BIOS EBDA/lowmem at: 0009e800/0009e800 Initializing cgroup subsys cpuset Linux version 2.6.27-rc7-tip (localuser@localhost) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #2 SMP Mon Sep 22 21:59:13 PDT 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f590000 (usable) BIOS-e820: 000000003f590000 - 000000003f5e3000 (ACPI NVS) BIOS-e820: 000000003f5e3000 - 000000003f5f0000 (ACPI data) BIOS-e820: 000000003f5f0000 - 000000003f600000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) last_pfn = 0x3f590 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37d56000 - 37fef36d Allocated new RAMDISK: 00100000 - 0039936d Move RAMDISK from 0000000037d56000 - 0000000037fef36c to 00100000 - 0039936c DMI 2.5 present. ACPI: RSDP 000F97A0, 0024 (r2 DELL ) ACPI: XSDT 3F5E3080, 005C (r1 DELL FX09 42302E31 AWRD 0) ACPI: FACP 3F5E7200, 00F4 (r3 DELL FX09 42302E31 AWRD 0) ACPI: DSDT 3F5E3200, 3FFC (r1 DELL AWRDACPI 1000 MSFT 3000000) ACPI: FACS 3F590000, 0040 ACPI: HPET 3F5E73C0, 0038 (r1 DELL FX09 42302E31 AWRD 98) ACPI: MCFG 3F5E7400, 003C (r1 DELL FX09 42302E31 AWRD 0) ACPI: SLIC 3F5E7440, 0176 (r1 DELL FX09 42302E31 AWRD 0) ACPI: DMY2 3F5E75C0, 0080 (r1 DELL FX09 42302E31 AWRD 0) ACPI: APIC 3F5E7300, 0084 (r1 DELL FX09 42302E31 AWRD 0) ACPI: SSDT 3F5E7CA0, 0380 (r1 PmRef CpuPm 3000 INTL 20041203) 129MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000085fb0c] TEXT DATA BSS ==> [0000400000 - 000085fb0c] #4 [0000860000 - 0000864000] INIT_PG_TABLE ==> [0000860000 - 0000864000] #5 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000100000 - 000039936d] NEW RAMDISK ==> [0000100000 - 000039936d] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003f590 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x0003f590 On node 0 totalpages: 259374 free_area_init_node: node 0, pgdat c073ba80, node_mem_map c1000000 DMA zone: 3966 pages, LIFO batch:0 Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 32910 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 I/O APIC #4 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3f600000:a0a00000) dyn_array irq_2_pin_head+0x0/0xc80 size:0xc nr:256 align:0x1000 dyn_array irq_cfgx+0x0/0x4 size:0x1c nr:32 align:0x1000 dyn_array sparse_irqs+0x0/0x4 size:0x80 nr:32 align:0x1000 dyn_array total_size: 0x3000 dyn_array irq_2_pin_head+0x0/0xc80 ==> [0x17f5000 - 0x17f5c00] dyn_array irq_cfgx+0x0/0x4 ==> [0x17f6000 - 0x17f6380] dyn_array sparse_irqs+0x0/0x4 ==> [0x17f7000 - 0x17f8000] kstat_irqs ==> [0x17f8000 - 0x17f8200] PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257346 Kernel command line: ro root=UUID=6a554e8a-e505-4063-9191-b5fe173a644c noapic Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07c1000 soft=c07a1000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2194.539 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1020804k/1037888k available (2243k kernel code, 16360k reserved, 1129k data, 308k init, 132680k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0751000 - 0xc079e000 ( 308 kB) .data : 0xc0630d6b - 0xc074b4a0 (1129 kB) .text : 0xc0400000 - 0xc0630d6b (2243 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.07 BogoMIPS (lpj=2194539) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0e38) CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d CPU 1 irqstacks, hard=c07c2000 soft=c07a2000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194392) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8777.86 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 832 bytes Booting paravirtualized kernel on bare hardware Time: 1:12:43 Date: 10/19/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [fdf7fffffdf00000, 10000003c] PCI: 0000:00:02.0 reg 14 io port: [ff070000ff00, 10000003c] PCI: 0000:00:02.0 reg 18 32bit mmio: [dfffffffd0000000, 10000003c] PCI: 0000:00:02.0 reg 1c 32bit mmio: [fdbffffffdb00000, 10000003c] PCI: 0000:00:19.0 reg 10 32bit mmio: [fdfdfffffdfc0000, 10000003c] PCI: 0000:00:19.0 reg 14 32bit mmio: [fdfffffffdfff000, 10000003c] PCI: 0000:00:19.0 reg 18 io port: [fe1f0000fe00, 10000003c] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [fd1f0000fd00, 10000003c] PCI: 0000:00:1a.1 reg 20 io port: [fc1f0000fc00, 10000003c] PCI: 0000:00:1a.2 reg 20 io port: [fb1f0000fb00, 10000003c] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fdffe3fffdffe000, 10000003c] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdff7ffffdff4000, 10000003c] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [fa1f0000fa00, 10000003c] PCI: 0000:00:1d.1 reg 20 io port: [f91f0000f900, 10000003c] PCI: 0000:00:1d.2 reg 20 io port: [f81f0000f800, 10000003c] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdffd3fffdffd000, 10000003c] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [f7070000f700, 10000003c] PCI: 0000:00:1f.2 reg 14 io port: [f6030000f600, 10000003c] PCI: 0000:00:1f.2 reg 18 io port: [f5070000f500, 10000003c] PCI: 0000:00:1f.2 reg 1c io port: [f4030000f400, 10000003c] PCI: 0000:00:1f.2 reg 20 io port: [f30f0000f300, 10000003c] PCI: 0000:00:1f.2 reg 24 io port: [f20f0000f200, 10000003c] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fdffc0fffdffc000, 10000003c] PCI: 0000:00:1f.3 reg 20 io port: [51f00000500, 10000003c] PCI: 0000:00:1f.5 reg 10 io port: [f0070000f000, 10000003c] PCI: 0000:00:1f.5 reg 14 io port: [ef030000ef00, 10000003c] PCI: 0000:00:1f.5 reg 18 io port: [ee070000ee00, 10000003c] PCI: 0000:00:1f.5 reg 1c io port: [ed030000ed00, 10000003c] PCI: 0000:00:1f.5 reg 20 io port: [ec0f0000ec00, 10000003c] PCI: 0000:00:1f.5 reg 24 io port: [eb0f0000eb00, 10000003c] PCI: bridge 0000:00:01.0 io port: [cfff0000c000, f6ca2a00f6cfa25c] PCI: bridge 0000:00:01.0 32bit mmio: [fdeffffffde00000, f6ca2a00f6cfa25c] PCI: bridge 0000:00:01.0 64bit mmio pref: [fdaffffffda00000, f6ca2a00f6cfa25c] PCI: 0000:02:01.0 reg 10 io port: [deff0000de00, 10000003c] PCI: 0000:02:01.0 reg 14 32bit mmio: [fddff0fffddff000, 10000003c] PCI: 0000:02:01.0 reg 30 32bit mmio: [1ffff00000000, 10000003c] pci 0000:02:01.0: supports D1 pci 0000:02:01.0: supports D2 pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [dfff0000d000, f6ca2c00f6cfd25c] PCI: bridge 0000:00:1e.0 32bit mmio: [fddffffffdd00000, f6ca2c00f6cfd25c] PCI: bridge 0000:00:1e.0 64bit mmio pref: [fdcffffffdc00000, f6ca2c00f6cfd25c] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter ACPI: RTC can wake from S4 system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x297 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:08: ioport range 0x400-0x4bf could not be reserved system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0b: iomem range 0xf0000-0xfffff could not be reserved system 00:0b: iomem range 0x3f600000-0x3f6fffff has been reserved system 00:0b: iomem range 0xfed00000-0xfed000ff could not be reserved system 00:0b: iomem range 0x3f590000-0x3f5fffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0x3f58ffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfed14000-0xfed1dfff could not be reserved system 00:0b: iomem range 0xfed20000-0xfed9ffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:01.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1e.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [c000, cfff] bus: 01 index 1 mmio: [fde00000, fdefffff] bus: 01 index 2 mmio: [fda00000, fdafffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [d000, dfff] bus: 02 index 1 mmio: [fdd00000, fddfffff] bus: 02 index 2 mmio: [fdc00000, fdcfffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2660k freed pci 0000:00:02.0: Boot video device input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1224378763.274:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1740 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: SSDT 3F5E7680, 026C (r1 PmRef Cpu0Ist 3000 INTL 20041203) processor ACPI0007:00: registered as cooling_device1 ACPI: SSDT 3F5E7B40, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203) processor ACPI0007:01: registered as cooling_device2 isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G33 Chipset agpgart-intel 0000:00:00.0: detected 7164K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 12:721:205 Freeing unused kernel memory: 308k freed Write protecting the kernel text: 2244k Write protecting the kernel read-only data: 952k ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 9, io mem 0xfdffe000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc7-tip ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 4 (level, low) -> IRQ 4 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 4, io mem 0xfdffd000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc7-tip ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 5, io base 0x0000fd00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 11, io base 0x0000fc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:1a.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 11, io base 0x0000fb00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 4 (level, low) -> IRQ 4 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 4, io base 0x0000fa00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000f900 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000f800 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27-rc7-tip uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 irq 11: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.27-rc7-tip #2 [] __report_bad_irq+0x2e/0x6f [] note_interrupt+0xe7/0x13e [] handle_level_irq+0x8f/0xc4 [] ? handle_level_irq+0x0/0xc4 [] do_IRQ+0xab/0xd1 [] common_interrupt+0x23/0x28 [] ? run_timer_softirq+0x1a1/0x1b1 [] __do_softirq+0x79/0xe7 [] ? __do_softirq+0x0/0xe7 [] do_softirq+0x72/0xb2 [] irq_exit+0x38/0x6d [] smp_apic_timer_interrupt+0x71/0x7f [] apic_timer_interrupt+0x28/0x30 [] ? mwait_idle+0x32/0x40 [] cpu_idle+0x74/0x8f [] rest_init+0x4e/0x50 ======================= handlers: [] (usb_hcd_irq+0x0/0x7c) [] (usb_hcd_irq+0x0/0x7c) [] (usb_hcd_irq+0x0/0x7c) Disabling IRQ #11 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. pata_acpi 0000:00:1f.2: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT A disabled pata_acpi 0000:00:1f.5: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 pata_acpi 0000:00:1f.5: setting latency timer to 64 pata_acpi 0000:00:1f.5: PCI INT A disabled usb 4-1: configuration #1 chosen from 1 choice input: HID 413c:3010 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3 input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1a.1-1 usb 4-1: New USB device found, idVendor=413c, idProduct=3010 usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1 usb 6-1: New USB device found, idVendor=413c, idProduct=2003 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Dell USB Keyboard usb 6-1: Manufacturer: Dell ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 11 ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 11 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST31000340AS, SD35, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: NODEV after polling detection ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, D600, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD35 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B D600 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 11 ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 11 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1224378772.921:2): selinux=0 auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 eth0: RTL8169sb/8110sb at 0xf7da0000, 00:14:d1:16:97:57, XID 10000000 IRQ 5 udev: renamed network interface eth0 to eth2 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNK0] -> GSI 3 (level, low) -> IRQ 3 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 987988k swap on /dev/sda3. Priority:-1 extents:1 across:987988k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 set status page addr 0x00033000 r8169: eth2: link up r8169: eth2: link up eth2: no IPv6 routers present