[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <48EE7E0A.8040701@dgreaves.com>
Date: Thu, 09 Oct 2008 22:56:26 +0100
From: David Greaves <david@...eaves.com>
To: Smartmontools Mailing List
<smartmontools-support@...ts.sourceforge.net>,
linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: SMART to USB/sata dock in 2.6.27-rc5 doesn't work
Hi
I just bought a usb/sata adapter like this:
http://www.thinkgeek.com/computing/drives/a7ea/?cpg=ab
lsusb -v is below
Works OK as a hot-plug SATA disk so I can check what's on that old disk in the
corner; but smartctl doesn't work so I can't see if it has any errors, run
selftests etc.
Kernel is 2.6.27-rc5 (I've also tried older kernels)
I plugged a previously zeroed drive in and...
root@ash:~ # smartctl -a /dev/sde
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ST332062 0AS Version:
Device type: disk
Local Time is: Thu Oct 9 21:38:16 2008 BST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Error Counter logging not supported
Device does not support Self Test logging
I've tried -dscsi and -dsat but they don't work.
More info below.
David
dmesg tail:
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 8:0:0:0: Direct-Access ST332062 0AS PQ: 0 ANSI: 2
sd 8:0:0:0: [sde] 625134827 512-byte hardware sectors (320069 MB)
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 38 00 00 00
sd 8:0:0:0: [sde] Assuming drive cache: write through
sd 8:0:0:0: [sde] 625134827 512-byte hardware sectors (320069 MB)
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 38 00 00 00
sd 8:0:0:0: [sde] Assuming drive cache: write through
sde: unknown partition table
sd 8:0:0:0: [sde] Attached SCSI disk
sd 8:0:0:0: Attached scsi generic sg6 type 0
root@ash:~ # lsusb -v -s3:3
Bus 003 Device 003: ID 04fc:0c25 Sunplus Technology Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04fc Sunplus Technology Co., Ltd
idProduct 0x0c25
bcdDevice 1.03
iManufacturer 2 Sunplus Technology Inc.
iProduct 3 USB to Serial-ATA bridge
iSerial 1 SAMSUNG HD472712CQ696126
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Bulk Only Configuration
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 5 Bulk Only Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
--
"Don't worry, you'll be fine; I saw it work in a cartoon once..."
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists