| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200810141944.m9EJiSq8011717@hitchhiker>
Date: Tue, 14 Oct 2008 21:44:28 +0200
From: Alain Knaff <alain@...ff.lu>
To: <hpa@...or.com>, <linux-kernel@...r.kernel.org>, <alain@...ff.lu>
Subject: update7 [PATCH 5/5] init: bzip2 or lzma -compressed kernels and initrds
This is the fifth part of the bzip2/lzma patch
The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip. Lzma's decompresses faster
than bzip2.
It also supports ramdisks and initramfs' compressed using these two
compressors.
The functionality has been successfully used for a couple of years by
the udpcast project
This version applies to "tip" kernel 2.6.27
This part contains:
- cleanup of NEW_CODE ifdefs
Signed-off-by: Alain Knaff <alain@...ff.lu>
---
diff -urNp arm/arch/arm/boot/compressed/misc.c final/arch/arm/boot/compressed/misc.c
--- arm/arch/arm/boot/compressed/misc.c 2008-10-14 02:14:38.000000000 +0200
+++ final/arch/arm/boot/compressed/misc.c 2008-10-14 02:14:58.000000000 +0200
@@ -182,7 +182,6 @@ static ulg free_mem_ptr;
static ulg free_mem_end_ptr;
#define ARCH_HAS_DECOMP_WDOG
-#define NEW_CODE
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/inflate.c"
diff -urNp arm/arch/x86/boot/compressed/misc.c final/arch/x86/boot/compressed/misc.c
--- arm/arch/x86/boot/compressed/misc.c 2008-10-14 01:50:59.000000000 +0200
+++ final/arch/x86/boot/compressed/misc.c 2008-10-14 01:51:22.000000000 +0200
@@ -150,8 +150,6 @@ static char *vidmem;
static int vidport;
static int lines, cols;
-#define NEW_CODE
-
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/inflate.c"
#endif
diff -urNp arm/include/linux/decompress/mm.h final/include/linux/decompress/mm.h
--- arm/include/linux/decompress/mm.h 2008-10-14 01:57:39.000000000 +0200
+++ final/include/linux/decompress/mm.h 2008-10-14 01:37:39.000000000 +0200
@@ -77,7 +77,6 @@ static void free(void *where)
static void(*error)(char *m);
#define set_error_fn(x) error = x;
-#define NEW_CODE
#define INIT __init
#define STATIC
diff -urNp arm/lib/inflate.c final/lib/inflate.c
--- arm/lib/inflate.c 2008-10-14 01:20:26.000000000 +0200
+++ final/lib/inflate.c 2008-10-14 01:35:45.000000000 +0200
@@ -116,7 +116,6 @@ static char rcsid[] = "#Id: inflate.c,v
#include <linux/string.h>
-#ifdef NEW_CODE
static int(*flush_cb)(void*, unsigned int);
static int(*fill_cb)(void*, unsigned int);
@@ -179,7 +178,6 @@ static int INIT fill_inbuf(void)
static void flush_window(void);
/* End stuff copied from initramfs */
-#endif
#define slide window
@@ -680,19 +678,16 @@ STATIC int INIT inflate_codes(
/* do the copy */
do {
-#ifdef NEW_CODE
if (flush_cb) {
-#endif
/* Sliding window emulated using circular buffer:
* manage wrap-around */
e = WSIZE - ((d &= WSIZE-1) > w ? d : w);
if (e > n)
e = n;
-#ifdef NEW_CODE
} else {
e = n;
}
-#endif
+
n -= e;
#if !defined(NOMEMCPY) && !defined(DEBUG)
@@ -1218,7 +1213,6 @@ makecrc(void)
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
-#ifdef NEW_CODE
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
@@ -1247,23 +1241,18 @@ static int empty_fill(void *buf, unsigne
{
return 0;
}
-#endif
+
/*
* Do the uncompression!
*/
-STATIC int INIT gunzip(
-#ifdef NEW_CODE
- unsigned char *buf, int len,
+STATIC int INIT gunzip(unsigned char *buf, int len,
int(*fill)(void*, unsigned int),
int(*flush)(void*, unsigned int),
unsigned char *output,
int *posp,
void(*error_fn)(char *x)
-#else
- void
-#endif
)
{
uint8_t flags;
@@ -1273,7 +1262,6 @@ STATIC int INIT gunzip(
uint32_t orig_len = 0; /* original uncompressed length */
int res;
-#ifdef NEW_CODE
set_error_fn(error_fn);
if (fill == NULL)
fill_cb = empty_fill;
@@ -1293,8 +1281,6 @@ STATIC int INIT gunzip(
inbuf = buf;
else
inbuf = malloc(INBUFSIZ);
-#endif
-
inptr = 0;
outcnt = 0; /* bytes in output buffer */
bytes_out = 0;
@@ -1401,20 +1387,16 @@ STATIC int INIT gunzip(
error("length error");
return -1;
}
-#ifdef NEW_CODE
if (!output)
free(window);
if (posp)
*posp = inptr;
-#endif
return 0;
underrun: /* NEXTBYTE() goto's here if needed */
free(window);
-#ifdef NEW_CODE
if (!buf)
free(inbuf);
-#endif
error("out of input data");
return -1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists