[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <48FDED5E.5080605@mimc.co.uk>
Date: Tue, 21 Oct 2008 15:55:26 +0100
From: Mark Jackson <mpfj@...c.co.uk>
To: ben-linux@...ff.org, akpm@...ux-foundation.org
CC: i2c@...sensors.org, lkml <linux-kernel@...r.kernel.org>
Subject: [PATCH v2] Add support for Dallas DS28CM00 Unique ID chip
This patch adds support for the (I2C based) DS28CM00 ID chip.
(v2 after running through checkpatch)
Signed-off-by: M.Jackson <mpfj@...c.co.uk>
---
drivers/i2c/chips/Kconfig | 7 ++
drivers/i2c/chips/Makefile | 1 +
drivers/i2c/chips/ds28cm00.c | 166 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 174 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a95cb94..98c06e7 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -172,4 +172,11 @@ config MENELAUS
and other features that are often used in portable devices like
cell phones and PDAs.
+config DS28CM00
+ tristate "DS28CM00 Serial Number chip"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for the Dallas DS28CM00
+ Serial Number chip.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 39e3e69..f674d94 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
+obj-$(CONFIG_DS28CM00) += ds28cm00.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds28cm00.c b/drivers/i2c/chips/ds28cm00.c
new file mode 100644
index 0000000..6abe065
--- /dev/null
+++ b/drivers/i2c/chips/ds28cm00.c
@@ -0,0 +1,166 @@
+/*
+ ds28cm00.c - driver for DS28CM00 Serial ID chip
+
+ Copyright (C) 2008 Mark Jackson <mpfj@...c.co.uk>
+
+ Based on i2c/chips/max6875.c
+
+ The DS28CM00 contains a 64bit unique number.
+ The memory map is defined as follows:
+ * 0x00 = Device Family Code (0x70)
+ * 0x01 - 0x06 = Serial Number (bits 0 to 47)
+ * 0x07 = CRC of addresses 0x00 to 0x06
+ * 0x08 = Control Register (R/W)
+
+ This driver makes the Serial Number available for read.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+*/
+
+#include <linux/i2c.h>
+
+static unsigned short normal_i2c[] = {I2C_CLIENT_END};
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(ds28cm00);
+
+#define DS28CM00_CMD_WRITE 0x50
+#define DS28CM00_CMD_READ 0x51
+
+#define ID_SIZE 9
+
+/* Each client has this additional data */
+struct ds28cm00_data {
+ struct i2c_client client;
+ struct mutex update_lock;
+};
+
+static int ds28cm00_attach_adapter(struct i2c_adapter *adapter);
+static int ds28cm00_detect(struct i2c_adapter *adapter, int address, int kind);
+static int ds28cm00_detach_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ds28cm00_driver = {
+ .driver = {
+ .name = "ds28cm00",
+ },
+ .attach_adapter = ds28cm00_attach_adapter,
+ .detach_client = ds28cm00_detach_client,
+};
+
+static ssize_t ds28cm00_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+ if (off > ID_SIZE)
+ return 0;
+
+ if (off + count > ID_SIZE)
+ count = ID_SIZE - off;
+
+ if (i2c_smbus_read_i2c_block_data(client, DS28CM00_CMD_READ, count, buf) != count)
+ return 0;
+
+ return count;
+}
+
+static struct bin_attribute id_attr = {
+ .attr = {
+ .name = "id",
+ .mode = S_IRUGO,
+ },
+ .size = ID_SIZE,
+ .read = ds28cm00_read,
+};
+
+static int ds28cm00_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, ds28cm00_detect);
+}
+
+/* This function is called by i2c_probe */
+static int ds28cm00_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct ds28cm00_data *data;
+ int err = 0;
+
+ printk(KERN_DEBUG "DS28CM00 I2C Serial Number driver\n");
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ printk(KERN_ALERT "DS28CM00 : failed i2c_check_func()\n");
+ return 0;
+ }
+
+ data = kzalloc(sizeof(struct ds28cm00_data), GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ALERT "DS28CM00 : failed kzalloc()\n");
+ return -ENOMEM;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &ds28cm00_driver;
+ new_client->flags = 0;
+ strlcpy(new_client->name, "ds28cm00", I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ err = i2c_attach_client(new_client);
+ if (err) {
+ printk(KERN_ALERT "DS28CM00 : failed i2c_attach_client()\n");
+ goto exit_kfree;
+ }
+
+ /* Register sysfs hooks */
+ err = sysfs_create_bin_file(&new_client->dev.kobj, &id_attr);
+ if (err) {
+ printk(KERN_ALERT "DS28CM00 : failed sysfs_create_bin_file()\n");
+ goto exit_detach;
+ }
+
+ return 0;
+
+exit_detach:
+ i2c_detach_client(new_client);
+exit_kfree:
+ kfree(data);
+ return err;
+}
+
+static int ds28cm00_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ sysfs_remove_bin_file(&client->dev.kobj, &id_attr);
+
+ err = i2c_detach_client(client);
+ if (err)
+ return err;
+
+ kfree(client);
+
+ return 0;
+}
+
+static int __init ds28cm00_init(void)
+{
+ return i2c_add_driver(&ds28cm00_driver);
+}
+
+static void __exit ds28cm00_exit(void)
+{
+ i2c_del_driver(&ds28cm00_driver);
+}
+
+MODULE_AUTHOR("Mark Jackson <mpfj@...c.co.uk>");
+MODULE_DESCRIPTION("DS28CM00 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds28cm00_init);
+module_exit(ds28cm00_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists