Message-Id: <200810141944.m9EJiPb9011693@hitchhiker>
Date:	Tue, 14 Oct 2008 21:44:25 +0200
From:	Alain Knaff <alain@...ff.lu>
To:	<hpa@...or.com>, <linux-kernel@...r.kernel.org>, <alain@...ff.lu>
Subject: update7 [PATCH 2/5] init: bzip2 or lzma -compressed kernels and initrds

This is the second part of the bzip2/lzma patch

The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip.  Lzma's decompresses faster
than bzip2.

It also supports ramdisks and initramfs' compressed using these two
compressors.

The functionality has been successfully used for a couple of years by
the udpcast project

This version applies to "tip" kernel 2.6.27

This part contains:
- support for new compressions (bzip2 and lzma) in initramfs and
old-style ramdisk
- config dialog for kernel compression (but new kernel compressions
not yet supported)

Signed-off-by: Alain Knaff <alain@...ff.lu>

---

diff -urNp library/drivers/block/Kconfig generic/drivers/block/Kconfig
--- library/drivers/block/Kconfig	2008-10-11 14:11:56.000000000 +0200
+++ generic/drivers/block/Kconfig	2008-10-13 22:55:42.000000000 +0200
@@ -357,6 +357,30 @@ config BLK_DEV_XIP
 	  will prevent RAM block device backing store memory from being
 	  allocated from highmem (only a problem for highmem systems).
 
+config RD_BZIP2
+	bool "Initial ramdisk compressed using bzip2"
+	default n
+	depends on BLK_DEV_INITRD=y
+	help
+	  Support loading of a bzip2 encoded initial ramdisk or cpio buffer
+	  If unsure, say N.
+
+config RD_LZMA
+	bool "Initial ramdisk compressed using lzma"
+	default n
+	depends on BLK_DEV_INITRD=y
+	help
+	  Support loading of a lzma encoded initial ramdisk or cpio buffer
+	  If unsure, say N.
+
+config RD_GZIP
+	bool "Initial ramdisk compressed using gzip"
+	default y
+	depends on BLK_DEV_INITRD=y
+	help
+	  Support loading of a gzip encoded initial ramdisk or cpio buffer.
+	  If unsure, say Y.
+
 config CDROM_PKTCDVD
 	tristate "Packet writing on CD/DVD media"
 	depends on !UML
diff -urNp library/include/linux/decompress/mm.h generic/include/linux/decompress/mm.h
--- library/include/linux/decompress/mm.h	2008-10-14 00:59:56.000000000 +0200
+++ generic/include/linux/decompress/mm.h	2008-10-14 01:22:39.000000000 +0200
@@ -10,7 +10,7 @@
 #ifndef DECOMPR_MM_H
 #define DECOMPR_MM_H
 
-#ifndef NO_INFLATE_MALLOC
+#ifdef STATIC
 
 /* Code active when included from pre-boot environment: */
 
@@ -56,7 +56,7 @@ static void free(void *where)
 
 #define INIT
 
-#else /* NO_INFLATE_MALLOC */
+#else /* STATIC */
 
 /* Code active when compiled standalone for use when loading ramdisk: */
 
@@ -75,16 +75,15 @@ static void free(void *where)
 #define large_malloc(a) vmalloc(a)
 #define large_free(a) vfree(a)
 
-#if 0 /* temporarily disable this section until generic is patched */
 static void(*error)(char *m);
 #define set_error_fn(x) error = x;
+#define NEW_CODE
 
 #define INIT __init
 #define STATIC
-#endif /* 0 */
 
 #include <linux/init.h>
 
-#endif /* NO_INFLATE_MALLOC */
+#endif /* STATIC */
 
 #endif /* DECOMPR_MM_H */
diff -urNp library/init/do_mounts_rd.c generic/init/do_mounts_rd.c
--- library/init/do_mounts_rd.c	2008-10-11 14:12:10.000000000 +0200
+++ generic/init/do_mounts_rd.c	2008-10-14 21:15:57.000000000 +0200
@@ -10,6 +10,12 @@
 
 #include "do_mounts.h"
 
+#include <linux/decompress/generic.h>
+
+#include <linux/decompress/bunzip2.h>
+#include <linux/decompress/unlzma.h>
+#include <linux/decompress/inflate.h>
+
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -28,7 +34,7 @@ static int __init ramdisk_start_setup(ch
 }
 __setup("ramdisk_start=", ramdisk_start_setup);
 
-static int __init crd_load(int in_fd, int out_fd);
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
 
 /*
  * This routine tries to find a RAM disk image to load, and returns the
@@ -44,7 +50,7 @@ static int __init crd_load(int in_fd, in
  * 	gzip
  */
 static int __init 
-identify_ramdisk_image(int fd, int start_block)
+identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 {
 	const int size = 512;
 	struct minix_super_block *minixsb;
@@ -70,6 +76,7 @@ identify_ramdisk_image(int fd, int start
 	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	sys_read(fd, buf, size);
 
+#ifdef CONFIG_RD_GZIP
 	/*
 	 * If it matches the gzip magic numbers, return -1
 	 */
@@ -77,9 +84,39 @@ identify_ramdisk_image(int fd, int start
 		printk(KERN_NOTICE
 		       "RAMDISK: Compressed image found at block %d\n",
 		       start_block);
+		*decompressor = gunzip;
+		nblocks = 0;
+		goto done;
+	}
+#endif
+
+#ifdef CONFIG_RD_BZIP2
+	/*
+	 * If it matches the bzip2 magic numbers, return -1
+	 */
+	if (buf[0] == 0x42 && (buf[1] == 0x5a)) {
+		printk(KERN_NOTICE
+		       "RAMDISK: Bzipped image found at block %d\n",
+		       start_block);
+		*decompressor = bunzip2;
 		nblocks = 0;
 		goto done;
 	}
+#endif
+
+#ifdef CONFIG_RD_LZMA
+	/*
+	 * If it matches the lzma magic numbers, return -1
+	 */
+	if (buf[0] == 0x5d && (buf[1] == 0x00)) {
+		printk(KERN_NOTICE
+		       "RAMDISK: Lzma image found at block %d\n",
+		       start_block);
+		*decompressor = unlzma;
+		nblocks = 0;
+		goto done;
+	}
+#endif
 
 	/* romfs is at block zero too */
 	if (romfsb->word0 == ROMSB_WORD0 &&
@@ -143,6 +180,7 @@ int __init rd_load_image(char *from)
 	int nblocks, i, disk;
 	char *buf = NULL;
 	unsigned short rotate = 0;
+	decompress_fn decompressor = NULL;
 #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
 	char rotator[4] = { '|' , '/' , '-' , '\\' };
 #endif
@@ -155,12 +193,12 @@ int __init rd_load_image(char *from)
 	if (in_fd < 0)
 		goto noclose_input;
 
-	nblocks = identify_ramdisk_image(in_fd, rd_image_start);
+	nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
 	if (nblocks < 0)
 		goto done;
 
 	if (nblocks == 0) {
-		if (crd_load(in_fd, out_fd) == 0)
+		if (crd_load(in_fd, out_fd, decompressor) == 0)
 			goto successful_load;
 		goto done;
 	}
@@ -259,138 +297,48 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define INBUFSIZ 4096
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
 static int exit_code;
-static int unzip_error;
-static long bytes_out;
+static int decompress_error;
 static int crd_infd, crd_outfd;
 
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static int  __init fill_inbuf(void);
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- * Returning -1 does not guarantee that gunzip() will ever return.
- */
-static int __init fill_inbuf(void)
+static int __init compr_fill(void *buf, unsigned int len)
 {
-	if (exit_code) return -1;
-	
-	insize = sys_read(crd_infd, inbuf, INBUFSIZ);
-	if (insize == 0) {
-		error("RAMDISK: ran out of compressed data");
-		return -1;
-	}
-
-	inptr = 1;
-
-	return inbuf[0];
+	int r = sys_read(crd_infd, buf, len);
+	if (r < 0)
+		printk(KERN_ERR "RAMDISK: error while reading compressed data");
+	else if (r == 0)
+		printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
+	return r;
 }
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
+static int __init compr_flush(void *window, unsigned int outcnt)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n, written;
-    uch *in, ch;
-    
-    written = sys_write(crd_outfd, window, outcnt);
-    if (written != outcnt && unzip_error == 0) {
-	printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
-	       written, outcnt, bytes_out);
-	unzip_error = 1;
-    }
-    in = window;
-    for (n = 0; n < outcnt; n++) {
-	    ch = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    outcnt = 0;
+	int written = sys_write(crd_outfd, window, outcnt);
+	if (written != outcnt) {
+		if (decompress_error == 0)
+			printk(KERN_ERR
+			       "RAMDISK: incomplete write (%d != %d)\n",
+			       written, outcnt);
+		decompress_error = 1;
+		return -1;
+	}
+	return outcnt;
 }
 
 static void __init error(char *x)
 {
 	printk(KERN_ERR "%s\n", x);
 	exit_code = 1;
-	unzip_error = 1;
+	decompress_error = 1;
 }
 
-static int __init crd_load(int in_fd, int out_fd)
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
 {
 	int result;
-
-	insize = 0;		/* valid bytes in inbuf */
-	inptr = 0;		/* index of next byte to be processed in inbuf */
-	outcnt = 0;		/* bytes in output buffer */
-	exit_code = 0;
-	bytes_out = 0;
-	crc = (ulg)0xffffffffL; /* shift register contents */
-
 	crd_infd = in_fd;
 	crd_outfd = out_fd;
-	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
-	if (!inbuf) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
-		return -1;
-	}
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
-		kfree(inbuf);
-		return -1;
-	}
-	makecrc();
-	result = gunzip();
-	if (unzip_error)
+	result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
+	if (decompress_error)
 		result = 1;
-	kfree(inbuf);
-	kfree(window);
 	return result;
 }
diff -urNp library/init/initramfs.c generic/init/initramfs.c
--- library/init/initramfs.c	2008-10-13 22:22:37.000000000 +0200
+++ generic/init/initramfs.c	2008-10-14 20:28:20.000000000 +0200
@@ -330,11 +330,14 @@ static int __init write_buffer(char *buf
 	return len - count;
 }
 
-static void __init flush_buffer(char *buf, unsigned len)
+
+static int __init flush_buffer(void *bufv, unsigned len)
 {
+	char *buf = (char *) bufv;
 	int written;
+	int origLen = len;
 	if (message)
-		return;
+		return -1;
 	while ((written = write_buffer(buf, len)) < len && !message) {
 		char c = buf[written];
 		if (c == '0') {
@@ -348,73 +351,14 @@ static void __init flush_buffer(char *bu
 		} else
 			error("junk in compressed archive");
 	}
+	return origLen;
 }
 
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
+static unsigned my_inptr;   /* index of next byte to be processed in inbuf */
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
-static long bytes_out;
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : -1)
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, ch;
-
-	flush_buffer(window, outcnt);
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	outcnt = 0;
-}
+#include <linux/decompress/bunzip2.h>
+#include <linux/decompress/unlzma.h>
+#include <linux/decompress/inflate.h>
 
 static char * __init unpack_to_rootfs(char *buf, unsigned len)
 {
@@ -422,9 +366,10 @@ static char * __init unpack_to_rootfs(ch
 	header_buf = kmalloc(110, GFP_KERNEL);
 	symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL);
 	name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL);
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window || !header_buf || !symlink_buf || !name_buf)
+
+	if (!header_buf || !symlink_buf || !name_buf)
 		panic("can't allocate buffers");
+
 	state = Start;
 	this_header = 0;
 	message = NULL;
@@ -444,21 +389,39 @@ static char * __init unpack_to_rootfs(ch
 			continue;
 		}
 		this_header = 0;
-		insize = len;
-		inbuf = buf;
-		inptr = 0;
-		outcnt = 0;		/* bytes in output buffer */
-		bytes_out = 0;
-		crc = (ulg)0xffffffffL; /* shift register contents */
-		makecrc();
-		gunzip();
+		if (!gunzip(buf, len, NULL, flush_buffer, NULL,
+			    &my_inptr, error) &&
+		    message == NULL)
+			goto ok;
+
+#ifdef CONFIG_RD_BZIP2
+		message = NULL; /* Zero out message, or else cpio will
+				   think an error has already occured */
+		if (!bunzip2(buf, len, NULL, flush_buffer, NULL,
+			     &my_inptr, error) < 0
+		    &&
+		    message == NULL) {
+			goto ok;
+		}
+#endif
+
+#ifdef CONFIG_RD_LZMA
+		message = NULL; /* Zero out message, or else cpio will
+				   think an error has already occured */
+		if (!unlzma(buf, len, NULL, flush_buffer, NULL,
+			    &my_inptr, error) < 0
+		    &&
+		    message == NULL) {
+			goto ok;
+		}
+#endif
+ok:
 		if (state != Reset)
-			error("junk in gzipped archive");
-		this_header = saved_offset + inptr;
-		buf += inptr;
-		len -= inptr;
+			error("junk in compressed archive");
+		this_header = saved_offset + my_inptr;
+		buf += my_inptr;
+		len -= my_inptr;
 	}
-	kfree(window);
 	kfree(name_buf);
 	kfree(symlink_buf);
 	kfree(header_buf);
diff -urNp library/init/Kconfig generic/init/Kconfig
--- library/init/Kconfig	2008-10-11 14:12:10.000000000 +0200
+++ generic/init/Kconfig	2008-10-13 22:55:42.000000000 +0200
@@ -101,6 +101,56 @@ config LOCALVERSION_AUTO
 
 	  which is done within the script "scripts/setlocalversion".)
 
+choice
+        prompt "Kernel compression mode"
+        default KERNEL_GZIP
+        help
+	  The linux kernel is a kind of self-extracting executable.
+	  Several compression algorithms are available, which differ
+	  in efficiency, compression and decompression speed.
+	  Compression speed is only relevant when building a kernel.
+	  Decompression speed is relevant at each boot.
+
+	  If you have any problems with bzip2 or lzma compressed
+	  kernels, mail me (Alain Knaff) <alain@...ff.lu>. (An older
+	  version of this functionality (bzip2 only), for 2.4, was
+	  supplied by Christian Ludwig)
+
+	  High compression options are mostly useful for users, who
+	  are low on disk space (embedded systems), but for whom ram
+	  size matters less.
+
+	  If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+       bool "Gzip"
+       help
+         The old and tried gzip compression. Its compression ratio is
+	 the poorest among the 3 choices; however its speed (both
+	 compression and decompression) is the fastest.
+
+config KERNEL_BZIP2
+	bool "Bzip2"
+	help
+	  Its compression ratio and speed is intermediate.
+	  Decompression speed is slowest among the 3.
+	  The kernel size is about 10 per cent smaller with bzip2,
+	  in comparison to gzip.
+	  Bzip2 uses a large amount of memory. For modern kernels
+	  you will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+       bool "LZMA"
+       help
+         The most recent compression algorithm.
+	 Its ratio is best, decompression speed is between the other
+	 2. Compression is slowest.
+	 The kernel size is about 33 per cent smaller with lzma,
+	 in comparison to gzip.
+
+endchoice
+
+
 config SWAP
 	bool "Support for paging of anonymous memory (swap)"
 	depends on MMU && BLOCK
diff -urNp library/lib/Makefile generic/lib/Makefile
--- library/lib/Makefile	2008-10-14 20:35:57.000000000 +0200
+++ generic/lib/Makefile	2008-10-14 20:36:36.000000000 +0200
@@ -58,6 +58,10 @@ obj-$(CONFIG_CRC7)	+= crc7.o
 obj-$(CONFIG_LIBCRC32C)	+= libcrc32c.o
 obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
 
+obj-y			+= inflate.o
+obj-$(CONFIG_RD_BZIP2)	+= decompress_bunzip2.o
+obj-$(CONFIG_RD_LZMA)	+= decompress_unlzma.o
+
 obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
 obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
 obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists