[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081014220357.64266be8@werewolf.home>
Date: Tue, 14 Oct 2008 22:03:57 +0200
From: "J.A. Magallón" <jamagallon@....com>
To: Linux-Kernel <linux-kernel@...r.kernel.org>
Subject: Re: Linux 2.6.27-git3: rtl8169 oops and wireless missing symbols
On Tue, 14 Oct 2008 21:33:16 +0200, Francois Romieu <romieu@...zoreil.com> wrote:
> J.A. Magallón <jamagallon@....com> :
> [...]
> > Oct 14 02:27:45 one kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> > Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: setting latency timer to 64
> > Oct 14 02:27:45 one kernel: eth0: RTL8102e at 0xdfffe000, 00:00:00:00:00:00, XID 24a00000 IRQ 219
>
> The MAC address does not look sane. Does the revert below cure it ?
>
> diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
> index c821da2..5b8f8ba 100644
> --- a/drivers/net/r8169.c
> +++ b/drivers/net/r8169.c
> @@ -1911,74 +1911,6 @@ static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
> }
> }
>
> -static int rtl_eeprom_read(struct pci_dev *pdev, int cap, int addr, __le32 *val)
> -{
> - int ret, count = 100;
> - u16 status = 0;
> - u32 value;
> -
> - ret = pci_write_config_word(pdev, cap + PCI_VPD_ADDR, addr);
> - if (ret < 0)
> - return ret;
> -
> - do {
> - udelay(10);
> - ret = pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &status);
> - if (ret < 0)
> - return ret;
> - } while (!(status & PCI_VPD_ADDR_F) && --count);
> -
> - if (!(status & PCI_VPD_ADDR_F))
> - return -ETIMEDOUT;
> -
> - ret = pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &value);
> - if (ret < 0)
> - return ret;
> -
> - *val = cpu_to_le32(value);
> -
> - return 0;
> -}
> -
> -static void rtl_init_mac_address(struct rtl8169_private *tp,
> - void __iomem *ioaddr)
> -{
> - struct pci_dev *pdev = tp->pci_dev;
> - u8 cfg1;
> - int vpd_cap;
> - u8 mac[8];
> - DECLARE_MAC_BUF(buf);
> -
> - cfg1 = RTL_R8(Config1);
> - if (!(cfg1 & VPD)) {
> - dprintk("VPD access not enabled, enabling\n");
> - RTL_W8(Cfg9346, Cfg9346_Unlock);
> - RTL_W8(Config1, cfg1 | VPD);
> - RTL_W8(Cfg9346, Cfg9346_Lock);
> - }
> -
> - vpd_cap = pci_find_capability(pdev, PCI_CAP_ID_VPD);
> - if (!vpd_cap)
> - return;
> -
> - /* MAC address is stored in EEPROM at offset 0x0e
> - * Realtek says: "The VPD address does not have to be a DWORD-aligned
> - * address as defined in the PCI 2.2 Specifications, but the VPD data
> - * is always consecutive 4-byte data starting from the VPD address
> - * specified."
> - */
> - if (rtl_eeprom_read(pdev, vpd_cap, 0x000e, (__le32*)&mac[0]) < 0 ||
> - rtl_eeprom_read(pdev, vpd_cap, 0x0012, (__le32*)&mac[4]) < 0) {
> - dprintk("Reading MAC address from EEPROM failed\n");
> - return;
> - }
> -
> - dprintk("MAC address found in EEPROM: %s\n", print_mac(buf, mac));
> -
> - /* Write MAC address */
> - rtl_rar_set(tp, mac);
> -}
> -
> static int __devinit
> rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> @@ -2156,8 +2088,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> tp->mmio_addr = ioaddr;
>
> - rtl_init_mac_address(tp, ioaddr);
> -
> /* Get MAC address */
> for (i = 0; i < MAC_ADDR_LEN; i++)
> dev->dev_addr[i] = RTL_R8(MAC0 + i);
Yes. I have updated to git4, and it works with this patch.
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2009.0 (Cooker) for i586
Linux 2.6.25-jam18 (gcc 4.3.1 20080626 (GCC) #1 SMP
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists