2.6.26-stable review patch. If anyone has any objections, please let us know. ------------------ From: Jean Delvare based on commit 98dd22c3e086d76058083432d4d8fb85f04bab90 upstream On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/it87.c | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -46,6 +46,8 @@ #include #include #include +#include +#include #include #define DRVNAME "it87" @@ -235,6 +237,8 @@ struct it87_sio_data { enum chips type; /* Values read from Super-I/O config space */ u8 vid_value; + /* Values set based on DMI strings */ + u8 skip_pwm; }; /* For each registered chip, we need to keep some data in memory. @@ -952,6 +956,7 @@ static int __init it87_find(unsigned sho { int err = -ENODEV; u16 chip_type; + const char *board_vendor, *board_name; superio_enter(); chip_type = force_id ? force_id : superio_inw(DEVID); @@ -1009,6 +1014,25 @@ static int __init it87_find(unsigned sho pr_info("it87: in7 is VCCH (+5V Stand-By)\n"); } + sio_data->skip_pwm = 0; + /* Disable specific features based on DMI strings */ + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + if (board_vendor && board_name) { + if (strcmp(board_vendor, "nVIDIA") == 0 + && strcmp(board_name, "FN68PT") == 0) { + /* On the Shuttle SN68PT, FAN_CTL2 is apparently not + connected to a fan, but to something else. One user + has reported instant system power-off when changing + the PWM2 duty cycle, so we disable it. + I use the board name string as the trigger in case + the same board is ever used in other systems. */ + pr_info("it87: Disabling pwm2 due to " + "hardware constraints\n"); + sio_data->skip_pwm = (1 << 1); + } + } + exit: superio_exit(); return err; @@ -1157,22 +1181,25 @@ static int __devinit it87_probe(struct p if ((err = device_create_file(dev, &sensor_dev_attr_pwm1_enable.dev_attr)) || (err = device_create_file(dev, - &sensor_dev_attr_pwm2_enable.dev_attr)) - || (err = device_create_file(dev, &sensor_dev_attr_pwm3_enable.dev_attr)) || (err = device_create_file(dev, &sensor_dev_attr_pwm1.dev_attr)) || (err = device_create_file(dev, - &sensor_dev_attr_pwm2.dev_attr)) - || (err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr)) || (err = device_create_file(dev, &dev_attr_pwm1_freq)) || (err = device_create_file(dev, - &dev_attr_pwm2_freq)) - || (err = device_create_file(dev, &dev_attr_pwm3_freq))) goto ERROR4; + if (!(sio_data->skip_pwm & (1 << 1))) { + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2.dev_attr)) + || (err = device_create_file(dev, + &dev_attr_pwm2_freq))) + goto ERROR4; + } } if (data->type == it8712 || data->type == it8716 -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/