linux-kernel - Re: e1000e: sporadic "hardware error"s with Intel 82563EB on Supermicro X7DB3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <48F463D1.70605@siemens.com>
Date:	Tue, 14 Oct 2008 11:18:09 +0200
From:	Gernot Hillier <gernot.hillier@...mens.com>
To:	"Graham, David" <david.graham@...el.com>
CC:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	"Allan, Bruce W" <bruce.w.allan@...el.com>,
	"Hockert, Jeff W" <jeff.w.hockert@...el.com>
Subject: Re: e1000e: sporadic "hardware error"s with Intel 82563EB on Supermicro
 X7DB3

Hi Dave!

Sorry for the delay (and the self-follow-up), but now I can hopefully
provide answers to all your questions...

Hillier, Gernot wrote:
> However, one detail confuses us: we can currently reproduce this problem on
> two machines. One of them is equipped with an optional IPMI card, the other
> one isn't. (The Supermicro X7DB3 doesn't include full IPMI support onboard,
> but has a "LP IPMI 2.0 (SIMLP) Slot" where you can place an optional card).

The "IPMI card" we use is a "Supermicro AOC-SIMLP-B".

Overview: http://www.supermicro.com/products/accessories/addon/sim.cfm
Manual:   http://www.supermicro.com/manuals/other/AOC-SIMLP.pdf

> The box with the IPMI card shows the hardware errors quite often (in one of
> about 200 tries) while the other box still shows the problem, but much more
> seldom (in one of >1000 tries). Now we wonder if the BMC is on the IPMI
> card or on the board itself - in the first case, I'm not sure if you thesis
> fully explains the problems we can see.

However, after digging through some manuals, I'm quite sure the BMC is
integrated in the Intel ESB2 I/O Controller Hub used on our board, not
on the IPMI card. So we should have an Intel BMC.

> And there's another detail I'd like to mention: we first found the problem
> by doing continuous reboots as originally described, but we found we can
> also reproduce it with an endless loop of "rmmod;sleep 3;modprobe". Does
> this somehow contradict with your thesis?
> 
>> There have been further improvements made to the driver synchronization
>> code since the 0.3.3.3-k2 driver, and it is possible that a newer driver
>> would resolve the issue. It'd be good for us to know if that's the case.
>> The driver version is not yet (AFAICS) upstream, but is already
>> available in the standalone e1000e-0.4.1.7 driver on sourceforge.
>> (google "sourceforge e1000e"). Would you be able to try that, as a first
>> step ? 
> 
> Yes, I did. Unfortunately, 0.4.1.7 still shows the problem - on both machines:
> 
> e1000e: Intel(R) PRO/1000 Network Driver - 0.4.1.7-NAPI
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:06:00.0 to 64
> 0000:06:00.0: 0000:06:00.0: Hardware Error
> 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:30:48:66:c7:06
> 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
> 0000:06:00.0: eth0: MAC: 5, PHY: 5, PBA No: 2050ff-0ff
> ACPI: PCI Interrupt 0000:06:00.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:06:00.1 to 64
> 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:30:48:66:c7:07
> 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
> 0000:06:00.1: eth1: MAC: 5, PHY: 5, PBA No: 2050ff-0ff
> 0000:06:00.0: eth0: Hardware Error
> 0000:06:00.0: eth0: Hardware Error
> 0000:06:00.0: eth0: Hardware Error
> 0000:06:00.0: eth0: Hardware Error
> 0000:06:00.0: eth0: Hardware Error
> 
> Is there any further debug code I could add to narrow down things?
> 
>> If this does not resolve the issue for the Supermicro board, you likely
>> also require a "FW-side" fix, and this comes in one of two flavors. If
>> the board has an INTEL BMC, then we will need to update it with a new
>> BMC version. If the board has a Supermicro BMC (I expect that it does),
>> then we can provide a patch to some of the platform microcode using a
>> EEPROM update.  To determine which is appropriate for you, we'll need to
>> know more about the platform. There's probably a BMC version number on
>> one of the BIOS menus. I can work with you to find the info we need, and
>> then, to help you to perform the necessary steps to perform an upgrade. 
> 
[...]
Still no helpful contact within Supermicro, but we found the following
information in the web interface provided by the "IPMI card":

Device InformationProduct Name: Supermicro Daughter Card
Serial Number: 02969601ac46a6df
Device IP Address: 192.168.2.4
Device MAC Address: 08:15:08:15:08:15
Firmware Version: 01.59.00
Firmware Build Number: 5420
Firmware Description: Sep-29-2008-09-45-NonKVM
Hardware Revision: 0x22

The BIOS IPMI menu itself says:

IPMI Specification Version: 2.0
Firmware Version: 1.59

I hope that those details answered your questions, so that we can
proceed with your suggestions. Think we now need the "new BMC version"
you mentioned, right?

If there's anything I can test or lookup from the software side to
speedup things (like additional debugging of the driver, etc.), please
don't hesitate to ask!

--
Gernot
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/