| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 9 Oct 2008 10:29:50 +0200
From: Folkert van Heusden <folkert@...heusden.com>
To: linux-kernel@...r.kernel.org
Subject: [2.6.27-rc7] oops in usbcore
Hi,
I got the following oops:
[ 135.687646] BUG: unable to handle kernel paging request at f88643c8
[ 135.687654] IP: [<f883c70a>] :usbcore:unlink1+0xab/0xb9
[ 135.687703] *pde = 34824067 *pte = 00000000
[ 135.687710] Oops: 0000 [#1]
[ 135.687715] Modules linked in: sata_via via_rng cpufreq_userspace snd_usb_audio snd_via82xx snd_mpu401_uart ff_memless i2c_viapro snd_hwdep snd_hda_intel dm_snapshot psmouse parport_pc cpufreq_powersave ide_pci_generic fan ppdev parport tun cpufreq_ondemand ipv6 nls_utf8 cifs nls_base nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc freq_table crypto_blkcipher aes_generic rng_core snd_pcm_oss snd_mixer_oss rfcomm l2cap bluetooth gameport snd_ac97_codec ac97_bus hwmon_vid firewire_sbp2 firewire_core crc_itu_t cdrom serio_raw snd_pcm snd_usb_lib snd_timer snd_page_alloc snd_rawmidi snd_seq_device videodev ftdi_sio v4l1_compat snd soundcore i2c_core hid usbserial pci_hotplug via_agp agpgart evdev ext3 jbd mbcache dm_mirror dm_log dm_mod ide_disk libata scsi_mod dock via_rhine mii via82cxxx usbcore ide_core via_velocity crc_ccitt processor thermal_sys [last unloaded: ehci_hcd]
[ 135.687798]
[ 135.687803] Pid: 3589, comm: lpc-ntpd Not tainted (2.6.27-rc7-c7-c7temp-100hz-ch341 #1)
[ 135.687809] EIP: 0060:[<f883c70a>] EFLAGS: 00010286 CPU: 0
[ 135.687841] EIP is at unlink1+0xab/0xb9 [usbcore]
[ 135.687846] EAX: f4b62000 EBX: f8864394 ECX: fffffffe EDX: f74a4d40
[ 135.687851] ESI: f4b62000 EDI: f74a4d40 EBP: f609ade8 ESP: f609add4
[ 135.687856] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 135.687861] Process lpc-ntpd (pid: 3589, ti=f609a000 task=f6fb8ae0 task.ti=f609a000)
[ 135.687865] Stack: fffffffe f609adec f74a4d40 f422f680 00000000 f609adf4 f883c7f6 f74a4d40
[ 135.687875] f609ae1c f883d8db f4802758 f4802740 f609ae14 c012b8b1 f42d0800 f42d0800
[ 135.687885] f422f680 00000000 f609ae34 f8976e03 22222222 f897fc08 f42d0800 f42d08c4
[ 135.687894] Call Trace:
[ 135.687901] [<f883c7f6>] ? usb_hcd_unlink_urb+0x15/0x22 [usbcore]
[ 135.687937] [<f883d8db>] ? usb_kill_urb+0x4d/0xc8 [usbcore]
[ 135.687970] [<c012b8b1>] ? flush_workqueue+0x3b/0x42
[ 135.687987] [<f8976e03>] ? ftdi_close+0xce/0xd6 [ftdi_sio]
[ 135.688022] [<f893782b>] ? serial_close+0x82/0x103 [usbserial]
[ 135.688042] [<c0230e38>] ? release_dev+0x18c/0x405
[ 135.688056] [<c0138f4c>] ? trace_hardirqs_on+0xb/0xd
[ 135.688068] [<c023117e>] ? tty_release+0xa/0xe
[ 135.688075] [<c0178279>] ? __fput+0x99/0x169
[ 135.688086] [<c017835f>] ? fput+0x16/0x18
[ 135.688092] [<c0175abd>] ? filp_close+0x50/0x5a
[ 135.688099] [<c011f6a7>] ? put_files_struct+0x67/0xa9
[ 135.688108] [<c011f720>] ? exit_files+0x37/0x3c
[ 135.688115] [<c0120c68>] ? do_exit+0x1c9/0x6e8
[ 135.688121] [<c011ad5d>] ? finish_task_switch+0x0/0xa1
[ 135.688129] [<c02c3715>] ? schedule+0x38c/0x3c0
[ 135.688139] [<c025c945>] ? sys_socketcall+0xe2/0x1a1
[ 135.688150] [<c01211e4>] ? do_group_exit+0x5d/0x83
[ 135.688156] [<c012121d>] ? sys_exit_group+0x13/0x15
[ 135.688163] [<c0103857>] ? sysenter_do_call+0x12/0x3f
[ 135.688171] =======================
[ 135.688173] Code: 89 fa e8 e7 fe ff ff b8 00 4f 85 f8 e8 b8 8e a8 c7 8b 55 f0 b8 00 4f 85 f8 e8 9f 8d a8 c7 eb 10 8b 9e bc 00 00 00 89 f0 8b 4d ec <ff> 53 34 89 c3 5e 89 d8 5f 5b 5e 5f 5d c3 55 89 e5 57 56 89 d6
[ 135.688216] EIP: [<f883c70a>] unlink1+0xab/0xb9 [usbcore] SS:ESP 0068:f609add4
[ 135.688256] ---[ end trace 72b733a963031dcf ]---
[ 135.688260] Fixing recursive fault but reboot is needed!
System:
VIA SN18000G epia C7 with 4GB of ram
lpc-ntpd is a atomic clock receiver driver doing read()-calls on an fd
from a serial device (connected via usb), nothing fancy
(http://vanheusden.com/lpc-ntpd/ ).
This oops is very much reproducable using the following script:
pyk-perl.mod:
=----------=--------------------------------------------------
#! /usr/bin/perl -w
use POSIX;
@mods = <>;
for(;;)
{
$n = floor(rand(@mods));
print $mods[$n]."\n";
if (rand(2) < 1.0)
{
system('rmmod ' . $mods[$n]);
}
else
{
system('modprobe ' . $mods[$n]);
}
}
--------------------------------------------------------------
invoked with:
lsmod | grep -v -e via_rhine -v -e mii | awk '{ print $1; }' | ./pyk-perl.mod
Folkert van Heusden
--
MultiTail cok yonlu kullanimli bir program, loglari okumak, verilen
kommandolari yerine getirebilen. Filter, renk verme, merge, 'diff-
view', vs. http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists