[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081009164351.26205.50193.stgit@localhost.localdomain>
Date: Thu, 09 Oct 2008 17:44:15 +0100
From: Alan Cox <alan@...hat.com>
To: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: [PATCH] libata: Better timeout recovery
Check for completed commands on a timeout, also implement data draining as
Mark Lord suggested. The former should help a lot on various promise
controllers which show random IRQ loss now and then, the latter at least for
me fixes the hanging DRQ cases I can test.
To get the lost IRQ recovery working better we really need to short circuit a
lot fo the recovery paths we trigger needlessly when EH finds that actually
all was well.
Signed-off-by: Alan Cox <alan@...hat.com>
---
drivers/ata/libata-eh.c | 19 +++++++++-
drivers/ata/libata-sff.c | 88 ++++++++++++++++++++++++++++++++++++++++++++-
drivers/ata/pata_isapnp.c | 12 +++++-
drivers/ata/pata_pcmcia.c | 35 +++++++++++++++++-
include/linux/libata.h | 5 +++
5 files changed, 153 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c1db2f2..fa48031 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -515,7 +515,7 @@ void ata_scsi_error(struct Scsi_Host *host)
/* For new EH, all qcs are finished in one of three ways -
* normal completion, error completion, and SCSI timeout.
- * Both cmpletions can race against SCSI timeout. When normal
+ * Both completions can race against SCSI timeout. When normal
* completion wins, the qc never reaches EH. When error
* completion wins, the qc has ATA_QCFLAG_FAILED set.
*
@@ -530,7 +530,19 @@ void ata_scsi_error(struct Scsi_Host *host)
int nr_timedout = 0;
spin_lock_irqsave(ap->lock, flags);
-
+
+ /* This must occur under the ap->lock as we don't want
+ a polled recovery to race the real interrupt handler
+
+ The lost_interrupt handler checks for any completed but
+ non-notified command and completes much like an IRQ handler.
+
+ We then fall into the error recovery code which will treat
+ this as if normal completion won the race */
+
+ if (ap->ops->lost_interrupt)
+ ap->ops->lost_interrupt(ap);
+
list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
struct ata_queued_cmd *qc;
@@ -574,6 +586,9 @@ void ata_scsi_error(struct Scsi_Host *host)
ap->eh_tries = ATA_EH_MAX_TRIES;
} else
spin_unlock_wait(ap->lock);
+
+ /* If we timed raced normal completion and there is nothing to
+ recover nr_timedout == 0 why exactly are we doing error recovery ? */
repeat:
/* invoke error handler */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2a4c516..ea7f0e1 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = {
.softreset = ata_sff_softreset,
.hardreset = sata_sff_hardreset,
.postreset = ata_sff_postreset,
+ .drain_fifo = ata_sff_drain_fifo,
.error_handler = ata_sff_error_handler,
.post_internal_cmd = ata_sff_post_internal_cmd,
@@ -64,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = {
.sff_irq_on = ata_sff_irq_on,
.sff_irq_clear = ata_sff_irq_clear,
+ .lost_interrupt = ata_sff_lost_interrupt,
+
.port_start = ata_sff_port_start,
};
@@ -1533,7 +1536,7 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
* RETURNS:
* One if interrupt was handled, zero if not (shared irq).
*/
-inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+unsigned int ata_sff_host_intr(struct ata_port *ap,
struct ata_queued_cmd *qc)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
@@ -1660,6 +1663,47 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
}
/**
+ * ata_sff_lost_interrupt - Check for an apparent lost interrupt
+ * @ap: port that appears to have timed out
+ *
+ * Called from the libata error handlers when the core code suspects
+ * an interrupt has been lost. If it has complete anything we can and
+ * then return. Interface must support altstatus for this faster
+ * recovery to occur.
+ *
+ * Locking:
+ * Caller holds host lock
+ */
+
+void ata_sff_lost_interrupt(struct ata_port *ap)
+{
+ u8 status;
+ struct ata_queued_cmd *qc;
+
+ /* Only one outstanding command per SFF channel */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ /* Check we have a live one.. */
+ if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE))
+ return;
+ /* We cannot lose an interrupt on a polled command */
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return;
+ /* See if the controller thinks it is still busy - if so the command
+ isn't a lost IRQ but is still in progress */
+ status = ata_sff_altstatus(ap);
+ if (!(status & ATA_BUSY))
+ return;
+
+ /* There was a command running, we are no longer busy and we have
+ no interrupt. */
+ ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n",
+ status);
+ /* Run the host interrupt logic as if the interrupt had not been
+ lost */
+ ata_sff_host_intr(ap, qc);
+}
+
+/**
* ata_sff_freeze - Freeze SFF controller port
* @ap: port to freeze
*
@@ -2073,6 +2117,39 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
}
/**
+ * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers
+ * @ap: port to drain
+ * @qc: command
+ *
+ * Drain the FIFO and device of any stuck data following a command
+ * failing to complete. In some cases this is neccessary before a
+ * reset will recover the device.
+ *
+ */
+
+void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
+{
+ int count;
+ struct ata_port *ap;
+
+ /* We only need to flush incoming data when a command was running */
+ if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+ return;
+
+ ap = qc->ap;
+ /* Drain up to 64K of data before we give up this recovery method */
+ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+ && count < 32768; count++)
+ ioread16(ap->ioaddr.data_addr);
+
+ /* Can become DEBUG later */
+ if (count)
+ ata_port_printk(ap, KERN_WARNING,
+ "drained %d bytes to clear DRQ.\n", count);
+
+}
+
+/**
* ata_sff_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*
@@ -2124,6 +2201,12 @@ void ata_sff_error_handler(struct ata_port *ap)
ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
+ /* We *MUST* do FIFO draining before we issue a reset as several
+ devices helpfully clear their internal state and will lock solid
+ if we touch the data port post reset. Pass qc in case anyone wants
+ to do different PIO/DMA recovery or has per command fixups */
+ if (ap->ops->drain_fifo)
+ ap->ops->drain_fifo(qc);
spin_unlock_irqrestore(ap->lock, flags);
@@ -2131,6 +2214,7 @@ void ata_sff_error_handler(struct ata_port *ap)
ata_eh_thaw_port(ap);
/* PIO and DMA engines have been stopped, perform recovery */
+
/* Ignore ata_sff_softreset if ctl isn't accessible and
* built-in hardresets if SCR access isn't available.
@@ -2830,6 +2914,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
EXPORT_SYMBOL_GPL(ata_sff_host_intr);
EXPORT_SYMBOL_GPL(ata_sff_interrupt);
+EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
EXPORT_SYMBOL_GPL(ata_sff_freeze);
EXPORT_SYMBOL_GPL(ata_sff_thaw);
EXPORT_SYMBOL_GPL(ata_sff_prereset);
@@ -2838,6 +2923,7 @@ EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
EXPORT_SYMBOL_GPL(ata_sff_softreset);
EXPORT_SYMBOL_GPL(sata_sff_hardreset);
EXPORT_SYMBOL_GPL(ata_sff_postreset);
+EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
EXPORT_SYMBOL_GPL(ata_sff_error_handler);
EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_sff_port_start);
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 15cdb91..eb50be8 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.5"
static struct scsi_host_template isapnp_sht = {
ATA_PIO_SHT(DRV_NAME),
@@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = {
.cable_detect = ata_cable_40wire,
};
+static struct ata_port_operations isapnp_noalt_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .cable_detect = ata_cable_40wire,
+ /* No altstatus so we don't want to use the lost interrupt poll */
+ .lost_interrupt = ATA_OP_NULL,
+};
+
/**
* isapnp_init_one - attach an isapnp interface
* @idev: PnP device
@@ -65,7 +72,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
ap = host->ports[0];
- ap->ops = &isapnp_port_ops;
+ ap->ops = &isapnp_noalt_port_ops;
ap->pio_mask = 1;
ap->flags |= ATA_FLAG_SLAVE_POSS;
@@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
pnp_port_start(idev, 1), 1);
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
+ ap->ops = &isapnp_port_ops;
}
ata_sff_std_ports(&ap->ioaddr);
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index d3f2c0d..d240d08 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.5"
/*
* Private data structure to glue stuff together
@@ -126,6 +126,38 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
return buflen;
}
+/**
+ * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
+ * @ap: port to drain
+ * @qc: command
+ *
+ * Drain the FIFO and device of any stuck data following a command
+ * failing to complete. In some cases this is neccessary before a
+ * reset will recover the device.
+ *
+ */
+
+void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+{
+ int count;
+ struct ata_port *ap;
+
+ /* We only need to flush incoming data when a command was running */
+ if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+ return;
+
+ ap = qc->ap;
+
+ /* Drain up to 64K of data before we give up this recovery method */
+ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+ && count < 65536;)
+ ioread8(ap->ioaddr.data_addr);
+
+ /* Can become DEBUG later */
+ ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
+ count);
+
+}
static struct scsi_host_template pcmcia_sht = {
ATA_PIO_SHT(DRV_NAME),
@@ -143,6 +175,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
.sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode_8bit,
+ .drain_fifo = pcmcia_8bit_drain_fifo,
};
#define CS_CHECK(fn, ret) \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 225bfc5..e4a72f6 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -767,6 +767,7 @@ struct ata_port_operations {
ata_reset_fn_t pmp_hardreset;
ata_postreset_fn_t pmp_postreset;
void (*error_handler)(struct ata_port *ap);
+ void (*lost_interrupt)(struct ata_port *ap);
void (*post_internal_cmd)(struct ata_queued_cmd *qc);
/*
@@ -808,6 +809,8 @@ struct ata_port_operations {
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
+
+ void (*drain_fifo)(struct ata_queued_cmd *qc);
#endif /* CONFIG_ATA_SFF */
ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1516,6 +1519,7 @@ extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
extern unsigned int ata_sff_host_intr(struct ata_port *ap,
struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
+extern void ata_sff_lost_interrupt(struct ata_port *ap);
extern void ata_sff_freeze(struct ata_port *ap);
extern void ata_sff_thaw(struct ata_port *ap);
extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
@@ -1528,6 +1532,7 @@ extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
+extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_sff_port_start(struct ata_port *ap);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists