| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 10 Oct 2008 02:21:57 +0200
From: Ingo Molnar <mingo@...e.hu>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>
Subject: [git pull] x86 updates for v2.6.28, phase #10, roundup.
Linus,
Please pull the latest x86-v28-for-linus-phase10 git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-v28-for-linus-phase10
Remaining x86 topics: x86/xsave, x86/xen, x86/time, x86/setup,
x86/dumpstack, x86/cpu, x86/build, x86/spinlocks,
x86/memory-corruption-check, x86/idle,
x86/exports, x86/early-printk, x86/crashdump,
x86/commandline, x86/microcode, x86/quirks.
out-of-topic modifications in x86-v28-for-linus-phase10:
--------------------------------------------------------
MAINTAINERS # e7f5b30: x86: AMD microcode patch loading
drivers/base/power/main.c # 5394f80: x86: check for and defend against
drivers/usb/host/ehci.h # 0af3673: usb: move ehci reg def
drivers/video/Kconfig # a57a5c2: x86 setup: remove remnants of CON
drivers/video/console/Kconfig # a57a5c2: x86 setup: remove remnants of CON
include/linux/kernel.h # 9c3254a: x86: fix compile error with corru
# bb577f9: x86: add periodic corruption chec
# 5394f80: x86: check for and defend against
include/linux/usb/ehci_def.h # 0af3673: usb: move ehci reg def
scripts/Kbuild.include # 43789e2: kbuild: fix cc-option and cc-opti
Thanks,
Ingo
------------------>
Alexander van Heukelum (8):
dumpstack: x86: move die_nmi to dumpstack_32.c
dumpstack: x86: make printk_address equal
dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack
dumptrace: x86: consistently include loglevel, print stack switch
dumpstack: x86: use log_lvl and unify trace formatting
dumpstack: i386: make kstack= an early boot-param and add oops=panic
dumpstack: x86: various small unification steps
dumpstack: x86: various small unification steps, fix
Alexey Dobriyan (2):
x86 setup: remove remnants of CONFIG_VIDEO_SELECT (read: vga=)
x86: make setup_xstate_init() __init
Andrey Borzenkov (2):
x86: fix ghost EDD devices in /sys again
x86 setup: fix ghost entries under /sys/firmware/edd take 3
Arjan van de Ven (1):
x86: use round_jiffies() for the corruption check timer
Chuck Ebbert (1):
xen: make CONFIG_XEN_SAVE_RESTORE depend on CONFIG_XEN
David Woodhouse (1):
Fix date output in x86 microcode driver.
Dmitry Adamushko (6):
x86-microcode: fix unbalanced use of get_cpu()
x86-microcode: generic interface refactoring
x86, microcode rework, v2
x86: moved microcode.c to microcode_intel.c
x86, microcode_amd: cleanup, mark request_microcode_user() as unsupported
x86/microcode: fix sleeping function called from invalid context at kernel/mutex.c
Glauber Costa (13):
x86: use user_mode macro
x86: coalesce tests
x86: set bp field in pt_regs properly
x86: use frame pointer information on x86_64 profile_pc
x86: remove SEGMENT_IS_FLAT_CODE
x86: use user_mode_vm instead of user_mode
x86: bind irq0 irq data to cpu0
x86: factor out irq initialization for x86_64
x86: make init_ISA_irqs nonstatic
x86: rename timer_event_interrupt to timer_interrupt
x86: replace hardcoded number
x86: wrap MCA_bus test around an ifdef
x86: move vgetcpu mode probing to cpu detection
H. Peter Anvin (5):
x86: boot/compressed/Makefile: fix "make clean"
x86: when building image.iso, use isohybrid if it exists
kbuild: fix cc-option and cc-option-yn
x86: prevent binutils from being "smart" and generating NOPLs for us
Revert "x86: fix ghost EDD devices in /sys again"
Harvey Harrison (1):
x86: early_printk.c trivial sparse fixes
Hugh Dickins (1):
x86: add periodic corruption check
Ingo Molnar (8):
x86: usb debug port early console, fix
x86, microcode support: fix build error
x86, microcode: fix symbol exports
x86, microcode: fix module license string
x86, microcode rework, v2, fix
x86: add DMI quirk for AMI BIOS which corrupts address 0xc000 during resume
x86: reserve low 64K on AMI and Phoenix BIOS boxen
x86: add X86_RESERVE_LOW_64K
Jan Beulich (5):
x86: ticket spin locks: fix asm constraints
x86: ticket spin locks: factor out more common code
x86: ticket spin locks: reduce instruction dependencies
x86: init annotations in early_printk() setup
x86: adjust dependencies for CONFIG_X86_CMOV
Jeremy Fitzhardinge (6):
x86: check for and defend against BIOS memory corruption
x86: clean up memory corruption check and add more kernel parameters
x86: default corruption check to off, but put parameter default in Kconfig
x86: fix compile error with corruption checking disabled
xen: clean up x86-64 warnings
xen: remove unused balloon.h
Michal Januszewski (1):
x86: replace a magic number with a named constant in the VESA boot code
Paul Bolle (2):
x86 setup: remove DEF_INITSEG and DEF_SETUPSEG
x86 setup: remove IMAGE_OFFSET
Peter Oruba (20):
x86: AMD microcode patch loading support v2
x86: moved Intel microcode patch loader declarations to seperate header file
x86: typedef removal
x86: move per CPU microcode structure declaration to header file
x86: move microcode.c to microcode_intel.c
x86: code split to two parts
x86: structure declaration renaming
x86: add AMD specific declarations
x86: first step of refactoring, introducing microcode_ops
x86: major refactoring
x86: AMD microcode patch loading support
x86: AMD microcode patch loader style corrections
x86: Intel microcode patch loader style corrections
x86: moved function declarations out from AMD microcode patch loader to heade file
x86: minor pointer type cast in AMD microcode patch loader
x86: Microcode patch loader style corrections
x86: Fixed NULL function pointer dereference in AMD microcode patch loader.
x86, microcode rework, v2, renaming
x86, microcode rework, v2, renaming cont.
x86: microcode patch loader bugfix
Randy Dunlap (1):
x86, microcode_amd: fix shift warning
Yinghai Lu (5):
usb: move ehci reg def
x86: usb debug port early console, v4
x86: fix CONFIG_X86_RESERVE_LOW_64K=y
x86: fix macro with bad_bios_dmi_table
x86: cleanup, remove extra ifdef
Documentation/kernel-parameters.txt | 26 +-
MAINTAINERS | 5 +
arch/x86/Kconfig | 90 ++++-
arch/x86/Kconfig.debug | 13 +
arch/x86/Makefile_32.cpu | 5 +
arch/x86/boot/Makefile | 5 +-
arch/x86/boot/compressed/Makefile | 8 +-
arch/x86/boot/edd.c | 7 +-
arch/x86/boot/video-vesa.c | 2 +-
arch/x86/configs/i386_defconfig | 1 -
arch/x86/configs/x86_64_defconfig | 1 -
arch/x86/kernel/Makefile | 6 +-
arch/x86/kernel/cpu/common.c | 12 +
arch/x86/kernel/dumpstack_32.c | 157 ++++---
arch/x86/kernel/dumpstack_64.c | 38 +-
arch/x86/kernel/early_printk.c | 766 +++++++++++++++++++++++++++++++-
arch/x86/kernel/entry_64.S | 7 +
arch/x86/kernel/irqinit_64.c | 43 ++-
arch/x86/kernel/microcode.c | 853 -----------------------------------
arch/x86/kernel/microcode_amd.c | 435 ++++++++++++++++++
arch/x86/kernel/microcode_core.c | 508 +++++++++++++++++++++
arch/x86/kernel/microcode_intel.c | 480 ++++++++++++++++++++
arch/x86/kernel/setup.c | 196 ++++++++-
arch/x86/kernel/time_32.c | 7 +-
arch/x86/kernel/time_64.c | 23 +-
arch/x86/kernel/traps.c | 37 --
arch/x86/kernel/xsave.c | 2 +-
arch/x86/mm/init_32.c | 2 +
arch/x86/mm/init_64.c | 2 +
arch/x86/xen/Kconfig | 4 +-
arch/x86/xen/enlighten.c | 61 +--
arch/x86/xen/xen-asm_64.S | 20 +-
drivers/base/power/main.c | 1 +
drivers/usb/host/ehci.h | 138 +------
drivers/video/Kconfig | 2 -
drivers/video/console/Kconfig | 16 -
drivers/xen/balloon.c | 1 -
include/asm-x86/boot.h | 2 -
include/asm-x86/microcode.h | 47 ++
include/asm-x86/processor.h | 35 --
include/asm-x86/segment.h | 6 -
include/asm-x86/spinlock.h | 60 +--
include/linux/kernel.h | 17 +
include/linux/usb/ehci_def.h | 160 +++++++
include/xen/balloon.h | 61 ---
scripts/Kbuild.include | 4 +-
46 files changed, 2992 insertions(+), 1380 deletions(-)
delete mode 100644 arch/x86/kernel/microcode.c
create mode 100644 arch/x86/kernel/microcode_amd.c
create mode 100644 arch/x86/kernel/microcode_core.c
create mode 100644 arch/x86/kernel/microcode_intel.c
create mode 100644 include/asm-x86/microcode.h
create mode 100644 include/linux/usb/ehci_def.h
delete mode 100644 include/xen/balloon.h
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c5d891f..998877b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -658,11 +658,12 @@ and is between 256 and 4096 characters. It is defined in the file
earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
+ earlyprintk=dbgp
Append ",keep" to not disable it when the real console
takes over.
- Only vga or serial at a time, not both.
+ Only vga or serial or usb debug port at a time.
Currently only ttyS0 and ttyS1 are supported.
@@ -1227,6 +1228,29 @@ and is between 256 and 4096 characters. It is defined in the file
or
memmap=0x10000$0x18690000
+ memory_corruption_check=0/1 [X86]
+ Some BIOSes seem to corrupt the first 64k of
+ memory when doing things like suspend/resume.
+ Setting this option will scan the memory
+ looking for corruption. Enabling this will
+ both detect corruption and prevent the kernel
+ from using the memory being corrupted.
+ However, its intended as a diagnostic tool; if
+ repeatable BIOS-originated corruption always
+ affects the same memory, you can use memmap=
+ to prevent the kernel from using that memory.
+
+ memory_corruption_check_size=size [X86]
+ By default it checks for corruption in the low
+ 64k, making this memory unavailable for normal
+ use. Use this parameter to scan for
+ corruption in more or less memory.
+
+ memory_corruption_check_period=seconds [X86]
+ By default it checks for corruption every 60
+ seconds. Use this parameter to check at some
+ other rate. 0 disables periodic checking.
+
memtest= [KNL,X86] Enable memtest
Format: <integer>
range: 0,4 : pattern number
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c124d7..0f5227e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -390,6 +390,11 @@ L: iommu@...ts.linux-foundation.org
T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
+AMD MICROCODE UPDATE SUPPORT
+P: Peter Oruba
+M: peter.oruba@....com
+S: Supported
+
AMS (Apple Motion Sensor) DRIVER
P: Stelian Pop
M: stelian@...ies.net
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b667150..f84046d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -790,23 +790,45 @@ config X86_REBOOTFIXUPS
Say N otherwise.
config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - microcode support"
select FW_LOADER
---help---
If you say Y here, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
+ certain Intel and AMD processors. The Intel support is for the
+ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+ Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+ 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+ You will obviously need the actual microcode binary data itself
+ which is not shipped with the Linux kernel.
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ This option selects the general module only, you need to select
+ at least one vendor specific module as well.
To compile this driver as a module, choose M here: the
module will be called microcode.
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+ bool "Intel microcode patch loading support"
+ depends on MICROCODE
+ default MICROCODE
+ select FW_LOADER
+ --help---
+ This options enables microcode patch loading support for Intel
+ processors.
+
+ For latest news and information on obtaining all the required
+ Intel ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+ bool "AMD microcode patch loading support"
+ depends on MICROCODE
+ select FW_LOADER
+ --help---
+ If you select this option, microcode patch loading support for AMD
+ processors will be enabled.
+
+ config MICROCODE_OLD_INTERFACE
def_bool y
depends on MICROCODE
@@ -1073,6 +1095,56 @@ config HIGHPTE
low memory. Setting this option will put user-space page table
entries in high memory.
+config X86_CHECK_BIOS_CORRUPTION
+ bool "Check for low memory corruption"
+ help
+ Periodically check for memory corruption in low memory, which
+ is suspected to be caused by BIOS. Even when enabled in the
+ configuration, it is disabled at runtime. Enable it by
+ setting "memory_corruption_check=1" on the kernel command
+ line. By default it scans the low 64k of memory every 60
+ seconds; see the memory_corruption_check_size and
+ memory_corruption_check_period parameters in
+ Documentation/kernel-parameters.txt to adjust this.
+
+ When enabled with the default parameters, this option has
+ almost no overhead, as it reserves a relatively small amount
+ of memory and scans it infrequently. It both detects corruption
+ and prevents it from affecting the running system.
+
+ It is, however, intended as a diagnostic tool; if repeatable
+ BIOS-originated corruption always affects the same memory,
+ you can use memmap= to prevent the kernel from using that
+ memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ bool "Set the default setting of memory_corruption_check"
+ depends on X86_CHECK_BIOS_CORRUPTION
+ default y
+ help
+ Set whether the default state of memory_corruption_check is
+ on or off.
+
+config X86_RESERVE_LOW_64K
+ bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+ default y
+ help
+ Reserve the first 64K of physical RAM on BIOSes that are known
+ to potentially corrupt that memory range. A numbers of BIOSes are
+ known to utilize this area during suspend/resume, so it must not
+ be used by the kernel.
+
+ Set this to N if you are absolutely sure that you trust the BIOS
+ to get all its memory reservations and usages right.
+
+ If you have doubts about the BIOS (e.g. suspend/resume does not
+ work or there's kernel crashes after certain hardware hotplug
+ events) and it's not AMI or Phoenix, then you might want to enable
+ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+ corruption patterns.
+
+ Say Y if unsure.
+
config MATH_EMULATION
bool
prompt "Math emulation" if X86_32
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 092f019..2a3dfbd 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,6 +43,19 @@ config EARLY_PRINTK
with klogd/syslogd or the X server. You should normally N here,
unless you want to debug such a crash.
+config EARLY_PRINTK_DBGP
+ bool "Early printk via EHCI debug port"
+ default n
+ depends on EARLY_PRINTK && PCI
+ help
+ Write kernel log output directly into the EHCI debug port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash. You need usb debug device.
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 12bdd85..80177ec 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -44,3 +44,8 @@ cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx
# cpu entries
cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic,$(call tune,i686))
+# Bug fix for binutils: this option is required in order to keep
+# binutils from generating NOPL instructions against our will.
+ifneq ($(CONFIG_X86_P6_NOP),y)
+cflags-y += $(call cc-option,-Wa$(comma)-mtune=generic32,)
+endif
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 7ee102f..cd48c72 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -72,9 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
KBUILD_CFLAGS += $(call cc-option,-m32)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
-$(obj)/zImage: IMAGE_OFFSET := 0x1000
$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
@@ -117,7 +115,7 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE
$(call if_changed,objcopy)
$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
@@ -181,6 +179,7 @@ isoimage: $(BOOTIMAGE)
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
+ isohybrid $(obj)/image.iso 2>/dev/null || true
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 92fdd35..1771c80 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -27,9 +27,8 @@ $(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-ifeq ($(CONFIG_X86_32),y)
-targets += vmlinux.bin.all vmlinux.relocs
-hostprogs-y := relocs
+targets += vmlinux.bin.all vmlinux.relocs relocs
+hostprogs-$(CONFIG_X86_32) += relocs
quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -43,6 +42,8 @@ quiet_cmd_relocbin = BUILD $@
$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
$(call if_changed,relocbin)
+ifeq ($(CONFIG_X86_32),y)
+
ifdef CONFIG_RELOCATABLE
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
$(call if_changed,gzip)
@@ -59,6 +60,5 @@ $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
endif
-
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,ld)
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index d93cbc6..1aae8f3 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -41,6 +41,7 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
char *mbrbuf_ptr, *mbrbuf_end;
u32 buf_base, mbr_base;
extern char _end[];
+ u16 mbr_magic;
sector_size = ei->params.bytes_per_sector;
if (!sector_size)
@@ -58,11 +59,15 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
return -1;
+ memset(mbrbuf_ptr, 0, sector_size);
if (read_mbr(devno, mbrbuf_ptr))
return -1;
*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
- return 0;
+ mbr_magic = *(u16 *)&mbrbuf_ptr[510];
+
+ /* check for valid MBR magic */
+ return mbr_magic == 0xAA55 ? 0 : -1;
}
static int get_edd_info(u8 devno, struct edd_info *ei)
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 401ad99..1e6fe02 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -224,7 +224,7 @@ static void vesa_store_pm_info(void)
static void vesa_store_mode_params_graphics(void)
{
/* Tell the kernel we're in VESA graphics mode */
- boot_params.screen_info.orig_video_isVGA = 0x23;
+ boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
/* Mode parameters */
boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index c54b710..13b8c86 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1533,7 +1533,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 638bc85..f0a03d7 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1504,7 +1504,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4dc47a3..cb6ade4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -51,7 +51,6 @@ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
@@ -100,6 +99,11 @@ scx200-y += scx200_32.o
obj-$(CONFIG_OLPC) += olpc.o
+microcode-y := microcode_core.o
+microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o
+microcode-$(CONFIG_MICROCODE_AMD) += microcode_amd.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e378a16..db08541 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -730,12 +730,24 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
#endif
}
+#ifdef CONFIG_X86_64
+static void vgetcpu_set_mode(void)
+{
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
+ vgetcpu_mode = VGETCPU_RDTSCP;
+ else
+ vgetcpu_mode = VGETCPU_LSL;
+}
+#endif
+
void __init identify_boot_cpu(void)
{
identify_cpu(&boot_cpu_data);
#ifdef CONFIG_X86_32
sysenter_setup();
enable_sep_cpu();
+#else
+ vgetcpu_set_mode();
#endif
}
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index c398b27..201ee35 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -16,45 +16,31 @@
#include <asm/stacktrace.h>
+#define STACKSLOTS_PER_LINE 8
+#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :)
+
int panic_on_unrecovered_nmi;
-int kstack_depth_to_print = 24;
+int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static unsigned int code_bytes = 64;
static int die_counter;
void printk_address(unsigned long address, int reliable)
{
-#ifdef CONFIG_KALLSYMS
- unsigned long offset = 0;
- unsigned long symsize;
- const char *symname;
- char *modname;
- char *delim = ":";
- char namebuf[KSYM_NAME_LEN];
- char reliab[4] = "";
-
- symname = kallsyms_lookup(address, &symsize, &offset,
- &modname, namebuf);
- if (!symname) {
- printk(" [<%08lx>]\n", address);
- return;
- }
- if (!reliable)
- strcpy(reliab, "? ");
-
- if (!modname)
- modname = delim = "";
- printk(" [<%08lx>] %s%s%s%s%s+0x%lx/0x%lx\n",
- address, reliab, delim, modname, delim, symname, offset, symsize);
-#else
- printk(" [<%08lx>]\n", address);
-#endif
+ printk(" [<%p>] %s%pS\n", (void *) address,
+ reliable ? "" : "? ", (void *) address);
}
static inline int valid_stack_ptr(struct thread_info *tinfo,
- void *p, unsigned int size)
+ void *p, unsigned int size, void *end)
{
void *t = tinfo;
- return p > t && p <= t + THREAD_SIZE - size;
+ if (end) {
+ if (p < end && p >= (end-THREAD_SIZE))
+ return 1;
+ else
+ return 0;
+ }
+ return p > t && p < t + THREAD_SIZE - size;
}
/* The form of the top of the frame on the stack */
@@ -66,16 +52,17 @@ struct stack_frame {
static inline unsigned long
print_context_stack(struct thread_info *tinfo,
unsigned long *stack, unsigned long bp,
- const struct stacktrace_ops *ops, void *data)
+ const struct stacktrace_ops *ops, void *data,
+ unsigned long *end)
{
struct stack_frame *frame = (struct stack_frame *)bp;
- while (valid_stack_ptr(tinfo, stack, sizeof(*stack))) {
+ while (valid_stack_ptr(tinfo, stack, sizeof(*stack), end)) {
unsigned long addr;
addr = *stack;
if (__kernel_text_address(addr)) {
- if ((unsigned long) stack == bp + 4) {
+ if ((unsigned long) stack == bp + sizeof(long)) {
ops->address(data, addr, 1);
frame = frame->next_frame;
bp = (unsigned long) frame;
@@ -98,7 +85,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
if (!stack) {
unsigned long dummy;
stack = &dummy;
- if (task != current)
+ if (task && task != current)
stack = (unsigned long *)task->thread.sp;
}
@@ -106,7 +93,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
if (!bp) {
if (task == current) {
/* Grab bp right from our regs */
- asm("movl %%ebp, %0" : "=r" (bp) :);
+ get_bp(bp);
} else {
/* bp is the last reg pushed by switch_to */
bp = *(unsigned long *) task->thread.sp;
@@ -119,17 +106,13 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
- bp = print_context_stack(context, stack, bp, ops, data);
- /*
- * Should be after the line below, but somewhere
- * in early boot context comes out corrupted and we
- * can't reference it:
- */
- if (ops->stack(data, "IRQ") < 0)
- break;
+ bp = print_context_stack(context, stack, bp, ops, data, NULL);
+
stack = (unsigned long *)context->previous_esp;
if (!stack)
break;
+ if (ops->stack(data, "IRQ") < 0)
+ break;
touch_nmi_watchdog();
}
}
@@ -150,6 +133,7 @@ static void print_trace_warning(void *data, char *msg)
static int print_trace_stack(void *data, char *name)
{
+ printk("%s <%s> ", (char *)data, name);
return 0;
}
@@ -158,11 +142,9 @@ static int print_trace_stack(void *data, char *name)
*/
static void print_trace_address(void *data, unsigned long addr, int reliable)
{
- printk("%s [<%08lx>] ", (char *)data, addr);
- if (!reliable)
- printk("? ");
- print_symbol("%s\n", addr);
touch_nmi_watchdog();
+ printk(data);
+ printk_address(addr, reliable);
}
static const struct stacktrace_ops print_trace_ops = {
@@ -176,8 +158,8 @@ static void
show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp, char *log_lvl)
{
+ printk("%sCall Trace:\n", log_lvl);
dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
- printk("%s =======================\n", log_lvl);
}
void show_trace(struct task_struct *task, struct pt_regs *regs,
@@ -188,7 +170,7 @@ void show_trace(struct task_struct *task, struct pt_regs *regs,
static void
show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, unsigned long bp, char *log_lvl)
+ unsigned long *sp, unsigned long bp, char *log_lvl)
{
unsigned long *stack;
int i;
@@ -204,18 +186,17 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
for (i = 0; i < kstack_depth_to_print; i++) {
if (kstack_end(stack))
break;
- if (i && ((i % 8) == 0))
- printk("\n%s ", log_lvl);
- printk("%08lx ", *stack++);
+ if (i && ((i % STACKSLOTS_PER_LINE) == 0))
+ printk("\n%s", log_lvl);
+ printk(" %08lx", *stack++);
+ touch_nmi_watchdog();
}
- printk("\n%sCall Trace:\n", log_lvl);
-
+ printk("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
void show_stack(struct task_struct *task, unsigned long *sp)
{
- printk(" ");
show_stack_log_lvl(task, NULL, sp, 0, "");
}
@@ -229,7 +210,7 @@ void dump_stack(void)
#ifdef CONFIG_FRAME_POINTER
if (!bp)
- asm("movl %%ebp, %0" : "=r" (bp):);
+ get_bp(bp);
#endif
printk("Pid: %d, comm: %.20s %s %s %.*s\n",
@@ -237,8 +218,7 @@ void dump_stack(void)
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
-
- show_trace(current, NULL, &stack, bp);
+ show_trace(NULL, NULL, &stack, bp);
}
EXPORT_SYMBOL(dump_stack);
@@ -250,7 +230,7 @@ void show_registers(struct pt_regs *regs)
print_modules();
__show_regs(regs, 0);
- printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
+ printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
TASK_COMM_LEN, current->comm, task_pid_nr(current),
current_thread_info(), current, task_thread_info(current));
/*
@@ -263,14 +243,15 @@ void show_registers(struct pt_regs *regs)
unsigned char c;
u8 *ip;
- printk("\n" KERN_EMERG "Stack: ");
- show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG);
+ printk(KERN_EMERG "Stack:\n");
+ show_stack_log_lvl(NULL, regs, ®s->sp,
+ 0, KERN_EMERG);
printk(KERN_EMERG "Code: ");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
- /* try starting at EIP */
+ /* try starting at IP */
ip = (u8 *)regs->ip;
code_len = code_len - code_prologue + 1;
}
@@ -338,13 +319,10 @@ void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
if (kexec_should_crash(current))
crash_kexec(regs);
-
if (in_interrupt())
panic("Fatal exception in interrupt");
-
if (panic_on_oops)
panic("Fatal exception");
-
oops_exit();
do_exit(signr);
}
@@ -403,13 +381,60 @@ void die(const char *str, struct pt_regs *regs, long err)
oops_end(flags, regs, SIGSEGV);
}
+static DEFINE_SPINLOCK(nmi_print_lock);
+
+void notrace __kprobes
+die_nmi(char *str, struct pt_regs *regs, int do_panic)
+{
+ if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
+ return;
+
+ spin_lock(&nmi_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out:
+ */
+ bust_spinlocks(1);
+ printk(KERN_EMERG "%s", str);
+ printk(" on CPU%d, ip %08lx, registers:\n",
+ smp_processor_id(), regs->ip);
+ show_registers(regs);
+ if (do_panic)
+ panic("Non maskable interrupt");
+ console_silent();
+ spin_unlock(&nmi_print_lock);
+ bust_spinlocks(0);
+
+ /*
+ * If we are in kernel we are probably nested up pretty bad
+ * and might aswell get out now while we still can:
+ */
+ if (!user_mode_vm(regs)) {
+ current->thread.trap_no = 2;
+ crash_kexec(regs);
+ }
+
+ do_exit(SIGSEGV);
+}
+
+static int __init oops_setup(char *s)
+{
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "panic"))
+ panic_on_oops = 1;
+ return 0;
+}
+early_param("oops", oops_setup);
+
static int __init kstack_setup(char *s)
{
+ if (!s)
+ return -EINVAL;
kstack_depth_to_print = simple_strtoul(s, NULL, 0);
-
- return 1;
+ return 0;
}
-__setup("kstack=", kstack_setup);
+early_param("kstack", kstack_setup);
static int __init code_bytes_setup(char *s)
{
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 6f15050..086cc81 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -16,15 +16,18 @@
#include <asm/stacktrace.h>
+#define STACKSLOTS_PER_LINE 4
+#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
+
int panic_on_unrecovered_nmi;
-int kstack_depth_to_print = 12;
+int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static unsigned int code_bytes = 64;
static int die_counter;
void printk_address(unsigned long address, int reliable)
{
- printk(" [<%016lx>] %s%pS\n",
- address, reliable ? "" : "? ", (void *) address);
+ printk(" [<%p>] %s%pS\n", (void *) address,
+ reliable ? "" : "? ", (void *) address);
}
static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
@@ -141,7 +144,7 @@ print_context_stack(struct thread_info *tinfo,
addr = *stack;
if (__kernel_text_address(addr)) {
- if ((unsigned long) stack == bp + 8) {
+ if ((unsigned long) stack == bp + sizeof(long)) {
ops->address(data, addr, 1);
frame = frame->next_frame;
bp = (unsigned long) frame;
@@ -177,7 +180,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
if (!bp) {
if (task == current) {
/* Grab bp right from our regs */
- asm("movq %%rbp, %0" : "=r" (bp) : );
+ get_bp(bp);
} else {
/* bp is the last reg pushed by switch_to */
bp = *(unsigned long *) task->thread.sp;
@@ -247,24 +250,29 @@ EXPORT_SYMBOL(dump_trace);
static void
print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
{
+ printk(data);
print_symbol(msg, symbol);
printk("\n");
}
static void print_trace_warning(void *data, char *msg)
{
- printk("%s\n", msg);
+ printk("%s%s\n", (char *)data, msg);
}
static int print_trace_stack(void *data, char *name)
{
- printk(" <%s> ", name);
+ printk("%s <%s> ", (char *)data, name);
return 0;
}
+/*
+ * Print one address/symbol entries per line.
+ */
static void print_trace_address(void *data, unsigned long addr, int reliable)
{
touch_nmi_watchdog();
+ printk(data);
printk_address(addr, reliable);
}
@@ -279,7 +287,7 @@ static void
show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp, char *log_lvl)
{
- printk("Call Trace:\n");
+ printk("%sCall Trace:\n", log_lvl);
dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
}
@@ -324,8 +332,8 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
if (((long) stack & (THREAD_SIZE-1)) == 0)
break;
}
- if (i && ((i % 4) == 0))
- printk("\n");
+ if (i && ((i % STACKSLOTS_PER_LINE) == 0))
+ printk("\n%s", log_lvl);
printk(" %016lx", *stack++);
touch_nmi_watchdog();
}
@@ -348,7 +356,7 @@ void dump_stack(void)
#ifdef CONFIG_FRAME_POINTER
if (!bp)
- asm("movq %%rbp, %0" : "=r" (bp) : );
+ get_bp(bp);
#endif
printk("Pid: %d, comm: %.20s %s %s %.*s\n",
@@ -383,15 +391,15 @@ void show_registers(struct pt_regs *regs)
unsigned char c;
u8 *ip;
- printk("Stack: ");
+ printk(KERN_EMERG "Stack:\n");
show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
- regs->bp, "");
+ regs->bp, KERN_EMERG);
printk(KERN_EMERG "Code: ");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
- /* try starting at RIP */
+ /* try starting at IP */
ip = (u8 *)regs->ip;
code_len = code_len - code_prologue + 1;
}
@@ -470,7 +478,7 @@ void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
int __kprobes __die(const char *str, struct pt_regs *regs, long err)
{
- printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff, ++die_counter);
+ printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
#endif
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index ff9e735..02fc5b4 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -3,11 +3,19 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/screen_info.h>
+#include <linux/usb/ch9.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/errno.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/fcntl.h>
#include <asm/setup.h>
#include <xen/hvc-console.h>
+#include <asm/pci-direct.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <linux/usb/ehci_def.h>
/* Simple VGA output */
#define VGABASE (__ISA_IO_base + 0xb8000)
@@ -78,6 +86,7 @@ static int early_serial_base = 0x3f8; /* ttyS0 */
static int early_serial_putc(unsigned char ch)
{
unsigned timeout = 0xffff;
+
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
outb(ch, early_serial_base + TXR);
@@ -111,7 +120,7 @@ static __init void early_serial_init(char *s)
if (!strncmp(s, "0x", 2)) {
early_serial_base = simple_strtoul(s, &e, 16);
} else {
- static int bases[] = { 0x3f8, 0x2f8 };
+ static const int __initconst bases[] = { 0x3f8, 0x2f8 };
if (!strncmp(s, "ttyS", 4))
s += 4;
@@ -151,6 +160,721 @@ static struct console early_serial_console = {
.index = -1,
};
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static unsigned int dbgp_endpoint_out;
+
+struct ehci_dev {
+ u32 bus;
+ u32 slot;
+ u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_DATA_TOGGLE 0x8800
+
+static inline u32 dbgp_pid_update(u32 x, u32 tok)
+{
+ return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
+}
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+ return (x & ~0x0f) | (len & 0x0f);
+}
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT 0xe1
+#define USB_PID_IN 0x69
+#define USB_PID_SOF 0xa5
+#define USB_PID_SETUP 0x2d
+/* handshake */
+#define USB_PID_ACK 0xd2
+#define USB_PID_NAK 0x5a
+#define USB_PID_STALL 0x1e
+#define USB_PID_NYET 0x96
+/* data */
+#define USB_PID_DATA0 0xc3
+#define USB_PID_DATA1 0x4b
+#define USB_PID_DATA2 0x87
+#define USB_PID_MDATA 0x0f
+/* Special */
+#define USB_PID_PREAMBLE 0x3c
+#define USB_PID_ERR 0x3c
+#define USB_PID_SPLIT 0x78
+#define USB_PID_PING 0xb4
+#define USB_PID_UNDEF_0 0xf0
+
+#define USB_PID_DATA_TOGGLE 0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG 0xa
+
+#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
+#define HUB_SHORT_RESET_TIME 10
+#define HUB_LONG_RESET_TIME 200
+#define HUB_RESET_TIMEOUT 500
+
+#define DBGP_MAX_PACKET 8
+
+static int dbgp_wait_until_complete(void)
+{
+ u32 ctrl;
+ int loop = 0x100000;
+
+ do {
+ ctrl = readl(&ehci_debug->control);
+ /* Stop when the transaction is finished */
+ if (ctrl & DBGP_DONE)
+ break;
+ } while (--loop > 0);
+
+ if (!loop)
+ return -1;
+
+ /*
+ * Now that we have observed the completed transaction,
+ * clear the done bit.
+ */
+ writel(ctrl | DBGP_DONE, &ehci_debug->control);
+ return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static void dbgp_mdelay(int ms)
+{
+ int i;
+
+ while (ms--) {
+ for (i = 0; i < 1000; i++)
+ outb(0x1, 0x80);
+ }
+}
+
+static void dbgp_breath(void)
+{
+ /* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl)
+{
+ u32 pids, lpid;
+ int ret;
+ int loop = 3;
+
+retry:
+ writel(ctrl | DBGP_GO, &ehci_debug->control);
+ ret = dbgp_wait_until_complete();
+ pids = readl(&ehci_debug->pids);
+ lpid = DBGP_PID_GET(pids);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If the port is getting full or it has dropped data
+ * start pacing ourselves, not necessary but it's friendly.
+ */
+ if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+ dbgp_breath();
+
+ /* If I get a NACK reissue the transmission */
+ if (lpid == USB_PID_NAK) {
+ if (--loop > 0)
+ goto retry;
+ }
+
+ return ret;
+}
+
+static void dbgp_set_data(const void *buf, int size)
+{
+ const unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = hi = 0;
+ for (i = 0; i < 4 && i < size; i++)
+ lo |= bytes[i] << (8*i);
+ for (; i < 8 && i < size; i++)
+ hi |= bytes[i] << (8*(i - 4));
+ writel(lo, &ehci_debug->data03);
+ writel(hi, &ehci_debug->data47);
+}
+
+static void dbgp_get_data(void *buf, int size)
+{
+ unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = readl(&ehci_debug->data03);
+ hi = readl(&ehci_debug->data47);
+ for (i = 0; i < 4 && i < size; i++)
+ bytes[i] = (lo >> (8*i)) & 0xff;
+ for (; i < 8 && i < size; i++)
+ bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+ const char *bytes, int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(devnum, endpoint);
+
+ pids = readl(&ehci_debug->pids);
+ pids = dbgp_pid_update(pids, USB_PID_OUT);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, size);
+ ctrl |= DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ dbgp_set_data(bytes, size);
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+ int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(devnum, endpoint);
+
+ pids = readl(&ehci_debug->pids);
+ pids = dbgp_pid_update(pids, USB_PID_IN);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, size);
+ ctrl &= ~DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ if (size > ret)
+ size = ret;
+ dbgp_get_data(data, size);
+ return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype, int request,
+ int value, int index, void *data, int size)
+{
+ u32 pids, addr, ctrl;
+ struct usb_ctrlrequest req;
+ int read;
+ int ret;
+
+ read = (requesttype & USB_DIR_IN) != 0;
+ if (size > (read ? DBGP_MAX_PACKET:0))
+ return -1;
+
+ /* Compute the control message */
+ req.bRequestType = requesttype;
+ req.bRequest = request;
+ req.wValue = cpu_to_le16(value);
+ req.wIndex = cpu_to_le16(index);
+ req.wLength = cpu_to_le16(size);
+
+ pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+ addr = DBGP_EPADDR(devnum, 0);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, sizeof(req));
+ ctrl |= DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ /* Send the setup message */
+ dbgp_set_data(&req, sizeof(req));
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ /* Read the result */
+ return dbgp_bulk_read(devnum, 0, data, size);
+}
+
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+ u8 pos;
+ int bytes;
+
+ if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+ PCI_STATUS_CAP_LIST))
+ return 0;
+
+ pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+ for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+ u8 id;
+
+ pos &= ~3;
+ id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+
+ pos = read_pci_config_byte(num, slot, func,
+ pos+PCI_CAP_LIST_NEXT);
+ }
+ return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+ u32 class;
+
+ class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+ if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+ return 0;
+
+ return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+ u32 bus, slot, func;
+
+ for (bus = 0; bus < 256; bus++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ unsigned cap;
+
+ cap = __find_dbgp(bus, slot, func);
+
+ if (!cap)
+ continue;
+ if (ehci_num-- != 0)
+ continue;
+ *rbus = bus;
+ *rslot = slot;
+ *rfunc = func;
+ return cap;
+ }
+ }
+ }
+ return 0;
+}
+
+static int ehci_reset_port(int port)
+{
+ u32 portsc;
+ u32 delay_time, delay;
+ int loop;
+
+ /* Reset the usb debug port */
+ portsc = readl(&ehci_regs->port_status[port - 1]);
+ portsc &= ~PORT_PE;
+ portsc |= PORT_RESET;
+ writel(portsc, &ehci_regs->port_status[port - 1]);
+
+ delay = HUB_ROOT_RESET_TIME;
+ for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+ delay_time += delay) {
+ dbgp_mdelay(delay);
+
+ portsc = readl(&ehci_regs->port_status[port - 1]);
+ if (portsc & PORT_RESET) {
+ /* force reset to complete */
+ loop = 2;
+ writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+ &ehci_regs->port_status[port - 1]);
+ do {
+ portsc = readl(&ehci_regs->port_status[port-1]);
+ } while ((portsc & PORT_RESET) && (--loop > 0));
+ }
+
+ /* Device went away? */
+ if (!(portsc & PORT_CONNECT))
+ return -ENOTCONN;
+
+ /* bomb out completely if something weird happend */
+ if ((portsc & PORT_CSC))
+ return -EINVAL;
+
+ /* If we've finished resetting, then break out of the loop */
+ if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+ return 0;
+ }
+ return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+ u32 status;
+ int ret, reps;
+
+ for (reps = 0; reps < 3; reps++) {
+ dbgp_mdelay(100);
+ status = readl(&ehci_regs->status);
+ if (status & STS_PCD) {
+ ret = ehci_reset_port(port);
+ if (ret == 0)
+ return 0;
+ }
+ }
+ return -ENOTCONN;
+}
+
+#ifdef DBGP_DEBUG
+# define dbgp_printk early_printk
+#else
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+typedef void (*set_debug_port_t)(int port);
+
+static void default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t set_debug_port = default_set_debug_port;
+
+static void nvidia_set_debug_port(int port)
+{
+ u32 dword;
+ dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+ 0x74);
+ dword &= ~(0x0f<<12);
+ dword |= ((port & 0x0f)<<12);
+ write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+ dword);
+ dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+ u32 vendorid;
+
+ vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+ 0x00);
+
+ if ((vendorid & 0xffff) == 0x10de) {
+ dbgp_printk("using nvidia set_debug_port\n");
+ set_debug_port = nvidia_set_debug_port;
+ }
+}
+
+static int __init ehci_setup(void)
+{
+ struct usb_debug_descriptor dbgp_desc;
+ u32 cmd, ctrl, status, portsc, hcs_params;
+ u32 debug_port, new_debug_port = 0, n_ports;
+ u32 devnum;
+ int ret, i;
+ int loop;
+ int port_map_tried;
+ int playtimes = 3;
+
+try_next_time:
+ port_map_tried = 0;
+
+try_next_port:
+
+ hcs_params = readl(&ehci_caps->hcs_params);
+ debug_port = HCS_DEBUG_PORT(hcs_params);
+ n_ports = HCS_N_PORTS(hcs_params);
+
+ dbgp_printk("debug_port: %d\n", debug_port);
+ dbgp_printk("n_ports: %d\n", n_ports);
+
+ for (i = 1; i <= n_ports; i++) {
+ portsc = readl(&ehci_regs->port_status[i-1]);
+ dbgp_printk("portstatus%d: %08x\n", i, portsc);
+ }
+
+ if (port_map_tried && (new_debug_port != debug_port)) {
+ if (--playtimes) {
+ set_debug_port(new_debug_port);
+ goto try_next_time;
+ }
+ return -1;
+ }
+
+ loop = 10;
+ /* Reset the EHCI controller */
+ cmd = readl(&ehci_regs->command);
+ cmd |= CMD_RESET;
+ writel(cmd, &ehci_regs->command);
+ do {
+ cmd = readl(&ehci_regs->command);
+ } while ((cmd & CMD_RESET) && (--loop > 0));
+
+ if (!loop) {
+ dbgp_printk("can not reset ehci\n");
+ return -1;
+ }
+ dbgp_printk("ehci reset done\n");
+
+ /* Claim ownership, but do not enable yet */
+ ctrl = readl(&ehci_debug->control);
+ ctrl |= DBGP_OWNER;
+ ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+ writel(ctrl, &ehci_debug->control);
+
+ /* Start the ehci running */
+ cmd = readl(&ehci_regs->command);
+ cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+ cmd |= CMD_RUN;
+ writel(cmd, &ehci_regs->command);
+
+ /* Ensure everything is routed to the EHCI */
+ writel(FLAG_CF, &ehci_regs->configured_flag);
+
+ /* Wait until the controller is no longer halted */
+ loop = 10;
+ do {
+ status = readl(&ehci_regs->status);
+ } while ((status & STS_HALT) && (--loop > 0));
+
+ if (!loop) {
+ dbgp_printk("ehci can be started\n");
+ return -1;
+ }
+ dbgp_printk("ehci started\n");
+
+ /* Wait for a device to show up in the debug port */
+ ret = ehci_wait_for_port(debug_port);
+ if (ret < 0) {
+ dbgp_printk("No device found in debug port\n");
+ goto next_debug_port;
+ }
+ dbgp_printk("ehci wait for port done\n");
+
+ /* Enable the debug port */
+ ctrl = readl(&ehci_debug->control);
+ ctrl |= DBGP_CLAIM;
+ writel(ctrl, &ehci_debug->control);
+ ctrl = readl(&ehci_debug->control);
+ if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+ dbgp_printk("No device in debug port\n");
+ writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+ goto err;
+ }
+ dbgp_printk("debug ported enabled\n");
+
+ /* Completely transfer the debug device to the debug controller */
+ portsc = readl(&ehci_regs->port_status[debug_port - 1]);
+ portsc &= ~PORT_PE;
+ writel(portsc, &ehci_regs->port_status[debug_port - 1]);
+
+ dbgp_mdelay(100);
+
+ /* Find the debug device and make it device number 127 */
+ for (devnum = 0; devnum <= 127; devnum++) {
+ ret = dbgp_control_msg(devnum,
+ USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+ &dbgp_desc, sizeof(dbgp_desc));
+ if (ret > 0)
+ break;
+ }
+ if (devnum > 127) {
+ dbgp_printk("Could not find attached debug device\n");
+ goto err;
+ }
+ if (ret < 0) {
+ dbgp_printk("Attached device is not a debug device\n");
+ goto err;
+ }
+ dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+
+ /* Move the device to 127 if it isn't already there */
+ if (devnum != USB_DEBUG_DEVNUM) {
+ ret = dbgp_control_msg(devnum,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+ if (ret < 0) {
+ dbgp_printk("Could not move attached device to %d\n",
+ USB_DEBUG_DEVNUM);
+ goto err;
+ }
+ devnum = USB_DEBUG_DEVNUM;
+ dbgp_printk("debug device renamed to 127\n");
+ }
+
+ /* Enable the debug interface */
+ ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+ if (ret < 0) {
+ dbgp_printk(" Could not enable the debug device\n");
+ goto err;
+ }
+ dbgp_printk("debug interface enabled\n");
+
+ /* Perform a small write to get the even/odd data state in sync
+ */
+ ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+ if (ret < 0) {
+ dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+ goto err;
+ }
+ dbgp_printk("small write doned\n");
+
+ return 0;
+err:
+ /* Things didn't work so remove my claim */
+ ctrl = readl(&ehci_debug->control);
+ ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+ writel(ctrl, &ehci_debug->control);
+ return -1;
+
+next_debug_port:
+ port_map_tried |= (1<<(debug_port - 1));
+ new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+ if (port_map_tried != ((1<<n_ports) - 1)) {
+ set_debug_port(new_debug_port);
+ goto try_next_port;
+ }
+ if (--playtimes) {
+ set_debug_port(new_debug_port);
+ goto try_next_time;
+ }
+
+ return -1;
+}
+
+static int __init early_dbgp_init(char *s)
+{
+ u32 debug_port, bar, offset;
+ u32 bus, slot, func, cap;
+ void __iomem *ehci_bar;
+ u32 dbgp_num;
+ u32 bar_val;
+ char *e;
+ int ret;
+ u8 byte;
+
+ if (!early_pci_allowed())
+ return -1;
+
+ dbgp_num = 0;
+ if (*s)
+ dbgp_num = simple_strtoul(s, &e, 10);
+ dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+ cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+ if (!cap)
+ return -1;
+
+ dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+ func);
+
+ debug_port = read_pci_config(bus, slot, func, cap);
+ bar = (debug_port >> 29) & 0x7;
+ bar = (bar * 4) + 0xc;
+ offset = (debug_port >> 16) & 0xfff;
+ dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+ if (bar != PCI_BASE_ADDRESS_0) {
+ dbgp_printk("only debug ports on bar 1 handled.\n");
+
+ return -1;
+ }
+
+ bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+ dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+ if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+ dbgp_printk("only simple 32bit mmio bars supported\n");
+
+ return -1;
+ }
+
+ /* double check if the mem space is enabled */
+ byte = read_pci_config_byte(bus, slot, func, 0x04);
+ if (!(byte & 0x2)) {
+ byte |= 0x02;
+ write_pci_config_byte(bus, slot, func, 0x04, byte);
+ dbgp_printk("mmio for ehci enabled\n");
+ }
+
+ /*
+ * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+ * than enough. 1K is the biggest I have seen.
+ */
+ set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+ ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+ ehci_bar += bar_val & ~PAGE_MASK;
+ dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+ ehci_caps = ehci_bar;
+ ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
+ ehci_debug = ehci_bar + offset;
+ ehci_dev.bus = bus;
+ ehci_dev.slot = slot;
+ ehci_dev.func = func;
+
+ detect_set_debug_port();
+
+ ret = ehci_setup();
+ if (ret < 0) {
+ dbgp_printk("ehci_setup failed\n");
+ ehci_debug = NULL;
+
+ return -1;
+ }
+
+ return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+ int chunk, ret;
+
+ if (!ehci_debug)
+ return;
+ while (n > 0) {
+ chunk = n;
+ if (chunk > DBGP_MAX_PACKET)
+ chunk = DBGP_MAX_PACKET;
+ ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
+ dbgp_endpoint_out, str, chunk);
+ str += chunk;
+ n -= chunk;
+ }
+}
+
+static struct console early_dbgp_console = {
+ .name = "earlydbg",
+ .write = early_dbgp_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+#endif
+
/* Console interface to a host file on AMD's SimNow! */
static int simnow_fd;
@@ -165,6 +889,7 @@ enum {
static noinline long simnow(long cmd, long a, long b, long c)
{
long ret;
+
asm volatile("cpuid" :
"=a" (ret) :
"b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
@@ -174,6 +899,7 @@ static noinline long simnow(long cmd, long a, long b, long c)
static void __init simnow_init(char *str)
{
char *fn = "klog";
+
if (*str == '=')
fn = ++str;
/* error ignored */
@@ -194,7 +920,7 @@ static struct console simnow_console = {
/* Direct interface for emergencies */
static struct console *early_console = &early_vga_console;
-static int early_console_initialized;
+static int __initdata early_console_initialized;
asmlinkage void early_printk(const char *fmt, ...)
{
@@ -208,10 +934,11 @@ asmlinkage void early_printk(const char *fmt, ...)
va_end(ap);
}
-static int __initdata keep_early;
static int __init setup_early_printk(char *buf)
{
+ int keep_early;
+
if (!buf)
return 0;
@@ -219,8 +946,7 @@ static int __init setup_early_printk(char *buf)
return 0;
early_console_initialized = 1;
- if (strstr(buf, "keep"))
- keep_early = 1;
+ keep_early = (strstr(buf, "keep") != NULL);
if (!strncmp(buf, "serial", 6)) {
early_serial_init(buf + 6);
@@ -238,6 +964,17 @@ static int __init setup_early_printk(char *buf)
simnow_init(buf + 6);
early_console = &simnow_console;
keep_early = 1;
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+ } else if (!strncmp(buf, "dbgp", 4)) {
+ if (early_dbgp_init(buf+4) < 0)
+ return 0;
+ early_console = &early_dbgp_console;
+ /*
+ * usb subsys will reset ehci controller, so don't keep
+ * that early console
+ */
+ keep_early = 0;
+#endif
#ifdef CONFIG_HVC_XEN
} else if (!strncmp(buf, "xen", 3)) {
early_console = &xenboot_console;
@@ -251,4 +988,23 @@ static int __init setup_early_printk(char *buf)
register_console(early_console);
return 0;
}
+
+static void __init enable_debug_console(char *buf)
+{
+#ifdef DBGP_DEBUG
+ struct console *old_early_console = NULL;
+
+ if (early_console_initialized && early_console) {
+ old_early_console = early_console;
+ unregister_console(early_console);
+ early_console_initialized = 0;
+ }
+
+ setup_early_printk(buf);
+
+ if (early_console == old_early_console && old_early_console)
+ register_console(old_early_console);
+#endif
+}
+
early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 104fa65..1db6ce4 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -667,6 +667,13 @@ END(stub_rt_sigreturn)
SAVE_ARGS
leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler
pushq %rbp
+ /*
+ * Save rbp twice: One is for marking the stack frame, as usual, and the
+ * other, to fill pt_regs properly. This is because bx comes right
+ * before the last saved register in that structure, and not bp. If the
+ * base pointer were in the place bx is today, this would not be needed.
+ */
+ movq %rbp, -8(%rsp)
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rbp, 0
movq %rsp,%rbp
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 2f4d009..d17fbc2 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -135,7 +135,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
};
-static void __init init_ISA_irqs (void)
+void __init init_ISA_irqs(void)
{
int i;
@@ -160,22 +160,8 @@ static void __init init_ISA_irqs (void)
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-void __init native_init_IRQ(void)
+static void __init smp_intr_init(void)
{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
#ifdef CONFIG_SMP
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
@@ -203,6 +189,12 @@ void __init native_init_IRQ(void)
/* Low priority IPI to cleanup after moving an irq */
set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
#endif
+}
+
+static void __init apic_intr_init(void)
+{
+ smp_intr_init();
+
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
@@ -212,6 +204,25 @@ void __init native_init_IRQ(void)
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+}
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ init_ISA_irqs();
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (vector != IA32_SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+ apic_intr_init();
if (!acpi_ioapic)
setup_irq(2, &irq2);
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
deleted file mode 100644
index 652fa5c..0000000
--- a/arch/x86/kernel/microcode.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Intel CPU Microcode Update Driver for Linux
- *
- * Copyright (C) 2000-2006 Tigran Aivazian <tigran@...azian.fsnet.co.uk>
- * 2006 Shaohua Li <shaohua.li@...el.com>
- *
- * This driver allows to upgrade microcode on Intel processors
- * belonging to IA-32 family - PentiumPro, Pentium II,
- * Pentium III, Xeon, Pentium 4, etc.
- *
- * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
- * Software Developer's Manual
- * Order Number 253668 or free download from:
- *
- * http://developer.intel.com/design/pentium4/manuals/253668.htm
- *
- * For more information, go to http://www.urbanmyth.org/microcode
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * 1.0 16 Feb 2000, Tigran Aivazian <tigran@....com>
- * Initial release.
- * 1.01 18 Feb 2000, Tigran Aivazian <tigran@....com>
- * Added read() support + cleanups.
- * 1.02 21 Feb 2000, Tigran Aivazian <tigran@....com>
- * Added 'device trimming' support. open(O_WRONLY) zeroes
- * and frees the saved copy of applied microcode.
- * 1.03 29 Feb 2000, Tigran Aivazian <tigran@....com>
- * Made to use devfs (/dev/cpu/microcode) + cleanups.
- * 1.04 06 Jun 2000, Simon Trimmer <simon@...itas.com>
- * Added misc device support (now uses both devfs and misc).
- * Added MICROCODE_IOCFREE ioctl to clear memory.
- * 1.05 09 Jun 2000, Simon Trimmer <simon@...itas.com>
- * Messages for error cases (non Intel & no suitable microcode).
- * 1.06 03 Aug 2000, Tigran Aivazian <tigran@...itas.com>
- * Removed ->release(). Removed exclusive open and status bitmap.
- * Added microcode_rwsem to serialize read()/write()/ioctl().
- * Removed global kernel lock usage.
- * 1.07 07 Sep 2000, Tigran Aivazian <tigran@...itas.com>
- * Write 0 to 0x8B msr and then cpuid before reading revision,
- * so that it works even if there were no update done by the
- * BIOS. Otherwise, reading from 0x8B gives junk (which happened
- * to be 0 on my machine which is why it worked even when I
- * disabled update by the BIOS)
- * Thanks to Eric W. Biederman <ebiederman@...i.com> for the fix.
- * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@...el.com> and
- * Tigran Aivazian <tigran@...itas.com>
- * Intel Pentium 4 processor support and bugfixes.
- * 1.09 30 Oct 2001, Tigran Aivazian <tigran@...itas.com>
- * Bugfix for HT (Hyper-Threading) enabled processors
- * whereby processor resources are shared by all logical processors
- * in a single CPU package.
- * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@...el.com> and
- * Tigran Aivazian <tigran@...itas.com>,
- * Serialize updates as required on HT processors due to speculative
- * nature of implementation.
- * 1.11 22 Mar 2002 Tigran Aivazian <tigran@...itas.com>
- * Fix the panic when writing zero-length microcode chunk.
- * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@...el.com>,
- * Jun Nakajima <jun.nakajima@...el.com>
- * Support for the microcode updates in the new format.
- * 1.13 10 Oct 2003 Tigran Aivazian <tigran@...itas.com>
- * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- * because we no longer hold a copy of applied microcode
- * in kernel memory.
- * 1.14 25 Jun 2004 Tigran Aivazian <tigran@...itas.com>
- * Fix sigmatch() macro to handle old CPUs with pf == 0.
- * Thanks to Stuart Swales for pointing out this bug.
- */
-
-//#define DEBUG /* pr_debug */
-#include <linux/capability.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/mutex.h>
-#include <linux/cpu.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <asm/msr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
-MODULE_AUTHOR("Tigran Aivazian <tigran@...azian.fsnet.co.uk>");
-MODULE_LICENSE("GPL");
-
-#define MICROCODE_VERSION "1.14a"
-
-#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */
-#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
-#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */
-#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */
-#define DWSIZE (sizeof (u32))
-#define get_totalsize(mc) \
- (((microcode_t *)mc)->hdr.totalsize ? \
- ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
-#define get_datasize(mc) \
- (((microcode_t *)mc)->hdr.datasize ? \
- ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
- (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-static DEFINE_MUTEX(microcode_mutex);
-
-static struct ucode_cpu_info {
- int valid;
- unsigned int sig;
- unsigned int pf;
- unsigned int rev;
- microcode_t *mc;
-} ucode_cpu_info[NR_CPUS];
-
-static void collect_cpu_info(int cpu_num)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu_num);
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
- unsigned int val[2];
-
- /* We should bind the task to the CPU */
- BUG_ON(raw_smp_processor_id() != cpu_num);
- uci->pf = uci->rev = 0;
- uci->mc = NULL;
- uci->valid = 1;
-
- if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
- cpu_has(c, X86_FEATURE_IA64)) {
- printk(KERN_ERR "microcode: CPU%d not a capable Intel "
- "processor\n", cpu_num);
- uci->valid = 0;
- return;
- }
-
- uci->sig = cpuid_eax(0x00000001);
-
- if ((c->x86_model >= 5) || (c->x86 > 6)) {
- /* get processor flags from MSR 0x17 */
- rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
- uci->pf = 1 << ((val[1] >> 18) & 7);
- }
-
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
- pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
- uci->sig, uci->pf, uci->rev);
-}
-
-static inline int microcode_update_match(int cpu_num,
- microcode_header_t *mc_header, int sig, int pf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- if (!sigmatch(sig, uci->sig, pf, uci->pf)
- || mc_header->rev <= uci->rev)
- return 0;
- return 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
- microcode_header_t *mc_header = mc;
- struct extended_sigtable *ext_header = NULL;
- struct extended_signature *ext_sig;
- unsigned long total_size, data_size, ext_table_size;
- int sum, orig_sum, ext_sigcount = 0, i;
-
- total_size = get_totalsize(mc_header);
- data_size = get_datasize(mc_header);
- if (data_size + MC_HEADER_SIZE > total_size) {
- printk(KERN_ERR "microcode: error! "
- "Bad data size in microcode data file\n");
- return -EINVAL;
- }
-
- if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
- printk(KERN_ERR "microcode: error! "
- "Unknown microcode update format\n");
- return -EINVAL;
- }
- ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
- if (ext_table_size) {
- if ((ext_table_size < EXT_HEADER_SIZE)
- || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
- printk(KERN_ERR "microcode: error! "
- "Small exttable size in microcode data file\n");
- return -EINVAL;
- }
- ext_header = mc + MC_HEADER_SIZE + data_size;
- if (ext_table_size != exttable_size(ext_header)) {
- printk(KERN_ERR "microcode: error! "
- "Bad exttable size in microcode data file\n");
- return -EFAULT;
- }
- ext_sigcount = ext_header->count;
- }
-
- /* check extended table checksum */
- if (ext_table_size) {
- int ext_table_sum = 0;
- int *ext_tablep = (int *)ext_header;
-
- i = ext_table_size / DWSIZE;
- while (i--)
- ext_table_sum += ext_tablep[i];
- if (ext_table_sum) {
- printk(KERN_WARNING "microcode: aborting, "
- "bad extended signature table checksum\n");
- return -EINVAL;
- }
- }
-
- /* calculate the checksum */
- orig_sum = 0;
- i = (MC_HEADER_SIZE + data_size) / DWSIZE;
- while (i--)
- orig_sum += ((int *)mc)[i];
- if (orig_sum) {
- printk(KERN_ERR "microcode: aborting, bad checksum\n");
- return -EINVAL;
- }
- if (!ext_table_size)
- return 0;
- /* check extended signature checksum */
- for (i = 0; i < ext_sigcount; i++) {
- ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
- EXT_SIGNATURE_SIZE * i;
- sum = orig_sum
- - (mc_header->sig + mc_header->pf + mc_header->cksum)
- + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
- if (sum) {
- printk(KERN_ERR "microcode: aborting, bad checksum\n");
- return -EINVAL;
- }
- }
- return 0;
-}
-
-/*
- * return 0 - no update found
- * return 1 - found update
- * return < 0 - error
- */
-static int get_maching_microcode(void *mc, int cpu)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- microcode_header_t *mc_header = mc;
- struct extended_sigtable *ext_header;
- unsigned long total_size = get_totalsize(mc_header);
- int ext_sigcount, i;
- struct extended_signature *ext_sig;
- void *new_mc;
-
- if (microcode_update_match(cpu, mc_header,
- mc_header->sig, mc_header->pf))
- goto find;
-
- if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
- return 0;
-
- ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
- ext_sigcount = ext_header->count;
- ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
- for (i = 0; i < ext_sigcount; i++) {
- if (microcode_update_match(cpu, mc_header,
- ext_sig->sig, ext_sig->pf))
- goto find;
- ext_sig++;
- }
- return 0;
-find:
- pr_debug("microcode: CPU%d found a matching microcode update with"
- " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
- new_mc = vmalloc(total_size);
- if (!new_mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
- }
-
- /* free previous update file */
- vfree(uci->mc);
-
- memcpy(new_mc, mc, total_size);
- uci->mc = new_mc;
- return 1;
-}
-
-static void apply_microcode(int cpu)
-{
- unsigned long flags;
- unsigned int val[2];
- int cpu_num = raw_smp_processor_id();
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu_num != cpu);
-
- if (uci->mc == NULL)
- return;
-
- /* serialize access to the physical write to MSR 0x79 */
- spin_lock_irqsave(µcode_update_lock, flags);
-
- /* write microcode via MSR 0x79 */
- wrmsr(MSR_IA32_UCODE_WRITE,
- (unsigned long) uci->mc->bits,
- (unsigned long) uci->mc->bits >> 16 >> 16);
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
-
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
- spin_unlock_irqrestore(µcode_update_lock, flags);
- if (val[1] != uci->mc->hdr.rev) {
- printk(KERN_ERR "microcode: CPU%d update from revision "
- "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
- return;
- }
- printk(KERN_INFO "microcode: CPU%d updated from revision "
- "0x%x to 0x%x, date = %08x \n",
- cpu_num, uci->rev, val[1], uci->mc->hdr.date);
- uci->rev = val[1];
-}
-
-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-static void __user *user_buffer; /* user area microcode data buffer */
-static unsigned int user_buffer_size; /* it's size */
-
-static long get_next_ucode(void **mc, long offset)
-{
- microcode_header_t mc_header;
- unsigned long total_size;
-
- /* No more data */
- if (offset >= user_buffer_size)
- return 0;
- if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- return -EFAULT;
- }
- total_size = get_totalsize(&mc_header);
- if (offset + total_size > user_buffer_size) {
- printk(KERN_ERR "microcode: error! Bad total size in microcode "
- "data file\n");
- return -EINVAL;
- }
- *mc = vmalloc(total_size);
- if (!*mc)
- return -ENOMEM;
- if (copy_from_user(*mc, user_buffer + offset, total_size)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- vfree(*mc);
- return -EFAULT;
- }
- return offset + total_size;
-}
-
-static int do_microcode_update (void)
-{
- long cursor = 0;
- int error = 0;
- void *new_mc = NULL;
- int cpu;
- cpumask_t old;
-
- old = current->cpus_allowed;
-
- while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
- error = microcode_sanity_check(new_mc);
- if (error)
- goto out;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- for_each_online_cpu(cpu) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- if (!uci->valid)
- continue;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = get_maching_microcode(new_mc, cpu);
- if (error < 0)
- goto out;
- if (error == 1)
- apply_microcode(cpu);
- }
- vfree(new_mc);
- }
-out:
- if (cursor > 0)
- vfree(new_mc);
- if (cursor < 0)
- error = cursor;
- set_cpus_allowed_ptr(current, &old);
- return error;
-}
-
-static int microcode_open (struct inode *unused1, struct file *unused2)
-{
- cycle_kernel_lock();
- return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
-}
-
-static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
- ssize_t ret;
-
- if ((len >> PAGE_SHIFT) > num_physpages) {
- printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
- return -EINVAL;
- }
-
- get_online_cpus();
- mutex_lock(µcode_mutex);
-
- user_buffer = (void __user *) buf;
- user_buffer_size = (int) len;
-
- ret = do_microcode_update();
- if (!ret)
- ret = (ssize_t)len;
-
- mutex_unlock(µcode_mutex);
- put_online_cpus();
-
- return ret;
-}
-
-static const struct file_operations microcode_fops = {
- .owner = THIS_MODULE,
- .write = microcode_write,
- .open = microcode_open,
-};
-
-static struct miscdevice microcode_dev = {
- .minor = MICROCODE_MINOR,
- .name = "microcode",
- .fops = µcode_fops,
-};
-
-static int __init microcode_dev_init (void)
-{
- int error;
-
- error = misc_register(µcode_dev);
- if (error) {
- printk(KERN_ERR
- "microcode: can't misc_register on minor=%d\n",
- MICROCODE_MINOR);
- return error;
- }
-
- return 0;
-}
-
-static void microcode_dev_exit (void)
-{
- misc_deregister(µcode_dev);
-}
-
-MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
-#else
-#define microcode_dev_init() 0
-#define microcode_dev_exit() do { } while(0)
-#endif
-
-static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
- unsigned long size, long offset)
-{
- microcode_header_t *mc_header;
- unsigned long total_size;
-
- /* No more data */
- if (offset >= size)
- return 0;
- mc_header = (microcode_header_t *)(buf + offset);
- total_size = get_totalsize(mc_header);
-
- if (offset + total_size > size) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- return -EINVAL;
- }
-
- *mc = vmalloc(total_size);
- if (!*mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
- }
- memcpy(*mc, buf + offset, total_size);
- return offset + total_size;
-}
-
-/* fake device for request_firmware */
-static struct platform_device *microcode_pdev;
-
-static int cpu_request_microcode(int cpu)
-{
- char name[30];
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- const struct firmware *firmware;
- const u8 *buf;
- unsigned long size;
- long offset = 0;
- int error;
- void *mc;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
- sprintf(name,"intel-ucode/%02x-%02x-%02x",
- c->x86, c->x86_model, c->x86_mask);
- error = request_firmware(&firmware, name, µcode_pdev->dev);
- if (error) {
- pr_debug("microcode: data file %s load failed\n", name);
- return error;
- }
- buf = firmware->data;
- size = firmware->size;
- while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
- > 0) {
- error = microcode_sanity_check(mc);
- if (error)
- break;
- error = get_maching_microcode(mc, cpu);
- if (error < 0)
- break;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- if (error == 1) {
- apply_microcode(cpu);
- error = 0;
- }
- vfree(mc);
- }
- if (offset > 0)
- vfree(mc);
- if (offset < 0)
- error = offset;
- release_firmware(firmware);
-
- return error;
-}
-
-static int apply_microcode_check_cpu(int cpu)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- cpumask_t old;
- unsigned int val[2];
- int err = 0;
-
- /* Check if the microcode is available */
- if (!uci->mc)
- return 0;
-
- old = current->cpus_allowed;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
- /* Check if the microcode we have in memory matches the CPU */
- if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
- cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
- err = -EINVAL;
-
- if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
- /* get processor flags from MSR 0x17 */
- rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
- if (uci->pf != (1 << ((val[1] >> 18) & 7)))
- err = -EINVAL;
- }
-
- if (!err) {
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
- if (uci->rev != val[1])
- err = -EINVAL;
- }
-
- if (!err)
- apply_microcode(cpu);
- else
- printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
- " sig=0x%x, pf=0x%x, rev=0x%x\n",
- cpu, uci->sig, uci->pf, uci->rev);
-
- set_cpus_allowed_ptr(current, &old);
- return err;
-}
-
-static void microcode_init_cpu(int cpu, int resume)
-{
- cpumask_t old;
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- old = current->cpus_allowed;
-
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- mutex_lock(µcode_mutex);
- collect_cpu_info(cpu);
- if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
- cpu_request_microcode(cpu);
- mutex_unlock(µcode_mutex);
- set_cpus_allowed_ptr(current, &old);
-}
-
-static void microcode_fini_cpu(int cpu)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- mutex_lock(µcode_mutex);
- uci->valid = 0;
- vfree(uci->mc);
- uci->mc = NULL;
- mutex_unlock(µcode_mutex);
-}
-
-static ssize_t reload_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
- const char *buf, size_t sz)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
- char *end;
- unsigned long val = simple_strtoul(buf, &end, 0);
- int err = 0;
- int cpu = dev->id;
-
- if (end == buf)
- return -EINVAL;
- if (val == 1) {
- cpumask_t old = current->cpus_allowed;
-
- get_online_cpus();
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
- mutex_lock(µcode_mutex);
- if (uci->valid)
- err = cpu_request_microcode(cpu);
- mutex_unlock(µcode_mutex);
- put_online_cpus();
- set_cpus_allowed_ptr(current, &old);
- }
- if (err)
- return err;
- return sz;
-}
-
-static ssize_t version_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
- return sprintf(buf, "0x%x\n", uci->rev);
-}
-
-static ssize_t pf_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
- return sprintf(buf, "0x%x\n", uci->pf);
-}
-
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
-
-static struct attribute *mc_default_attrs[] = {
- &attr_reload.attr,
- &attr_version.attr,
- &attr_processor_flags.attr,
- NULL
-};
-
-static struct attribute_group mc_attr_group = {
- .attrs = mc_default_attrs,
- .name = "microcode",
-};
-
-static int __mc_sysdev_add(struct sys_device *sys_dev, int resume)
-{
- int err, cpu = sys_dev->id;
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- if (!cpu_online(cpu))
- return 0;
-
- pr_debug("microcode: CPU%d added\n", cpu);
- memset(uci, 0, sizeof(*uci));
-
- err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
- if (err)
- return err;
-
- microcode_init_cpu(cpu, resume);
-
- return 0;
-}
-
-static int mc_sysdev_add(struct sys_device *sys_dev)
-{
- return __mc_sysdev_add(sys_dev, 0);
-}
-
-static int mc_sysdev_remove(struct sys_device *sys_dev)
-{
- int cpu = sys_dev->id;
-
- if (!cpu_online(cpu))
- return 0;
-
- pr_debug("microcode: CPU%d removed\n", cpu);
- microcode_fini_cpu(cpu);
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
- return 0;
-}
-
-static int mc_sysdev_resume(struct sys_device *dev)
-{
- int cpu = dev->id;
-
- if (!cpu_online(cpu))
- return 0;
- pr_debug("microcode: CPU%d resumed\n", cpu);
- /* only CPU 0 will apply ucode here */
- apply_microcode(0);
- return 0;
-}
-
-static struct sysdev_driver mc_sysdev_driver = {
- .add = mc_sysdev_add,
- .remove = mc_sysdev_remove,
- .resume = mc_sysdev_resume,
-};
-
-static __cpuinit int
-mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
-{
- unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
-
- sys_dev = get_cpu_sysdev(cpu);
- switch (action) {
- case CPU_UP_CANCELED_FROZEN:
- /* The CPU refused to come up during a system resume */
- microcode_fini_cpu(cpu);
- break;
- case CPU_ONLINE:
- case CPU_DOWN_FAILED:
- mc_sysdev_add(sys_dev);
- break;
- case CPU_ONLINE_FROZEN:
- /* System-wide resume is in progress, try to apply microcode */
- if (apply_microcode_check_cpu(cpu)) {
- /* The application of microcode failed */
- microcode_fini_cpu(cpu);
- __mc_sysdev_add(sys_dev, 1);
- break;
- }
- case CPU_DOWN_FAILED_FROZEN:
- if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
- printk(KERN_ERR "microcode: Failed to create the sysfs "
- "group for CPU%d\n", cpu);
- break;
- case CPU_DOWN_PREPARE:
- mc_sysdev_remove(sys_dev);
- break;
- case CPU_DOWN_PREPARE_FROZEN:
- /* Suspend is in progress, only remove the interface */
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __refdata mc_cpu_notifier = {
- .notifier_call = mc_cpu_callback,
-};
-
-static int __init microcode_init (void)
-{
- int error;
-
- printk(KERN_INFO
- "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@...azian.fsnet.co.uk>\n");
-
- error = microcode_dev_init();
- if (error)
- return error;
- microcode_pdev = platform_device_register_simple("microcode", -1,
- NULL, 0);
- if (IS_ERR(microcode_pdev)) {
- microcode_dev_exit();
- return PTR_ERR(microcode_pdev);
- }
-
- get_online_cpus();
- error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
- put_online_cpus();
- if (error) {
- microcode_dev_exit();
- platform_device_unregister(microcode_pdev);
- return error;
- }
-
- register_hotcpu_notifier(&mc_cpu_notifier);
- return 0;
-}
-
-static void __exit microcode_exit (void)
-{
- microcode_dev_exit();
-
- unregister_hotcpu_notifier(&mc_cpu_notifier);
-
- get_online_cpus();
- sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
- put_online_cpus();
-
- platform_device_unregister(microcode_pdev);
-}
-
-module_init(microcode_init)
-module_exit(microcode_exit)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
new file mode 100644
index 0000000..7a1f8ee
--- /dev/null
+++ b/arch/x86/kernel/microcode_amd.c
@@ -0,0 +1,435 @@
+/*
+ * AMD CPU Microcode Update Driver for Linux
+ * Copyright (C) 2008 Advanced Micro Devices Inc.
+ *
+ * Author: Peter Oruba <peter.oruba@....com>
+ *
+ * Based on work by:
+ * Tigran Aivazian <tigran@...azian.fsnet.co.uk>
+ *
+ * This driver allows to upgrade microcode on AMD
+ * family 0x10 and 0x11 processors.
+ *
+ * Licensed unter the terms of the GNU General Public
+ * License version 2. See file COPYING for details.
+*/
+
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("AMD Microcode Update Driver");
+MODULE_AUTHOR("Peter Oruba <peter.oruba@....com>");
+MODULE_LICENSE("GPL v2");
+
+#define UCODE_MAGIC 0x00414d44
+#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
+#define UCODE_UCODE_TYPE 0x00000001
+
+struct equiv_cpu_entry {
+ unsigned int installed_cpu;
+ unsigned int fixed_errata_mask;
+ unsigned int fixed_errata_compare;
+ unsigned int equiv_cpu;
+};
+
+struct microcode_header_amd {
+ unsigned int data_code;
+ unsigned int patch_id;
+ unsigned char mc_patch_data_id[2];
+ unsigned char mc_patch_data_len;
+ unsigned char init_flag;
+ unsigned int mc_patch_data_checksum;
+ unsigned int nb_dev_id;
+ unsigned int sb_dev_id;
+ unsigned char processor_rev_id[2];
+ unsigned char nb_rev_id;
+ unsigned char sb_rev_id;
+ unsigned char bios_api_rev;
+ unsigned char reserved1[3];
+ unsigned int match_reg[8];
+};
+
+struct microcode_amd {
+ struct microcode_header_amd hdr;
+ unsigned int mpb[0];
+};
+
+#define UCODE_MAX_SIZE (2048)
+#define DEFAULT_UCODE_DATASIZE (896)
+#define MC_HEADER_SIZE (sizeof(struct microcode_header_amd))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define DWSIZE (sizeof(u32))
+/* For now we support a fixed ucode total size only */
+#define get_totalsize(mc) \
+ ((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \
+ + MC_HEADER_SIZE)
+
+/* serialize access to the physical write */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static struct equiv_cpu_entry *equiv_cpu_table;
+
+static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ memset(csig, 0, sizeof(*csig));
+
+ if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+ printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n",
+ cpu);
+ return -1;
+ }
+
+ asm volatile("movl %1, %%ecx; rdmsr"
+ : "=a" (csig->rev)
+ : "i" (0x0000008B) : "ecx");
+
+ printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n",
+ csig->rev);
+
+ return 0;
+}
+
+static int get_matching_microcode(int cpu, void *mc, int rev)
+{
+ struct microcode_header_amd *mc_header = mc;
+ struct pci_dev *nb_pci_dev, *sb_pci_dev;
+ unsigned int current_cpu_id;
+ unsigned int equiv_cpu_id = 0x00;
+ unsigned int i = 0;
+
+ BUG_ON(equiv_cpu_table == NULL);
+ current_cpu_id = cpuid_eax(0x00000001);
+
+ while (equiv_cpu_table[i].installed_cpu != 0) {
+ if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
+ equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
+ break;
+ }
+ i++;
+ }
+
+ if (!equiv_cpu_id) {
+ printk(KERN_ERR "microcode: CPU%d cpu_id "
+ "not found in equivalent cpu table \n", cpu);
+ return 0;
+ }
+
+ if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) {
+ printk(KERN_ERR
+ "microcode: CPU%d patch does not match "
+ "(patch is %x, cpu extended is %x) \n",
+ cpu, mc_header->processor_rev_id[0],
+ (equiv_cpu_id & 0xff));
+ return 0;
+ }
+
+ if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) {
+ printk(KERN_ERR "microcode: CPU%d patch does not match "
+ "(patch is %x, cpu base id is %x) \n",
+ cpu, mc_header->processor_rev_id[1],
+ ((equiv_cpu_id >> 16) & 0xff));
+
+ return 0;
+ }
+
+ /* ucode may be northbridge specific */
+ if (mc_header->nb_dev_id) {
+ nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ (mc_header->nb_dev_id & 0xff),
+ NULL);
+ if ((!nb_pci_dev) ||
+ (mc_header->nb_rev_id != nb_pci_dev->revision)) {
+ printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu);
+ pci_dev_put(nb_pci_dev);
+ return 0;
+ }
+ pci_dev_put(nb_pci_dev);
+ }
+
+ /* ucode may be southbridge specific */
+ if (mc_header->sb_dev_id) {
+ sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ (mc_header->sb_dev_id & 0xff),
+ NULL);
+ if ((!sb_pci_dev) ||
+ (mc_header->sb_rev_id != sb_pci_dev->revision)) {
+ printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu);
+ pci_dev_put(sb_pci_dev);
+ return 0;
+ }
+ pci_dev_put(sb_pci_dev);
+ }
+
+ if (mc_header->patch_id <= rev)
+ return 0;
+
+ return 1;
+}
+
+static void apply_microcode_amd(int cpu)
+{
+ unsigned long flags;
+ unsigned int eax, edx;
+ unsigned int rev;
+ int cpu_num = raw_smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ struct microcode_amd *mc_amd = uci->mc;
+ unsigned long addr;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu_num != cpu);
+
+ if (mc_amd == NULL)
+ return;
+
+ spin_lock_irqsave(µcode_update_lock, flags);
+
+ addr = (unsigned long)&mc_amd->hdr.data_code;
+ edx = (unsigned int)(((unsigned long)upper_32_bits(addr)));
+ eax = (unsigned int)(((unsigned long)lower_32_bits(addr)));
+
+ asm volatile("movl %0, %%ecx; wrmsr" :
+ : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx");
+
+ /* get patch id after patching */
+ asm volatile("movl %1, %%ecx; rdmsr"
+ : "=a" (rev)
+ : "i" (0x0000008B) : "ecx");
+
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+
+ /* check current patch id and patch's id for match */
+ if (rev != mc_amd->hdr.patch_id) {
+ printk(KERN_ERR "microcode: CPU%d update from revision "
+ "0x%x to 0x%x failed\n", cpu_num,
+ mc_amd->hdr.patch_id, rev);
+ return;
+ }
+
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x \n",
+ cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id);
+
+ uci->cpu_sig.rev = rev;
+}
+
+static void * get_next_ucode(u8 *buf, unsigned int size,
+ int (*get_ucode_data)(void *, const void *, size_t),
+ unsigned int *mc_size)
+{
+ unsigned int total_size;
+#define UCODE_CONTAINER_SECTION_HDR 8
+ u8 section_hdr[UCODE_CONTAINER_SECTION_HDR];
+ void *mc;
+
+ if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR))
+ return NULL;
+
+ if (section_hdr[0] != UCODE_UCODE_TYPE) {
+ printk(KERN_ERR "microcode: error! "
+ "Wrong microcode payload type field\n");
+ return NULL;
+ }
+
+ total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
+
+ printk(KERN_INFO "microcode: size %u, total_size %u\n",
+ size, total_size);
+
+ if (total_size > size || total_size > UCODE_MAX_SIZE) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ return NULL;
+ }
+
+ mc = vmalloc(UCODE_MAX_SIZE);
+ if (mc) {
+ memset(mc, 0, UCODE_MAX_SIZE);
+ if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) {
+ vfree(mc);
+ mc = NULL;
+ } else
+ *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
+ }
+#undef UCODE_CONTAINER_SECTION_HDR
+ return mc;
+}
+
+
+static int install_equiv_cpu_table(u8 *buf,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+#define UCODE_CONTAINER_HEADER_SIZE 12
+ u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE];
+ unsigned int *buf_pos = (unsigned int *)container_hdr;
+ unsigned long size;
+
+ if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE))
+ return 0;
+
+ size = buf_pos[2];
+
+ if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
+ printk(KERN_ERR "microcode: error! "
+ "Wrong microcode equivalnet cpu table\n");
+ return 0;
+ }
+
+ equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+ if (!equiv_cpu_table) {
+ printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n");
+ return 0;
+ }
+
+ buf += UCODE_CONTAINER_HEADER_SIZE;
+ if (get_ucode_data(equiv_cpu_table, buf, size)) {
+ vfree(equiv_cpu_table);
+ return 0;
+ }
+
+ return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */
+#undef UCODE_CONTAINER_HEADER_SIZE
+}
+
+static void free_equiv_cpu_table(void)
+{
+ if (equiv_cpu_table) {
+ vfree(equiv_cpu_table);
+ equiv_cpu_table = NULL;
+ }
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover;
+ unsigned long offset;
+
+ offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data);
+ if (!offset) {
+ printk(KERN_ERR "microcode: installing equivalent cpu table failed\n");
+ return -EINVAL;
+ }
+
+ ucode_ptr += offset;
+ leftover = size - offset;
+
+ while (leftover) {
+ unsigned int uninitialized_var(mc_size);
+ struct microcode_header_amd *mc_header;
+
+ mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size);
+ if (!mc)
+ break;
+
+ mc_header = (struct microcode_header_amd *)mc;
+ if (get_matching_microcode(cpu, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header->patch_id;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
+ }
+
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc)
+ vfree(uci->mc);
+ uci->mc = new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, new_rev, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
+ }
+
+ free_equiv_cpu_table();
+
+ return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+ const char *fw_name = "amd-ucode/microcode_amd.bin";
+ const struct firmware *firmware;
+ int ret;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ ret = request_firmware(&firmware, fw_name, device);
+ if (ret) {
+ printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name);
+ return ret;
+ }
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
+ release_firmware(firmware);
+
+ return ret;
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode"
+ "is not supported\n");
+ return -1;
+}
+
+static void microcode_fini_cpu_amd(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ vfree(uci->mc);
+ uci->mc = NULL;
+}
+
+static struct microcode_ops microcode_amd_ops = {
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
+ .collect_cpu_info = collect_cpu_info_amd,
+ .apply_microcode = apply_microcode_amd,
+ .microcode_fini_cpu = microcode_fini_cpu_amd,
+};
+
+struct microcode_ops * __init init_amd_microcode(void)
+{
+ return µcode_amd_ops;
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
new file mode 100644
index 0000000..936d8d5
--- /dev/null
+++ b/arch/x86/kernel/microcode_core.c
@@ -0,0 +1,508 @@
+/*
+ * Intel CPU Microcode Update Driver for Linux
+ *
+ * Copyright (C) 2000-2006 Tigran Aivazian <tigran@...azian.fsnet.co.uk>
+ * 2006 Shaohua Li <shaohua.li@...el.com>
+ *
+ * This driver allows to upgrade microcode on Intel processors
+ * belonging to IA-32 family - PentiumPro, Pentium II,
+ * Pentium III, Xeon, Pentium 4, etc.
+ *
+ * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ * Software Developer's Manual
+ * Order Number 253668 or free download from:
+ *
+ * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ * For more information, go to http://www.urbanmyth.org/microcode
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 1.0 16 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Initial release.
+ * 1.01 18 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Added read() support + cleanups.
+ * 1.02 21 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Added 'device trimming' support. open(O_WRONLY) zeroes
+ * and frees the saved copy of applied microcode.
+ * 1.03 29 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Made to use devfs (/dev/cpu/microcode) + cleanups.
+ * 1.04 06 Jun 2000, Simon Trimmer <simon@...itas.com>
+ * Added misc device support (now uses both devfs and misc).
+ * Added MICROCODE_IOCFREE ioctl to clear memory.
+ * 1.05 09 Jun 2000, Simon Trimmer <simon@...itas.com>
+ * Messages for error cases (non Intel & no suitable microcode).
+ * 1.06 03 Aug 2000, Tigran Aivazian <tigran@...itas.com>
+ * Removed ->release(). Removed exclusive open and status bitmap.
+ * Added microcode_rwsem to serialize read()/write()/ioctl().
+ * Removed global kernel lock usage.
+ * 1.07 07 Sep 2000, Tigran Aivazian <tigran@...itas.com>
+ * Write 0 to 0x8B msr and then cpuid before reading revision,
+ * so that it works even if there were no update done by the
+ * BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ * to be 0 on my machine which is why it worked even when I
+ * disabled update by the BIOS)
+ * Thanks to Eric W. Biederman <ebiederman@...i.com> for the fix.
+ * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@...el.com> and
+ * Tigran Aivazian <tigran@...itas.com>
+ * Intel Pentium 4 processor support and bugfixes.
+ * 1.09 30 Oct 2001, Tigran Aivazian <tigran@...itas.com>
+ * Bugfix for HT (Hyper-Threading) enabled processors
+ * whereby processor resources are shared by all logical processors
+ * in a single CPU package.
+ * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@...el.com> and
+ * Tigran Aivazian <tigran@...itas.com>,
+ * Serialize updates as required on HT processors due to
+ * speculative nature of implementation.
+ * 1.11 22 Mar 2002 Tigran Aivazian <tigran@...itas.com>
+ * Fix the panic when writing zero-length microcode chunk.
+ * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@...el.com>,
+ * Jun Nakajima <jun.nakajima@...el.com>
+ * Support for the microcode updates in the new format.
+ * 1.13 10 Oct 2003 Tigran Aivazian <tigran@...itas.com>
+ * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ * because we no longer hold a copy of applied microcode
+ * in kernel memory.
+ * 1.14 25 Jun 2004 Tigran Aivazian <tigran@...itas.com>
+ * Fix sigmatch() macro to handle old CPUs with pf == 0.
+ * Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@...azian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION "2.00"
+
+struct microcode_ops *microcode_ops;
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DEFINE_MUTEX(microcode_mutex);
+
+struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+EXPORT_SYMBOL_GPL(ucode_cpu_info);
+
+#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+static int do_microcode_update(const void __user *buf, size_t size)
+{
+ cpumask_t old;
+ int error = 0;
+ int cpu;
+
+ old = current->cpus_allowed;
+
+ for_each_online_cpu(cpu) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!uci->valid)
+ continue;
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
+ if (error < 0)
+ goto out;
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
+ }
+out:
+ set_cpus_allowed_ptr(current, &old);
+ return error;
+}
+
+static int microcode_open(struct inode *unused1, struct file *unused2)
+{
+ cycle_kernel_lock();
+ return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static ssize_t microcode_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ ssize_t ret;
+
+ if ((len >> PAGE_SHIFT) > num_physpages) {
+ printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
+ num_physpages);
+ return -EINVAL;
+ }
+
+ get_online_cpus();
+ mutex_lock(µcode_mutex);
+
+ ret = do_microcode_update(buf, len);
+ if (!ret)
+ ret = (ssize_t)len;
+
+ mutex_unlock(µcode_mutex);
+ put_online_cpus();
+
+ return ret;
+}
+
+static const struct file_operations microcode_fops = {
+ .owner = THIS_MODULE,
+ .write = microcode_write,
+ .open = microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+ .minor = MICROCODE_MINOR,
+ .name = "microcode",
+ .fops = µcode_fops,
+};
+
+static int __init microcode_dev_init(void)
+{
+ int error;
+
+ error = misc_register(µcode_dev);
+ if (error) {
+ printk(KERN_ERR
+ "microcode: can't misc_register on minor=%d\n",
+ MICROCODE_MINOR);
+ return error;
+ }
+
+ return 0;
+}
+
+static void microcode_dev_exit(void)
+{
+ misc_deregister(µcode_dev);
+}
+
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+#else
+#define microcode_dev_init() 0
+#define microcode_dev_exit() do { } while (0)
+#endif
+
+/* fake device for request_firmware */
+struct platform_device *microcode_pdev;
+
+static ssize_t reload_store(struct sys_device *dev,
+ struct sysdev_attribute *attr,
+ const char *buf, size_t sz)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+ char *end;
+ unsigned long val = simple_strtoul(buf, &end, 0);
+ int err = 0;
+ int cpu = dev->id;
+
+ if (end == buf)
+ return -EINVAL;
+ if (val == 1) {
+ cpumask_t old = current->cpus_allowed;
+
+ get_online_cpus();
+ if (cpu_online(cpu)) {
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ mutex_lock(µcode_mutex);
+ if (uci->valid) {
+ err = microcode_ops->request_microcode_fw(cpu,
+ µcode_pdev->dev);
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+ }
+ mutex_unlock(µcode_mutex);
+ set_cpus_allowed_ptr(current, &old);
+ }
+ put_online_cpus();
+ }
+ if (err)
+ return err;
+ return sz;
+}
+
+static ssize_t version_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
+}
+
+static ssize_t pf_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
+}
+
+static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
+static SYSDEV_ATTR(version, 0400, version_show, NULL);
+static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+
+static struct attribute *mc_default_attrs[] = {
+ &attr_reload.attr,
+ &attr_version.attr,
+ &attr_processor_flags.attr,
+ NULL
+};
+
+static struct attribute_group mc_attr_group = {
+ .attrs = mc_default_attrs,
+ .name = "microcode",
+};
+
+static void microcode_fini_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ mutex_lock(µcode_mutex);
+ microcode_ops->microcode_fini_cpu(cpu);
+ uci->valid = 0;
+ mutex_unlock(µcode_mutex);
+}
+
+static void collect_cpu_info(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ memset(uci, 0, sizeof(*uci));
+ if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
+ uci->valid = 1;
+}
+
+static int microcode_resume_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct cpu_signature nsig;
+
+ pr_debug("microcode: CPU%d resumed\n", cpu);
+
+ if (!uci->mc)
+ return 1;
+
+ /*
+ * Let's verify that the 'cached' ucode does belong
+ * to this cpu (a bit of paranoia):
+ */
+ if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
+ microcode_fini_cpu(cpu);
+ return -1;
+ }
+
+ if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
+ microcode_fini_cpu(cpu);
+ /* Should we look for a new ucode here? */
+ return 1;
+ }
+
+ return 0;
+}
+
+void microcode_update_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ int err = 0;
+
+ /*
+ * Check if the system resume is in progress (uci->valid != NULL),
+ * otherwise just request a firmware:
+ */
+ if (uci->valid) {
+ err = microcode_resume_cpu(cpu);
+ } else {
+ collect_cpu_info(cpu);
+ if (uci->valid && system_state == SYSTEM_RUNNING)
+ err = microcode_ops->request_microcode_fw(cpu,
+ µcode_pdev->dev);
+ }
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+}
+
+static void microcode_init_cpu(int cpu)
+{
+ cpumask_t old = current->cpus_allowed;
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ /* We should bind the task to the CPU */
+ BUG_ON(raw_smp_processor_id() != cpu);
+
+ mutex_lock(µcode_mutex);
+ microcode_update_cpu(cpu);
+ mutex_unlock(µcode_mutex);
+
+ set_cpus_allowed_ptr(current, &old);
+}
+
+static int mc_sysdev_add(struct sys_device *sys_dev)
+{
+ int err, cpu = sys_dev->id;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ pr_debug("microcode: CPU%d added\n", cpu);
+ memset(uci, 0, sizeof(*uci));
+
+ err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+ if (err)
+ return err;
+
+ microcode_init_cpu(cpu);
+ return 0;
+}
+
+static int mc_sysdev_remove(struct sys_device *sys_dev)
+{
+ int cpu = sys_dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ pr_debug("microcode: CPU%d removed\n", cpu);
+ microcode_fini_cpu(cpu);
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ return 0;
+}
+
+static int mc_sysdev_resume(struct sys_device *dev)
+{
+ int cpu = dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ /* only CPU 0 will apply ucode here */
+ microcode_update_cpu(0);
+ return 0;
+}
+
+static struct sysdev_driver mc_sysdev_driver = {
+ .add = mc_sysdev_add,
+ .remove = mc_sysdev_remove,
+ .resume = mc_sysdev_resume,
+};
+
+static __cpuinit int
+mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ microcode_init_cpu(cpu);
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ pr_debug("microcode: CPU%d added\n", cpu);
+ if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+ printk(KERN_ERR "microcode: Failed to create the sysfs "
+ "group for CPU%d\n", cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ /* Suspend is in progress, only remove the interface */
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ pr_debug("microcode: CPU%d removed\n", cpu);
+ break;
+ case CPU_DEAD:
+ case CPU_UP_CANCELED_FROZEN:
+ /* The CPU refused to come up during a system resume */
+ microcode_fini_cpu(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __refdata mc_cpu_notifier = {
+ .notifier_call = mc_cpu_callback,
+};
+
+static int __init microcode_init(void)
+{
+ struct cpuinfo_x86 *c = &cpu_data(0);
+ int error;
+
+ if (c->x86_vendor == X86_VENDOR_INTEL)
+ microcode_ops = init_intel_microcode();
+ else if (c->x86_vendor == X86_VENDOR_AMD)
+ microcode_ops = init_amd_microcode();
+
+ if (!microcode_ops) {
+ printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+ return -ENODEV;
+ }
+
+ error = microcode_dev_init();
+ if (error)
+ return error;
+ microcode_pdev = platform_device_register_simple("microcode", -1,
+ NULL, 0);
+ if (IS_ERR(microcode_pdev)) {
+ microcode_dev_exit();
+ return PTR_ERR(microcode_pdev);
+ }
+
+ get_online_cpus();
+ error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+ put_online_cpus();
+ if (error) {
+ microcode_dev_exit();
+ platform_device_unregister(microcode_pdev);
+ return error;
+ }
+
+ register_hotcpu_notifier(&mc_cpu_notifier);
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION
+ " <tigran@...azian.fsnet.co.uk>"
+ " <peter.oruba@....com>\n");
+
+ return 0;
+}
+
+static void __exit microcode_exit(void)
+{
+ microcode_dev_exit();
+
+ unregister_hotcpu_notifier(&mc_cpu_notifier);
+
+ get_online_cpus();
+ sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+ put_online_cpus();
+
+ platform_device_unregister(microcode_pdev);
+
+ microcode_ops = NULL;
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+}
+
+module_init(microcode_init);
+module_exit(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
new file mode 100644
index 0000000..622dc4a
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel.c
@@ -0,0 +1,480 @@
+/*
+ * Intel CPU Microcode Update Driver for Linux
+ *
+ * Copyright (C) 2000-2006 Tigran Aivazian <tigran@...azian.fsnet.co.uk>
+ * 2006 Shaohua Li <shaohua.li@...el.com>
+ *
+ * This driver allows to upgrade microcode on Intel processors
+ * belonging to IA-32 family - PentiumPro, Pentium II,
+ * Pentium III, Xeon, Pentium 4, etc.
+ *
+ * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ * Software Developer's Manual
+ * Order Number 253668 or free download from:
+ *
+ * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ * For more information, go to http://www.urbanmyth.org/microcode
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 1.0 16 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Initial release.
+ * 1.01 18 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Added read() support + cleanups.
+ * 1.02 21 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Added 'device trimming' support. open(O_WRONLY) zeroes
+ * and frees the saved copy of applied microcode.
+ * 1.03 29 Feb 2000, Tigran Aivazian <tigran@....com>
+ * Made to use devfs (/dev/cpu/microcode) + cleanups.
+ * 1.04 06 Jun 2000, Simon Trimmer <simon@...itas.com>
+ * Added misc device support (now uses both devfs and misc).
+ * Added MICROCODE_IOCFREE ioctl to clear memory.
+ * 1.05 09 Jun 2000, Simon Trimmer <simon@...itas.com>
+ * Messages for error cases (non Intel & no suitable microcode).
+ * 1.06 03 Aug 2000, Tigran Aivazian <tigran@...itas.com>
+ * Removed ->release(). Removed exclusive open and status bitmap.
+ * Added microcode_rwsem to serialize read()/write()/ioctl().
+ * Removed global kernel lock usage.
+ * 1.07 07 Sep 2000, Tigran Aivazian <tigran@...itas.com>
+ * Write 0 to 0x8B msr and then cpuid before reading revision,
+ * so that it works even if there were no update done by the
+ * BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ * to be 0 on my machine which is why it worked even when I
+ * disabled update by the BIOS)
+ * Thanks to Eric W. Biederman <ebiederman@...i.com> for the fix.
+ * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@...el.com> and
+ * Tigran Aivazian <tigran@...itas.com>
+ * Intel Pentium 4 processor support and bugfixes.
+ * 1.09 30 Oct 2001, Tigran Aivazian <tigran@...itas.com>
+ * Bugfix for HT (Hyper-Threading) enabled processors
+ * whereby processor resources are shared by all logical processors
+ * in a single CPU package.
+ * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@...el.com> and
+ * Tigran Aivazian <tigran@...itas.com>,
+ * Serialize updates as required on HT processors due to
+ * speculative nature of implementation.
+ * 1.11 22 Mar 2002 Tigran Aivazian <tigran@...itas.com>
+ * Fix the panic when writing zero-length microcode chunk.
+ * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@...el.com>,
+ * Jun Nakajima <jun.nakajima@...el.com>
+ * Support for the microcode updates in the new format.
+ * 1.13 10 Oct 2003 Tigran Aivazian <tigran@...itas.com>
+ * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ * because we no longer hold a copy of applied microcode
+ * in kernel memory.
+ * 1.14 25 Jun 2004 Tigran Aivazian <tigran@...itas.com>
+ * Fix sigmatch() macro to handle old CPUs with pf == 0.
+ * Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@...azian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+struct microcode_header_intel {
+ unsigned int hdrver;
+ unsigned int rev;
+ unsigned int date;
+ unsigned int sig;
+ unsigned int cksum;
+ unsigned int ldrver;
+ unsigned int pf;
+ unsigned int datasize;
+ unsigned int totalsize;
+ unsigned int reserved[3];
+};
+
+struct microcode_intel {
+ struct microcode_header_intel hdr;
+ unsigned int bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int cksum;
+};
+
+struct extended_sigtable {
+ unsigned int count;
+ unsigned int cksum;
+ unsigned int reserved[3];
+ struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE (2000)
+#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature))
+#define DWSIZE (sizeof(u32))
+#define get_totalsize(mc) \
+ (((struct microcode_intel *)mc)->hdr.totalsize ? \
+ ((struct microcode_intel *)mc)->hdr.totalsize : \
+ DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+ (((struct microcode_intel *)mc)->hdr.datasize ? \
+ ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+ (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+ unsigned int val[2];
+
+ memset(csig, 0, sizeof(*csig));
+
+ if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+ cpu_has(c, X86_FEATURE_IA64)) {
+ printk(KERN_ERR "microcode: CPU%d not a capable Intel "
+ "processor\n", cpu_num);
+ return -1;
+ }
+
+ csig->sig = cpuid_eax(0x00000001);
+
+ if ((c->x86_model >= 5) || (c->x86 > 6)) {
+ /* get processor flags from MSR 0x17 */
+ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+ csig->pf = 1 << ((val[1] >> 18) & 7);
+ }
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ /* see notes above for revision 1.07. Apparent chip bug */
+ sync_core();
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+ pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+ csig->sig, csig->pf, csig->rev);
+
+ return 0;
+}
+
+static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
+{
+ return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
+}
+
+static inline int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+ return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+static int microcode_sanity_check(void *mc)
+{
+ struct microcode_header_intel *mc_header = mc;
+ struct extended_sigtable *ext_header = NULL;
+ struct extended_signature *ext_sig;
+ unsigned long total_size, data_size, ext_table_size;
+ int sum, orig_sum, ext_sigcount = 0, i;
+
+ total_size = get_totalsize(mc_header);
+ data_size = get_datasize(mc_header);
+ if (data_size + MC_HEADER_SIZE > total_size) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad data size in microcode data file\n");
+ return -EINVAL;
+ }
+
+ if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+ printk(KERN_ERR "microcode: error! "
+ "Unknown microcode update format\n");
+ return -EINVAL;
+ }
+ ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+ if (ext_table_size) {
+ if ((ext_table_size < EXT_HEADER_SIZE)
+ || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+ printk(KERN_ERR "microcode: error! "
+ "Small exttable size in microcode data file\n");
+ return -EINVAL;
+ }
+ ext_header = mc + MC_HEADER_SIZE + data_size;
+ if (ext_table_size != exttable_size(ext_header)) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad exttable size in microcode data file\n");
+ return -EFAULT;
+ }
+ ext_sigcount = ext_header->count;
+ }
+
+ /* check extended table checksum */
+ if (ext_table_size) {
+ int ext_table_sum = 0;
+ int *ext_tablep = (int *)ext_header;
+
+ i = ext_table_size / DWSIZE;
+ while (i--)
+ ext_table_sum += ext_tablep[i];
+ if (ext_table_sum) {
+ printk(KERN_WARNING "microcode: aborting, "
+ "bad extended signature table checksum\n");
+ return -EINVAL;
+ }
+ }
+
+ /* calculate the checksum */
+ orig_sum = 0;
+ i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+ while (i--)
+ orig_sum += ((int *)mc)[i];
+ if (orig_sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ if (!ext_table_size)
+ return 0;
+ /* check extended signature checksum */
+ for (i = 0; i < ext_sigcount; i++) {
+ ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+ EXT_SIGNATURE_SIZE * i;
+ sum = orig_sum
+ - (mc_header->sig + mc_header->pf + mc_header->cksum)
+ + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+ if (sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+static int
+get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+{
+ struct microcode_header_intel *mc_header = mc;
+ struct extended_sigtable *ext_header;
+ unsigned long total_size = get_totalsize(mc_header);
+ int ext_sigcount, i;
+ struct extended_signature *ext_sig;
+
+ if (!update_match_revision(mc_header, rev))
+ return 0;
+
+ if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
+ return 1;
+
+ /* Look for ext. headers: */
+ if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+ return 0;
+
+ ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+ ext_sigcount = ext_header->count;
+ ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+ for (i = 0; i < ext_sigcount; i++) {
+ if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
+ return 1;
+ ext_sig++;
+ }
+ return 0;
+}
+
+static void apply_microcode(int cpu)
+{
+ unsigned long flags;
+ unsigned int val[2];
+ int cpu_num = raw_smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct microcode_intel *mc_intel = uci->mc;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu_num != cpu);
+
+ if (mc_intel == NULL)
+ return;
+
+ /* serialize access to the physical write to MSR 0x79 */
+ spin_lock_irqsave(µcode_update_lock, flags);
+
+ /* write microcode via MSR 0x79 */
+ wrmsr(MSR_IA32_UCODE_WRITE,
+ (unsigned long) mc_intel->bits,
+ (unsigned long) mc_intel->bits >> 16 >> 16);
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+ /* see notes above for revision 1.07. Apparent chip bug */
+ sync_core();
+
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+ if (val[1] != mc_intel->hdr.rev) {
+ printk(KERN_ERR "microcode: CPU%d update from revision "
+ "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]);
+ return;
+ }
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x, date = %04x-%02x-%02x \n",
+ cpu_num, uci->cpu_sig.rev, val[1],
+ mc_intel->hdr.date & 0xffff,
+ mc_intel->hdr.date >> 24,
+ (mc_intel->hdr.date >> 16) & 0xff);
+ uci->cpu_sig.rev = val[1];
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover = size;
+
+ while (leftover) {
+ struct microcode_header_intel mc_header;
+ unsigned int mc_size;
+
+ if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
+ break;
+
+ mc_size = get_totalsize(&mc_header);
+ if (!mc_size || mc_size > leftover) {
+ printk(KERN_ERR "microcode: error!"
+ "Bad data in microcode data file\n");
+ break;
+ }
+
+ mc = vmalloc(mc_size);
+ if (!mc)
+ break;
+
+ if (get_ucode_data(mc, ucode_ptr, mc_size) ||
+ microcode_sanity_check(mc) < 0) {
+ vfree(mc);
+ break;
+ }
+
+ if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header.rev;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
+ }
+
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc)
+ vfree(uci->mc);
+ uci->mc = (struct microcode_intel *)new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, new_rev, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
+ }
+
+ return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+ char name[30];
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ const struct firmware *firmware;
+ int ret;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+ sprintf(name, "intel-ucode/%02x-%02x-%02x",
+ c->x86, c->x86_model, c->x86_mask);
+ ret = request_firmware(&firmware, name, device);
+ if (ret) {
+ pr_debug("microcode: data file %s load failed\n", name);
+ return ret;
+ }
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
+ release_firmware(firmware);
+
+ return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+ return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ vfree(uci->mc);
+ uci->mc = NULL;
+}
+
+struct microcode_ops microcode_intel_ops = {
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
+ .collect_cpu_info = collect_cpu_info,
+ .apply_microcode = apply_microcode,
+ .microcode_fini_cpu = microcode_fini_cpu,
+};
+
+struct microcode_ops * __init init_intel_microcode(void)
+{
+ return µcode_intel_ops;
+}
+
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index e3599a4..6133530 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -582,6 +582,190 @@ static struct x86_quirks default_x86_quirks __initdata;
struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
/*
+ * Some BIOSes seem to corrupt the low 64k of memory during events
+ * like suspend/resume and unplugging an HDMI cable. Reserve all
+ * remaining free memory in that area and fill it with a distinct
+ * pattern.
+ */
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+#define MAX_SCAN_AREAS 8
+
+static int __read_mostly memory_corruption_check = -1;
+
+static unsigned __read_mostly corruption_check_size = 64*1024;
+static unsigned __read_mostly corruption_check_period = 60; /* seconds */
+
+static struct e820entry scan_areas[MAX_SCAN_AREAS];
+static int num_scan_areas;
+
+
+static int set_corruption_check(char *arg)
+{
+ char *end;
+
+ memory_corruption_check = simple_strtol(arg, &end, 10);
+
+ return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check", set_corruption_check);
+
+static int set_corruption_check_period(char *arg)
+{
+ char *end;
+
+ corruption_check_period = simple_strtoul(arg, &end, 10);
+
+ return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_period", set_corruption_check_period);
+
+static int set_corruption_check_size(char *arg)
+{
+ char *end;
+ unsigned size;
+
+ size = memparse(arg, &end);
+
+ if (*end == '\0')
+ corruption_check_size = size;
+
+ return (size == corruption_check_size) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_size", set_corruption_check_size);
+
+
+static void __init setup_bios_corruption_check(void)
+{
+ u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */
+
+ if (memory_corruption_check == -1) {
+ memory_corruption_check =
+#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ 1
+#else
+ 0
+#endif
+ ;
+ }
+
+ if (corruption_check_size == 0)
+ memory_corruption_check = 0;
+
+ if (!memory_corruption_check)
+ return;
+
+ corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
+
+ while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
+ u64 size;
+ addr = find_e820_area_size(addr, &size, PAGE_SIZE);
+
+ if (addr == 0)
+ break;
+
+ if ((addr + size) > corruption_check_size)
+ size = corruption_check_size - addr;
+
+ if (size == 0)
+ break;
+
+ e820_update_range(addr, size, E820_RAM, E820_RESERVED);
+ scan_areas[num_scan_areas].addr = addr;
+ scan_areas[num_scan_areas].size = size;
+ num_scan_areas++;
+
+ /* Assume we've already mapped this early memory */
+ memset(__va(addr), 0, size);
+
+ addr += size;
+ }
+
+ printk(KERN_INFO "Scanning %d areas for low memory corruption\n",
+ num_scan_areas);
+ update_e820();
+}
+
+static struct timer_list periodic_check_timer;
+
+void check_for_bios_corruption(void)
+{
+ int i;
+ int corruption = 0;
+
+ if (!memory_corruption_check)
+ return;
+
+ for(i = 0; i < num_scan_areas; i++) {
+ unsigned long *addr = __va(scan_areas[i].addr);
+ unsigned long size = scan_areas[i].size;
+
+ for(; size; addr++, size -= sizeof(unsigned long)) {
+ if (!*addr)
+ continue;
+ printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n",
+ addr, __pa(addr), *addr);
+ corruption = 1;
+ *addr = 0;
+ }
+ }
+
+ WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n");
+}
+
+static void periodic_check_for_corruption(unsigned long data)
+{
+ check_for_bios_corruption();
+ mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ));
+}
+
+void start_periodic_check_for_corruption(void)
+{
+ if (!memory_corruption_check || corruption_check_period == 0)
+ return;
+
+ printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n",
+ corruption_check_period);
+
+ init_timer(&periodic_check_timer);
+ periodic_check_timer.function = &periodic_check_for_corruption;
+ periodic_check_for_corruption(0);
+}
+#endif
+
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE
+ "%s detected: BIOS may corrupt low RAM, working it around.\n",
+ d->ident);
+
+ e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+ return 0;
+}
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ },
+ },
+#endif
+ {}
+};
+
+/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
* for initialization. Note, the efi init code path is determined by the
@@ -715,6 +899,10 @@ void __init setup_arch(char **cmdline_p)
finish_e820_parsing();
+ dmi_scan_machine();
+
+ dmi_check_system(bad_bios_dmi_table);
+
#ifdef CONFIG_X86_32
probe_roms();
#endif
@@ -771,6 +959,10 @@ void __init setup_arch(char **cmdline_p)
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
#endif
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+ setup_bios_corruption_check();
+#endif
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
@@ -799,8 +991,6 @@ void __init setup_arch(char **cmdline_p)
vsmp_init();
#endif
- dmi_scan_machine();
-
io_delay_init();
/*
@@ -909,3 +1099,5 @@ void __init setup_arch(char **cmdline_p)
#endif
#endif
}
+
+
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index bbecf8b..77b400f 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -47,10 +47,9 @@ unsigned long profile_pc(struct pt_regs *regs)
unsigned long pc = instruction_pointer(regs);
#ifdef CONFIG_SMP
- if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->cs) &&
- in_lock_functions(pc)) {
+ if (!user_mode_vm(regs) && in_lock_functions(pc)) {
#ifdef CONFIG_FRAME_POINTER
- return *(unsigned long *)(regs->bp + 4);
+ return *(unsigned long *)(regs->bp + sizeof(long));
#else
unsigned long *sp = (unsigned long *)®s->sp;
@@ -95,6 +94,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
do_timer_interrupt_hook();
+#ifdef CONFIG_MCA
if (MCA_bus) {
/* The PS/2 uses level-triggered interrupts. You can't
turn them off, nor would you want to (any attempt to
@@ -108,6 +108,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
u8 irq_v = inb_p( 0x61 ); /* read the current state */
outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */
}
+#endif
return IRQ_HANDLED;
}
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index e3d49c5..cb19d65 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/time.h>
+#include <linux/mca.h>
#include <asm/i8253.h>
#include <asm/hpet.h>
@@ -33,23 +34,34 @@ unsigned long profile_pc(struct pt_regs *regs)
/* Assume the lock function has either no stack frame or a copy
of flags from PUSHF
Eflags always has bits 22 and up cleared unlike kernel addresses. */
- if (!user_mode(regs) && in_lock_functions(pc)) {
+ if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
+ return *(unsigned long *)(regs->bp + sizeof(long));
+#else
unsigned long *sp = (unsigned long *)regs->sp;
if (sp[0] >> 22)
return sp[0];
if (sp[1] >> 22)
return sp[1];
+#endif
}
return pc;
}
EXPORT_SYMBOL(profile_pc);
-static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
+irqreturn_t timer_interrupt(int irq, void *dev_id)
{
add_pda(irq0_irqs, 1);
global_clock_event->event_handler(global_clock_event);
+#ifdef CONFIG_MCA
+ if (MCA_bus) {
+ u8 irq_v = inb_p(0x61); /* read the current state */
+ outb_p(irq_v|0x80, 0x61); /* reset the IRQ */
+ }
+#endif
+
return IRQ_HANDLED;
}
@@ -100,7 +112,7 @@ unsigned long __init calibrate_cpu(void)
}
static struct irqaction irq0 = {
- .handler = timer_event_interrupt,
+ .handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
.mask = CPU_MASK_NONE,
.name = "timer"
@@ -111,16 +123,13 @@ void __init hpet_time_init(void)
if (!hpet_enable())
setup_pit_timer();
+ irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
void __init time_init(void)
{
tsc_init();
- if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
- vgetcpu_mode = VGETCPU_RDTSCP;
- else
- vgetcpu_mode = VGETCPU_LSL;
late_time_init = choose_time_init();
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ffb131f..e062974 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -429,43 +429,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
}
-#ifdef CONFIG_X86_32
-static DEFINE_SPINLOCK(nmi_print_lock);
-
-void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
-{
- if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP)
- return;
-
- spin_lock(&nmi_print_lock);
- /*
- * We are in trouble anyway, lets at least try
- * to get a message out:
- */
- bust_spinlocks(1);
- printk(KERN_EMERG "%s", str);
- printk(" on CPU%d, ip %08lx, registers:\n",
- smp_processor_id(), regs->ip);
- show_registers(regs);
- if (do_panic)
- panic("Non maskable interrupt");
- console_silent();
- spin_unlock(&nmi_print_lock);
- bust_spinlocks(0);
-
- /*
- * If we are in kernel we are probably nested up pretty bad
- * and might aswell get out now while we still can:
- */
- if (!user_mode_vm(regs)) {
- current->thread.trap_no = 2;
- crash_kexec(regs);
- }
-
- do_exit(SIGSEGV);
-}
-#endif
-
static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 07713d6..ed5274a 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -272,7 +272,7 @@ void __cpuinit xsave_init(void)
/*
* setup the xstate image representing the init state
*/
-void setup_xstate_init(void)
+static void __init setup_xstate_init(void)
{
init_xstate_buf = alloc_bootmem(xstate_size);
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index d3fc121..1dcba3a 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -970,6 +970,8 @@ void __init mem_init(void)
int codesize, reservedpages, datasize, initsize;
int tmp;
+ start_periodic_check_for_corruption();
+
#ifdef CONFIG_FLATMEM
BUG_ON(!mem_map);
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 747f6c9..a624017 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -905,6 +905,8 @@ void __init mem_init(void)
{
long codesize, reservedpages, datasize, initsize;
+ start_periodic_check_for_corruption();
+
pci_iommu_alloc();
/* clear_bss() already clear the empty_zero_page */
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index d3e6846..87b9ab1 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -26,7 +26,7 @@ config XEN_MAX_DOMAIN_MEMORY
config XEN_SAVE_RESTORE
bool
- depends on PM
+ depends on XEN && PM
default y
config XEN_DEBUG_FS
@@ -35,4 +35,4 @@ config XEN_DEBUG_FS
default n
help
Enable statistics output and various tuning options in debugfs.
- Enabling this option may incur a significant performance overhead.
\ No newline at end of file
+ Enabling this option may incur a significant performance overhead.
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 708b8ea..7a34753 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -113,7 +113,14 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
*
* 0: not available, 1: available
*/
-static int have_vcpu_info_placement = 1;
+static int have_vcpu_info_placement =
+#ifdef CONFIG_X86_32
+ 1
+#else
+ 0
+#endif
+ ;
+
static void xen_vcpu_setup(int cpu)
{
@@ -973,6 +980,7 @@ static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
}
#endif
+#ifdef CONFIG_X86_32
static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
{
/* If there's an existing pte, then don't allow _PAGE_RW to be set */
@@ -991,6 +999,7 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
xen_set_pte(ptep, pte);
}
+#endif
static __init void xen_pagetable_setup_start(pgd_t *base)
{
@@ -1057,7 +1066,6 @@ void xen_setup_vcpu_info_placement(void)
/* xen_vcpu_setup managed to place the vcpu_info within the
percpu area for all cpus, so make use of it */
-#ifdef CONFIG_X86_32
if (have_vcpu_info_placement) {
printk(KERN_INFO "Xen: using vcpu_info placement\n");
@@ -1067,7 +1075,6 @@ void xen_setup_vcpu_info_placement(void)
pv_irq_ops.irq_enable = xen_irq_enable_direct;
pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
}
-#endif
}
static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -1088,12 +1095,10 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
goto patch_site
switch (type) {
-#ifdef CONFIG_X86_32
SITE(pv_irq_ops, irq_enable);
SITE(pv_irq_ops, irq_disable);
SITE(pv_irq_ops, save_fl);
SITE(pv_irq_ops, restore_fl);
-#endif /* CONFIG_X86_32 */
#undef SITE
patch_site:
@@ -1429,48 +1434,11 @@ static void *m2v(phys_addr_t maddr)
return __ka(m2p(maddr));
}
-#ifdef CONFIG_X86_64
-static void walk(pgd_t *pgd, unsigned long addr)
-{
- unsigned l4idx = pgd_index(addr);
- unsigned l3idx = pud_index(addr);
- unsigned l2idx = pmd_index(addr);
- unsigned l1idx = pte_index(addr);
- pgd_t l4;
- pud_t l3;
- pmd_t l2;
- pte_t l1;
-
- xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
- pgd, addr, l4idx, l3idx, l2idx, l1idx);
-
- l4 = pgd[l4idx];
- xen_raw_printk(" l4: %016lx\n", l4.pgd);
- xen_raw_printk(" %016lx\n", pgd_val(l4));
-
- l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
- xen_raw_printk(" l3: %016lx\n", l3.pud);
- xen_raw_printk(" %016lx\n", pud_val(l3));
-
- l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
- xen_raw_printk(" l2: %016lx\n", l2.pmd);
- xen_raw_printk(" %016lx\n", pmd_val(l2));
-
- l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
- xen_raw_printk(" l1: %016lx\n", l1.pte);
- xen_raw_printk(" %016lx\n", pte_val(l1));
-}
-#endif
-
static void set_page_prot(void *addr, pgprot_t prot)
{
unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
pte_t pte = pfn_pte(pfn, prot);
- xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
- addr, pfn, get_phys_to_machine(pfn),
- pgprot_val(prot), pte.pte);
-
if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
BUG();
}
@@ -1735,15 +1703,6 @@ asmlinkage void __init xen_start_kernel(void)
xen_raw_console_write("about to get started...\n");
-#if 0
- xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
- &boot_params, __pa_symbol(&boot_params),
- __va(__pa_symbol(&boot_params)));
-
- walk(pgd, &boot_params);
- walk(pgd, __va(__pa(&boot_params)));
-#endif
-
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 3b9bda4..05794c5 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -26,8 +26,15 @@
/* Pseudo-flag used for virtual NMI, which we don't implement yet */
#define XEN_EFLAGS_NMI 0x80000000
-#if 0
-#include <asm/percpu.h>
+#if 1
+/*
+ x86-64 does not yet support direct access to percpu variables
+ via a segment override, so we just need to make sure this code
+ never gets used
+ */
+#define BUG ud2a
+#define PER_CPU_VAR(var, off) 0xdeadbeef
+#endif
/*
Enable events. This clears the event mask and tests the pending
@@ -35,6 +42,8 @@
events, then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
+ BUG
+
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
@@ -58,6 +67,8 @@ ENDPATCH(xen_irq_enable_direct)
non-zero.
*/
ENTRY(xen_irq_disable_direct)
+ BUG
+
movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
ENDPATCH(xen_irq_disable_direct)
ret
@@ -74,6 +85,8 @@ ENDPATCH(xen_irq_disable_direct)
Xen and x86 use opposite senses (mask vs enable).
*/
ENTRY(xen_save_fl_direct)
+ BUG
+
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
setz %ah
addb %ah,%ah
@@ -91,6 +104,8 @@ ENDPATCH(xen_save_fl_direct)
if so.
*/
ENTRY(xen_restore_fl_direct)
+ BUG
+
testb $X86_EFLAGS_IF>>8, %ah
setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
/* Preempt here doesn't matter because that will deal with
@@ -133,7 +148,6 @@ check_events:
pop %rcx
pop %rax
ret
-#endif
ENTRY(xen_adjust_exception_frame)
mov 8+0(%rsp),%rcx
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 273a944..bf6d355 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -254,6 +254,7 @@ static char *pm_verb(int event)
static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info)
{
+ check_for_bios_corruption();
dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event),
((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ?
", may wakeup" : "");
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298..b697a13 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -210,143 +210,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
/*-------------------------------------------------------------------------*/
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- */
- u32 hc_capbase;
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
- u8 portroute [8]; /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
- /* USBCMD: offset 0x00 */
- u32 command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved [9];
-
- /* CONFIGFLAG: offset 0x40 */
- u32 configured_flag;
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
- /* PORTSC: offset 0x44 */
- u32 port_status [0]; /* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF (0<<14)
-#define PORT_LED_AMBER (1<<14)
-#define PORT_LED_GREEN (2<<14)
-#define PORT_LED_MASK (3<<14)
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_OCC (1<<5) /* over current change */
-#define PORT_OC (1<<4) /* over current active */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE 0x68 /* USB Device mode */
-#define USBMODE_SDIS (1<<3) /* Stream disable */
-#define USBMODE_BE (1<<2) /* BE/LE endianness select */
-#define USBMODE_CM_HC (3<<0) /* host controller mode */
-#define USBMODE_CM_IDLE (0<<0) /* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 70d135e..3773d7d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -678,7 +678,6 @@ config FB_VESA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -1583,7 +1582,6 @@ config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
graphics core integrated in the VIA VT8601A North Bridge,
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 06f87b0..2f50a80 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -43,22 +43,6 @@ config VGACON_SOFT_SCROLLBACK_SIZE
buffer. Each 64KB will give you approximately 16 80x25
screenfuls of scrollback buffer
-config VIDEO_SELECT
- bool "Video mode selection support"
- depends on X86 && VGA_CONSOLE
- ---help---
- This enables support for text mode selection on kernel startup. If
- you want to take advantage of some high-resolution text mode your
- card's BIOS offers, but the traditional Linux utilities like
- SVGATextMode don't, you can say Y here and set the mode using the
- "vga=" option from your boot loader (lilo or loadlin) or set
- "vga=ask" which brings up a video mode menu on kernel startup. (Try
- "man bootparam" or see the documentation of your boot loader about
- how to pass options to the kernel.)
-
- Read the file <file:Documentation/svga.txt> for more information
- about the Video mode selection support. If unsure, say N.
-
config MDA_CONSOLE
depends on !M68K && !PARISC && ISA
tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index a51f3e1..8c83abc 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -53,7 +53,6 @@
#include <asm/tlb.h>
#include <xen/interface/memory.h>
-#include <xen/balloon.h>
#include <xen/xenbus.h>
#include <xen/features.h>
#include <xen/page.h>
diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h
index 825de5d..1d63bd5 100644
--- a/include/asm-x86/boot.h
+++ b/include/asm-x86/boot.h
@@ -2,9 +2,7 @@
#define ASM_X86__BOOT_H
/* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG 0x9000
#define DEF_SYSSEG 0x1000
-#define DEF_SETUPSEG 0x9020
#define DEF_SYSSIZE 0x7F00
/* Internal svga startup constants */
diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h
new file mode 100644
index 0000000..62c793b
--- /dev/null
+++ b/include/asm-x86/microcode.h
@@ -0,0 +1,47 @@
+#ifndef ASM_X86__MICROCODE_H
+#define ASM_X86__MICROCODE_H
+
+struct cpu_signature {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int rev;
+};
+
+struct device;
+
+struct microcode_ops {
+ int (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+ int (*request_microcode_fw) (int cpu, struct device *device);
+
+ void (*apply_microcode) (int cpu);
+
+ int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+ void (*microcode_fini_cpu) (int cpu);
+};
+
+struct ucode_cpu_info {
+ struct cpu_signature cpu_sig;
+ int valid;
+ void *mc;
+};
+extern struct ucode_cpu_info ucode_cpu_info[];
+
+#ifdef CONFIG_MICROCODE_INTEL
+extern struct microcode_ops * __init init_intel_microcode(void);
+#else
+static inline struct microcode_ops * __init init_intel_microcode(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_MICROCODE_INTEL */
+
+#ifdef CONFIG_MICROCODE_AMD
+extern struct microcode_ops * __init init_amd_microcode(void);
+#else
+static inline struct microcode_ops * __init init_amd_microcode(void)
+{
+ return NULL;
+}
+#endif
+
+#endif /* ASM_X86__MICROCODE_H */
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index c7d3546..ee7cbb3 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -586,41 +586,6 @@ static inline void clear_in_cr4(unsigned long mask)
write_cr4(cr4);
}
-struct microcode_header {
- unsigned int hdrver;
- unsigned int rev;
- unsigned int date;
- unsigned int sig;
- unsigned int cksum;
- unsigned int ldrver;
- unsigned int pf;
- unsigned int datasize;
- unsigned int totalsize;
- unsigned int reserved[3];
-};
-
-struct microcode {
- struct microcode_header hdr;
- unsigned int bits[0];
-};
-
-typedef struct microcode microcode_t;
-typedef struct microcode_header microcode_header_t;
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
- unsigned int sig;
- unsigned int pf;
- unsigned int cksum;
-};
-
-struct extended_sigtable {
- unsigned int count;
- unsigned int cksum;
- unsigned int reserved[3];
- struct extended_signature sigs[0];
-};
-
typedef struct {
unsigned long seg;
} mm_segment_t;
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
index ea5f0a8..5d6e694 100644
--- a/include/asm-x86/segment.h
+++ b/include/asm-x86/segment.h
@@ -131,12 +131,6 @@
* Matching rules for certain types of segments.
*/
-/* Matches only __KERNEL_CS, ignoring PnP / USER / APM segments */
-#define SEGMENT_IS_KERNEL_CODE(x) (((x) & 0xfc) == GDT_ENTRY_KERNEL_CS * 8)
-
-/* Matches __KERNEL_CS and __USER_CS (they must be 2 entries apart) */
-#define SEGMENT_IS_FLAT_CODE(x) (((x) & 0xec) == GDT_ENTRY_KERNEL_CS * 8)
-
/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
#define SEGMENT_IS_PNP_CODE(x) (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 8badab0..157ff7f 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -21,8 +21,10 @@
#ifdef CONFIG_X86_32
# define LOCK_PTR_REG "a"
+# define REG_PTR_MODE "k"
#else
# define LOCK_PTR_REG "D"
+# define REG_PTR_MODE "q"
#endif
#if defined(CONFIG_X86_32) && \
@@ -54,19 +56,7 @@
* much between them in performance though, especially as locks are out of line.
*/
#if (NR_CPUS < 256)
-static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 8) & 0xff) != (tmp & 0xff));
-}
-
-static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 8) - tmp) & 0xff) > 1;
-}
+#define TICKET_SHIFT 8
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
@@ -89,19 +79,17 @@ static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
{
- int tmp;
- short new;
+ int tmp, new;
- asm volatile("movw %2,%w0\n\t"
+ asm volatile("movzwl %2, %0\n\t"
"cmpb %h0,%b0\n\t"
+ "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
"jne 1f\n\t"
- "movw %w0,%w1\n\t"
- "incb %h1\n\t"
LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=Q" (new), "+m" (lock->slock)
+ : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
:
: "memory", "cc");
@@ -116,19 +104,7 @@ static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
: "memory", "cc");
}
#else
-static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 16) & 0xffff) != (tmp & 0xffff));
-}
-
-static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 16) - tmp) & 0xffff) > 1;
-}
+#define TICKET_SHIFT 16
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
@@ -146,7 +122,7 @@ static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
/* don't need lfence here, because loads are in-order */
"jmp 1b\n"
"2:"
- : "+Q" (inc), "+m" (lock->slock), "=r" (tmp)
+ : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
:
: "memory", "cc");
}
@@ -160,13 +136,13 @@ static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
"movl %0,%1\n\t"
"roll $16, %0\n\t"
"cmpl %0,%1\n\t"
+ "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
"jne 1f\n\t"
- "addl $0x00010000, %1\n\t"
LOCK_PREFIX "cmpxchgl %1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=r" (new), "+m" (lock->slock)
+ : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
:
: "memory", "cc");
@@ -182,6 +158,20 @@ static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
}
#endif
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+ int tmp = ACCESS_ONCE(lock->slock);
+
+ return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+ int tmp = ACCESS_ONCE(lock->slock);
+
+ return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
+}
+
#ifdef CONFIG_PARAVIRT
/*
* Define virtualization-friendly old-style lock byte lock, for use in
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 75d81f1..b8fd749 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -240,6 +240,23 @@ extern const char *print_tainted(void);
extern void add_taint(unsigned);
extern int root_mountflags;
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+/*
+ * This is obviously not a great place for this, but we want to be
+ * able to scatter it around anywhere in the kernel.
+ */
+void check_for_bios_corruption(void);
+void start_periodic_check_for_corruption(void);
+#else
+static inline void check_for_bios_corruption(void)
+{
+}
+
+static inline void start_periodic_check_for_corruption(void)
+{
+}
+#endif
+
/* Values used for system_state */
extern enum system_states {
SYSTEM_BOOTING,
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 0000000..5b88e36
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute [8]; /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved [9];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status [0]; /* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE 0x68 /* USB Device mode */
+#define USBMODE_SDIS (1<<3) /* Stream disable */
+#define USBMODE_BE (1<<2) /* BE/LE endianness select */
+#define USBMODE_CM_HC (3<<0) /* host controller mode */
+#define USBMODE_CM_IDLE (0<<0) /* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
deleted file mode 100644
index fe43b0f..0000000
--- a/include/xen/balloon.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/******************************************************************************
- * balloon.h
- *
- * Xen balloon driver - enables returning/claiming memory to/from Xen.
- *
- * Copyright (c) 2003, B Dragovic
- * Copyright (c) 2003-2004, M Williamson, K Fraser
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation; or, when distributed
- * separately from the Linux kernel or incorporated into other
- * software packages, subject to the following license:
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this source file (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#ifndef __XEN_BALLOON_H__
-#define __XEN_BALLOON_H__
-
-#include <linux/spinlock.h>
-
-#if 0
-/*
- * Inform the balloon driver that it should allow some slop for device-driver
- * memory activities.
- */
-void balloon_update_driver_allowance(long delta);
-
-/* Allocate/free a set of empty pages in low memory (i.e., no RAM mapped). */
-struct page **alloc_empty_pages_and_pagevec(int nr_pages);
-void free_empty_pages_and_pagevec(struct page **pagevec, int nr_pages);
-
-void balloon_release_driver_page(struct page *page);
-
-/*
- * Prevent the balloon driver from changing the memory reservation during
- * a driver critical region.
- */
-extern spinlock_t balloon_lock;
-#define balloon_lock(__flags) spin_lock_irqsave(&balloon_lock, __flags)
-#define balloon_unlock(__flags) spin_unlock_irqrestore(&balloon_lock, __flags)
-#endif
-
-#endif /* __XEN_BALLOON_H__ */
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index d64e6ba..982dcae 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -105,12 +105,12 @@ as-instr = $(call try-run,\
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
cc-option = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",y,n)
+ $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
# cc-option-align
# Prefix align with either -falign or -malign
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists