| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20081013093155.21645.18716.stgit@localhost.localdomain>
Date: Mon, 13 Oct 2008 10:31:59 +0100
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: torvalds@...ux-foundation.org, linux-kernel@...r.kernel.org
Subject: [PATCH 03/80] coldfire: scheduled SERIAL_COLDFIRE removal
From: Adrian Bunk <bunk@...nel.org>
This patch contains the scheduled removal of the obsolete
SERIAL_COLDFIRE driver.
Signed-off-by: Adrian Bunk <bunk@...nel.org>
Signed-off-by: Alan Cox <alan@...hat.com>
---
Documentation/feature-removal-schedule.txt | 8
drivers/serial/Kconfig | 16
drivers/serial/Makefile | 1
drivers/serial/mcfserial.c | 1965 ----------------------------
drivers/serial/mcfserial.h | 74 -
5 files changed, 2 insertions(+), 2062 deletions(-)
delete mode 100644 drivers/serial/mcfserial.c
delete mode 100644 drivers/serial/mcfserial.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 3d2d0c2..cc8093c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -287,14 +287,6 @@ Who: Glauber Costa <gcosta@...hat.com>
---------------------------
-What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
-When: 2.6.28
-Why: This driver still uses the old interface and has been replaced
- by CONFIG_SERIAL_MCF.
-Who: Sebastian Siewior <sebastian@...akpoint.cc>
-
----------------------------
-
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 77cb342..0db2045 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -994,24 +994,12 @@ config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
-config SERIAL_COLDFIRE
- bool "ColdFire serial support (DEPRECATED)"
- depends on COLDFIRE
- help
- This driver supports the built-in serial ports of the Motorola ColdFire
- family of CPUs.
- This driver is deprecated because it supports only the old interface
- for serial drivers and features like magic keys are not working.
- Please switch to the new style driver because this driver will be
- removed soon.
-
config SERIAL_MCF
- bool "Coldfire serial support (new style driver)"
+ bool "Coldfire serial support"
depends on COLDFIRE
select SERIAL_CORE
help
- This new serial driver supports the Freescale Coldfire serial ports
- using the new serial driver subsystem.
+ This serial driver supports the Freescale Coldfire serial ports.
config SERIAL_MCF_BAUDRATE
int "Default baudrate for Coldfire serial ports"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7e7383e..1462eb3 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
deleted file mode 100644
index fbe3835..0000000
--- a/drivers/serial/mcfserial.c
+++ /dev/null
@@ -1,1965 +0,0 @@
-#warning This driver is deprecated. Check Kconfig for details.
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (C) 1999-2003 Greg Ungerer <gerg@...pgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@...p.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@...inux.org>
- *
- * Changes:
- * 08/07/2003 Daniele Bellucci <bellucda@...cali.it>
- * some cleanups in mcfrs_write.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/nettel.h>
-#include <asm/uaccess.h>
-#include "mcfserial.h"
-
-struct timer_list mcfrs_timer_struct;
-
-/*
- * Default console baud rate, we use this as the default
- * for all ports so init can just open /dev/console and
- * keep going. Perhaps one day the cflag settings for the
- * console can be used instead.
- */
-#if defined(CONFIG_HW_FEITH)
-#define CONSOLE_BAUD_RATE 38400
-#define DEFAULT_CBAUD B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
- defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-int mcfrs_console_inited = 0;
-int mcfrs_console_port = -1;
-int mcfrs_console_baud = CONSOLE_BAUD_RATE;
-int mcfrs_console_cbaud = DEFAULT_CBAUD;
-
-/*
- * Driver data structures.
- */
-static struct tty_driver *mcfrs_serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging...
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
-#else
-#define IRQBASE 73
-#endif
-
-/*
- * Configuration table, UARTs to look for at startup.
- */
-static struct mcf_serial mcfrs_table[] = {
- { /* ttyS0 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
- .irq = IRQBASE,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#ifdef MCFUART_BASE2
- { /* ttyS1 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
- .irq = IRQBASE+1,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE3
- { /* ttyS2 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
- .irq = IRQBASE+2,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE4
- { /* ttyS3 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
- .irq = IRQBASE+3,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-};
-
-
-#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
-
-/*
- * This is used to figure out the divisor speeds and the timeouts.
- */
-static int mcfrs_baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
-};
-#define MCFRS_BAUD_TABLE_SIZE \
- (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Magic system request keys. Used for debugging...
- */
-extern int magic_sysrq_key(int ch);
-#endif
-
-
-/*
- * Forware declarations...
- */
-static void mcfrs_change_speed(struct mcf_serial *info);
-static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-static inline int serial_paranoia_check(struct mcf_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char badmagic[] =
- "MCFRS(warning): bad magic number for serial struct %s in %s\n";
- static const char badinfo[] =
- "MCFRS(warning): null mcf_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Sets or clears DTR and RTS on the requested line.
- */
-static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
-#if 0
- printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
- __FILE__, __LINE__, info, dtr, rts);
-#endif
-
- local_irq_save(flags);
- if (dtr >= 0) {
-#ifdef MCFPP_DTR0
- if (info->line)
- mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
- else
- mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
-#endif
- }
- if (rts >= 0) {
- uartp = info->addr;
- if (rts) {
- info->sigs |= TIOCM_RTS;
- uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
- } else {
- info->sigs &= ~TIOCM_RTS;
- uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
- }
- }
- local_irq_restore(flags);
- return;
-}
-
-/*
- * Gets values of serial signals.
- */
-static int mcfrs_getsignals(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int sigs;
-#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
- unsigned short ppdata;
-#endif
-
-#if 0
- printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
-#endif
-
- local_irq_save(flags);
- uartp = info->addr;
- sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
- sigs |= (info->sigs & TIOCM_RTS);
-
-#ifdef MCFPP_DCD0
-{
- unsigned int ppdata;
- ppdata = mcf_getppdata();
- if (info->line == 0) {
- sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
- } else if (info->line == 1) {
- sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
- }
-}
-#endif
-
- local_irq_restore(flags);
- return(sigs);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_stop() and mcfrs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void mcfrs_stop(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
- return;
-
- local_irq_save(flags);
- uartp = info->addr;
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static void mcfrs_start(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf) {
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines. All of the following
- * subroutines are declared as inline and are folded into
- * mcfrs_interrupt(). They were separated out for readability's sake.
- *
- * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off. People who may want to modify
- * mcfrs_interrupt() should try to keep the interrupt handler as fast as
- * possible. After you are done making modifications, it is not a bad
- * idea to do:
- *
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * - Ted Ts'o (tytso@....edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static inline void receive_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- struct tty_struct *tty = info->port.tty;
- unsigned char status, ch, flag;
-
- if (!tty)
- return;
-
- uartp = info->addr;
-
- while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
- ch = uartp[MCFUART_URB];
- info->stats.rx++;
-
-#ifdef CONFIG_MAGIC_SYSRQ
- if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
- if (magic_sysrq_key(ch))
- continue;
- }
-#endif
-
- flag = TTY_NORMAL;
- if (status & MCFUART_USR_RXERR) {
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
- if (status & MCFUART_USR_RXBREAK) {
- info->stats.rxbreak++;
- flag = TTY_BREAK;
- } else if (status & MCFUART_USR_RXPARITY) {
- info->stats.rxparity++;
- flag = TTY_PARITY;
- } else if (status & MCFUART_USR_RXOVERRUN) {
- info->stats.rxoverrun++;
- flag = TTY_OVERRUN;
- } else if (status & MCFUART_USR_RXFRAMING) {
- info->stats.rxframing++;
- flag = TTY_FRAME;
- }
- }
- tty_insert_flip_char(tty, ch, flag);
- }
- tty_schedule_flip(tty);
- return;
-}
-
-static inline void transmit_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
-
- uartp = info->addr;
-
- if (info->x_char) {
- /* Send special char - probably flow control */
- uartp[MCFUART_UTB] = info->x_char;
- info->x_char = 0;
- info->stats.tx++;
- }
-
- if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- return;
- }
-
- while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
- uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->stats.tx++;
- if (--info->xmit_cnt <= 0)
- break;
- }
-
- if (info->xmit_cnt < WAKEUP_CHARS)
- schedule_work(&info->tqueue);
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t mcfrs_interrupt(int irq, void *dev_id)
-{
- struct mcf_serial *info;
- unsigned char isr;
-
- info = &mcfrs_table[(irq - IRQBASE)];
- isr = info->addr[MCFUART_UISR] & info->imr;
-
- if (isr & MCFUART_UIR_RXREADY)
- receive_chars(info);
- if (isr & MCFUART_UIR_TXREADY)
- transmit_chars(info);
- return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static void mcfrs_offintr(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_wakeup(tty);
-}
-
-
-/*
- * Change of state on a DCD line.
- */
-void mcfrs_modem_change(struct mcf_serial *info, int dcd)
-{
- if (info->count == 0)
- return;
-
- if (info->flags & ASYNC_CHECK_CD) {
- if (dcd)
- wake_up_interruptible(&info->open_wait);
- else
- schedule_work(&info->tqueue_hangup);
- }
-}
-
-
-#ifdef MCFPP_DCD0
-
-unsigned short mcfrs_ppstatus;
-
-/*
- * This subroutine is called when the RS_TIMER goes off. It is used
- * to monitor the state of the DCD lines - since they have no edge
- * sensors and interrupt generators.
- */
-static void mcfrs_timer(void)
-{
- unsigned int ppstatus, dcdval, i;
-
- ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-
- if (ppstatus != mcfrs_ppstatus) {
- for (i = 0; (i < 2); i++) {
- dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
- if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
- mcfrs_modem_change(&mcfrs_table[i],
- ((ppstatus & dcdval) ? 0 : 1));
- }
- }
- }
- mcfrs_ppstatus = ppstatus;
-
- /* Re-arm timer */
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
-}
-
-#endif /* MCFPP_DCD0 */
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (scheduler tqueue) ->
- * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
- *
- */
-static void do_serial_hangup(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_hangup(tty);
-}
-
-static int startup(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (info->flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-#endif
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = info->addr;
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- mcfrs_setsignals(info, 1, 1);
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
- mcfrs_change_speed(info);
-
- /*
- * Lastly enable the UART transmitter and receiver, and
- * interrupt enables.
- */
- info->imr = MCFUART_UIR_RXREADY;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- uartp[MCFUART_UIMR] = info->imr;
-
- info->flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("Shutting down serial port %d (irq %d)....\n", info->line,
- info->irq);
-#endif
-
- local_irq_save(flags);
-
- uartp = info->addr;
- uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
-
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
- mcfrs_setsignals(info, 0, 0);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void mcfrs_change_speed(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned int baudclk, cflag;
- unsigned long flags;
- unsigned char mr1, mr2;
- int i;
-#ifdef CONFIG_M5272
- unsigned int fraction;
-#endif
-
- if (!info->port.tty || !info->port.tty->termios)
- return;
- cflag = info->port.tty->termios->c_cflag;
- if (info->addr == 0)
- return;
-
-#if 0
- printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
-#endif
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i &= ~CBAUDEX;
- if (i < 1 || i > 4)
- info->port.tty->termios->c_cflag &= ~CBAUDEX;
- else
- i += 15;
- }
- if (i == 0) {
- mcfrs_setsignals(info, 0, -1);
- return;
- }
-
- /* compute the baudrate clock */
-#ifdef CONFIG_M5272
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
- fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
- fraction *= 16;
- fraction /= (32 * mcfrs_baud_table[i]);
-#else
- baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
-#endif
-
- info->baud = mcfrs_baud_table[i];
-
- mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
- mr2 = 0;
-
- switch (cflag & CSIZE) {
- case CS5: mr1 |= MCFUART_MR1_CS5; break;
- case CS6: mr1 |= MCFUART_MR1_CS6; break;
- case CS7: mr1 |= MCFUART_MR1_CS7; break;
- case CS8:
- default: mr1 |= MCFUART_MR1_CS8; break;
- }
-
- if (cflag & PARENB) {
- if (cflag & CMSPAR) {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYMARK;
- else
- mr1 |= MCFUART_MR1_PARITYSPACE;
- } else {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYODD;
- else
- mr1 |= MCFUART_MR1_PARITYEVEN;
- }
- } else {
- mr1 |= MCFUART_MR1_PARITYNONE;
- }
-
- if (cflag & CSTOPB)
- mr2 |= MCFUART_MR2_STOP2;
- else
- mr2 |= MCFUART_MR2_STOP1;
-
- if (cflag & CRTSCTS) {
- mr1 |= MCFUART_MR1_RXRTS;
- mr2 |= MCFUART_MR2_TXCTS;
- }
-
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- uartp = info->addr;
-
- local_irq_save(flags);
-#if 0
- printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
- mr1, mr2, baudclk);
-#endif
- /*
- Note: pg 12-16 of MCF5206e User's Manual states that a
- software reset should be performed prior to changing
- UMR1,2, UCSR, UACR, bit 7
- */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UMR] = mr1;
- uartp[MCFUART_UMR] = mr2;
- uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
- uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
-#ifdef CONFIG_M5272
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
-#endif
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- mcfrs_setsignals(info, 1, -1);
- local_irq_restore(flags);
- return;
-}
-
-static void mcfrs_flush_chars(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
- return;
-
- uartp = (volatile unsigned char *) info->addr;
-
- /*
- * re-enable receiver interrupt
- */
- local_irq_save(flags);
- if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
- (info->flags & ASYNC_INITIALIZED) ) {
- info->imr |= MCFUART_UIR_RXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
- return;
-
- /* Enable transmitter */
- local_irq_save(flags);
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static int mcfrs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
- int c, total = 0;
-
-#if 0
- printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
- __FILE__, __LINE__, (int)tty, (int)buf, count);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
- ((int)SERIAL_XMIT_SIZE) - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- local_irq_disable();
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-
- return total;
-}
-
-static int mcfrs_write_room(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int mcfrs_chars_in_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void mcfrs_flush_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
- return;
-
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
-
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void mcfrs_throttle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void mcfrs_unthrottle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mcf_serial * info,
- struct serial_struct * retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = (unsigned int) info->addr;
- tmp.irq = info->irq;
- tmp.flags = info->flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct mcf_serial * info,
- struct serial_struct * new_info)
-{
- struct serial_struct new_serial;
- struct mcf_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (info->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- unsigned char status;
-
- local_irq_save(flags);
- uartp = info->addr;
- status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
- local_irq_restore(flags);
-
- return put_user(status,value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break( struct mcf_serial * info, int duration)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!info->addr)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- uartp = info->addr;
-
- local_irq_save(flags);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
- schedule_timeout(duration);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
- local_irq_restore(flags);
-}
-
-static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- return mcfrs_getsignals(info);
-}
-
-static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int rts = -1, dtr = -1;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- mcfrs_setsignals(info, dtr, rts);
-
- return 0;
-}
-
-static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int retval, error;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, HZ/4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
- return 0;
- case TIOCGSERIAL:
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct)))
- return get_serial_info(info,
- (struct serial_struct *) arg);
- return -EFAULT;
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int)))
- return get_lsr_info(info, (unsigned int *) arg);
- return -EFAULT;
- case TIOCSERGSTRUCT:
- error = copy_to_user((struct mcf_serial *) arg,
- info, sizeof(struct mcf_serial));
- if (error)
- return -EFAULT;
- return 0;
-
-#ifdef TIOCSET422
- case TIOCSET422: {
- unsigned int val;
- get_user(val, (unsigned int *) arg);
- mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
- break;
- }
- case TIOCGET422: {
- unsigned int val;
- val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
- put_user(val, (unsigned int *) arg);
- break;
- }
-#endif
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
-
- mcfrs_change_speed(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- mcfrs_setsignals(info, -1, 1);
-#if 0
- mcfrs_start(tty);
-#endif
- }
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void mcfrs_close(struct tty_struct *tty, struct file * filp)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("MCFRS: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
- if (--info->count < 0) {
- printk("MCFRS: bad serial port count for ttyS%d: %d\n",
- info->line, info->count);
- info->count = 0;
- }
- if (info->count) {
- local_irq_restore(flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- info->imr &= ~MCFUART_UIR_RXREADY;
- uartp = info->addr;
- uartp[MCFUART_UIMR] = info->imr;
-
-#if 0
- /* FIXME: do we need to keep this enabled for console?? */
- if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
- /* Do not disable the UART */ ;
- } else
-#endif
- shutdown(info);
- mcfrs_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- info->event = 0;
- info->port.tty = NULL;
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- local_irq_restore(flags);
-}
-
-/*
- * mcfrs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void
-mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-#ifdef CONFIG_M5272
-#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */
-
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- volatile unsigned char *uartp;
- unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
- return;
-
- orig_jiffies = jiffies;
-
- /*
- * Set the check interval to be 1/5 of the approximate time
- * to send the entire fifo, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- lock_kernel();
-
- fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
- char_time = fifo_time / 5;
- if (char_time == 0)
- char_time = 1;
- if (timeout && timeout < char_time)
- char_time = timeout;
-
- /*
- * Clamp the timeout period at 2 * the time to empty the
- * fifo. Just to be safe, set the minimum at .5 seconds.
- */
- fifo_time *= 2;
- if (fifo_time < (HZ/2))
- fifo_time = HZ/2;
- if (!timeout || timeout > fifo_time)
- timeout = fifo_time;
-
- /*
- * Account for the number of bytes in the UART
- * transmitter FIFO plus any byte being shifted out.
- */
- uartp = (volatile unsigned char *) info->addr;
- for (;;) {
- fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
- if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
- MCFUART_USR_TXEMPTY)) ==
- MCFUART_USR_TXREADY)
- fifo_cnt++;
- if (fifo_cnt == 0)
- break;
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- unlock_kernel();
-#else
- /*
- * For the other coldfire models, assume all data has been sent
- */
-#endif
-}
-
-/*
- * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void mcfrs_hangup(struct tty_struct *tty)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
- return;
-
- mcfrs_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct mcf_serial *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * mcfrs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- info->count--;
- info->blocked_open++;
- while (1) {
- local_irq_disable();
- mcfrs_setsignals(info, 1, 1);
- local_irq_enable();
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int mcfrs_open(struct tty_struct *tty, struct file * filp)
-{
- struct mcf_serial *info;
- int retval, line;
-
- line = tty->index;
- if ((line < 0) || (line >= NR_PORTS))
- return -ENODEV;
- info = mcfrs_table + line;
- if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
- return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
-#endif
- info->count++;
- tty->driver_data = info;
- info->port.tty = tty;
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval)
- return retval;
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s successful...\n", tty->name);
-#endif
- return 0;
-}
-
-/*
- * Based on the line number set up the internal interrupt stuff.
- */
-static void mcfrs_irqinit(struct mcf_serial *info)
-{
-#if defined(CONFIG_M5272)
- volatile unsigned long *icrp;
- volatile unsigned long *portp;
- volatile unsigned char *uartp;
-
- uartp = info->addr;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
-
- switch (info->line) {
- case 0:
- *icrp = 0xe0000000;
- break;
- case 1:
- *icrp = 0x0e000000;
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- /* Enable the output lines for the serial ports */
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
- *portp = (*portp & ~0x000000ff) | 0x00000055;
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
- *portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x30 + info->line; /* level 6, line based priority */
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-#if defined(CONFIG_M527x)
- {
- /*
- * External Pin Mask Setting & Enable External Pin for Interface
- * mrcbis@...ceposta.it
- */
- u16 *serpin_enable_mask;
- serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *serpin_enable_mask |= UART0_ENABLE_MASK;
- else if (info->line == 1)
- *serpin_enable_mask |= UART1_ENABLE_MASK;
- else if (info->line == 2)
- *serpin_enable_mask |= UART2_ENABLE_MASK;
- }
-#endif
-#if defined(CONFIG_M528x)
- /* make sure PUAPAR is set for UART0 and UART1 */
- if (info->line < 2) {
- volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR);
- *portp |= (0x03 << (info->line * 2));
- }
-#endif
-#elif defined(CONFIG_M520x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x03;
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
- if (info->line < 2) {
- unsigned short *uart_par;
- uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0
- | MCF_GPIO_PAR_UART_PAR_URXD0;
- else if (info->line == 1)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1
- | MCF_GPIO_PAR_UART_PAR_URXD1;
- } else if (info->line == 2) {
- unsigned char *feci2c_par;
- feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
- *feci2c_par &= ~0x0F;
- *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
- | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
- }
-#elif defined(CONFIG_M532x)
- volatile unsigned char *uartp;
- uartp = info->addr;
- switch (info->line) {
- case 0:
- MCF_INTC0_ICR26 = 0x3;
- MCF_INTC0_CIMR = 26;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x000F;
- break;
- case 1:
- MCF_INTC0_ICR27 = 0x3;
- MCF_INTC0_CIMR = 27;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x0FF0;
- break;
- case 2:
- MCF_INTC0_ICR28 = 0x3;
- MCF_INTC0_CIMR = 28;
- /* GPIOs also must be initalized, depends on board */
- break;
- }
-#else
- volatile unsigned char *icrp, *uartp;
-
- switch (info->line) {
- case 0:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI1;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
- break;
- case 1:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- uartp = info->addr;
- uartp[MCFUART_UIVR] = info->irq;
-#endif
-
- /* Clear mask, so no surprise interrupts. */
- uartp[MCFUART_UIMR] = 0;
-
- if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
- "ColdFire UART", NULL)) {
- printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
- "vector=%d\n", info->line, info->irq);
- }
-
- return;
-}
-
-
-char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
-
-
-/*
- * Serial stats reporting...
- */
-int mcfrs_readproc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct mcf_serial *info;
- char str[20];
- int len, sigs, i;
-
- len = sprintf(page, mcfrs_drivername);
- for (i = 0; (i < NR_PORTS); i++) {
- info = &mcfrs_table[i];
- len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
- i, (unsigned int) info->addr, info->irq, info->baud);
- if (info->stats.rx || info->stats.tx)
- len += sprintf((page + len), "tx:%d rx:%d ",
- info->stats.tx, info->stats.rx);
- if (info->stats.rxframing)
- len += sprintf((page + len), "fe:%d ",
- info->stats.rxframing);
- if (info->stats.rxparity)
- len += sprintf((page + len), "pe:%d ",
- info->stats.rxparity);
- if (info->stats.rxbreak)
- len += sprintf((page + len), "brk:%d ",
- info->stats.rxbreak);
- if (info->stats.rxoverrun)
- len += sprintf((page + len), "oe:%d ",
- info->stats.rxoverrun);
-
- str[0] = str[1] = 0;
- if ((sigs = mcfrs_getsignals(info))) {
- if (sigs & TIOCM_RTS)
- strcat(str, "|RTS");
- if (sigs & TIOCM_CTS)
- strcat(str, "|CTS");
- if (sigs & TIOCM_DTR)
- strcat(str, "|DTR");
- if (sigs & TIOCM_CD)
- strcat(str, "|CD");
- }
-
- len += sprintf((page + len), "%s\n", &str[1]);
- }
-
- return(len);
-}
-
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk(mcfrs_drivername);
-}
-
-static const struct tty_operations mcfrs_ops = {
- .open = mcfrs_open,
- .close = mcfrs_close,
- .write = mcfrs_write,
- .flush_chars = mcfrs_flush_chars,
- .write_room = mcfrs_write_room,
- .chars_in_buffer = mcfrs_chars_in_buffer,
- .flush_buffer = mcfrs_flush_buffer,
- .ioctl = mcfrs_ioctl,
- .throttle = mcfrs_throttle,
- .unthrottle = mcfrs_unthrottle,
- .set_termios = mcfrs_set_termios,
- .stop = mcfrs_stop,
- .start = mcfrs_start,
- .hangup = mcfrs_hangup,
- .read_proc = mcfrs_readproc,
- .wait_until_sent = mcfrs_wait_until_sent,
- .tiocmget = mcfrs_tiocmget,
- .tiocmset = mcfrs_tiocmset,
-};
-
-/* mcfrs_init inits the driver */
-static int __init
-mcfrs_init(void)
-{
- struct mcf_serial *info;
- unsigned long flags;
- int i;
-
- /* Setup base handler, and timer table. */
-#ifdef MCFPP_DCD0
- init_timer(&mcfrs_timer_struct);
- mcfrs_timer_struct.function = mcfrs_timer;
- mcfrs_timer_struct.data = 0;
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
- mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-#endif
- mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!mcfrs_serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- mcfrs_serial_driver->owner = THIS_MODULE;
- mcfrs_serial_driver->name = "ttyS";
- mcfrs_serial_driver->driver_name = "mcfserial";
- mcfrs_serial_driver->major = TTY_MAJOR;
- mcfrs_serial_driver->minor_start = 64;
- mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- mcfrs_serial_driver->init_termios = tty_std_termios;
-
- mcfrs_serial_driver->init_termios.c_cflag =
- mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
- tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
-
- if (tty_register_driver(mcfrs_serial_driver)) {
- printk("MCFRS: Couldn't register serial driver\n");
- put_tty_driver(mcfrs_serial_driver);
- return(-EBUSY);
- }
-
- local_irq_save(flags);
-
- /*
- * Configure all the attached serial ports.
- */
- for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
- info->magic = SERIAL_MAGIC;
- info->line = i;
- info->port.tty = NULL;
- info->custom_divisor = 16;
- info->close_delay = 50;
- info->closing_wait = 3000;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- INIT_WORK(&info->tqueue, mcfrs_offintr);
- INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
-
- info->imr = 0;
- mcfrs_setsignals(info, 0, 0);
- mcfrs_irqinit(info);
-
- printk("ttyS%d at 0x%04x (irq = %d)", info->line,
- (unsigned int) info->addr, info->irq);
- printk(" is a builtin ColdFire UART\n");
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-module_init(mcfrs_init);
-
-/****************************************************************************/
-/* Serial Console */
-/****************************************************************************/
-
-/*
- * Quick and dirty UART initialization, for console output.
- */
-
-void mcfrs_init_console(void)
-{
- volatile unsigned char *uartp;
- unsigned int clk;
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
-
- /*
- * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
- */
- uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
- uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
-#ifdef CONFIG_M5272
-{
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
- fraction *= 16;
- fraction /= (32 * mcfrs_console_baud);
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
- clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
-}
-#else
- clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
-#endif
-
- uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
- uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
- mcfrs_console_inited++;
- return;
-}
-
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-int mcfrs_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (!strncmp(cp->name, "ttyS", 4))
- mcfrs_console_port = cp->index;
- else if (!strncmp(cp->name, "cua", 3))
- mcfrs_console_port = cp->index;
- else
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg,NULL,0);
- for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
- if (mcfrs_baud_table[i] == n)
- break;
- if (i < MCFRS_BAUD_TABLE_SIZE) {
- mcfrs_console_baud = n;
- mcfrs_console_cbaud = 0;
- if (i > 15) {
- mcfrs_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- mcfrs_console_cbaud |= i;
- }
- mcfrs_init_console(); /* make sure baud rate changes */
- return(0);
-}
-
-
-static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return mcfrs_serial_driver;
-}
-
-
-/*
- * Output a single character, using UART polled mode.
- * This is used for console output.
- */
-
-int mcfrs_put_char(char ch)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int i;
-
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- local_irq_save(flags);
- for (i = 0; (i < 0x10000); i++) {
- if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
- break;
- }
- if (i < 0x10000) {
- uartp[MCFUART_UTB] = ch;
- for (i = 0; (i < 0x10000); i++)
- if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
- break;
- }
- if (i >= 0x10000)
- mcfrs_init_console(); /* try and get it back */
- local_irq_restore(flags);
-
- return 1;
-}
-
-
-/*
- * rs_console_write is registered for printk output.
- */
-
-void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
-{
- if (!mcfrs_console_inited)
- mcfrs_init_console();
- while (len-- > 0) {
- if (*p == '\n')
- mcfrs_put_char('\r');
- mcfrs_put_char(*p++);
- }
-}
-
-/*
- * declare our consoles
- */
-
-struct console mcfrs_console = {
- .name = "ttyS",
- .write = mcfrs_console_write,
- .device = mcfrs_console_device,
- .setup = mcfrs_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init mcfrs_console_init(void)
-{
- register_console(&mcfrs_console);
- return 0;
-}
-
-console_initcall(mcfrs_console_init);
-
-/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
deleted file mode 100644
index 56420e2..0000000
--- a/drivers/serial/mcfserial.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (c) 1999 Greg Ungerer <gerg@...pgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@...p.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@...inux.org>
- */
-#ifndef _MCF_SERIAL_H
-#define _MCF_SERIAL_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/*
- * Define a local serial stats structure.
- */
-
-struct mcf_stats {
- unsigned int rx;
- unsigned int tx;
- unsigned int rxbreak;
- unsigned int rxframing;
- unsigned int rxparity;
- unsigned int rxoverrun;
-};
-
-
-/*
- * This is our internal structure for each serial port's state.
- * Each serial port has one of these structures associated with it.
- */
-
-struct mcf_serial {
- int magic;
- volatile unsigned char *addr; /* UART memory address */
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- unsigned char imr; /* Software imr register */
- unsigned int baud;
- int sigs;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int baud_base;
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mcf_stats stats;
- struct work_struct tqueue;
- struct work_struct tqueue_hangup;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _MCF_SERIAL_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists