| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 10 Oct 2008 15:42:29 -0700
From: Greg KH <greg@...ah.com>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...e.de>,
Olaf Hartmann <o.hartmann@...ovital.com>,
Christoph Hellwig <hch@...radead.org>,
Dean Adams <dadams1969@...il.com>,
Victor Soriano <vjsoriano@...re.com>,
Andre-Sebastian Liebe <andre@...nse.eu>
Subject: [PATCH 05/23] Staging: add et131x network driver
From: Greg Kroah-Hartman <gregkh@...e.de>
This is a driver for the ET1310 network device.
Based on the driver found at https://sourceforge.net/projects/et131x/
Cleaned up immensely by Olaf Hartman <o.hartmann@...ovital.com> and Christoph
Hellwig <hch@...radead.org>
Note, the powermanagement options were removed from the vendor provided
driver as they did not build properly at the time.
TODO:
- kernel coding style cleanups
- forward port for latest network driver changes
- kill useless typecasts (e.g. in et1310_phy.c)
- alloc_etherdev is initializing memory with zero?!?
- add_timer call in et131x_netdev.c is correct?
- Add power saving functionality (suspend, sleep, resume)
- Implement a few more kernel Parameter (set mac )
Cc: Olaf Hartmann <o.hartmann@...ovital.com>
Cc: Christoph Hellwig <hch@...radead.org>
Cc: Dean Adams <dadams1969@...il.com>
Cc: Victor Soriano <vjsoriano@...re.com>
Cc: Andre-Sebastian Liebe <andre@...nse.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/staging/Kconfig | 1 +
drivers/staging/Makefile | 1 +
drivers/staging/et131x/Kconfig | 18 +
drivers/staging/et131x/Makefile | 18 +
drivers/staging/et131x/README | 25 +
drivers/staging/et131x/et1310_address_map.h | 2399 +++++++++++++++++++++++++++
drivers/staging/et131x/et1310_eeprom.c | 480 ++++++
drivers/staging/et131x/et1310_eeprom.h | 89 +
drivers/staging/et131x/et1310_jagcore.c | 220 +++
drivers/staging/et131x/et1310_jagcore.h | 112 ++
drivers/staging/et131x/et1310_mac.c | 792 +++++++++
drivers/staging/et131x/et1310_mac.h | 93 +
drivers/staging/et131x/et1310_phy.c | 1281 ++++++++++++++
drivers/staging/et131x/et1310_phy.h | 910 ++++++++++
drivers/staging/et131x/et1310_pm.c | 207 +++
drivers/staging/et131x/et1310_pm.h | 125 ++
drivers/staging/et131x/et1310_rx.c | 1391 ++++++++++++++++
drivers/staging/et131x/et1310_rx.h | 373 +++++
drivers/staging/et131x/et1310_tx.c | 1525 +++++++++++++++++
drivers/staging/et131x/et1310_tx.h | 242 +++
drivers/staging/et131x/et131x_adapter.h | 347 ++++
drivers/staging/et131x/et131x_config.c | 325 ++++
drivers/staging/et131x/et131x_config.h | 67 +
drivers/staging/et131x/et131x_debug.c | 218 +++
drivers/staging/et131x/et131x_debug.h | 201 +++
drivers/staging/et131x/et131x_defs.h | 128 ++
drivers/staging/et131x/et131x_initpci.c | 1046 ++++++++++++
drivers/staging/et131x/et131x_initpci.h | 73 +
drivers/staging/et131x/et131x_isr.c | 488 ++++++
drivers/staging/et131x/et131x_isr.h | 65 +
drivers/staging/et131x/et131x_netdev.c | 856 ++++++++++
drivers/staging/et131x/et131x_netdev.h | 64 +
drivers/staging/et131x/et131x_version.h | 81 +
33 files changed, 14261 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/et131x/Kconfig
create mode 100644 drivers/staging/et131x/Makefile
create mode 100644 drivers/staging/et131x/README
create mode 100644 drivers/staging/et131x/et1310_address_map.h
create mode 100644 drivers/staging/et131x/et1310_eeprom.c
create mode 100644 drivers/staging/et131x/et1310_eeprom.h
create mode 100644 drivers/staging/et131x/et1310_jagcore.c
create mode 100644 drivers/staging/et131x/et1310_jagcore.h
create mode 100644 drivers/staging/et131x/et1310_mac.c
create mode 100644 drivers/staging/et131x/et1310_mac.h
create mode 100644 drivers/staging/et131x/et1310_phy.c
create mode 100644 drivers/staging/et131x/et1310_phy.h
create mode 100644 drivers/staging/et131x/et1310_pm.c
create mode 100644 drivers/staging/et131x/et1310_pm.h
create mode 100644 drivers/staging/et131x/et1310_rx.c
create mode 100644 drivers/staging/et131x/et1310_rx.h
create mode 100644 drivers/staging/et131x/et1310_tx.c
create mode 100644 drivers/staging/et131x/et1310_tx.h
create mode 100644 drivers/staging/et131x/et131x_adapter.h
create mode 100644 drivers/staging/et131x/et131x_config.c
create mode 100644 drivers/staging/et131x/et131x_config.h
create mode 100644 drivers/staging/et131x/et131x_debug.c
create mode 100644 drivers/staging/et131x/et131x_debug.h
create mode 100644 drivers/staging/et131x/et131x_defs.h
create mode 100644 drivers/staging/et131x/et131x_initpci.c
create mode 100644 drivers/staging/et131x/et131x_initpci.h
create mode 100644 drivers/staging/et131x/et131x_isr.c
create mode 100644 drivers/staging/et131x/et131x_isr.h
create mode 100644 drivers/staging/et131x/et131x_netdev.c
create mode 100644 drivers/staging/et131x/et131x_netdev.h
create mode 100644 drivers/staging/et131x/et131x_version.h
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 84832fe..4c3789d 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -23,5 +23,6 @@ menuconfig STAGING
if STAGING
+source "drivers/staging/et131x/Kconfig"
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ceb0328..933b984 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -1,2 +1,3 @@
# Makefile for staging directory
+obj-$(CONFIG_ET131X) += et131x/
diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig
new file mode 100644
index 0000000..e11cf34
--- /dev/null
+++ b/drivers/staging/et131x/Kconfig
@@ -0,0 +1,18 @@
+config ET131X
+ tristate "Agere ET-1310 Gigabit Ethernet support"
+ depends on NETDEV_1000 && PCI
+ default n
+ ---help---
+ This driver supports Agere ET-1310 ethernet adapters.
+
+ To compile this driver as a module, choose M here. The module
+ will be called et131x.
+
+config ET131X_DEBUG
+ bool "Enable et131x debugging"
+ depends on ET131X
+ default n
+ ---help---
+ Say Y for detailed debug information.
+
+ If in doubt, say N.
diff --git a/drivers/staging/et131x/Makefile b/drivers/staging/et131x/Makefile
new file mode 100644
index 0000000..3ad571d
--- /dev/null
+++ b/drivers/staging/et131x/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the Agere ET-131x ethernet driver
+#
+
+obj-$(CONFIG_ET131X) += et131x.o
+
+et131x-objs := et1310_eeprom.o \
+ et1310_jagcore.o \
+ et1310_mac.o \
+ et1310_phy.o \
+ et1310_pm.o \
+ et1310_rx.o \
+ et1310_tx.o \
+ et131x_config.o \
+ et131x_debug.o \
+ et131x_initpci.o \
+ et131x_isr.o \
+ et131x_netdev.o
diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README
new file mode 100644
index 0000000..28752a5
--- /dev/null
+++ b/drivers/staging/et131x/README
@@ -0,0 +1,25 @@
+This is a driver for the ET1310 network device.
+
+Based on the driver found at https://sourceforge.net/projects/et131x/
+
+Cleaned up immensely by Olaf Hartman <o.hartmann@...ovital.com> and Christoph
+Hellwig <hch@...radead.org>
+
+Note, the powermanagement options were removed from the vendor provided
+driver as they did not build properly at the time.
+
+TODO:
+ - kernel coding style cleanups
+ - forward port for latest network driver changes
+ - kill useless typecasts (e.g. in et1310_phy.c)
+ - alloc_etherdev is initializing memory with zero?!?
+ - add_timer call in et131x_netdev.c is correct?
+ - Add power saving functionality (suspend, sleep, resume)
+ - Implement a few more kernel Parameter (set mac )
+
+Please send patches to:
+ Greg Kroah-Hartman <gregkh@...e.de>
+
+And Cc: Olaf Hartmann <o.hartmann@...ovital.com> as he has this device and can
+test any changes.
+
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
new file mode 100644
index 0000000..3c85999
--- /dev/null
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -0,0 +1,2399 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_address_map.h - Contains the register mapping for the ET1310
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_ADDRESS_MAP_H_
+#define _ET1310_ADDRESS_MAP_H_
+
+
+/* START OF GLOBAL REGISTER ADDRESS MAP */
+
+typedef union _Q_ADDR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:22; // bits 10-31
+ u32 addr:10; // bits 0-9
+#else
+ u32 addr:10; // bits 0-9
+ u32 unused:22; // bits 10-31
+#endif
+ } bits;
+} Q_ADDR_t, *PQ_ADDR_t;
+
+/*
+ * structure for tx queue start address reg in global address map
+ * located at address 0x0000
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for tx queue end address reg in global address map
+ * located at address 0x0004
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for rx queue start address reg in global address map
+ * located at address 0x0008
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for rx queue end address reg in global address map
+ * located at address 0x000C
+ * Defined earlier (Q_ADDR_t)
+ */
+
+/*
+ * structure for power management control status reg in global address map
+ * located at address 0x0010
+ */
+typedef union _PM_CSR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:22; // bits 10-31
+ u32 pm_jagcore_rx_rdy:1; // bit 9
+ u32 pm_jagcore_tx_rdy:1; // bit 8
+ u32 pm_phy_lped_en:1; // bit 7
+ u32 pm_phy_sw_coma:1; // bit 6
+ u32 pm_rxclk_gate:1; // bit 5
+ u32 pm_txclk_gate:1; // bit 4
+ u32 pm_sysclk_gate:1; // bit 3
+ u32 pm_jagcore_rx_en:1; // bit 2
+ u32 pm_jagcore_tx_en:1; // bit 1
+ u32 pm_gigephy_en:1; // bit 0
+#else
+ u32 pm_gigephy_en:1; // bit 0
+ u32 pm_jagcore_tx_en:1; // bit 1
+ u32 pm_jagcore_rx_en:1; // bit 2
+ u32 pm_sysclk_gate:1; // bit 3
+ u32 pm_txclk_gate:1; // bit 4
+ u32 pm_rxclk_gate:1; // bit 5
+ u32 pm_phy_sw_coma:1; // bit 6
+ u32 pm_phy_lped_en:1; // bit 7
+ u32 pm_jagcore_tx_rdy:1; // bit 8
+ u32 pm_jagcore_rx_rdy:1; // bit 9
+ u32 unused:22; // bits 10-31
+#endif
+ } bits;
+} PM_CSR_t, *PPM_CSR_t;
+
+/*
+ * structure for interrupt status reg in global address map
+ * located at address 0x0018
+ */
+typedef union _INTERRUPT_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused5:11; // bits 21-31
+ u32 slv_timeout:1; // bit 20
+ u32 mac_stat_interrupt:1; // bit 19
+ u32 rxmac_interrupt:1; // bit 18
+ u32 txmac_interrupt:1; // bit 17
+ u32 phy_interrupt:1; // bit 16
+ u32 wake_on_lan:1; // bit 15
+ u32 watchdog_interrupt:1; // bit 14
+ u32 unused4:4; // bits 10-13
+ u32 rxdma_err:1; // bit 9
+ u32 rxdma_pkt_stat_ring_low:1; // bit 8
+ u32 rxdma_fb_ring1_low:1; // bit 7
+ u32 rxdma_fb_ring0_low:1; // bit 6
+ u32 rxdma_xfr_done:1; // bit 5
+ u32 txdma_err:1; // bit 4
+ u32 txdma_isr:1; // bit 3
+ u32 unused3:1; // bit 2
+ u32 unused2:1; // bit 1
+ u32 unused1:1; // bit 0
+#else
+ u32 unused1:1; // bit 0
+ u32 unused2:1; // bit 1
+ u32 unused3:1; // bit 2
+ u32 txdma_isr:1; // bit 3
+ u32 txdma_err:1; // bit 4
+ u32 rxdma_xfr_done:1; // bit 5
+ u32 rxdma_fb_ring0_low:1; // bit 6
+ u32 rxdma_fb_ring1_low:1; // bit 7
+ u32 rxdma_pkt_stat_ring_low:1; // bit 8
+ u32 rxdma_err:1; // bit 9
+ u32 unused4:4; // bits 10-13
+ u32 watchdog_interrupt:1; // bit 14
+ u32 wake_on_lan:1; // bit 15
+ u32 phy_interrupt:1; // bit 16
+ u32 txmac_interrupt:1; // bit 17
+ u32 rxmac_interrupt:1; // bit 18
+ u32 mac_stat_interrupt:1; // bit 19
+ u32 slv_timeout:1; // bit 20
+ u32 unused5:11; // bits 21-31
+#endif
+ } bits;
+} INTERRUPT_t, *PINTERRUPT_t;
+
+/*
+ * structure for interrupt mask reg in global address map
+ * located at address 0x001C
+ * Defined earlier (INTERRUPT_t), but 'watchdog_interrupt' is not used.
+ */
+
+/*
+ * structure for interrupt alias clear mask reg in global address map
+ * located at address 0x0020
+ * Defined earlier (INTERRUPT_t)
+ */
+
+/*
+ * structure for interrupt status alias reg in global address map
+ * located at address 0x0024
+ * Defined earlier (INTERRUPT_t)
+ */
+
+/*
+ * structure for software reset reg in global address map
+ * located at address 0x0028
+ */
+typedef union _SW_RESET_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 selfclr_disable:1; // bit 31
+ u32 unused:24; // bits 7-30
+ u32 mmc_sw_reset:1; // bit 6
+ u32 mac_stat_sw_reset:1; // bit 5
+ u32 mac_sw_reset:1; // bit 4
+ u32 rxmac_sw_reset:1; // bit 3
+ u32 txmac_sw_reset:1; // bit 2
+ u32 rxdma_sw_reset:1; // bit 1
+ u32 txdma_sw_reset:1; // bit 0
+#else
+ u32 txdma_sw_reset:1; // bit 0
+ u32 rxdma_sw_reset:1; // bit 1
+ u32 txmac_sw_reset:1; // bit 2
+ u32 rxmac_sw_reset:1; // bit 3
+ u32 mac_sw_reset:1; // bit 4
+ u32 mac_stat_sw_reset:1; // bit 5
+ u32 mmc_sw_reset:1; // bit 6
+ u32 unused:24; // bits 7-30
+ u32 selfclr_disable:1; // bit 31
+#endif
+ } bits;
+} SW_RESET_t, *PSW_RESET_t;
+
+/*
+ * structure for SLV Timer reg in global address map
+ * located at address 0x002C
+ */
+typedef union _SLV_TIMER_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:8; // bits 24-31
+ u32 timer_ini:24; // bits 0-23
+#else
+ u32 timer_ini:24; // bits 0-23
+ u32 unused:8; // bits 24-31
+#endif
+ } bits;
+} SLV_TIMER_t, *PSLV_TIMER_t;
+
+/*
+ * structure for MSI Configuration reg in global address map
+ * located at address 0x0030
+ */
+typedef union _MSI_CONFIG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused1:13; // bits 19-31
+ u32 msi_tc:3; // bits 16-18
+ u32 unused2:11; // bits 5-15
+ u32 msi_vector:5; // bits 0-4
+#else
+ u32 msi_vector:5; // bits 0-4
+ u32 unused2:11; // bits 5-15
+ u32 msi_tc:3; // bits 16-18
+ u32 unused1:13; // bits 19-31
+#endif
+ } bits;
+} MSI_CONFIG_t, *PMSI_CONFIG_t;
+
+/*
+ * structure for Loopback reg in global address map
+ * located at address 0x0034
+ */
+typedef union _LOOPBACK_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:30; // bits 2-31
+ u32 dma_loopback:1; // bit 1
+ u32 mac_loopback:1; // bit 0
+#else
+ u32 mac_loopback:1; // bit 0
+ u32 dma_loopback:1; // bit 1
+ u32 unused:30; // bits 2-31
+#endif
+ } bits;
+} LOOPBACK_t, *PLOOPBACK_t;
+
+/*
+ * GLOBAL Module of JAGCore Address Mapping
+ * Located at address 0x0000
+ */
+typedef struct _GLOBAL_t { // Location:
+ Q_ADDR_t txq_start_addr; // 0x0000
+ Q_ADDR_t txq_end_addr; // 0x0004
+ Q_ADDR_t rxq_start_addr; // 0x0008
+ Q_ADDR_t rxq_end_addr; // 0x000C
+ PM_CSR_t pm_csr; // 0x0010
+ u32 unused; // 0x0014
+ INTERRUPT_t int_status; // 0x0018
+ INTERRUPT_t int_mask; // 0x001C
+ INTERRUPT_t int_alias_clr_en; // 0x0020
+ INTERRUPT_t int_status_alias; // 0x0024
+ SW_RESET_t sw_reset; // 0x0028
+ SLV_TIMER_t slv_timer; // 0x002C
+ MSI_CONFIG_t msi_config; // 0x0030
+ LOOPBACK_t loopback; // 0x0034
+ u32 watchdog_timer; // 0x0038
+} GLOBAL_t, *PGLOBAL_t;
+
+/* END OF GLOBAL REGISTER ADDRESS MAP */
+
+
+/* START OF TXDMA REGISTER ADDRESS MAP */
+
+/*
+ * structure for txdma control status reg in txdma address map
+ * located at address 0x1000
+ */
+typedef union _TXDMA_CSR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:19; // bits 13-31
+ u32 traffic_class:4; // bits 9-12
+ u32 sngl_epkt_mode:1; // bit 8
+ u32 cache_thrshld:4; // bits 4-7
+ u32 unused1:2; // bits 2-3
+ u32 drop_TLP_disable:1; // bit 1
+ u32 halt:1; // bit 0
+#else
+ u32 halt:1; // bit 0
+ u32 drop_TLP_disable:1; // bit 1
+ u32 unused1:2; // bits 2-3
+ u32 cache_thrshld:4; // bits 4-7
+ u32 sngl_epkt_mode:1; // bit 8
+ u32 traffic_class:4; // bits 9-12
+ u32 unused2:19; // bits 13-31
+#endif
+ } bits;
+} TXDMA_CSR_t, *PTXDMA_CSR_t;
+
+/*
+ * structure for txdma packet ring base address hi reg in txdma address map
+ * located at address 0x1004
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma packet ring base address low reg in txdma address map
+ * located at address 0x1008
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma packet ring number of descriptor reg in txdma address
+ * map. Located at address 0x100C
+ */
+typedef union _TXDMA_PR_NUM_DES_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:22; // bits 10-31
+ u32 pr_ndes:10; // bits 0-9
+#else
+ u32 pr_ndes:10; // bits 0-9
+ u32 unused:22; // bits 10-31
+#endif
+ } bits;
+} TXDMA_PR_NUM_DES_t, *PTXDMA_PR_NUM_DES_t;
+
+
+typedef union _DMA10W_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:21; // bits 11-31
+ u32 wrap:1; // bit 10
+ u32 val:10; // bits 0-9
+#else
+ u32 val:10; // bits 0-9
+ u32 wrap:1; // bit 10
+ u32 unused:21; // bits 11-31
+#endif
+ } bits;
+} DMA10W_t, *PDMA10W_t;
+
+/*
+ * structure for txdma tx queue write address reg in txdma address map
+ * located at address 0x1010
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma tx queue write address external reg in txdma address map
+ * located at address 0x1014
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma tx queue read address reg in txdma address map
+ * located at address 0x1018
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma status writeback address hi reg in txdma address map
+ * located at address 0x101C
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma status writeback address lo reg in txdma address map
+ * located at address 0x1020
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for txdma service request reg in txdma address map
+ * located at address 0x1024
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for txdma service complete reg in txdma address map
+ * located at address 0x1028
+ * Defined earlier (DMA10W_t)
+ */
+
+typedef union _DMA4W_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:27; // bits 5-31
+ u32 wrap:1; // bit 4
+ u32 val:4; // bit 0-3
+#else
+ u32 val:4; // bits 0-3
+ u32 wrap:1; // bit 4
+ u32 unused:27; // bits 5-31
+#endif
+ } bits;
+} DMA4W_t, *PDMA4W_t;
+
+/*
+ * structure for txdma tx descriptor cache read index reg in txdma address map
+ * located at address 0x102C
+ * Defined earlier (DMA4W_t)
+ */
+
+/*
+ * structure for txdma tx descriptor cache write index reg in txdma address map
+ * located at address 0x1030
+ * Defined earlier (DMA4W_t)
+ */
+
+/*
+ * structure for txdma error reg in txdma address map
+ * located at address 0x1034
+ */
+typedef union _TXDMA_ERROR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused3:22; // bits 10-31
+ u32 WrbkRewind:1; // bit 9
+ u32 WrbkResend:1; // bit 8
+ u32 unused2:2; // bits 6-7
+ u32 DescrRewind:1; // bit 5
+ u32 DescrResend:1; // bit 4
+ u32 unused1:2; // bits 2-3
+ u32 PyldRewind:1; // bit 1
+ u32 PyldResend:1; // bit 0
+#else
+ u32 PyldResend:1; // bit 0
+ u32 PyldRewind:1; // bit 1
+ u32 unused1:2; // bits 2-3
+ u32 DescrResend:1; // bit 4
+ u32 DescrRewind:1; // bit 5
+ u32 unused2:2; // bits 6-7
+ u32 WrbkResend:1; // bit 8
+ u32 WrbkRewind:1; // bit 9
+ u32 unused3:22; // bits 10-31
+#endif
+ } bits;
+} TXDMA_ERROR_t, *PTXDMA_ERROR_t;
+
+/*
+ * Tx DMA Module of JAGCore Address Mapping
+ * Located at address 0x1000
+ */
+typedef struct _TXDMA_t { // Location:
+ TXDMA_CSR_t csr; // 0x1000
+ u32 pr_base_hi; // 0x1004
+ u32 pr_base_lo; // 0x1008
+ TXDMA_PR_NUM_DES_t pr_num_des; // 0x100C
+ DMA10W_t txq_wr_addr; // 0x1010
+ DMA10W_t txq_wr_addr_ext; // 0x1014
+ DMA10W_t txq_rd_addr; // 0x1018
+ u32 dma_wb_base_hi; // 0x101C
+ u32 dma_wb_base_lo; // 0x1020
+ DMA10W_t service_request; // 0x1024
+ DMA10W_t service_complete; // 0x1028
+ DMA4W_t cache_rd_index; // 0x102C
+ DMA4W_t cache_wr_index; // 0x1030
+ TXDMA_ERROR_t TxDmaError; // 0x1034
+ u32 DescAbortCount; // 0x1038
+ u32 PayloadAbortCnt; // 0x103c
+ u32 WriteBackAbortCnt; // 0x1040
+ u32 DescTimeoutCnt; // 0x1044
+ u32 PayloadTimeoutCnt; // 0x1048
+ u32 WriteBackTimeoutCnt; // 0x104c
+ u32 DescErrorCount; // 0x1050
+ u32 PayloadErrorCnt; // 0x1054
+ u32 WriteBackErrorCnt; // 0x1058
+ u32 DroppedTLPCount; // 0x105c
+ DMA10W_t NewServiceComplete; // 0x1060
+ u32 EthernetPacketCount; // 0x1064
+} TXDMA_t, *PTXDMA_t;
+
+/* END OF TXDMA REGISTER ADDRESS MAP */
+
+
+/* START OF RXDMA REGISTER ADDRESS MAP */
+
+/*
+ * structure for control status reg in rxdma address map
+ * Located at address 0x2000
+ */
+typedef union _RXDMA_CSR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:14; // bits 18-31
+ u32 halt_status:1; // bit 17
+ u32 pkt_done_flush:1; // bit 16
+ u32 pkt_drop_disable:1; // bit 15
+ u32 unused1:1; // bit 14
+ u32 fbr1_enable:1; // bit 13
+ u32 fbr1_size:2; // bits 11-12
+ u32 fbr0_enable:1; // bit 10
+ u32 fbr0_size:2; // bits 8-9
+ u32 dma_big_endian:1; // bit 7
+ u32 pkt_big_endian:1; // bit 6
+ u32 psr_big_endian:1; // bit 5
+ u32 fbr_big_endian:1; // bit 4
+ u32 tc:3; // bits 1-3
+ u32 halt:1; // bit 0
+#else
+ u32 halt:1; // bit 0
+ u32 tc:3; // bits 1-3
+ u32 fbr_big_endian:1; // bit 4
+ u32 psr_big_endian:1; // bit 5
+ u32 pkt_big_endian:1; // bit 6
+ u32 dma_big_endian:1; // bit 7
+ u32 fbr0_size:2; // bits 8-9
+ u32 fbr0_enable:1; // bit 10
+ u32 fbr1_size:2; // bits 11-12
+ u32 fbr1_enable:1; // bit 13
+ u32 unused1:1; // bit 14
+ u32 pkt_drop_disable:1; // bit 15
+ u32 pkt_done_flush:1; // bit 16
+ u32 halt_status:1; // bit 17
+ u32 unused2:14; // bits 18-31
+#endif
+ } bits;
+} RXDMA_CSR_t, *PRXDMA_CSR_t;
+
+/*
+ * structure for dma writeback lo reg in rxdma address map
+ * located at address 0x2004
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for dma writeback hi reg in rxdma address map
+ * located at address 0x2008
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for number of packets done reg in rxdma address map
+ * located at address 0x200C
+ */
+typedef union _RXDMA_NUM_PKT_DONE_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:24; // bits 8-31
+ u32 num_done:8; // bits 0-7
+#else
+ u32 num_done:8; // bits 0-7
+ u32 unused:24; // bits 8-31
+#endif
+ } bits;
+} RXDMA_NUM_PKT_DONE_t, *PRXDMA_NUM_PKT_DONE_t;
+
+/*
+ * structure for max packet time reg in rxdma address map
+ * located at address 0x2010
+ */
+typedef union _RXDMA_MAX_PKT_TIME_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:14; // bits 18-31
+ u32 time_done:18; // bits 0-17
+#else
+ u32 time_done:18; // bits 0-17
+ u32 unused:14; // bits 18-31
+#endif
+ } bits;
+} RXDMA_MAX_PKT_TIME_t, *PRXDMA_MAX_PKT_TIME_t;
+
+/*
+ * structure for rx queue read address reg in rxdma address map
+ * located at address 0x2014
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for rx queue read address external reg in rxdma address map
+ * located at address 0x2018
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for rx queue write address reg in rxdma address map
+ * located at address 0x201C
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for packet status ring base address lo reg in rxdma address map
+ * located at address 0x2020
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for packet status ring base address hi reg in rxdma address map
+ * located at address 0x2024
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for packet status ring number of descriptors reg in rxdma address
+ * map. Located at address 0x2028
+ */
+typedef union _RXDMA_PSR_NUM_DES_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:20; // bits 12-31
+ u32 psr_ndes:12; // bit 0-11
+#else
+ u32 psr_ndes:12; // bit 0-11
+ u32 unused:20; // bits 12-31
+#endif
+ } bits;
+} RXDMA_PSR_NUM_DES_t, *PRXDMA_PSR_NUM_DES_t;
+
+/*
+ * structure for packet status ring available offset reg in rxdma address map
+ * located at address 0x202C
+ */
+typedef union _RXDMA_PSR_AVAIL_OFFSET_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:19; // bits 13-31
+ u32 psr_avail_wrap:1; // bit 12
+ u32 psr_avail:12; // bit 0-11
+#else
+ u32 psr_avail:12; // bit 0-11
+ u32 psr_avail_wrap:1; // bit 12
+ u32 unused:19; // bits 13-31
+#endif
+ } bits;
+} RXDMA_PSR_AVAIL_OFFSET_t, *PRXDMA_PSR_AVAIL_OFFSET_t;
+
+/*
+ * structure for packet status ring full offset reg in rxdma address map
+ * located at address 0x2030
+ */
+typedef union _RXDMA_PSR_FULL_OFFSET_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:19; // bits 13-31
+ u32 psr_full_wrap:1; // bit 12
+ u32 psr_full:12; // bit 0-11
+#else
+ u32 psr_full:12; // bit 0-11
+ u32 psr_full_wrap:1; // bit 12
+ u32 unused:19; // bits 13-31
+#endif
+ } bits;
+} RXDMA_PSR_FULL_OFFSET_t, *PRXDMA_PSR_FULL_OFFSET_t;
+
+/*
+ * structure for packet status ring access index reg in rxdma address map
+ * located at address 0x2034
+ */
+typedef union _RXDMA_PSR_ACCESS_INDEX_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:27; // bits 5-31
+ u32 psr_ai:5; // bits 0-4
+#else
+ u32 psr_ai:5; // bits 0-4
+ u32 unused:27; // bits 5-31
+#endif
+ } bits;
+} RXDMA_PSR_ACCESS_INDEX_t, *PRXDMA_PSR_ACCESS_INDEX_t;
+
+/*
+ * structure for packet status ring minimum descriptors reg in rxdma address
+ * map. Located at address 0x2038
+ */
+typedef union _RXDMA_PSR_MIN_DES_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:20; // bits 12-31
+ u32 psr_min:12; // bits 0-11
+#else
+ u32 psr_min:12; // bits 0-11
+ u32 unused:20; // bits 12-31
+#endif
+ } bits;
+} RXDMA_PSR_MIN_DES_t, *PRXDMA_PSR_MIN_DES_t;
+
+/*
+ * structure for free buffer ring base lo address reg in rxdma address map
+ * located at address 0x203C
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for free buffer ring base hi address reg in rxdma address map
+ * located at address 0x2040
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for free buffer ring number of descriptors reg in rxdma address
+ * map. Located at address 0x2044
+ */
+typedef union _RXDMA_FBR_NUM_DES_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:22; // bits 10-31
+ u32 fbr_ndesc:10; // bits 0-9
+#else
+ u32 fbr_ndesc:10; // bits 0-9
+ u32 unused:22; // bits 10-31
+#endif
+ } bits;
+} RXDMA_FBR_NUM_DES_t, *PRXDMA_FBR_NUM_DES_t;
+
+/*
+ * structure for free buffer ring 0 available offset reg in rxdma address map
+ * located at address 0x2048
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for free buffer ring 0 full offset reg in rxdma address map
+ * located at address 0x204C
+ * Defined earlier (DMA10W_t)
+ */
+
+/*
+ * structure for free buffer cache 0 full offset reg in rxdma address map
+ * located at address 0x2050
+ */
+typedef union _RXDMA_FBC_RD_INDEX_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:27; // bits 5-31
+ u32 fbc_rdi:5; // bit 0-4
+#else
+ u32 fbc_rdi:5; // bit 0-4
+ u32 unused:27; // bits 5-31
+#endif
+ } bits;
+} RXDMA_FBC_RD_INDEX_t, *PRXDMA_FBC_RD_INDEX_t;
+
+/*
+ * structure for free buffer ring 0 minimum descriptor reg in rxdma address map
+ * located at address 0x2054
+ */
+typedef union _RXDMA_FBR_MIN_DES_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:22; // bits 10-31
+ u32 fbr_min:10; // bits 0-9
+#else
+ u32 fbr_min:10; // bits 0-9
+ u32 unused:22; // bits 10-31
+#endif
+ } bits;
+} RXDMA_FBR_MIN_DES_t, *PRXDMA_FBR_MIN_DES_t;
+
+/*
+ * structure for free buffer ring 1 base address lo reg in rxdma address map
+ * located at address 0x2058 - 0x205C
+ * Defined earlier (RXDMA_FBR_BASE_LO_t and RXDMA_FBR_BASE_HI_t)
+ */
+
+/*
+ * structure for free buffer ring 1 number of descriptors reg in rxdma address
+ * map. Located at address 0x2060
+ * Defined earlier (RXDMA_FBR_NUM_DES_t)
+ */
+
+/*
+ * structure for free buffer ring 1 available offset reg in rxdma address map
+ * located at address 0x2064
+ * Defined Earlier (RXDMA_FBR_AVAIL_OFFSET_t)
+ */
+
+/*
+ * structure for free buffer ring 1 full offset reg in rxdma address map
+ * located at address 0x2068
+ * Defined Earlier (RXDMA_FBR_FULL_OFFSET_t)
+ */
+
+/*
+ * structure for free buffer cache 1 read index reg in rxdma address map
+ * located at address 0x206C
+ * Defined Earlier (RXDMA_FBC_RD_INDEX_t)
+ */
+
+/*
+ * structure for free buffer ring 1 minimum descriptor reg in rxdma address map
+ * located at address 0x2070
+ * Defined Earlier (RXDMA_FBR_MIN_DES_t)
+ */
+
+/*
+ * Rx DMA Module of JAGCore Address Mapping
+ * Located at address 0x2000
+ */
+typedef struct _RXDMA_t { // Location:
+ RXDMA_CSR_t csr; // 0x2000
+ u32 dma_wb_base_lo; // 0x2004
+ u32 dma_wb_base_hi; // 0x2008
+ RXDMA_NUM_PKT_DONE_t num_pkt_done; // 0x200C
+ RXDMA_MAX_PKT_TIME_t max_pkt_time; // 0x2010
+ DMA10W_t rxq_rd_addr; // 0x2014
+ DMA10W_t rxq_rd_addr_ext; // 0x2018
+ DMA10W_t rxq_wr_addr; // 0x201C
+ u32 psr_base_lo; // 0x2020
+ u32 psr_base_hi; // 0x2024
+ RXDMA_PSR_NUM_DES_t psr_num_des; // 0x2028
+ RXDMA_PSR_AVAIL_OFFSET_t psr_avail_offset; // 0x202C
+ RXDMA_PSR_FULL_OFFSET_t psr_full_offset; // 0x2030
+ RXDMA_PSR_ACCESS_INDEX_t psr_access_index; // 0x2034
+ RXDMA_PSR_MIN_DES_t psr_min_des; // 0x2038
+ u32 fbr0_base_lo; // 0x203C
+ u32 fbr0_base_hi; // 0x2040
+ RXDMA_FBR_NUM_DES_t fbr0_num_des; // 0x2044
+ DMA10W_t fbr0_avail_offset; // 0x2048
+ DMA10W_t fbr0_full_offset; // 0x204C
+ RXDMA_FBC_RD_INDEX_t fbr0_rd_index; // 0x2050
+ RXDMA_FBR_MIN_DES_t fbr0_min_des; // 0x2054
+ u32 fbr1_base_lo; // 0x2058
+ u32 fbr1_base_hi; // 0x205C
+ RXDMA_FBR_NUM_DES_t fbr1_num_des; // 0x2060
+ DMA10W_t fbr1_avail_offset; // 0x2064
+ DMA10W_t fbr1_full_offset; // 0x2068
+ RXDMA_FBC_RD_INDEX_t fbr1_rd_index; // 0x206C
+ RXDMA_FBR_MIN_DES_t fbr1_min_des; // 0x2070
+} RXDMA_t, *PRXDMA_t;
+
+/* END OF RXDMA REGISTER ADDRESS MAP */
+
+
+/* START OF TXMAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for control reg in txmac address map
+ * located at address 0x3000
+ */
+typedef union _TXMAC_CTL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:24; // bits 8-31
+ u32 cklseg_diable:1; // bit 7
+ u32 ckbcnt_disable:1; // bit 6
+ u32 cksegnum:1; // bit 5
+ u32 async_disable:1; // bit 4
+ u32 fc_disable:1; // bit 3
+ u32 mcif_disable:1; // bit 2
+ u32 mif_disable:1; // bit 1
+ u32 txmac_en:1; // bit 0
+#else
+ u32 txmac_en:1; // bit 0
+ u32 mif_disable:1; // bit 1 mac interface
+ u32 mcif_disable:1; // bit 2 mem. contr. interface
+ u32 fc_disable:1; // bit 3
+ u32 async_disable:1; // bit 4
+ u32 cksegnum:1; // bit 5
+ u32 ckbcnt_disable:1; // bit 6
+ u32 cklseg_diable:1; // bit 7
+ u32 unused:24; // bits 8-31
+#endif
+ } bits;
+} TXMAC_CTL_t, *PTXMAC_CTL_t;
+
+/*
+ * structure for shadow pointer reg in txmac address map
+ * located at address 0x3004
+ */
+typedef union _TXMAC_SHADOW_PTR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:5; // bits 27-31
+ u32 txq_rd_ptr:11; // bits 16-26
+ u32 reserved:5; // bits 11-15
+ u32 txq_wr_ptr:11; // bits 0-10
+#else
+ u32 txq_wr_ptr:11; // bits 0-10
+ u32 reserved:5; // bits 11-15
+ u32 txq_rd_ptr:11; // bits 16-26
+ u32 reserved2:5; // bits 27-31
+#endif
+ } bits;
+} TXMAC_SHADOW_PTR_t, *PTXMAC_SHADOW_PTR_t;
+
+/*
+ * structure for error count reg in txmac address map
+ * located at address 0x3008
+ */
+typedef union _TXMAC_ERR_CNT_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:20; // bits 12-31
+ u32 reserved:4; // bits 8-11
+ u32 txq_underrun:4; // bits 4-7
+ u32 fifo_underrun:4; // bits 0-3
+#else
+ u32 fifo_underrun:4; // bits 0-3
+ u32 txq_underrun:4; // bits 4-7
+ u32 reserved:4; // bits 8-11
+ u32 unused:20; // bits 12-31
+#endif
+ } bits;
+} TXMAC_ERR_CNT_t, *PTXMAC_ERR_CNT_t;
+
+/*
+ * structure for max fill reg in txmac address map
+ * located at address 0x300C
+ */
+typedef union _TXMAC_MAX_FILL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:20; // bits 12-31
+ u32 max_fill:12; // bits 0-11
+#else
+ u32 max_fill:12; // bits 0-11
+ u32 unused:20; // bits 12-31
+#endif
+ } bits;
+} TXMAC_MAX_FILL_t, *PTXMAC_MAX_FILL_t;
+
+/*
+ * structure for cf parameter reg in txmac address map
+ * located at address 0x3010
+ */
+typedef union _TXMAC_CF_PARAM_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 cfep:16; // bits 16-31
+ u32 cfpt:16; // bits 0-15
+#else
+ u32 cfpt:16; // bits 0-15
+ u32 cfep:16; // bits 16-31
+#endif
+ } bits;
+} TXMAC_CF_PARAM_t, *PTXMAC_CF_PARAM_t;
+
+/*
+ * structure for tx test reg in txmac address map
+ * located at address 0x3014
+ */
+typedef union _TXMAC_TXTEST_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:15; // bits 17-31
+ u32 reserved1:1; // bit 16
+ u32 txtest_en:1; // bit 15
+ u32 unused1:4; // bits 11-14
+ u32 txqtest_ptr:11; // bits 0-11
+#else
+ u32 txqtest_ptr:11; // bits 0-10
+ u32 unused1:4; // bits 11-14
+ u32 txtest_en:1; // bit 15
+ u32 reserved1:1; // bit 16
+ u32 unused2:15; // bits 17-31
+#endif
+ } bits;
+} TXMAC_TXTEST_t, *PTXMAC_TXTEST_t;
+
+/*
+ * structure for error reg in txmac address map
+ * located at address 0x3018
+ */
+typedef union _TXMAC_ERR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:23; // bits 9-31
+ u32 fifo_underrun:1; // bit 8
+ u32 unused1:2; // bits 6-7
+ u32 ctrl2_err:1; // bit 5
+ u32 txq_underrun:1; // bit 4
+ u32 bcnt_err:1; // bit 3
+ u32 lseg_err:1; // bit 2
+ u32 segnum_err:1; // bit 1
+ u32 seg0_err:1; // bit 0
+#else
+ u32 seg0_err:1; // bit 0
+ u32 segnum_err:1; // bit 1
+ u32 lseg_err:1; // bit 2
+ u32 bcnt_err:1; // bit 3
+ u32 txq_underrun:1; // bit 4
+ u32 ctrl2_err:1; // bit 5
+ u32 unused1:2; // bits 6-7
+ u32 fifo_underrun:1; // bit 8
+ u32 unused2:23; // bits 9-31
+#endif
+ } bits;
+} TXMAC_ERR_t, *PTXMAC_ERR_t;
+
+/*
+ * structure for error interrupt reg in txmac address map
+ * located at address 0x301C
+ */
+typedef union _TXMAC_ERR_INT_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:23; // bits 9-31
+ u32 fifo_underrun:1; // bit 8
+ u32 unused1:2; // bits 6-7
+ u32 ctrl2_err:1; // bit 5
+ u32 txq_underrun:1; // bit 4
+ u32 bcnt_err:1; // bit 3
+ u32 lseg_err:1; // bit 2
+ u32 segnum_err:1; // bit 1
+ u32 seg0_err:1; // bit 0
+#else
+ u32 seg0_err:1; // bit 0
+ u32 segnum_err:1; // bit 1
+ u32 lseg_err:1; // bit 2
+ u32 bcnt_err:1; // bit 3
+ u32 txq_underrun:1; // bit 4
+ u32 ctrl2_err:1; // bit 5
+ u32 unused1:2; // bits 6-7
+ u32 fifo_underrun:1; // bit 8
+ u32 unused2:23; // bits 9-31
+#endif
+ } bits;
+} TXMAC_ERR_INT_t, *PTXMAC_ERR_INT_t;
+
+/*
+ * structure for error interrupt reg in txmac address map
+ * located at address 0x3020
+ */
+typedef union _TXMAC_CP_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:30; // bits 2-31
+ u32 bp_req:1; // bit 1
+ u32 bp_xonxoff:1; // bit 0
+#else
+ u32 bp_xonxoff:1; // bit 0
+ u32 bp_req:1; // bit 1
+ u32 unused:30; // bits 2-31
+#endif
+ } bits;
+} TXMAC_BP_CTRL_t, *PTXMAC_BP_CTRL_t;
+
+/*
+ * Tx MAC Module of JAGCore Address Mapping
+ */
+typedef struct _TXMAC_t { // Location:
+ TXMAC_CTL_t ctl; // 0x3000
+ TXMAC_SHADOW_PTR_t shadow_ptr; // 0x3004
+ TXMAC_ERR_CNT_t err_cnt; // 0x3008
+ TXMAC_MAX_FILL_t max_fill; // 0x300C
+ TXMAC_CF_PARAM_t cf_param; // 0x3010
+ TXMAC_TXTEST_t tx_test; // 0x3014
+ TXMAC_ERR_t err; // 0x3018
+ TXMAC_ERR_INT_t err_int; // 0x301C
+ TXMAC_BP_CTRL_t bp_ctrl; // 0x3020
+} TXMAC_t, *PTXMAC_t;
+
+/* END OF TXMAC REGISTER ADDRESS MAP */
+
+/* START OF RXMAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for rxmac control reg in rxmac address map
+ * located at address 0x4000
+ */
+typedef union _RXMAC_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:25; // bits 7-31
+ u32 rxmac_int_disable:1; // bit 6
+ u32 async_disable:1; // bit 5
+ u32 mif_disable:1; // bit 4
+ u32 wol_disable:1; // bit 3
+ u32 pkt_filter_disable:1; // bit 2
+ u32 mcif_disable:1; // bit 1
+ u32 rxmac_en:1; // bit 0
+#else
+ u32 rxmac_en:1; // bit 0
+ u32 mcif_disable:1; // bit 1
+ u32 pkt_filter_disable:1; // bit 2
+ u32 wol_disable:1; // bit 3
+ u32 mif_disable:1; // bit 4
+ u32 async_disable:1; // bit 5
+ u32 rxmac_int_disable:1; // bit 6
+ u32 reserved:25; // bits 7-31
+#endif
+ } bits;
+} RXMAC_CTRL_t, *PRXMAC_CTRL_t;
+
+/*
+ * structure for Wake On Lan Control and CRC 0 reg in rxmac address map
+ * located at address 0x4004
+ */
+typedef union _RXMAC_WOL_CTL_CRC0_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 crc0:16; // bits 16-31
+ u32 reserve:4; // bits 12-15
+ u32 ignore_pp:1; // bit 11
+ u32 ignore_mp:1; // bit 10
+ u32 clr_intr:1; // bit 9
+ u32 ignore_link_chg:1; // bit 8
+ u32 ignore_uni:1; // bit 7
+ u32 ignore_multi:1; // bit 6
+ u32 ignore_broad:1; // bit 5
+ u32 valid_crc4:1; // bit 4
+ u32 valid_crc3:1; // bit 3
+ u32 valid_crc2:1; // bit 2
+ u32 valid_crc1:1; // bit 1
+ u32 valid_crc0:1; // bit 0
+#else
+ u32 valid_crc0:1; // bit 0
+ u32 valid_crc1:1; // bit 1
+ u32 valid_crc2:1; // bit 2
+ u32 valid_crc3:1; // bit 3
+ u32 valid_crc4:1; // bit 4
+ u32 ignore_broad:1; // bit 5
+ u32 ignore_multi:1; // bit 6
+ u32 ignore_uni:1; // bit 7
+ u32 ignore_link_chg:1; // bit 8
+ u32 clr_intr:1; // bit 9
+ u32 ignore_mp:1; // bit 10
+ u32 ignore_pp:1; // bit 11
+ u32 reserve:4; // bits 12-15
+ u32 crc0:16; // bits 16-31
+#endif
+ } bits;
+} RXMAC_WOL_CTL_CRC0_t, *PRXMAC_WOL_CTL_CRC0_t;
+
+/*
+ * structure for CRC 1 and CRC 2 reg in rxmac address map
+ * located at address 0x4008
+ */
+typedef union _RXMAC_WOL_CRC12_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 crc2:16; // bits 16-31
+ u32 crc1:16; // bits 0-15
+#else
+ u32 crc1:16; // bits 0-15
+ u32 crc2:16; // bits 16-31
+#endif
+ } bits;
+} RXMAC_WOL_CRC12_t, *PRXMAC_WOL_CRC12_t;
+
+/*
+ * structure for CRC 3 and CRC 4 reg in rxmac address map
+ * located at address 0x400C
+ */
+typedef union _RXMAC_WOL_CRC34_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 crc4:16; // bits 16-31
+ u32 crc3:16; // bits 0-15
+#else
+ u32 crc3:16; // bits 0-15
+ u32 crc4:16; // bits 16-31
+#endif
+ } bits;
+} RXMAC_WOL_CRC34_t, *PRXMAC_WOL_CRC34_t;
+
+/*
+ * structure for Wake On Lan Source Address Lo reg in rxmac address map
+ * located at address 0x4010
+ */
+typedef union _RXMAC_WOL_SA_LO_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 sa3:8; // bits 24-31
+ u32 sa4:8; // bits 16-23
+ u32 sa5:8; // bits 8-15
+ u32 sa6:8; // bits 0-7
+#else
+ u32 sa6:8; // bits 0-7
+ u32 sa5:8; // bits 8-15
+ u32 sa4:8; // bits 16-23
+ u32 sa3:8; // bits 24-31
+#endif
+ } bits;
+} RXMAC_WOL_SA_LO_t, *PRXMAC_WOL_SA_LO_t;
+
+/*
+ * structure for Wake On Lan Source Address Hi reg in rxmac address map
+ * located at address 0x4014
+ */
+typedef union _RXMAC_WOL_SA_HI_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:16; // bits 16-31
+ u32 sa1:8; // bits 8-15
+ u32 sa2:8; // bits 0-7
+#else
+ u32 sa2:8; // bits 0-7
+ u32 sa1:8; // bits 8-15
+ u32 reserved:16; // bits 16-31
+#endif
+ } bits;
+} RXMAC_WOL_SA_HI_t, *PRXMAC_WOL_SA_HI_t;
+
+/*
+ * structure for Wake On Lan mask reg in rxmac address map
+ * located at address 0x4018 - 0x4064
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Unicast Paket Filter Address 1 reg in rxmac address map
+ * located at address 0x4068
+ */
+typedef union _RXMAC_UNI_PF_ADDR1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 addr1_3:8; // bits 24-31
+ u32 addr1_4:8; // bits 16-23
+ u32 addr1_5:8; // bits 8-15
+ u32 addr1_6:8; // bits 0-7
+#else
+ u32 addr1_6:8; // bits 0-7
+ u32 addr1_5:8; // bits 8-15
+ u32 addr1_4:8; // bits 16-23
+ u32 addr1_3:8; // bits 24-31
+#endif
+ } bits;
+} RXMAC_UNI_PF_ADDR1_t, *PRXMAC_UNI_PF_ADDR1_t;
+
+/*
+ * structure for Unicast Paket Filter Address 2 reg in rxmac address map
+ * located at address 0x406C
+ */
+typedef union _RXMAC_UNI_PF_ADDR2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 addr2_3:8; // bits 24-31
+ u32 addr2_4:8; // bits 16-23
+ u32 addr2_5:8; // bits 8-15
+ u32 addr2_6:8; // bits 0-7
+#else
+ u32 addr2_6:8; // bits 0-7
+ u32 addr2_5:8; // bits 8-15
+ u32 addr2_4:8; // bits 16-23
+ u32 addr2_3:8; // bits 24-31
+#endif
+ } bits;
+} RXMAC_UNI_PF_ADDR2_t, *PRXMAC_UNI_PF_ADDR2_t;
+
+/*
+ * structure for Unicast Paket Filter Address 1 & 2 reg in rxmac address map
+ * located at address 0x4070
+ */
+typedef union _RXMAC_UNI_PF_ADDR3_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 addr2_1:8; // bits 24-31
+ u32 addr2_2:8; // bits 16-23
+ u32 addr1_1:8; // bits 8-15
+ u32 addr1_2:8; // bits 0-7
+#else
+ u32 addr1_2:8; // bits 0-7
+ u32 addr1_1:8; // bits 8-15
+ u32 addr2_2:8; // bits 16-23
+ u32 addr2_1:8; // bits 24-31
+#endif
+ } bits;
+} RXMAC_UNI_PF_ADDR3_t, *PRXMAC_UNI_PF_ADDR3_t;
+
+/*
+ * structure for Multicast Hash reg in rxmac address map
+ * located at address 0x4074 - 0x4080
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Packet Filter Control reg in rxmac address map
+ * located at address 0x4084
+ */
+typedef union _RXMAC_PF_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused2:9; // bits 23-31
+ u32 min_pkt_size:7; // bits 16-22
+ u32 unused1:12; // bits 4-15
+ u32 filter_frag_en:1; // bit 3
+ u32 filter_uni_en:1; // bit 2
+ u32 filter_multi_en:1; // bit 1
+ u32 filter_broad_en:1; // bit 0
+#else
+ u32 filter_broad_en:1; // bit 0
+ u32 filter_multi_en:1; // bit 1
+ u32 filter_uni_en:1; // bit 2
+ u32 filter_frag_en:1; // bit 3
+ u32 unused1:12; // bits 4-15
+ u32 min_pkt_size:7; // bits 16-22
+ u32 unused2:9; // bits 23-31
+#endif
+ } bits;
+} RXMAC_PF_CTRL_t, *PRXMAC_PF_CTRL_t;
+
+/*
+ * structure for Memory Controller Interface Control Max Segment reg in rxmac
+ * address map. Located at address 0x4088
+ */
+typedef union _RXMAC_MCIF_CTRL_MAX_SEG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:22; // bits 10-31
+ u32 max_size:8; // bits 2-9
+ u32 fc_en:1; // bit 1
+ u32 seg_en:1; // bit 0
+#else
+ u32 seg_en:1; // bit 0
+ u32 fc_en:1; // bit 1
+ u32 max_size:8; // bits 2-9
+ u32 reserved:22; // bits 10-31
+#endif
+ } bits;
+} RXMAC_MCIF_CTRL_MAX_SEG_t, *PRXMAC_MCIF_CTRL_MAX_SEG_t;
+
+/*
+ * structure for Memory Controller Interface Water Mark reg in rxmac address
+ * map. Located at address 0x408C
+ */
+typedef union _RXMAC_MCIF_WATER_MARK_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:6; // bits 26-31
+ u32 mark_hi:10; // bits 16-25
+ u32 reserved1:6; // bits 10-15
+ u32 mark_lo:10; // bits 0-9
+#else
+ u32 mark_lo:10; // bits 0-9
+ u32 reserved1:6; // bits 10-15
+ u32 mark_hi:10; // bits 16-25
+ u32 reserved2:6; // bits 26-31
+#endif
+ } bits;
+} RXMAC_MCIF_WATER_MARK_t, *PRXMAC_MCIF_WATER_MARK_t;
+
+/*
+ * structure for Rx Queue Dialog reg in rxmac address map.
+ * located at address 0x4090
+ */
+typedef union _RXMAC_RXQ_DIAG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:6; // bits 26-31
+ u32 rd_ptr:10; // bits 16-25
+ u32 reserved1:6; // bits 10-15
+ u32 wr_ptr:10; // bits 0-9
+#else
+ u32 wr_ptr:10; // bits 0-9
+ u32 reserved1:6; // bits 10-15
+ u32 rd_ptr:10; // bits 16-25
+ u32 reserved2:6; // bits 26-31
+#endif
+ } bits;
+} RXMAC_RXQ_DIAG_t, *PRXMAC_RXQ_DIAG_t;
+
+/*
+ * structure for space availiable reg in rxmac address map.
+ * located at address 0x4094
+ */
+typedef union _RXMAC_SPACE_AVAIL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:15; // bits 17-31
+ u32 space_avail_en:1; // bit 16
+ u32 reserved1:6; // bits 10-15
+ u32 space_avail:10; // bits 0-9
+#else
+ u32 space_avail:10; // bits 0-9
+ u32 reserved1:6; // bits 10-15
+ u32 space_avail_en:1; // bit 16
+ u32 reserved2:15; // bits 17-31
+#endif
+ } bits;
+} RXMAC_SPACE_AVAIL_t, *PRXMAC_SPACE_AVAIL_t;
+
+/*
+ * structure for management interface reg in rxmac address map.
+ * located at address 0x4098
+ */
+typedef union _RXMAC_MIF_CTL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserve:14; // bits 18-31
+ u32 drop_pkt_en:1; // bit 17
+ u32 drop_pkt_mask:17; // bits 0-16
+#else
+ u32 drop_pkt_mask:17; // bits 0-16
+ u32 drop_pkt_en:1; // bit 17
+ u32 reserve:14; // bits 18-31
+#endif
+ } bits;
+} RXMAC_MIF_CTL_t, *PRXMAC_MIF_CTL_t;
+
+/*
+ * structure for Error reg in rxmac address map.
+ * located at address 0x409C
+ */
+typedef union _RXMAC_ERROR_REG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserve:28; // bits 4-31
+ u32 mif:1; // bit 3
+ u32 async:1; // bit 2
+ u32 pkt_filter:1; // bit 1
+ u32 mcif:1; // bit 0
+#else
+ u32 mcif:1; // bit 0
+ u32 pkt_filter:1; // bit 1
+ u32 async:1; // bit 2
+ u32 mif:1; // bit 3
+ u32 reserve:28; // bits 4-31
+#endif
+ } bits;
+} RXMAC_ERROR_REG_t, *PRXMAC_ERROR_REG_t;
+
+/*
+ * Rx MAC Module of JAGCore Address Mapping
+ */
+typedef struct _RXMAC_t { // Location:
+ RXMAC_CTRL_t ctrl; // 0x4000
+ RXMAC_WOL_CTL_CRC0_t crc0; // 0x4004
+ RXMAC_WOL_CRC12_t crc12; // 0x4008
+ RXMAC_WOL_CRC34_t crc34; // 0x400C
+ RXMAC_WOL_SA_LO_t sa_lo; // 0x4010
+ RXMAC_WOL_SA_HI_t sa_hi; // 0x4014
+ u32 mask0_word0; // 0x4018
+ u32 mask0_word1; // 0x401C
+ u32 mask0_word2; // 0x4020
+ u32 mask0_word3; // 0x4024
+ u32 mask1_word0; // 0x4028
+ u32 mask1_word1; // 0x402C
+ u32 mask1_word2; // 0x4030
+ u32 mask1_word3; // 0x4034
+ u32 mask2_word0; // 0x4038
+ u32 mask2_word1; // 0x403C
+ u32 mask2_word2; // 0x4040
+ u32 mask2_word3; // 0x4044
+ u32 mask3_word0; // 0x4048
+ u32 mask3_word1; // 0x404C
+ u32 mask3_word2; // 0x4050
+ u32 mask3_word3; // 0x4054
+ u32 mask4_word0; // 0x4058
+ u32 mask4_word1; // 0x405C
+ u32 mask4_word2; // 0x4060
+ u32 mask4_word3; // 0x4064
+ RXMAC_UNI_PF_ADDR1_t uni_pf_addr1; // 0x4068
+ RXMAC_UNI_PF_ADDR2_t uni_pf_addr2; // 0x406C
+ RXMAC_UNI_PF_ADDR3_t uni_pf_addr3; // 0x4070
+ u32 multi_hash1; // 0x4074
+ u32 multi_hash2; // 0x4078
+ u32 multi_hash3; // 0x407C
+ u32 multi_hash4; // 0x4080
+ RXMAC_PF_CTRL_t pf_ctrl; // 0x4084
+ RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; // 0x4088
+ RXMAC_MCIF_WATER_MARK_t mcif_water_mark; // 0x408C
+ RXMAC_RXQ_DIAG_t rxq_diag; // 0x4090
+ RXMAC_SPACE_AVAIL_t space_avail; // 0x4094
+
+ RXMAC_MIF_CTL_t mif_ctrl; // 0x4098
+ RXMAC_ERROR_REG_t err_reg; // 0x409C
+} RXMAC_t, *PRXMAC_t;
+
+/* END OF TXMAC REGISTER ADDRESS MAP */
+
+
+/* START OF MAC REGISTER ADDRESS MAP */
+
+/*
+ * structure for configuration #1 reg in mac address map.
+ * located at address 0x5000
+ */
+typedef union _MAC_CFG1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 soft_reset:1; // bit 31
+ u32 sim_reset:1; // bit 30
+ u32 reserved3:10; // bits 20-29
+ u32 reset_rx_mc:1; // bit 19
+ u32 reset_tx_mc:1; // bit 18
+ u32 reset_rx_fun:1; // bit 17
+ u32 reset_tx_fun:1; // bit 16
+ u32 reserved2:7; // bits 9-15
+ u32 loop_back:1; // bit 8
+ u32 reserved1:2; // bits 6-7
+ u32 rx_flow:1; // bit 5
+ u32 tx_flow:1; // bit 4
+ u32 syncd_rx_en:1; // bit 3
+ u32 rx_enable:1; // bit 2
+ u32 syncd_tx_en:1; // bit 1
+ u32 tx_enable:1; // bit 0
+#else
+ u32 tx_enable:1; // bit 0
+ u32 syncd_tx_en:1; // bit 1
+ u32 rx_enable:1; // bit 2
+ u32 syncd_rx_en:1; // bit 3
+ u32 tx_flow:1; // bit 4
+ u32 rx_flow:1; // bit 5
+ u32 reserved1:2; // bits 6-7
+ u32 loop_back:1; // bit 8
+ u32 reserved2:7; // bits 9-15
+ u32 reset_tx_fun:1; // bit 16
+ u32 reset_rx_fun:1; // bit 17
+ u32 reset_tx_mc:1; // bit 18
+ u32 reset_rx_mc:1; // bit 19
+ u32 reserved3:10; // bits 20-29
+ u32 sim_reset:1; // bit 30
+ u32 soft_reset:1; // bit 31
+#endif
+ } bits;
+} MAC_CFG1_t, *PMAC_CFG1_t;
+
+/*
+ * structure for configuration #2 reg in mac address map.
+ * located at address 0x5004
+ */
+typedef union _MAC_CFG2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved3:16; // bits 16-31
+ u32 preamble_len:4; // bits 12-15
+ u32 reserved2:2; // bits 10-11
+ u32 if_mode:2; // bits 8-9
+ u32 reserved1:2; // bits 6-7
+ u32 huge_frame:1; // bit 5
+ u32 len_check:1; // bit 4
+ u32 undefined:1; // bit 3
+ u32 pad_crc:1; // bit 2
+ u32 crc_enable:1; // bit 1
+ u32 full_duplex:1; // bit 0
+#else
+ u32 full_duplex:1; // bit 0
+ u32 crc_enable:1; // bit 1
+ u32 pad_crc:1; // bit 2
+ u32 undefined:1; // bit 3
+ u32 len_check:1; // bit 4
+ u32 huge_frame:1; // bit 5
+ u32 reserved1:2; // bits 6-7
+ u32 if_mode:2; // bits 8-9
+ u32 reserved2:2; // bits 10-11
+ u32 preamble_len:4; // bits 12-15
+ u32 reserved3:16; // bits 16-31
+#endif
+ } bits;
+} MAC_CFG2_t, *PMAC_CFG2_t;
+
+/*
+ * structure for Interpacket gap reg in mac address map.
+ * located at address 0x5008
+ */
+typedef union _MAC_IPG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:1; // bit 31
+ u32 non_B2B_ipg_1:7; // bits 24-30
+ u32 undefined2:1; // bit 23
+ u32 non_B2B_ipg_2:7; // bits 16-22
+ u32 min_ifg_enforce:8; // bits 8-15
+ u32 undefined1:1; // bit 7
+ u32 B2B_ipg:7; // bits 0-6
+#else
+ u32 B2B_ipg:7; // bits 0-6
+ u32 undefined1:1; // bit 7
+ u32 min_ifg_enforce:8; // bits 8-15
+ u32 non_B2B_ipg_2:7; // bits 16-22
+ u32 undefined2:1; // bit 23
+ u32 non_B2B_ipg_1:7; // bits 24-30
+ u32 reserved:1; // bit 31
+#endif
+ } bits;
+} MAC_IPG_t, *PMAC_IPG_t;
+
+/*
+ * structure for half duplex reg in mac address map.
+ * located at address 0x500C
+ */
+typedef union _MAC_HFDP_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:8; // bits 24-31
+ u32 alt_beb_trunc:4; // bits 23-20
+ u32 alt_beb_enable:1; // bit 19
+ u32 bp_no_backoff:1; // bit 18
+ u32 no_backoff:1; // bit 17
+ u32 excess_defer:1; // bit 16
+ u32 rexmit_max:4; // bits 12-15
+ u32 reserved1:2; // bits 10-11
+ u32 coll_window:10; // bits 0-9
+#else
+ u32 coll_window:10; // bits 0-9
+ u32 reserved1:2; // bits 10-11
+ u32 rexmit_max:4; // bits 12-15
+ u32 excess_defer:1; // bit 16
+ u32 no_backoff:1; // bit 17
+ u32 bp_no_backoff:1; // bit 18
+ u32 alt_beb_enable:1; // bit 19
+ u32 alt_beb_trunc:4; // bits 23-20
+ u32 reserved2:8; // bits 24-31
+#endif
+ } bits;
+} MAC_HFDP_t, *PMAC_HFDP_t;
+
+/*
+ * structure for Maximum Frame Length reg in mac address map.
+ * located at address 0x5010
+ */
+typedef union _MAC_MAX_FM_LEN_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:16; // bits 16-31
+ u32 max_len:16; // bits 0-15
+#else
+ u32 max_len:16; // bits 0-15
+ u32 reserved:16; // bits 16-31
+#endif
+ } bits;
+} MAC_MAX_FM_LEN_t, *PMAC_MAX_FM_LEN_t;
+
+/*
+ * structure for Reserve 1 reg in mac address map.
+ * located at address 0x5014 - 0x5018
+ * Defined earlier (u32)
+ */
+
+/*
+ * structure for Test reg in mac address map.
+ * located at address 0x501C
+ */
+typedef union _MAC_TEST_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:29; // bits 3-31
+ u32 mac_test:3; // bits 0-2
+#else
+ u32 mac_test:3; // bits 0-2
+ u32 unused:29; // bits 3-31
+#endif
+ } bits;
+} MAC_TEST_t, *PMAC_TEST_t;
+
+/*
+ * structure for MII Management Configuration reg in mac address map.
+ * located at address 0x5020
+ */
+typedef union _MII_MGMT_CFG_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reset_mii_mgmt:1; // bit 31
+ u32 reserved:25; // bits 6-30
+ u32 scan_auto_incremt:1; // bit 5
+ u32 preamble_suppress:1; // bit 4
+ u32 undefined:1; // bit 3
+ u32 mgmt_clk_reset:3; // bits 0-2
+#else
+ u32 mgmt_clk_reset:3; // bits 0-2
+ u32 undefined:1; // bit 3
+ u32 preamble_suppress:1; // bit 4
+ u32 scan_auto_incremt:1; // bit 5
+ u32 reserved:25; // bits 6-30
+ u32 reset_mii_mgmt:1; // bit 31
+#endif
+ } bits;
+} MII_MGMT_CFG_t, *PMII_MGMT_CFG_t;
+
+/*
+ * structure for MII Management Command reg in mac address map.
+ * located at address 0x5024
+ */
+typedef union _MII_MGMT_CMD_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:30; // bits 2-31
+ u32 scan_cycle:1; // bit 1
+ u32 read_cycle:1; // bit 0
+#else
+ u32 read_cycle:1; // bit 0
+ u32 scan_cycle:1; // bit 1
+ u32 reserved:30; // bits 2-31
+#endif
+ } bits;
+} MII_MGMT_CMD_t, *PMII_MGMT_CMD_t;
+
+/*
+ * structure for MII Management Address reg in mac address map.
+ * located at address 0x5028
+ */
+typedef union _MII_MGMT_ADDR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved2:19; // bit 13-31
+ u32 phy_addr:5; // bits 8-12
+ u32 reserved1:3; // bits 5-7
+ u32 reg_addr:5; // bits 0-4
+#else
+ u32 reg_addr:5; // bits 0-4
+ u32 reserved1:3; // bits 5-7
+ u32 phy_addr:5; // bits 8-12
+ u32 reserved2:19; // bit 13-31
+#endif
+ } bits;
+} MII_MGMT_ADDR_t, *PMII_MGMT_ADDR_t;
+
+/*
+ * structure for MII Management Control reg in mac address map.
+ * located at address 0x502C
+ */
+typedef union _MII_MGMT_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:16; // bits 16-31
+ u32 phy_ctrl:16; // bits 0-15
+#else
+ u32 phy_ctrl:16; // bits 0-15
+ u32 reserved:16; // bits 16-31
+#endif
+ } bits;
+} MII_MGMT_CTRL_t, *PMII_MGMT_CTRL_t;
+
+/*
+ * structure for MII Management Status reg in mac address map.
+ * located at address 0x5030
+ */
+typedef union _MII_MGMT_STAT_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:16; // bits 16-31
+ u32 phy_stat:16; // bits 0-15
+#else
+ u32 phy_stat:16; // bits 0-15
+ u32 reserved:16; // bits 16-31
+#endif
+ } bits;
+} MII_MGMT_STAT_t, *PMII_MGMT_STAT_t;
+
+/*
+ * structure for MII Management Indicators reg in mac address map.
+ * located at address 0x5034
+ */
+typedef union _MII_MGMT_INDICATOR_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:29; // bits 3-31
+ u32 not_valid:1; // bit 2
+ u32 scanning:1; // bit 1
+ u32 busy:1; // bit 0
+#else
+ u32 busy:1; // bit 0
+ u32 scanning:1; // bit 1
+ u32 not_valid:1; // bit 2
+ u32 reserved:29; // bits 3-31
+#endif
+ } bits;
+} MII_MGMT_INDICATOR_t, *PMII_MGMT_INDICATOR_t;
+
+/*
+ * structure for Interface Control reg in mac address map.
+ * located at address 0x5038
+ */
+typedef union _MAC_IF_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reset_if_module:1; // bit 31
+ u32 reserved4:3; // bit 28-30
+ u32 tbi_mode:1; // bit 27
+ u32 ghd_mode:1; // bit 26
+ u32 lhd_mode:1; // bit 25
+ u32 phy_mode:1; // bit 24
+ u32 reset_per_mii:1; // bit 23
+ u32 reserved3:6; // bits 17-22
+ u32 speed:1; // bit 16
+ u32 reset_pe100x:1; // bit 15
+ u32 reserved2:4; // bits 11-14
+ u32 force_quiet:1; // bit 10
+ u32 no_cipher:1; // bit 9
+ u32 disable_link_fail:1; // bit 8
+ u32 reset_gpsi:1; // bit 7
+ u32 reserved1:6; // bits 1-6
+ u32 enab_jab_protect:1; // bit 0
+#else
+ u32 enab_jab_protect:1; // bit 0
+ u32 reserved1:6; // bits 1-6
+ u32 reset_gpsi:1; // bit 7
+ u32 disable_link_fail:1; // bit 8
+ u32 no_cipher:1; // bit 9
+ u32 force_quiet:1; // bit 10
+ u32 reserved2:4; // bits 11-14
+ u32 reset_pe100x:1; // bit 15
+ u32 speed:1; // bit 16
+ u32 reserved3:6; // bits 17-22
+ u32 reset_per_mii:1; // bit 23
+ u32 phy_mode:1; // bit 24
+ u32 lhd_mode:1; // bit 25
+ u32 ghd_mode:1; // bit 26
+ u32 tbi_mode:1; // bit 27
+ u32 reserved4:3; // bit 28-30
+ u32 reset_if_module:1; // bit 31
+#endif
+ } bits;
+} MAC_IF_CTRL_t, *PMAC_IF_CTRL_t;
+
+/*
+ * structure for Interface Status reg in mac address map.
+ * located at address 0x503C
+ */
+typedef union _MAC_IF_STAT_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:22; // bits 10-31
+ u32 excess_defer:1; // bit 9
+ u32 clash:1; // bit 8
+ u32 phy_jabber:1; // bit 7
+ u32 phy_link_ok:1; // bit 6
+ u32 phy_full_duplex:1; // bit 5
+ u32 phy_speed:1; // bit 4
+ u32 pe100x_link_fail:1; // bit 3
+ u32 pe10t_loss_carrie:1; // bit 2
+ u32 pe10t_sqe_error:1; // bit 1
+ u32 pe10t_jabber:1; // bit 0
+#else
+ u32 pe10t_jabber:1; // bit 0
+ u32 pe10t_sqe_error:1; // bit 1
+ u32 pe10t_loss_carrie:1; // bit 2
+ u32 pe100x_link_fail:1; // bit 3
+ u32 phy_speed:1; // bit 4
+ u32 phy_full_duplex:1; // bit 5
+ u32 phy_link_ok:1; // bit 6
+ u32 phy_jabber:1; // bit 7
+ u32 clash:1; // bit 8
+ u32 excess_defer:1; // bit 9
+ u32 reserved:22; // bits 10-31
+#endif
+ } bits;
+} MAC_IF_STAT_t, *PMAC_IF_STAT_t;
+
+/*
+ * structure for Mac Station Address, Part 1 reg in mac address map.
+ * located at address 0x5040
+ */
+typedef union _MAC_STATION_ADDR1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 Octet6:8; // bits 24-31
+ u32 Octet5:8; // bits 16-23
+ u32 Octet4:8; // bits 8-15
+ u32 Octet3:8; // bits 0-7
+#else
+ u32 Octet3:8; // bits 0-7
+ u32 Octet4:8; // bits 8-15
+ u32 Octet5:8; // bits 16-23
+ u32 Octet6:8; // bits 24-31
+#endif
+ } bits;
+} MAC_STATION_ADDR1_t, *PMAC_STATION_ADDR1_t;
+
+/*
+ * structure for Mac Station Address, Part 2 reg in mac address map.
+ * located at address 0x5044
+ */
+typedef union _MAC_STATION_ADDR2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 Octet2:8; // bits 24-31
+ u32 Octet1:8; // bits 16-23
+ u32 reserved:16; // bits 0-15
+#else
+ u32 reserved:16; // bit 0-15
+ u32 Octet1:8; // bits 16-23
+ u32 Octet2:8; // bits 24-31
+#endif
+ } bits;
+} MAC_STATION_ADDR2_t, *PMAC_STATION_ADDR2_t;
+
+/*
+ * MAC Module of JAGCore Address Mapping
+ */
+typedef struct _MAC_t { // Location:
+ MAC_CFG1_t cfg1; // 0x5000
+ MAC_CFG2_t cfg2; // 0x5004
+ MAC_IPG_t ipg; // 0x5008
+ MAC_HFDP_t hfdp; // 0x500C
+ MAC_MAX_FM_LEN_t max_fm_len; // 0x5010
+ u32 rsv1; // 0x5014
+ u32 rsv2; // 0x5018
+ MAC_TEST_t mac_test; // 0x501C
+ MII_MGMT_CFG_t mii_mgmt_cfg; // 0x5020
+ MII_MGMT_CMD_t mii_mgmt_cmd; // 0x5024
+ MII_MGMT_ADDR_t mii_mgmt_addr; // 0x5028
+ MII_MGMT_CTRL_t mii_mgmt_ctrl; // 0x502C
+ MII_MGMT_STAT_t mii_mgmt_stat; // 0x5030
+ MII_MGMT_INDICATOR_t mii_mgmt_indicator; // 0x5034
+ MAC_IF_CTRL_t if_ctrl; // 0x5038
+ MAC_IF_STAT_t if_stat; // 0x503C
+ MAC_STATION_ADDR1_t station_addr_1; // 0x5040
+ MAC_STATION_ADDR2_t station_addr_2; // 0x5044
+} MAC_t, *PMAC_t;
+
+/* END OF MAC REGISTER ADDRESS MAP */
+
+/* START OF MAC STAT REGISTER ADDRESS MAP */
+
+/*
+ * structure for Carry Register One and it's Mask Register reg located in mac
+ * stat address map address 0x6130 and 0x6138.
+ */
+typedef union _MAC_STAT_REG_1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 tr64:1; // bit 31
+ u32 tr127:1; // bit 30
+ u32 tr255:1; // bit 29
+ u32 tr511:1; // bit 28
+ u32 tr1k:1; // bit 27
+ u32 trmax:1; // bit 26
+ u32 trmgv:1; // bit 25
+ u32 unused:8; // bits 17-24
+ u32 rbyt:1; // bit 16
+ u32 rpkt:1; // bit 15
+ u32 rfcs:1; // bit 14
+ u32 rmca:1; // bit 13
+ u32 rbca:1; // bit 12
+ u32 rxcf:1; // bit 11
+ u32 rxpf:1; // bit 10
+ u32 rxuo:1; // bit 9
+ u32 raln:1; // bit 8
+ u32 rflr:1; // bit 7
+ u32 rcde:1; // bit 6
+ u32 rcse:1; // bit 5
+ u32 rund:1; // bit 4
+ u32 rovr:1; // bit 3
+ u32 rfrg:1; // bit 2
+ u32 rjbr:1; // bit 1
+ u32 rdrp:1; // bit 0
+#else
+ u32 rdrp:1; // bit 0
+ u32 rjbr:1; // bit 1
+ u32 rfrg:1; // bit 2
+ u32 rovr:1; // bit 3
+ u32 rund:1; // bit 4
+ u32 rcse:1; // bit 5
+ u32 rcde:1; // bit 6
+ u32 rflr:1; // bit 7
+ u32 raln:1; // bit 8
+ u32 rxuo:1; // bit 9
+ u32 rxpf:1; // bit 10
+ u32 rxcf:1; // bit 11
+ u32 rbca:1; // bit 12
+ u32 rmca:1; // bit 13
+ u32 rfcs:1; // bit 14
+ u32 rpkt:1; // bit 15
+ u32 rbyt:1; // bit 16
+ u32 unused:8; // bits 17-24
+ u32 trmgv:1; // bit 25
+ u32 trmax:1; // bit 26
+ u32 tr1k:1; // bit 27
+ u32 tr511:1; // bit 28
+ u32 tr255:1; // bit 29
+ u32 tr127:1; // bit 30
+ u32 tr64:1; // bit 31
+#endif
+ } bits;
+} MAC_STAT_REG_1_t, *PMAC_STAT_REG_1_t;
+
+/*
+ * structure for Carry Register Two Mask Register reg in mac stat address map.
+ * located at address 0x613C
+ */
+typedef union _MAC_STAT_REG_2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:12; // bit 20-31
+ u32 tjbr:1; // bit 19
+ u32 tfcs:1; // bit 18
+ u32 txcf:1; // bit 17
+ u32 tovr:1; // bit 16
+ u32 tund:1; // bit 15
+ u32 tfrg:1; // bit 14
+ u32 tbyt:1; // bit 13
+ u32 tpkt:1; // bit 12
+ u32 tmca:1; // bit 11
+ u32 tbca:1; // bit 10
+ u32 txpf:1; // bit 9
+ u32 tdfr:1; // bit 8
+ u32 tedf:1; // bit 7
+ u32 tscl:1; // bit 6
+ u32 tmcl:1; // bit 5
+ u32 tlcl:1; // bit 4
+ u32 txcl:1; // bit 3
+ u32 tncl:1; // bit 2
+ u32 tpfh:1; // bit 1
+ u32 tdrp:1; // bit 0
+#else
+ u32 tdrp:1; // bit 0
+ u32 tpfh:1; // bit 1
+ u32 tncl:1; // bit 2
+ u32 txcl:1; // bit 3
+ u32 tlcl:1; // bit 4
+ u32 tmcl:1; // bit 5
+ u32 tscl:1; // bit 6
+ u32 tedf:1; // bit 7
+ u32 tdfr:1; // bit 8
+ u32 txpf:1; // bit 9
+ u32 tbca:1; // bit 10
+ u32 tmca:1; // bit 11
+ u32 tpkt:1; // bit 12
+ u32 tbyt:1; // bit 13
+ u32 tfrg:1; // bit 14
+ u32 tund:1; // bit 15
+ u32 tovr:1; // bit 16
+ u32 txcf:1; // bit 17
+ u32 tfcs:1; // bit 18
+ u32 tjbr:1; // bit 19
+ u32 unused:12; // bit 20-31
+#endif
+ } bits;
+} MAC_STAT_REG_2_t, *PMAC_STAT_REG_2_t;
+
+/*
+ * MAC STATS Module of JAGCore Address Mapping
+ */
+typedef struct _MAC_STAT_t { // Location:
+ u32 pad[32]; // 0x6000 - 607C
+
+ // Tx/Rx 0-64 Byte Frame Counter
+ u32 TR64; // 0x6080
+
+ // Tx/Rx 65-127 Byte Frame Counter
+ u32 TR127; // 0x6084
+
+ // Tx/Rx 128-255 Byte Frame Counter
+ u32 TR255; // 0x6088
+
+ // Tx/Rx 256-511 Byte Frame Counter
+ u32 TR511; // 0x608C
+
+ // Tx/Rx 512-1023 Byte Frame Counter
+ u32 TR1K; // 0x6090
+
+ // Tx/Rx 1024-1518 Byte Frame Counter
+ u32 TRMax; // 0x6094
+
+ // Tx/Rx 1519-1522 Byte Good VLAN Frame Count
+ u32 TRMgv; // 0x6098
+
+ // Rx Byte Counter
+ u32 RByt; // 0x609C
+
+ // Rx Packet Counter
+ u32 RPkt; // 0x60A0
+
+ // Rx FCS Error Counter
+ u32 RFcs; // 0x60A4
+
+ // Rx Multicast Packet Counter
+ u32 RMca; // 0x60A8
+
+ // Rx Broadcast Packet Counter
+ u32 RBca; // 0x60AC
+
+ // Rx Control Frame Packet Counter
+ u32 RxCf; // 0x60B0
+
+ // Rx Pause Frame Packet Counter
+ u32 RxPf; // 0x60B4
+
+ // Rx Unknown OP Code Counter
+ u32 RxUo; // 0x60B8
+
+ // Rx Alignment Error Counter
+ u32 RAln; // 0x60BC
+
+ // Rx Frame Length Error Counter
+ u32 RFlr; // 0x60C0
+
+ // Rx Code Error Counter
+ u32 RCde; // 0x60C4
+
+ // Rx Carrier Sense Error Counter
+ u32 RCse; // 0x60C8
+
+ // Rx Undersize Packet Counter
+ u32 RUnd; // 0x60CC
+
+ // Rx Oversize Packet Counter
+ u32 ROvr; // 0x60D0
+
+ // Rx Fragment Counter
+ u32 RFrg; // 0x60D4
+
+ // Rx Jabber Counter
+ u32 RJbr; // 0x60D8
+
+ // Rx Drop
+ u32 RDrp; // 0x60DC
+
+ // Tx Byte Counter
+ u32 TByt; // 0x60E0
+
+ // Tx Packet Counter
+ u32 TPkt; // 0x60E4
+
+ // Tx Multicast Packet Counter
+ u32 TMca; // 0x60E8
+
+ // Tx Broadcast Packet Counter
+ u32 TBca; // 0x60EC
+
+ // Tx Pause Control Frame Counter
+ u32 TxPf; // 0x60F0
+
+ // Tx Deferral Packet Counter
+ u32 TDfr; // 0x60F4
+
+ // Tx Excessive Deferral Packet Counter
+ u32 TEdf; // 0x60F8
+
+ // Tx Single Collision Packet Counter
+ u32 TScl; // 0x60FC
+
+ // Tx Multiple Collision Packet Counter
+ u32 TMcl; // 0x6100
+
+ // Tx Late Collision Packet Counter
+ u32 TLcl; // 0x6104
+
+ // Tx Excessive Collision Packet Counter
+ u32 TXcl; // 0x6108
+
+ // Tx Total Collision Packet Counter
+ u32 TNcl; // 0x610C
+
+ // Tx Pause Frame Honored Counter
+ u32 TPfh; // 0x6110
+
+ // Tx Drop Frame Counter
+ u32 TDrp; // 0x6114
+
+ // Tx Jabber Frame Counter
+ u32 TJbr; // 0x6118
+
+ // Tx FCS Error Counter
+ u32 TFcs; // 0x611C
+
+ // Tx Control Frame Counter
+ u32 TxCf; // 0x6120
+
+ // Tx Oversize Frame Counter
+ u32 TOvr; // 0x6124
+
+ // Tx Undersize Frame Counter
+ u32 TUnd; // 0x6128
+
+ // Tx Fragments Frame Counter
+ u32 TFrg; // 0x612C
+
+ // Carry Register One Register
+ MAC_STAT_REG_1_t Carry1; // 0x6130
+
+ // Carry Register Two Register
+ MAC_STAT_REG_2_t Carry2; // 0x6134
+
+ // Carry Register One Mask Register
+ MAC_STAT_REG_1_t Carry1M; // 0x6138
+
+ // Carry Register Two Mask Register
+ MAC_STAT_REG_2_t Carry2M; // 0x613C
+} MAC_STAT_t, *PMAC_STAT_t;
+
+/* END OF MAC STAT REGISTER ADDRESS MAP */
+
+
+/* START OF MMC REGISTER ADDRESS MAP */
+
+/*
+ * structure for Main Memory Controller Control reg in mmc address map.
+ * located at address 0x7000
+ */
+typedef union _MMC_CTRL_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:25; // bits 7-31
+ u32 force_ce:1; // bit 6
+ u32 rxdma_disable:1; // bit 5
+ u32 txdma_disable:1; // bit 4
+ u32 txmac_disable:1; // bit 3
+ u32 rxmac_disable:1; // bit 2
+ u32 arb_disable:1; // bit 1
+ u32 mmc_enable:1; // bit 0
+#else
+ u32 mmc_enable:1; // bit 0
+ u32 arb_disable:1; // bit 1
+ u32 rxmac_disable:1; // bit 2
+ u32 txmac_disable:1; // bit 3
+ u32 txdma_disable:1; // bit 4
+ u32 rxdma_disable:1; // bit 5
+ u32 force_ce:1; // bit 6
+ u32 reserved:25; // bits 7-31
+#endif
+ } bits;
+} MMC_CTRL_t, *PMMC_CTRL_t;
+
+/*
+ * structure for Main Memory Controller Host Memory Access Address reg in mmc
+ * address map. Located at address 0x7004
+ */
+typedef union _MMC_SRAM_ACCESS_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 byte_enable:16; // bits 16-31
+ u32 reserved2:2; // bits 14-15
+ u32 req_addr:10; // bits 4-13
+ u32 reserved1:1; // bit 3
+ u32 is_ctrl_word:1; // bit 2
+ u32 wr_access:1; // bit 1
+ u32 req_access:1; // bit 0
+#else
+ u32 req_access:1; // bit 0
+ u32 wr_access:1; // bit 1
+ u32 is_ctrl_word:1; // bit 2
+ u32 reserved1:1; // bit 3
+ u32 req_addr:10; // bits 4-13
+ u32 reserved2:2; // bits 14-15
+ u32 byte_enable:16; // bits 16-31
+#endif
+ } bits;
+} MMC_SRAM_ACCESS_t, *PMMC_SRAM_ACCESS_t;
+
+/*
+ * structure for Main Memory Controller Host Memory Access Data reg in mmc
+ * address map. Located at address 0x7008 - 0x7014
+ * Defined earlier (u32)
+ */
+
+/*
+ * Memory Control Module of JAGCore Address Mapping
+ */
+typedef struct _MMC_t { // Location:
+ MMC_CTRL_t mmc_ctrl; // 0x7000
+ MMC_SRAM_ACCESS_t sram_access; // 0x7004
+ u32 sram_word1; // 0x7008
+ u32 sram_word2; // 0x700C
+ u32 sram_word3; // 0x7010
+ u32 sram_word4; // 0x7014
+} MMC_t, *PMMC_t;
+
+/* END OF MMC REGISTER ADDRESS MAP */
+
+
+/* START OF EXP ROM REGISTER ADDRESS MAP */
+
+/*
+ * Expansion ROM Module of JAGCore Address Mapping
+ */
+
+/* Take this out until it is not empty */
+#if 0
+typedef struct _EXP_ROM_t {
+
+} EXP_ROM_t, *PEXP_ROM_t;
+#endif
+
+/* END OF EXP ROM REGISTER ADDRESS MAP */
+
+
+/*
+ * JAGCore Address Mapping
+ */
+typedef struct _ADDRESS_MAP_t {
+ GLOBAL_t global;
+ // unused section of global address map
+ u8 unused_global[4096 - sizeof(GLOBAL_t)];
+ TXDMA_t txdma;
+ // unused section of txdma address map
+ u8 unused_txdma[4096 - sizeof(TXDMA_t)];
+ RXDMA_t rxdma;
+ // unused section of rxdma address map
+ u8 unused_rxdma[4096 - sizeof(RXDMA_t)];
+ TXMAC_t txmac;
+ // unused section of txmac address map
+ u8 unused_txmac[4096 - sizeof(TXMAC_t)];
+ RXMAC_t rxmac;
+ // unused section of rxmac address map
+ u8 unused_rxmac[4096 - sizeof(RXMAC_t)];
+ MAC_t mac;
+ // unused section of mac address map
+ u8 unused_mac[4096 - sizeof(MAC_t)];
+ MAC_STAT_t macStat;
+ // unused section of mac stat address map
+ u8 unused_mac_stat[4096 - sizeof(MAC_STAT_t)];
+ MMC_t mmc;
+ // unused section of mmc address map
+ u8 unused_mmc[4096 - sizeof(MMC_t)];
+ // unused section of address map
+ u8 unused_[1015808];
+
+/* Take this out until it is not empty */
+#if 0
+ EXP_ROM_t exp_rom;
+#endif
+
+ u8 unused_exp_rom[4096]; // MGS-size TBD
+ u8 unused__[524288]; // unused section of address map
+} ADDRESS_MAP_t, *PADDRESS_MAP_t;
+
+#endif /* _ET1310_ADDRESS_MAP_H_ */
diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c
new file mode 100644
index 0000000..c2b194e
--- /dev/null
+++ b/drivers/staging/et131x/et1310_eeprom.c
@@ -0,0 +1,480 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_eeprom.c - Code used to access the device's EEPROM
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_eeprom.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_isr.h"
+
+#include "et1310_tx.h"
+
+
+/*
+ * EEPROM Defines
+ */
+
+/* LBCIF Register Groups (addressed via 32-bit offsets) */
+#define LBCIF_DWORD0_GROUP_OFFSET 0xAC
+#define LBCIF_DWORD1_GROUP_OFFSET 0xB0
+
+/* LBCIF Registers (addressed via 8-bit offsets) */
+#define LBCIF_ADDRESS_REGISTER_OFFSET 0xAC
+#define LBCIF_DATA_REGISTER_OFFSET 0xB0
+#define LBCIF_CONTROL_REGISTER_OFFSET 0xB1
+#define LBCIF_STATUS_REGISTER_OFFSET 0xB2
+
+/* LBCIF Control Register Bits */
+#define LBCIF_CONTROL_SEQUENTIAL_READ 0x01
+#define LBCIF_CONTROL_PAGE_WRITE 0x02
+#define LBCIF_CONTROL_UNUSED1 0x04
+#define LBCIF_CONTROL_EEPROM_RELOAD 0x08
+#define LBCIF_CONTROL_UNUSED2 0x10
+#define LBCIF_CONTROL_TWO_BYTE_ADDR 0x20
+#define LBCIF_CONTROL_I2C_WRITE 0x40
+#define LBCIF_CONTROL_LBCIF_ENABLE 0x80
+
+/* LBCIF Status Register Bits */
+#define LBCIF_STATUS_PHY_QUEUE_AVAIL 0x01
+#define LBCIF_STATUS_I2C_IDLE 0x02
+#define LBCIF_STATUS_ACK_ERROR 0x04
+#define LBCIF_STATUS_GENERAL_ERROR 0x08
+#define LBCIF_STATUS_UNUSED 0x30
+#define LBCIF_STATUS_CHECKSUM_ERROR 0x40
+#define LBCIF_STATUS_EEPROM_PRESENT 0x80
+
+/* Miscellaneous Constraints */
+#define MAX_NUM_REGISTER_POLLS 1000
+#define MAX_NUM_WRITE_RETRIES 2
+
+/*
+ * Define macros that allow individual register values to be extracted from a
+ * DWORD1 register grouping
+ */
+#define EXTRACT_DATA_REGISTER(x) (uint8_t)(x & 0xFF)
+#define EXTRACT_STATUS_REGISTER(x) (uint8_t)((x >> 16) & 0xFF)
+#define EXTRACT_CONTROL_REG(x) (uint8_t)((x >> 8) & 0xFF)
+
+/**
+ * EepromWriteByte - Write a byte to the ET1310's EEPROM
+ * @pAdapter: pointer to our private adapter structure
+ * @unAddress: the address to write
+ * @bData: the value to write
+ * @unEepronId: the ID of the EEPROM
+ * @unAddressingMode: how the EEPROM is to be accessed
+ *
+ * Returns SUCCESS or FAILURE
+ */
+int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress,
+ uint8_t bData, uint32_t unEepromId,
+ uint32_t unAddressingMode)
+{
+ struct pci_dev *pdev = pAdapter->pdev;
+ int32_t nIndex;
+ int32_t nRetries;
+ int32_t nError = false;
+ int32_t nI2CWriteActive = 0;
+ int32_t nWriteSuccessful = 0;
+ uint8_t bControl;
+ uint8_t bStatus = 0;
+ uint32_t unDword1 = 0;
+ uint32_t unData = 0;
+
+ /*
+ * The following excerpt is from "Serial EEPROM HW Design
+ * Specification" Version 0.92 (9/20/2004):
+ *
+ * Single Byte Writes
+ *
+ * For an EEPROM, an I2C single byte write is defined as a START
+ * condition followed by the device address, EEPROM address, one byte
+ * of data and a STOP condition. The STOP condition will trigger the
+ * EEPROM's internally timed write cycle to the nonvolatile memory.
+ * All inputs are disabled during this write cycle and the EEPROM will
+ * not respond to any access until the internal write is complete.
+ * The steps to execute a single byte write are as follows:
+ *
+ * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
+ * bits 7,1:0 both equal to 1, at least once after reset.
+ * Subsequent operations need only to check that bits 1:0 are
+ * equal to 1 prior to starting a single byte write.
+ *
+ * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0,
+ * and bits 1:0 both =0. Bit 5 should be set according to the
+ * type of EEPROM being accessed (1=two byte addressing, 0=one
+ * byte addressing).
+ *
+ * 3. Write the address to the LBCIF Address Register.
+ *
+ * 4. Write the data to the LBCIF Data Register (the I2C write will
+ * begin).
+ *
+ * 5. Monitor bit 1:0 of the LBCIF Status Register. When bits 1:0 are
+ * both equal to 1, the I2C write has completed and the internal
+ * write cycle of the EEPROM is about to start. (bits 1:0 = 01 is
+ * a legal state while waiting from both equal to 1, but bits
+ * 1:0 = 10 is invalid and implies that something is broken).
+ *
+ * 6. Check bit 3 of the LBCIF Status Register. If equal to 1, an
+ * error has occurred.
+ *
+ * 7. Check bit 2 of the LBCIF Status Register. If equal to 1 an ACK
+ * error has occurred on the address phase of the write. This
+ * could be due to an actual hardware failure or the EEPROM may
+ * still be in its internal write cycle from a previous write.
+ * This write operation was ignored and must be repeated later.
+ *
+ * 8. Set bit 6 of the LBCIF Control Register = 0. If another write is
+ * required, go to step 1.
+ */
+
+ /* Step 1: */
+ for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+ /* Read registers grouped in DWORD1 */
+ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+ &unDword1)) {
+ nError = 1;
+ break;
+ }
+
+ bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+ if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+ bStatus & LBCIF_STATUS_I2C_IDLE) {
+ /* bits 1:0 are equal to 1 */
+ break;
+ }
+ }
+
+ if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+ return FAILURE;
+ }
+
+ /* Step 2: */
+ bControl = 0;
+ bControl |= LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE;
+
+ if (unAddressingMode == DUAL_BYTE) {
+ bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR;
+ }
+
+ if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+ bControl)) {
+ return FAILURE;
+ }
+
+ nI2CWriteActive = 1;
+
+ /* Prepare EEPROM address for Step 3 */
+ unAddress |= (unAddressingMode == DUAL_BYTE) ?
+ (unEepromId << 16) : (unEepromId << 8);
+
+ for (nRetries = 0; nRetries < MAX_NUM_WRITE_RETRIES; nRetries++) {
+ /* Step 3:*/
+ if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET,
+ unAddress)) {
+ break;
+ }
+
+ /* Step 4: */
+ if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER_OFFSET,
+ bData)) {
+ break;
+ }
+
+ /* Step 5: */
+ for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+ /* Read registers grouped in DWORD1 */
+ if (pci_read_config_dword(pdev,
+ LBCIF_DWORD1_GROUP_OFFSET,
+ &unDword1)) {
+ nError = 1;
+ break;
+ }
+
+ bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+ if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+ bStatus & LBCIF_STATUS_I2C_IDLE) {
+ /* I2C write complete */
+ break;
+ }
+ }
+
+ if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+ break;
+ }
+
+ /*
+ * Step 6: Don't break here if we are revision 1, this is
+ * so we do a blind write for load bug.
+ */
+ if (bStatus & LBCIF_STATUS_GENERAL_ERROR
+ && pAdapter->RevisionID == 0) {
+ break;
+ }
+
+ /* Step 7 */
+ if (bStatus & LBCIF_STATUS_ACK_ERROR) {
+ /*
+ * This could be due to an actual hardware failure
+ * or the EEPROM may still be in its internal write
+ * cycle from a previous write. This write operation
+ * was ignored and must be repeated later.
+ */
+ udelay(10);
+ continue;
+ }
+
+ nWriteSuccessful = 1;
+ break;
+ }
+
+ /* Step 8: */
+ udelay(10);
+ nIndex = 0;
+ while (nI2CWriteActive) {
+ bControl &= ~LBCIF_CONTROL_I2C_WRITE;
+
+ if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+ bControl)) {
+ nWriteSuccessful = 0;
+ }
+
+ /* Do read until internal ACK_ERROR goes away meaning write
+ * completed
+ */
+ do {
+ pci_write_config_dword(pdev,
+ LBCIF_ADDRESS_REGISTER_OFFSET,
+ unAddress);
+ do {
+ pci_read_config_dword(pdev,
+ LBCIF_DATA_REGISTER_OFFSET, &unData);
+ } while ((unData & 0x00010000) == 0);
+ } while (unData & 0x00040000);
+
+ bControl = EXTRACT_CONTROL_REG(unData);
+
+ if (bControl != 0xC0 || nIndex == 10000) {
+ break;
+ }
+
+ nIndex++;
+ }
+
+ return nWriteSuccessful ? SUCCESS : FAILURE;
+}
+
+/**
+ * EepromReadByte - Read a byte from the ET1310's EEPROM
+ * @pAdapter: pointer to our private adapter structure
+ * @unAddress: the address from which to read
+ * @pbData: a pointer to a byte in which to store the value of the read
+ * @unEepronId: the ID of the EEPROM
+ * @unAddressingMode: how the EEPROM is to be accessed
+ *
+ * Returns SUCCESS or FAILURE
+ */
+int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress,
+ uint8_t *pbData, uint32_t unEepromId,
+ uint32_t unAddressingMode)
+{
+ struct pci_dev *pdev = pAdapter->pdev;
+ int32_t nIndex;
+ int32_t nError = 0;
+ uint8_t bControl;
+ uint8_t bStatus = 0;
+ uint32_t unDword1 = 0;
+
+ /*
+ * The following excerpt is from "Serial EEPROM HW Design
+ * Specification" Version 0.92 (9/20/2004):
+ *
+ * Single Byte Reads
+ *
+ * A single byte read is similar to the single byte write, with the
+ * exception of the data flow:
+ *
+ * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
+ * bits 7,1:0 both equal to 1, at least once after reset.
+ * Subsequent operations need only to check that bits 1:0 are equal
+ * to 1 prior to starting a single byte read.
+ *
+ * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0,
+ * and bits 1:0 both =0. Bit 5 should be set according to the type
+ * of EEPROM being accessed (1=two byte addressing, 0=one byte
+ * addressing).
+ *
+ * 3. Write the address to the LBCIF Address Register (I2C read will
+ * begin).
+ *
+ * 4. Monitor bit 0 of the LBCIF Status Register. When =1, I2C read
+ * is complete. (if bit 1 =1 and bit 0 stays =0, a hardware failure
+ * has occurred).
+ *
+ * 5. Check bit 2 of the LBCIF Status Register. If =1, then an error
+ * has occurred. The data that has been returned from the PHY may
+ * be invalid.
+ *
+ * 6. Regardless of error status, read data byte from LBCIF Data
+ * Register. If another byte is required, go to step 1.
+ */
+
+ /* Step 1: */
+ for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+ /* Read registers grouped in DWORD1 */
+ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+ &unDword1)) {
+ nError = 1;
+ break;
+ }
+
+ bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+ if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL &&
+ bStatus & LBCIF_STATUS_I2C_IDLE) {
+ /* bits 1:0 are equal to 1 */
+ break;
+ }
+ }
+
+ if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+ return FAILURE;
+ }
+
+ /* Step 2: */
+ bControl = 0;
+ bControl |= LBCIF_CONTROL_LBCIF_ENABLE;
+
+ if (unAddressingMode == DUAL_BYTE) {
+ bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR;
+ }
+
+ if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET,
+ bControl)) {
+ return FAILURE;
+ }
+
+ /* Step 3: */
+ unAddress |= (unAddressingMode == DUAL_BYTE) ?
+ (unEepromId << 16) : (unEepromId << 8);
+
+ if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET,
+ unAddress)) {
+ return FAILURE;
+ }
+
+ /* Step 4: */
+ for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) {
+ /* Read registers grouped in DWORD1 */
+ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET,
+ &unDword1)) {
+ nError = 1;
+ break;
+ }
+
+ bStatus = EXTRACT_STATUS_REGISTER(unDword1);
+
+ if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL
+ && bStatus & LBCIF_STATUS_I2C_IDLE) {
+ /* I2C read complete */
+ break;
+ }
+ }
+
+ if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) {
+ return FAILURE;
+ }
+
+ /* Step 6: */
+ *pbData = EXTRACT_DATA_REGISTER(unDword1);
+
+ return (bStatus & LBCIF_STATUS_ACK_ERROR) ? FAILURE : SUCCESS;
+}
diff --git a/drivers/staging/et131x/et1310_eeprom.h b/drivers/staging/et131x/et1310_eeprom.h
new file mode 100644
index 0000000..9b6f8ad
--- /dev/null
+++ b/drivers/staging/et131x/et1310_eeprom.h
@@ -0,0 +1,89 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_eeprom.h - Defines, structs, enums, prototypes, etc. used for EEPROM
+ * access routines
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_EEPROM_H__
+#define __ET1310_EEPROM_H__
+
+#include "et1310_address_map.h"
+
+#ifndef SUCCESS
+#define SUCCESS 0
+#define FAILURE 1
+#endif
+
+#ifndef READ
+#define READ 0
+#define WRITE 1
+#endif
+
+#ifndef SINGLE_BYTE
+#define SINGLE_BYTE 0
+#define DUAL_BYTE 1
+#endif
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+int32_t EepromWriteByte(struct et131x_adapter *adapter, u32 unAddress,
+ u8 bData, u32 unEepromId,
+ u32 unAddressingMode);
+int32_t EepromReadByte(struct et131x_adapter *adapter, u32 unAddress,
+ u8 *pbData, u32 unEepromId,
+ u32 unAddressingMode);
+
+#endif /* _ET1310_EEPROM_H_ */
diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c
new file mode 100644
index 0000000..993b30e
--- /dev/null
+++ b/drivers/staging/et131x/et1310_jagcore.c
@@ -0,0 +1,220 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * ConfigGlobalRegs - Used to configure the global registers on the JAGCore
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigGlobalRegs(struct et131x_adapter *pAdapter)
+{
+ struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ if (pAdapter->RegistryPhyLoopbk == false) {
+ if (pAdapter->RegistryJumboPacket < 2048) {
+ /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
+ * block of RAM that the driver can split between Tx
+ * and Rx as it desires. Our default is to split it
+ * 50/50:
+ */
+ writel(0, &pGbl->rxq_start_addr.value);
+ writel(pAdapter->RegistryRxMemEnd,
+ &pGbl->rxq_end_addr.value);
+ writel(pAdapter->RegistryRxMemEnd + 1,
+ &pGbl->txq_start_addr.value);
+ writel(INTERNAL_MEM_SIZE - 1,
+ &pGbl->txq_end_addr.value);
+ } else if (pAdapter->RegistryJumboPacket < 8192) {
+ /* For jumbo packets > 2k but < 8k, split 50-50. */
+ writel(0, &pGbl->rxq_start_addr.value);
+ writel(INTERNAL_MEM_RX_OFFSET,
+ &pGbl->rxq_end_addr.value);
+ writel(INTERNAL_MEM_RX_OFFSET + 1,
+ &pGbl->txq_start_addr.value);
+ writel(INTERNAL_MEM_SIZE - 1,
+ &pGbl->txq_end_addr.value);
+ } else {
+ /* 9216 is the only packet size greater than 8k that
+ * is available. The Tx buffer has to be big enough
+ * for one whole packet on the Tx side. We'll make
+ * the Tx 9408, and give the rest to Rx
+ */
+ writel(0x0000, &pGbl->rxq_start_addr.value);
+ writel(0x01b3, &pGbl->rxq_end_addr.value);
+ writel(0x01b4, &pGbl->txq_start_addr.value);
+ writel(INTERNAL_MEM_SIZE - 1,
+ &pGbl->txq_end_addr.value);
+ }
+
+ /* Initialize the loopback register. Disable all loopbacks. */
+ writel(0, &pGbl->loopback.value);
+ } else {
+ /* For PHY Line loopback, the memory is configured as if Tx
+ * and Rx both have all the memory. This is because the
+ * RxMAC will write data into the space, and the TxMAC will
+ * read it out.
+ */
+ writel(0, &pGbl->rxq_start_addr.value);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value);
+ writel(0, &pGbl->txq_start_addr.value);
+ writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value);
+
+ /* Initialize the loopback register (MAC loopback). */
+ writel(1, &pGbl->loopback.value);
+ }
+
+ /* MSI Register */
+ writel(0, &pGbl->msi_config.value);
+
+ /* By default, disable the watchdog timer. It will be enabled when
+ * a packet is queued.
+ */
+ writel(0, &pGbl->watchdog_timer);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore
+ * @pAdapter: pointer to our adapter structure
+ */
+void ConfigMMCRegs(struct et131x_adapter *pAdapter)
+{
+ MMC_CTRL_t mmc_ctrl = { 0 };
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* All we need to do is initialize the Memory Control Register */
+ mmc_ctrl.bits.force_ce = 0x0;
+ mmc_ctrl.bits.rxdma_disable = 0x0;
+ mmc_ctrl.bits.txdma_disable = 0x0;
+ mmc_ctrl.bits.txmac_disable = 0x0;
+ mmc_ctrl.bits.rxmac_disable = 0x0;
+ mmc_ctrl.bits.arb_disable = 0x0;
+ mmc_ctrl.bits.mmc_enable = 0x1;
+
+ writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void et131x_enable_interrupts(struct et131x_adapter *adapter)
+{
+ uint32_t MaskValue;
+
+ /* Enable all global interrupts */
+ if ((adapter->FlowControl == TxOnly) || (adapter->FlowControl == Both)) {
+ MaskValue = INT_MASK_ENABLE;
+ } else {
+ MaskValue = INT_MASK_ENABLE_NO_FLOW;
+ }
+
+ if (adapter->DriverNoPhyAccess) {
+ MaskValue |= 0x10000;
+ }
+
+ adapter->CachedMaskValue.value = MaskValue;
+ writel(MaskValue, &adapter->CSRAddress->global.int_mask.value);
+}
+
+void et131x_disable_interrupts(struct et131x_adapter * adapter)
+{
+ /* Disable all global interrupts */
+ adapter->CachedMaskValue.value = INT_MASK_DISABLE;
+ writel(INT_MASK_DISABLE, &adapter->CSRAddress->global.int_mask.value);
+}
diff --git a/drivers/staging/et131x/et1310_jagcore.h b/drivers/staging/et131x/et1310_jagcore.h
new file mode 100644
index 0000000..9fc8293
--- /dev/null
+++ b/drivers/staging/et131x/et1310_jagcore.h
@@ -0,0 +1,112 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_jagcore.h - Defines, structs, enums, prototypes, etc. pertaining to
+ * the JAGCore
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_JAGCORE_H__
+#define __ET1310_JAGCORE_H__
+
+#include "et1310_address_map.h"
+
+
+#define INTERNAL_MEM_SIZE 0x400 //1024 of internal memory
+#define INTERNAL_MEM_RX_OFFSET 0x1FF //50% Tx, 50% Rx
+
+#define REGS_MAX_ARRAY 4096
+
+/*
+ * For interrupts, normal running is:
+ * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt,
+ * watchdog_interrupt & txdma_xfer_done
+ *
+ * In both cases, when flow control is enabled for either Tx or bi-direction,
+ * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the
+ * buffer rings are running low.
+ */
+#define INT_MASK_DISABLE 0xffffffff
+
+// NOTE: Masking out MAC_STAT Interrupt for now...
+//#define INT_MASK_ENABLE 0xfff6bf17
+//#define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7
+#define INT_MASK_ENABLE 0xfffebf17
+#define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7
+
+/* DATA STRUCTURES FOR DIRECT REGISTER ACCESS */
+
+typedef struct {
+ u8 bReadWrite;
+ u32 nRegCount;
+ u32 nData[REGS_MAX_ARRAY];
+ u32 nOffsets[REGS_MAX_ARRAY];
+} JAGCORE_ACCESS_REGS, *PJAGCORE_ACCESS_REGS;
+
+typedef struct {
+ u8 bReadWrite;
+ u32 nDataWidth;
+ u32 nRegCount;
+ u32 nOffsets[REGS_MAX_ARRAY];
+ u32 nData[REGS_MAX_ARRAY];
+} PCI_CFG_SPACE_REGS, *PPCI_CFG_SPACE_REGS;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void ConfigGlobalRegs(struct et131x_adapter *pAdapter);
+void ConfigMMCRegs(struct et131x_adapter *pAdapter);
+void et131x_enable_interrupts(struct et131x_adapter *adapter);
+void et131x_disable_interrupts(struct et131x_adapter *adapter);
+
+#endif /* __ET1310_JAGCORE_H__ */
diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c
new file mode 100644
index 0000000..1924968
--- /dev/null
+++ b/drivers/staging/et131x/et1310_mac.c
@@ -0,0 +1,792 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_mac.c - All code and routines pertaining to the MAC
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * ConfigMacRegs1 - Initialize the first part of MAC regs
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigMACRegs1(struct et131x_adapter *pAdapter)
+{
+ struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac;
+ MAC_STATION_ADDR1_t station1;
+ MAC_STATION_ADDR2_t station2;
+ MAC_IPG_t ipg;
+ MAC_HFDP_t hfdp;
+ MII_MGMT_CFG_t mii_mgmt_cfg;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* First we need to reset everything. Write to MAC configuration
+ * register 1 to perform reset.
+ */
+ writel(0xC00F0000, &pMac->cfg1.value);
+
+ /* Next lets configure the MAC Inter-packet gap register */
+ ipg.bits.non_B2B_ipg_1 = 0x38; // 58d
+ ipg.bits.non_B2B_ipg_2 = 0x58; // 88d
+ ipg.bits.min_ifg_enforce = 0x50; // 80d
+ ipg.bits.B2B_ipg = 0x60; // 96d
+ writel(ipg.value, &pMac->ipg.value);
+
+ /* Next lets configure the MAC Half Duplex register */
+ hfdp.bits.alt_beb_trunc = 0xA;
+ hfdp.bits.alt_beb_enable = 0x0;
+ hfdp.bits.bp_no_backoff = 0x0;
+ hfdp.bits.no_backoff = 0x0;
+ hfdp.bits.excess_defer = 0x1;
+ hfdp.bits.rexmit_max = 0xF;
+ hfdp.bits.coll_window = 0x37; // 55d
+ writel(hfdp.value, &pMac->hfdp.value);
+
+ /* Next lets configure the MAC Interface Control register */
+ writel(0, &pMac->if_ctrl.value);
+
+ /* Let's move on to setting up the mii managment configuration */
+ mii_mgmt_cfg.bits.reset_mii_mgmt = 0;
+ mii_mgmt_cfg.bits.scan_auto_incremt = 0;
+ mii_mgmt_cfg.bits.preamble_suppress = 0;
+ mii_mgmt_cfg.bits.mgmt_clk_reset = 0x7;
+ writel(mii_mgmt_cfg.value, &pMac->mii_mgmt_cfg.value);
+
+ /* Next lets configure the MAC Station Address register. These
+ * values are read from the EEPROM during initialization and stored
+ * in the adapter structure. We write what is stored in the adapter
+ * structure to the MAC Station Address registers high and low. This
+ * station address is used for generating and checking pause control
+ * packets.
+ */
+ station2.bits.Octet1 = pAdapter->CurrentAddress[0];
+ station2.bits.Octet2 = pAdapter->CurrentAddress[1];
+ station1.bits.Octet3 = pAdapter->CurrentAddress[2];
+ station1.bits.Octet4 = pAdapter->CurrentAddress[3];
+ station1.bits.Octet5 = pAdapter->CurrentAddress[4];
+ station1.bits.Octet6 = pAdapter->CurrentAddress[5];
+ writel(station1.value, &pMac->station_addr_1.value);
+ writel(station2.value, &pMac->station_addr_2.value);
+
+ /* Max ethernet packet in bytes that will passed by the mac without
+ * being truncated. Allow the MAC to pass 4 more than our max packet
+ * size. This is 4 for the Ethernet CRC.
+ *
+ * Packets larger than (RegistryJumboPacket) that do not contain a
+ * VLAN ID will be dropped by the Rx function.
+ */
+ writel(pAdapter->RegistryJumboPacket + 4, &pMac->max_fm_len.value);
+
+ /* clear out MAC config reset */
+ writel(0, &pMac->cfg1.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigMacRegs2 - Initialize the second part of MAC regs
+ * @pAdpater: pointer to our adapter structure
+ */
+void ConfigMACRegs2(struct et131x_adapter *pAdapter)
+{
+ int32_t delay = 0;
+ struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac;
+ MAC_CFG1_t cfg1;
+ MAC_CFG2_t cfg2;
+ MAC_IF_CTRL_t ifctrl;
+ TXMAC_CTL_t ctl;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ ctl.value = readl(&pAdapter->CSRAddress->txmac.ctl.value);
+ cfg1.value = readl(&pMac->cfg1.value);
+ cfg2.value = readl(&pMac->cfg2.value);
+ ifctrl.value = readl(&pMac->if_ctrl.value);
+
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+ cfg2.bits.if_mode = 0x2;
+ ifctrl.bits.phy_mode = 0x0;
+ } else {
+ cfg2.bits.if_mode = 0x1;
+ ifctrl.bits.phy_mode = 0x1;
+ }
+
+ /* We need to enable Rx/Tx */
+ cfg1.bits.rx_enable = 0x1;
+ cfg1.bits.tx_enable = 0x1;
+
+ /* Set up flow control */
+ cfg1.bits.tx_flow = 0x1;
+
+ if ((pAdapter->FlowControl == RxOnly) ||
+ (pAdapter->FlowControl == Both)) {
+ cfg1.bits.rx_flow = 0x1;
+ } else {
+ cfg1.bits.rx_flow = 0x0;
+ }
+
+ /* Initialize loop back to off */
+ cfg1.bits.loop_back = 0;
+
+ writel(cfg1.value, &pMac->cfg1.value);
+
+ /* Now we need to initialize the MAC Configuration 2 register */
+ cfg2.bits.preamble_len = 0x7;
+ cfg2.bits.huge_frame = 0x0;
+ /* LENGTH FIELD CHECKING bit4: Set this bit to cause the MAC to check
+ * the frame's length field to ensure it matches the actual data
+ * field length. Clear this bit if no length field checking is
+ * desired. Its default is 0.
+ */
+ cfg2.bits.len_check = 0x1;
+
+ if (pAdapter->RegistryPhyLoopbk == false) {
+ cfg2.bits.pad_crc = 0x1;
+ cfg2.bits.crc_enable = 0x1;
+ } else {
+ cfg2.bits.pad_crc = 0;
+ cfg2.bits.crc_enable = 0;
+ }
+
+ /* 1 - full duplex, 0 - half-duplex */
+ cfg2.bits.full_duplex = pAdapter->uiDuplexMode;
+ ifctrl.bits.ghd_mode = !pAdapter->uiDuplexMode;
+
+ writel(ifctrl.value, &pMac->if_ctrl.value);
+ writel(cfg2.value, &pMac->cfg2.value);
+
+ do {
+ udelay(10);
+ delay++;
+ cfg1.value = readl(&pMac->cfg1.value);
+ } while ((!cfg1.bits.syncd_rx_en ||
+ !cfg1.bits.syncd_tx_en) &&
+ delay < 100);
+
+ if (delay == 100) {
+ DBG_ERROR(et131x_dbginfo,
+ "Syncd bits did not respond correctly cfg1 word 0x%08x\n",
+ cfg1.value);
+ }
+
+ DBG_TRACE(et131x_dbginfo,
+ "Speed %d, Dup %d, CFG1 0x%08x, CFG2 0x%08x, if_ctrl 0x%08x\n",
+ pAdapter->uiLinkSpeed, pAdapter->uiDuplexMode,
+ readl(&pMac->cfg1.value), readl(&pMac->cfg2.value),
+ readl(&pMac->if_ctrl.value));
+
+ /* Enable TXMAC */
+ ctl.bits.txmac_en = 0x1;
+ ctl.bits.fc_disable = 0x1;
+ writel(ctl.value, &pAdapter->CSRAddress->txmac.ctl.value);
+
+ /* Ready to start the RXDMA/TXDMA engine */
+ if (!MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER)) {
+ et131x_rx_dma_enable(pAdapter);
+ et131x_tx_dma_enable(pAdapter);
+ } else {
+ DBG_WARNING(et131x_dbginfo,
+ "Didn't enable Rx/Tx due to low-power mode\n");
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigRxMacRegs(struct et131x_adapter *pAdapter)
+{
+ struct _RXMAC_t __iomem *pRxMac = &pAdapter->CSRAddress->rxmac;
+ RXMAC_WOL_SA_LO_t sa_lo;
+ RXMAC_WOL_SA_HI_t sa_hi;
+ RXMAC_PF_CTRL_t pf_ctrl = { 0 };
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Disable the MAC while it is being configured (also disable WOL) */
+ writel(0x8, &pRxMac->ctrl.value);
+
+ /* Initialize WOL to disabled. */
+ writel(0, &pRxMac->crc0.value);
+ writel(0, &pRxMac->crc12.value);
+ writel(0, &pRxMac->crc34.value);
+
+ /* We need to set the WOL mask0 - mask4 next. We initialize it to
+ * its default Values of 0x00000000 because there are not WOL masks
+ * as of this time.
+ */
+ writel(0, &pRxMac->mask0_word0);
+ writel(0, &pRxMac->mask0_word1);
+ writel(0, &pRxMac->mask0_word2);
+ writel(0, &pRxMac->mask0_word3);
+
+ writel(0, &pRxMac->mask1_word0);
+ writel(0, &pRxMac->mask1_word1);
+ writel(0, &pRxMac->mask1_word2);
+ writel(0, &pRxMac->mask1_word3);
+
+ writel(0, &pRxMac->mask2_word0);
+ writel(0, &pRxMac->mask2_word1);
+ writel(0, &pRxMac->mask2_word2);
+ writel(0, &pRxMac->mask2_word3);
+
+ writel(0, &pRxMac->mask3_word0);
+ writel(0, &pRxMac->mask3_word1);
+ writel(0, &pRxMac->mask3_word2);
+ writel(0, &pRxMac->mask3_word3);
+
+ writel(0, &pRxMac->mask4_word0);
+ writel(0, &pRxMac->mask4_word1);
+ writel(0, &pRxMac->mask4_word2);
+ writel(0, &pRxMac->mask4_word3);
+
+ /* Lets setup the WOL Source Address */
+ sa_lo.bits.sa3 = pAdapter->CurrentAddress[2];
+ sa_lo.bits.sa4 = pAdapter->CurrentAddress[3];
+ sa_lo.bits.sa5 = pAdapter->CurrentAddress[4];
+ sa_lo.bits.sa6 = pAdapter->CurrentAddress[5];
+ writel(sa_lo.value, &pRxMac->sa_lo.value);
+
+ sa_hi.bits.sa1 = pAdapter->CurrentAddress[0];
+ sa_hi.bits.sa2 = pAdapter->CurrentAddress[1];
+ writel(sa_hi.value, &pRxMac->sa_hi.value);
+
+ /* Disable all Packet Filtering */
+ writel(0, &pRxMac->pf_ctrl.value);
+
+ /* Let's initialize the Unicast Packet filtering address */
+ if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) {
+ SetupDeviceForUnicast(pAdapter);
+ pf_ctrl.bits.filter_uni_en = 1;
+ } else {
+ writel(0, &pRxMac->uni_pf_addr1.value);
+ writel(0, &pRxMac->uni_pf_addr2.value);
+ writel(0, &pRxMac->uni_pf_addr3.value);
+ }
+
+ /* Let's initialize the Multicast hash */
+ if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
+ pf_ctrl.bits.filter_multi_en = 0;
+ } else {
+ pf_ctrl.bits.filter_multi_en = 1;
+ SetupDeviceForMulticast(pAdapter);
+ }
+
+ /* Runt packet filtering. Didn't work in version A silicon. */
+ pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4;
+ pf_ctrl.bits.filter_frag_en = 1;
+
+ if (pAdapter->RegistryJumboPacket > 8192) {
+ RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg;
+
+ /* In order to transmit jumbo packets greater than 8k, the
+ * FIFO between RxMAC and RxDMA needs to be reduced in size
+ * to (16k - Jumbo packet size). In order to implement this,
+ * we must use "cut through" mode in the RxMAC, which chops
+ * packets down into segments which are (max_size * 16). In
+ * this case we selected 256 bytes, since this is the size of
+ * the PCI-Express TLP's that the 1310 uses.
+ */
+ mcif_ctrl_max_seg.bits.seg_en = 0x1;
+ mcif_ctrl_max_seg.bits.fc_en = 0x0;
+ mcif_ctrl_max_seg.bits.max_size = 0x10;
+
+ writel(mcif_ctrl_max_seg.value,
+ &pRxMac->mcif_ctrl_max_seg.value);
+ } else {
+ writel(0, &pRxMac->mcif_ctrl_max_seg.value);
+ }
+
+ /* Initialize the MCIF water marks */
+ writel(0, &pRxMac->mcif_water_mark.value);
+
+ /* Initialize the MIF control */
+ writel(0, &pRxMac->mif_ctrl.value);
+
+ /* Initialize the Space Available Register */
+ writel(0, &pRxMac->space_avail.value);
+
+ /* Initialize the the mif_ctrl register
+ * bit 3: Receive code error. One or more nibbles were signaled as
+ * errors during the reception of the packet. Clear this
+ * bit in Gigabit, set it in 100Mbit. This was derived
+ * experimentally at UNH.
+ * bit 4: Receive CRC error. The packet's CRC did not match the
+ * internally generated CRC.
+ * bit 5: Receive length check error. Indicates that frame length
+ * field value in the packet does not match the actual data
+ * byte length and is not a type field.
+ * bit 16: Receive frame truncated.
+ * bit 17: Drop packet enable
+ */
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) {
+ writel(0x30038, &pRxMac->mif_ctrl.value);
+ } else {
+ writel(0x30030, &pRxMac->mif_ctrl.value);
+ }
+
+ /* Finally we initialize RxMac to be enabled & WOL disabled. Packet
+ * filter is always enabled since it is where the runt packets are
+ * supposed to be dropped. For version A silicon, runt packet
+ * dropping doesn't work, so it is disabled in the pf_ctrl register,
+ * but we still leave the packet filter on.
+ */
+ writel(pf_ctrl.value, &pRxMac->pf_ctrl.value);
+ writel(0x9, &pRxMac->ctrl.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigTxMacRegs(struct et131x_adapter *pAdapter)
+{
+ struct _TXMAC_t __iomem *pTxMac = &pAdapter->CSRAddress->txmac;
+ TXMAC_CF_PARAM_t Local;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* We need to update the Control Frame Parameters
+ * cfpt - control frame pause timer set to 64 (0x40)
+ * cfep - control frame extended pause timer set to 0x0
+ */
+ if (pAdapter->FlowControl == None) {
+ writel(0, &pTxMac->cf_param.value);
+ } else {
+ Local.bits.cfpt = 0x40;
+ Local.bits.cfep = 0x0;
+ writel(Local.value, &pTxMac->cf_param.value);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigMacStatRegs(struct et131x_adapter *pAdapter)
+{
+ struct _MAC_STAT_t __iomem *pDevMacStat =
+ &pAdapter->CSRAddress->macStat;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Next we need to initialize all the MAC_STAT registers to zero on
+ * the device.
+ */
+ writel(0, &pDevMacStat->RFcs);
+ writel(0, &pDevMacStat->RAln);
+ writel(0, &pDevMacStat->RFlr);
+ writel(0, &pDevMacStat->RDrp);
+ writel(0, &pDevMacStat->RCde);
+ writel(0, &pDevMacStat->ROvr);
+ writel(0, &pDevMacStat->RFrg);
+
+ writel(0, &pDevMacStat->TScl);
+ writel(0, &pDevMacStat->TDfr);
+ writel(0, &pDevMacStat->TMcl);
+ writel(0, &pDevMacStat->TLcl);
+ writel(0, &pDevMacStat->TNcl);
+ writel(0, &pDevMacStat->TOvr);
+ writel(0, &pDevMacStat->TUnd);
+
+ /* Unmask any counters that we want to track the overflow of.
+ * Initially this will be all counters. It may become clear later
+ * that we do not need to track all counters.
+ */
+ {
+ MAC_STAT_REG_1_t Carry1M = { 0xffffffff };
+
+ Carry1M.bits.rdrp = 0;
+ Carry1M.bits.rjbr = 1;
+ Carry1M.bits.rfrg = 0;
+ Carry1M.bits.rovr = 0;
+ Carry1M.bits.rund = 1;
+ Carry1M.bits.rcse = 1;
+ Carry1M.bits.rcde = 0;
+ Carry1M.bits.rflr = 0;
+ Carry1M.bits.raln = 0;
+ Carry1M.bits.rxuo = 1;
+ Carry1M.bits.rxpf = 1;
+ Carry1M.bits.rxcf = 1;
+ Carry1M.bits.rbca = 1;
+ Carry1M.bits.rmca = 1;
+ Carry1M.bits.rfcs = 0;
+ Carry1M.bits.rpkt = 1;
+ Carry1M.bits.rbyt = 1;
+ Carry1M.bits.trmgv = 1;
+ Carry1M.bits.trmax = 1;
+ Carry1M.bits.tr1k = 1;
+ Carry1M.bits.tr511 = 1;
+ Carry1M.bits.tr255 = 1;
+ Carry1M.bits.tr127 = 1;
+ Carry1M.bits.tr64 = 1;
+
+ writel(Carry1M.value, &pDevMacStat->Carry1M.value);
+ }
+
+ {
+ MAC_STAT_REG_2_t Carry2M = { 0xffffffff };
+
+ Carry2M.bits.tdrp = 1;
+ Carry2M.bits.tpfh = 1;
+ Carry2M.bits.tncl = 0;
+ Carry2M.bits.txcl = 1;
+ Carry2M.bits.tlcl = 0;
+ Carry2M.bits.tmcl = 0;
+ Carry2M.bits.tscl = 0;
+ Carry2M.bits.tedf = 1;
+ Carry2M.bits.tdfr = 0;
+ Carry2M.bits.txpf = 1;
+ Carry2M.bits.tbca = 1;
+ Carry2M.bits.tmca = 1;
+ Carry2M.bits.tpkt = 1;
+ Carry2M.bits.tbyt = 1;
+ Carry2M.bits.tfrg = 1;
+ Carry2M.bits.tund = 0;
+ Carry2M.bits.tovr = 0;
+ Carry2M.bits.txcf = 1;
+ Carry2M.bits.tfcs = 1;
+ Carry2M.bits.tjbr = 1;
+
+ writel(Carry2M.value, &pDevMacStat->Carry2M.value);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void ConfigFlowControl(struct et131x_adapter * pAdapter)
+{
+ if (pAdapter->uiDuplexMode == 0) {
+ pAdapter->FlowControl = None;
+ } else {
+ char RemotePause, RemoteAsyncPause;
+
+ ET1310_PhyAccessMiBit(pAdapter,
+ TRUEPHY_BIT_READ, 5, 10, &RemotePause);
+ ET1310_PhyAccessMiBit(pAdapter,
+ TRUEPHY_BIT_READ, 5, 11,
+ &RemoteAsyncPause);
+
+ if ((RemotePause == TRUEPHY_BIT_SET) &&
+ (RemoteAsyncPause == TRUEPHY_BIT_SET)) {
+ pAdapter->FlowControl = pAdapter->RegistryFlowControl;
+ } else if ((RemotePause == TRUEPHY_BIT_SET) &&
+ (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) {
+ if (pAdapter->RegistryFlowControl == Both) {
+ pAdapter->FlowControl = Both;
+ } else {
+ pAdapter->FlowControl = None;
+ }
+ } else if ((RemotePause == TRUEPHY_BIT_CLEAR) &&
+ (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) {
+ pAdapter->FlowControl = None;
+ } else {/* if (RemotePause == TRUEPHY_CLEAR_BIT &&
+ RemoteAsyncPause == TRUEPHY_SET_BIT) */
+ if (pAdapter->RegistryFlowControl == Both) {
+ pAdapter->FlowControl = RxOnly;
+ } else {
+ pAdapter->FlowControl = None;
+ }
+ }
+ }
+}
+
+/**
+ * UpdateMacStatHostCounters - Update the local copy of the statistics
+ * @pAdapter: pointer to the adapter structure
+ */
+void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter)
+{
+ struct _ce_stats_t *stats = &pAdapter->Stats;
+ struct _MAC_STAT_t __iomem *pDevMacStat =
+ &pAdapter->CSRAddress->macStat;
+
+ stats->collisions += readl(&pDevMacStat->TNcl);
+ stats->first_collision += readl(&pDevMacStat->TScl);
+ stats->tx_deferred += readl(&pDevMacStat->TDfr);
+ stats->excessive_collisions += readl(&pDevMacStat->TMcl);
+ stats->late_collisions += readl(&pDevMacStat->TLcl);
+ stats->tx_uflo += readl(&pDevMacStat->TUnd);
+ stats->max_pkt_error += readl(&pDevMacStat->TOvr);
+
+ stats->alignment_err += readl(&pDevMacStat->RAln);
+ stats->crc_err += readl(&pDevMacStat->RCde);
+ stats->norcvbuf += readl(&pDevMacStat->RDrp);
+ stats->rx_ov_flow += readl(&pDevMacStat->ROvr);
+ stats->code_violations += readl(&pDevMacStat->RFcs);
+ stats->length_err += readl(&pDevMacStat->RFlr);
+
+ stats->other_errors += readl(&pDevMacStat->RFrg);
+}
+
+/**
+ * HandleMacStatInterrupt
+ * @pAdapter: pointer to the adapter structure
+ *
+ * One of the MACSTAT counters has wrapped. Update the local copy of
+ * the statistics held in the adapter structure, checking the "wrap"
+ * bit for each counter.
+ */
+void HandleMacStatInterrupt(struct et131x_adapter *pAdapter)
+{
+ MAC_STAT_REG_1_t Carry1;
+ MAC_STAT_REG_2_t Carry2;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Read the interrupt bits from the register(s). These are Clear On
+ * Write.
+ */
+ Carry1.value = readl(&pAdapter->CSRAddress->macStat.Carry1.value);
+ Carry2.value = readl(&pAdapter->CSRAddress->macStat.Carry2.value);
+
+ writel(Carry1.value, &pAdapter->CSRAddress->macStat.Carry1.value);
+ writel(Carry2.value, &pAdapter->CSRAddress->macStat.Carry2.value);
+
+ /* We need to do update the host copy of all the MAC_STAT counters.
+ * For each counter, check it's overflow bit. If the overflow bit is
+ * set, then increment the host version of the count by one complete
+ * revolution of the counter. This routine is called when the counter
+ * block indicates that one of the counters has wrapped.
+ */
+ if (Carry1.bits.rfcs) {
+ pAdapter->Stats.code_violations += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry1.bits.raln) {
+ pAdapter->Stats.alignment_err += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry1.bits.rflr) {
+ pAdapter->Stats.length_err += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry1.bits.rfrg) {
+ pAdapter->Stats.other_errors += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry1.bits.rcde) {
+ pAdapter->Stats.crc_err += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry1.bits.rovr) {
+ pAdapter->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry1.bits.rdrp) {
+ pAdapter->Stats.norcvbuf += COUNTER_WRAP_16_BIT;
+ }
+ if (Carry2.bits.tovr) {
+ pAdapter->Stats.max_pkt_error += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tund) {
+ pAdapter->Stats.tx_uflo += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tscl) {
+ pAdapter->Stats.first_collision += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tdfr) {
+ pAdapter->Stats.tx_deferred += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tmcl) {
+ pAdapter->Stats.excessive_collisions += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tlcl) {
+ pAdapter->Stats.late_collisions += COUNTER_WRAP_12_BIT;
+ }
+ if (Carry2.bits.tncl) {
+ pAdapter->Stats.collisions += COUNTER_WRAP_12_BIT;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void SetupDeviceForMulticast(struct et131x_adapter *pAdapter)
+{
+ struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac;
+ uint32_t nIndex;
+ uint32_t result;
+ uint32_t hash1 = 0;
+ uint32_t hash2 = 0;
+ uint32_t hash3 = 0;
+ uint32_t hash4 = 0;
+ PM_CSR_t pm_csr;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
+ * the multi-cast LIST. If it is NOT specified, (and "ALL" is not
+ * specified) then we should pass NO multi-cast addresses to the
+ * driver.
+ */
+ if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) {
+ DBG_VERBOSE(et131x_dbginfo,
+ "MULTICAST flag is set, MCCount: %d\n",
+ pAdapter->MCAddressCount);
+
+ /* Loop through our multicast array and set up the device */
+ for (nIndex = 0; nIndex < pAdapter->MCAddressCount; nIndex++) {
+ DBG_VERBOSE(et131x_dbginfo,
+ "MCList[%d]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ nIndex,
+ pAdapter->MCList[nIndex][0],
+ pAdapter->MCList[nIndex][1],
+ pAdapter->MCList[nIndex][2],
+ pAdapter->MCList[nIndex][3],
+ pAdapter->MCList[nIndex][4],
+ pAdapter->MCList[nIndex][5]);
+
+ result = ether_crc(6, pAdapter->MCList[nIndex]);
+
+ result = (result & 0x3F800000) >> 23;
+
+ if (result < 32) {
+ hash1 |= (1 << result);
+ } else if ((31 < result) && (result < 64)) {
+ result -= 32;
+ hash2 |= (1 << result);
+ } else if ((63 < result) && (result < 96)) {
+ result -= 64;
+ hash3 |= (1 << result);
+ } else {
+ result -= 96;
+ hash4 |= (1 << result);
+ }
+ }
+ }
+
+ /* Write out the new hash to the device */
+ pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+ if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ writel(hash1, &rxmac->multi_hash1);
+ writel(hash2, &rxmac->multi_hash2);
+ writel(hash3, &rxmac->multi_hash3);
+ writel(hash4, &rxmac->multi_hash4);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+void SetupDeviceForUnicast(struct et131x_adapter *pAdapter)
+{
+ struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac;
+ RXMAC_UNI_PF_ADDR1_t uni_pf1;
+ RXMAC_UNI_PF_ADDR2_t uni_pf2;
+ RXMAC_UNI_PF_ADDR3_t uni_pf3;
+ PM_CSR_t pm_csr;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Set up unicast packet filter reg 3 to be the first two octets of
+ * the MAC address for both address
+ *
+ * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
+ * MAC address for second address
+ *
+ * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
+ * MAC address for first address
+ */
+ uni_pf3.bits.addr1_1 = pAdapter->CurrentAddress[0];
+ uni_pf3.bits.addr1_2 = pAdapter->CurrentAddress[1];
+ uni_pf3.bits.addr2_1 = pAdapter->CurrentAddress[0];
+ uni_pf3.bits.addr2_2 = pAdapter->CurrentAddress[1];
+
+ uni_pf2.bits.addr2_3 = pAdapter->CurrentAddress[2];
+ uni_pf2.bits.addr2_4 = pAdapter->CurrentAddress[3];
+ uni_pf2.bits.addr2_5 = pAdapter->CurrentAddress[4];
+ uni_pf2.bits.addr2_6 = pAdapter->CurrentAddress[5];
+
+ uni_pf1.bits.addr1_3 = pAdapter->CurrentAddress[2];
+ uni_pf1.bits.addr1_4 = pAdapter->CurrentAddress[3];
+ uni_pf1.bits.addr1_5 = pAdapter->CurrentAddress[4];
+ uni_pf1.bits.addr1_6 = pAdapter->CurrentAddress[5];
+
+ pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+ if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ writel(uni_pf1.value, &rxmac->uni_pf_addr1.value);
+ writel(uni_pf2.value, &rxmac->uni_pf_addr2.value);
+ writel(uni_pf3.value, &rxmac->uni_pf_addr3.value);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
diff --git a/drivers/staging/et131x/et1310_mac.h b/drivers/staging/et131x/et1310_mac.h
new file mode 100644
index 0000000..bd26cd3
--- /dev/null
+++ b/drivers/staging/et131x/et1310_mac.h
@@ -0,0 +1,93 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_mac.h - Defines, structs, enums, prototypes, etc. pertaining to the
+ * MAC.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_MAC_H_
+#define _ET1310_MAC_H_
+
+
+#include "et1310_address_map.h"
+
+
+#define COUNTER_WRAP_28_BIT 0x10000000
+#define COUNTER_WRAP_22_BIT 0x400000
+#define COUNTER_WRAP_16_BIT 0x10000
+#define COUNTER_WRAP_12_BIT 0x1000
+
+#define COUNTER_MASK_28_BIT (COUNTER_WRAP_28_BIT - 1)
+#define COUNTER_MASK_22_BIT (COUNTER_WRAP_22_BIT - 1)
+#define COUNTER_MASK_16_BIT (COUNTER_WRAP_16_BIT - 1)
+#define COUNTER_MASK_12_BIT (COUNTER_WRAP_12_BIT - 1)
+
+#define UPDATE_COUNTER(HostCnt,DevCnt) \
+ HostCnt = HostCnt + DevCnt;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void ConfigMACRegs1(struct et131x_adapter *adapter);
+void ConfigMACRegs2(struct et131x_adapter *adapter);
+void ConfigRxMacRegs(struct et131x_adapter *adapter);
+void ConfigTxMacRegs(struct et131x_adapter *adapter);
+void ConfigMacStatRegs(struct et131x_adapter *adapter);
+void ConfigFlowControl(struct et131x_adapter *adapter);
+void UpdateMacStatHostCounters(struct et131x_adapter *adapter);
+void HandleMacStatInterrupt(struct et131x_adapter *adapter);
+void SetupDeviceForMulticast(struct et131x_adapter *adapter);
+void SetupDeviceForUnicast(struct et131x_adapter *adapter);
+
+#endif /* _ET1310_MAC_H_ */
diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c
new file mode 100644
index 0000000..6c4fa54
--- /dev/null
+++ b/drivers/staging/et131x/et1310_phy.c
@@ -0,0 +1,1281 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_phy.c - Routines for configuring and accessing the PHY
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_initpci.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Prototypes for functions with local scope */
+static int et131x_xcvr_init(struct et131x_adapter *adapter);
+
+/**
+ * PhyMiRead - Read from the PHY through the MII Interface on the MAC
+ * @adapter: pointer to our private adapter structure
+ * @xcvrAddr: the address of the transciever
+ * @xcvrReg: the register to read
+ * @value: pointer to a 16-bit value in which the value will be stored
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr,
+ uint8_t xcvrReg, uint16_t *value)
+{
+ struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac;
+ int status = 0;
+ uint32_t delay;
+ MII_MGMT_ADDR_t miiAddr;
+ MII_MGMT_CMD_t miiCmd;
+ MII_MGMT_INDICATOR_t miiIndicator;
+
+ /* Save a local copy of the registers we are dealing with so we can
+ * set them back
+ */
+ miiAddr.value = readl(&mac->mii_mgmt_addr.value);
+ miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+
+ /* Stop the current operation */
+ writel(0, &mac->mii_mgmt_cmd.value);
+
+ /* Set up the register we need to read from on the correct PHY */
+ {
+ MII_MGMT_ADDR_t mii_mgmt_addr = { 0 };
+
+ mii_mgmt_addr.bits.phy_addr = xcvrAddr;
+ mii_mgmt_addr.bits.reg_addr = xcvrReg;
+ writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
+ }
+
+ /* Kick the read cycle off */
+ delay = 0;
+
+ writel(0x1, &mac->mii_mgmt_cmd.value);
+
+ do {
+ udelay(50);
+ delay++;
+ miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
+ } while ((miiIndicator.bits.not_valid || miiIndicator.bits.busy) &&
+ delay < 50);
+
+ /* If we hit the max delay, we could not read the register */
+ if (delay >= 50) {
+ DBG_WARNING(et131x_dbginfo,
+ "xcvrReg 0x%08x could not be read\n", xcvrReg);
+ DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n",
+ miiIndicator.value);
+
+ status = -EIO;
+ }
+
+ /* If we hit here we were able to read the register and we need to
+ * return the value to the caller
+ */
+ /* TODO: make this stuff a simple readw()?! */
+ {
+ MII_MGMT_STAT_t mii_mgmt_stat;
+
+ mii_mgmt_stat.value = readl(&mac->mii_mgmt_stat.value);
+ *value = (uint16_t) mii_mgmt_stat.bits.phy_stat;
+ }
+
+ /* Stop the read operation */
+ writel(0, &mac->mii_mgmt_cmd.value);
+
+ DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, "
+ "xcvr_reg = 0x%02x, "
+ "value = 0x%04x.\n", xcvrAddr, xcvrReg, *value);
+
+ /* set the registers we touched back to the state at which we entered
+ * this function
+ */
+ writel(miiAddr.value, &mac->mii_mgmt_addr.value);
+ writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+
+ return status;
+}
+
+/**
+ * MiWrite - Write to a PHY register through the MII interface of the MAC
+ * @adapter: pointer to our private adapter structure
+ * @xcvrReg: the register to read
+ * @value: 16-bit value to write
+ *
+ * Return 0 on success, errno on failure (as defined in errno.h)
+ */
+int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value)
+{
+ struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac;
+ int status = 0;
+ uint8_t xcvrAddr = adapter->Stats.xcvr_addr;
+ uint32_t delay;
+ MII_MGMT_ADDR_t miiAddr;
+ MII_MGMT_CMD_t miiCmd;
+ MII_MGMT_INDICATOR_t miiIndicator;
+
+ /* Save a local copy of the registers we are dealing with so we can
+ * set them back
+ */
+ miiAddr.value = readl(&mac->mii_mgmt_addr.value);
+ miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+
+ /* Stop the current operation */
+ writel(0, &mac->mii_mgmt_cmd.value);
+
+ /* Set up the register we need to write to on the correct PHY */
+ {
+ MII_MGMT_ADDR_t mii_mgmt_addr;
+
+ mii_mgmt_addr.bits.phy_addr = xcvrAddr;
+ mii_mgmt_addr.bits.reg_addr = xcvrReg;
+ writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
+ }
+
+ /* Add the value to write to the registers to the mac */
+ writel(value, &mac->mii_mgmt_ctrl.value);
+ delay = 0;
+
+ do {
+ udelay(50);
+ delay++;
+ miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
+ } while (miiIndicator.bits.busy && delay < 100);
+
+ /* If we hit the max delay, we could not write the register */
+ if (delay == 100) {
+ uint16_t TempValue;
+
+ DBG_WARNING(et131x_dbginfo,
+ "xcvrReg 0x%08x could not be written", xcvrReg);
+ DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n",
+ miiIndicator.value);
+ DBG_WARNING(et131x_dbginfo, "command is 0x%08x\n",
+ readl(&mac->mii_mgmt_cmd.value));
+
+ MiRead(adapter, xcvrReg, &TempValue);
+
+ status = -EIO;
+ }
+
+ /* Stop the write operation */
+ writel(0, &mac->mii_mgmt_cmd.value);
+
+ /* set the registers we touched back to the state at which we entered
+ * this function
+ */
+ writel(miiAddr.value, &mac->mii_mgmt_addr.value);
+ writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+
+ DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, "
+ "xcvr_reg = 0x%02x, "
+ "value = 0x%04x.\n", xcvrAddr, xcvrReg, value);
+
+ return status;
+}
+
+/**
+ * et131x_xcvr_find - Find the PHY ID
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_xcvr_find(struct et131x_adapter *adapter)
+{
+ int status = -ENODEV;
+ uint8_t xcvr_addr;
+ MI_IDR1_t idr1;
+ MI_IDR2_t idr2;
+ uint32_t xcvr_id;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* We need to get xcvr id and address we just get the first one */
+ for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) {
+ /* Read the ID from the PHY */
+ PhyMiRead(adapter, xcvr_addr,
+ (uint8_t) offsetof(MI_REGS_t, idr1),
+ &idr1.value);
+ PhyMiRead(adapter, xcvr_addr,
+ (uint8_t) offsetof(MI_REGS_t, idr2),
+ &idr2.value);
+
+ xcvr_id = (uint32_t) ((idr1.value << 16) | idr2.value);
+
+ if ((idr1.value != 0) && (idr1.value != 0xffff)) {
+ DBG_TRACE(et131x_dbginfo,
+ "Xcvr addr: 0x%02x\tXcvr_id: 0x%08x\n",
+ xcvr_addr, xcvr_id);
+
+ adapter->Stats.xcvr_id = xcvr_id;
+ adapter->Stats.xcvr_addr = xcvr_addr;
+
+ status = 0;
+ break;
+ }
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_setphy_normal - Set PHY for normal operation.
+ * @adapter: pointer to our private adapter structure
+ *
+ * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
+ * when going to D3 in WOL mode. Also used during initialization to set the
+ * PHY for normal operation.
+ */
+int et131x_setphy_normal(struct et131x_adapter *adapter)
+{
+ int status;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Make sure the PHY is powered up */
+ ET1310_PhyPowerDown(adapter, 0);
+ status = et131x_xcvr_init(adapter);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_xcvr_init - Init the phy if we are setting it into force mode
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+static int et131x_xcvr_init(struct et131x_adapter *adapter)
+{
+ int status = 0;
+ MI_IMR_t imr;
+ MI_ISR_t isr;
+ MI_LCR2_t lcr2;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Zero out the adapter structure variable representing BMSR */
+ adapter->Bmsr.value = 0;
+
+ MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, isr), &isr.value);
+
+ MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, imr), &imr.value);
+
+ /* Set the link status interrupt only. Bad behavior when link status
+ * and auto neg are set, we run into a nested interrupt problem
+ */
+ imr.bits.int_en = 0x1;
+ imr.bits.link_status = 0x1;
+ imr.bits.autoneg_status = 0x1;
+
+ MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, imr), imr.value);
+
+ /* Set the LED behavior such that LED 1 indicates speed (off =
+ * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
+ * link and activity (on for link, blink off for activity).
+ *
+ * NOTE: Some customizations have been added here for specific
+ * vendors; The LED behavior is now determined by vendor data in the
+ * EEPROM. However, the above description is the default.
+ */
+ if ((adapter->eepromData[1] & 0x4) == 0) {
+ MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2),
+ &lcr2.value);
+ if ((adapter->eepromData[1] & 0x8) == 0)
+ lcr2.bits.led_tx_rx = 0x3;
+ else
+ lcr2.bits.led_tx_rx = 0x4;
+ lcr2.bits.led_link = 0xa;
+ MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2),
+ lcr2.value);
+ }
+
+ /* Determine if we need to go into a force mode and set it */
+ if (adapter->AiForceSpeed == 0 && adapter->AiForceDpx == 0) {
+ if ((adapter->RegistryFlowControl == TxOnly) ||
+ (adapter->RegistryFlowControl == Both)) {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_SET, 4, 11, NULL);
+ } else {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+ }
+
+ if (adapter->RegistryFlowControl == Both) {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_SET, 4, 10, NULL);
+ } else {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 10, NULL);
+ }
+
+ /* Set the phy to autonegotiation */
+ ET1310_PhyAutoNeg(adapter, true);
+
+ /* NOTE - Do we need this? */
+ ET1310_PhyAccessMiBit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+ } else {
+ ET1310_PhyAutoNeg(adapter, false);
+
+ /* Set to the correct force mode. */
+ if (adapter->AiForceDpx != 1) {
+ if ((adapter->RegistryFlowControl == TxOnly) ||
+ (adapter->RegistryFlowControl == Both)) {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_SET, 4, 11,
+ NULL);
+ } else {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 11,
+ NULL);
+ }
+
+ if (adapter->RegistryFlowControl == Both) {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_SET, 4, 10,
+ NULL);
+ } else {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 10,
+ NULL);
+ }
+ } else {
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 10, NULL);
+ ET1310_PhyAccessMiBit(adapter,
+ TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+ }
+
+ switch (adapter->AiForceSpeed) {
+ case 10:
+ if (adapter->AiForceDpx == 1) {
+ TPAL_SetPhy10HalfDuplex(adapter);
+ } else if (adapter->AiForceDpx == 2) {
+ TPAL_SetPhy10FullDuplex(adapter);
+ } else {
+ TPAL_SetPhy10Force(adapter);
+ }
+ break;
+ case 100:
+ if (adapter->AiForceDpx == 1) {
+ TPAL_SetPhy100HalfDuplex(adapter);
+ } else if (adapter->AiForceDpx == 2) {
+ TPAL_SetPhy100FullDuplex(adapter);
+ } else {
+ TPAL_SetPhy100Force(adapter);
+ }
+ break;
+ case 1000:
+ TPAL_SetPhy1000FullDuplex(adapter);
+ break;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+ }
+}
+
+void et131x_Mii_check(struct et131x_adapter *pAdapter,
+ MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints)
+{
+ uint8_t ucLinkStatus;
+ uint32_t uiAutoNegStatus;
+ uint32_t uiSpeed;
+ uint32_t uiDuplex;
+ uint32_t uiMdiMdix;
+ uint32_t uiMasterSlave;
+ uint32_t uiPolarity;
+ unsigned long lockflags;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ if (bmsr_ints.bits.link_status) {
+ if (bmsr.bits.link_status) {
+ pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20;
+
+ /* Update our state variables and indicate the
+ * connected state
+ */
+ spin_lock_irqsave(&pAdapter->Lock, lockflags);
+
+ pAdapter->MediaState = NETIF_STATUS_MEDIA_CONNECT;
+ MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION);
+
+ spin_unlock_irqrestore(&pAdapter->Lock, lockflags);
+
+ /* Don't indicate state if we're in loopback mode */
+ if (pAdapter->RegistryPhyLoopbk == false) {
+ netif_carrier_on(pAdapter->netdev);
+ }
+ } else {
+ DBG_WARNING(et131x_dbginfo,
+ "Link down cable problem\n");
+
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) {
+ // NOTE - Is there a way to query this without TruePHY?
+ // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) {
+ uint16_t Register18;
+
+ MiRead(pAdapter, 0x12, &Register18);
+ MiWrite(pAdapter, 0x12, Register18 | 0x4);
+ MiWrite(pAdapter, 0x10, Register18 | 0x8402);
+ MiWrite(pAdapter, 0x11, Register18 | 511);
+ MiWrite(pAdapter, 0x12, Register18);
+ }
+
+ /* For the first N seconds of life, we are in "link
+ * detection" When we are in this state, we should
+ * only report "connected". When the LinkDetection
+ * Timer expires, we can report disconnected (handled
+ * in the LinkDetectionDPC).
+ */
+ if ((MP_IS_FLAG_CLEAR
+ (pAdapter, fMP_ADAPTER_LINK_DETECTION))
+ || (pAdapter->MediaState ==
+ NETIF_STATUS_MEDIA_DISCONNECT)) {
+ spin_lock_irqsave(&pAdapter->Lock, lockflags);
+ pAdapter->MediaState =
+ NETIF_STATUS_MEDIA_DISCONNECT;
+ spin_unlock_irqrestore(&pAdapter->Lock,
+ lockflags);
+
+ /* Only indicate state if we're in loopback
+ * mode
+ */
+ if (pAdapter->RegistryPhyLoopbk == false) {
+ netif_carrier_off(pAdapter->netdev);
+ }
+ }
+
+ pAdapter->uiLinkSpeed = 0;
+ pAdapter->uiDuplexMode = 0;
+
+ /* Free the packets being actively sent & stopped */
+ et131x_free_busy_send_packets(pAdapter);
+
+ /* Re-initialize the send structures */
+ et131x_init_send(pAdapter);
+
+ /* Reset the RFD list and re-start RU */
+ et131x_reset_recv(pAdapter);
+
+ /*
+ * Bring the device back to the state it was during
+ * init prior to autonegotiation being complete. This
+ * way, when we get the auto-neg complete interrupt,
+ * we can complete init by calling ConfigMacREGS2.
+ */
+ et131x_soft_reset(pAdapter);
+
+ /* Setup ET1310 as per the documentation */
+ et131x_adapter_setup(pAdapter);
+
+ /* Setup the PHY into coma mode until the cable is
+ * plugged back in
+ */
+ if (pAdapter->RegistryPhyComa == 1) {
+ EnablePhyComa(pAdapter);
+ }
+ }
+ }
+
+ if (bmsr_ints.bits.auto_neg_complete ||
+ ((pAdapter->AiForceDpx == 3) && (bmsr_ints.bits.link_status))) {
+ if (bmsr.bits.auto_neg_complete || (pAdapter->AiForceDpx == 3)) {
+ ET1310_PhyLinkStatus(pAdapter,
+ &ucLinkStatus, &uiAutoNegStatus,
+ &uiSpeed, &uiDuplex, &uiMdiMdix,
+ &uiMasterSlave, &uiPolarity);
+
+ pAdapter->uiLinkSpeed = uiSpeed;
+ pAdapter->uiDuplexMode = uiDuplex;
+
+ DBG_TRACE(et131x_dbginfo,
+ "pAdapter->uiLinkSpeed 0x%04x, pAdapter->uiDuplex 0x%08x\n",
+ pAdapter->uiLinkSpeed,
+ pAdapter->uiDuplexMode);
+
+ pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20;
+
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) {
+ // NOTE - Is there a way to query this without TruePHY?
+ // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) {
+ uint16_t Register18;
+
+ MiRead(pAdapter, 0x12, &Register18);
+ MiWrite(pAdapter, 0x12, Register18 | 0x4);
+ MiWrite(pAdapter, 0x10, Register18 | 0x8402);
+ MiWrite(pAdapter, 0x11, Register18 | 511);
+ MiWrite(pAdapter, 0x12, Register18);
+ }
+
+ ConfigFlowControl(pAdapter);
+
+ if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) &&
+ (pAdapter->RegistryJumboPacket > 2048))
+ {
+ ET1310_PhyAndOrReg(pAdapter, 0x16, 0xcfff,
+ 0x2000);
+ }
+
+ SetRxDmaTimer(pAdapter);
+ ConfigMACRegs2(pAdapter);
+ }
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* First we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy10FullDuplex(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* First we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* Disable autoneg */
+ ET1310_PhyAutoNeg(pAdapter, false);
+
+ /* Disable all advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Force 10 Mbps */
+ ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_10MBPS);
+
+ /* Force Full duplex */
+ ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly.
+ */
+void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* first we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF);
+
+ /* Set speed */
+ ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode.
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly
+ */
+void TPAL_SetPhy100FullDuplex(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* First we need to turn off all other advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Set our advertise values accordingly */
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* Disable autoneg */
+ ET1310_PhyAutoNeg(pAdapter, false);
+
+ /* Disable all advertisement */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* Force 100 Mbps */
+ ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS);
+
+ /* Force Full duplex */
+ ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode
+ * @pAdapter: pointer to the adapter structure
+ *
+ * Also sets the MAC so it is syncd up properly.
+ */
+void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* first we need to turn off all other advertisement */
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+
+ /* set our advertise values accordingly */
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+
+ /* power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode.
+ * @pAdapter: pointer to the adapter structure
+ */
+void TPAL_SetPhyAutoNeg(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /* Turn on advertisement of all capabilities */
+ ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH);
+
+ ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH);
+
+ if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) {
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+ } else {
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ }
+
+ /* Make sure auto-neg is ON (it is disabled in FORCE modes) */
+ ET1310_PhyAutoNeg(pAdapter, true);
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+
+/*
+ * The routines which follow provide low-level access to the PHY, and are used
+ * primarily by the routines above (although there are a few places elsewhere
+ * in the driver where this level of access is required).
+ */
+
+static const uint16_t ConfigPhy[25][2] = {
+ /* Reg Value Register */
+ /* Addr */
+ {0x880B, 0x0926}, /* AfeIfCreg4B1000Msbs */
+ {0x880C, 0x0926}, /* AfeIfCreg4B100Msbs */
+ {0x880D, 0x0926}, /* AfeIfCreg4B10Msbs */
+
+ {0x880E, 0xB4D3}, /* AfeIfCreg4B1000Lsbs */
+ {0x880F, 0xB4D3}, /* AfeIfCreg4B100Lsbs */
+ {0x8810, 0xB4D3}, /* AfeIfCreg4B10Lsbs */
+
+ {0x8805, 0xB03E}, /* AfeIfCreg3B1000Msbs */
+ {0x8806, 0xB03E}, /* AfeIfCreg3B100Msbs */
+ {0x8807, 0xFF00}, /* AfeIfCreg3B10Msbs */
+
+ {0x8808, 0xE090}, /* AfeIfCreg3B1000Lsbs */
+ {0x8809, 0xE110}, /* AfeIfCreg3B100Lsbs */
+ {0x880A, 0x0000}, /* AfeIfCreg3B10Lsbs */
+
+ {0x300D, 1}, /* DisableNorm */
+
+ {0x280C, 0x0180}, /* LinkHoldEnd */
+
+ {0x1C21, 0x0002}, /* AlphaM */
+
+ {0x3821, 6}, /* FfeLkgTx0 */
+ {0x381D, 1}, /* FfeLkg1g4 */
+ {0x381E, 1}, /* FfeLkg1g5 */
+ {0x381F, 1}, /* FfeLkg1g6 */
+ {0x3820, 1}, /* FfeLkg1g7 */
+
+ {0x8402, 0x01F0}, /* Btinact */
+ {0x800E, 20}, /* LftrainTime */
+ {0x800F, 24}, /* DvguardTime */
+ {0x8010, 46}, /* IdlguardTime */
+
+ {0, 0}
+
+};
+
+/* condensed version of the phy initialization routine */
+void ET1310_PhyInit(struct et131x_adapter *pAdapter)
+{
+ uint16_t usData, usIndex;
+
+ if (pAdapter == NULL) {
+ return;
+ }
+
+ // get the identity (again ?)
+ MiRead(pAdapter, PHY_ID_1, &usData);
+ MiRead(pAdapter, PHY_ID_2, &usData);
+
+ // what does this do/achieve ?
+ MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006);
+
+ // read modem register 0402, should I do something with the return data ?
+ MiWrite(pAdapter, PHY_INDEX_REG, 0x0402);
+ MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+ // what does this do/achieve ?
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+
+ // get the identity (again ?)
+ MiRead(pAdapter, PHY_ID_1, &usData);
+ MiRead(pAdapter, PHY_ID_2, &usData);
+
+ // what does this achieve ?
+ MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006);
+
+ // read modem register 0402, should I do something with the return data?
+ MiWrite(pAdapter, PHY_INDEX_REG, 0x0402);
+ MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+
+ // what does this achieve (should return 0x1040)
+ MiRead(pAdapter, PHY_CONTROL, &usData);
+ MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002
+ MiWrite(pAdapter, PHY_CONTROL, 0x1840);
+
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0007);
+
+ // here the writing of the array starts....
+ usIndex = 0;
+ while (ConfigPhy[usIndex][0] != 0x0000) {
+ // write value
+ MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]);
+ MiWrite(pAdapter, PHY_DATA_REG, ConfigPhy[usIndex][1]);
+
+ // read it back
+ MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]);
+ MiRead(pAdapter, PHY_DATA_REG, &usData);
+
+ // do a check on the value read back ?
+ usIndex++;
+ }
+ // here the writing of the array ends...
+
+ MiRead(pAdapter, PHY_CONTROL, &usData); // 0x1840
+ MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0007
+ MiWrite(pAdapter, PHY_CONTROL, 0x1040);
+ MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002);
+}
+
+void ET1310_PhyReset(struct et131x_adapter *pAdapter)
+{
+ MiWrite(pAdapter, PHY_CONTROL, 0x8000);
+}
+
+void ET1310_PhyPowerDown(struct et131x_adapter *pAdapter, bool down)
+{
+ uint16_t usData;
+
+ MiRead(pAdapter, PHY_CONTROL, &usData);
+
+ if (down == false) {
+ // Power UP
+ usData &= ~0x0800;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ } else {
+ // Power DOWN
+ usData |= 0x0800;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ }
+}
+
+void ET1310_PhyAutoNeg(struct et131x_adapter *pAdapter, bool enable)
+{
+ uint16_t usData;
+
+ MiRead(pAdapter, PHY_CONTROL, &usData);
+
+ if (enable == true) {
+ // Autonegotiation ON
+ usData |= 0x1000;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ } else {
+ // Autonegotiation OFF
+ usData &= ~0x1000;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ }
+}
+
+void ET1310_PhyDuplexMode(struct et131x_adapter *pAdapter, uint16_t duplex)
+{
+ uint16_t usData;
+
+ MiRead(pAdapter, PHY_CONTROL, &usData);
+
+ if (duplex == TRUEPHY_DUPLEX_FULL) {
+ // Set Full Duplex
+ usData |= 0x100;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ } else {
+ // Set Half Duplex
+ usData &= ~0x100;
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+ }
+}
+
+void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed)
+{
+ uint16_t usData;
+
+ // Read the PHY control register
+ MiRead(pAdapter, PHY_CONTROL, &usData);
+
+ // Clear all Speed settings (Bits 6, 13)
+ usData &= ~0x2040;
+
+ // Reset the speed bits based on user selection
+ switch (speed) {
+ case TRUEPHY_SPEED_10MBPS:
+ // Bits already cleared above, do nothing
+ break;
+
+ case TRUEPHY_SPEED_100MBPS:
+ // 100M == Set bit 13
+ usData |= 0x2000;
+ break;
+
+ case TRUEPHY_SPEED_1000MBPS:
+ default:
+ usData |= 0x0040;
+ break;
+ }
+
+ // Write back the new speed
+ MiWrite(pAdapter, PHY_CONTROL, usData);
+}
+
+void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter,
+ uint16_t duplex)
+{
+ uint16_t usData;
+
+ // Read the PHY 1000 Base-T Control Register
+ MiRead(pAdapter, PHY_1000_CONTROL, &usData);
+
+ // Clear Bits 8,9
+ usData &= ~0x0300;
+
+ switch (duplex) {
+ case TRUEPHY_ADV_DUPLEX_NONE:
+ // Duplex already cleared, do nothing
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_FULL:
+ // Set Bit 9
+ usData |= 0x0200;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_HALF:
+ // Set Bit 8
+ usData |= 0x0100;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_BOTH:
+ default:
+ usData |= 0x0300;
+ break;
+ }
+
+ // Write back advertisement
+ MiWrite(pAdapter, PHY_1000_CONTROL, usData);
+}
+
+void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter,
+ uint16_t duplex)
+{
+ uint16_t usData;
+
+ // Read the Autonegotiation Register (10/100)
+ MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData);
+
+ // Clear bits 7,8
+ usData &= ~0x0180;
+
+ switch (duplex) {
+ case TRUEPHY_ADV_DUPLEX_NONE:
+ // Duplex already cleared, do nothing
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_FULL:
+ // Set Bit 8
+ usData |= 0x0100;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_HALF:
+ // Set Bit 7
+ usData |= 0x0080;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_BOTH:
+ default:
+ // Set Bits 7,8
+ usData |= 0x0180;
+ break;
+ }
+
+ // Write back advertisement
+ MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData);
+}
+
+void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter,
+ uint16_t duplex)
+{
+ uint16_t usData;
+
+ // Read the Autonegotiation Register (10/100)
+ MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData);
+
+ // Clear bits 5,6
+ usData &= ~0x0060;
+
+ switch (duplex) {
+ case TRUEPHY_ADV_DUPLEX_NONE:
+ // Duplex already cleared, do nothing
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_FULL:
+ // Set Bit 6
+ usData |= 0x0040;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_HALF:
+ // Set Bit 5
+ usData |= 0x0020;
+ break;
+
+ case TRUEPHY_ADV_DUPLEX_BOTH:
+ default:
+ // Set Bits 5,6
+ usData |= 0x0060;
+ break;
+ }
+
+ // Write back advertisement
+ MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData);
+}
+
+void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter,
+ uint8_t *ucLinkStatus,
+ uint32_t *uiAutoNeg,
+ uint32_t *uiLinkSpeed,
+ uint32_t *uiDuplexMode,
+ uint32_t *uiMdiMdix,
+ uint32_t *uiMasterSlave, uint32_t *uiPolarity)
+{
+ uint16_t usMiStatus = 0;
+ uint16_t us1000BaseT = 0;
+ uint16_t usVmiPhyStatus = 0;
+ uint16_t usControl = 0;
+
+ MiRead(pAdapter, PHY_STATUS, &usMiStatus);
+ MiRead(pAdapter, PHY_1000_STATUS, &us1000BaseT);
+ MiRead(pAdapter, PHY_PHY_STATUS, &usVmiPhyStatus);
+ MiRead(pAdapter, PHY_CONTROL, &usControl);
+
+ if (ucLinkStatus) {
+ *ucLinkStatus =
+ (unsigned char)((usVmiPhyStatus & 0x0040) ? 1 : 0);
+ }
+
+ if (uiAutoNeg) {
+ *uiAutoNeg =
+ (usControl & 0x1000) ? ((usVmiPhyStatus & 0x0020) ?
+ TRUEPHY_ANEG_COMPLETE :
+ TRUEPHY_ANEG_NOT_COMPLETE) :
+ TRUEPHY_ANEG_DISABLED;
+ }
+
+ if (uiLinkSpeed) {
+ *uiLinkSpeed = (usVmiPhyStatus & 0x0300) >> 8;
+ }
+
+ if (uiDuplexMode) {
+ *uiDuplexMode = (usVmiPhyStatus & 0x0080) >> 7;
+ }
+
+ if (uiMdiMdix) {
+ /* NOTE: Need to complete this */
+ *uiMdiMdix = 0;
+ }
+
+ if (uiMasterSlave) {
+ *uiMasterSlave =
+ (us1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER :
+ TRUEPHY_CFG_SLAVE;
+ }
+
+ if (uiPolarity) {
+ *uiPolarity =
+ (usVmiPhyStatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED :
+ TRUEPHY_POLARITY_NORMAL;
+ }
+}
+
+void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter,
+ uint16_t regnum, uint16_t andMask, uint16_t orMask)
+{
+ uint16_t reg;
+
+ // Read the requested register
+ MiRead(pAdapter, regnum, ®);
+
+ // Apply the AND mask
+ reg &= andMask;
+
+ // Apply the OR mask
+ reg |= orMask;
+
+ // Write the value back to the register
+ MiWrite(pAdapter, regnum, reg);
+}
+
+void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action,
+ uint16_t regnum, uint16_t bitnum, uint8_t *value)
+{
+ uint16_t reg;
+ uint16_t mask = 0;
+
+ // Create a mask to isolate the requested bit
+ mask = 0x0001 << bitnum;
+
+ // Read the requested register
+ MiRead(pAdapter, regnum, ®);
+
+ switch (action) {
+ case TRUEPHY_BIT_READ:
+ if (value != NULL) {
+ *value = (reg & mask) >> bitnum;
+ }
+ break;
+
+ case TRUEPHY_BIT_SET:
+ reg |= mask;
+ MiWrite(pAdapter, regnum, reg);
+ break;
+
+ case TRUEPHY_BIT_CLEAR:
+ reg &= ~mask;
+ MiWrite(pAdapter, regnum, reg);
+ break;
+
+ default:
+ break;
+ }
+}
diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
new file mode 100644
index 0000000..d624cbb
--- /dev/null
+++ b/drivers/staging/et131x/et1310_phy.h
@@ -0,0 +1,910 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_phy.h - Defines, structs, enums, prototypes, etc. pertaining to the
+ * PHY.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_PHY_H_
+#define _ET1310_PHY_H_
+
+#include "et1310_address_map.h"
+
+#define TRUEPHY_SUCCESS 0
+#define TRUEPHY_FAILURE 1
+typedef void *TRUEPHY_HANDLE;
+typedef void *TRUEPHY_PLATFORM_HANDLE;
+typedef void *TRUEPHY_OSAL_HANDLE;
+
+/* MI Register Addresses */
+#define MI_CONTROL_REG 0
+#define MI_STATUS_REG 1
+#define MI_PHY_IDENTIFIER_1_REG 2
+#define MI_PHY_IDENTIFIER_2_REG 3
+#define MI_AUTONEG_ADVERTISEMENT_REG 4
+#define MI_AUTONEG_LINK_PARTNER_ABILITY_REG 5
+#define MI_AUTONEG_EXPANSION_REG 6
+#define MI_AUTONEG_NEXT_PAGE_TRANSMIT_REG 7
+#define MI_LINK_PARTNER_NEXT_PAGE_REG 8
+#define MI_1000BASET_CONTROL_REG 9
+#define MI_1000BASET_STATUS_REG 10
+#define MI_RESERVED11_REG 11
+#define MI_RESERVED12_REG 12
+#define MI_RESERVED13_REG 13
+#define MI_RESERVED14_REG 14
+#define MI_EXTENDED_STATUS_REG 15
+
+/* VMI Register Addresses */
+#define VMI_RESERVED16_REG 16
+#define VMI_RESERVED17_REG 17
+#define VMI_RESERVED18_REG 18
+#define VMI_LOOPBACK_CONTROL_REG 19
+#define VMI_RESERVED20_REG 20
+#define VMI_MI_CONTROL_REG 21
+#define VMI_PHY_CONFIGURATION_REG 22
+#define VMI_PHY_CONTROL_REG 23
+#define VMI_INTERRUPT_MASK_REG 24
+#define VMI_INTERRUPT_STATUS_REG 25
+#define VMI_PHY_STATUS_REG 26
+#define VMI_LED_CONTROL_1_REG 27
+#define VMI_LED_CONTROL_2_REG 28
+#define VMI_RESERVED29_REG 29
+#define VMI_RESERVED30_REG 30
+#define VMI_RESERVED31_REG 31
+
+/* PHY Register Mapping(MI) Management Interface Regs */
+typedef struct _MI_REGS_t {
+ u8 bmcr; // Basic mode control reg(Reg 0x00)
+ u8 bmsr; // Basic mode status reg(Reg 0x01)
+ u8 idr1; // Phy identifier reg 1(Reg 0x02)
+ u8 idr2; // Phy identifier reg 2(Reg 0x03)
+ u8 anar; // Auto-Negotiation advertisement(Reg 0x04)
+ u8 anlpar; // Auto-Negotiation link Partner Ability(Reg 0x05)
+ u8 aner; // Auto-Negotiation expansion reg(Reg 0x06)
+ u8 annptr; // Auto-Negotiation next page transmit reg(Reg 0x07)
+ u8 lpnpr; // link partner next page reg(Reg 0x08)
+ u8 gcr; // Gigabit basic mode control reg(Reg 0x09)
+ u8 gsr; // Gigabit basic mode status reg(Reg 0x0A)
+ u8 mi_res1[4]; // Future use by MI working group(Reg 0x0B - 0x0E)
+ u8 esr; // Extended status reg(Reg 0x0F)
+ u8 mi_res2[3]; // Future use by MI working group(Reg 0x10 - 0x12)
+ u8 loop_ctl; // Loopback Control Reg(Reg 0x13)
+ u8 mi_res3; // Future use by MI working group(Reg 0x14)
+ u8 mcr; // MI Control Reg(Reg 0x15)
+ u8 pcr; // Configuration Reg(Reg 0x16)
+ u8 phy_ctl; // PHY Control Reg(Reg 0x17)
+ u8 imr; // Interrupt Mask Reg(Reg 0x18)
+ u8 isr; // Interrupt Status Reg(Reg 0x19)
+ u8 psr; // PHY Status Reg(Reg 0x1A)
+ u8 lcr1; // LED Control 1 Reg(Reg 0x1B)
+ u8 lcr2; // LED Control 2 Reg(Reg 0x1C)
+ u8 mi_res4[3]; // Future use by MI working group(Reg 0x1D - 0x1F)
+} MI_REGS_t, *PMI_REGS_t;
+
+/* MI Register 0: Basic mode control register */
+typedef union _MI_BMCR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 reset:1; // bit 15
+ u16 loopback:1; // bit 14
+ u16 speed_sel:1; // bit 13
+ u16 enable_autoneg:1; // bit 12
+ u16 power_down:1; // bit 11
+ u16 isolate:1; // bit 10
+ u16 restart_autoneg:1; // bit 9
+ u16 duplex_mode:1; // bit 8
+ u16 col_test:1; // bit 7
+ u16 speed_1000_sel:1; // bit 6
+ u16 res1:6; // bits 0-5
+#else
+ u16 res1:6; // bits 0-5
+ u16 speed_1000_sel:1; // bit 6
+ u16 col_test:1; // bit 7
+ u16 duplex_mode:1; // bit 8
+ u16 restart_autoneg:1; // bit 9
+ u16 isolate:1; // bit 10
+ u16 power_down:1; // bit 11
+ u16 enable_autoneg:1; // bit 12
+ u16 speed_sel:1; // bit 13
+ u16 loopback:1; // bit 14
+ u16 reset:1; // bit 15
+#endif
+ } bits;
+} MI_BMCR_t, *PMI_BMCR_t;
+
+/* MI Register 1: Basic mode status register */
+typedef union _MI_BMSR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 link_100T4:1; // bit 15
+ u16 link_100fdx:1; // bit 14
+ u16 link_100hdx:1; // bit 13
+ u16 link_10fdx:1; // bit 12
+ u16 link_10hdx:1; // bit 11
+ u16 link_100T2fdx:1; // bit 10
+ u16 link_100T2hdx:1; // bit 9
+ u16 extend_status:1; // bit 8
+ u16 res1:1; // bit 7
+ u16 preamble_supress:1; // bit 6
+ u16 auto_neg_complete:1; // bit 5
+ u16 remote_fault:1; // bit 4
+ u16 auto_neg_able:1; // bit 3
+ u16 link_status:1; // bit 2
+ u16 jabber_detect:1; // bit 1
+ u16 ext_cap:1; // bit 0
+#else
+ u16 ext_cap:1; // bit 0
+ u16 jabber_detect:1; // bit 1
+ u16 link_status:1; // bit 2
+ u16 auto_neg_able:1; // bit 3
+ u16 remote_fault:1; // bit 4
+ u16 auto_neg_complete:1; // bit 5
+ u16 preamble_supress:1; // bit 6
+ u16 res1:1; // bit 7
+ u16 extend_status:1; // bit 8
+ u16 link_100T2hdx:1; // bit 9
+ u16 link_100T2fdx:1; // bit 10
+ u16 link_10hdx:1; // bit 11
+ u16 link_10fdx:1; // bit 12
+ u16 link_100hdx:1; // bit 13
+ u16 link_100fdx:1; // bit 14
+ u16 link_100T4:1; // bit 15
+#endif
+ } bits;
+} MI_BMSR_t, *PMI_BMSR_t;
+
+/* MI Register 2: Physical Identifier 1 */
+typedef union _MI_IDR1_t {
+ u16 value;
+ struct {
+ u16 ieee_address:16; // 0x0282 default(bits 0-15)
+ } bits;
+} MI_IDR1_t, *PMI_IDR1_t;
+
+/* MI Register 3: Physical Identifier 2 */
+typedef union _MI_IDR2_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 ieee_address:6; // 111100 default(bits 10-15)
+ u16 model_no:6; // 000001 default(bits 4-9)
+ u16 rev_no:4; // 0010 default(bits 0-3)
+#else
+ u16 rev_no:4; // 0010 default(bits 0-3)
+ u16 model_no:6; // 000001 default(bits 4-9)
+ u16 ieee_address:6; // 111100 default(bits 10-15)
+#endif
+ } bits;
+} MI_IDR2_t, *PMI_IDR2_t;
+
+/* MI Register 4: Auto-negotiation advertisement register */
+typedef union _MI_ANAR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 np_indication:1; // bit 15
+ u16 res2:1; // bit 14
+ u16 remote_fault:1; // bit 13
+ u16 res1:1; // bit 12
+ u16 cap_asmpause:1; // bit 11
+ u16 cap_pause:1; // bit 10
+ u16 cap_100T4:1; // bit 9
+ u16 cap_100fdx:1; // bit 8
+ u16 cap_100hdx:1; // bit 7
+ u16 cap_10fdx:1; // bit 6
+ u16 cap_10hdx:1; // bit 5
+ u16 selector:5; // bits 0-4
+#else
+ u16 selector:5; // bits 0-4
+ u16 cap_10hdx:1; // bit 5
+ u16 cap_10fdx:1; // bit 6
+ u16 cap_100hdx:1; // bit 7
+ u16 cap_100fdx:1; // bit 8
+ u16 cap_100T4:1; // bit 9
+ u16 cap_pause:1; // bit 10
+ u16 cap_asmpause:1; // bit 11
+ u16 res1:1; // bit 12
+ u16 remote_fault:1; // bit 13
+ u16 res2:1; // bit 14
+ u16 np_indication:1; // bit 15
+#endif
+ } bits;
+} MI_ANAR_t, *PMI_ANAR_t;
+
+/* MI Register 5: Auto-negotiation link partner advertisement register */
+typedef struct _MI_ANLPAR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 np_indication:1; // bit 15
+ u16 acknowledge:1; // bit 14
+ u16 remote_fault:1; // bit 13
+ u16 res1:1; // bit 12
+ u16 cap_asmpause:1; // bit 11
+ u16 cap_pause:1; // bit 10
+ u16 cap_100T4:1; // bit 9
+ u16 cap_100fdx:1; // bit 8
+ u16 cap_100hdx:1; // bit 7
+ u16 cap_10fdx:1; // bit 6
+ u16 cap_10hdx:1; // bit 5
+ u16 selector:5; // bits 0-4
+#else
+ u16 selector:5; // bits 0-4
+ u16 cap_10hdx:1; // bit 5
+ u16 cap_10fdx:1; // bit 6
+ u16 cap_100hdx:1; // bit 7
+ u16 cap_100fdx:1; // bit 8
+ u16 cap_100T4:1; // bit 9
+ u16 cap_pause:1; // bit 10
+ u16 cap_asmpause:1; // bit 11
+ u16 res1:1; // bit 12
+ u16 remote_fault:1; // bit 13
+ u16 acknowledge:1; // bit 14
+ u16 np_indication:1; // bit 15
+#endif
+ } bits;
+} MI_ANLPAR_t, *PMI_ANLPAR_t;
+
+/* MI Register 6: Auto-negotiation expansion register */
+typedef union _MI_ANER_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res:11; // bits 5-15
+ u16 pdf:1; // bit 4
+ u16 lp_np_able:1; // bit 3
+ u16 np_able:1; // bit 2
+ u16 page_rx:1; // bit 1
+ u16 lp_an_able:1; // bit 0
+#else
+ u16 lp_an_able:1; // bit 0
+ u16 page_rx:1; // bit 1
+ u16 np_able:1; // bit 2
+ u16 lp_np_able:1; // bit 3
+ u16 pdf:1; // bit 4
+ u16 res:11; // bits 5-15
+#endif
+ } bits;
+} MI_ANER_t, *PMI_ANER_t;
+
+/* MI Register 7: Auto-negotiation next page transmit reg(0x07) */
+typedef union _MI_ANNPTR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 np:1; // bit 15
+ u16 res1:1; // bit 14
+ u16 msg_page:1; // bit 13
+ u16 ack2:1; // bit 12
+ u16 toggle:1; // bit 11
+ u16 msg:11; // bits 0-10
+#else
+ u16 msg:11; // bits 0-10
+ u16 toggle:1; // bit 11
+ u16 ack2:1; // bit 12
+ u16 msg_page:1; // bit 13
+ u16 res1:1; // bit 14
+ u16 np:1; // bit 15
+#endif
+ } bits;
+} MI_ANNPTR_t, *PMI_ANNPTR_t;
+
+/* MI Register 8: Link Partner Next Page Reg(0x08) */
+typedef union _MI_LPNPR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 np:1; // bit 15
+ u16 ack:1; // bit 14
+ u16 msg_page:1; // bit 13
+ u16 ack2:1; // bit 12
+ u16 toggle:1; // bit 11
+ u16 msg:11; // bits 0-10
+#else
+ u16 msg:11; // bits 0-10
+ u16 toggle:1; // bit 11
+ u16 ack2:1; // bit 12
+ u16 msg_page:1; // bit 13
+ u16 ack:1; // bit 14
+ u16 np:1; // bit 15
+#endif
+ } bits;
+} MI_LPNPR_t, *PMI_LPNPR_t;
+
+/* MI Register 9: 1000BaseT Control Reg(0x09) */
+typedef union _MI_GCR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 test_mode:3; // bits 13-15
+ u16 ms_config_en:1; // bit 12
+ u16 ms_value:1; // bit 11
+ u16 port_type:1; // bit 10
+ u16 link_1000fdx:1; // bit 9
+ u16 link_1000hdx:1; // bit 8
+ u16 res:8; // bit 0-7
+#else
+ u16 res:8; // bit 0-7
+ u16 link_1000hdx:1; // bit 8
+ u16 link_1000fdx:1; // bit 9
+ u16 port_type:1; // bit 10
+ u16 ms_value:1; // bit 11
+ u16 ms_config_en:1; // bit 12
+ u16 test_mode:3; // bits 13-15
+#endif
+ } bits;
+} MI_GCR_t, *PMI_GCR_t;
+
+/* MI Register 10: 1000BaseT Status Reg(0x0A) */
+typedef union _MI_GSR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 ms_config_fault:1; // bit 15
+ u16 ms_resolve:1; // bit 14
+ u16 local_rx_status:1; // bit 13
+ u16 remote_rx_status:1; // bit 12
+ u16 link_1000fdx:1; // bit 11
+ u16 link_1000hdx:1; // bit 10
+ u16 res:2; // bits 8-9
+ u16 idle_err_cnt:8; // bits 0-7
+#else
+ u16 idle_err_cnt:8; // bits 0-7
+ u16 res:2; // bits 8-9
+ u16 link_1000hdx:1; // bit 10
+ u16 link_1000fdx:1; // bit 11
+ u16 remote_rx_status:1; // bit 12
+ u16 local_rx_status:1; // bit 13
+ u16 ms_resolve:1; // bit 14
+ u16 ms_config_fault:1; // bit 15
+#endif
+ } bits;
+} MI_GSR_t, *PMI_GSR_t;
+
+/* MI Register 11 - 14: Reserved Regs(0x0B - 0x0E) */
+typedef union _MI_RES_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res15:1; // bit 15
+ u16 res14:1; // bit 14
+ u16 res13:1; // bit 13
+ u16 res12:1; // bit 12
+ u16 res11:1; // bit 11
+ u16 res10:1; // bit 10
+ u16 res9:1; // bit 9
+ u16 res8:1; // bit 8
+ u16 res7:1; // bit 7
+ u16 res6:1; // bit 6
+ u16 res5:1; // bit 5
+ u16 res4:1; // bit 4
+ u16 res3:1; // bit 3
+ u16 res2:1; // bit 2
+ u16 res1:1; // bit 1
+ u16 res0:1; // bit 0
+#else
+ u16 res0:1; // bit 0
+ u16 res1:1; // bit 1
+ u16 res2:1; // bit 2
+ u16 res3:1; // bit 3
+ u16 res4:1; // bit 4
+ u16 res5:1; // bit 5
+ u16 res6:1; // bit 6
+ u16 res7:1; // bit 7
+ u16 res8:1; // bit 8
+ u16 res9:1; // bit 9
+ u16 res10:1; // bit 10
+ u16 res11:1; // bit 11
+ u16 res12:1; // bit 12
+ u16 res13:1; // bit 13
+ u16 res14:1; // bit 14
+ u16 res15:1; // bit 15
+#endif
+ } bits;
+} MI_RES_t, *PMI_RES_t;
+
+/* MI Register 15: Extended status Reg(0x0F) */
+typedef union _MI_ESR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 link_1000Xfdx:1; // bit 15
+ u16 link_1000Xhdx:1; // bit 14
+ u16 link_1000fdx:1; // bit 13
+ u16 link_1000hdx:1; // bit 12
+ u16 res:12; // bit 0-11
+#else
+ u16 res:12; // bit 0-11
+ u16 link_1000hdx:1; // bit 12
+ u16 link_1000fdx:1; // bit 13
+ u16 link_1000Xhdx:1; // bit 14
+ u16 link_1000Xfdx:1; // bit 15
+#endif
+ } bits;
+} MI_ESR_t, *PMI_ESR_t;
+
+/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
+
+/* MI Register 19: Loopback Control Reg(0x13) */
+typedef union _MI_LCR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 mii_en:1; // bit 15
+ u16 pcs_en:1; // bit 14
+ u16 pmd_en:1; // bit 13
+ u16 all_digital_en:1; // bit 12
+ u16 replica_en:1; // bit 11
+ u16 line_driver_en:1; // bit 10
+ u16 res:10; // bit 0-9
+#else
+ u16 res:10; // bit 0-9
+ u16 line_driver_en:1; // bit 10
+ u16 replica_en:1; // bit 11
+ u16 all_digital_en:1; // bit 12
+ u16 pmd_en:1; // bit 13
+ u16 pcs_en:1; // bit 14
+ u16 mii_en:1; // bit 15
+#endif
+ } bits;
+} MI_LCR_t, *PMI_LCR_t;
+
+/* MI Register 20: Reserved Reg(0x14) */
+
+/* MI Register 21: Management Interface Control Reg(0x15) */
+typedef union _MI_MICR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:5; // bits 11-15
+ u16 mi_error_count:7; // bits 4-10
+ u16 res2:1; // bit 3
+ u16 ignore_10g_fr:1; // bit 2
+ u16 res3:1; // bit 1
+ u16 preamble_supress_en:1; // bit 0
+#else
+ u16 preamble_supress_en:1; // bit 0
+ u16 res3:1; // bit 1
+ u16 ignore_10g_fr:1; // bit 2
+ u16 res2:1; // bit 3
+ u16 mi_error_count:7; // bits 4-10
+ u16 res1:5; // bits 11-15
+#endif
+ } bits;
+} MI_MICR_t, *PMI_MICR_t;
+
+/* MI Register 22: PHY Configuration Reg(0x16) */
+typedef union _MI_PHY_CONFIG_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 crs_tx_en:1; // bit 15
+ u16 res1:1; // bit 14
+ u16 tx_fifo_depth:2; // bits 12-13
+ u16 speed_downshift:2; // bits 10-11
+ u16 pbi_detect:1; // bit 9
+ u16 tbi_rate:1; // bit 8
+ u16 alternate_np:1; // bit 7
+ u16 group_mdio_en:1; // bit 6
+ u16 tx_clock_en:1; // bit 5
+ u16 sys_clock_en:1; // bit 4
+ u16 res2:1; // bit 3
+ u16 mac_if_mode:3; // bits 0-2
+#else
+ u16 mac_if_mode:3; // bits 0-2
+ u16 res2:1; // bit 3
+ u16 sys_clock_en:1; // bit 4
+ u16 tx_clock_en:1; // bit 5
+ u16 group_mdio_en:1; // bit 6
+ u16 alternate_np:1; // bit 7
+ u16 tbi_rate:1; // bit 8
+ u16 pbi_detect:1; // bit 9
+ u16 speed_downshift:2; // bits 10-11
+ u16 tx_fifo_depth:2; // bits 12-13
+ u16 res1:1; // bit 14
+ u16 crs_tx_en:1; // bit 15
+#endif
+ } bits;
+} MI_PHY_CONFIG_t, *PMI_PHY_CONFIG_t;
+
+/* MI Register 23: PHY CONTROL Reg(0x17) */
+typedef union _MI_PHY_CONTROL_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:1; // bit 15
+ u16 tdr_en:1; // bit 14
+ u16 res2:1; // bit 13
+ u16 downshift_attempts:2; // bits 11-12
+ u16 res3:5; // bit 6-10
+ u16 jabber_10baseT:1; // bit 5
+ u16 sqe_10baseT:1; // bit 4
+ u16 tp_loopback_10baseT:1; // bit 3
+ u16 preamble_gen_en:1; // bit 2
+ u16 res4:1; // bit 1
+ u16 force_int:1; // bit 0
+#else
+ u16 force_int:1; // bit 0
+ u16 res4:1; // bit 1
+ u16 preamble_gen_en:1; // bit 2
+ u16 tp_loopback_10baseT:1; // bit 3
+ u16 sqe_10baseT:1; // bit 4
+ u16 jabber_10baseT:1; // bit 5
+ u16 res3:5; // bit 6-10
+ u16 downshift_attempts:2; // bits 11-12
+ u16 res2:1; // bit 13
+ u16 tdr_en:1; // bit 14
+ u16 res1:1; // bit 15
+#endif
+ } bits;
+} MI_PHY_CONTROL_t, *PMI_PHY_CONTROL_t;
+
+/* MI Register 24: Interrupt Mask Reg(0x18) */
+typedef union _MI_IMR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:6; // bits 10-15
+ u16 mdio_sync_lost:1; // bit 9
+ u16 autoneg_status:1; // bit 8
+ u16 hi_bit_err:1; // bit 7
+ u16 np_rx:1; // bit 6
+ u16 err_counter_full:1; // bit 5
+ u16 fifo_over_underflow:1; // bit 4
+ u16 rx_status:1; // bit 3
+ u16 link_status:1; // bit 2
+ u16 automatic_speed:1; // bit 1
+ u16 int_en:1; // bit 0
+#else
+ u16 int_en:1; // bit 0
+ u16 automatic_speed:1; // bit 1
+ u16 link_status:1; // bit 2
+ u16 rx_status:1; // bit 3
+ u16 fifo_over_underflow:1; // bit 4
+ u16 err_counter_full:1; // bit 5
+ u16 np_rx:1; // bit 6
+ u16 hi_bit_err:1; // bit 7
+ u16 autoneg_status:1; // bit 8
+ u16 mdio_sync_lost:1; // bit 9
+ u16 res1:6; // bits 10-15
+#endif
+ } bits;
+} MI_IMR_t, *PMI_IMR_t;
+
+/* MI Register 25: Interrupt Status Reg(0x19) */
+typedef union _MI_ISR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:6; // bits 10-15
+ u16 mdio_sync_lost:1; // bit 9
+ u16 autoneg_status:1; // bit 8
+ u16 hi_bit_err:1; // bit 7
+ u16 np_rx:1; // bit 6
+ u16 err_counter_full:1; // bit 5
+ u16 fifo_over_underflow:1; // bit 4
+ u16 rx_status:1; // bit 3
+ u16 link_status:1; // bit 2
+ u16 automatic_speed:1; // bit 1
+ u16 int_en:1; // bit 0
+#else
+ u16 int_en:1; // bit 0
+ u16 automatic_speed:1; // bit 1
+ u16 link_status:1; // bit 2
+ u16 rx_status:1; // bit 3
+ u16 fifo_over_underflow:1; // bit 4
+ u16 err_counter_full:1; // bit 5
+ u16 np_rx:1; // bit 6
+ u16 hi_bit_err:1; // bit 7
+ u16 autoneg_status:1; // bit 8
+ u16 mdio_sync_lost:1; // bit 9
+ u16 res1:6; // bits 10-15
+#endif
+ } bits;
+} MI_ISR_t, *PMI_ISR_t;
+
+/* MI Register 26: PHY Status Reg(0x1A) */
+typedef union _MI_PSR_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:1; // bit 15
+ u16 autoneg_fault:2; // bit 13-14
+ u16 autoneg_status:1; // bit 12
+ u16 mdi_x_status:1; // bit 11
+ u16 polarity_status:1; // bit 10
+ u16 speed_status:2; // bits 8-9
+ u16 duplex_status:1; // bit 7
+ u16 link_status:1; // bit 6
+ u16 tx_status:1; // bit 5
+ u16 rx_status:1; // bit 4
+ u16 collision_status:1; // bit 3
+ u16 autoneg_en:1; // bit 2
+ u16 pause_en:1; // bit 1
+ u16 asymmetric_dir:1; // bit 0
+#else
+ u16 asymmetric_dir:1; // bit 0
+ u16 pause_en:1; // bit 1
+ u16 autoneg_en:1; // bit 2
+ u16 collision_status:1; // bit 3
+ u16 rx_status:1; // bit 4
+ u16 tx_status:1; // bit 5
+ u16 link_status:1; // bit 6
+ u16 duplex_status:1; // bit 7
+ u16 speed_status:2; // bits 8-9
+ u16 polarity_status:1; // bit 10
+ u16 mdi_x_status:1; // bit 11
+ u16 autoneg_status:1; // bit 12
+ u16 autoneg_fault:2; // bit 13-14
+ u16 res1:1; // bit 15
+#endif
+ } bits;
+} MI_PSR_t, *PMI_PSR_t;
+
+/* MI Register 27: LED Control Reg 1(0x1B) */
+typedef union _MI_LCR1_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 res1:2; // bits 14-15
+ u16 led_dup_indicate:2; // bits 12-13
+ u16 led_10baseT:2; // bits 10-11
+ u16 led_collision:2; // bits 8-9
+ u16 res2:2; // bits 6-7
+ u16 res3:2; // bits 4-5
+ u16 pulse_dur:2; // bits 2-3
+ u16 pulse_stretch1:1; // bit 1
+ u16 pulse_stretch0:1; // bit 0
+#else
+ u16 pulse_stretch0:1; // bit 0
+ u16 pulse_stretch1:1; // bit 1
+ u16 pulse_dur:2; // bits 2-3
+ u16 res3:2; // bits 4-5
+ u16 res2:2; // bits 6-7
+ u16 led_collision:2; // bits 8-9
+ u16 led_10baseT:2; // bits 10-11
+ u16 led_dup_indicate:2; // bits 12-13
+ u16 res1:2; // bits 14-15
+#endif
+ } bits;
+} MI_LCR1_t, *PMI_LCR1_t;
+
+/* MI Register 28: LED Control Reg 2(0x1C) */
+typedef union _MI_LCR2_t {
+ u16 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u16 led_link:4; // bits 12-15
+ u16 led_tx_rx:4; // bits 8-11
+ u16 led_100BaseTX:4; // bits 4-7
+ u16 led_1000BaseT:4; // bits 0-3
+#else
+ u16 led_1000BaseT:4; // bits 0-3
+ u16 led_100BaseTX:4; // bits 4-7
+ u16 led_tx_rx:4; // bits 8-11
+ u16 led_link:4; // bits 12-15
+#endif
+ } bits;
+} MI_LCR2_t, *PMI_LCR2_t;
+
+/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */
+
+/* TruePHY headers */
+typedef struct _TRUEPHY_ACCESS_MI_REGS_ {
+ TRUEPHY_HANDLE hTruePhy;
+ int32_t nPhyId;
+ u8 bReadWrite;
+ u8 *pbyRegs;
+ u8 *pwData;
+ int32_t nRegCount;
+} TRUEPHY_ACCESS_MI_REGS, *PTRUEPHY_ACCESS_MI_REGS;
+
+/* TruePHY headers */
+typedef struct _TAG_TPAL_ACCESS_MI_REGS_ {
+ u32 nPhyId;
+ u8 bReadWrite;
+ u32 nRegCount;
+ u16 Data[4096];
+ u8 Regs[4096];
+} TPAL_ACCESS_MI_REGS, *PTPAL_ACCESS_MI_REGS;
+
+
+typedef TRUEPHY_HANDLE TPAL_HANDLE;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* OS Specific Functions*/
+void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy10FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter);
+void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy100FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter);
+void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *adapter);
+void TPAL_SetPhyAutoNeg(struct et131x_adapter *adapter);
+
+/* Prototypes for ET1310_phy.c */
+int et131x_xcvr_find(struct et131x_adapter *adapter);
+int et131x_setphy_normal(struct et131x_adapter *adapter);
+int32_t PhyMiRead(struct et131x_adapter *adapter,
+ u8 xcvrAddr, u8 xcvrReg, u16 *value);
+
+/* static inline function does not work because et131x_adapter is not always
+ * defined
+ */
+#define MiRead(adapter, xcvrReg, value) \
+ PhyMiRead((adapter), (adapter)->Stats.xcvr_addr, (xcvrReg), (value))
+
+int32_t MiWrite(struct et131x_adapter *adapter,
+ u8 xcvReg, u16 value);
+void et131x_Mii_check(struct et131x_adapter *pAdapter,
+ MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints);
+
+/* This last is not strictly required (the driver could call the TPAL
+ * version instead), but this sets the adapter up correctly, and calls the
+ * access routine indirectly. This protects the driver from changes in TPAL.
+ */
+void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter);
+
+/* Defines for PHY access routines */
+
+// Define bit operation flags
+#define TRUEPHY_BIT_CLEAR 0
+#define TRUEPHY_BIT_SET 1
+#define TRUEPHY_BIT_READ 2
+
+// Define read/write operation flags
+#ifndef TRUEPHY_READ
+#define TRUEPHY_READ 0
+#define TRUEPHY_WRITE 1
+#define TRUEPHY_MASK 2
+#endif
+
+// Define speeds
+#define TRUEPHY_SPEED_10MBPS 0
+#define TRUEPHY_SPEED_100MBPS 1
+#define TRUEPHY_SPEED_1000MBPS 2
+
+// Define duplex modes
+#define TRUEPHY_DUPLEX_HALF 0
+#define TRUEPHY_DUPLEX_FULL 1
+
+// Define master/slave configuration values
+#define TRUEPHY_CFG_SLAVE 0
+#define TRUEPHY_CFG_MASTER 1
+
+// Define MDI/MDI-X settings
+#define TRUEPHY_MDI 0
+#define TRUEPHY_MDIX 1
+#define TRUEPHY_AUTO_MDI_MDIX 2
+
+// Define 10Base-T link polarities
+#define TRUEPHY_POLARITY_NORMAL 0
+#define TRUEPHY_POLARITY_INVERTED 1
+
+// Define auto-negotiation results
+#define TRUEPHY_ANEG_NOT_COMPLETE 0
+#define TRUEPHY_ANEG_COMPLETE 1
+#define TRUEPHY_ANEG_DISABLED 2
+
+/* Define duplex advertisment flags */
+#define TRUEPHY_ADV_DUPLEX_NONE 0x00
+#define TRUEPHY_ADV_DUPLEX_FULL 0x01
+#define TRUEPHY_ADV_DUPLEX_HALF 0x02
+#define TRUEPHY_ADV_DUPLEX_BOTH \
+ (TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
+
+#define PHY_CONTROL 0x00 //#define TRU_MI_CONTROL_REGISTER 0
+#define PHY_STATUS 0x01 //#define TRU_MI_STATUS_REGISTER 1
+#define PHY_ID_1 0x02 //#define TRU_MI_PHY_IDENTIFIER_1_REGISTER 2
+#define PHY_ID_2 0x03 //#define TRU_MI_PHY_IDENTIFIER_2_REGISTER 3
+#define PHY_AUTO_ADVERTISEMENT 0x04 //#define TRU_MI_ADVERTISEMENT_REGISTER 4
+#define PHY_AUTO_LINK_PARTNER 0x05 //#define TRU_MI_LINK_PARTNER_ABILITY_REGISTER 5
+#define PHY_AUTO_EXPANSION 0x06 //#define TRU_MI_EXPANSION_REGISTER 6
+#define PHY_AUTO_NEXT_PAGE_TX 0x07 //#define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER 7
+#define PHY_LINK_PARTNER_NEXT_PAGE 0x08 //#define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER 8
+#define PHY_1000_CONTROL 0x09 //#define TRU_MI_1000BASET_CONTROL_REGISTER 9
+#define PHY_1000_STATUS 0x0A //#define TRU_MI_1000BASET_STATUS_REGISTER 10
+
+#define PHY_EXTENDED_STATUS 0x0F //#define TRU_MI_EXTENDED_STATUS_REGISTER 15
+
+// some defines for modem registers that seem to be 'reserved'
+#define PHY_INDEX_REG 0x10
+#define PHY_DATA_REG 0x11
+
+#define PHY_MPHY_CONTROL_REG 0x12 //#define TRU_VMI_MPHY_CONTROL_REGISTER 18
+
+#define PHY_LOOPBACK_CONTROL 0x13 //#define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER 19
+ //#define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER 20
+#define PHY_REGISTER_MGMT_CONTROL 0x15 //#define TRU_VMI_MI_SEQ_CONTROL_REGISTER 21
+#define PHY_CONFIG 0x16 //#define TRU_VMI_CONFIGURATION_REGISTER 22
+#define PHY_PHY_CONTROL 0x17 //#define TRU_VMI_PHY_CONTROL_REGISTER 23
+#define PHY_INTERRUPT_MASK 0x18 //#define TRU_VMI_INTERRUPT_MASK_REGISTER 24
+#define PHY_INTERRUPT_STATUS 0x19 //#define TRU_VMI_INTERRUPT_STATUS_REGISTER 25
+#define PHY_PHY_STATUS 0x1A //#define TRU_VMI_PHY_STATUS_REGISTER 26
+#define PHY_LED_1 0x1B //#define TRU_VMI_LED_CONTROL_1_REGISTER 27
+#define PHY_LED_2 0x1C //#define TRU_VMI_LED_CONTROL_2_REGISTER 28
+ //#define TRU_VMI_LINK_CONTROL_REGISTER 29
+ //#define TRU_VMI_TIMING_CONTROL_REGISTER
+
+/* Prototypes for PHY access routines */
+void ET1310_PhyInit(struct et131x_adapter *adapter);
+void ET1310_PhyReset(struct et131x_adapter *adapter);
+void ET1310_PhyPowerDown(struct et131x_adapter *adapter, bool down);
+void ET1310_PhyAutoNeg(struct et131x_adapter *adapter, bool enable);
+void ET1310_PhyDuplexMode(struct et131x_adapter *adapter, u16 duplex);
+void ET1310_PhySpeedSelect(struct et131x_adapter *adapter, u16 speed);
+void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *adapter,
+ u16 duplex);
+void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *adapter,
+ u16 duplex);
+void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *adapter,
+ u16 duplex);
+void ET1310_PhyLinkStatus(struct et131x_adapter *adapter,
+ u8 *ucLinkStatus,
+ u32 *uiAutoNeg,
+ u32 *uiLinkSpeed,
+ u32 *uiDuplexMode,
+ u32 *uiMdiMdix,
+ u32 *uiMasterSlave, u32 *uiPolarity);
+void ET1310_PhyAndOrReg(struct et131x_adapter *adapter,
+ u16 regnum, u16 andMask, u16 orMask);
+void ET1310_PhyAccessMiBit(struct et131x_adapter *adapter,
+ u16 action,
+ u16 regnum, u16 bitnum, u8 *value);
+
+#endif /* _ET1310_PHY_H_ */
diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c
new file mode 100644
index 0000000..9539bc6
--- /dev/null
+++ b/drivers/staging/et131x/et1310_pm.c
@@ -0,0 +1,207 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_pm.c - All power management related code (not completely implemented)
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+#include "et1310_rx.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * EnablePhyComa - called when network cable is unplugged
+ * @pAdapter: pointer to our adapter structure
+ *
+ * driver receive an phy status change interrupt while in D0 and check that
+ * phy_status is down.
+ *
+ * -- gate off JAGCore;
+ * -- set gigE PHY in Coma mode
+ * -- wake on phy_interrupt; Perform software reset JAGCore,
+ * re-initialize jagcore and gigE PHY
+ *
+ * Add D0-ASPM-PhyLinkDown Support:
+ * -- while in D0, when there is a phy_interrupt indicating phy link
+ * down status, call the MPSetPhyComa routine to enter this active
+ * state power saving mode
+ * -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt
+ * indicating linkup status, call the MPDisablePhyComa routine to
+ * restore JAGCore and gigE PHY
+ */
+void EnablePhyComa(struct et131x_adapter *pAdapter)
+{
+ unsigned long lockflags;
+ PM_CSR_t GlobalPmCSR;
+ int32_t LoopCounter = 10;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+ /* Save the GbE PHY speed and duplex modes. Need to restore this
+ * when cable is plugged back in
+ */
+ pAdapter->PoMgmt.PowerDownSpeed = pAdapter->AiForceSpeed;
+ pAdapter->PoMgmt.PowerDownDuplex = pAdapter->AiForceDpx;
+
+ /* Stop sending packets. */
+ spin_lock_irqsave(&pAdapter->SendHWLock, lockflags);
+ MP_SET_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER);
+ spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags);
+
+ /* Wait for outstanding Receive packets */
+ while ((MP_GET_RCV_REF(pAdapter) != 0) && (LoopCounter-- > 0)) {
+ mdelay(2);
+ }
+
+ /* Gate off JAGCore 3 clock domains */
+ GlobalPmCSR.bits.pm_sysclk_gate = 0;
+ GlobalPmCSR.bits.pm_txclk_gate = 0;
+ GlobalPmCSR.bits.pm_rxclk_gate = 0;
+ writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+ /* Program gigE PHY in to Coma mode */
+ GlobalPmCSR.bits.pm_phy_sw_coma = 1;
+ writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * DisablePhyComa - Disable the Phy Coma Mode
+ * @pAdapter: pointer to our adapter structure
+ */
+void DisablePhyComa(struct et131x_adapter *pAdapter)
+{
+ PM_CSR_t GlobalPmCSR;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+ /* Disable phy_sw_coma register and re-enable JAGCore clocks */
+ GlobalPmCSR.bits.pm_sysclk_gate = 1;
+ GlobalPmCSR.bits.pm_txclk_gate = 1;
+ GlobalPmCSR.bits.pm_rxclk_gate = 1;
+ GlobalPmCSR.bits.pm_phy_sw_coma = 0;
+ writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value);
+
+ /* Restore the GbE PHY speed and duplex modes;
+ * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
+ */
+ pAdapter->AiForceSpeed = pAdapter->PoMgmt.PowerDownSpeed;
+ pAdapter->AiForceDpx = pAdapter->PoMgmt.PowerDownDuplex;
+
+ /* Re-initialize the send structures */
+ et131x_init_send(pAdapter);
+
+ /* Reset the RFD list and re-start RU */
+ et131x_reset_recv(pAdapter);
+
+ /* Bring the device back to the state it was during init prior to
+ * autonegotiation being complete. This way, when we get the auto-neg
+ * complete interrupt, we can complete init by calling ConfigMacREGS2.
+ */
+ et131x_soft_reset(pAdapter);
+
+ /* setup et1310 as per the documentation ?? */
+ et131x_adapter_setup(pAdapter);
+
+ /* Allow Tx to restart */
+ MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER);
+
+ /* Need to re-enable Rx. */
+ et131x_rx_dma_enable(pAdapter);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
diff --git a/drivers/staging/et131x/et1310_pm.h b/drivers/staging/et131x/et1310_pm.h
new file mode 100644
index 0000000..6802338
--- /dev/null
+++ b/drivers/staging/et131x/et1310_pm.h
@@ -0,0 +1,125 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_pm.h - Defines, structs, enums, prototypes, etc. pertaining to power
+ * management.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef _ET1310_PM_H_
+#define _ET1310_PM_H_
+
+#include "et1310_address_map.h"
+
+#define MAX_WOL_PACKET_SIZE 0x80
+#define MAX_WOL_MASK_SIZE ( MAX_WOL_PACKET_SIZE / 8 )
+#define NUM_WOL_PATTERNS 0x5
+#define CRC16_POLY 0x1021
+
+/* Definition of NDIS_DEVICE_POWER_STATE */
+typedef enum {
+ NdisDeviceStateUnspecified = 0,
+ NdisDeviceStateD0,
+ NdisDeviceStateD1,
+ NdisDeviceStateD2,
+ NdisDeviceStateD3
+} NDIS_DEVICE_POWER_STATE;
+
+typedef struct _MP_POWER_MGMT {
+ /* variable putting the phy into coma mode when boot up with no cable
+ * plugged in after 5 seconds
+ */
+ u8 TransPhyComaModeOnBoot;
+
+ /* Array holding the five CRC values that the device is currently
+ * using for WOL. This will be queried when a pattern is to be
+ * removed.
+ */
+ u32 localWolAndCrc0;
+ u16 WOLPatternList[NUM_WOL_PATTERNS];
+ u8 WOLMaskList[NUM_WOL_PATTERNS][MAX_WOL_MASK_SIZE];
+ u32 WOLMaskSize[NUM_WOL_PATTERNS];
+
+ /* IP address */
+ union {
+ u32 u32;
+ u8 u8[4];
+ } IPAddress;
+
+ /* Current Power state of the adapter. */
+ NDIS_DEVICE_POWER_STATE PowerState;
+ bool WOLState;
+ bool WOLEnabled;
+ bool Failed10Half;
+ bool bFailedStateTransition;
+
+ /* Next two used to save power information at power down. This
+ * information will be used during power up to set up parts of Power
+ * Management in JAGCore
+ */
+ u32 tx_en;
+ u32 rx_en;
+ u16 PowerDownSpeed;
+ u8 PowerDownDuplex;
+} MP_POWER_MGMT, *PMP_POWER_MGMT;
+
+/* Forward declaration of the private adapter structure
+ * ( IS THERE A WAY TO DO THIS WITH A TYPEDEF??? )
+ */
+struct et131x_adapter;
+
+u16 CalculateCCITCRC16(u8 *Pattern, u8 *Mask, u32 MaskSize);
+void EnablePhyComa(struct et131x_adapter *adapter);
+void DisablePhyComa(struct et131x_adapter *adapter);
+
+#endif /* _ET1310_PM_H_ */
diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
new file mode 100644
index 0000000..ec98da5
--- /dev/null
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -0,0 +1,1391 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_rx.c - Routines used to perform data reception
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+
+#include "et1310_rx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+
+void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd);
+
+/**
+ * et131x_rx_dma_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ *
+ * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required,
+ * and the Packet Status Ring.
+ */
+int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
+{
+ uint32_t OuterLoop, InnerLoop;
+ uint32_t bufsize;
+ uint32_t pktStatRingSize, FBRChunkSize;
+ RX_RING_t *rx_ring;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup some convenience pointers */
+ rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+ /* Alloc memory for the lookup table */
+#ifdef USE_FBR0
+ rx_ring->Fbr[0] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
+#endif
+
+ rx_ring->Fbr[1] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
+
+ /* The first thing we will do is configure the sizes of the buffer
+ * rings. These will change based on jumbo packet support. Larger
+ * jumbo packets increases the size of each entry in FBR0, and the
+ * number of entries in FBR0, while at the same time decreasing the
+ * number of entries in FBR1.
+ *
+ * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1
+ * entries are huge in order to accomodate a "jumbo" frame, then it
+ * will have less entries. Conversely, FBR1 will now be relied upon
+ * to carry more "normal" frames, thus it's entry size also increases
+ * and the number of entries goes up too (since it now carries
+ * "small" + "regular" packets.
+ *
+ * In this scheme, we try to maintain 512 entries between the two
+ * rings. Also, FBR1 remains a constant size - when it's size doubles
+ * the number of entries halves. FBR0 increases in size, however.
+ */
+
+ if (adapter->RegistryJumboPacket < 2048) {
+#ifdef USE_FBR0
+ rx_ring->Fbr0BufferSize = 256;
+ rx_ring->Fbr0NumEntries = 512;
+#endif
+ rx_ring->Fbr1BufferSize = 2048;
+ rx_ring->Fbr1NumEntries = 512;
+ } else if (adapter->RegistryJumboPacket < 4096) {
+#ifdef USE_FBR0
+ rx_ring->Fbr0BufferSize = 512;
+ rx_ring->Fbr0NumEntries = 1024;
+#endif
+ rx_ring->Fbr1BufferSize = 4096;
+ rx_ring->Fbr1NumEntries = 512;
+ } else {
+#ifdef USE_FBR0
+ rx_ring->Fbr0BufferSize = 1024;
+ rx_ring->Fbr0NumEntries = 768;
+#endif
+ rx_ring->Fbr1BufferSize = 16384;
+ rx_ring->Fbr1NumEntries = 128;
+ }
+
+#ifdef USE_FBR0
+ adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr0NumEntries +
+ adapter->RxRing.Fbr1NumEntries;
+#else
+ adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr1NumEntries;
+#endif
+
+ /* Allocate an area of memory for Free Buffer Ring 1 */
+ bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
+ rx_ring->pFbr1RingVa = pci_alloc_consistent(adapter->pdev,
+ bufsize,
+ &rx_ring->pFbr1RingPa);
+ if (!rx_ring->pFbr1RingVa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Free Buffer Ring 1\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Save physical address
+ *
+ * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here
+ * before storing the adjusted address.
+ */
+ rx_ring->Fbr1Realpa = rx_ring->pFbr1RingPa;
+
+ /* Align Free Buffer Ring 1 on a 4K boundary */
+ et131x_align_allocated_memory(adapter,
+ &rx_ring->Fbr1Realpa,
+ &rx_ring->Fbr1offset, 0x0FFF);
+
+ rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa +
+ rx_ring->Fbr1offset);
+
+#ifdef USE_FBR0
+ /* Allocate an area of memory for Free Buffer Ring 0 */
+ bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
+ rx_ring->pFbr0RingVa = pci_alloc_consistent(adapter->pdev,
+ bufsize,
+ &rx_ring->pFbr0RingPa);
+ if (!rx_ring->pFbr0RingVa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Free Buffer Ring 0\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Save physical address
+ *
+ * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here before
+ * storing the adjusted address.
+ */
+ rx_ring->Fbr0Realpa = rx_ring->pFbr0RingPa;
+
+ /* Align Free Buffer Ring 0 on a 4K boundary */
+ et131x_align_allocated_memory(adapter,
+ &rx_ring->Fbr0Realpa,
+ &rx_ring->Fbr0offset, 0x0FFF);
+
+ rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa +
+ rx_ring->Fbr0offset);
+#endif
+
+ for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr1NumEntries / FBR_CHUNKS);
+ OuterLoop++) {
+ uint64_t Fbr1Offset;
+ uint64_t Fbr1TempPa;
+ uint32_t Fbr1Align;
+
+ /* This code allocates an area of memory big enough for N
+ * free buffers + (buffer_size - 1) so that the buffers can
+ * be aligned on 4k boundaries. If each buffer were aligned
+ * to a buffer_size boundary, the effect would be to double
+ * the size of FBR0. By allocating N buffers at once, we
+ * reduce this overhead.
+ */
+ if (rx_ring->Fbr1BufferSize > 4096) {
+ Fbr1Align = 4096;
+ } else {
+ Fbr1Align = rx_ring->Fbr1BufferSize;
+ }
+
+ FBRChunkSize =
+ (FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1;
+ rx_ring->Fbr1MemVa[OuterLoop] =
+ pci_alloc_consistent(adapter->pdev, FBRChunkSize,
+ &rx_ring->Fbr1MemPa[OuterLoop]);
+
+ if (!rx_ring->Fbr1MemVa[OuterLoop]) {
+ DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* See NOTE in "Save Physical Address" comment above */
+ Fbr1TempPa = rx_ring->Fbr1MemPa[OuterLoop];
+
+ et131x_align_allocated_memory(adapter,
+ &Fbr1TempPa,
+ &Fbr1Offset, (Fbr1Align - 1));
+
+ for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
+ uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+
+ /* Save the Virtual address of this index for quick
+ * access later
+ */
+ rx_ring->Fbr[1]->Va[index] =
+ (uint8_t *) rx_ring->Fbr1MemVa[OuterLoop] +
+ (InnerLoop * rx_ring->Fbr1BufferSize) + Fbr1Offset;
+
+ /* now store the physical address in the descriptor
+ * so the device can access it
+ */
+ rx_ring->Fbr[1]->PAHigh[index] =
+ (uint32_t) (Fbr1TempPa >> 32);
+ rx_ring->Fbr[1]->PALow[index] = (uint32_t) Fbr1TempPa;
+
+ Fbr1TempPa += rx_ring->Fbr1BufferSize;
+
+ rx_ring->Fbr[1]->Buffer1[index] =
+ rx_ring->Fbr[1]->Va[index];
+ rx_ring->Fbr[1]->Buffer2[index] =
+ rx_ring->Fbr[1]->Va[index] - 4;
+ }
+ }
+
+#ifdef USE_FBR0
+ /* Same for FBR0 (if in use) */
+ for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr0NumEntries / FBR_CHUNKS);
+ OuterLoop++) {
+ uint64_t Fbr0Offset;
+ uint64_t Fbr0TempPa;
+
+ FBRChunkSize = ((FBR_CHUNKS + 1) * rx_ring->Fbr0BufferSize) - 1;
+ rx_ring->Fbr0MemVa[OuterLoop] =
+ pci_alloc_consistent(adapter->pdev, FBRChunkSize,
+ &rx_ring->Fbr0MemPa[OuterLoop]);
+
+ if (!rx_ring->Fbr0MemVa[OuterLoop]) {
+ DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* See NOTE in "Save Physical Address" comment above */
+ Fbr0TempPa = rx_ring->Fbr0MemPa[OuterLoop];
+
+ et131x_align_allocated_memory(adapter,
+ &Fbr0TempPa,
+ &Fbr0Offset,
+ rx_ring->Fbr0BufferSize - 1);
+
+ for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
+ uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
+
+ rx_ring->Fbr[0]->Va[index] =
+ (uint8_t *) rx_ring->Fbr0MemVa[OuterLoop] +
+ (InnerLoop * rx_ring->Fbr0BufferSize) + Fbr0Offset;
+
+ rx_ring->Fbr[0]->PAHigh[index] =
+ (uint32_t) (Fbr0TempPa >> 32);
+ rx_ring->Fbr[0]->PALow[index] = (uint32_t) Fbr0TempPa;
+
+ Fbr0TempPa += rx_ring->Fbr0BufferSize;
+
+ rx_ring->Fbr[0]->Buffer1[index] =
+ rx_ring->Fbr[0]->Va[index];
+ rx_ring->Fbr[0]->Buffer2[index] =
+ rx_ring->Fbr[0]->Va[index] - 4;
+ }
+ }
+#endif
+
+ /* Allocate an area of memory for FIFO of Packet Status ring entries */
+ pktStatRingSize =
+ sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
+
+ rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev,
+ pktStatRingSize + 0x0fff,
+ &rx_ring->pPSRingPa);
+
+ if (!rx_ring->pPSRingVa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Packet Status Ring\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Save physical address
+ *
+ * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here before
+ * storing the adjusted address.
+ */
+ rx_ring->pPSRingRealPa = rx_ring->pPSRingPa;
+
+ /* Align Packet Status Ring on a 4K boundary */
+ et131x_align_allocated_memory(adapter,
+ &rx_ring->pPSRingRealPa,
+ &rx_ring->pPSRingOffset, 0x0FFF);
+
+ rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa +
+ rx_ring->pPSRingOffset);
+
+ /* Allocate an area of memory for writeback of status information */
+ rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev,
+ sizeof(RX_STATUS_BLOCK_t) +
+ 0x7, &rx_ring->pRxStatusPa);
+ if (!rx_ring->pRxStatusVa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Status Block\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Save physical address */
+ rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa;
+
+ /* Align write back on an 8 byte boundary */
+ et131x_align_allocated_memory(adapter,
+ &rx_ring->RxStatusRealPA,
+ &rx_ring->RxStatusOffset, 0x07);
+
+ rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa +
+ rx_ring->RxStatusOffset);
+ rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
+
+ /* Recv
+ * pci_pool_create initializes a lookaside list. After successful
+ * creation, nonpaged fixed-size blocks can be allocated from and
+ * freed to the lookaside list.
+ * RFDs will be allocated from this pool.
+ */
+ rx_ring->RecvLookaside = kmem_cache_create(adapter->netdev->name,
+ sizeof(MP_RFD),
+ 0,
+ SLAB_CACHE_DMA |
+ SLAB_HWCACHE_ALIGN,
+ NULL);
+
+ MP_SET_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
+
+ /* The RFDs are going to be put on lists later on, so initialize the
+ * lists now.
+ */
+ INIT_LIST_HEAD(&rx_ring->RecvList);
+ INIT_LIST_HEAD(&rx_ring->RecvPendingList);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/**
+ * et131x_rx_dma_memory_free - Free all memory allocated within this module.
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
+{
+ uint32_t index;
+ uint32_t bufsize;
+ uint32_t pktStatRingSize;
+ PMP_RFD pMpRfd;
+ RX_RING_t *rx_ring;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup some convenience pointers */
+ rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+ /* Free RFDs and associated packet descriptors */
+ DBG_ASSERT(rx_ring->nReadyRecv == rx_ring->NumRfd);
+
+ while (!list_empty(&rx_ring->RecvList)) {
+ pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next,
+ MP_RFD, list_node);
+
+ list_del(&pMpRfd->list_node);
+ et131x_rfd_resources_free(adapter, pMpRfd);
+ }
+
+ while (!list_empty(&rx_ring->RecvPendingList)) {
+ pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next,
+ MP_RFD, list_node);
+ list_del(&pMpRfd->list_node);
+ et131x_rfd_resources_free(adapter, pMpRfd);
+ }
+
+ /* Free Free Buffer Ring 1 */
+ if (rx_ring->pFbr1RingVa) {
+ /* First the packet memory */
+ for (index = 0; index <
+ (rx_ring->Fbr1NumEntries / FBR_CHUNKS); index++) {
+ if (rx_ring->Fbr1MemVa[index]) {
+ uint32_t Fbr1Align;
+
+ if (rx_ring->Fbr1BufferSize > 4096) {
+ Fbr1Align = 4096;
+ } else {
+ Fbr1Align = rx_ring->Fbr1BufferSize;
+ }
+
+ bufsize =
+ (rx_ring->Fbr1BufferSize * FBR_CHUNKS) +
+ Fbr1Align - 1;
+
+ pci_free_consistent(adapter->pdev,
+ bufsize,
+ rx_ring->Fbr1MemVa[index],
+ rx_ring->Fbr1MemPa[index]);
+
+ rx_ring->Fbr1MemVa[index] = NULL;
+ }
+ }
+
+ /* Now the FIFO itself */
+ rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa -
+ rx_ring->Fbr1offset);
+
+ bufsize =
+ (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
+
+ pci_free_consistent(adapter->pdev,
+ bufsize,
+ rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa);
+
+ rx_ring->pFbr1RingVa = NULL;
+ }
+
+#ifdef USE_FBR0
+ /* Now the same for Free Buffer Ring 0 */
+ if (rx_ring->pFbr0RingVa) {
+ /* First the packet memory */
+ for (index = 0; index <
+ (rx_ring->Fbr0NumEntries / FBR_CHUNKS); index++) {
+ if (rx_ring->Fbr0MemVa[index]) {
+ bufsize =
+ (rx_ring->Fbr0BufferSize *
+ (FBR_CHUNKS + 1)) - 1;
+
+ pci_free_consistent(adapter->pdev,
+ bufsize,
+ rx_ring->Fbr0MemVa[index],
+ rx_ring->Fbr0MemPa[index]);
+
+ rx_ring->Fbr0MemVa[index] = NULL;
+ }
+ }
+
+ /* Now the FIFO itself */
+ rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa -
+ rx_ring->Fbr0offset);
+
+ bufsize =
+ (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
+
+ pci_free_consistent(adapter->pdev,
+ bufsize,
+ rx_ring->pFbr0RingVa, rx_ring->pFbr0RingPa);
+
+ rx_ring->pFbr0RingVa = NULL;
+ }
+#endif
+
+ /* Free Packet Status Ring */
+ if (rx_ring->pPSRingVa) {
+ rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa -
+ rx_ring->pPSRingOffset);
+
+ pktStatRingSize =
+ sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
+
+ pci_free_consistent(adapter->pdev,
+ pktStatRingSize + 0x0fff,
+ rx_ring->pPSRingVa, rx_ring->pPSRingPa);
+
+ rx_ring->pPSRingVa = NULL;
+ }
+
+ /* Free area of memory for the writeback of status information */
+ if (rx_ring->pRxStatusVa) {
+ rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa -
+ rx_ring->RxStatusOffset);
+
+ pci_free_consistent(adapter->pdev,
+ sizeof(RX_STATUS_BLOCK_t) + 0x7,
+ rx_ring->pRxStatusVa, rx_ring->pRxStatusPa);
+
+ rx_ring->pRxStatusVa = NULL;
+ }
+
+ /* Free receive buffer pool */
+
+ /* Free receive packet pool */
+
+ /* Destroy the lookaside (RFD) pool */
+ if (MP_TEST_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE)) {
+ kmem_cache_destroy(rx_ring->RecvLookaside);
+ MP_CLEAR_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
+ }
+
+ /* Free the FBR Lookup Table */
+#ifdef USE_FBR0
+ kfree(rx_ring->Fbr[0]);
+#endif
+
+ kfree(rx_ring->Fbr[1]);
+
+ /* Reset Counters */
+ rx_ring->nReadyRecv = 0;
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_init_recv - Initialize receive data structures.
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ */
+int et131x_init_recv(struct et131x_adapter *adapter)
+{
+ int status = -ENOMEM;
+ PMP_RFD pMpRfd = NULL;
+ uint32_t RfdCount;
+ uint32_t TotalNumRfd = 0;
+ RX_RING_t *rx_ring = NULL;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup some convenience pointers */
+ rx_ring = (RX_RING_t *) & adapter->RxRing;
+
+ /* Setup each RFD */
+ for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) {
+ pMpRfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside,
+ GFP_ATOMIC | GFP_DMA);
+
+ if (!pMpRfd) {
+ DBG_ERROR(et131x_dbginfo,
+ "Couldn't alloc RFD out of kmem_cache\n");
+ status = -ENOMEM;
+ continue;
+ }
+
+ status = et131x_rfd_resources_alloc(adapter, pMpRfd);
+ if (status != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "Couldn't alloc packet for RFD\n");
+ kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+ continue;
+ }
+
+ /* Add this RFD to the RecvList */
+ list_add_tail(&pMpRfd->list_node, &rx_ring->RecvList);
+
+ /* Increment both the available RFD's, and the total RFD's. */
+ rx_ring->nReadyRecv++;
+ TotalNumRfd++;
+ }
+
+ if (TotalNumRfd > NIC_MIN_NUM_RFD) {
+ status = 0;
+ }
+
+ rx_ring->NumRfd = TotalNumRfd;
+
+ if (status != 0) {
+ kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
+ DBG_ERROR(et131x_dbginfo,
+ "Allocation problems in et131x_init_recv\n");
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_rfd_resources_alloc
+ * @adapter: pointer to our private adapter structure
+ * @pMpRfd: pointer to a RFD
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h)
+ */
+int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+{
+ pMpRfd->Packet = NULL;
+
+ return 0;
+}
+
+/**
+ * et131x_rfd_resources_free - Free the packet allocated for the given RFD
+ * @adapter: pointer to our private adapter structure
+ * @pMpRfd: pointer to a RFD
+ */
+void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
+{
+ pMpRfd->Packet = NULL;
+ kmem_cache_free(adapter->RxRing.RecvLookaside, pMpRfd);
+}
+
+/**
+ * ConfigRxDmaRegs - Start of Rx_DMA init sequence
+ * @pAdapter: pointer to our adapter structure
+ */
+void ConfigRxDmaRegs(struct et131x_adapter *pAdapter)
+{
+ struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
+ struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+ PFBR_DESC_t pFbrEntry;
+ uint32_t iEntry;
+ RXDMA_PSR_NUM_DES_t psr_num_des;
+ unsigned long lockflags;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Halt RXDMA to perform the reconfigure. */
+ et131x_rx_dma_disable(pAdapter);
+
+ /* Load the completion writeback physical address
+ *
+ * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here
+ * before storing the adjusted address.
+ */
+ writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32),
+ &pRxDma->dma_wb_base_hi);
+ writel((uint32_t) pRxLocal->RxStatusRealPA, &pRxDma->dma_wb_base_lo);
+
+ memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
+
+ /* Set the address and parameters of the packet status ring into the
+ * 1310's registers
+ */
+ writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32),
+ &pRxDma->psr_base_hi);
+ writel((uint32_t) pRxLocal->pPSRingRealPa, &pRxDma->psr_base_lo);
+ writel(pRxLocal->PsrNumEntries - 1, &pRxDma->psr_num_des.value);
+ writel(0, &pRxDma->psr_full_offset.value);
+
+ psr_num_des.value = readl(&pRxDma->psr_num_des.value);
+ writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100,
+ &pRxDma->psr_min_des.value);
+
+ spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+
+ /* These local variables track the PSR in the adapter structure */
+ pRxLocal->local_psr_full.bits.psr_full = 0;
+ pRxLocal->local_psr_full.bits.psr_full_wrap = 0;
+
+ /* Now's the best time to initialize FBR1 contents */
+ pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa;
+ for (iEntry = 0; iEntry < pRxLocal->Fbr1NumEntries; iEntry++) {
+ pFbrEntry->addr_hi = pRxLocal->Fbr[1]->PAHigh[iEntry];
+ pFbrEntry->addr_lo = pRxLocal->Fbr[1]->PALow[iEntry];
+ pFbrEntry->word2.bits.bi = iEntry;
+ pFbrEntry++;
+ }
+
+ /* Set the address and parameters of Free buffer ring 1 (and 0 if
+ * required) into the 1310's registers
+ */
+ writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &pRxDma->fbr1_base_hi);
+ writel((uint32_t) pRxLocal->Fbr1Realpa, &pRxDma->fbr1_base_lo);
+ writel(pRxLocal->Fbr1NumEntries - 1, &pRxDma->fbr1_num_des.value);
+
+ {
+ DMA10W_t fbr1_full = { 0 };
+
+ fbr1_full.bits.val = 0;
+ fbr1_full.bits.wrap = 1;
+ writel(fbr1_full.value, &pRxDma->fbr1_full_offset.value);
+ }
+
+ /* This variable tracks the free buffer ring 1 full position, so it
+ * has to match the above.
+ */
+ pRxLocal->local_Fbr1_full.bits.val = 0;
+ pRxLocal->local_Fbr1_full.bits.wrap = 1;
+ writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ &pRxDma->fbr1_min_des.value);
+
+#ifdef USE_FBR0
+ /* Now's the best time to initialize FBR0 contents */
+ pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa;
+ for (iEntry = 0; iEntry < pRxLocal->Fbr0NumEntries; iEntry++) {
+ pFbrEntry->addr_hi = pRxLocal->Fbr[0]->PAHigh[iEntry];
+ pFbrEntry->addr_lo = pRxLocal->Fbr[0]->PALow[iEntry];
+ pFbrEntry->word2.bits.bi = iEntry;
+ pFbrEntry++;
+ }
+
+ writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &pRxDma->fbr0_base_hi);
+ writel((uint32_t) pRxLocal->Fbr0Realpa, &pRxDma->fbr0_base_lo);
+ writel(pRxLocal->Fbr0NumEntries - 1, &pRxDma->fbr0_num_des.value);
+
+ {
+ DMA10W_t fbr0_full = { 0 };
+
+ fbr0_full.bits.val = 0;
+ fbr0_full.bits.wrap = 1;
+ writel(fbr0_full.value, &pRxDma->fbr0_full_offset.value);
+ }
+
+ /* This variable tracks the free buffer ring 0 full position, so it
+ * has to match the above.
+ */
+ pRxLocal->local_Fbr0_full.bits.val = 0;
+ pRxLocal->local_Fbr0_full.bits.wrap = 1;
+ writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
+ &pRxDma->fbr0_min_des.value);
+#endif
+
+ /* Program the number of packets we will receive before generating an
+ * interrupt.
+ * For version B silicon, this value gets updated once autoneg is
+ *complete.
+ */
+ writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value);
+
+ /* The "time_done" is not working correctly to coalesce interrupts
+ * after a given time period, but rather is giving us an interrupt
+ * regardless of whether we have received packets.
+ * This value gets updated once autoneg is complete.
+ */
+ writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value);
+
+ spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * SetRxDmaTimer - Set the heartbeat timer according to line rate.
+ * @pAdapter: pointer to our adapter structure
+ */
+void SetRxDmaTimer(struct et131x_adapter *pAdapter)
+{
+ /* For version B silicon, we do not use the RxDMA timer for 10 and 100
+ * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
+ */
+ if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) ||
+ (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) {
+ writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value);
+ writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value);
+ }
+}
+
+/**
+ * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_rx_dma_disable(struct et131x_adapter *pAdapter)
+{
+ RXDMA_CSR_t csr;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup the receive dma configuration register */
+ writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value);
+ csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+ if (csr.bits.halt_status != 1) {
+ udelay(5);
+ csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+ if (csr.bits.halt_status != 1) {
+ DBG_ERROR(et131x_dbginfo,
+ "RX Dma failed to enter halt state. CSR 0x%08x\n",
+ csr.value);
+ }
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310.
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_rx_dma_enable(struct et131x_adapter *pAdapter)
+{
+ DBG_RX_ENTER(et131x_dbginfo);
+
+ if (pAdapter->RegistryPhyLoopbk) {
+ /* RxDMA is disabled for loopback operation. */
+ writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value);
+ } else {
+ /* Setup the receive dma configuration register for normal operation */
+ RXDMA_CSR_t csr = { 0 };
+
+ csr.bits.fbr1_enable = 1;
+ if (pAdapter->RxRing.Fbr1BufferSize == 4096) {
+ csr.bits.fbr1_size = 1;
+ } else if (pAdapter->RxRing.Fbr1BufferSize == 8192) {
+ csr.bits.fbr1_size = 2;
+ } else if (pAdapter->RxRing.Fbr1BufferSize == 16384) {
+ csr.bits.fbr1_size = 3;
+ }
+#ifdef USE_FBR0
+ csr.bits.fbr0_enable = 1;
+ if (pAdapter->RxRing.Fbr0BufferSize == 256) {
+ csr.bits.fbr0_size = 1;
+ } else if (pAdapter->RxRing.Fbr0BufferSize == 512) {
+ csr.bits.fbr0_size = 2;
+ } else if (pAdapter->RxRing.Fbr0BufferSize == 1024) {
+ csr.bits.fbr0_size = 3;
+ }
+#endif
+ writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value);
+
+ csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+ if (csr.bits.halt_status != 0) {
+ udelay(5);
+ csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
+ if (csr.bits.halt_status != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "RX Dma failed to exit halt state. CSR 0x%08x\n",
+ csr.value);
+ }
+ }
+ }
+
+ DBG_RX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * nic_rx_pkts - Checks the hardware for available packets
+ * @pAdapter: pointer to our adapter
+ *
+ * Returns pMpRfd, a pointer to our MPRFD.
+ *
+ * Checks the hardware for available packets, using completion ring
+ * If packets are available, it gets an RFD from the RecvList, attaches
+ * the packet to it, puts the RFD in the RecvPendList, and also returns
+ * the pointer to the RFD.
+ */
+PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter)
+{
+ struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+ PRX_STATUS_BLOCK_t pRxStatusBlock;
+ PPKT_STAT_DESC_t pPSREntry;
+ PMP_RFD pMpRfd;
+ uint32_t nIndex;
+ uint8_t *pBufVa;
+ unsigned long lockflags;
+ struct list_head *element;
+ uint8_t ringIndex;
+ uint16_t bufferIndex;
+ uint32_t localLen;
+ PKT_STAT_DESC_WORD0_t Word0;
+
+
+ DBG_RX_ENTER(et131x_dbginfo);
+
+ /* RX Status block is written by the DMA engine prior to every
+ * interrupt. It contains the next to be used entry in the Packet
+ * Status Ring, and also the two Free Buffer rings.
+ */
+ pRxStatusBlock = (PRX_STATUS_BLOCK_t) pRxLocal->pRxStatusVa;
+
+ if (pRxStatusBlock->Word1.bits.PSRoffset ==
+ pRxLocal->local_psr_full.bits.psr_full &&
+ pRxStatusBlock->Word1.bits.PSRwrap ==
+ pRxLocal->local_psr_full.bits.psr_full_wrap) {
+ /* Looks like this ring is not updated yet */
+ DBG_RX(et131x_dbginfo, "(0)\n");
+ DBG_RX_LEAVE(et131x_dbginfo);
+ return NULL;
+ }
+
+ /* The packet status ring indicates that data is available. */
+ pPSREntry = (PPKT_STAT_DESC_t) (pRxLocal->pPSRingVa) +
+ pRxLocal->local_psr_full.bits.psr_full;
+
+ /* Grab any information that is required once the PSR is
+ * advanced, since we can no longer rely on the memory being
+ * accurate
+ */
+ localLen = pPSREntry->word1.bits.length;
+ ringIndex = (uint8_t) pPSREntry->word1.bits.ri;
+ bufferIndex = (uint16_t) pPSREntry->word1.bits.bi;
+ Word0 = pPSREntry->word0;
+
+ DBG_RX(et131x_dbginfo, "RX PACKET STATUS\n");
+ DBG_RX(et131x_dbginfo, "\tlength : %d\n", localLen);
+ DBG_RX(et131x_dbginfo, "\tringIndex : %d\n", ringIndex);
+ DBG_RX(et131x_dbginfo, "\tbufferIndex : %d\n", bufferIndex);
+ DBG_RX(et131x_dbginfo, "\tword0 : 0x%08x\n", Word0.value);
+
+#if 0
+ /* Check the Status Word that the MAC has appended to the PSR
+ * entry in case the MAC has detected errors.
+ */
+ if (Word0.value & ALCATEL_BAD_STATUS) {
+ DBG_ERROR(et131x_dbginfo,
+ "NICRxPkts >> Alcatel Status Word error."
+ "Value 0x%08x\n", pPSREntry->word0.value);
+ }
+#endif
+
+ /* Indicate that we have used this PSR entry. */
+ if (++pRxLocal->local_psr_full.bits.psr_full >
+ pRxLocal->PsrNumEntries - 1) {
+ pRxLocal->local_psr_full.bits.psr_full = 0;
+ pRxLocal->local_psr_full.bits.psr_full_wrap ^= 1;
+ }
+
+ writel(pRxLocal->local_psr_full.value,
+ &pAdapter->CSRAddress->rxdma.psr_full_offset.value);
+
+#ifndef USE_FBR0
+ if (ringIndex != 1) {
+ DBG_ERROR(et131x_dbginfo,
+ "NICRxPkts PSR Entry %d indicates "
+ "Buffer Ring 0 in use\n",
+ pRxLocal->local_psr_full.bits.psr_full);
+ DBG_RX_LEAVE(et131x_dbginfo);
+ return NULL;
+ }
+#endif
+
+#ifdef USE_FBR0
+ if (ringIndex > 1 ||
+ (ringIndex == 0 &&
+ bufferIndex > pRxLocal->Fbr0NumEntries - 1) ||
+ (ringIndex == 1 &&
+ bufferIndex > pRxLocal->Fbr1NumEntries - 1))
+#else
+ if (ringIndex != 1 ||
+ bufferIndex > pRxLocal->Fbr1NumEntries - 1)
+#endif
+ {
+ /* Illegal buffer or ring index cannot be used by S/W*/
+ DBG_ERROR(et131x_dbginfo,
+ "NICRxPkts PSR Entry %d indicates "
+ "length of %d and/or bad bi(%d)\n",
+ pRxLocal->local_psr_full.bits.psr_full,
+ localLen, bufferIndex);
+ DBG_RX_LEAVE(et131x_dbginfo);
+ return NULL;
+ }
+
+ /* Get and fill the RFD. */
+ spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+
+ pMpRfd = NULL;
+ element = pRxLocal->RecvList.next;
+ pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+
+ if (pMpRfd == NULL) {
+ DBG_RX(et131x_dbginfo,
+ "NULL RFD returned from RecvList via list_entry()\n");
+ DBG_RX_LEAVE(et131x_dbginfo);
+ spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+ return NULL;
+ }
+
+ list_del(&pMpRfd->list_node);
+ pRxLocal->nReadyRecv--;
+
+ spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+ pMpRfd->iBufferIndex = bufferIndex;
+ pMpRfd->iRingIndex = ringIndex;
+
+ /* In V1 silicon, there is a bug which screws up filtering of
+ * runt packets. Therefore runt packet filtering is disabled
+ * in the MAC and the packets are dropped here. They are
+ * also counted here.
+ */
+ if (localLen < (NIC_MIN_PACKET_SIZE + 4)) {
+ pAdapter->Stats.other_errors++;
+ localLen = 0;
+ }
+
+ if (localLen) {
+ if (pAdapter->ReplicaPhyLoopbk == 1) {
+ pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex];
+
+ if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0],
+ ETH_ALEN) == 0) {
+ if (memcmp(&pBufVa[42], "Replica packet",
+ ETH_HLEN)) {
+ pAdapter->ReplicaPhyLoopbkPF = 1;
+ }
+ }
+ DBG_WARNING(et131x_dbginfo,
+ "pBufVa:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+ pBufVa[6], pBufVa[7], pBufVa[8],
+ pBufVa[9], pBufVa[10], pBufVa[11]);
+
+ DBG_WARNING(et131x_dbginfo,
+ "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+ pAdapter->CurrentAddress[0],
+ pAdapter->CurrentAddress[1],
+ pAdapter->CurrentAddress[2],
+ pAdapter->CurrentAddress[3],
+ pAdapter->CurrentAddress[4],
+ pAdapter->CurrentAddress[5]);
+ }
+
+ /* Determine if this is a multicast packet coming in */
+ if ((Word0.value & ALCATEL_MULTICAST_PKT) &&
+ !(Word0.value & ALCATEL_BROADCAST_PKT)) {
+ /* Promiscuous mode and Multicast mode are
+ * not mutually exclusive as was first
+ * thought. I guess Promiscuous is just
+ * considered a super-set of the other
+ * filters. Generally filter is 0x2b when in
+ * promiscuous mode.
+ */
+ if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST)
+ && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS)
+ && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
+ pBufVa = pRxLocal->Fbr[ringIndex]->
+ Va[bufferIndex];
+
+ /* Loop through our list to see if the
+ * destination address of this packet
+ * matches one in our list.
+ */
+ for (nIndex = 0;
+ nIndex < pAdapter->MCAddressCount;
+ nIndex++) {
+ if (pBufVa[0] ==
+ pAdapter->MCList[nIndex][0]
+ && pBufVa[1] ==
+ pAdapter->MCList[nIndex][1]
+ && pBufVa[2] ==
+ pAdapter->MCList[nIndex][2]
+ && pBufVa[3] ==
+ pAdapter->MCList[nIndex][3]
+ && pBufVa[4] ==
+ pAdapter->MCList[nIndex][4]
+ && pBufVa[5] ==
+ pAdapter->MCList[nIndex][5]) {
+ break;
+ }
+ }
+
+ /* If our index is equal to the number
+ * of Multicast address we have, then
+ * this means we did not find this
+ * packet's matching address in our
+ * list. Set the PacketSize to zero,
+ * so we free our RFD when we return
+ * from this function.
+ */
+ if (nIndex == pAdapter->MCAddressCount) {
+ localLen = 0;
+ }
+ }
+
+ if (localLen > 0) {
+ pAdapter->Stats.multircv++;
+ }
+ } else if (Word0.value & ALCATEL_BROADCAST_PKT) {
+ pAdapter->Stats.brdcstrcv++;
+ } else {
+ /* Not sure what this counter measures in
+ * promiscuous mode. Perhaps we should check
+ * the MAC address to see if it is directed
+ * to us in promiscuous mode.
+ */
+ pAdapter->Stats.unircv++;
+ }
+ }
+
+ if (localLen > 0) {
+ struct sk_buff *skb = NULL;
+
+ //pMpRfd->PacketSize = localLen - 4;
+ pMpRfd->PacketSize = localLen;
+
+ skb = dev_alloc_skb(pMpRfd->PacketSize + 2);
+ if (!skb) {
+ DBG_ERROR(et131x_dbginfo,
+ "Couldn't alloc an SKB for Rx\n");
+ DBG_RX_LEAVE(et131x_dbginfo);
+ return NULL;
+ }
+
+ pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize;
+
+ memcpy(skb_put(skb, pMpRfd->PacketSize),
+ pRxLocal->Fbr[ringIndex]->Va[bufferIndex],
+ pMpRfd->PacketSize);
+
+ skb->dev = pAdapter->netdev;
+ skb->protocol = eth_type_trans(skb, pAdapter->netdev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ netif_rx(skb);
+ } else {
+ pMpRfd->PacketSize = 0;
+ }
+
+ nic_return_rfd(pAdapter, pMpRfd);
+
+ DBG_RX(et131x_dbginfo, "(1)\n");
+ DBG_RX_LEAVE(et131x_dbginfo);
+ return pMpRfd;
+}
+
+/**
+ * et131x_reset_recv - Reset the receive list
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption, Rcv spinlock has been acquired.
+ */
+void et131x_reset_recv(struct et131x_adapter *pAdapter)
+{
+ PMP_RFD pMpRfd;
+ struct list_head *element;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList));
+
+ /* Take all the RFD's from the pending list, and stick them on the
+ * RecvList.
+ */
+ while (!list_empty(&pAdapter->RxRing.RecvPendingList)) {
+ element = pAdapter->RxRing.RecvPendingList.next;
+
+ pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
+
+ list_del(&pMpRfd->list_node);
+ list_add_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_handle_recv_interrupt - Interrupt handler for receive processing
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption, Rcv spinlock has been acquired.
+ */
+void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter)
+{
+ PMP_RFD pMpRfd = NULL;
+ struct sk_buff *PacketArray[NUM_PACKETS_HANDLED];
+ PMP_RFD RFDFreeArray[NUM_PACKETS_HANDLED];
+ uint32_t PacketArrayCount = 0;
+ uint32_t PacketsToHandle;
+ uint32_t PacketFreeCount = 0;
+ bool TempUnfinishedRec = false;
+
+ DBG_RX_ENTER(et131x_dbginfo);
+
+ PacketsToHandle = NUM_PACKETS_HANDLED;
+
+ /* Process up to available RFD's */
+ while (PacketArrayCount < PacketsToHandle) {
+ if (list_empty(&pAdapter->RxRing.RecvList)) {
+ DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0);
+ DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n");
+ TempUnfinishedRec = true;
+ break;
+ }
+
+ pMpRfd = nic_rx_pkts(pAdapter);
+
+ if (pMpRfd == NULL) {
+ break;
+ }
+
+ /* Do not receive any packets until a filter has been set.
+ * Do not receive any packets until we are at D0.
+ * Do not receive any packets until we have link.
+ * If length is zero, return the RFD in order to advance the
+ * Free buffer ring.
+ */
+ if ((!pAdapter->PacketFilter) ||
+ (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) ||
+ (!MP_LINK_DETECTED(pAdapter)) ||
+ (pMpRfd->PacketSize == 0)) {
+ continue;
+ }
+
+ /* Increment the number of packets we received */
+ pAdapter->Stats.ipackets++;
+
+ /* Set the status on the packet, either resources or success */
+ if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) {
+ /* Put this RFD on the pending list
+ *
+ * NOTE: nic_rx_pkts() above is already returning the
+ * RFD to the RecvList, so don't additionally do that
+ * here.
+ * Besides, we don't really need (at this point) the
+ * pending list anyway.
+ */
+ //spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags );
+ //list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList );
+ //spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags );
+
+ /* Update the number of outstanding Recvs */
+ //MP_INC_RCV_REF( pAdapter );
+ } else {
+ RFDFreeArray[PacketFreeCount] = pMpRfd;
+ PacketFreeCount++;
+
+ DBG_WARNING(et131x_dbginfo,
+ "RFD's are running out !!!!!!!!!!!!!\n");
+ }
+
+ PacketArray[PacketArrayCount] = pMpRfd->Packet;
+ PacketArrayCount++;
+ }
+
+ if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) {
+ pAdapter->RxRing.UnfinishedReceives = true;
+ writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+ &pAdapter->CSRAddress->global.watchdog_timer);
+ } else {
+ /* Watchdog timer will disable itself if appropriate. */
+ pAdapter->RxRing.UnfinishedReceives = false;
+ }
+
+ DBG_RX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * NICReturnRFD - Recycle a RFD and put it back onto the receive list
+ * @pAdapter: pointer to our adapter
+ * @pMpRfd: pointer to the RFD
+ */
+void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd)
+{
+ struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
+ struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
+ uint16_t bi = pMpRfd->iBufferIndex;
+ uint8_t ri = pMpRfd->iRingIndex;
+ unsigned long lockflags;
+
+ DBG_RX_ENTER(et131x_dbginfo);
+
+ /* We don't use any of the OOB data besides status. Otherwise, we
+ * need to clean up OOB data
+ */
+ if (
+#ifdef USE_FBR0
+ (ri == 0 && bi < pRxLocal->Fbr0NumEntries) ||
+#endif
+ (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) {
+ spin_lock_irqsave(&pAdapter->FbrLock, lockflags);
+
+ if (ri == 1) {
+ PFBR_DESC_t pNextDesc =
+ (PFBR_DESC_t) (pRxLocal->pFbr1RingVa) +
+ pRxLocal->local_Fbr1_full.bits.val;
+
+ /* Handle the Free Buffer Ring advancement here. Write
+ * the PA / Buffer Index for the returned buffer into
+ * the oldest (next to be freed)FBR entry
+ */
+ pNextDesc->addr_hi = pRxLocal->Fbr[1]->PAHigh[bi];
+ pNextDesc->addr_lo = pRxLocal->Fbr[1]->PALow[bi];
+ pNextDesc->word2.value = bi;
+
+ if (++pRxLocal->local_Fbr1_full.bits.val >
+ (pRxLocal->Fbr1NumEntries - 1)) {
+ pRxLocal->local_Fbr1_full.bits.val = 0;
+ pRxLocal->local_Fbr1_full.bits.wrap ^= 1;
+ }
+
+ writel(pRxLocal->local_Fbr1_full.value,
+ &pRxDma->fbr1_full_offset.value);
+ }
+#ifdef USE_FBR0
+ else {
+ PFBR_DESC_t pNextDesc =
+ (PFBR_DESC_t) pRxLocal->pFbr0RingVa +
+ pRxLocal->local_Fbr0_full.bits.val;
+
+ /* Handle the Free Buffer Ring advancement here. Write
+ * the PA / Buffer Index for the returned buffer into
+ * the oldest (next to be freed) FBR entry
+ */
+ pNextDesc->addr_hi = pRxLocal->Fbr[0]->PAHigh[bi];
+ pNextDesc->addr_lo = pRxLocal->Fbr[0]->PALow[bi];
+ pNextDesc->word2.value = bi;
+
+ if (++pRxLocal->local_Fbr0_full.bits.val >
+ (pRxLocal->Fbr0NumEntries - 1)) {
+ pRxLocal->local_Fbr0_full.bits.val = 0;
+ pRxLocal->local_Fbr0_full.bits.wrap ^= 1;
+ }
+
+ writel(pRxLocal->local_Fbr0_full.value,
+ &pRxDma->fbr0_full_offset.value);
+ }
+#endif
+ spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags);
+ } else {
+ DBG_ERROR(et131x_dbginfo,
+ "NICReturnRFD illegal Buffer Index returned\n");
+ }
+
+ /* The processing on this RFD is done, so put it back on the tail of
+ * our list
+ */
+ spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
+ list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList);
+ pRxLocal->nReadyRecv++;
+ spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
+
+ DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd);
+ DBG_RX_LEAVE(et131x_dbginfo);
+}
diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h
new file mode 100644
index 0000000..ea66dbc
--- /dev/null
+++ b/drivers/staging/et131x/et1310_rx.h
@@ -0,0 +1,373 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_rx.h - Defines, structs, enums, prototypes, etc. pertaining to data
+ * reception.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_RX_H__
+#define __ET1310_RX_H__
+
+#include "et1310_address_map.h"
+
+#define USE_FBR0 true
+
+#ifdef USE_FBR0
+//#define FBR0_BUFFER_SIZE 256
+#endif
+
+//#define FBR1_BUFFER_SIZE 2048
+
+#define FBR_CHUNKS 32
+
+#define MAX_DESC_PER_RING_RX 1024
+
+/* number of RFDs - default and min */
+#ifdef USE_FBR0
+#define RFD_LOW_WATER_MARK 40
+#define NIC_MIN_NUM_RFD 64
+#define NIC_DEFAULT_NUM_RFD 1024
+#else
+#define RFD_LOW_WATER_MARK 20
+#define NIC_MIN_NUM_RFD 64
+#define NIC_DEFAULT_NUM_RFD 256
+#endif
+
+#define NUM_PACKETS_HANDLED 256
+
+#define ALCATEL_BAD_STATUS 0xe47f0000
+#define ALCATEL_MULTICAST_PKT 0x01000000
+#define ALCATEL_BROADCAST_PKT 0x02000000
+
+/* typedefs for Free Buffer Descriptors */
+typedef union _FBR_WORD2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 reserved:22; // bits 10-31
+ u32 bi:10; // bits 0-9(Buffer Index)
+#else
+ u32 bi:10; // bits 0-9(Buffer Index)
+ u32 reserved:22; // bit 10-31
+#endif
+ } bits;
+} FBR_WORD2_t, *PFBR_WORD2_t;
+
+typedef struct _FBR_DESC_t {
+ u32 addr_lo;
+ u32 addr_hi;
+ FBR_WORD2_t word2;
+} FBR_DESC_t, *PFBR_DESC_t;
+
+/* Typedefs for Packet Status Ring Descriptors */
+typedef union _PKT_STAT_DESC_WORD0_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ // top 16 bits are from the Alcatel Status Word as enumerated in
+ // PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2)
+#if 0
+ u32 asw_trunc:1; // bit 31(Rx frame truncated)
+#endif
+ u32 asw_long_evt:1; // bit 31(Rx long event)
+ u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected)
+ u32 asw_unsupported_op:1; // bit 29(unsupported OP code)
+ u32 asw_pause_frame:1; // bit 28(is a pause frame)
+ u32 asw_control_frame:1; // bit 27(is a control frame)
+ u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP)
+ u32 asw_broadcast:1; // bit 25(has a broadcast address)
+ u32 asw_multicast:1; // bit 24(has a multicast address)
+ u32 asw_OK:1; // bit 23(valid CRC + no code error)
+ u32 asw_too_long:1; // bit 22(frame length > 1518 bytes)
+ u32 asw_len_chk_err:1; // bit 21(frame length field incorrect)
+ u32 asw_CRC_err:1; // bit 20(CRC error)
+ u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors)
+ u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet)
+ u32 asw_RX_DV_event:1; // bit 17(short receive event detected)
+ u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous)
+ u32 unused:5; // bits 11-15
+ u32 vp:1; // bit 10(VLAN Packet)
+ u32 jp:1; // bit 9(Jumbo Packet)
+ u32 ft:1; // bit 8(Frame Truncated)
+ u32 drop:1; // bit 7(Drop packet)
+ u32 rxmac_error:1; // bit 6(RXMAC Error Indicator)
+ u32 wol:1; // bit 5(WOL Event)
+ u32 tcpp:1; // bit 4(TCP checksum pass)
+ u32 tcpa:1; // bit 3(TCP checksum assist)
+ u32 ipp:1; // bit 2(IP checksum pass)
+ u32 ipa:1; // bit 1(IP checksum assist)
+ u32 hp:1; // bit 0(hash pass)
+#else
+ u32 hp:1; // bit 0(hash pass)
+ u32 ipa:1; // bit 1(IP checksum assist)
+ u32 ipp:1; // bit 2(IP checksum pass)
+ u32 tcpa:1; // bit 3(TCP checksum assist)
+ u32 tcpp:1; // bit 4(TCP checksum pass)
+ u32 wol:1; // bit 5(WOL Event)
+ u32 rxmac_error:1; // bit 6(RXMAC Error Indicator)
+ u32 drop:1; // bit 7(Drop packet)
+ u32 ft:1; // bit 8(Frame Truncated)
+ u32 jp:1; // bit 9(Jumbo Packet)
+ u32 vp:1; // bit 10(VLAN Packet)
+ u32 unused:5; // bits 11-15
+ u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous)
+ u32 asw_RX_DV_event:1; // bit 17(short receive event detected)
+ u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet)
+ u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors)
+ u32 asw_CRC_err:1; // bit 20(CRC error)
+ u32 asw_len_chk_err:1; // bit 21(frame length field incorrect)
+ u32 asw_too_long:1; // bit 22(frame length > 1518 bytes)
+ u32 asw_OK:1; // bit 23(valid CRC + no code error)
+ u32 asw_multicast:1; // bit 24(has a multicast address)
+ u32 asw_broadcast:1; // bit 25(has a broadcast address)
+ u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP)
+ u32 asw_control_frame:1; // bit 27(is a control frame)
+ u32 asw_pause_frame:1; // bit 28(is a pause frame)
+ u32 asw_unsupported_op:1; // bit 29(unsupported OP code)
+ u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected)
+ u32 asw_long_evt:1; // bit 31(Rx long event)
+#if 0
+ u32 asw_trunc:1; // bit 31(Rx frame truncated)
+#endif
+#endif
+ } bits;
+} PKT_STAT_DESC_WORD0_t, *PPKT_STAT_WORD0_t;
+
+typedef union _PKT_STAT_DESC_WORD1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:4; // bits 28-31
+ u32 ri:2; // bits 26-27(Ring Index)
+ u32 bi:10; // bits 16-25(Buffer Index)
+ u32 length:16; // bit 0-15(length in bytes)
+#else
+ u32 length:16; // bit 0-15(length in bytes)
+ u32 bi:10; // bits 16-25(Buffer Index)
+ u32 ri:2; // bits 26-27(Ring Index)
+ u32 unused:4; // bits 28-31
+#endif
+ } bits;
+} PKT_STAT_DESC_WORD1_t, *PPKT_STAT_WORD1_t;
+
+typedef struct _PKT_STAT_DESC_t {
+ PKT_STAT_DESC_WORD0_t word0;
+ PKT_STAT_DESC_WORD1_t word1;
+} PKT_STAT_DESC_t, *PPKT_STAT_DESC_t;
+
+/* Typedefs for the RX DMA status word */
+
+/*
+ * RXSTAT_WORD0_t structure holds part of the status bits of the Rx DMA engine
+ * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word
+ * whichcontains Free Buffer ring 0 and 1 available offset.
+ */
+typedef union _rxstat_word0_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 FBR1unused:5; // bits 27-31
+ u32 FBR1wrap:1; // bit 26
+ u32 FBR1offset:10; // bits 16-25
+ u32 FBR0unused:5; // bits 11-15
+ u32 FBR0wrap:1; // bit 10
+ u32 FBR0offset:10; // bits 0-9
+#else
+ u32 FBR0offset:10; // bits 0-9
+ u32 FBR0wrap:1; // bit 10
+ u32 FBR0unused:5; // bits 11-15
+ u32 FBR1offset:10; // bits 16-25
+ u32 FBR1wrap:1; // bit 26
+ u32 FBR1unused:5; // bits 27-31
+#endif
+ } bits;
+} RXSTAT_WORD0_t, *PRXSTAT_WORD0_t;
+
+/*
+ * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine
+ * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word
+ * which contains the Packet Status Ring available offset.
+ */
+typedef union _rxstat_word1_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 PSRunused:3; // bits 29-31
+ u32 PSRwrap:1; // bit 28
+ u32 PSRoffset:12; // bits 16-27
+ u32 reserved:16; // bits 0-15
+#else
+ u32 reserved:16; // bits 0-15
+ u32 PSRoffset:12; // bits 16-27
+ u32 PSRwrap:1; // bit 28
+ u32 PSRunused:3; // bits 29-31
+#endif
+ } bits;
+} RXSTAT_WORD1_t, *PRXSTAT_WORD1_t;
+
+/*
+ * RX_STATUS_BLOCK_t is sructure representing the status of the Rx DMA engine
+ * it sits in free memory, and is pointed to by 0x101c / 0x1020
+ */
+typedef struct _rx_status_block_t {
+ RXSTAT_WORD0_t Word0;
+ RXSTAT_WORD1_t Word1;
+} RX_STATUS_BLOCK_t, *PRX_STATUS_BLOCK_t;
+
+/*
+ * Structure for look-up table holding free buffer ring pointers
+ */
+typedef struct _FbrLookupTable {
+ void *Va[MAX_DESC_PER_RING_RX];
+ void *Buffer1[MAX_DESC_PER_RING_RX];
+ void *Buffer2[MAX_DESC_PER_RING_RX];
+ u32 PAHigh[MAX_DESC_PER_RING_RX];
+ u32 PALow[MAX_DESC_PER_RING_RX];
+} FBRLOOKUPTABLE, *PFBRLOOKUPTABLE;
+
+typedef enum {
+ ONE_PACKET_INTERRUPT,
+ FOUR_PACKET_INTERRUPT
+} eRX_INTERRUPT_STATE_t, *PeRX_INTERRUPT_STATE_t;
+
+/*
+ * Structure to hold the skb's in a list
+ */
+typedef struct rx_skb_list_elem {
+ struct list_head skb_list_elem;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+} RX_SKB_LIST_ELEM, *PRX_SKB_LIST_ELEM;
+
+/*
+ * RX_RING_t is sructure representing the adaptor's local reference(s) to the
+ * rings
+ */
+typedef struct _rx_ring_t {
+#ifdef USE_FBR0
+ void *pFbr0RingVa;
+ dma_addr_t pFbr0RingPa;
+ void *Fbr0MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+ dma_addr_t Fbr0MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+ uint64_t Fbr0Realpa;
+ uint64_t Fbr0offset;
+ DMA10W_t local_Fbr0_full;
+ u32 Fbr0NumEntries;
+ u32 Fbr0BufferSize;
+#endif
+ void *pFbr1RingVa;
+ dma_addr_t pFbr1RingPa;
+ void *Fbr1MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+ dma_addr_t Fbr1MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
+ uint64_t Fbr1Realpa;
+ uint64_t Fbr1offset;
+ FBRLOOKUPTABLE *Fbr[2];
+ DMA10W_t local_Fbr1_full;
+ u32 Fbr1NumEntries;
+ u32 Fbr1BufferSize;
+
+ void *pPSRingVa;
+ dma_addr_t pPSRingPa;
+ uint64_t pPSRingRealPa;
+ uint64_t pPSRingOffset;
+ RXDMA_PSR_FULL_OFFSET_t local_psr_full;
+ u32 PsrNumEntries;
+
+ void *pRxStatusVa;
+ dma_addr_t pRxStatusPa;
+ uint64_t RxStatusRealPA;
+ uint64_t RxStatusOffset;
+
+ struct list_head RecvBufferPool;
+
+ /* RECV */
+ struct list_head RecvList;
+ struct list_head RecvPendingList;
+ u32 nReadyRecv;
+
+ u32 NumRfd;
+
+ bool UnfinishedReceives;
+
+ struct list_head RecvPacketPool;
+
+ /* lookaside lists */
+ struct kmem_cache *RecvLookaside;
+} RX_RING_t, *PRX_RING_t;
+
+/* Forward reference of RFD */
+struct _MP_RFD;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* PROTOTYPES for Initialization */
+int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter);
+void et131x_rx_dma_memory_free(struct et131x_adapter *adapter);
+int et131x_rfd_resources_alloc(struct et131x_adapter *adapter,
+ struct _MP_RFD *pMpRfd);
+void et131x_rfd_resources_free(struct et131x_adapter *adapter,
+ struct _MP_RFD *pMpRfd);
+int et131x_init_recv(struct et131x_adapter *adapter);
+
+void ConfigRxDmaRegs(struct et131x_adapter *adapter);
+void SetRxDmaTimer(struct et131x_adapter *adapter);
+void et131x_rx_dma_disable(struct et131x_adapter *adapter);
+void et131x_rx_dma_enable(struct et131x_adapter *adapter);
+
+void et131x_reset_recv(struct et131x_adapter *adapter);
+
+void et131x_handle_recv_interrupt(struct et131x_adapter *adapter);
+
+#endif /* __ET1310_RX_H__ */
diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c
new file mode 100644
index 0000000..a95c260
--- /dev/null
+++ b/drivers/staging/et131x/et1310_tx.c
@@ -0,0 +1,1525 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_tx.c - Routines used to perform data transmission.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_isr.h"
+
+#include "et1310_tx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+static void et131x_update_tcb_list(struct et131x_adapter *pAdapter);
+static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter);
+static inline void et131x_free_send_packet(struct et131x_adapter *pAdapter,
+ PMP_TCB pMpTcb);
+static int et131x_send_packet(struct sk_buff *skb,
+ struct et131x_adapter *pAdapter);
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb);
+
+/**
+ * et131x_tx_dma_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h).
+ *
+ * Allocates memory that will be visible both to the device and to the CPU.
+ * The OS will pass us packets, pointers to which we will insert in the Tx
+ * Descriptor queue. The device will read this queue to find the packets in
+ * memory. The device will update the "status" in memory each time it xmits a
+ * packet.
+ */
+int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter)
+{
+ int desc_size = 0;
+ TX_RING_t *tx_ring = &adapter->TxRing;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Allocate memory for the TCB's (Transmit Control Block) */
+ adapter->TxRing.MpTcbMem = (MP_TCB *) kcalloc(NUM_TCB, sizeof(MP_TCB),
+ GFP_ATOMIC | GFP_DMA);
+ if (!adapter->TxRing.MpTcbMem) {
+ DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for TCBs\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Allocate enough memory for the Tx descriptor ring, and allocate
+ * some extra so that the ring can be aligned on a 4k boundary.
+ */
+ desc_size = (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1;
+ tx_ring->pTxDescRingVa =
+ (PTX_DESC_ENTRY_t) pci_alloc_consistent(adapter->pdev, desc_size,
+ &tx_ring->pTxDescRingPa);
+ if (!adapter->TxRing.pTxDescRingVa) {
+ DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for Tx Ring\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Save physical address
+ *
+ * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here before
+ * storing the adjusted address.
+ */
+ tx_ring->pTxDescRingAdjustedPa = tx_ring->pTxDescRingPa;
+
+ /* Align Tx Descriptor Ring on a 4k (0x1000) byte boundary */
+ et131x_align_allocated_memory(adapter,
+ &tx_ring->pTxDescRingAdjustedPa,
+ &tx_ring->TxDescOffset, 0x0FFF);
+
+ tx_ring->pTxDescRingVa += tx_ring->TxDescOffset;
+
+ /* Allocate memory for the Tx status block */
+ tx_ring->pTxStatusVa = pci_alloc_consistent(adapter->pdev,
+ sizeof(TX_STATUS_BLOCK_t),
+ &tx_ring->pTxStatusPa);
+ if (!adapter->TxRing.pTxStatusPa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Tx status block\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for a dummy buffer */
+ tx_ring->pTxDummyBlkVa = pci_alloc_consistent(adapter->pdev,
+ NIC_MIN_PACKET_SIZE,
+ &tx_ring->pTxDummyBlkPa);
+ if (!adapter->TxRing.pTxDummyBlkPa) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot alloc memory for Tx dummy buffer\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/**
+ * et131x_tx_dma_memory_free - Free all memory allocated within this module
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success and errno on failure (as defined in errno.h).
+ */
+void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
+{
+ int desc_size = 0;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ if (adapter->TxRing.pTxDescRingVa) {
+ /* Free memory relating to Tx rings here */
+ adapter->TxRing.pTxDescRingVa -= adapter->TxRing.TxDescOffset;
+
+ desc_size =
+ (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1;
+
+ pci_free_consistent(adapter->pdev,
+ desc_size,
+ adapter->TxRing.pTxDescRingVa,
+ adapter->TxRing.pTxDescRingPa);
+
+ adapter->TxRing.pTxDescRingVa = NULL;
+ }
+
+ /* Free memory for the Tx status block */
+ if (adapter->TxRing.pTxStatusVa) {
+ pci_free_consistent(adapter->pdev,
+ sizeof(TX_STATUS_BLOCK_t),
+ adapter->TxRing.pTxStatusVa,
+ adapter->TxRing.pTxStatusPa);
+
+ adapter->TxRing.pTxStatusVa = NULL;
+ }
+
+ /* Free memory for the dummy buffer */
+ if (adapter->TxRing.pTxDummyBlkVa) {
+ pci_free_consistent(adapter->pdev,
+ NIC_MIN_PACKET_SIZE,
+ adapter->TxRing.pTxDummyBlkVa,
+ adapter->TxRing.pTxDummyBlkPa);
+
+ adapter->TxRing.pTxDummyBlkVa = NULL;
+ }
+
+ /* Free the memory for MP_TCB structures */
+ if (adapter->TxRing.MpTcbMem) {
+ kfree(adapter->TxRing.MpTcbMem);
+ adapter->TxRing.MpTcbMem = NULL;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore.
+ * @adapter: pointer to our private adapter structure
+ */
+void ConfigTxDmaRegs(struct et131x_adapter *pAdapter)
+{
+ struct _TXDMA_t __iomem *pTxDma = &pAdapter->CSRAddress->txdma;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Load the hardware with the start of the transmit descriptor ring. */
+ writel((uint32_t) (pAdapter->TxRing.pTxDescRingAdjustedPa >> 32),
+ &pTxDma->pr_base_hi);
+ writel((uint32_t) pAdapter->TxRing.pTxDescRingAdjustedPa,
+ &pTxDma->pr_base_lo);
+
+ /* Initialise the transmit DMA engine */
+ writel(NUM_DESC_PER_RING_TX - 1, &pTxDma->pr_num_des.value);
+
+ /* Load the completion writeback physical address
+ *
+ * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
+ * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
+ * are ever returned, make sure the high part is retrieved here before
+ * storing the adjusted address.
+ */
+ writel(0, &pTxDma->dma_wb_base_hi);
+ writel(pAdapter->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo);
+
+ memset(pAdapter->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t));
+
+ writel(0, &pTxDma->service_request.value);
+ pAdapter->TxRing.txDmaReadyToSend.value = 0;
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
+ * @pAdapter: pointer to our adapter structure
+ */
+void et131x_tx_dma_disable(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup the tramsmit dma configuration register */
+ writel(0x101, &pAdapter->CSRAddress->txdma.csr.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
+ * @pAdapter: pointer to our adapter structure
+ *
+ * Mainly used after a return to the D0 (full-power) state from a lower state.
+ */
+void et131x_tx_dma_enable(struct et131x_adapter *pAdapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ if (pAdapter->RegistryPhyLoopbk) {
+ /* TxDMA is disabled for loopback operation. */
+ writel(0x101, &pAdapter->CSRAddress->txdma.csr.value);
+ } else {
+ TXDMA_CSR_t csr = { 0 };
+
+ /* Setup the transmit dma configuration register for normal
+ * operation
+ */
+ csr.bits.sngl_epkt_mode = 1;
+ csr.bits.halt = 0;
+ csr.bits.cache_thrshld = pAdapter->RegistryDMACache;
+ writel(csr.value, &pAdapter->CSRAddress->txdma.csr.value);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_init_send - Initialize send data structures
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_init_send(struct et131x_adapter *adapter)
+{
+ PMP_TCB pMpTcb;
+ uint32_t TcbCount;
+ TX_RING_t *tx_ring;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Setup some convenience pointers */
+ tx_ring = &adapter->TxRing;
+ pMpTcb = adapter->TxRing.MpTcbMem;
+
+ tx_ring->TCBReadyQueueHead = pMpTcb;
+
+ /* Go through and set up each TCB */
+ for (TcbCount = 0; TcbCount < NUM_TCB; TcbCount++) {
+ memset(pMpTcb, 0, sizeof(MP_TCB));
+
+ /* Set the link pointer in HW TCB to the next TCB in the
+ * chain. If this is the last TCB in the chain, also set the
+ * tail pointer.
+ */
+ if (TcbCount < NUM_TCB - 1) {
+ pMpTcb->Next = pMpTcb + 1;
+ } else {
+ tx_ring->TCBReadyQueueTail = pMpTcb;
+ pMpTcb->Next = (PMP_TCB) NULL;
+ }
+
+ pMpTcb++;
+ }
+
+ /* Curr send queue should now be empty */
+ tx_ring->CurrSendHead = (PMP_TCB) NULL;
+ tx_ring->CurrSendTail = (PMP_TCB) NULL;
+
+ INIT_LIST_HEAD(&adapter->TxRing.SendWaitQueue);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_send_packets - This function is called by the OS to send packets
+ * @skb: the packet(s) to send
+ * @netdev:device on which to TX the above packet(s)
+ *
+ * Return 0 in almost all cases; non-zero value in extreme hard failure only
+ */
+int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
+{
+ int status = 0;
+ struct et131x_adapter *pAdapter = NULL;
+
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ pAdapter = netdev_priv(netdev);
+
+ /* Send these packets
+ *
+ * NOTE: The Linux Tx entry point is only given one packet at a time
+ * to Tx, so the PacketCount and it's array used makes no sense here
+ */
+
+ /* Queue is not empty or TCB is not available */
+ if (!list_empty(&pAdapter->TxRing.SendWaitQueue) ||
+ MP_TCB_RESOURCES_NOT_AVAILABLE(pAdapter)) {
+ /* NOTE: If there's an error on send, no need to queue the
+ * packet under Linux; if we just send an error up to the
+ * netif layer, it will resend the skb to us.
+ */
+ DBG_VERBOSE(et131x_dbginfo, "TCB Resources Not Available\n");
+ status = -ENOMEM;
+ } else {
+ /* We need to see if the link is up; if it's not, make the
+ * netif layer think we're good and drop the packet
+ */
+ //if( MP_SHOULD_FAIL_SEND( pAdapter ) || pAdapter->DriverNoPhyAccess )
+ if (MP_SHOULD_FAIL_SEND(pAdapter) || pAdapter->DriverNoPhyAccess
+ || !netif_carrier_ok(netdev)) {
+ DBG_VERBOSE(et131x_dbginfo,
+ "Can't Tx, Link is DOWN; drop the packet\n");
+
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+
+ pAdapter->net_stats.tx_dropped++;
+ } else {
+ status = et131x_send_packet(skb, pAdapter);
+
+ if (status == -ENOMEM) {
+
+ /* NOTE: If there's an error on send, no need
+ * to queue the packet under Linux; if we just
+ * send an error up to the netif layer, it
+ * will resend the skb to us.
+ */
+ DBG_WARNING(et131x_dbginfo,
+ "Resources problem, Queue tx packet\n");
+ } else if (status != 0) {
+ /* On any other error, make netif think we're
+ * OK and drop the packet
+ */
+ DBG_WARNING(et131x_dbginfo,
+ "General error, drop packet\n");
+
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+
+ pAdapter->net_stats.tx_dropped++;
+ }
+ }
+ }
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_send_packet - Do the work to send a packet
+ * @skb: the packet(s) to send
+ * @pAdapter: a pointer to the device's private adapter structure
+ *
+ * Return 0 in almost all cases; non-zero value in extreme hard failure only.
+ *
+ * Assumption: Send spinlock has been acquired
+ */
+static int et131x_send_packet(struct sk_buff *skb,
+ struct et131x_adapter *pAdapter)
+{
+ int status = 0;
+ PMP_TCB pMpTcb = NULL;
+ uint16_t *pShBufVa;
+ unsigned long lockflags;
+
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ /* Is our buffer scattered, or continuous? */
+ if (skb_shinfo(skb)->nr_frags == 0) {
+ DBG_TX(et131x_dbginfo, "Scattered buffer: NO\n");
+ } else {
+ DBG_TX(et131x_dbginfo, "Scattered buffer: YES, Num Frags: %d\n",
+ skb_shinfo(skb)->nr_frags);
+ }
+
+ /* All packets must have at least a MAC address and a protocol type */
+ if (skb->len < ETH_HLEN) {
+ DBG_ERROR(et131x_dbginfo,
+ "Packet size < ETH_HLEN (14 bytes)\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* Get a TCB for this packet */
+ spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+ pMpTcb = pAdapter->TxRing.TCBReadyQueueHead;
+
+ if (pMpTcb == NULL) {
+ spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+ DBG_WARNING(et131x_dbginfo, "Can't obtain a TCB\n");
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return -ENOMEM;
+ }
+
+ pAdapter->TxRing.TCBReadyQueueHead = pMpTcb->Next;
+
+ if (pAdapter->TxRing.TCBReadyQueueHead == NULL) {
+ pAdapter->TxRing.TCBReadyQueueTail = NULL;
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+ pMpTcb->PacketLength = skb->len;
+ pMpTcb->Packet = skb;
+
+ if ((skb->data != NULL) && ((skb->len - skb->data_len) >= 6)) {
+ pShBufVa = (uint16_t *) skb->data;
+
+ if ((pShBufVa[0] == 0xffff) &&
+ (pShBufVa[1] == 0xffff) && (pShBufVa[2] == 0xffff)) {
+ MP_SET_FLAG(pMpTcb, fMP_DEST_BROAD);
+ } else if ((pShBufVa[0] & 0x3) == 0x0001) {
+ MP_SET_FLAG(pMpTcb, fMP_DEST_MULTI);
+ }
+ }
+
+ pMpTcb->Next = NULL;
+
+ /* Call the NIC specific send handler. */
+ if (status == 0) {
+ status = nic_send_packet(pAdapter, pMpTcb);
+ }
+
+ if (status != 0) {
+ spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+ if (pAdapter->TxRing.TCBReadyQueueTail) {
+ pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb;
+ } else {
+ /* Apparently ready Q is empty. */
+ pAdapter->TxRing.TCBReadyQueueHead = pMpTcb;
+ }
+
+ pAdapter->TxRing.TCBReadyQueueTail = pMpTcb;
+
+ spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return status;
+ }
+
+ DBG_ASSERT(pAdapter->TxRing.nBusySend <= NUM_TCB);
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/**
+ * nic_send_packet - NIC specific send handler for version B silicon.
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Returns 0 or errno.
+ */
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+ uint32_t loopIndex;
+ TX_DESC_ENTRY_t CurDesc[24];
+ uint32_t FragmentNumber = 0;
+ uint32_t iThisCopy, iRemainder;
+ struct sk_buff *pPacket = pMpTcb->Packet;
+ uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1;
+ struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0];
+ unsigned long lockflags1, lockflags2;
+
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ /* Part of the optimizations of this send routine restrict us to
+ * sending 24 fragments at a pass. In practice we should never see
+ * more than 5 fragments.
+ *
+ * NOTE: The older version of this function (below) can handle any
+ * number of fragments. If needed, we can call this function,
+ * although it is less efficient.
+ */
+ if (FragListCount > 23) {
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ memset(CurDesc, 0, sizeof(TX_DESC_ENTRY_t) * (FragListCount + 1));
+
+ for (loopIndex = 0; loopIndex < FragListCount; loopIndex++) {
+ /* If there is something in this element, lets get a
+ * descriptor from the ring and get the necessary data
+ */
+ if (loopIndex == 0) {
+ /* If the fragments are smaller than a standard MTU,
+ * then map them to a single descriptor in the Tx
+ * Desc ring. However, if they're larger, as is
+ * possible with support for jumbo packets, then
+ * split them each across 2 descriptors.
+ *
+ * This will work until we determine why the hardware
+ * doesn't seem to like large fragments.
+ */
+ if ((pPacket->len - pPacket->data_len) <= 1514) {
+ DBG_TX(et131x_dbginfo,
+ "Got packet of length %d, "
+ "filling desc entry %d, "
+ "TCB: 0x%p\n",
+ (pPacket->len - pPacket->data_len),
+ pAdapter->TxRing.txDmaReadyToSend.bits.
+ val, pMpTcb);
+
+ CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+ CurDesc[FragmentNumber].word2.bits.
+ length_in_bytes =
+ pPacket->len - pPacket->data_len;
+
+ /* NOTE: Here, the dma_addr_t returned from
+ * pci_map_single() is implicitly cast as a
+ * uint32_t. Although dma_addr_t can be
+ * 64-bit, the address returned by
+ * pci_map_single() is always 32-bit
+ * addressable (as defined by the pci/dma
+ * subsystem)
+ */
+ CurDesc[FragmentNumber++].DataBufferPtrLow =
+ pci_map_single(pAdapter->pdev,
+ pPacket->data,
+ pPacket->len -
+ pPacket->data_len,
+ PCI_DMA_TODEVICE);
+ } else {
+ DBG_TX(et131x_dbginfo,
+ "Got packet of length %d, "
+ "filling desc entry %d, "
+ "TCB: 0x%p\n",
+ (pPacket->len - pPacket->data_len),
+ pAdapter->TxRing.txDmaReadyToSend.bits.
+ val, pMpTcb);
+
+ CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+ CurDesc[FragmentNumber].word2.bits.
+ length_in_bytes =
+ ((pPacket->len - pPacket->data_len) / 2);
+
+ /* NOTE: Here, the dma_addr_t returned from
+ * pci_map_single() is implicitly cast as a
+ * uint32_t. Although dma_addr_t can be
+ * 64-bit, the address returned by
+ * pci_map_single() is always 32-bit
+ * addressable (as defined by the pci/dma
+ * subsystem)
+ */
+ CurDesc[FragmentNumber++].DataBufferPtrLow =
+ pci_map_single(pAdapter->pdev,
+ pPacket->data,
+ ((pPacket->len -
+ pPacket->data_len) / 2),
+ PCI_DMA_TODEVICE);
+ CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+ CurDesc[FragmentNumber].word2.bits.
+ length_in_bytes =
+ ((pPacket->len - pPacket->data_len) / 2);
+
+ /* NOTE: Here, the dma_addr_t returned from
+ * pci_map_single() is implicitly cast as a
+ * uint32_t. Although dma_addr_t can be
+ * 64-bit, the address returned by
+ * pci_map_single() is always 32-bit
+ * addressable (as defined by the pci/dma
+ * subsystem)
+ */
+ CurDesc[FragmentNumber++].DataBufferPtrLow =
+ pci_map_single(pAdapter->pdev,
+ pPacket->data +
+ ((pPacket->len -
+ pPacket->data_len) / 2),
+ ((pPacket->len -
+ pPacket->data_len) / 2),
+ PCI_DMA_TODEVICE);
+ }
+ } else {
+ DBG_TX(et131x_dbginfo,
+ "Got packet of length %d,"
+ "filling desc entry %d\n"
+ "TCB: 0x%p\n",
+ pFragList[loopIndex].size,
+ pAdapter->TxRing.txDmaReadyToSend.bits.val,
+ pMpTcb);
+
+ CurDesc[FragmentNumber].DataBufferPtrHigh = 0;
+
+ CurDesc[FragmentNumber].word2.bits.length_in_bytes =
+ pFragList[loopIndex - 1].size;
+
+ /* NOTE: Here, the dma_addr_t returned from
+ * pci_map_page() is implicitly cast as a uint32_t.
+ * Although dma_addr_t can be 64-bit, the address
+ * returned by pci_map_page() is always 32-bit
+ * addressable (as defined by the pci/dma subsystem)
+ */
+ CurDesc[FragmentNumber++].DataBufferPtrLow =
+ pci_map_page(pAdapter->pdev,
+ pFragList[loopIndex - 1].page,
+ pFragList[loopIndex - 1].page_offset,
+ pFragList[loopIndex - 1].size,
+ PCI_DMA_TODEVICE);
+ }
+ }
+
+ if (FragmentNumber == 0) {
+ DBG_WARNING(et131x_dbginfo, "No. frags is 0\n");
+ return -EIO;
+ }
+
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+ if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt ==
+ pAdapter->RegistryTxNumBuffers) {
+ CurDesc[FragmentNumber - 1].word3.value = 0x5;
+ pAdapter->TxRing.TxPacketsSinceLastinterrupt = 0;
+ } else {
+ CurDesc[FragmentNumber - 1].word3.value = 0x1;
+ }
+ } else {
+ CurDesc[FragmentNumber - 1].word3.value = 0x5;
+ }
+
+ CurDesc[0].word3.bits.f = 1;
+
+ pMpTcb->WrIndexStart = pAdapter->TxRing.txDmaReadyToSend;
+ pMpTcb->PacketStaleCount = 0;
+
+ spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1);
+
+ iThisCopy =
+ NUM_DESC_PER_RING_TX - pAdapter->TxRing.txDmaReadyToSend.bits.val;
+
+ if (iThisCopy >= FragmentNumber) {
+ iRemainder = 0;
+ iThisCopy = FragmentNumber;
+ } else {
+ iRemainder = FragmentNumber - iThisCopy;
+ }
+
+ memcpy(pAdapter->TxRing.pTxDescRingVa +
+ pAdapter->TxRing.txDmaReadyToSend.bits.val, CurDesc,
+ sizeof(TX_DESC_ENTRY_t) * iThisCopy);
+
+ pAdapter->TxRing.txDmaReadyToSend.bits.val += iThisCopy;
+
+ if ((pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) ||
+ (pAdapter->TxRing.txDmaReadyToSend.bits.val ==
+ NUM_DESC_PER_RING_TX)) {
+ if (pAdapter->TxRing.txDmaReadyToSend.bits.wrap) {
+ pAdapter->TxRing.txDmaReadyToSend.value = 0;
+ } else {
+ pAdapter->TxRing.txDmaReadyToSend.value = 0x400;
+ }
+ }
+
+ if (iRemainder) {
+ memcpy(pAdapter->TxRing.pTxDescRingVa,
+ CurDesc + iThisCopy,
+ sizeof(TX_DESC_ENTRY_t) * iRemainder);
+
+ pAdapter->TxRing.txDmaReadyToSend.bits.val += iRemainder;
+ }
+
+ if (pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) {
+ if (pAdapter->TxRing.txDmaReadyToSend.value) {
+ pMpTcb->WrIndex.value = NUM_DESC_PER_RING_TX - 1;
+ } else {
+ pMpTcb->WrIndex.value =
+ 0x400 | (NUM_DESC_PER_RING_TX - 1);
+ }
+ } else {
+ pMpTcb->WrIndex.value =
+ pAdapter->TxRing.txDmaReadyToSend.value - 1;
+ }
+
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2);
+
+ if (pAdapter->TxRing.CurrSendTail) {
+ pAdapter->TxRing.CurrSendTail->Next = pMpTcb;
+ } else {
+ pAdapter->TxRing.CurrSendHead = pMpTcb;
+ }
+
+ pAdapter->TxRing.CurrSendTail = pMpTcb;
+
+ DBG_ASSERT(pMpTcb->Next == NULL);
+
+ pAdapter->TxRing.nBusySend++;
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2);
+
+ /* Write the new write pointer back to the device. */
+ writel(pAdapter->TxRing.txDmaReadyToSend.value,
+ &pAdapter->CSRAddress->txdma.service_request.value);
+
+ /* For Gig only, we use Tx Interrupt coalescing. Enable the software
+ * timer to wake us up if this packet isn't followed by N more.
+ */
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+ writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+ &pAdapter->CSRAddress->global.watchdog_timer);
+ }
+
+ spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/*
+ * NOTE: For now, keep this older version of NICSendPacket around for
+ * reference, even though it's not used
+ */
+#if 0
+
+/**
+ * NICSendPacket - NIC specific send handler.
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Returns 0 on succes, errno on failure.
+ *
+ * This version of the send routine is designed for version A silicon.
+ * Assumption - Send spinlock has been acquired.
+ */
+static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+ uint32_t loopIndex, fragIndex, loopEnd;
+ uint32_t iSplitFirstElement = 0;
+ uint32_t SegmentSize = 0;
+ TX_DESC_ENTRY_t CurDesc;
+ TX_DESC_ENTRY_t *CurDescPostCopy = NULL;
+ uint32_t SlotsAvailable;
+ DMA10W_t ServiceComplete;
+ unsigned int lockflags1, lockflags2;
+ struct sk_buff *pPacket = pMpTcb->Packet;
+ uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1;
+ struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0];
+
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ ServiceComplete.value =
+ readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value);
+
+ /*
+ * Attempt to fix TWO hardware bugs:
+ * 1) NEVER write an odd number of descriptors.
+ * 2) If packet length is less than NIC_MIN_PACKET_SIZE, then pad the
+ * packet to NIC_MIN_PACKET_SIZE bytes by adding a new last
+ * descriptor IN HALF DUPLEX MODE ONLY
+ * NOTE that (2) interacts with (1). If the packet is less than
+ * NIC_MIN_PACKET_SIZE bytes then we will append a descriptor.
+ * Therefore if it is even now, it will eventually end up odd, and
+ * so will need adjusting.
+ *
+ * VLAN tags get involved since VLAN tags add another one or two
+ * segments.
+ */
+ DBG_TX(et131x_dbginfo,
+ "pMpTcb->PacketLength: %d\n", pMpTcb->PacketLength);
+
+ if ((pAdapter->uiDuplexMode == 0)
+ && (pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE)) {
+ DBG_TX(et131x_dbginfo,
+ "HALF DUPLEX mode AND len < MIN_PKT_SIZE\n");
+ if ((FragListCount & 0x1) == 0) {
+ DBG_TX(et131x_dbginfo,
+ "Even number of descs, split 1st elem\n");
+ iSplitFirstElement = 1;
+ //SegmentSize = pFragList[0].size / 2;
+ SegmentSize = (pPacket->len - pPacket->data_len) / 2;
+ }
+ } else if (FragListCount & 0x1) {
+ DBG_TX(et131x_dbginfo, "Odd number of descs, split 1st elem\n");
+
+ iSplitFirstElement = 1;
+ //SegmentSize = pFragList[0].size / 2;
+ SegmentSize = (pPacket->len - pPacket->data_len) / 2;
+ }
+
+ spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1);
+
+ if (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req_wrap ==
+ ServiceComplete.bits.serv_cpl_wrap) {
+ /* The ring hasn't wrapped. Slots available should be
+ * (RING_SIZE) - the difference between the two pointers.
+ */
+ SlotsAvailable = NUM_DESC_PER_RING_TX -
+ (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req -
+ ServiceComplete.bits.serv_cpl);
+ } else {
+ /* The ring has wrapped. Slots available should be the
+ * difference between the two pointers.
+ */
+ SlotsAvailable = ServiceComplete.bits.serv_cpl -
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+ }
+
+ if ((FragListCount + iSplitFirstElement) > SlotsAvailable) {
+ DBG_WARNING(et131x_dbginfo,
+ "Not Enough Space in Tx Desc Ring\n");
+ spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+ return -ENOMEM;
+ }
+
+ loopEnd = (FragListCount) + iSplitFirstElement;
+ fragIndex = 0;
+
+ DBG_TX(et131x_dbginfo,
+ "TCB : 0x%p\n"
+ "Packet (SKB) : 0x%p\t Packet->len: %d\t Packet->data_len: %d\n"
+ "FragListCount : %d\t iSplitFirstElement: %d\t loopEnd:%d\n",
+ pMpTcb,
+ pPacket, pPacket->len, pPacket->data_len,
+ FragListCount, iSplitFirstElement, loopEnd);
+
+ for (loopIndex = 0; loopIndex < loopEnd; loopIndex++) {
+ if (loopIndex > iSplitFirstElement) {
+ fragIndex++;
+ }
+
+ DBG_TX(et131x_dbginfo,
+ "In loop, loopIndex: %d\t fragIndex: %d\n", loopIndex,
+ fragIndex);
+
+ /* If there is something in this element, let's get a
+ * descriptor from the ring and get the necessary data
+ */
+ DBG_TX(et131x_dbginfo,
+ "Packet Length %d,"
+ "filling desc entry %d\n",
+ pPacket->len,
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req);
+
+ // NOTE - Should we do a paranoia check here to make sure the fragment
+ // actually has a length? It's HIGHLY unlikely the fragment would
+ // contain no data...
+ if (1) {
+ // NOTE - Currently always getting 32-bit addrs, and dma_addr_t is
+ // only 32-bit, so leave "high" ptr value out for now
+ CurDesc.DataBufferPtrHigh = 0;
+
+ CurDesc.word2.value = 0;
+ CurDesc.word3.value = 0;
+
+ if (fragIndex == 0) {
+ if (iSplitFirstElement) {
+ DBG_TX(et131x_dbginfo,
+ "Split first element: YES\n");
+
+ if (loopIndex == 0) {
+ DBG_TX(et131x_dbginfo,
+ "Got fragment of length %d, fragIndex: %d\n",
+ pPacket->len -
+ pPacket->data_len,
+ fragIndex);
+ DBG_TX(et131x_dbginfo,
+ "SegmentSize: %d\n",
+ SegmentSize);
+
+ CurDesc.word2.bits.
+ length_in_bytes =
+ SegmentSize;
+ CurDesc.DataBufferPtrLow =
+ pci_map_single(pAdapter->
+ pdev,
+ pPacket->
+ data,
+ SegmentSize,
+ PCI_DMA_TODEVICE);
+ DBG_TX(et131x_dbginfo,
+ "pci_map_single() returns: 0x%08x\n",
+ CurDesc.
+ DataBufferPtrLow);
+ } else {
+ DBG_TX(et131x_dbginfo,
+ "Got fragment of length %d, fragIndex: %d\n",
+ pPacket->len -
+ pPacket->data_len,
+ fragIndex);
+ DBG_TX(et131x_dbginfo,
+ "Leftover Size: %d\n",
+ (pPacket->len -
+ pPacket->data_len -
+ SegmentSize));
+
+ CurDesc.word2.bits.
+ length_in_bytes =
+ ((pPacket->len -
+ pPacket->data_len) -
+ SegmentSize);
+ CurDesc.DataBufferPtrLow =
+ pci_map_single(pAdapter->
+ pdev,
+ (pPacket->
+ data +
+ SegmentSize),
+ (pPacket->
+ len -
+ pPacket->
+ data_len -
+ SegmentSize),
+ PCI_DMA_TODEVICE);
+ DBG_TX(et131x_dbginfo,
+ "pci_map_single() returns: 0x%08x\n",
+ CurDesc.
+ DataBufferPtrLow);
+ }
+ } else {
+ DBG_TX(et131x_dbginfo,
+ "Split first element: NO\n");
+
+ CurDesc.word2.bits.length_in_bytes =
+ pPacket->len - pPacket->data_len;
+
+ CurDesc.DataBufferPtrLow =
+ pci_map_single(pAdapter->pdev,
+ pPacket->data,
+ (pPacket->len -
+ pPacket->data_len),
+ PCI_DMA_TODEVICE);
+ DBG_TX(et131x_dbginfo,
+ "pci_map_single() returns: 0x%08x\n",
+ CurDesc.DataBufferPtrLow);
+ }
+ } else {
+
+ CurDesc.word2.bits.length_in_bytes =
+ pFragList[fragIndex - 1].size;
+ CurDesc.DataBufferPtrLow =
+ pci_map_page(pAdapter->pdev,
+ pFragList[fragIndex - 1].page,
+ pFragList[fragIndex -
+ 1].page_offset,
+ pFragList[fragIndex - 1].size,
+ PCI_DMA_TODEVICE);
+ DBG_TX(et131x_dbginfo,
+ "pci_map_page() returns: 0x%08x\n",
+ CurDesc.DataBufferPtrLow);
+ }
+
+ if (loopIndex == 0) {
+ /* This is the first descriptor of the packet
+ *
+ * Set the "f" bit to indicate this is the
+ * first descriptor in the packet.
+ */
+ DBG_TX(et131x_dbginfo,
+ "This is our FIRST descriptor\n");
+ CurDesc.word3.bits.f = 1;
+
+ pMpTcb->WrIndexStart =
+ pAdapter->TxRing.txDmaReadyToSend;
+ }
+
+ if ((loopIndex == (loopEnd - 1)) &&
+ (pAdapter->uiDuplexMode ||
+ (pMpTcb->PacketLength >= NIC_MIN_PACKET_SIZE))) {
+ /* This is the Last descriptor of the packet */
+ DBG_TX(et131x_dbginfo,
+ "THIS is our LAST descriptor\n");
+
+ if (pAdapter->uiLinkSpeed ==
+ TRUEPHY_SPEED_1000MBPS) {
+ if (++pAdapter->TxRing.
+ TxPacketsSinceLastinterrupt >=
+ pAdapter->RegistryTxNumBuffers) {
+ CurDesc.word3.value = 0x5;
+ pAdapter->TxRing.
+ TxPacketsSinceLastinterrupt
+ = 0;
+ } else {
+ CurDesc.word3.value = 0x1;
+ }
+ } else {
+ CurDesc.word3.value = 0x5;
+ }
+
+ /* Following index will be used during freeing
+ * of packet
+ */
+ pMpTcb->WrIndex =
+ pAdapter->TxRing.txDmaReadyToSend;
+ pMpTcb->PacketStaleCount = 0;
+ }
+
+ /* Copy the descriptor (filled above) into the
+ * descriptor ring at the next free entry. Advance
+ * the "next free entry" variable
+ */
+ memcpy(pAdapter->TxRing.pTxDescRingVa +
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+ &CurDesc, sizeof(TX_DESC_ENTRY_t));
+
+ CurDescPostCopy =
+ pAdapter->TxRing.pTxDescRingVa +
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+
+ DBG_TX(et131x_dbginfo,
+ "CURRENT DESCRIPTOR\n"
+ "\tAddress : 0x%p\n"
+ "\tDataBufferPtrHigh : 0x%08x\n"
+ "\tDataBufferPtrLow : 0x%08x\n"
+ "\tword2 : 0x%08x\n"
+ "\tword3 : 0x%08x\n",
+ CurDescPostCopy,
+ CurDescPostCopy->DataBufferPtrHigh,
+ CurDescPostCopy->DataBufferPtrLow,
+ CurDescPostCopy->word2.value,
+ CurDescPostCopy->word3.value);
+
+ if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >=
+ NUM_DESC_PER_RING_TX) {
+ if (pAdapter->TxRing.txDmaReadyToSend.bits.
+ serv_req_wrap) {
+ pAdapter->TxRing.txDmaReadyToSend.
+ value = 0;
+ } else {
+ pAdapter->TxRing.txDmaReadyToSend.
+ value = 0x400;
+ }
+ }
+ }
+ }
+
+ if (pAdapter->uiDuplexMode == 0 &&
+ pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE) {
+ // NOTE - Same 32/64-bit issue as above...
+ CurDesc.DataBufferPtrHigh = 0x0;
+ CurDesc.DataBufferPtrLow = pAdapter->TxRing.pTxDummyBlkPa;
+ CurDesc.word2.value = 0;
+
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+ if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt >=
+ pAdapter->RegistryTxNumBuffers) {
+ CurDesc.word3.value = 0x5;
+ pAdapter->TxRing.TxPacketsSinceLastinterrupt =
+ 0;
+ } else {
+ CurDesc.word3.value = 0x1;
+ }
+ } else {
+ CurDesc.word3.value = 0x5;
+ }
+
+ CurDesc.word2.bits.length_in_bytes =
+ NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength;
+
+ pMpTcb->WrIndex = pAdapter->TxRing.txDmaReadyToSend;
+
+ memcpy(pAdapter->TxRing.pTxDescRingVa +
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+ &CurDesc, sizeof(TX_DESC_ENTRY_t));
+
+ CurDescPostCopy =
+ pAdapter->TxRing.pTxDescRingVa +
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req;
+
+ DBG_TX(et131x_dbginfo,
+ "CURRENT DESCRIPTOR\n"
+ "\tAddress : 0x%p\n"
+ "\tDataBufferPtrHigh : 0x%08x\n"
+ "\tDataBufferPtrLow : 0x%08x\n"
+ "\tword2 : 0x%08x\n"
+ "\tword3 : 0x%08x\n",
+ CurDescPostCopy,
+ CurDescPostCopy->DataBufferPtrHigh,
+ CurDescPostCopy->DataBufferPtrLow,
+ CurDescPostCopy->word2.value,
+ CurDescPostCopy->word3.value);
+
+ if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >=
+ NUM_DESC_PER_RING_TX) {
+ if (pAdapter->TxRing.txDmaReadyToSend.bits.
+ serv_req_wrap) {
+ pAdapter->TxRing.txDmaReadyToSend.value = 0;
+ } else {
+ pAdapter->TxRing.txDmaReadyToSend.value = 0x400;
+ }
+ }
+
+ DBG_TX(et131x_dbginfo, "Padding descriptor %d by %d bytes\n",
+ //pAdapter->TxRing.txDmaReadyToSend.value,
+ pAdapter->TxRing.txDmaReadyToSend.bits.serv_req,
+ NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength);
+ }
+
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2);
+
+ if (pAdapter->TxRing.CurrSendTail) {
+ pAdapter->TxRing.CurrSendTail->Next = pMpTcb;
+ } else {
+ pAdapter->TxRing.CurrSendHead = pMpTcb;
+ }
+
+ pAdapter->TxRing.CurrSendTail = pMpTcb;
+
+ DBG_ASSERT(pMpTcb->Next == NULL);
+
+ pAdapter->TxRing.nBusySend++;
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2);
+
+ /* Write the new write pointer back to the device. */
+ writel(pAdapter->TxRing.txDmaReadyToSend.value,
+ &pAdapter->CSRAddress->txdma.service_request.value);
+
+#ifdef CONFIG_ET131X_DEBUG
+ DumpDeviceBlock(DBG_TX_ON, pAdapter, 1);
+#endif
+
+ /* For Gig only, we use Tx Interrupt coalescing. Enable the software
+ * timer to wake us up if this packet isn't followed by N more.
+ */
+ if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) {
+ writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
+ &pAdapter->CSRAddress->global.watchdog_timer);
+ }
+
+ spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1);
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+#endif
+
+/**
+ * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary
+ * @pAdapter: pointer to our adapter
+ * @pMpTcb: pointer to MP_TCB
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+__inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb)
+{
+ unsigned long lockflags;
+ TX_DESC_ENTRY_t *desc = NULL;
+ struct net_device_stats *stats = &pAdapter->net_stats;
+
+ if (MP_TEST_FLAG(pMpTcb, fMP_DEST_BROAD)) {
+ atomic_inc(&pAdapter->Stats.brdcstxmt);
+ } else if (MP_TEST_FLAG(pMpTcb, fMP_DEST_MULTI)) {
+ atomic_inc(&pAdapter->Stats.multixmt);
+ } else {
+ atomic_inc(&pAdapter->Stats.unixmt);
+ }
+
+ if (pMpTcb->Packet) {
+ stats->tx_bytes += pMpTcb->Packet->len;
+
+ /* Iterate through the TX descriptors on the ring
+ * corresponding to this packet and umap the fragments
+ * they point to
+ */
+ DBG_TX(et131x_dbginfo,
+ "Unmap descriptors Here\n"
+ "TCB : 0x%p\n"
+ "TCB Next : 0x%p\n"
+ "TCB PacketLength : %d\n"
+ "TCB WrIndex.value : 0x%08x\n"
+ "TCB WrIndex.bits.val : %d\n"
+ "TCB WrIndex.value : 0x%08x\n"
+ "TCB WrIndex.bits.val : %d\n",
+ pMpTcb,
+ pMpTcb->Next,
+ pMpTcb->PacketLength,
+ pMpTcb->WrIndexStart.value,
+ pMpTcb->WrIndexStart.bits.val,
+ pMpTcb->WrIndex.value,
+ pMpTcb->WrIndex.bits.val);
+
+ do {
+ desc =
+ (TX_DESC_ENTRY_t *) (pAdapter->TxRing.
+ pTxDescRingVa +
+ pMpTcb->WrIndexStart.bits.val);
+
+ DBG_TX(et131x_dbginfo,
+ "CURRENT DESCRIPTOR\n"
+ "\tAddress : 0x%p\n"
+ "\tDataBufferPtrHigh : 0x%08x\n"
+ "\tDataBufferPtrLow : 0x%08x\n"
+ "\tword2 : 0x%08x\n"
+ "\tword3 : 0x%08x\n",
+ desc,
+ desc->DataBufferPtrHigh,
+ desc->DataBufferPtrLow,
+ desc->word2.value,
+ desc->word3.value);
+
+ pci_unmap_single(pAdapter->pdev,
+ desc->DataBufferPtrLow,
+ desc->word2.value, PCI_DMA_TODEVICE);
+
+ if (++pMpTcb->WrIndexStart.bits.val >=
+ NUM_DESC_PER_RING_TX) {
+ if (pMpTcb->WrIndexStart.bits.wrap) {
+ pMpTcb->WrIndexStart.value = 0;
+ } else {
+ pMpTcb->WrIndexStart.value = 0x400;
+ }
+ }
+ }
+ while (desc != (pAdapter->TxRing.pTxDescRingVa +
+ pMpTcb->WrIndex.bits.val));
+
+ DBG_TX(et131x_dbginfo,
+ "Free Packet (SKB) : 0x%p\n", pMpTcb->Packet);
+
+ dev_kfree_skb_any(pMpTcb->Packet);
+ }
+
+ memset(pMpTcb, 0, sizeof(MP_TCB));
+
+ /* Add the TCB to the Ready Q */
+ spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags);
+
+ pAdapter->Stats.opackets++;
+
+ if (pAdapter->TxRing.TCBReadyQueueTail) {
+ pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb;
+ } else {
+ /* Apparently ready Q is empty. */
+ pAdapter->TxRing.TCBReadyQueueHead = pMpTcb;
+ }
+
+ pAdapter->TxRing.TCBReadyQueueTail = pMpTcb;
+
+ spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags);
+
+ DBG_ASSERT(pAdapter->TxRing.nBusySend >= 0);
+}
+
+/**
+ * et131x_free_busy_send_packets - Free and complete the stopped active sends
+ * @pAdapter: pointer to our adapter
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter)
+{
+ PMP_TCB pMpTcb;
+ struct list_head *pEntry;
+ struct sk_buff *pPacket = NULL;
+ unsigned long lockflags;
+ uint32_t FreeCounter = 0;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ while (!list_empty(&pAdapter->TxRing.SendWaitQueue)) {
+ spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags);
+
+ pAdapter->TxRing.nWaitSend--;
+ spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags);
+
+ pEntry = pAdapter->TxRing.SendWaitQueue.next;
+
+ pPacket = NULL;
+ }
+
+ pAdapter->TxRing.nWaitSend = 0;
+
+ /* Any packets being sent? Check the first TCB on the send list */
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+
+ while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) {
+ PMP_TCB pNext = pMpTcb->Next;
+
+ pAdapter->TxRing.CurrSendHead = pNext;
+
+ if (pNext == NULL) {
+ pAdapter->TxRing.CurrSendTail = NULL;
+ }
+
+ pAdapter->TxRing.nBusySend--;
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+
+ DBG_VERBOSE(et131x_dbginfo, "pMpTcb = 0x%p\n", pMpTcb);
+
+ FreeCounter++;
+ MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+ }
+
+ if (FreeCounter == NUM_TCB) {
+ DBG_ERROR(et131x_dbginfo,
+ "MpFreeBusySendPackets exitted loop for a bad reason\n");
+ BUG();
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+
+ pAdapter->TxRing.nBusySend = 0;
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_handle_send_interrupt - Interrupt handler for sending processing
+ * @pAdapter: pointer to our adapter
+ *
+ * Re-claim the send resources, complete sends and get more to send from
+ * the send wait queue.
+ *
+ * Assumption - Send spinlock has been acquired
+ */
+void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter)
+{
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ /* Mark as completed any packets which have been sent by the device. */
+ et131x_update_tcb_list(pAdapter);
+
+ /* If we queued any transmits because we didn't have any TCBs earlier,
+ * dequeue and send those packets now, as long as we have free TCBs.
+ */
+ et131x_check_send_wait_list(pAdapter);
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_update_tcb_list - Helper routine for Send Interrupt handler
+ * @pAdapter: pointer to our adapter
+ *
+ * Re-claims the send resources and completes sends. Can also be called as
+ * part of the NIC send routine when the "ServiceComplete" indication has
+ * wrapped.
+ */
+static void et131x_update_tcb_list(struct et131x_adapter *pAdapter)
+{
+ unsigned long lockflags;
+ DMA10W_t ServiceComplete;
+ PMP_TCB pMpTcb;
+
+ ServiceComplete.value =
+ readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value);
+
+ /* Has the ring wrapped? Process any descriptors that do not have
+ * the same "wrap" indicator as the current completion indicator
+ */
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+ while (pMpTcb &&
+ ServiceComplete.bits.wrap != pMpTcb->WrIndex.bits.wrap &&
+ ServiceComplete.bits.val < pMpTcb->WrIndex.bits.val) {
+ pAdapter->TxRing.nBusySend--;
+ pAdapter->TxRing.CurrSendHead = pMpTcb->Next;
+ if (pMpTcb->Next == NULL) {
+ pAdapter->TxRing.CurrSendTail = NULL;
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+ MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ /* Goto the next packet */
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+ }
+ while (pMpTcb &&
+ ServiceComplete.bits.wrap == pMpTcb->WrIndex.bits.wrap &&
+ ServiceComplete.bits.val > pMpTcb->WrIndex.bits.val) {
+ pAdapter->TxRing.nBusySend--;
+ pAdapter->TxRing.CurrSendHead = pMpTcb->Next;
+ if (pMpTcb->Next == NULL) {
+ pAdapter->TxRing.CurrSendTail = NULL;
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+ MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb);
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ /* Goto the next packet */
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+ }
+
+ /* Wake up the queue when we hit a low-water mark */
+ if (pAdapter->TxRing.nBusySend <= (NUM_TCB / 3)) {
+ netif_wake_queue(pAdapter->netdev);
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+}
+
+/**
+ * et131x_check_send_wait_list - Helper routine for the interrupt handler
+ * @pAdapter: pointer to our adapter
+ *
+ * Takes packets from the send wait queue and posts them to the device (if
+ * room available).
+ */
+static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter)
+{
+ unsigned long lockflags;
+
+ spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags);
+
+ while (!list_empty(&pAdapter->TxRing.SendWaitQueue) &&
+ MP_TCB_RESOURCES_AVAILABLE(pAdapter)) {
+ struct list_head *pEntry;
+
+ DBG_VERBOSE(et131x_dbginfo, "Tx packets on the wait queue\n");
+
+ pEntry = pAdapter->TxRing.SendWaitQueue.next;
+
+ pAdapter->TxRing.nWaitSend--;
+
+ DBG_WARNING(et131x_dbginfo,
+ "MpHandleSendInterrupt - sent a queued pkt. Waiting %d\n",
+ pAdapter->TxRing.nWaitSend);
+ }
+
+ spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags);
+}
diff --git a/drivers/staging/et131x/et1310_tx.h b/drivers/staging/et131x/et1310_tx.h
new file mode 100644
index 0000000..2819c78
--- /dev/null
+++ b/drivers/staging/et131x/et1310_tx.h
@@ -0,0 +1,242 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et1310_tx.h - Defines, structs, enums, prototypes, etc. pertaining to data
+ * transmission.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET1310_TX_H__
+#define __ET1310_TX_H__
+
+
+/* Typedefs for Tx Descriptor Ring */
+
+/*
+ * TXDESC_WORD2_t structure holds part of the control bits in the Tx Descriptor
+ * ring for the ET-1310
+ */
+typedef union _txdesc_word2_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 vlan_prio:3; // bits 29-31(VLAN priority)
+ u32 vlan_cfi:1; // bit 28(cfi)
+ u32 vlan_tag:12; // bits 16-27(VLAN tag)
+ u32 length_in_bytes:16; // bits 0-15(packet length)
+#else
+ u32 length_in_bytes:16; // bits 0-15(packet length)
+ u32 vlan_tag:12; // bits 16-27(VLAN tag)
+ u32 vlan_cfi:1; // bit 28(cfi)
+ u32 vlan_prio:3; // bits 29-31(VLAN priority)
+#endif /* _BIT_FIELDS_HTOL */
+ } bits;
+} TXDESC_WORD2_t, *PTXDESC_WORD2_t;
+
+/*
+ * TXDESC_WORD3_t structure holds part of the control bits in the Tx Descriptor
+ * ring for the ET-1310
+ */
+typedef union _txdesc_word3_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:17; // bits 15-31
+ u32 udpa:1; // bit 14(UDP checksum assist)
+ u32 tcpa:1; // bit 13(TCP checksum assist)
+ u32 ipa:1; // bit 12(IP checksum assist)
+ u32 vlan:1; // bit 11(append VLAN tag)
+ u32 hp:1; // bit 10(Packet is a Huge packet)
+ u32 pp:1; // bit 9(pad packet)
+ u32 mac:1; // bit 8(MAC override)
+ u32 crc:1; // bit 7(append CRC)
+ u32 e:1; // bit 6(Tx frame has error)
+ u32 pf:1; // bit 5(send pause frame)
+ u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF)
+ u32 cw:1; // bit 3(Control word - no packet data)
+ u32 ir:1; // bit 2(interrupt the processor when this pkt sent)
+ u32 f:1; // bit 1(first packet in the sequence)
+ u32 l:1; // bit 0(last packet in the sequence)
+#else
+ u32 l:1; // bit 0(last packet in the sequence)
+ u32 f:1; // bit 1(first packet in the sequence)
+ u32 ir:1; // bit 2(interrupt the processor when this pkt sent)
+ u32 cw:1; // bit 3(Control word - no packet data)
+ u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF)
+ u32 pf:1; // bit 5(send pause frame)
+ u32 e:1; // bit 6(Tx frame has error)
+ u32 crc:1; // bit 7(append CRC)
+ u32 mac:1; // bit 8(MAC override)
+ u32 pp:1; // bit 9(pad packet)
+ u32 hp:1; // bit 10(Packet is a Huge packet)
+ u32 vlan:1; // bit 11(append VLAN tag)
+ u32 ipa:1; // bit 12(IP checksum assist)
+ u32 tcpa:1; // bit 13(TCP checksum assist)
+ u32 udpa:1; // bit 14(UDP checksum assist)
+ u32 unused:17; // bits 15-31
+#endif /* _BIT_FIELDS_HTOL */
+ } bits;
+} TXDESC_WORD3_t, *PTXDESC_WORD3_t;
+
+/* TX_DESC_ENTRY_t is sructure representing each descriptor on the ring */
+typedef struct _tx_desc_entry_t {
+ u32 DataBufferPtrHigh;
+ u32 DataBufferPtrLow;
+ TXDESC_WORD2_t word2; // control words how to xmit the
+ TXDESC_WORD3_t word3; // data (detailed above)
+} TX_DESC_ENTRY_t, *PTX_DESC_ENTRY_t;
+
+
+/* Typedefs for Tx DMA engine status writeback */
+
+/*
+ * TX_STATUS_BLOCK_t is sructure representing the status of the Tx DMA engine
+ * it sits in free memory, and is pointed to by 0x101c / 0x1020
+ */
+typedef union _tx_status_block_t {
+ u32 value;
+ struct {
+#ifdef _BIT_FIELDS_HTOL
+ u32 unused:21; // bits 11-31
+ u32 serv_cpl_wrap:1; // bit 10
+ u32 serv_cpl:10; // bits 0-9
+#else
+ u32 serv_cpl:10; // bits 0-9
+ u32 serv_cpl_wrap:1; // bit 10
+ u32 unused:21; // bits 11-31
+#endif
+ } bits;
+} TX_STATUS_BLOCK_t, *PTX_STATUS_BLOCK_t;
+
+/* TCB (Transmit Control Block) */
+typedef struct _MP_TCB {
+ struct _MP_TCB *Next;
+ u32 Flags;
+ u32 Count;
+ u32 PacketStaleCount;
+ struct sk_buff *Packet;
+ u32 PacketLength;
+ DMA10W_t WrIndex;
+ DMA10W_t WrIndexStart;
+} MP_TCB, *PMP_TCB;
+
+/* Structure to hold the skb's in a list */
+typedef struct tx_skb_list_elem {
+ struct list_head skb_list_elem;
+ struct sk_buff *skb;
+} TX_SKB_LIST_ELEM, *PTX_SKB_LIST_ELEM;
+
+/* TX_RING_t is sructure representing our local reference(s) to the ring */
+typedef struct _tx_ring_t {
+ /* TCB (Transmit Control Block) memory and lists */
+ PMP_TCB MpTcbMem;
+
+ /* List of TCBs that are ready to be used */
+ PMP_TCB TCBReadyQueueHead;
+ PMP_TCB TCBReadyQueueTail;
+
+ /* list of TCBs that are currently being sent. NOTE that access to all
+ * three of these (including nBusySend) are controlled via the
+ * TCBSendQLock. This lock should be secured prior to incementing /
+ * decrementing nBusySend, or any queue manipulation on CurrSendHead /
+ * Tail
+ */
+ PMP_TCB CurrSendHead;
+ PMP_TCB CurrSendTail;
+ int32_t nBusySend;
+
+ /* List of packets (not TCBs) that were queued for lack of resources */
+ struct list_head SendWaitQueue;
+ int32_t nWaitSend;
+
+ /* The actual descriptor ring */
+ PTX_DESC_ENTRY_t pTxDescRingVa;
+ dma_addr_t pTxDescRingPa;
+ uint64_t pTxDescRingAdjustedPa;
+ uint64_t TxDescOffset;
+
+ /* ReadyToSend indicates where we last wrote to in the descriptor ring. */
+ DMA10W_t txDmaReadyToSend;
+
+ /* The location of the write-back status block */
+ PTX_STATUS_BLOCK_t pTxStatusVa;
+ dma_addr_t pTxStatusPa;
+
+ /* A Block of zeroes used to pad packets that are less than 60 bytes */
+ void *pTxDummyBlkVa;
+ dma_addr_t pTxDummyBlkPa;
+
+ TXMAC_ERR_t TxMacErr;
+
+ /* Variables to track the Tx interrupt coalescing features */
+ int32_t TxPacketsSinceLastinterrupt;
+} TX_RING_t, *PTX_RING_t;
+
+/* Forward declaration of the frag-list for the following prototypes */
+typedef struct _MP_FRAG_LIST MP_FRAG_LIST, *PMP_FRAG_LIST;
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+/* PROTOTYPES for et1310_tx.c */
+int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter);
+void et131x_tx_dma_memory_free(struct et131x_adapter *adapter);
+void ConfigTxDmaRegs(struct et131x_adapter *pAdapter);
+void et131x_init_send(struct et131x_adapter *adapter);
+void et131x_tx_dma_disable(struct et131x_adapter *pAdapter);
+void et131x_tx_dma_enable(struct et131x_adapter *pAdapter);
+void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter);
+void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter);
+int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev);
+
+#endif /* __ET1310_TX_H__ */
diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h
new file mode 100644
index 0000000..36e61a4
--- /dev/null
+++ b/drivers/staging/et131x/et131x_adapter.h
@@ -0,0 +1,347 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_adapter.h - Header which includes the private adapter structure, along
+ * with related support structures, macros, definitions, etc.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_ADAPTER_H__
+#define __ET131X_ADAPTER_H__
+
+#include "et1310_address_map.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+
+/*
+ * Do not change these values: if changed, then change also in respective
+ * TXdma and Rxdma engines
+ */
+#define NUM_DESC_PER_RING_TX 512 // TX Do not change these values
+#define NUM_TCB 64
+
+/*
+ * These values are all superseded by registry entries to facilitate tuning.
+ * Once the desired performance has been achieved, the optimal registry values
+ * should be re-populated to these #defines:
+ */
+#define NUM_TRAFFIC_CLASSES 1
+
+/*
+ * There are three ways of counting errors - if there are more than X errors
+ * in Y packets (represented by the "SAMPLE" macros), if there are more than
+ * N errors in a S mSec time period (the "PERIOD" macros), or if there are
+ * consecutive packets with errors (CONSEC_ERRORED_THRESH). This last covers
+ * for "Bursty" errors, and the errored packets may well not be contiguous,
+ * but several errors where the packet counter has changed by less than a
+ * small amount will cause this count to increment.
+ */
+#define TX_PACKETS_IN_SAMPLE 10000
+#define TX_MAX_ERRORS_IN_SAMPLE 50
+
+#define TX_ERROR_PERIOD 1000
+#define TX_MAX_ERRORS_IN_PERIOD 10
+
+#define LINK_DETECTION_TIMER 5000
+
+#define TX_CONSEC_RANGE 5
+#define TX_CONSEC_ERRORED_THRESH 10
+
+#define LO_MARK_PERCENT_FOR_PSR 15
+#define LO_MARK_PERCENT_FOR_RX 15
+
+/* Macros for flag and ref count operations */
+#define MP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F))
+#define MP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F))
+#define MP_CLEAR_FLAGS(_M) ((_M)->Flags = 0)
+#define MP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0)
+#define MP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
+#define MP_IS_FLAG_CLEAR(_M, _F) (((_M)->Flags & (_F)) == 0)
+
+#define MP_INC_RCV_REF(_A) atomic_inc(&(_A)->RcvRefCount)
+#define MP_DEC_RCV_REF(_A) atomic_dec(&(_A)->RcvRefCount)
+#define MP_GET_RCV_REF(_A) atomic_read(&(_A)->RcvRefCount)
+
+/* Macros specific to the private adapter structure */
+#define MP_TCB_RESOURCES_AVAILABLE(_M) ((_M)->TxRing.nBusySend < NUM_TCB)
+#define MP_TCB_RESOURCES_NOT_AVAILABLE(_M) ((_M)->TxRing.nBusySend >= NUM_TCB)
+
+#define MP_SHOULD_FAIL_SEND(_M) ((_M)->Flags & fMP_ADAPTER_FAIL_SEND_MASK)
+#define MP_IS_NOT_READY(_M) ((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
+#define MP_IS_READY(_M) !((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK)
+
+#define MP_HAS_CABLE(_M) !((_M)->Flags & fMP_ADAPTER_NO_CABLE)
+#define MP_LINK_DETECTED(_M) !((_M)->Flags & fMP_ADAPTER_LINK_DETECTION)
+
+/* Counters for error rate monitoring */
+typedef struct _MP_ERR_COUNTERS {
+ u32 PktCountTxPackets;
+ u32 PktCountTxErrors;
+ u32 TimerBasedTxErrors;
+ u32 PktCountLastError;
+ u32 ErredConsecPackets;
+} MP_ERR_COUNTERS, *PMP_ERR_COUNTERS;
+
+/* RFD (Receive Frame Descriptor) */
+typedef struct _MP_RFD {
+ struct list_head list_node;
+ struct sk_buff *Packet;
+ u32 PacketSize; // total size of receive frame
+ u16 iBufferIndex;
+ u8 iRingIndex;
+} MP_RFD, *PMP_RFD;
+
+/* Enum for Flow Control */
+typedef enum _eflow_control_t {
+ Both = 0,
+ TxOnly = 1,
+ RxOnly = 2,
+ None = 3
+} eFLOW_CONTROL_t, *PeFLOW_CONTROL_t;
+
+/* Struct to define some device statistics */
+typedef struct _ce_stats_t {
+ /* Link Input/Output stats */
+ uint64_t ipackets; // # of in packets
+ uint64_t opackets; // # of out packets
+
+ /* MIB II variables
+ *
+ * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
+ * MUST have 32, then we'll need another way to perform atomic
+ * operations
+ */
+ u32 unircv; // # multicast packets received
+ atomic_t unixmt; // # multicast packets for Tx
+ u32 multircv; // # multicast packets received
+ atomic_t multixmt; // # multicast packets for Tx
+ u32 brdcstrcv; // # broadcast packets received
+ atomic_t brdcstxmt; // # broadcast packets for Tx
+ u32 norcvbuf; // # Rx packets discarded
+ u32 noxmtbuf; // # Tx packets discarded
+
+ /* Transciever state informations. */
+ u8 xcvr_addr;
+ u32 xcvr_id;
+
+ /* Tx Statistics. */
+ u32 tx_uflo; // Tx Underruns
+
+ u32 collisions;
+ u32 excessive_collisions;
+ u32 first_collision;
+ u32 late_collisions;
+ u32 max_pkt_error;
+ u32 tx_deferred;
+
+ /* Rx Statistics. */
+ u32 rx_ov_flow; // Rx Over Flow
+
+ u32 length_err;
+ u32 alignment_err;
+ u32 crc_err;
+ u32 code_violations;
+ u32 other_errors;
+
+#ifdef CONFIG_ET131X_DEBUG
+ u32 UnhandledInterruptsPerSec;
+ u32 RxDmaInterruptsPerSec;
+ u32 TxDmaInterruptsPerSec;
+ u32 WatchDogInterruptsPerSec;
+#endif /* CONFIG_ET131X_DEBUG */
+
+ u32 SynchrounousIterations;
+ INTERRUPT_t InterruptStatus;
+} CE_STATS_t, *PCE_STATS_t;
+
+/* The private adapter structure */
+struct et131x_adapter {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ struct work_struct task;
+
+ /* Flags that indicate current state of the adapter */
+ u32 Flags;
+ u32 HwErrCount;
+
+ /* Configuration */
+ u8 PermanentAddress[ETH_ALEN];
+ u8 CurrentAddress[ETH_ALEN];
+ bool bOverrideAddress;
+ bool bEepromPresent;
+ u8 eepromData[2];
+
+ /* Spinlocks */
+ spinlock_t Lock;
+
+ spinlock_t TCBSendQLock;
+ spinlock_t TCBReadyQLock;
+ spinlock_t SendHWLock;
+ spinlock_t SendWaitLock;
+
+ spinlock_t RcvLock;
+ spinlock_t RcvPendLock;
+ spinlock_t FbrLock;
+
+ spinlock_t PHYLock;
+
+ /* Packet Filter and look ahead size */
+ u32 PacketFilter;
+ u32 ulLookAhead;
+ u32 uiLinkSpeed;
+ u32 uiDuplexMode;
+ u32 uiAutoNegStatus;
+ u8 ucLinkStatus;
+
+ /* multicast list */
+ u32 MCAddressCount;
+ u8 MCList[NIC_MAX_MCAST_LIST][ETH_ALEN];
+
+ /* MAC test */
+ TXMAC_TXTEST_t TxMacTest;
+
+ /* Pointer to the device's PCI register space */
+ ADDRESS_MAP_t __iomem *CSRAddress;
+
+ /* PCI config space info, for debug purposes only. */
+ u8 RevisionID;
+ u16 VendorID;
+ u16 DeviceID;
+ u16 SubVendorID;
+ u16 SubSystemID;
+ u32 CacheFillSize;
+ u16 PciXDevCtl;
+ u8 pci_lat_timer;
+ u8 pci_hdr_type;
+ u8 pci_bist;
+ u32 pci_cfg_state[64 / sizeof(u32)];
+
+ /* Registry parameters */
+ u8 SpeedDuplex; // speed/duplex
+ eFLOW_CONTROL_t RegistryFlowControl; // for 802.3x flow control
+ u8 RegistryWOLMatch; // Enable WOL pattern-matching
+ u8 RegistryWOLLink; // Link state change is independant
+ u8 RegistryPhyComa; // Phy Coma mode enable/disable
+
+ u32 RegistryRxMemEnd; // Size of internal rx memory
+ u8 RegistryMACStat; // If set, read MACSTAT, else don't
+ u32 RegistryVlanTag; // 802.1q Vlan TAG
+ u32 RegistryJumboPacket; // Max supported ethernet packet size
+
+ u32 RegistryTxNumBuffers;
+ u32 RegistryTxTimeInterval;
+
+ u32 RegistryRxNumBuffers;
+ u32 RegistryRxTimeInterval;
+
+ /* Validation helpers */
+ u8 RegistryPMWOL;
+ u8 RegistryNMIDisable;
+ u32 RegistryDMACache;
+ u32 RegistrySCGain;
+ u8 RegistryPhyLoopbk; // Enable Phy loopback
+
+ /* Derived from the registry: */
+ u8 AiForceDpx; // duplex setting
+ u16 AiForceSpeed; // 'Speed', user over-ride of line speed
+ eFLOW_CONTROL_t FlowControl; // flow control validated by the far-end
+ enum {
+ NETIF_STATUS_INVALID = 0,
+ NETIF_STATUS_MEDIA_CONNECT,
+ NETIF_STATUS_MEDIA_DISCONNECT,
+ NETIF_STATUS_MAX
+ } MediaState;
+ u8 DriverNoPhyAccess;
+
+ /* Minimize init-time */
+ bool bQueryPending;
+ bool bSetPending;
+ bool bResetPending;
+ struct timer_list ErrorTimer;
+ bool bLinkTimerActive;
+ MP_POWER_MGMT PoMgmt;
+ INTERRUPT_t CachedMaskValue;
+
+ atomic_t RcvRefCount; // Num packets not yet returned
+
+ /* Xcvr status at last poll */
+ MI_BMSR_t Bmsr;
+
+ /* Tx Memory Variables */
+ TX_RING_t TxRing;
+
+ /* Rx Memory Variables */
+ RX_RING_t RxRing;
+
+ /* ET1310 register Access */
+ JAGCORE_ACCESS_REGS JagCoreRegs;
+ PCI_CFG_SPACE_REGS PciCfgRegs;
+
+ /* Loopback specifics */
+ u8 ReplicaPhyLoopbk; // Replica Enable
+ u8 ReplicaPhyLoopbkPF; // Replica Enable Pass/Fail
+
+ /* Stats */
+ CE_STATS_t Stats;
+
+ struct net_device_stats net_stats;
+ struct net_device_stats net_stats_prev;
+};
+
+#define MPSendPacketsHandler MPSendPackets
+#define MP_FREE_SEND_PACKET_FUN(Adapter, pMpTcb) \
+ et131x_free_send_packet(Adapter, pMpTcb)
+#define MpSendPacketFun(Adapter, Packet) MpSendPacket(Adapter, Packet)
+
+#endif /* __ET131X_ADAPTER_H__ */
diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c
new file mode 100644
index 0000000..0adbaa6
--- /dev/null
+++ b/drivers/staging/et131x/et131x_config.c
@@ -0,0 +1,325 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_config.c - Handles parsing of configuration data during
+ * initialization.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_initpci.h"
+#include "et131x_config.h"
+
+#include "et1310_tx.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Defines for Parameter Default/Min/Max vaules */
+#define PARM_SPEED_DUPLEX_DEF 0
+#define PARM_SPEED_DUPLEX_MIN 0
+#define PARM_SPEED_DUPLEX_MAX 5
+
+#define PARM_VLAN_TAG_DEF 0
+#define PARM_VLAN_TAG_MIN 0
+#define PARM_VLAN_TAG_MAX 4095
+
+#define PARM_FLOW_CTL_DEF 0
+#define PARM_FLOW_CTL_MIN 0
+#define PARM_FLOW_CTL_MAX 3
+
+#define PARM_WOL_LINK_DEF 3
+#define PARM_WOL_LINK_MIN 0
+#define PARM_WOL_LINK_MAX 3
+
+#define PARM_WOL_MATCH_DEF 7
+#define PARM_WOL_MATCH_MIN 0
+#define PARM_WOL_MATCH_MAX 7
+
+#define PARM_JUMBO_PKT_DEF 1514
+#define PARM_JUMBO_PKT_MIN 1514
+#define PARM_JUMBO_PKT_MAX 9216
+
+#define PARM_PHY_COMA_DEF 0
+#define PARM_PHY_COMA_MIN 0
+#define PARM_PHY_COMA_MAX 1
+
+#define PARM_RX_NUM_BUFS_DEF 4
+#define PARM_RX_NUM_BUFS_MIN 1
+#define PARM_RX_NUM_BUFS_MAX 64
+
+#define PARM_RX_TIME_INT_DEF 10
+#define PARM_RX_TIME_INT_MIN 2
+#define PARM_RX_TIME_INT_MAX 320
+
+#define PARM_TX_NUM_BUFS_DEF 4
+#define PARM_TX_NUM_BUFS_MIN 1
+#define PARM_TX_NUM_BUFS_MAX 40
+
+#define PARM_TX_TIME_INT_DEF 40
+#define PARM_TX_TIME_INT_MIN 1
+#define PARM_TX_TIME_INT_MAX 140
+
+#define PARM_RX_MEM_END_DEF 0x2bc
+#define PARM_RX_MEM_END_MIN 0
+#define PARM_RX_MEM_END_MAX 0x3ff
+
+#define PARM_MAC_STAT_DEF 1
+#define PARM_MAC_STAT_MIN 0
+#define PARM_MAC_STAT_MAX 1
+
+#define PARM_SC_GAIN_DEF 7
+#define PARM_SC_GAIN_MIN 0
+#define PARM_SC_GAIN_MAX 7
+
+#define PARM_PM_WOL_DEF 0
+#define PARM_PM_WOL_MIN 0
+#define PARM_PM_WOL_MAX 1
+
+#define PARM_NMI_DISABLE_DEF 0
+#define PARM_NMI_DISABLE_MIN 0
+#define PARM_NMI_DISABLE_MAX 2
+
+#define PARM_DMA_CACHE_DEF 0
+#define PARM_DMA_CACHE_MIN 0
+#define PARM_DMA_CACHE_MAX 15
+
+#define PARM_PHY_LOOPBK_DEF 0
+#define PARM_PHY_LOOPBK_MIN 0
+#define PARM_PHY_LOOPBK_MAX 1
+
+#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }
+
+/* Module parameter for disabling NMI
+ * et131x_speed_set :
+ * Set Link speed and dublex manually (0-5) [0]
+ * 1 : 10Mb Half-Duplex
+ * 2 : 10Mb Full-Duplex
+ * 3 : 100Mb Half-Duplex
+ * 4 : 100Mb Full-Duplex
+ * 5 : 1000Mb Full-Duplex
+ * 0 : Auto Speed Auto Dublex // default
+ */
+static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF;
+module_param(et131x_nmi_disable, uint, 0);
+MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]");
+
+/* Module parameter for manual speed setting
+ * et131x_nmi_disable :
+ * Disable NMI (0-2) [0]
+ * 0 :
+ * 1 :
+ * 2 :
+ */
+static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
+module_param(et131x_speed_set, uint, 0);
+MODULE_PARM_DESC(et131x_speed_set,
+ "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex");
+
+/**
+ * et131x_config_parse
+ * @pAdapter: pointer to the private adapter struct
+ *
+ * Parses a configuration from some location (module parameters, for example)
+ * into the private adapter struct
+ */
+void et131x_config_parse(struct et131x_adapter *pAdapter)
+{
+ uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /*
+ * The NDIS driver uses the registry to store persistent per-device
+ * configuration, and reads this configuration into the appropriate
+ * elements of the private adapter structure on initialization.
+ * Because Linux has no analog to the registry, use this function to
+ * initialize the private adapter structure with a default
+ * configuration.
+ *
+ * One other possibility is to use a series of module parameters which
+ * can be passed in by the caller when the module is initialized.
+ * However, this implementation does not allow for seperate
+ * configurations in the event multiple devices are present, and hence
+ * will not suffice.
+ *
+ * If another method is derived which addresses this problem, this is
+ * where it should be implemented.
+ */
+
+ /* Set the private adapter struct with default values for the
+ * corresponding parameters
+ */
+ if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) {
+ DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n",
+ et131x_speed_set);
+ pAdapter->SpeedDuplex = et131x_speed_set;
+ } else {
+ pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF;
+ }
+
+ // pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF;
+
+ pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF;
+ pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF;
+ pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF;
+ pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF;
+ pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF;
+ pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF;
+ pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF;
+ pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF;
+ pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF;
+ pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF;
+ pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF;
+ pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF;
+ pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF;
+ pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF;
+
+ if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) {
+ pAdapter->RegistryNMIDisable = et131x_nmi_disable;
+ } else {
+ pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF;
+ }
+
+ pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF;
+ pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF;
+
+ /* Set the MAC address to a default */
+ memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN);
+ pAdapter->bOverrideAddress = false;
+
+ DBG_TRACE(et131x_dbginfo,
+ "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n",
+ pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1],
+ pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3],
+ pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]);
+
+ /* Decode SpeedDuplex
+ *
+ * Set up as if we are auto negotiating always and then change if we
+ * go into force mode
+ */
+ pAdapter->AiForceSpeed = 0; // Auto speed
+ pAdapter->AiForceDpx = 0; // Auto FDX
+
+ /* If we are the 10/100 device, and gigabit is somehow requested then
+ * knock it down to 100 full.
+ */
+ if ((pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST) &&
+ (pAdapter->SpeedDuplex == 5)) {
+ pAdapter->SpeedDuplex = 4;
+ }
+
+ switch (pAdapter->SpeedDuplex) {
+ case 1: // 10Mb Half-Duplex
+ pAdapter->AiForceSpeed = 10;
+ pAdapter->AiForceDpx = 1;
+ break;
+
+ case 2: // 10Mb Full-Duplex
+ pAdapter->AiForceSpeed = 10;
+ pAdapter->AiForceDpx = 2;
+ break;
+
+ case 3: // 100Mb Half-Duplex
+ pAdapter->AiForceSpeed = 100;
+ pAdapter->AiForceDpx = 1;
+ break;
+
+ case 4: // 100Mb Full-Duplex
+ pAdapter->AiForceSpeed = 100;
+ pAdapter->AiForceDpx = 2;
+ break;
+
+ case 5: // 1000Mb Full-Duplex
+ pAdapter->AiForceSpeed = 1000;
+ pAdapter->AiForceDpx = 2;
+ break;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
diff --git a/drivers/staging/et131x/et131x_config.h b/drivers/staging/et131x/et131x_config.h
new file mode 100644
index 0000000..642c0f6
--- /dev/null
+++ b/drivers/staging/et131x/et131x_config.h
@@ -0,0 +1,67 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_config.h - Defines, structs, enums, prototypes, etc. to support
+ * et131x_config.c
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_CONFIG_H__
+#define __ET131X_CONFIG_H__
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void et131x_config_parse(struct et131x_adapter *adapter);
+
+#endif /* __ET131X_CONFIG_H__ */
diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c
new file mode 100644
index 0000000..9ee5bce
--- /dev/null
+++ b/drivers/staging/et131x/et131x_debug.c
@@ -0,0 +1,218 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_debug.c - Routines used for debugging.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifdef CONFIG_ET131X_DEBUG
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_config.h"
+#include "et131x_isr.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+
+/* Data for debugging facilities */
+extern dbg_info_t *et131x_dbginfo;
+
+/**
+ * DumpTxQueueContents - Dump out the tx queue and the shadow pointers
+ * @pAdapter: pointer to our adapter structure
+ */
+void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter)
+{
+ MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc;
+ uint32_t TxQueueAddr;
+
+ if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+ for (TxQueueAddr = 0x200; TxQueueAddr < 0x3ff; TxQueueAddr++) {
+ MMC_SRAM_ACCESS_t sram_access;
+
+ sram_access.value = readl(&mmc->sram_access.value);
+ sram_access.bits.req_addr = TxQueueAddr;
+ sram_access.bits.req_access = 1;
+ writel(sram_access.value, &mmc->sram_access.value);
+
+ DBG_PRINT("Addr 0x%x, Access 0x%08x\t"
+ "Value 1 0x%08x, Value 2 0x%08x, "
+ "Value 3 0x%08x, Value 4 0x%08x, \n",
+ TxQueueAddr,
+ readl(&mmc->sram_access.value),
+ readl(&mmc->sram_word1),
+ readl(&mmc->sram_word2),
+ readl(&mmc->sram_word3),
+ readl(&mmc->sram_word4));
+ }
+
+ DBG_PRINT("Shadow Pointers 0x%08x\n",
+ readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value));
+ }
+}
+
+/**
+ * DumpDeviceBlock
+ * @pAdapter: pointer to our adapter
+ *
+ * Dumps the first 64 regs of each block of the et-1310 (each block is
+ * mapped to a new page, each page is 4096 bytes).
+ */
+#define NUM_BLOCKS 8
+void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter,
+ uint32_t Block)
+{
+ uint32_t Address1, Address2;
+ uint32_t __iomem *BigDevicePointer =
+ (uint32_t __iomem *) pAdapter->CSRAddress;
+ const char *BlockNames[NUM_BLOCKS] = {
+ "Global", "Tx DMA", "Rx DMA", "Tx MAC",
+ "Rx MAC", "MAC", "MAC Stat", "MMC"
+ };
+
+ /* Output the debug counters to the debug terminal */
+ if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+ DBG_PRINT("%s block\n", BlockNames[Block]);
+ BigDevicePointer += Block * 1024;
+ for (Address1 = 0; Address1 < 8; Address1++) {
+ for (Address2 = 0; Address2 < 8; Address2++) {
+ if (Block == 0 &&
+ (Address1 * 8 + Address2) == 6) {
+ DBG_PRINT(" ISR , ");
+ } else {
+ DBG_PRINT("0x%08x, ",
+ readl(BigDevicePointer++));
+ }
+ }
+ DBG_PRINT("\n");
+ }
+ DBG_PRINT("\n");
+ }
+}
+
+/**
+ * DumpDeviceReg
+ * @pAdapter: pointer to our adapter
+ *
+ * Dumps the first 64 regs of each block of the et-1310 (each block is
+ * mapped to a new page, each page is 4096 bytes).
+ */
+void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter)
+{
+ uint32_t Address1, Address2;
+ uint32_t Block;
+ uint32_t __iomem *BigDevicePointer =
+ (uint32_t __iomem *) pAdapter->CSRAddress;
+ uint32_t __iomem *Pointer;
+ const char *BlockNames[NUM_BLOCKS] = {
+ "Global", "Tx DMA", "Rx DMA", "Tx MAC",
+ "Rx MAC", "MAC", "MAC Stat", "MMC"
+ };
+
+ /* Output the debug counters to the debug terminal */
+ if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) {
+ for (Block = 0; Block < NUM_BLOCKS; Block++) {
+ DBG_PRINT("%s block\n", BlockNames[Block]);
+ Pointer = BigDevicePointer + (Block * 1024);
+
+ for (Address1 = 0; Address1 < 8; Address1++) {
+ for (Address2 = 0; Address2 < 8; Address2++) {
+ DBG_PRINT("0x%08x, ",
+ readl(Pointer++));
+ }
+ DBG_PRINT("\n");
+ }
+ DBG_PRINT("\n");
+ }
+ }
+}
+
+#endif // CONFIG_ET131X_DEBUG
diff --git a/drivers/staging/et131x/et131x_debug.h b/drivers/staging/et131x/et131x_debug.h
new file mode 100644
index 0000000..dab6080
--- /dev/null
+++ b/drivers/staging/et131x/et131x_debug.h
@@ -0,0 +1,201 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_debug.h - Defines, structs, enums, prototypes, etc. used for
+ * outputting debug messages to the system logging facility
+ * (ksyslogd)
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_DBG_H__
+#define __ET131X_DBG_H__
+
+/* Define Masks for debugging types/levels */
+#define DBG_ERROR_ON 0x00000001L
+#define DBG_WARNING_ON 0x00000002L
+#define DBG_NOTICE_ON 0x00000004L
+#define DBG_TRACE_ON 0x00000008L
+#define DBG_VERBOSE_ON 0x00000010L
+#define DBG_PARAM_ON 0x00000020L
+#define DBG_BREAK_ON 0x00000040L
+#define DBG_RX_ON 0x00000100L
+#define DBG_TX_ON 0x00000200L
+
+#ifdef CONFIG_ET131X_DEBUG
+
+/*
+ * Set the level of debugging if not done with a preprocessor define. See
+ * et131x_main.c, function et131x_init_module() for how the debug level
+ * translates into the types of messages displayed.
+ */
+#ifndef DBG_LVL
+#define DBG_LVL 3
+#endif /* DBG_LVL */
+
+#define DBG_DEFAULTS (DBG_ERROR_ON | DBG_WARNING_ON | DBG_BREAK_ON )
+
+#define DBG_FLAGS(A) (A)->dbgFlags
+#define DBG_NAME(A) (A)->dbgName
+#define DBG_LEVEL(A) (A)->dbgLevel
+
+#ifndef DBG_PRINT
+#define DBG_PRINT(S...) printk(KERN_DEBUG S)
+#endif /* DBG_PRINT */
+
+#ifndef DBG_PRINTC
+#define DBG_PRINTC(S...) printk(S)
+#endif /* DBG_PRINTC */
+
+#ifndef DBG_TRAP
+#define DBG_TRAP {} /* BUG() */
+#endif /* DBG_TRAP */
+
+#define _ENTER_STR ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>"
+#define _LEAVE_STR "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<"
+
+#define _DBG_ENTER(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \
+ ++DBG_LEVEL(A), _ENTER_STR, __func__)
+#define _DBG_LEAVE(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \
+ DBG_LEVEL(A)--, _LEAVE_STR, __func__)
+
+#define DBG_ENTER(A) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+ _DBG_ENTER(A);}
+
+#define DBG_LEAVE(A) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+ _DBG_LEAVE(A);}
+
+#define DBG_PARAM(A,N,F,S...) {if (DBG_FLAGS(A) & DBG_PARAM_ON) \
+ DBG_PRINT(" %s -- "F"\n",N,S);}
+
+#define DBG_ERROR(A,S...) \
+ if (DBG_FLAGS(A) & DBG_ERROR_ON) { \
+ DBG_PRINT("%s:ERROR:%s ",DBG_NAME(A), __func__); \
+ DBG_PRINTC(S); \
+ DBG_TRAP; \
+ }
+
+#define DBG_WARNING(A,S...) {if (DBG_FLAGS(A) & DBG_WARNING_ON) \
+ {DBG_PRINT("%s:WARNING:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}}
+
+#define DBG_NOTICE(A,S...) {if (DBG_FLAGS(A) & DBG_NOTICE_ON) \
+ {DBG_PRINT("%s:NOTICE:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}}
+
+#define DBG_TRACE(A,S...) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \
+ {DBG_PRINT("%s:TRACE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}}
+
+#define DBG_VERBOSE(A,S...) {if (DBG_FLAGS(A) & DBG_VERBOSE_ON) \
+ {DBG_PRINT("%s:VERBOSE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}}
+
+#define DBG_RX(A,S...) {if (DBG_FLAGS(A) & DBG_RX_ON) \
+ {DBG_PRINT(S);}}
+
+#define DBG_RX_ENTER(A) {if (DBG_FLAGS(A) & DBG_RX_ON) \
+ _DBG_ENTER(A);}
+
+#define DBG_RX_LEAVE(A) {if (DBG_FLAGS(A) & DBG_RX_ON) \
+ _DBG_LEAVE(A);}
+
+#define DBG_TX(A,S...) {if (DBG_FLAGS(A) & DBG_TX_ON) \
+ {DBG_PRINT(S);}}
+
+#define DBG_TX_ENTER(A) {if (DBG_FLAGS(A) & DBG_TX_ON) \
+ _DBG_ENTER(A);}
+
+#define DBG_TX_LEAVE(A) {if (DBG_FLAGS(A) & DBG_TX_ON) \
+ _DBG_LEAVE(A);}
+
+#define DBG_ASSERT(C) {if (!(C)) \
+ {DBG_PRINT("ASSERT(%s) -- %s#%d (%s)\n", \
+ #C,__FILE__,__LINE__,__func__); \
+ DBG_TRAP;}}
+#define STATIC
+
+typedef struct {
+ char *dbgName;
+ int dbgLevel;
+ unsigned long dbgFlags;
+} dbg_info_t;
+
+#else /* CONFIG_ET131X_DEBUG */
+
+#define DBG_DEFN
+#define DBG_TRAP
+#define DBG_PRINT(S...)
+#define DBG_ENTER(A)
+#define DBG_LEAVE(A)
+#define DBG_PARAM(A,N,F,S...)
+#define DBG_ERROR(A,S...)
+#define DBG_WARNING(A,S...)
+#define DBG_NOTICE(A,S...)
+#define DBG_TRACE(A,S...)
+#define DBG_VERBOSE(A,S...)
+#define DBG_RX(A,S...)
+#define DBG_RX_ENTER(A)
+#define DBG_RX_LEAVE(A)
+#define DBG_TX(A,S...)
+#define DBG_TX_ENTER(A)
+#define DBG_TX_LEAVE(A)
+#define DBG_ASSERT(C)
+#define STATIC static
+
+#endif /* CONFIG_ET131X_DEBUG */
+
+/* Forward declaration of the private adapter structure */
+struct et131x_adapter;
+
+void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *adapter);
+void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *adapter,
+ unsigned int Block);
+void DumpDeviceReg(int dbgLvl, struct et131x_adapter *adapter);
+
+#endif /* __ET131X_DBG_H__ */
diff --git a/drivers/staging/et131x/et131x_defs.h b/drivers/staging/et131x/et131x_defs.h
new file mode 100644
index 0000000..886cb78
--- /dev/null
+++ b/drivers/staging/et131x/et131x_defs.h
@@ -0,0 +1,128 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_defs.h - Defines, structs, enums, prototypes, etc. to assist with OS
+ * compatibility
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_DEFS_H__
+#define __ET131X_DEFS_H__
+
+/* Packet and header sizes */
+#define NIC_MIN_PACKET_SIZE 60
+#define NIC_HEADER_SIZE ETH_HLEN /* 14 */
+
+/* Multicast list size */
+#define NIC_MAX_MCAST_LIST 128
+
+/* Supported Filters */
+#define ET131X_PACKET_TYPE_DIRECTED 0x0001
+#define ET131X_PACKET_TYPE_MULTICAST 0x0002
+#define ET131X_PACKET_TYPE_BROADCAST 0x0004
+#define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008
+#define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010
+
+/* Tx Timeout */
+#define ET131X_TX_TIMEOUT (1 * HZ)
+#define NIC_SEND_HANG_THRESHOLD 0
+
+/* MP_TCB flags */
+#define fMP_DEST_MULTI 0x00000001
+#define fMP_DEST_BROAD 0x00000002
+
+/* MP_ADAPTER flags */
+#define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
+#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
+#define fMP_ADAPTER_SECONDARY 0x00000010
+
+/* MP_SHARED flags */
+#define fMP_ADAPTER_SHUTDOWN 0x00100000
+#define fMP_ADAPTER_LOWER_POWER 0x00200000
+
+#define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
+#define fMP_ADAPTER_RESET_IN_PROGRESS 0x01000000
+#define fMP_ADAPTER_NO_CABLE 0x02000000
+#define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
+#define fMP_ADAPTER_REMOVE_IN_PROGRESS 0x08000000
+#define fMP_ADAPTER_HALT_IN_PROGRESS 0x10000000
+#define fMP_ADAPTER_LINK_DETECTION 0x20000000
+
+#define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
+#define fMP_ADAPTER_NOT_READY_MASK 0x3ff00000
+
+/* Some offsets in PCI config space that are actually used. */
+#define ET1310_PCI_PM_CAPABILITY 0x40
+#define ET1310_PCI_PM_CSR 0x44
+#define ET1310_PCI_MAX_PYLD 0x4C
+#define ET1310_PCI_DEV_CTRL 0x50
+#define ET1310_PCI_DEV_STAT 0x52
+#define ET1310_NMI_DISABLE 0x61
+#define ET1310_PCI_MAC_ADDRESS 0xA4
+#define ET1310_PCI_EEPROM_STATUS 0xB2
+#define ET1310_PCI_PHY_INDEX_REG 0xB4
+#define ET1310_PCI_ACK_NACK 0xC0
+#define ET1310_PCI_REPLAY 0xC2
+#define ET1310_PCI_L0L1LATENCY 0xCF
+#define ET1310_PCI_SEL_PHY_CTRL 0xE4
+#define ET1310_PCI_ADVANCED_ERR 0x100
+
+/* PCI Vendor/Product IDs */
+#define ET131X_PCI_VENDOR_ID 0x11C1 // Agere Systems
+#define ET131X_PCI_DEVICE_ID_GIG 0xED00 // ET1310 1000 Base-T
+#define ET131X_PCI_DEVICE_ID_FAST 0xED01 // ET1310 100 Base-T
+
+/* Define order of magnitude converter */
+#define NANO_IN_A_MICRO 1000
+
+#endif /* __ET131X_DEFS_H__ */
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
new file mode 100644
index 0000000..4c6f171
--- /dev/null
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -0,0 +1,1046 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_initpci.c - Routines and data used to register the driver with the
+ * PCI (and PCI Express) subsystem, as well as basic driver
+ * init and startup.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/random.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+
+#include "et131x_adapter.h"
+#include "et131x_netdev.h"
+#include "et131x_config.h"
+#include "et131x_isr.h"
+
+#include "et1310_address_map.h"
+#include "et1310_jagcore.h"
+#include "et1310_tx.h"
+#include "et1310_rx.h"
+#include "et1310_mac.h"
+#include "et1310_eeprom.h"
+
+
+int __devinit et131x_pci_setup(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+void __devexit et131x_pci_remove(struct pci_dev *pdev);
+
+
+/* Modinfo parameters (filled out using defines from et131x_version.h) */
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+/* Module Parameters and related data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+static u32 et131x_debug_level = DBG_LVL;
+static u32 et131x_debug_flags = DBG_DEFAULTS;
+
+/*
+et131x_debug_level :
+ Level of debugging desired (0-7)
+ 7 : DBG_RX_ON | DBG_TX_ON
+ 6 : DBG_PARAM_ON
+ 5 : DBG_VERBOSE_ON
+ 4 : DBG_TRACE_ON
+ 3 : DBG_NOTICE_ON
+ 2 : no debug info
+ 1 : no debug info
+ 0 : no debug info
+*/
+
+module_param(et131x_debug_level, uint, 0);
+module_param(et131x_debug_flags, uint, 0);
+
+MODULE_PARM_DESC(et131x_debug_level, "Level of debugging desired (0-7)");
+
+static dbg_info_t et131x_info = { DRIVER_NAME_EXT, 0, 0 };
+dbg_info_t *et131x_dbginfo = &et131x_info;
+#endif /* CONFIG_ET131X_DEBUG */
+
+static struct pci_device_id et131x_pci_table[] __devinitdata = {
+ {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0UL},
+ {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_FAST, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0UL},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, et131x_pci_table);
+
+static struct pci_driver et131x_driver = {
+ .name = DRIVER_NAME,
+ .id_table = et131x_pci_table,
+ .probe = et131x_pci_setup,
+ .remove = __devexit_p(et131x_pci_remove),
+ .suspend = NULL, //et131x_pci_suspend,
+ .resume = NULL, //et131x_pci_resume,
+};
+
+
+/**
+ * et131x_init_module - The "main" entry point called on driver initialization
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_init_module(void)
+{
+ int result;
+
+#ifdef CONFIG_ET131X_DEBUG
+ /* Set the level of debug messages displayed using the module
+ * parameter
+ */
+ et131x_dbginfo->dbgFlags = et131x_debug_flags;
+
+ switch (et131x_debug_level) {
+ case 7:
+ et131x_dbginfo->dbgFlags |= (DBG_RX_ON | DBG_TX_ON);
+
+ case 6:
+ et131x_dbginfo->dbgFlags |= DBG_PARAM_ON;
+
+ case 5:
+ et131x_dbginfo->dbgFlags |= DBG_VERBOSE_ON;
+
+ case 4:
+ et131x_dbginfo->dbgFlags |= DBG_TRACE_ON;
+
+ case 3:
+ et131x_dbginfo->dbgFlags |= DBG_NOTICE_ON;
+
+ case 2:
+ case 1:
+ case 0:
+ default:
+ break;
+ }
+#endif /* CONFIG_ET131X_DEBUG */
+
+ DBG_ENTER(et131x_dbginfo);
+ DBG_PRINT("%s\n", DRIVER_INFO);
+
+ result = pci_register_driver(&et131x_driver);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+}
+
+/**
+ * et131x_cleanup_module - The entry point called on driver cleanup
+ */
+void et131x_cleanup_module(void)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ pci_unregister_driver(&et131x_driver);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/*
+ * These macros map the driver-specific init_module() and cleanup_module()
+ * routines so they can be called by the kernel.
+ */
+module_init(et131x_init_module);
+module_exit(et131x_cleanup_module);
+
+
+/**
+ * et131x_find_adapter - Find the adapter and get all the assigned resources
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
+{
+ int result;
+ uint8_t eepromStat;
+ uint8_t maxPayload = 0;
+ uint8_t read_size_reg;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Allow disabling of Non-Maskable Interrupts in I/O space, to
+ * support validation.
+ */
+ if (adapter->RegistryNMIDisable) {
+ uint8_t RegisterVal;
+
+ RegisterVal = inb(ET1310_NMI_DISABLE);
+ RegisterVal &= 0xf3;
+
+ if (adapter->RegistryNMIDisable == 2) {
+ RegisterVal |= 0xc;
+ }
+
+ outb(ET1310_NMI_DISABLE, RegisterVal);
+ }
+
+ /* We first need to check the EEPROM Status code located at offset
+ * 0xB2 of config space
+ */
+ result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
+ &eepromStat);
+
+ /* THIS IS A WORKAROUND:
+ * I need to call this function twice to get my card in a
+ * LG M1 Express Dual running. I tried also a msleep before this
+ * function, because I thougth there could be some time condidions
+ * but it didn't work. Call the whole function twice also work.
+ */
+ result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
+ &eepromStat);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for "
+ "EEPROM Status\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* Determine if the error(s) we care about are present. If they are
+ * present, we need to fail.
+ */
+ if (eepromStat & 0x4C) {
+ result = pci_read_config_byte(pdev, PCI_REVISION_ID,
+ &adapter->RevisionID);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not read PCI config space for "
+ "Revision ID\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ } else if (adapter->RevisionID == 0x01) {
+ int32_t nLoop;
+ uint8_t ucTemp[4] = { 0xFE, 0x13, 0x10, 0xFF };
+
+ /* Re-write the first 4 bytes if we have an eeprom
+ * present and the revision id is 1, this fixes the
+ * corruption seen with 1310 B Silicon
+ */
+ for (nLoop = 0; nLoop < 3; nLoop++) {
+ EepromWriteByte(adapter, nLoop, ucTemp[nLoop],
+ 0, SINGLE_BYTE);
+ }
+ }
+
+ DBG_ERROR(et131x_dbginfo,
+ "Fatal EEPROM Status Error - 0x%04x\n", eepromStat);
+
+ /* This error could mean that there was an error reading the
+ * eeprom or that the eeprom doesn't exist. We will treat
+ * each case the same and not try to gather additional
+ * information that normally would come from the eeprom, like
+ * MAC Address
+ */
+ adapter->bEepromPresent = false;
+
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ } else {
+ DBG_TRACE(et131x_dbginfo, "EEPROM Status Code - 0x%04x\n",
+ eepromStat);
+ adapter->bEepromPresent = true;
+ }
+
+ /* Read the EEPROM for information regarding LED behavior. Refer to
+ * ET1310_phy.c, et131x_xcvr_init(), for its use.
+ */
+ EepromReadByte(adapter, 0x70, &adapter->eepromData[0], 0, SINGLE_BYTE);
+ EepromReadByte(adapter, 0x71, &adapter->eepromData[1], 0, SINGLE_BYTE);
+
+ if (adapter->eepromData[0] != 0xcd) {
+ adapter->eepromData[1] = 0x00; // Disable all optional features
+ }
+
+ /* Let's set up the PORT LOGIC Register. First we need to know what
+ * the max_payload_size is
+ */
+ result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for "
+ "Max Payload Size\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* Program the Ack/Nak latency and replay timers */
+ maxPayload &= 0x07; // Only the lower 3 bits are valid
+
+ if (maxPayload < 2) {
+ const uint16_t AckNak[2] = { 0x76, 0xD0 };
+ const uint16_t Replay[2] = { 0x1E0, 0x2ED };
+
+ result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
+ AckNak[maxPayload]);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not write PCI config space "
+ "for ACK/NAK\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ result = pci_write_config_word(pdev, ET1310_PCI_REPLAY,
+ Replay[maxPayload]);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not write PCI config space "
+ "for Replay Timer\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+ }
+
+ /* l0s and l1 latency timers. We are using default values.
+ * Representing 001 for L0s and 010 for L1
+ */
+ result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not write PCI config space for "
+ "Latency Timers\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* Change the max read size to 2k */
+ result = pci_read_config_byte(pdev, 0x51, &read_size_reg);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not read PCI config space for Max read size\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ read_size_reg &= 0x8f;
+ read_size_reg |= 0x40;
+
+ result = pci_write_config_byte(pdev, 0x51, read_size_reg);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not write PCI config space for Max read size\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* PCI Express Configuration registers 0x48-0x5B (Device Control) */
+ result = pci_read_config_word(pdev, ET1310_PCI_DEV_CTRL,
+ &adapter->PciXDevCtl);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not read PCI config space for PCI Express Dev Ctl\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+
+ /* Get MAC address from config space if an eeprom exists, otherwise
+ * the MAC address there will not be valid
+ */
+ if (adapter->bEepromPresent) {
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ result = pci_read_config_byte(
+ pdev, ET1310_PCI_MAC_ADDRESS + i,
+ adapter->PermanentAddress + i);
+ if (result != PCIBIOS_SUCCESSFUL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not read PCI config space for MAC address\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return -EIO;
+ }
+ }
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/**
+ * et131x_error_timer_handler
+ * @data: timer-specific variable; here a pointer to our adapter structure
+ *
+ * The routine called when the error timer expires, to track the number of
+ * recurring errors.
+ */
+void et131x_error_timer_handler(unsigned long data)
+{
+ struct et131x_adapter *pAdapter = (struct et131x_adapter *) data;
+ PM_CSR_t pm_csr;
+
+ pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value);
+
+ if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ if (pAdapter->RegistryMACStat) {
+ UpdateMacStatHostCounters(pAdapter);
+ }
+ } else {
+ DBG_VERBOSE(et131x_dbginfo,
+ "No interrupts, in PHY coma, pm_csr = 0x%x\n",
+ pm_csr.value);
+ }
+
+ if (!pAdapter->Bmsr.bits.link_status &&
+ pAdapter->RegistryPhyComa &&
+ pAdapter->PoMgmt.TransPhyComaModeOnBoot < 11) {
+ pAdapter->PoMgmt.TransPhyComaModeOnBoot++;
+ }
+
+ if (pAdapter->PoMgmt.TransPhyComaModeOnBoot == 10) {
+ if (!pAdapter->Bmsr.bits.link_status
+ && pAdapter->RegistryPhyComa) {
+ if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ // NOTE - This was originally a 'sync with interrupt'. How
+ // to do that under Linux?
+ et131x_enable_interrupts(pAdapter);
+ EnablePhyComa(pAdapter);
+ }
+ }
+ }
+
+ /* This is a periodic timer, so reschedule */
+ mod_timer(&pAdapter->ErrorTimer, jiffies +
+ TX_ERROR_PERIOD * HZ / 1000);
+}
+
+/**
+ * et131x_link_detection_handler
+ *
+ * Timer function for link up at driver load time
+ */
+void et131x_link_detection_handler(unsigned long data)
+{
+ struct et131x_adapter *pAdapter = (struct et131x_adapter *) data;
+ unsigned long lockflags;
+
+ /* Let everyone know that we have run */
+ pAdapter->bLinkTimerActive = false;
+
+ if (pAdapter->MediaState == 0) {
+ spin_lock_irqsave(&pAdapter->Lock, lockflags);
+
+ pAdapter->MediaState = NETIF_STATUS_MEDIA_DISCONNECT;
+ MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION);
+
+ spin_unlock_irqrestore(&pAdapter->Lock, lockflags);
+
+ netif_carrier_off(pAdapter->netdev);
+
+ pAdapter->bSetPending = false;
+ }
+}
+
+/**
+ * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_adapter_setup(struct et131x_adapter *pAdapter)
+{
+ int status = 0;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Configure the JAGCore */
+ ConfigGlobalRegs(pAdapter);
+
+ ConfigMACRegs1(pAdapter);
+ ConfigMMCRegs(pAdapter);
+
+ ConfigRxMacRegs(pAdapter);
+ ConfigTxMacRegs(pAdapter);
+
+ ConfigRxDmaRegs(pAdapter);
+ ConfigTxDmaRegs(pAdapter);
+
+ ConfigMacStatRegs(pAdapter);
+
+ /* Move the following code to Timer function?? */
+ status = et131x_xcvr_find(pAdapter);
+
+ if (status != 0) {
+ DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n");
+ }
+
+ /* Prepare the TRUEPHY library. */
+ ET1310_PhyInit(pAdapter);
+
+ /* Reset the phy now so changes take place */
+ ET1310_PhyReset(pAdapter);
+
+ /* Power down PHY */
+ ET1310_PhyPowerDown(pAdapter, 1);
+
+ /*
+ * We need to turn off 1000 base half dulplex, the mac does not
+ * support it. For the 10/100 part, turn off all gig advertisement
+ */
+ if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) {
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL);
+ } else {
+ ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE);
+ }
+
+ /* Power up PHY */
+ ET1310_PhyPowerDown(pAdapter, 0);
+
+ et131x_setphy_normal(pAdapter);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_setup_hardware_properties - set up the MAC Address on the ET1310
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_setup_hardware_properties(struct et131x_adapter *adapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* If have our default mac from registry and no mac address from
+ * EEPROM then we need to generate the last octet and set it on the
+ * device
+ */
+ if (!adapter->bOverrideAddress) {
+ if (adapter->PermanentAddress[0] == 0x00 &&
+ adapter->PermanentAddress[1] == 0x00 &&
+ adapter->PermanentAddress[2] == 0x00 &&
+ adapter->PermanentAddress[3] == 0x00 &&
+ adapter->PermanentAddress[4] == 0x00 &&
+ adapter->PermanentAddress[5] == 0x00) {
+ /*
+ * We need to randomly generate the last octet so we
+ * decrease our chances of setting the mac address to
+ * same as another one of our cards in the system
+ */
+ get_random_bytes(&adapter->CurrentAddress[5], 1);
+
+ /*
+ * We have the default value in the register we are
+ * working with so we need to copy the current
+ * address into the permanent address
+ */
+ memcpy(adapter->PermanentAddress,
+ adapter->CurrentAddress, ETH_ALEN);
+ } else {
+ /* We do not have an override address, so set the
+ * current address to the permanent address and add
+ * it to the device
+ */
+ memcpy(adapter->CurrentAddress,
+ adapter->PermanentAddress, ETH_ALEN);
+ }
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_soft_reset(struct et131x_adapter *adapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Disable MAC Core */
+ writel(0xc00f0000, &adapter->CSRAddress->mac.cfg1.value);
+
+ /* Set everything to a reset value */
+ writel(0x7F, &adapter->CSRAddress->global.sw_reset.value);
+ writel(0x000f0000, &adapter->CSRAddress->mac.cfg1.value);
+ writel(0x00000000, &adapter->CSRAddress->mac.cfg1.value);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_align_allocated_memory - Align allocated memory on a given boundary
+ * @adapter: pointer to our adapter structure
+ * @phys_addr: pointer to Physical address
+ * @offset: pointer to the offset variable
+ * @mask: correct mask
+ */
+void et131x_align_allocated_memory(struct et131x_adapter *adapter,
+ uint64_t *phys_addr,
+ uint64_t *offset, uint64_t mask)
+{
+ uint64_t new_addr;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ *offset = 0;
+
+ new_addr = *phys_addr & ~mask;
+
+ if (new_addr != *phys_addr) {
+ /* Move to next aligned block */
+ new_addr += mask + 1;
+ /* Return offset for adjusting virt addr */
+ *offset = new_addr - *phys_addr;
+ /* Return new physical address */
+ *phys_addr = new_addr;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_adapter_memory_alloc
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h).
+ *
+ * Allocate all the memory blocks for send, receive and others.
+ */
+int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
+{
+ int status = 0;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ do {
+ /* Allocate memory for the Tx Ring */
+ status = et131x_tx_dma_memory_alloc(adapter);
+ if (status != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "et131x_tx_dma_memory_alloc FAILED\n");
+ break;
+ }
+
+ /* Receive buffer memory allocation */
+ status = et131x_rx_dma_memory_alloc(adapter);
+ if (status != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "et131x_rx_dma_memory_alloc FAILED\n");
+ et131x_tx_dma_memory_free(adapter);
+ break;
+ }
+
+ /* Init receive data structures */
+ status = et131x_init_recv(adapter);
+ if (status != 0) {
+ DBG_ERROR(et131x_dbginfo, "et131x_init_recv FAILED\n");
+ et131x_tx_dma_memory_free(adapter);
+ et131x_rx_dma_memory_free(adapter);
+ break;
+ }
+ } while (0);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
+ * @adapter: pointer to our private adapter structure
+ */
+void et131x_adapter_memory_free(struct et131x_adapter *adapter)
+{
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Free DMA memory */
+ et131x_tx_dma_memory_free(adapter);
+ et131x_rx_dma_memory_free(adapter);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_pci_remove
+ * @pdev: a pointer to the device's pci_dev structure
+ *
+ * Registered in the pci_driver structure, this function is called when the
+ * PCI subsystem detects that a PCI device which matches the information
+ * contained in the pci_device_id table has been removed.
+ */
+void __devexit et131x_pci_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev;
+ struct et131x_adapter *adapter;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Retrieve the net_device pointer from the pci_dev struct, as well
+ * as the private adapter struct
+ */
+ netdev = (struct net_device *) pci_get_drvdata(pdev);
+ adapter = netdev_priv(netdev);
+
+ /* Perform device cleanup */
+ unregister_netdev(netdev);
+ et131x_adapter_memory_free(adapter);
+ iounmap(adapter->CSRAddress);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_pci_setup - Perform device initialization
+ * @pdev: a pointer to the device's pci_dev structure
+ * @ent: this device's entry in the pci_device_id table
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ *
+ * Registered in the pci_driver structure, this function is called when the
+ * PCI subsystem finds a new PCI device which matches the information
+ * contained in the pci_device_id table. This routine is the equivalent to
+ * a device insertion routine.
+ */
+int __devinit et131x_pci_setup(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int result = 0;
+ int pm_cap;
+ bool pci_using_dac;
+ struct net_device *netdev = NULL;
+ struct et131x_adapter *adapter = NULL;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Enable the device via the PCI subsystem */
+ result = pci_enable_device(pdev);
+ if (result != 0) {
+ DBG_ERROR(et131x_dbginfo, "pci_enable_device() failed\n");
+ goto out;
+ }
+
+ /* Perform some basic PCI checks */
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ DBG_ERROR(et131x_dbginfo,
+ "Can't find PCI device's base address\n");
+ result = -ENODEV;
+ goto out;
+ }
+
+ result = pci_request_regions(pdev, DRIVER_NAME);
+ if (result != 0) {
+ DBG_ERROR(et131x_dbginfo, "Can't get PCI resources\n");
+ goto err_disable;
+ }
+
+ /* Enable PCI bus mastering */
+ DBG_TRACE(et131x_dbginfo, "Setting PCI Bus Mastering...\n");
+ pci_set_master(pdev);
+
+ /* Query PCI for Power Mgmt Capabilities
+ *
+ * NOTE: Now reading PowerMgmt in another location; is this still
+ * needed?
+ */
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm_cap == 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "Cannot find Power Management capabilities\n");
+ result = -EIO;
+ goto err_release_res;
+ }
+
+ /* Check the DMA addressing support of this device */
+ if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ DBG_TRACE(et131x_dbginfo, "64-bit DMA addressing supported\n");
+ pci_using_dac = true;
+
+ result =
+ pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ if (result != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "Unable to obtain 64 bit DMA for consistent allocations\n");
+ goto err_release_res;
+ }
+ } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ DBG_TRACE(et131x_dbginfo,
+ "64-bit DMA addressing NOT supported\n");
+ DBG_TRACE(et131x_dbginfo,
+ "32-bit DMA addressing will be used\n");
+ pci_using_dac = false;
+ } else {
+ DBG_ERROR(et131x_dbginfo, "No usable DMA addressing method\n");
+ result = -EIO;
+ goto err_release_res;
+ }
+
+ /* Allocate netdev and private adapter structs */
+ DBG_TRACE(et131x_dbginfo,
+ "Allocate netdev and private adapter structs...\n");
+ netdev = et131x_device_alloc();
+ if (netdev == NULL) {
+ DBG_ERROR(et131x_dbginfo, "Couldn't alloc netdev struct\n");
+ result = -ENOMEM;
+ goto err_release_res;
+ }
+
+ /* Setup the fundamental net_device and private adapter structure elements */
+ DBG_TRACE(et131x_dbginfo, "Setting fundamental net_device info...\n");
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ if (pci_using_dac) {
+ //netdev->features |= NETIF_F_HIGHDMA;
+ }
+
+ /*
+ * NOTE - Turn this on when we're ready to deal with SG-DMA
+ *
+ * NOTE: According to "Linux Device Drivers", 3rd ed, Rubini et al,
+ * if checksumming is not performed in HW, then the kernel will not
+ * use SG.
+ * From pp 510-511:
+ *
+ * "Note that the kernel does not perform scatter/gather I/O to your
+ * device if it does not also provide some form of checksumming as
+ * well. The reason is that, if the kernel has to make a pass over a
+ * fragmented ("nonlinear") packet to calculate the checksum, it
+ * might as well copy the data and coalesce the packet at the same
+ * time."
+ *
+ * This has been verified by setting the flags below and still not
+ * receiving a scattered buffer from the network stack, so leave it
+ * off until checksums are calculated in HW.
+ */
+ //netdev->features |= NETIF_F_SG;
+ //netdev->features |= NETIF_F_NO_CSUM;
+ //netdev->features |= NETIF_F_LLTX;
+
+ /* Allocate private adapter struct and copy in relevant information */
+ adapter = netdev_priv(netdev);
+ adapter->pdev = pdev;
+ adapter->netdev = netdev;
+ adapter->VendorID = pdev->vendor;
+ adapter->DeviceID = pdev->device;
+
+ /* Do the same for the netdev struct */
+ netdev->irq = pdev->irq;
+ netdev->base_addr = pdev->resource[0].start;
+
+ /* Initialize spinlocks here */
+ DBG_TRACE(et131x_dbginfo, "Initialize spinlocks...\n");
+
+ spin_lock_init(&adapter->Lock);
+ spin_lock_init(&adapter->TCBSendQLock);
+ spin_lock_init(&adapter->TCBReadyQLock);
+ spin_lock_init(&adapter->SendHWLock);
+ spin_lock_init(&adapter->SendWaitLock);
+ spin_lock_init(&adapter->RcvLock);
+ spin_lock_init(&adapter->RcvPendLock);
+ spin_lock_init(&adapter->FbrLock);
+ spin_lock_init(&adapter->PHYLock);
+
+ /* Parse configuration parameters into the private adapter struct */
+ et131x_config_parse(adapter);
+
+ /* Find the physical adapter
+ *
+ * NOTE: This is the equivalent of the MpFindAdapter() routine; can we
+ * lump it's init with the device specific init below into a
+ * single init function?
+ */
+ //while (et131x_find_adapter(adapter, pdev) != 0);
+ et131x_find_adapter(adapter, pdev);
+
+ /* Map the bus-relative registers to system virtual memory */
+ DBG_TRACE(et131x_dbginfo,
+ "Mapping bus-relative registers to virtual memory...\n");
+
+ adapter->CSRAddress = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (adapter->CSRAddress == NULL) {
+ DBG_ERROR(et131x_dbginfo, "Cannot map device registers\n");
+ result = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ /* Perform device-specific initialization here (See code below) */
+
+ /* If Phy COMA mode was enabled when we went down, disable it here. */
+ {
+ PM_CSR_t GlobalPmCSR = { 0 };
+
+ GlobalPmCSR.bits.pm_sysclk_gate = 1;
+ GlobalPmCSR.bits.pm_txclk_gate = 1;
+ GlobalPmCSR.bits.pm_rxclk_gate = 1;
+ writel(GlobalPmCSR.value,
+ &adapter->CSRAddress->global.pm_csr.value);
+ }
+
+ /* Issue a global reset to the et1310 */
+ DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n");
+ et131x_soft_reset(adapter);
+
+ /* Disable all interrupts (paranoid) */
+ DBG_TRACE(et131x_dbginfo, "Disable device interrupts...\n");
+ et131x_disable_interrupts(adapter);
+
+ /* Allocate DMA memory */
+ result = et131x_adapter_memory_alloc(adapter);
+ if (result != 0) {
+ DBG_ERROR(et131x_dbginfo,
+ "Could not alloc adapater memory (DMA)\n");
+ goto err_iounmap;
+ }
+
+ /* Init send data structures */
+ DBG_TRACE(et131x_dbginfo, "Init send data structures...\n");
+ et131x_init_send(adapter);
+
+ adapter->PoMgmt.PowerState = NdisDeviceStateD0;
+
+ /* Register the interrupt
+ *
+ * NOTE - This is being done in the open routine, where most other
+ * Linux drivers setup IRQ handlers. Make sure device
+ * interrupts are not turned on before the IRQ is registered!!
+ *
+ * What we will do here is setup the task structure for the
+ * ISR's deferred handler
+ */
+ INIT_WORK(&adapter->task, et131x_isr_handler);
+
+ /* Determine MAC Address, and copy into the net_device struct */
+ DBG_TRACE(et131x_dbginfo, "Retrieve MAC address...\n");
+ et131x_setup_hardware_properties(adapter);
+
+ memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+
+ /* Setup et1310 as per the documentation */
+ DBG_TRACE(et131x_dbginfo, "Setup the adapter...\n");
+ et131x_adapter_setup(adapter);
+
+ /* Create a timer to count errors received by the NIC */
+ init_timer(&adapter->ErrorTimer);
+
+ adapter->ErrorTimer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000;
+ adapter->ErrorTimer.function = et131x_error_timer_handler;
+ adapter->ErrorTimer.data = (unsigned long)adapter;
+
+ /* Initialize link state */
+ et131x_link_detection_handler((unsigned long)adapter);
+
+ /* Intialize variable for counting how long we do not have link status */
+ adapter->PoMgmt.TransPhyComaModeOnBoot = 0;
+
+ /* We can enable interrupts now
+ *
+ * NOTE - Because registration of interrupt handler is done in the
+ * device's open(), defer enabling device interrupts to that
+ * point
+ */
+
+ /* Register the net_device struct with the Linux network layer */
+ DBG_TRACE(et131x_dbginfo, "Registering net_device...\n");
+ if ((result = register_netdev(netdev)) != 0) {
+ DBG_ERROR(et131x_dbginfo, "register_netdev() failed\n");
+ goto err_mem_free;
+ }
+
+ /* Register the net_device struct with the PCI subsystem. Save a copy
+ * of the PCI config space for this device now that the device has
+ * been initialized, just in case it needs to be quickly restored.
+ */
+ pci_set_drvdata(pdev, netdev);
+
+ pci_save_state(adapter->pdev);
+
+out:
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+
+err_mem_free:
+ et131x_adapter_memory_free(adapter);
+err_iounmap:
+ iounmap(adapter->CSRAddress);
+err_free_dev:
+ free_netdev(netdev);
+err_release_res:
+ pci_release_regions(pdev);
+err_disable:
+ pci_disable_device(pdev);
+ goto out;
+}
diff --git a/drivers/staging/et131x/et131x_initpci.h b/drivers/staging/et131x/et131x_initpci.h
new file mode 100644
index 0000000..bbacb62
--- /dev/null
+++ b/drivers/staging/et131x/et131x_initpci.h
@@ -0,0 +1,73 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_initpci.h - Header which includes common data and function prototypes
+ * related to the driver's PCI (and PCI Express) information.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_INITPCI_H__
+#define __ET131X_INITPCI_H__
+
+/* Function Prototypes */
+void et131x_align_allocated_memory(struct et131x_adapter *adapter,
+ u64 *phys_addr,
+ u64 *offset, u64 mask);
+
+int et131x_adapter_setup(struct et131x_adapter *adapter);
+int et131x_adapter_memory_alloc(struct et131x_adapter *adapter);
+void et131x_adapter_memory_free(struct et131x_adapter *adapter);
+void et131x_setup_hardware_properties(struct et131x_adapter *adapter);
+void et131x_soft_reset(struct et131x_adapter *adapter);
+
+#endif /* __ET131X_INITPCI_H__ */
diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c
new file mode 100644
index 0000000..00afad1
--- /dev/null
+++ b/drivers/staging/et131x/et131x_isr.c
@@ -0,0 +1,488 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_isr.c - File which contains the ISR, ISR handler, and related routines
+ * for processing interrupts from the device.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+
+#include "et131x_adapter.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+/**
+ * et131x_isr - The Interrupt Service Routine for the driver.
+ * @irq: the IRQ on which the interrupt was received.
+ * @dev_id: device-specific info (here a pointer to a net_device struct)
+ *
+ * Returns a value indicating if the interrupt was handled.
+ */
+irqreturn_t et131x_isr(int irq, void *dev_id)
+{
+ bool handled = true;
+ struct net_device *netdev = (struct net_device *)dev_id;
+ struct et131x_adapter *adapter = NULL;
+ INTERRUPT_t status;
+
+ if (netdev == NULL || !netif_device_present(netdev)) {
+ DBG_WARNING(et131x_dbginfo,
+ "No net_device struct or device not present\n");
+ handled = false;
+ goto out;
+ }
+
+ adapter = netdev_priv(netdev);
+
+ /* If the adapter is in low power state, then it should not
+ * recognize any interrupt
+ */
+
+ /* Disable Device Interrupts */
+ et131x_disable_interrupts(adapter);
+
+ /* Get a copy of the value in the interrupt status register
+ * so we can process the interrupting section
+ */
+ status.value = readl(&adapter->CSRAddress->global.int_status.value);
+
+ if (adapter->FlowControl == TxOnly ||
+ adapter->FlowControl == Both) {
+ status.value &= ~INT_MASK_ENABLE;
+ } else {
+ status.value &= ~INT_MASK_ENABLE_NO_FLOW;
+ }
+
+ /* Make sure this is our interrupt */
+ if (!status.value) {
+#ifdef CONFIG_ET131X_DEBUG
+ adapter->Stats.UnhandledInterruptsPerSec++;
+#endif
+ handled = false;
+ DBG_VERBOSE(et131x_dbginfo, "NOT OUR INTERRUPT\n");
+ et131x_enable_interrupts(adapter);
+ goto out;
+ }
+
+ /* This is our interrupt, so process accordingly */
+#ifdef CONFIG_ET131X_DEBUG
+ if (status.bits.rxdma_xfr_done) {
+ adapter->Stats.RxDmaInterruptsPerSec++;
+ }
+
+ if (status.bits.txdma_isr) {
+ adapter->Stats.TxDmaInterruptsPerSec++;
+ }
+#endif
+
+ if (status.bits.watchdog_interrupt) {
+ PMP_TCB pMpTcb = adapter->TxRing.CurrSendHead;
+
+ if (pMpTcb) {
+ if (++pMpTcb->PacketStaleCount > 1) {
+ status.bits.txdma_isr = 1;
+ }
+ }
+
+ if (adapter->RxRing.UnfinishedReceives) {
+ status.bits.rxdma_xfr_done = 1;
+ } else if (pMpTcb == NULL) {
+ writel(0, &adapter->CSRAddress->global.watchdog_timer);
+ }
+
+ status.bits.watchdog_interrupt = 0;
+#ifdef CONFIG_ET131X_DEBUG
+ adapter->Stats.WatchDogInterruptsPerSec++;
+#endif
+ }
+
+ if (status.value == 0) {
+ /* This interrupt has in some way been "handled" by
+ * the ISR. Either it was a spurious Rx interrupt, or
+ * it was a Tx interrupt that has been filtered by
+ * the ISR.
+ */
+ et131x_enable_interrupts(adapter);
+ goto out;
+ }
+
+ /* We need to save the interrupt status value for use in our
+ * DPC. We will clear the software copy of that in that
+ * routine.
+ */
+ adapter->Stats.InterruptStatus = status;
+
+ /* Schedule the ISR handler as a bottom-half task in the
+ * kernel's tq_immediate queue, and mark the queue for
+ * execution
+ */
+ schedule_work(&adapter->task);
+
+out:
+ return IRQ_RETVAL(handled);
+}
+
+/**
+ * et131x_isr_handler - The ISR handler
+ * @p_adapter, a pointer to the device's private adapter structure
+ *
+ * scheduled to run in a deferred context by the ISR. This is where the ISR's
+ * work actually gets done.
+ */
+void et131x_isr_handler(struct work_struct *work)
+{
+ struct et131x_adapter *pAdapter =
+ container_of(work, struct et131x_adapter, task);
+ INTERRUPT_t GlobStatus = pAdapter->Stats.InterruptStatus;
+ ADDRESS_MAP_t __iomem *iomem = pAdapter->CSRAddress;
+
+ /*
+ * These first two are by far the most common. Once handled, we clear
+ * their two bits in the status word. If the word is now zero, we
+ * exit.
+ */
+ /* Handle all the completed Transmit interrupts */
+ if (GlobStatus.bits.txdma_isr) {
+ DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n");
+ et131x_handle_send_interrupt(pAdapter);
+ }
+
+ /* Handle all the completed Receives interrupts */
+ if (GlobStatus.bits.rxdma_xfr_done) {
+ DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n");
+ et131x_handle_recv_interrupt(pAdapter);
+ }
+
+ GlobStatus.value &= 0xffffffd7;
+
+ if (GlobStatus.value) {
+ /* Handle the TXDMA Error interrupt */
+ if (GlobStatus.bits.txdma_err) {
+ TXDMA_ERROR_t TxDmaErr;
+
+ /* Following read also clears the register (COR) */
+ TxDmaErr.value = readl(&iomem->txdma.TxDmaError.value);
+
+ DBG_WARNING(et131x_dbginfo,
+ "TXDMA_ERR interrupt, error = %d\n",
+ TxDmaErr.value);
+ }
+
+ /* Handle Free Buffer Ring 0 and 1 Low interrupt */
+ if (GlobStatus.bits.rxdma_fb_ring0_low ||
+ GlobStatus.bits.rxdma_fb_ring1_low) {
+ /*
+ * This indicates the number of unused buffers in
+ * RXDMA free buffer ring 0 is <= the limit you
+ * programmed. Free buffer resources need to be
+ * returned. Free buffers are consumed as packets
+ * are passed from the network to the host. The host
+ * becomes aware of the packets from the contents of
+ * the packet status ring. This ring is queried when
+ * the packet done interrupt occurs. Packets are then
+ * passed to the OS. When the OS is done with the
+ * packets the resources can be returned to the
+ * ET1310 for re-use. This interrupt is one method of
+ * returning resources.
+ */
+ DBG_WARNING(et131x_dbginfo,
+ "RXDMA_FB_RING0_LOW or "
+ "RXDMA_FB_RING1_LOW interrupt\n");
+
+ /* If the user has flow control on, then we will
+ * send a pause packet, otherwise just exit
+ */
+ if (pAdapter->FlowControl == TxOnly ||
+ pAdapter->FlowControl == Both) {
+ PM_CSR_t pm_csr;
+
+ /* Tell the device to send a pause packet via
+ * the back pressure register
+ */
+ pm_csr.value = readl(&iomem->global.pm_csr.value);
+ if (pm_csr.bits.pm_phy_sw_coma == 0) {
+ TXMAC_BP_CTRL_t bp_ctrl = { 0 };
+
+ bp_ctrl.bits.bp_req = 1;
+ bp_ctrl.bits.bp_xonxoff = 1;
+ writel(bp_ctrl.value,
+ &iomem->txmac.bp_ctrl.value);
+ }
+ }
+ }
+
+ /* Handle Packet Status Ring Low Interrupt */
+ if (GlobStatus.bits.rxdma_pkt_stat_ring_low) {
+ DBG_WARNING(et131x_dbginfo,
+ "RXDMA_PKT_STAT_RING_LOW interrupt\n");
+
+ /*
+ * Same idea as with the two Free Buffer Rings.
+ * Packets going from the network to the host each
+ * consume a free buffer resource and a packet status
+ * resource. These resoures are passed to the OS.
+ * When the OS is done with the resources, they need
+ * to be returned to the ET1310. This is one method
+ * of returning the resources.
+ */
+ }
+
+ /* Handle RXDMA Error Interrupt */
+ if (GlobStatus.bits.rxdma_err) {
+ /*
+ * The rxdma_error interrupt is sent when a time-out
+ * on a request issued by the JAGCore has occurred or
+ * a completion is returned with an un-successful
+ * status. In both cases the request is considered
+ * complete. The JAGCore will automatically re-try the
+ * request in question. Normally information on events
+ * like these are sent to the host using the "Advanced
+ * Error Reporting" capability. This interrupt is
+ * another way of getting similar information. The
+ * only thing required is to clear the interrupt by
+ * reading the ISR in the global resources. The
+ * JAGCore will do a re-try on the request. Normally
+ * you should never see this interrupt. If you start
+ * to see this interrupt occurring frequently then
+ * something bad has occurred. A reset might be the
+ * thing to do.
+ */
+ // TRAP();
+
+ pAdapter->TxMacTest.value =
+ readl(&iomem->txmac.tx_test.value);
+ DBG_WARNING(et131x_dbginfo,
+ "RxDMA_ERR interrupt, error %x\n",
+ pAdapter->TxMacTest.value);
+ }
+
+ /* Handle the Wake on LAN Event */
+ if (GlobStatus.bits.wake_on_lan) {
+ /*
+ * This is a secondary interrupt for wake on LAN.
+ * The driver should never see this, if it does,
+ * something serious is wrong. We will TRAP the
+ * message when we are in DBG mode, otherwise we
+ * will ignore it.
+ */
+ DBG_ERROR(et131x_dbginfo, "WAKE_ON_LAN interrupt\n");
+ }
+
+ /* Handle the PHY interrupt */
+ if (GlobStatus.bits.phy_interrupt) {
+ PM_CSR_t pm_csr;
+ MI_BMSR_t BmsrInts, BmsrData;
+ MI_ISR_t myIsr;
+
+ DBG_VERBOSE(et131x_dbginfo, "PHY interrupt\n");
+
+ /* If we are in coma mode when we get this interrupt,
+ * we need to disable it.
+ */
+ pm_csr.value = readl(&iomem->global.pm_csr.value);
+ if (pm_csr.bits.pm_phy_sw_coma == 1) {
+ /*
+ * Check to see if we are in coma mode and if
+ * so, disable it because we will not be able
+ * to read PHY values until we are out.
+ */
+ DBG_VERBOSE(et131x_dbginfo,
+ "Device is in COMA mode, "
+ "need to wake up\n");
+ DisablePhyComa(pAdapter);
+ }
+
+ /* Read the PHY ISR to clear the reason for the
+ * interrupt.
+ */
+ MiRead(pAdapter, (uint8_t) offsetof(MI_REGS_t, isr),
+ &myIsr.value);
+
+ if (!pAdapter->ReplicaPhyLoopbk) {
+ MiRead(pAdapter,
+ (uint8_t) offsetof(MI_REGS_t, bmsr),
+ &BmsrData.value);
+
+ BmsrInts.value =
+ pAdapter->Bmsr.value ^ BmsrData.value;
+ pAdapter->Bmsr.value = BmsrData.value;
+
+ DBG_VERBOSE(et131x_dbginfo,
+ "Bmsr.value = 0x%04x,"
+ "Bmsr_ints.value = 0x%04x\n",
+ BmsrData.value, BmsrInts.value);
+
+ /* Do all the cable in / cable out stuff */
+ et131x_Mii_check(pAdapter, BmsrData, BmsrInts);
+ }
+ }
+
+ /* Let's move on to the TxMac */
+ if (GlobStatus.bits.txmac_interrupt) {
+ pAdapter->TxRing.TxMacErr.value =
+ readl(&iomem->txmac.err.value);
+
+ /*
+ * When any of the errors occur and TXMAC generates
+ * an interrupt to report these errors, it usually
+ * means that TXMAC has detected an error in the data
+ * stream retrieved from the on-chip Tx Q. All of
+ * these errors are catastrophic and TXMAC won't be
+ * able to recover data when these errors occur. In
+ * a nutshell, the whole Tx path will have to be reset
+ * and re-configured afterwards.
+ */
+ DBG_WARNING(et131x_dbginfo,
+ "TXMAC interrupt, error 0x%08x\n",
+ pAdapter->TxRing.TxMacErr.value);
+
+ /* If we are debugging, we want to see this error,
+ * otherwise we just want the device to be reset and
+ * continue
+ */
+ //DBG_TRAP();
+ }
+
+ /* Handle RXMAC Interrupt */
+ if (GlobStatus.bits.rxmac_interrupt) {
+ /*
+ * These interrupts are catastrophic to the device,
+ * what we need to do is disable the interrupts and
+ * set the flag to cause us to reset so we can solve
+ * this issue.
+ */
+ // MP_SET_FLAG( pAdapter, fMP_ADAPTER_HARDWARE_ERROR );
+
+ DBG_WARNING(et131x_dbginfo,
+ "RXMAC interrupt, error 0x%08x. Requesting reset\n",
+ readl(&iomem->rxmac.err_reg.value));
+
+ DBG_WARNING(et131x_dbginfo,
+ "Enable 0x%08x, Diag 0x%08x\n",
+ readl(&iomem->rxmac.ctrl.value),
+ readl(&iomem->rxmac.rxq_diag.value));
+
+ /*
+ * If we are debugging, we want to see this error,
+ * otherwise we just want the device to be reset and
+ * continue
+ */
+ // TRAP();
+ }
+
+ /* Handle MAC_STAT Interrupt */
+ if (GlobStatus.bits.mac_stat_interrupt) {
+ /*
+ * This means at least one of the un-masked counters
+ * in the MAC_STAT block has rolled over. Use this
+ * to maintain the top, software managed bits of the
+ * counter(s).
+ */
+ DBG_VERBOSE(et131x_dbginfo, "MAC_STAT interrupt\n");
+ HandleMacStatInterrupt(pAdapter);
+ }
+
+ /* Handle SLV Timeout Interrupt */
+ if (GlobStatus.bits.slv_timeout) {
+ /*
+ * This means a timeout has occured on a read or
+ * write request to one of the JAGCore registers. The
+ * Global Resources block has terminated the request
+ * and on a read request, returned a "fake" value.
+ * The most likely reasons are: Bad Address or the
+ * addressed module is in a power-down state and
+ * can't respond.
+ */
+ DBG_VERBOSE(et131x_dbginfo, "SLV_TIMEOUT interrupt\n");
+ }
+ }
+
+ if (pAdapter->PoMgmt.PowerState == NdisDeviceStateD0) {
+ et131x_enable_interrupts(pAdapter);
+ }
+}
diff --git a/drivers/staging/et131x/et131x_isr.h b/drivers/staging/et131x/et131x_isr.h
new file mode 100644
index 0000000..76a51d5
--- /dev/null
+++ b/drivers/staging/et131x/et131x_isr.h
@@ -0,0 +1,65 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_isr.h - Defines, structs, enums, prototypes, etc. pertaining to the
+ * ISR processing code.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_ISR_H__
+#define __ET131X_ISR_H__
+
+irqreturn_t et131x_isr(int irq, void *dev_id);
+void et131x_isr_handler(struct work_struct *work);
+
+#endif /* __ET131X_ISR_H__ */
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
new file mode 100644
index 0000000..de65972
--- /dev/null
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -0,0 +1,856 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_netdev.c - Routines and data required by all Linux network devices.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#include "et131x_version.h"
+#include "et131x_debug.h"
+#include "et131x_defs.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+
+#include "et1310_phy.h"
+#include "et1310_pm.h"
+#include "et1310_jagcore.h"
+#include "et1310_mac.h"
+#include "et1310_tx.h"
+
+#include "et131x_adapter.h"
+#include "et131x_isr.h"
+#include "et131x_initpci.h"
+
+/* Data for debugging facilities */
+#ifdef CONFIG_ET131X_DEBUG
+extern dbg_info_t *et131x_dbginfo;
+#endif /* CONFIG_ET131X_DEBUG */
+
+struct net_device_stats *et131x_stats(struct net_device *netdev);
+int et131x_open(struct net_device *netdev);
+int et131x_close(struct net_device *netdev);
+int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd);
+void et131x_multicast(struct net_device *netdev);
+int et131x_tx(struct sk_buff *skb, struct net_device *netdev);
+void et131x_tx_timeout(struct net_device *netdev);
+int et131x_change_mtu(struct net_device *netdev, int new_mtu);
+int et131x_set_mac_addr(struct net_device *netdev, void *new_mac);
+void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+
+/**
+ * et131x_device_alloc
+ *
+ * Returns pointer to the allocated and initialized net_device struct for
+ * this device.
+ *
+ * Create instances of net_device and wl_private for the new adapter and
+ * register the device's entry points in the net_device structure.
+ */
+struct net_device *et131x_device_alloc(void)
+{
+ struct net_device *netdev;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Alloc net_device and adapter structs */
+ netdev = alloc_etherdev(sizeof(struct et131x_adapter));
+
+ if (netdev == NULL) {
+ DBG_ERROR(et131x_dbginfo,
+ "Alloc of net_device struct failed\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return NULL;
+ }
+
+ /* Setup the function registration table (and other data) for a
+ * net_device
+ */
+ //netdev->init = &et131x_init;
+ //netdev->set_config = &et131x_config;
+ netdev->get_stats = &et131x_stats;
+ netdev->open = &et131x_open;
+ netdev->stop = &et131x_close;
+ netdev->do_ioctl = &et131x_ioctl;
+ netdev->set_multicast_list = &et131x_multicast;
+ netdev->hard_start_xmit = &et131x_tx;
+ netdev->tx_timeout = &et131x_tx_timeout;
+ netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
+ netdev->change_mtu = &et131x_change_mtu;
+ netdev->set_mac_address = &et131x_set_mac_addr;
+
+ //netdev->ethtool_ops = &et131x_ethtool_ops;
+
+ // Poll?
+ //netdev->poll = &et131x_poll;
+ //netdev->poll_controller = &et131x_poll_controller;
+
+ DBG_LEAVE(et131x_dbginfo);
+ return netdev;
+}
+
+/**
+ * et131x_stats - Return the current device statistics.
+ * @netdev: device whose stats are being queried
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+struct net_device_stats *et131x_stats(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ struct net_device_stats *stats = &adapter->net_stats;
+ CE_STATS_t *devstat = &adapter->Stats;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ stats->rx_packets = devstat->ipackets;
+ stats->tx_packets = devstat->opackets;
+ stats->rx_errors = devstat->length_err + devstat->alignment_err +
+ devstat->crc_err + devstat->code_violations + devstat->other_errors;
+ stats->tx_errors = devstat->max_pkt_error;
+ stats->multicast = devstat->multircv;
+ stats->collisions = devstat->collisions;
+
+ stats->rx_length_errors = devstat->length_err;
+ stats->rx_over_errors = devstat->rx_ov_flow;
+ stats->rx_crc_errors = devstat->crc_err;
+
+ // NOTE: These stats don't have corresponding values in CE_STATS, so we're
+ // going to have to update these directly from within the TX/RX code
+ //stats->rx_bytes = 20; //devstat->;
+ //stats->tx_bytes = 20; //devstat->;
+ //stats->rx_dropped = devstat->;
+ //stats->tx_dropped = devstat->;
+
+ // NOTE: Not used, can't find analogous statistics
+ //stats->rx_frame_errors = devstat->;
+ //stats->rx_fifo_errors = devstat->;
+ //stats->rx_missed_errors = devstat->;
+
+ //stats->tx_aborted_errors = devstat->;
+ //stats->tx_carrier_errors = devstat->;
+ //stats->tx_fifo_errors = devstat->;
+ //stats->tx_heartbeat_errors = devstat->;
+ //stats->tx_window_errors = devstat->;
+
+ DBG_LEAVE(et131x_dbginfo);
+ return stats;
+}
+
+/**
+ * et131x_open - Open the device for use.
+ * @netdev: device to be opened
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_open(struct net_device *netdev)
+{
+ int result = 0;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Start the timer to track NIC errors */
+ add_timer(&adapter->ErrorTimer);
+
+ /* Register our ISR */
+ DBG_TRACE(et131x_dbginfo, "Registering ISR...\n");
+
+ result =
+ request_irq(netdev->irq, et131x_isr, IRQF_SHARED, netdev->name,
+ netdev);
+ if (result) {
+ DBG_ERROR(et131x_dbginfo, "Could not register ISR\n");
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+ }
+
+ /* Enable the Tx and Rx DMA engines (if not already enabled) */
+ et131x_rx_dma_enable(adapter);
+ et131x_tx_dma_enable(adapter);
+
+ /* Enable device interrupts */
+ et131x_enable_interrupts(adapter);
+
+ MP_SET_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE);
+
+ /* We're ready to move some data, so start the queue */
+ netif_start_queue(netdev);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+}
+
+/**
+ * et131x_close - Close the device
+ * @netdev: device to be closed
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_close(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* First thing is to stop the queue */
+ netif_stop_queue(netdev);
+
+ /* Stop the Tx and Rx DMA engines */
+ et131x_rx_dma_disable(adapter);
+ et131x_tx_dma_disable(adapter);
+
+ /* Disable device interrupts */
+ et131x_disable_interrupts(adapter);
+
+ /* Deregistering ISR */
+ MP_CLEAR_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE);
+
+ DBG_TRACE(et131x_dbginfo, "Deregistering ISR...\n");
+ free_irq(netdev->irq, netdev);
+
+ /* Stop the error timer */
+ del_timer_sync(&adapter->ErrorTimer);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return 0;
+}
+
+/**
+ * et131x_ioctl_mii - The function which handles MII IOCTLs
+ * @netdev: device on which the query is being made
+ * @reqbuf: the request-specific data buffer
+ * @cmd: the command request code
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
+{
+ int status = 0;
+ struct et131x_adapter *pAdapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(reqbuf);
+
+ DBG_ENTER(et131x_dbginfo);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIPHY\n");
+ data->phy_id = pAdapter->Stats.xcvr_addr;
+ break;
+
+ case SIOCGMIIREG:
+ DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIREG\n");
+ if (!capable(CAP_NET_ADMIN)) {
+ status = -EPERM;
+ } else {
+ status = MiRead(pAdapter,
+ data->reg_num, &data->val_out);
+ }
+ break;
+
+ case SIOCSMIIREG:
+ DBG_VERBOSE(et131x_dbginfo, "SIOCSMIIREG\n");
+ if (!capable(CAP_NET_ADMIN)) {
+ status = -EPERM;
+ } else {
+ status = MiWrite(pAdapter, data->reg_num,
+ data->val_in);
+ }
+ break;
+
+ default:
+ status = -EOPNOTSUPP;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_ioctl - The I/O Control handler for the driver
+ * @netdev: device on which the control request is being made
+ * @reqbuf: a pointer to the IOCTL request buffer
+ * @cmd: the IOCTL command code
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
+{
+ int status = 0;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ status = et131x_ioctl_mii(netdev, reqbuf, cmd);
+ break;
+
+ default:
+ DBG_WARNING(et131x_dbginfo, "Unhandled IOCTL Code: 0x%04x\n",
+ cmd);
+ status = -EOPNOTSUPP;
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_set_packet_filter - Configures the Rx Packet filtering on the device
+ * @adapter: pointer to our private adapter structure
+ *
+ * Returns 0 on success, errno on failure
+ */
+int et131x_set_packet_filter(struct et131x_adapter *adapter)
+{
+ int status = 0;
+ uint32_t filter = adapter->PacketFilter;
+ RXMAC_CTRL_t ctrl;
+ RXMAC_PF_CTRL_t pf_ctrl;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ ctrl.value = readl(&adapter->CSRAddress->rxmac.ctrl.value);
+ pf_ctrl.value = readl(&adapter->CSRAddress->rxmac.pf_ctrl.value);
+
+ /* Default to disabled packet filtering. Enable it in the individual
+ * case statements that require the device to filter something
+ */
+ ctrl.bits.pkt_filter_disable = 1;
+
+ /* Set us to be in promiscuous mode so we receive everything, this
+ * is also true when we get a packet filter of 0
+ */
+ if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) {
+ pf_ctrl.bits.filter_broad_en = 0;
+ pf_ctrl.bits.filter_multi_en = 0;
+ pf_ctrl.bits.filter_uni_en = 0;
+ } else {
+ /*
+ * Set us up with Multicast packet filtering. Three cases are
+ * possible - (1) we have a multi-cast list, (2) we receive ALL
+ * multicast entries or (3) we receive none.
+ */
+ if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
+ DBG_VERBOSE(et131x_dbginfo,
+ "Multicast filtering OFF (Rx ALL MULTICAST)\n");
+ pf_ctrl.bits.filter_multi_en = 0;
+ } else {
+ DBG_VERBOSE(et131x_dbginfo, "Multicast filtering ON\n");
+ SetupDeviceForMulticast(adapter);
+ pf_ctrl.bits.filter_multi_en = 1;
+ ctrl.bits.pkt_filter_disable = 0;
+ }
+
+ /* Set us up with Unicast packet filtering */
+ if (filter & ET131X_PACKET_TYPE_DIRECTED) {
+ DBG_VERBOSE(et131x_dbginfo, "Unicast Filtering ON\n");
+ SetupDeviceForUnicast(adapter);
+ pf_ctrl.bits.filter_uni_en = 1;
+ ctrl.bits.pkt_filter_disable = 0;
+ }
+
+ /* Set us up with Broadcast packet filtering */
+ if (filter & ET131X_PACKET_TYPE_BROADCAST) {
+ DBG_VERBOSE(et131x_dbginfo, "Broadcast Filtering ON\n");
+ pf_ctrl.bits.filter_broad_en = 1;
+ ctrl.bits.pkt_filter_disable = 0;
+ } else {
+ DBG_VERBOSE(et131x_dbginfo,
+ "Broadcast Filtering OFF\n");
+ pf_ctrl.bits.filter_broad_en = 0;
+ }
+
+ /* Setup the receive mac configuration registers - Packet
+ * Filter control + the enable / disable for packet filter
+ * in the control reg.
+ */
+ writel(pf_ctrl.value,
+ &adapter->CSRAddress->rxmac.pf_ctrl.value);
+ writel(ctrl.value, &adapter->CSRAddress->rxmac.ctrl.value);
+ }
+
+ DBG_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_multicast - The handler to configure multicasting on the interface
+ * @netdev: a pointer to a net_device struct representing the device
+ */
+void et131x_multicast(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ uint32_t PacketFilter = 0;
+ uint32_t count;
+ unsigned long lockflags;
+ struct dev_mc_list *mclist = netdev->mc_list;
+
+ DBG_ENTER(et131x_dbginfo);
+
+ spin_lock_irqsave(&adapter->Lock, lockflags);
+
+ /* Before we modify the platform-independent filter flags, store them
+ * locally. This allows us to determine if anything's changed and if
+ * we even need to bother the hardware
+ */
+ PacketFilter = adapter->PacketFilter;
+
+ /* Clear the 'multicast' flag locally; becuase we only have a single
+ * flag to check multicast, and multiple multicast addresses can be
+ * set, this is the easiest way to determine if more than one
+ * multicast address is being set.
+ */
+ PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
+
+ /* Check the net_device flags and set the device independent flags
+ * accordingly
+ */
+ DBG_VERBOSE(et131x_dbginfo,
+ "MULTICAST ADDR COUNT: %d\n", netdev->mc_count);
+
+ if (netdev->flags & IFF_PROMISC) {
+ DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE ON\n");
+ adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS;
+ } else {
+ DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE OFF\n");
+ adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
+ }
+
+ if (netdev->flags & IFF_ALLMULTI) {
+ DBG_VERBOSE(et131x_dbginfo, "Request: ACCEPT ALL MULTICAST\n");
+ adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
+ }
+
+ if (netdev->mc_count > NIC_MAX_MCAST_LIST) {
+ DBG_WARNING(et131x_dbginfo,
+ "ACCEPT ALL MULTICAST for now, as there's more Multicast "
+ "addresses than the HW supports\n");
+
+ adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
+ }
+
+ if (netdev->mc_count < 1) {
+ DBG_VERBOSE(et131x_dbginfo, "Request: REJECT ALL MULTICAST\n");
+ adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
+ adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
+ } else {
+ DBG_VERBOSE(et131x_dbginfo,
+ "Request: SET MULTICAST FILTER(S)\n");
+ adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST;
+ }
+
+ /* Set values in the private adapter struct */
+ adapter->MCAddressCount = netdev->mc_count;
+
+ if (netdev->mc_count) {
+ if (mclist->dmi_addrlen != ETH_ALEN) {
+ DBG_WARNING(et131x_dbginfo,
+ "Multicast addrs are not ETH_ALEN in size\n");
+ } else {
+ count = netdev->mc_count - 1;
+ memcpy(adapter->MCList[count], mclist->dmi_addr,
+ ETH_ALEN);
+ }
+ }
+
+ /* Are the new flags different from the previous ones? If not, then no
+ * action is required
+ *
+ * NOTE - This block will always update the MCList with the hardware,
+ * even if the addresses aren't the same.
+ */
+ if (PacketFilter != adapter->PacketFilter) {
+ /* Call the device's filter function */
+ DBG_VERBOSE(et131x_dbginfo, "UPDATE REQUIRED, FLAGS changed\n");
+
+ et131x_set_packet_filter(adapter);
+ } else {
+ DBG_VERBOSE(et131x_dbginfo,
+ "NO UPDATE REQUIRED, FLAGS didn't change\n");
+ }
+
+ spin_unlock_irqrestore(&adapter->Lock, lockflags);
+
+ DBG_LEAVE(et131x_dbginfo);
+}
+
+/**
+ * et131x_tx - The handler to tx a packet on the device
+ * @skb: data to be Tx'd
+ * @netdev: device on which data is to be Tx'd
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
+{
+ int status = 0;
+
+ DBG_TX_ENTER(et131x_dbginfo);
+
+ /* Save the timestamp for the TX timeout watchdog */
+ netdev->trans_start = jiffies;
+
+ /* Call the device-specific data Tx routine */
+ status = et131x_send_packets(skb, netdev);
+
+ /* Check status and manage the netif queue if necessary */
+ if (status != 0) {
+ if (status == -ENOMEM) {
+ DBG_VERBOSE(et131x_dbginfo,
+ "OUT OF TCBs; STOP NETIF QUEUE\n");
+
+ /* Put the queue to sleep until resources are
+ * available
+ */
+ netif_stop_queue(netdev);
+ status = 1;
+ } else {
+ DBG_WARNING(et131x_dbginfo,
+ "Misc error; drop packet\n");
+ status = 0;
+ }
+ }
+
+ DBG_TX_LEAVE(et131x_dbginfo);
+ return status;
+}
+
+/**
+ * et131x_tx_timeout - Timeout handler
+ * @netdev: a pointer to a net_device struct representing the device
+ *
+ * The handler called when a Tx request times out. The timeout period is
+ * specified by the 'tx_timeo" element in the net_device structure (see
+ * et131x_alloc_device() to see how this value is set).
+ */
+void et131x_tx_timeout(struct net_device *netdev)
+{
+ struct et131x_adapter *pAdapter = netdev_priv(netdev);
+ PMP_TCB pMpTcb;
+ unsigned long lockflags;
+
+ DBG_WARNING(et131x_dbginfo, "TX TIMEOUT\n");
+
+ /* Just skip this part if the adapter is doing link detection */
+ if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION)) {
+ DBG_ERROR(et131x_dbginfo, "Still doing link detection\n");
+ return;
+ }
+
+ /* Any nonrecoverable hardware error?
+ * Checks adapter->flags for any failure in phy reading
+ */
+ if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_NON_RECOVER_ERROR)) {
+ DBG_WARNING(et131x_dbginfo, "Non recoverable error - remove\n");
+ return;
+ }
+
+ /* Hardware failure? */
+ if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_HARDWARE_ERROR)) {
+ DBG_WARNING(et131x_dbginfo, "hardware error - reset\n");
+ return;
+ }
+
+ /* Is send stuck? */
+ spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags);
+
+ pMpTcb = pAdapter->TxRing.CurrSendHead;
+
+ if (pMpTcb != NULL) {
+ pMpTcb->Count++;
+
+ if (pMpTcb->Count > NIC_SEND_HANG_THRESHOLD) {
+#ifdef CONFIG_ET131X_DEBUG
+ TX_STATUS_BLOCK_t txDmaComplete =
+ *(pAdapter->TxRing.pTxStatusVa);
+ PTX_DESC_ENTRY_t pDesc =
+ pAdapter->TxRing.pTxDescRingVa +
+ pMpTcb->WrIndex.bits.val;
+#endif
+ TX_DESC_ENTRY_t StuckDescriptors[10];
+
+ if (pMpTcb->WrIndex.bits.val > 7) {
+ memcpy(StuckDescriptors,
+ pAdapter->TxRing.pTxDescRingVa +
+ pMpTcb->WrIndex.bits.val - 6,
+ sizeof(TX_DESC_ENTRY_t) * 10);
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock,
+ lockflags);
+
+ DBG_WARNING(et131x_dbginfo,
+ "Send stuck - reset. pMpTcb->WrIndex %x, Flags 0x%08x\n",
+ pMpTcb->WrIndex.bits.val,
+ pMpTcb->Flags);
+
+ DBG_WARNING(et131x_dbginfo,
+ "pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+ pDesc->DataBufferPtrHigh,
+ pDesc->DataBufferPtrLow, pDesc->word2.value,
+ pDesc->word3.value);
+
+ DBG_WARNING(et131x_dbginfo,
+ "WbStatus 0x%08x\n", txDmaComplete.value);
+
+#ifdef CONFIG_ET131X_DEBUG
+ DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 0);
+ DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 1);
+ DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 3);
+ DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 5);
+#endif
+ et131x_close(netdev);
+ et131x_open(netdev);
+
+ return;
+ }
+ }
+
+ spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags);
+}
+
+/**
+ * et131x_change_mtu - The handler called to change the MTU for the device
+ * @netdev: device whose MTU is to be changed
+ * @new_mtu: the desired MTU
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ */
+int et131x_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ int result = 0;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ DBG_ENTER(et131x_dbginfo);
+
+ /* Make sure the requested MTU is valid */
+ if (new_mtu == 0 || new_mtu > 9216) {
+ DBG_LEAVE(et131x_dbginfo);
+ return -EINVAL;
+ }
+
+ /* Stop the netif queue */
+ netif_stop_queue(netdev);
+
+ /* Stop the Tx and Rx DMA engines */
+ et131x_rx_dma_disable(adapter);
+ et131x_tx_dma_disable(adapter);
+
+ /* Disable device interrupts */
+ et131x_disable_interrupts(adapter);
+ et131x_handle_send_interrupt(adapter);
+ et131x_handle_recv_interrupt(adapter);
+
+ /* Set the new MTU */
+ netdev->mtu = new_mtu;
+
+ /* Free Rx DMA memory */
+ et131x_adapter_memory_free(adapter);
+
+ /* Set the config parameter for Jumbo Packet support */
+ adapter->RegistryJumboPacket = new_mtu + 14;
+ et131x_soft_reset(adapter);
+
+ /* Alloc and init Rx DMA memory */
+ result = et131x_adapter_memory_alloc(adapter);
+ if (result != 0) {
+ DBG_WARNING(et131x_dbginfo,
+ "Change MTU failed; couldn't re-alloc DMA memory\n");
+ return result;
+ }
+
+ et131x_init_send(adapter);
+
+ et131x_setup_hardware_properties(adapter);
+ memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+
+ /* Init the device with the new settings */
+ et131x_adapter_setup(adapter);
+
+ /* Enable interrupts */
+ if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+ et131x_enable_interrupts(adapter);
+ }
+
+ /* Restart the Tx and Rx DMA engines */
+ et131x_rx_dma_enable(adapter);
+ et131x_tx_dma_enable(adapter);
+
+ /* Restart the netif queue */
+ netif_wake_queue(netdev);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+}
+
+/**
+ * et131x_set_mac_addr - handler to change the MAC address for the device
+ * @netdev: device whose MAC is to be changed
+ * @new_mac: the desired MAC address
+ *
+ * Returns 0 on success, errno on failure (as defined in errno.h)
+ *
+ * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
+ */
+int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
+{
+ int result = 0;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *address = new_mac;
+
+ DBG_ENTER(et131x_dbginfo);
+ // begin blux
+ // DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" );
+
+ if (adapter == NULL) {
+ DBG_LEAVE(et131x_dbginfo);
+ return -ENODEV;
+ }
+
+ /* Make sure the requested MAC is valid */
+ if (!is_valid_ether_addr(address->sa_data)) {
+ DBG_LEAVE(et131x_dbginfo);
+ return -EINVAL;
+ }
+
+ /* Stop the netif queue */
+ netif_stop_queue(netdev);
+
+ /* Stop the Tx and Rx DMA engines */
+ et131x_rx_dma_disable(adapter);
+ et131x_tx_dma_disable(adapter);
+
+ /* Disable device interrupts */
+ et131x_disable_interrupts(adapter);
+ et131x_handle_send_interrupt(adapter);
+ et131x_handle_recv_interrupt(adapter);
+
+ /* Set the new MAC */
+ // netdev->set_mac_address = &new_mac;
+ // netdev->mtu = new_mtu;
+
+ memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
+
+ printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->name, netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4],
+ netdev->dev_addr[5]);
+
+ /* Free Rx DMA memory */
+ et131x_adapter_memory_free(adapter);
+
+ /* Set the config parameter for Jumbo Packet support */
+ // adapter->RegistryJumboPacket = new_mtu + 14;
+ // blux: not needet here, w'll change the MAC
+
+ et131x_soft_reset(adapter);
+
+ /* Alloc and init Rx DMA memory */
+ result = et131x_adapter_memory_alloc(adapter);
+ if (result != 0) {
+ DBG_WARNING(et131x_dbginfo,
+ "Change MAC failed; couldn't re-alloc DMA memory\n");
+ return result;
+ }
+
+ et131x_init_send(adapter);
+
+ et131x_setup_hardware_properties(adapter);
+ // memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN );
+ // blux: no, do not override our nice address
+
+ /* Init the device with the new settings */
+ et131x_adapter_setup(adapter);
+
+ /* Enable interrupts */
+ if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) {
+ et131x_enable_interrupts(adapter);
+ }
+
+ /* Restart the Tx and Rx DMA engines */
+ et131x_rx_dma_enable(adapter);
+ et131x_tx_dma_enable(adapter);
+
+ /* Restart the netif queue */
+ netif_wake_queue(netdev);
+
+ DBG_LEAVE(et131x_dbginfo);
+ return result;
+}
diff --git a/drivers/staging/et131x/et131x_netdev.h b/drivers/staging/et131x/et131x_netdev.h
new file mode 100644
index 0000000..b8acd14
--- /dev/null
+++ b/drivers/staging/et131x/et131x_netdev.h
@@ -0,0 +1,64 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_netdev.h - Defines, structs, enums, prototypes, etc. related to the
+ * driver's net_device support.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_NETDEV_H__
+#define __ET131X_NETDEV_H__
+
+struct net_device *et131x_device_alloc(void);
+
+#endif /* __ET131X_NETDEV_H__ */
diff --git a/drivers/staging/et131x/et131x_version.h b/drivers/staging/et131x/et131x_version.h
new file mode 100644
index 0000000..2ea645e
--- /dev/null
+++ b/drivers/staging/et131x/et131x_version.h
@@ -0,0 +1,81 @@
+/*
+ * Agere Systems Inc.
+ * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ * http://www.agere.com
+ *
+ *------------------------------------------------------------------------------
+ *
+ * et131x_version.h - This file provides system and device version information.
+ *
+ *------------------------------------------------------------------------------
+ *
+ * SOFTWARE LICENSE
+ *
+ * This software is provided subject to the following terms and conditions,
+ * which you should read carefully before using the software. Using this
+ * software indicates your acceptance of these terms and conditions. If you do
+ * not agree with these terms and conditions, do not use the software.
+ *
+ * Copyright © 2005 Agere Systems Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source or binary forms, with or without
+ * modifications, are permitted provided that the following conditions are met:
+ *
+ * . Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following Disclaimer as comments in the code as
+ * well as in the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * . Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following Disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * . Neither the name of Agere Systems Inc. nor the names of the contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Disclaimer
+ *
+ * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
+ * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
+ * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ */
+
+#ifndef __ET131X_VERSION_H__
+#define __ET131X_VERSION_H__
+
+#define DRIVER_AUTHOR "Victor Soriano (vjsoriano@...re.com)"
+#define DRIVER_LICENSE "Dual BSD/GPL"
+#define DRIVER_DEVICE_STRING "ET1310"
+#define DRIVER_NAME "et131x"
+#define DRIVER_MAJOR_VERSION 1
+#define DRIVER_MINOR_VERSION 2
+#define DRIVER_PATCH_VERSION 3
+#define DRIVER_VERSION_STRING "1.2.3"
+#define DRIVER_VENDOR "Agere Systems, http://www.agere.com"
+#define DRIVER_DESC "10/100/1000 Base-T Ethernet Driver"
+
+#define STRUCT_MODULE "net" /* blux: missed by the kernel */
+
+#define DRIVER_INFO DRIVER_DESC " for the "\
+ DRIVER_DEVICE_STRING ", v" \
+ DRIVER_VERSION_STRING " by " \
+ DRIVER_VENDOR
+
+#define DRIVER_NAME_EXT "et131x.ko"
+
+#endif /* __ET131X_VERSION_H__ */
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists