI_DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/misc/ssi/ssi_driver.h b/drivers/misc/ssi/ssi_driver.h
> new file mode 100644
> index 0000000..3c6d849
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver.h
> @@ -0,0 +1,211 @@
> +/*
> + * ssi_driver.h
> + *
> + * Header file for the SSI driver low level interface.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#ifndef __SSI_DRIVER_H__
> +#define __SSI_DRIVER_H__
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/clk.h>
> +#include <linux/ioport.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/spinlock.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +
> +#include <mach/ssi/ssi_reg_common.h>
> +#include <mach/ssi/ssi_sys_reg.h>
> +#include <mach/ssi/ssi_ssr_reg.h>
> +#include <mach/ssi/ssi_sst_reg.h>
> +#include <mach/ssi/ssi_gdd_reg.h>
> +
> +#include <linux/ssi_driver_if.h>
> +
> +#define SSI_DRIVER_VERSION "1.1-rc2"
> +#define SSI_DRIVER_AUTHOR "Carlos Chinea / Nokia"
> +#define SSI_DRIVER_DESC "Synchronous Serial Interface Driver"
> +#define SSI_DRIVER_LINCESE "GPL"
> +#define SSI_DRIVER_NAME "ssi_driver"
> +
> +#define SSI_DEVICE_NAME "ssi_device"
these should be in the C-file. Nobody needs to access them
> +
> +/* 10 ms */
> +#define SSI_RESETDONE_TIMEOUT 10
> +/* Let's retry 20 times.=>20x10 ms=200 ms */
> +#define SSI_RESETDONE_RETRIES 20
> +
> +/* Channel states */
> +#define SSI_CH_OPEN 0x01
> +
> +/*
> + * The number of channels to use by the driver in the ports, or the highest
> + * port channel number (+1) used. (MAX:8)
> + */
> +#define SSI_PORT_MAX_CH 4
> +/* Number of logical channel in GDD */
> +#define SSI_NUM_LCH 8
> +
> +#define LOG_NAME "OMAP SSI: "
> +#define SSI_PREFIX "ssi:"
> +
> +/*
> + * Callbacks use by the SSI upper layer (SSI protocol) to receive data
> + * from the port channels.
> + */
> +struct ssi_channel_ops {
> + void (*write_done) (struct ssi_device *dev);
> + void (*read_done) (struct ssi_device *dev);
> +};
> +
> +struct ssi_data {
> + /* Pointer to the data to be sent/received */
> + u32 *addr;
> + /*
> + * Number of words to be sent or space reserved for data to be
> + * received.
> + */
> + unsigned int size;
> + /* Holds GDD logical channed number */
> + int lch;
> +};
> +
> +struct ssi_channel {
> + struct ssi_channel_ops ops;
> + struct ssi_data read_data;
> + struct ssi_data write_data;
> + struct ssi_port *ssi_port;
> + u8 flags;
> + u8 channel_number;
> + spinlock_t ssi_ch_lock;
> + struct ssi_device *dev;
> + void *priv;
> +};
> +
> +/* Holds information related to SSI port */
> +struct ssi_port {
> + struct ssi_channel ssi_channel[SSI_PORT_MAX_CH];
> + struct ssi_dev *ssi_controller;
> + u8 port_number;
> + u8 max_ch;
> + u8 n_irq; /* IRQ0 or IRQ1 */
> + int irq /* Actual IRQ number */;
> + spinlock_t lock;
> + struct tasklet_struct ssi_tasklet;
> +};
> +
> +/*
> + * Struct definition to hold information about the clocks, ssi controller
> + * and the ssi ports.
> + */
> +struct ssi_dev {
> + /* Holds reference to PORT 1 (and PORT2 if defined) */
> + struct ssi_port ssi_port[SSI_MAX_PORTS];
> + int id;
> + u8 flags;
> + u8 max_p;
> + struct clk *ssi_clk;
> + void __iomem *base;
> + spinlock_t lock;
> + int gdd_irq;
> + struct tasklet_struct ssi_gdd_tasklet;
> + struct platform_device *pdev;
> +};
> +
> +/* SSI Bus */
> +struct ssi_port_event {
> + struct ssi_port *ssi_port;
> + unsigned int event;
> + void *priv;
> +};
> +extern struct bus_type ssi_bus_type;
> +
> +int ssi_port_event_handler(struct ssi_port *p, unsigned int event, void *arg);
> +int ssi_bus_init(void);
> +void ssi_bus_exit(void);
> +/* End SSI Bus */
> +
> +int ssi_driver_read_interrupt(struct ssi_channel *ssi_channel, u32 *data);
> +int ssi_driver_write_interrupt(struct ssi_channel *ssi_channel, u32 *data);
> +int ssi_driver_read_dma(struct ssi_channel *ssi_channel, u32 *data,
> + unsigned int count);
> +int ssi_driver_write_dma(struct ssi_channel *ssi_channel, u32 *data,
> + unsigned int count);
> +
> +void ssi_driver_cancel_write_interrupt(struct ssi_channel *ch);
> +void ssi_driver_cancel_read_interrupt(struct ssi_channel *ch);
> +void ssi_driver_cancel_write_dma(struct ssi_channel *ch);
> +void ssi_driver_cancel_read_dma(struct ssi_channel *ch);
> +
> +irqreturn_t ssi_mpu_handler(int irq, void *ssi_port);
> +irqreturn_t ssi_gdd_mpu_handler(int irq, void *ssi_controller);
> +
> +void do_ssi_tasklet(unsigned long ssi_port);
> +void do_ssi_gdd_tasklet(unsigned long device);
> +
> +static inline u32 ssi_inl(void __iomem *base, u32 offset)
> +{
> + return inl(OMAP2_IO_ADDRESS(base + offset));
> +}
> +
> +static inline void ssi_outl(u32 data, void __iomem *base, u32 offset)
> +{
> + outl(data, OMAP2_IO_ADDRESS(base + offset));
> +}
> +
> +static inline void ssi_outl_or(u32 data, void __iomem *base, u32 offset)
> +{
> + u32 tmp = ssi_inl(base, offset);
> + ssi_outl((tmp | data), base, offset);
> +}
> +
> +static inline void ssi_outl_and(u32 data, void __iomem *base, u32 offset)
> +{
> + u32 tmp = ssi_inl(base, offset);
> + ssi_outl((tmp & data), base, offset);
> +}
> +
> +static inline u16 ssi_inw(void __iomem *base, u32 offset)
> +{
> + return inw(OMAP2_IO_ADDRESS(base + offset));
> +}
> +
> +static inline void ssi_outw(u16 data, void __iomem *base, u32 offset)
> +{
> + outw(data, OMAP2_IO_ADDRESS(base + offset));
> +}
> +
> +static inline void ssi_outw_or(u16 data, void __iomem *base, u32 offset)
> +{
> + u16 tmp = ssi_inw(base, offset);
> + ssi_outw((tmp | data), base, offset);
> +}
> +
> +static inline void ssi_outw_and(u16 data, void __iomem *base, u32 offset)
> +{
> + u16 tmp = ssi_inw(base, offset);
> + ssi_outw((tmp & data), base, offset);
> +}
> +#endif
> diff --git a/drivers/misc/ssi/ssi_driver_bus.c b/drivers/misc/ssi/ssi_driver_bus.c
> new file mode 100644
> index 0000000..6a07ee0
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver_bus.c
> @@ -0,0 +1,192 @@
> +/*
> + * ssi_driver_bus.c
> + *
> + * Implements SSI bus, device and driver interface.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +#include <linux/device.h>
> +#include "ssi_driver.h"
> +
> +/* LDM. defintions for the ssi bus, ssi device, and ssi_device driver */
> +struct bus_type ssi_bus_type;
> +
> +static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
> + char *buf)
> +{
> + return snprintf(buf, BUS_ID_SIZE + 1, "%s%s\n", SSI_PREFIX,
> + dev->bus_id);
> +}
> +
> +static struct device_attribute ssi_dev_attrs[] = {
> + __ATTR_RO(modalias),
> + __ATTR_NULL,
> +};
> +
> +static int ssi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> + add_uevent_var(env, "MODALIAS=%s%s", SSI_PREFIX, dev->bus_id);
> + return 0;
> +}
> +
> +/* NOTE: Function called in interrupt context */
> +static int ssi_e_handler(struct device_driver *drv, void *p_event)
> +{
> + struct ssi_port_event *event = (struct ssi_port_event *)p_event;
> + struct ssi_device_driver *ssi_drv = to_ssi_device_driver(drv);
> + struct ssi_port *p = event->ssi_port;
> +
> + BUG_ON(p_event == NULL);
> +
> + if ((ssi_drv->port_event) &&
> + (test_bit(event->event, &ssi_drv->event_mask)) &&
> + ((p->ssi_controller->id == -1) ||
> + (test_bit(p->ssi_controller->id, &ssi_drv->ctrl_mask))) &&
> + (ssi_drv->ch_mask[p->port_number - 1] != 0)) {
> +
> + (*ssi_drv->port_event)(p->ssi_controller->id, p->port_number,
> + event->event, event->priv);
> + }
> +
> + return 0;
> +}
> +
> +int ssi_port_event_handler(struct ssi_port *p, unsigned int event, void *arg)
> +{
> + int err = 0;
> + struct ssi_port_event p_ev = {
> + .ssi_port = p,
> + .event = event,
> + .priv = arg
> + };
> +
> + BUG_ON(p == NULL);
> +
> + err = bus_for_each_drv(&ssi_bus_type, NULL, &p_ev, ssi_e_handler);
> +
> + return err;
> +}
> +
> +static int ssi_bus_match(struct device *device, struct device_driver *driver)
> +{
> + struct ssi_device *dev = to_ssi_device(device);
> + struct ssi_device_driver *drv = to_ssi_device_driver(driver);
> +
> + if (!test_bit(dev->n_ctrl, &drv->ctrl_mask))
> + return 0;
> +
> + if (!test_bit(dev->n_ch, &drv->ch_mask[dev->n_p]))
> + return 0;
> +
> + return 1;
> +}
> +
> +int ssi_bus_unreg_dev(struct device *device, void *p)
> +{
> + device->release(device);
> + device_unregister(device);
> +
> + return 0;
> +}
> +
> +int __init ssi_bus_init(void)
> +{
> +
> + return bus_register(&ssi_bus_type);
> +
> +}
> +
> +void ssi_bus_exit(void)
> +{
> + bus_for_each_dev(&ssi_bus_type, NULL, NULL, ssi_bus_unreg_dev);
> + bus_unregister(&ssi_bus_type);
> +}
> +
> +static int ssi_driver_probe(struct device *dev)
> +{
> + struct ssi_device_driver *drv = to_ssi_device_driver(dev->driver);
> +
> + return drv->probe(to_ssi_device(dev));
^ trailing whitespace
> +}
> +
> +static int ssi_driver_remove(struct device *dev)
> +{
> + struct ssi_device_driver *drv = to_ssi_device_driver(dev->driver);
> +
> + return drv->remove(to_ssi_device(dev));
> +}
> +
> +static int ssi_driver_suspend(struct device *dev, pm_message_t mesg)
> +{
> + struct ssi_device_driver *drv = to_ssi_device_driver(dev->driver);
> +
> + return drv->suspend(to_ssi_device(dev), mesg);
> +}
> +
> +static int ssi_driver_resume(struct device *dev)
> +{
> + struct ssi_device_driver *drv = to_ssi_device_driver(dev->driver);
> +
> + return drv->resume(to_ssi_device(dev));
> +}
> +
> +struct bus_type ssi_bus_type = {
> + .name = "ssi",
> + .dev_attrs = ssi_dev_attrs,
> + .match = ssi_bus_match,
> + .uevent = ssi_bus_uevent,
tabify these
.name = "ssi",
.dev_attrs = ssi_dev_attrs,
.match = ssi_bus_match,
.uevent = ssi_bus_uevent,
> +};
> +
> +/**
> + * register_ssi_driver - Register SSI device driver
> + * @driver - reference to the SSI device driver.
> + */
> +int register_ssi_driver(struct ssi_device_driver *driver)
> +{
> + int ret = 0;
> +
> + BUG_ON(driver == NULL);
don't bug, just return. BUG will oops the kernel. Returning would be
more appropriate since what needs fix is the driver trying to register
not the bus driver.
> +
> + driver->driver.bus = &ssi_bus_type;
> + if (driver->probe)
> + driver->driver.probe = ssi_driver_probe;
> + if (driver->remove)
> + driver->driver.remove = ssi_driver_remove;
> + if (driver->suspend)
> + driver->driver.suspend = ssi_driver_suspend;
> + if (driver->resume)
> + driver->driver.resume = ssi_driver_resume;
> +
> + ret = driver_register(&driver->driver);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(register_ssi_driver);
> +
> +/**
> + * unregister_ssi_driver - Unregister SSI device driver
> + * @driver - reference to the SSI device driver.
> + */
> +void unregister_ssi_driver(struct ssi_device_driver *driver)
> +{
> + BUG_ON(driver == NULL);
ditto.
> +
> + driver_unregister(&driver->driver);
> +}
> +EXPORT_SYMBOL(unregister_ssi_driver);
> diff --git a/drivers/misc/ssi/ssi_driver_dma.c b/drivers/misc/ssi/ssi_driver_dma.c
> new file mode 100644
> index 0000000..2524a12
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver_dma.c
> @@ -0,0 +1,406 @@
> +/*
> + * ssi_driver_dma.c
> + *
> + * Implements SSI low level interface driver functionality with DMA support.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +#include <linux/dma-mapping.h>
> +#include "ssi_driver.h"
> +
> +#define SSI_SYNC_WRITE 0
> +#define SSI_SYNC_READ 1
^^ trailing whitespaces
> +
> +static unsigned char sync_table[2][2][8] = {
> + {
> + {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08},
> + {0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x00}
> + },
> + {
}, { would look better
> + {0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17},
> + {0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F}
> + }
> +};
> +
> +static unsigned int get_sync_type(unsigned int sync)
> +{
> + return (sync & 0x10) ? SSI_SYNC_READ : SSI_SYNC_WRITE;
> +}
> +
> +static unsigned int get_sync_port(unsigned int sync)
> +{
> + if (((sync >= 0x01) && (sync <= 0x08)) ||
> + ((sync >= 0x10) && (sync <= 0x17)))
> + return 1;
> + else if (((sync >= 0x09) && (sync <= 0x0F)) ||
> + ((sync >= 0x18) && (sync <= 0x1E)))
> + return 2;
> + else
> + return 3;
> +}
> +
> +static unsigned int get_sync_channel(unsigned int sync)
> +{
> + if ((sync == 0x00) || (sync == 0x1F))
> + return 8;
> +
> + if (sync & 0x10)
> + return (sync & 0x0F) % 8;
> + else
> + return (sync - 1) % 8;
> +}
> +
> +static unsigned int get_sync(unsigned int port,
> + unsigned int channel, unsigned int type)
> +{
> + if ((port == 0) || (port > SSI_MAX_PORTS) ||
> + (channel >= SSI_PORT_MAX_CH) || (type > SSI_SYNC_READ))
> + return 0x00;
> +
> + return sync_table[type][port - 1][channel];
> +}
> +
> +static void rst_ch_read(struct ssi_dev *ssi_ctrl,
> + unsigned int n_p, unsigned int n_ch)
> +{
> + struct ssi_channel *ch =
> + &ssi_ctrl->ssi_port[n_p - 1].ssi_channel[n_ch];
> +
> + ch->read_data.addr = NULL;
> + ch->read_data.size = 0;
> + ch->read_data.lch = -1;
> +}
> +
> +static void rst_ch_write(struct ssi_dev *ssi_ctrl,
> + unsigned int n_p, unsigned int n_ch)
> +{
> + struct ssi_channel *ch =
> + &ssi_ctrl->ssi_port[n_p - 1].ssi_channel[n_ch];
> +
> + ch->write_data.addr = NULL;
> + ch->write_data.size = 0;
> + ch->write_data.lch = -1;
> +}
> +
> +/*
> + * get_free_lch - Get a free GDD(DMA)logical channel
> + * @ssi_ctrl- SSI controller of the GDD.
> + *
> + * Needs to be called holding the gdd controller lock
> + */
> +static unsigned int get_free_lch(struct ssi_dev *ssi_ctrl)
> +{
> + unsigned int enable_reg;
> + unsigned int lch = 0;
> +
> + enable_reg = ssi_inl(ssi_ctrl->base, SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + while ((lch < SSI_NUM_LCH) && (enable_reg & SSI_GDD_LCH(lch)))
> + lch++;
> +
> + return lch;
> +}
> +
> +/*
> + * ssi_driver_write_dma - Program GDD [DMA] to write data from memory to
> + * the ssi channel buffer.
> + * @ssi_channel - pointer to the ssi_channel to write data to.
> + * @data - 32-bit word pointer to the data.
> + * @size - Number of 32bit words to be transfered.
> + *
> + * ssi_controller lock must be hold before calling this function.
> + */
> +int ssi_driver_write_dma(struct ssi_channel *ssi_channel, u32 *data,
> + unsigned int size)
> +{
> + struct ssi_dev *ssi_ctrl = ssi_channel->ssi_port->ssi_controller;
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int port = ssi_channel->ssi_port->port_number;
> + unsigned int channel = ssi_channel->channel_number;
> + unsigned int sync;
> + int lch;
> + dma_addr_t dma_data;
> + u32 s_addr;
> + u16 tmp;
> +
> + if ((size < 1) || (data == NULL))
> + return -EINVAL;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> +
> + lch = get_free_lch(ssi_ctrl);
> + if (lch >= SSI_NUM_LCH) {
> + dev_err(&ssi_ctrl->pdev->dev, "No free GDD logical "
> + "channels.\n");
> + clk_disable(ssi_ctrl->ssi_clk);
> + return -EBUSY; /* No free GDD logical channels. */
> + }
> + /* NOTE: Gettting a free gdd logical channel and
> + * reserve it must be done atomicaly. */
> + ssi_channel->write_data.lch = lch;
> +
> + sync = get_sync(port, channel, SSI_SYNC_WRITE);
> + dma_data = dma_map_single(NULL, data, size * 4, DMA_TO_DEVICE);
> + dma_sync_single(NULL, dma_data, size * 4, DMA_TO_DEVICE);
> +
> + tmp = SSI_SRC_SINGLE_ACCESS0 |
> + SSI_SRC_MEMORY_PORT |
> + SSI_DST_SINGLE_ACCESS0 |
> + SSI_DST_PERIPHERAL_PORT |
> + SSI_DATA_TYPE_S32;
> + ssi_outw(tmp, base, SSI_GDD_CSDP_REG(lch));
> + tmp = SSI_SRC_AMODE_POSTINC | SSI_DST_AMODE_CONST | sync;
> + ssi_outw(tmp, base, SSI_GDD_CCR_REG(lch));
> + ssi_outw((SSI_BLOCK_IE | SSI_TOUT_IE), base, SSI_GDD_CICR_REG(lch));
> + s_addr = (u32)base + SSI_SST_BUFFER_CH_REG(port, channel);
> + ssi_outl(s_addr, base, SSI_GDD_CDSA_REG(lch));
> + ssi_outl(dma_data, base, SSI_GDD_CSSA_REG(lch));
> + ssi_outw(size, base, SSI_GDD_CEN_REG(lch));
> + ssi_outl_or(SSI_GDD_LCH(lch), base, SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + ssi_outw_or(SSI_CCR_ENABLE, base, SSI_GDD_CCR_REG(lch));
> +
> + return 0;
> +}
> +
> +/*
> + * ssi_driver_read_dma - Program GDD [DMA] to write data to memory from
> + * the ssi channel buffer.
> + * @ssi_channel - pointer to the ssi_channel to read data from.
> + * @data - 32-bit word pointer where to store the incoming data.
> + * @size - Number of 32bit words to be transfered to the buffer.
> + *
> + * ssi_controller lock must be hold before calling this function.
> + */
> +int ssi_driver_read_dma(struct ssi_channel *ssi_channel, u32 *data,
> + unsigned int count)
> +{
> + struct ssi_dev *ssi_ctrl = ssi_channel->ssi_port->ssi_controller;
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int port = ssi_channel->ssi_port->port_number;
> + unsigned int channel = ssi_channel->channel_number;
> + unsigned int sync;
> + unsigned int lch;
> + dma_addr_t dma_data;
> + u32 d_addr;
> + u16 tmp;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> + lch = get_free_lch(ssi_ctrl);
> + if (lch >= SSI_NUM_LCH) {
> + dev_err(&ssi_ctrl->pdev->dev, "No free GDD logical "
> + "channels.\n");
> + clk_disable(ssi_ctrl->ssi_clk);
> + return -EBUSY; /* No free GDD logical channels. */
> + }
> + /*
> + * NOTE: Gettting a free gdd logical channel and
> + * reserve it must be done atomicaly.
> + */
> + ssi_channel->read_data.lch = lch;
> +
> + sync = get_sync(port, channel, SSI_SYNC_READ);
> +
> + dma_data = dma_map_single(NULL, data, count * 4, DMA_FROM_DEVICE);
> +
> + tmp = SSI_DST_SINGLE_ACCESS0 |
> + SSI_DST_MEMORY_PORT |
> + SSI_SRC_SINGLE_ACCESS0 |
> + SSI_SRC_PERIPHERAL_PORT |
> + SSI_DATA_TYPE_S32;
> + ssi_outw(tmp, base, SSI_GDD_CSDP_REG(lch));
> + tmp = SSI_DST_AMODE_POSTINC | SSI_SRC_AMODE_CONST | sync;
> + ssi_outw(tmp, base, SSI_GDD_CCR_REG(lch));
> + ssi_outw((SSI_BLOCK_IE | SSI_TOUT_IE), base, SSI_GDD_CICR_REG(lch));
> + d_addr = (u32)base + SSI_SSR_BUFFER_CH_REG(port, channel);
> + ssi_outl(d_addr, base, SSI_GDD_CSSA_REG(lch));
> + ssi_outl((u32)dma_data, base, SSI_GDD_CDSA_REG(lch));
> + ssi_outw(count, base, SSI_GDD_CEN_REG(lch));
> +
> + ssi_outl_or(SSI_GDD_LCH(lch), base, SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + ssi_outw_or(SSI_CCR_ENABLE, base, SSI_GDD_CCR_REG(lch));
> +
> + return 0;
> +}
> +
> +void ssi_driver_cancel_write_dma(struct ssi_channel *ssi_ch)
> +{
> + int lch = ssi_ch->write_data.lch;
> + unsigned int port = ssi_ch->ssi_port->port_number;
> + unsigned int channel = ssi_ch->channel_number;
> + struct ssi_dev *ssi_ctrl = ssi_ch->ssi_port->ssi_controller;
> + u32 ccr;
> +
> + if (lch < 0)
> + return;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> + ccr = ssi_inw(ssi_ctrl->base, SSI_GDD_CCR_REG(lch));
> + if (!(ccr & SSI_CCR_ENABLE)) {
> + dev_dbg(&ssi_ch->dev->device, LOG_NAME "Write cancel on not "
> + "enabled logical channel %d CCR REG 0x%08X\n", lch, ccr);
> + clk_disable(ssi_ctrl->ssi_clk);
> + return;
> + }
> +
> + ssi_outw_and(~SSI_CCR_ENABLE, ssi_ctrl->base, SSI_GDD_CCR_REG(lch));
> + ssi_outl_and(~SSI_GDD_LCH(lch), ssi_ctrl->base,
> + SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + ssi_outl(SSI_GDD_LCH(lch), ssi_ctrl->base,
> + SSI_SYS_GDD_MPU_IRQ_STATUS_REG);
> +
> + ssi_outl_and(~NOTFULL(channel), ssi_ctrl->base,
> + SSI_SST_BUFSTATE_REG(port));
> +
> +
> + ssi_ch->write_data.addr = NULL;
> + ssi_ch->write_data.size = 0;
> + ssi_ch->write_data.lch = -1;
> + clk_disable(ssi_ctrl->ssi_clk);
> + clk_disable(ssi_ctrl->ssi_clk);
> +}
> +
> +void ssi_driver_cancel_read_dma(struct ssi_channel *ssi_ch)
> +{
> + int lch = ssi_ch->read_data.lch;
> + struct ssi_dev *ssi_ctrl = ssi_ch->ssi_port->ssi_controller;
> + unsigned int port = ssi_ch->ssi_port->port_number;
> + unsigned int channel = ssi_ch->channel_number;
> + u32 reg;
> +
> + if (lch < 0)
> + return;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> + reg = ssi_inw(ssi_ctrl->base, SSI_GDD_CCR_REG(lch));
> + if (!(reg & SSI_CCR_ENABLE)) {
> + dev_dbg(&ssi_ch->dev->device, LOG_NAME "Read cancel on not "
> + "enable logical channel %d CCR REG 0x%08X\n", lch, reg);
> + clk_disable(ssi_ctrl->ssi_clk);
> + return;
> + }
> +
> + ssi_outw_and(~SSI_CCR_ENABLE, ssi_ctrl->base, SSI_GDD_CCR_REG(lch));
> + ssi_outl_and(~SSI_GDD_LCH(lch), ssi_ctrl->base,
> + SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + ssi_outl(SSI_GDD_LCH(lch), ssi_ctrl->base,
> + SSI_SYS_GDD_MPU_IRQ_STATUS_REG);
> +
> + ssi_outl_and(~NOTEMPTY(channel), ssi_ctrl->base,
> + SSI_SSR_BUFSTATE_REG(port));
> +
> + ssi_ch->read_data.addr = NULL;
> + ssi_ch->read_data.size = 0;
> + ssi_ch->read_data.lch = -1;
> + clk_disable(ssi_ctrl->ssi_clk);
> + clk_disable(ssi_ctrl->ssi_clk);
> +}
> +
> +static void dma_read_cb(struct ssi_dev *ctrl, unsigned int port,
> + unsigned int channel)
> +{
> + struct ssi_channel *ch = &ctrl->ssi_port[port - 1].ssi_channel[channel];
> +
> + ch->ops.read_done(ch->dev);
> +}
> +
> +static void dma_write_cb(struct ssi_dev *ctrl, unsigned int port,
> + unsigned int channel)
> +{
> + struct ssi_channel *ch = &ctrl->ssi_port[port - 1].ssi_channel[channel];
> +
> + ch->ops.write_done(ch->dev);
> +}
> +
> +static void do_gdd_lch(struct ssi_dev *ssi_ctrl, unsigned int gdd_lch)
> +{
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int port;
> + unsigned int channel;
> + u32 sync;
> + u32 gdd_csr;
> + dma_addr_t dma_h;
> + size_t size;
> +
> + sync = ssi_inw(base, SSI_GDD_CCR_REG(gdd_lch)) & SSI_CCR_SYNC_MASK;
> + port = get_sync_port(sync);
> + channel = get_sync_channel(sync);
> +
> + spin_lock(&ssi_ctrl->lock);
> +
> + ssi_outl_and(~SSI_GDD_LCH(gdd_lch), base,
> + SSI_SYS_GDD_MPU_IRQ_ENABLE_REG);
> + gdd_csr = ssi_inw(base, SSI_GDD_CSR_REG(gdd_lch));
> +
> + if (!(gdd_csr & SSI_CSR_TOUR)) {
> + if (get_sync_type(sync) == SSI_SYNC_READ) {
> + dma_h = ssi_inl(base, SSI_GDD_CDSA_REG(gdd_lch));
> + size = ssi_inw(base, SSI_GDD_CEN_REG(gdd_lch)) * 4;
> + dma_sync_single(NULL, dma_h, size, DMA_FROM_DEVICE);
> + rst_ch_read(ssi_ctrl, port, channel);
> + spin_unlock(&ssi_ctrl->lock);
> + dma_read_cb(ssi_ctrl, port, channel);
> + } else {
> + rst_ch_write(ssi_ctrl, port, channel);
> + spin_unlock(&ssi_ctrl->lock);
> + dma_write_cb(ssi_ctrl, port, channel);
> + }
> + } else {
> + dev_err(&ssi_ctrl->pdev->dev, "Error on GDD transfer "
> + "on gdd channel %d port %d channel %d\n",
> + gdd_lch, port, channel);
> + spin_unlock(&ssi_ctrl->lock);
> + ssi_port_event_handler(&ssi_ctrl->ssi_port[port - 1],
> + SSI_EVENT_ERROR, NULL);
> + }
> +}
> +
> +void do_ssi_gdd_tasklet(unsigned long device)
> +{
> + struct ssi_dev *ssi_ctrl = (struct ssi_dev *)device;
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int gdd_lch = 0;
> + u32 status_reg = 0;
> + u32 lch_served = 0;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> +
> + status_reg = ssi_inl(base, SSI_SYS_GDD_MPU_IRQ_STATUS_REG);
> +
> + for (gdd_lch = 0; gdd_lch < SSI_NUM_LCH; gdd_lch++) {
> + if (status_reg & SSI_GDD_LCH(gdd_lch)) {
> + do_gdd_lch(ssi_ctrl, gdd_lch);
> + lch_served |= SSI_GDD_LCH(gdd_lch);
> + clk_disable(ssi_ctrl->ssi_clk);
> + }
> + }
> +
> + ssi_outl(lch_served, base, SSI_SYS_GDD_MPU_IRQ_STATUS_REG);
> + clk_disable(ssi_ctrl->ssi_clk);
> +
> + enable_irq(ssi_ctrl->gdd_irq);
> +}
> +
> +irqreturn_t ssi_gdd_mpu_handler(int irq, void *ssi_controller)
> +{
> + struct ssi_dev *ssi_ctrl = (struct ssi_dev *)ssi_controller;
> +
> + tasklet_hi_schedule(&ssi_ctrl->ssi_gdd_tasklet);
> + disable_irq_nosync(ssi_ctrl->gdd_irq);
> +
> + return IRQ_HANDLED;
> +}
> diff --git a/drivers/misc/ssi/ssi_driver_if.c b/drivers/misc/ssi/ssi_driver_if.c
> new file mode 100644
> index 0000000..385467e
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver_if.c
> @@ -0,0 +1,335 @@
> +/*
> + * ssi_driver_if.c
> + *
> + * Implements SSI hardware driver interfaces for the upper layers.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include "ssi_driver.h"
> +
> +/**
> + * ssi_open - open a ssi device channel.
> + * @dev - Reference to the ssi device channel to be openned.
> + *
> + * Returns 0 on success, -EINVAL on bad parameters, -EBUSY if is already opened.
> + */
> +int ssi_open(struct ssi_device *dev)
> +{
> + struct ssi_channel *ch;
> + struct ssi_port *port;
> + struct ssi_dev *ssi_ctrl;
> +
> + if (!dev || !dev->ch) {
> + pr_err(LOG_NAME "Wrong SSI device %p\n", dev);
> + return -EINVAL;
> + }
> +
> + ch = dev->ch;
> + if (!ch->ops.read_done || !ch->ops.write_done) {
> + dev_err(&dev->device, "Trying to open with no callbacks "
> + "registered\n");
> + return -EINVAL;
> + }
> + port = ch->ssi_port;
> + ssi_ctrl = port->ssi_controller;
> + spin_lock_bh(&ssi_ctrl->lock);
> + if (ch->flags & SSI_CH_OPEN) {
> + dev_err(&dev->device, "Port %d Channel %d already OPENED\n",
> + dev->n_p, dev->n_ch);
> + spin_unlock_bh(&ssi_ctrl->lock);
> + return -EBUSY;
> + }
> + clk_enable(ssi_ctrl->ssi_clk);
> + ch->flags |= SSI_CH_OPEN;
> + ssi_outl_or(SSI_ERROROCCURED | SSI_BREAKDETECTED, ssi_ctrl->base,
> + SSI_SYS_MPU_ENABLE_REG(port->port_number, port->n_irq));
> + clk_disable(ssi_ctrl->ssi_clk);
> + spin_unlock_bh(&ssi_ctrl->lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ssi_open);
> +
> +/**
> + * ssi_write - write data into the ssi device channel
> + * @dev - reference to the ssi device channel to write into.
> + * @data - pointer to a 32-bit word data to be written.
> + * @count - number of 32-bit word to be written.
> + *
> + * Return 0 on sucess, a negative value on failure.
> + * A success values only indicates that the request has been accepted.
> + * Transfer is only completed when the write_done callback is called.
> + *
> + */
> +int ssi_write(struct ssi_device *dev, u32 *data, unsigned int count)
> +{
> + struct ssi_channel *ch;
> + int err;
> +
> + if (unlikely(!dev || !dev->ch || !data || (count <= 0))) {
> + dev_err(&dev->device, "Wrong paramenters "
> + "ssi_device %p data %p count %d", dev, data, count);
> + return -EINVAL;
> + }
> + if (unlikely(!(dev->ch->flags & SSI_CH_OPEN))) {
> + dev_err(&dev->device, "SSI device NOT open\n");
> + return -EINVAL;
> + }
> +
> + ch = dev->ch;
> + spin_lock_bh(&ch->ssi_port->ssi_controller->lock);
> + ch->write_data.addr = data;
> + ch->write_data.size = count;
> +
> + if (count == 1)
> + err = ssi_driver_write_interrupt(ch, data);
> + else
> + err = ssi_driver_write_dma(ch, data, count);
> +
> + if (unlikely(err < 0)) {
> + ch->write_data.addr = NULL;
> + ch->write_data.size = 0;
> + }
> + spin_unlock_bh(&ch->ssi_port->ssi_controller->lock);
> +
> + return err;
> +
> +}
> +EXPORT_SYMBOL(ssi_write);
> +
> +/**
> + * ssi_read - read data from the ssi device channel
> + * @dev - ssi device channel reference to read data from.
> + * @data - pointer to a 32-bit word data to store the data.
> + * @count - number of 32-bit word to be stored.
> + *
> + * Return 0 on sucess, a negative value on failure.
> + * A success values only indicates that the request has been accepted.
> + * Data is only available in the buffer when the read_done callback is called.
> + *
> + */
> +int ssi_read(struct ssi_device *dev, u32 *data, unsigned int count)
> +{
> + struct ssi_channel *ch;
> + int err;
> +
> + if (unlikely(!dev || !dev->ch || !data || (count <= 0))) {
> + dev_err(&dev->device, "Wrong paramenters "
> + "ssi_device %p data %p count %d", dev, data, count);
> + return -EINVAL;
> + }
> + if (unlikely(!(dev->ch->flags & SSI_CH_OPEN))) {
> + dev_err(&dev->device, "SSI device NOT open\n");
> + return -EINVAL;
> + }
> +
> + ch = dev->ch;
> + spin_lock_bh(&ch->ssi_port->ssi_controller->lock);
> + ch->read_data.addr = data;
> + ch->read_data.size = count;
> +
> + if (count == 1)
> + err = ssi_driver_read_interrupt(ch, data);
> + else
> + err = ssi_driver_read_dma(ch, data, count);
> +
> + if (unlikely(err < 0)) {
> + ch->read_data.addr = NULL;
> + ch->read_data.size = 0;
> + }
> + spin_unlock_bh(&ch->ssi_port->ssi_controller->lock);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(ssi_read);
> +
> +void __ssi_write_cancel(struct ssi_channel *ch)
> +{
> + if (ch->write_data.size == 1)
> + ssi_driver_cancel_write_interrupt(ch);
> + else if (ch->write_data.size > 1)
> + ssi_driver_cancel_write_dma(ch);
> +
> +}
> +/**
> + * ssi_write_cancel - Cancel pending write request.
> + * @dev - ssi device channel where to cancel the pending write.
> + *
> + * write_done() callback will not be called after sucess of this function.
> + */
> +void ssi_write_cancel(struct ssi_device *dev)
> +{
> + if (unlikely(!dev || !dev->ch)) {
> + pr_err(LOG_NAME "Wrong SSI device %p\n", dev);
> + return;
> + }
> + if (unlikely(!(dev->ch->flags & SSI_CH_OPEN))) {
> + dev_err(&dev->device, "SSI device NOT open\n");
> + return;
> + }
> +
> + spin_lock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> + __ssi_write_cancel(dev->ch);
> + spin_unlock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> +}
> +EXPORT_SYMBOL(ssi_write_cancel);
> +
> +void __ssi_read_cancel(struct ssi_channel *ch)
> +{
> + if (ch->read_data.size == 1)
> + ssi_driver_cancel_read_interrupt(ch);
> + else if (ch->read_data.size > 1)
> + ssi_driver_cancel_read_dma(ch);
> +}
> +
> +/**
> + * ssi_read_cancel - Cancel pending read request.
> + * @dev - ssi device channel where to cancel the pending read.
> + *
> + * read_done() callback will not be called after sucess of this function.
> + */
> +void ssi_read_cancel(struct ssi_device *dev)
> +{
> + if (unlikely(!dev || !dev->ch)) {
> + pr_err(LOG_NAME "Wrong SSI device %p\n", dev);
> + return;
> + }
> +
> + if (unlikely(!(dev->ch->flags & SSI_CH_OPEN))) {
> + dev_err(&dev->device, "SSI device NOT open\n");
> + return;
> + }
> +
> + spin_lock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> + __ssi_read_cancel(dev->ch);
> + spin_unlock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> +
> +}
> +EXPORT_SYMBOL(ssi_read_cancel);
> +
> +/**
> + * ssi_ioctl - SSI I/O control
> + * @dev - ssi device channel reference to apply the I/O control
> + * (or port associated to it)
> + * @command - SSI I/O control command
> + * @arg - parameter associated to the control command. NULL, if no parameter.
> + *
> + * Return 0 on sucess, a negative value on failure.
> + *
> + */
> +int ssi_ioctl(struct ssi_device *dev, unsigned int command, void *arg)
> +{
> + struct ssi_channel *ch;
> + struct ssi_dev *ssi_ctrl;
> + void __iomem *base;
> + unsigned int port, channel;
> + u32 wake;
> + int err = 0;
> +
> + if (unlikely((!dev) ||
> + (!dev->ch) ||
> + (!dev->ch->ssi_port) ||
> + (!dev->ch->ssi_port->ssi_controller)) ||
> + (!(dev->ch->flags & SSI_CH_OPEN))) {
> + pr_err(LOG_NAME "SSI IOCTL Invalid parameter\n");
> + return -EINVAL;
> + }
> +
> +
> + ch = dev->ch;
> + ssi_ctrl = ch->ssi_port->ssi_controller;
> + port = ch->ssi_port->port_number;
> + channel = ch->channel_number;
> + base = ssi_ctrl->base;
> + clk_enable(ssi_ctrl->ssi_clk);
> +
> + switch (command) {
> + case SSI_IOCTL_WAKE_UP:
> + /* We only claim once the wake line per channel */
> + wake = ssi_inl(base, SSI_SYS_WAKE_REG(port));
> + if (!(wake & SSI_WAKE(channel))) {
> + clk_enable(ssi_ctrl->ssi_clk);
> + ssi_outl(SSI_WAKE(channel), base,
> + SSI_SYS_SET_WAKE_REG(port));
> + }
> + break;
> + case SSI_IOCTL_WAKE_DOWN:
> + wake = ssi_inl(base, SSI_SYS_WAKE_REG(port));
> + if ((wake & SSI_WAKE(channel))) {
> + ssi_outl(SSI_WAKE(channel), base,
> + SSI_SYS_CLEAR_WAKE_REG(port));
> + clk_disable(ssi_ctrl->ssi_clk);
> + }
> + break;
> + case SSI_IOCTL_SEND_BREAK:
> + ssi_outl(1, base, SSI_SST_BREAK_REG(port));
> + break;
> + case SSI_IOCTL_WAKE:
> + if (arg == NULL)
> + err = -EINVAL;
> + else
> + *(u32 *)arg = ssi_inl(base, SSI_SYS_WAKE_REG(port));
> + break;
> + default:
> + err = -ENOIOCTLCMD;
> + break;
> + }
> +
> + clk_disable(ssi_ctrl->ssi_clk);
> +
> + return err;
> +}
> +EXPORT_SYMBOL(ssi_ioctl);
> +
> +/**
> + * ssi_close - close given ssi device channel
> + * @dev - reference to ssi device channel.
> + */
> +void ssi_close(struct ssi_device *dev)
> +{
> + if (!dev || !dev->ch) {
> + pr_err(LOG_NAME "Trying to close wrong SSI device %p\n", dev);
> + return;
> + }
> +
> + spin_lock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> + if (dev->ch->flags & SSI_CH_OPEN) {
> + dev->ch->flags &= ~SSI_CH_OPEN;
> + __ssi_write_cancel(dev->ch);
> + __ssi_read_cancel(dev->ch);
> + }
> + spin_unlock_bh(&dev->ch->ssi_port->ssi_controller->lock);
> +
> +}
> +EXPORT_SYMBOL(ssi_close);
> +
> +/**
> + * ssi_dev_set_cb - register read_done() and write_done() callbacks.
> + * @dev - reference to ssi device channel where callbacks are associated.
> + * @r_cb - callback to signal read transfer completed.
> + * @w_cb - callback to signal write transfer completed.
> + */
> +void ssi_dev_set_cb(struct ssi_device *dev, void (*r_cb)(struct ssi_device *dev)
> + , void (*w_cb)(struct ssi_device *dev))
> +{
> + dev->ch->ops.read_done = r_cb;
> + dev->ch->ops.write_done = w_cb;
> +}
> +EXPORT_SYMBOL(ssi_dev_set_cb);
> diff --git a/drivers/misc/ssi/ssi_driver_int.c b/drivers/misc/ssi/ssi_driver_int.c
> new file mode 100644
> index 0000000..6491e48
> --- /dev/null
> +++ b/drivers/misc/ssi/ssi_driver_int.c
> @@ -0,0 +1,232 @@
> +/*
> + * ssi_driver_int.c
> + *
> + * Implements SSI interrupt functionality.
> + *
> + * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@...ia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +#include "ssi_driver.h"
> +
> +static void reset_ch_read(struct ssi_channel *ch)
> +{
> + ch->read_data.addr = NULL;
> + ch->read_data.size = 0;
> + ch->read_data.lch = -1;
> +}
> +
> +static void reset_ch_write(struct ssi_channel *ch)
> +{
> + ch->write_data.addr = NULL;
> + ch->write_data.size = 0;
> + ch->write_data.lch = -1;
> +}
> +
> +int ssi_driver_write_interrupt(struct ssi_channel *ch, u32 *data)
> +{
> + struct ssi_port *p = ch->ssi_port;
> + unsigned int port = p->port_number;
> + unsigned int channel = ch->channel_number;
> +
> + clk_enable(p->ssi_controller->ssi_clk);
> + ssi_outl_or(SSI_SST_DATAACCEPT(channel), p->ssi_controller->base,
> + SSI_SYS_MPU_ENABLE_REG(port, p->n_irq));
> +
> +
> + return 0;
> +}
> +
> +int ssi_driver_read_interrupt(struct ssi_channel *ch, u32 *data)
> +{
> + struct ssi_port *p = ch->ssi_port;
> + unsigned int port = p->port_number;
> + unsigned int channel = ch->channel_number;
> +
> + clk_enable(p->ssi_controller->ssi_clk);
> +
> + ssi_outl_or(SSI_SSR_DATAAVAILABLE(channel), p->ssi_controller->base,
> + SSI_SYS_MPU_ENABLE_REG(port, p->n_irq));
> +
> + clk_disable(p->ssi_controller->ssi_clk);
> +
> + return 0;
> +}
> +
> +void ssi_driver_cancel_write_interrupt(struct ssi_channel *ch)
> +{
> + struct ssi_port *p = ch->ssi_port;
> + unsigned int port = p->port_number;
> + unsigned int channel = ch->channel_number;
> + void __iomem *base = p->ssi_controller->base;
> + u32 enable;
> +
> + clk_enable(p->ssi_controller->ssi_clk);
> +
> + enable = ssi_inl(base, SSI_SYS_MPU_ENABLE_REG(port, p->n_irq));
> + if (!(enable & SSI_SST_DATAACCEPT(channel))) {
> + dev_dbg(&ch->dev->device, LOG_NAME "Write cancel on not "
> + "enabled channel %d ENABLE REG 0x%08X", channel, enable);
> + clk_disable(p->ssi_controller->ssi_clk);
> + return;
> + }
> + ssi_outl_and(~SSI_SST_DATAACCEPT(channel), base,
> + SSI_SYS_MPU_ENABLE_REG(port, p->n_irq));
> + ssi_outl_and(~NOTFULL(channel), base, SSI_SST_BUFSTATE_REG(port));
> + reset_ch_write(ch);
> +
> + clk_disable(p->ssi_controller->ssi_clk);
> + clk_disable(p->ssi_controller->ssi_clk);
> +
> +}
> +
> +void ssi_driver_cancel_read_interrupt(struct ssi_channel *ch)
> +{
> + struct ssi_port *p = ch->ssi_port;
> + unsigned int port = p->port_number;
> + unsigned int channel = ch->channel_number;
> + void __iomem *base = p->ssi_controller->base;
> +
> + clk_enable(p->ssi_controller->ssi_clk);
> +
> + ssi_outl_and(~SSI_SSR_DATAAVAILABLE(channel), base,
> + SSI_SYS_MPU_ENABLE_REG(port, p->n_irq));
> + ssi_outl_and(~NOTEMPTY(channel), base, SSI_SSR_BUFSTATE_REG(port));
> + reset_ch_read(ch);
> +
> + clk_disable(p->ssi_controller->ssi_clk);
> +}
> +
> +static void do_channel_tx(struct ssi_channel *ch)
> +{
> + struct ssi_dev *ssi_ctrl = ch->ssi_port->ssi_controller;
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int n_ch;
> + unsigned int n_p;
> + unsigned int irq;
> +
> + n_ch = ch->channel_number;
> + n_p = ch->ssi_port->port_number;
> + irq = ch->ssi_port->n_irq;
> +
> + spin_lock(&ssi_ctrl->lock);
> +
> + if (ch->write_data.addr == NULL) {
> + ssi_outl_and(~SSI_SST_DATAACCEPT(n_ch), base,
> + SSI_SYS_MPU_ENABLE_REG(n_p, irq));
> + reset_ch_write(ch);
> + spin_unlock(&ssi_ctrl->lock);
> + clk_disable(ssi_ctrl->ssi_clk);
> + (*ch->ops.write_done)(ch->dev);
> + } else {
> + ssi_outl(*(ch->write_data.addr), base,
> + SSI_SST_BUFFER_CH_REG(n_p, n_ch));
> + ch->write_data.addr = NULL;
> + spin_unlock(&ssi_ctrl->lock);
> + }
> +}
> +
> +static void do_channel_rx(struct ssi_channel *ch)
> +{
> + struct ssi_dev *ssi_ctrl = ch->ssi_port->ssi_controller;
> + void __iomem *base = ch->ssi_port->ssi_controller->base;
> + unsigned int n_ch;
> + unsigned int n_p;
> + unsigned int irq;
> +
> + n_ch = ch->channel_number;
> + n_p = ch->ssi_port->port_number;
> + irq = ch->ssi_port->n_irq;
> +
> + spin_lock(&ssi_ctrl->lock);
> +
> + *(ch->read_data.addr) = ssi_inl(base, SSI_SSR_BUFFER_CH_REG(n_p, n_ch));
> +
> + ssi_outl_and(~SSI_SSR_DATAAVAILABLE(n_ch), base,
> + SSI_SYS_MPU_ENABLE_REG(n_p, irq));
> + reset_ch_read(ch);
> +
> + spin_unlock(&ssi_ctrl->lock);
> +
> + (*ch->ops.read_done)(ch->dev);
> +}
> +
> +void do_ssi_tasklet(unsigned long ssi_port)
> +{
> + struct ssi_port *pport = (struct ssi_port *)ssi_port;
> + struct ssi_dev *ssi_ctrl = pport->ssi_controller;
> + void __iomem *base = ssi_ctrl->base;
> + unsigned int port = pport->port_number;
> + unsigned int channel = 0;
> + unsigned int irq = pport->n_irq;
> + u32 status_reg;
> + u32 enable_reg;
> + u32 ssr_err_reg;
> + u32 channels_served;
> +
> + clk_enable(ssi_ctrl->ssi_clk);
> +
> + channels_served = 0;
> + status_reg = ssi_inl(base, SSI_SYS_MPU_STATUS_REG(port, irq));
> + enable_reg = ssi_inl(base, SSI_SYS_MPU_ENABLE_REG(port, irq));
> +
> + for (channel = 0; channel < pport->max_ch; channel++) {
> + if ((status_reg & SSI_SST_DATAACCEPT(channel)) &&
> + (enable_reg & SSI_SST_DATAACCEPT(channel))) {
> + do_channel_tx(&pport->ssi_channel[channel]);
> + channels_served |= SSI_SST_DATAACCEPT(channel);
> + }
> +
> + if ((status_reg & SSI_SSR_DATAAVAILABLE(channel)) &&
> + (enable_reg & SSI_SSR_DATAAVAILABLE(channel))) {
> + do_channel_rx(&pport->ssi_channel[channel]);
> + channels_served |= SSI_SSR_DATAAVAILABLE(channel);
> + }
> + }
> +
> + if ((status_reg & SSI_BREAKDETECTED) &&
> + (enable_reg & SSI_BREAKDETECTED)) {
> + dev_info(&ssi_ctrl->pdev->dev,
> + "Hardware BREAK on port %d\n", port);
> + ssi_outl(0, base, SSI_SSR_BREAK_REG(port));
> + ssi_port_event_handler(pport, SSI_EVENT_BREAK_DETECTED, NULL);
> + }
> +
> + if (status_reg & SSI_ERROROCCURED) {
> + ssr_err_reg = ssi_inl(base, SSI_SSR_ERROR_REG(port));
> + dev_err(&ssi_ctrl->pdev->dev, "SSI ERROR Port %d: 0x%02x\n",
> + port, ssr_err_reg);
> + ssi_outl(ssr_err_reg, base, SSI_SSR_ERRORACK_REG(port));
> + ssi_port_event_handler(pport, SSI_EVENT_ERROR, NULL);
> + }
> +
> + ssi_outl((channels_served | SSI_ERROROCCURED | SSI_BREAKDETECTED), base,
> + SSI_SYS_MPU_STATUS_REG(port, irq));
> +
> + clk_disable(ssi_ctrl->ssi_clk);
> + enable_irq(pport->irq);
> +}
> +
> +irqreturn_t ssi_mpu_handler(int irq, void *ssi_port)
> +{
> + struct ssi_port *p = (struct ssi_port *)ssi_port;
unnecessary cast, remove.
> +
> + tasklet_hi_schedule(&p->ssi_tasklet);
> + disable_irq_nosync(p->irq);
> +
> + return IRQ_HANDLED;
> +}
this patch is really huge, I'm not finished with it. Still a lot to
review.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists