| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <48FD7E6D.9070302@gmail.com>
Date: Tue, 21 Oct 2008 09:02:05 +0200
From: Thibaut BOYER <tboyer.dev@...il.com>
To: LKML <linux-kernel@...r.kernel.org>
Subject: rt_down / rt_down_timeout troubles & bug
Hi,
I'm using Preempt_rt (2.6.25.2-rt9) and it seems rt_down/rt_down_timeout have a bad behaviour...
Each time I'm doing an insmod with my driver I got the same Oops.
For example with this code :
DPRLIBLOGMSG("before rt_down\");
rt_down(&p->sem_config_conf);
do {
DPRLIBLOGMSG("test ok\n");
} while(1);
The dmesg stops *before rt_down* and nothing more happens.
And with this code :
DPRLIBLOGMSG("before rt_down_timeout\");
rt_down_timeout(&p->sem_config_conf, local msecs_to_jiffies(1000));
do {
DPRLIBLOGMSG("test ok\n");
} while(1);
I got the following Oops right after *before **r**t_down_timeout* :
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<00000000>]
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: cp16xx(P) e100 mii
Pid: 5, comm: sirq-timer/0 Tainted: P (2.6.26.5-rt9-ipipe #2)
EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
EIP is at 0x0
EAX: dc11df0c EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: dc11df0c EDI: c0498e20 EBP: ddc29f58 ESP: ddc29f40
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 preempt:00000001
Process sirq-timer/0 (pid: 5, ti=ddc29000 task=ddc44d80 task.ti=ddc29000)
Stack: c0133e3a 00000000 c0498ea4 00000202 c050af80 fffffffd ddc29f6c c0134a38
c050af80 ddc29f6c 00000202 ddc29fa0 c0126452 00000001 00000002 c050aab0
ddc29f88 c013da9b ddc29fa0 00000046 00000002 00000002 c050aab0 fffffffd
Call Trace:
[<c0133e3a>] ? run_hrtimer_pending+0x5a/0x110
[<c0134a38>] ? hrtimer_run_pending+0x48/0xe0
[<c0126452>] ? run_timer_softirq+0x82/0x2c0
[<c013da9b>] ? trace_hardirqs_on+0xb/0x10
[<c012298d>] ? ksoftirqd+0x10d/0x230
[<c0122880>] ? ksoftirqd+0x0/0x230
[<c0130716>] ? kthread+0x46/0x80
[<c01306d0>] ? kthread+0x0/0x80
[<c0103cf3>] ? kernel_thread_helper+0x7/0x10
=======================
INFO: lockdep is turned off.
Code: Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:ddc29f40
---[ end trace ce167a848c96a955 ]---
Bellow, follows more lines of the dmesg.
Thanks for your help
TB
cp16xx_init: calls pci_module_init()
cp16xx_pci_probe: begin
cp16xx_init_pci: begin
cp16xx_init_pci: bar1 start=0xed040000 size=0x10000
cp16xx_init_pci: bar2 start=0xea800000 size=0x10000
cp16xx_init_pci: bar3 start=0xea000000 size=0x800000
cp16xx_init_pci: bar4 start=0xec000000 size=0x1000000
cp16xx_init_pci: bar5 start=0xe8000000 size=0x2000000
cp16xx_init_pci: virtual address register_bar_ptr 0xde980000
cp16xx_init_pci: virtual address dpram_bar_ptr 0xdf200000
cp16xx_init_pci: virtual address dpram_config_area_ptr 0xdf300000
cp16xx_init_pci: swi_version=0x20051600(must be 0x2005xxxx)
cp16xx_init_pci: got PNIO phys 13510000, virt d3510000, size 0x10000
cp16xx_init_pci: got TRACE phys 134ec000, virt d34ec000, size 0x408
cp16xx_l2_get_dma_pool: l2eth_dma_page_order=7, pages = log2N =128
cp16xx_l2_get_dma_pool: got L2 phys 00c00000, virt c0c00000, size 0x80000
cp16xx_init_pci: end
cp16xx_pci_probe: got major 253 allocated
cp16xx_dprlib_setup: begin
cp16xx_dprlib_setup: end
cp16xx_init_irq: begin
cp16xx_init_irq: request irq 18, card 0xde830000
cp16xx_init_irq: request irq 18 -> OK
cp16xx_init_irq: end
cp16xx_daemon_start: create new kernel thread
cp16xx_daemon: begin
cp16xx_daemon: start wait for FW to be ready
DPRLIB_start: ->DPRLIB_start
dprlib_init_dpram: -> init_dpram
dprlib_start_threads: -> start_thread
dprlib_start_all_tasks_and_semaphores: start
dprlib_start_all_tasks_and_semaphores: Semaphores are created, now
begin to create threads
dprlib_proc: start
dprlib_proc: wait
cp16xx_pci_probe: end
cp16xx_init: end
dprlib_start_all_tasks_and_semaphores: exit
dprlib_start_threads: start_thread <-
dprlib_trigger_intr: IRQ Host->FW, C=0xa5a070a0, M=0xa5a07777, MRC=0xa5a07777
dprlib_init_dpram: wait till config interrupt comes from FW (init_dpram)
dprlib_proc: wait END
dprlib_config_proc: start
dprlib_config_proc: exit
dprlib_proc: wait
dprlib_init_dpram: interrupt coming from FW (init_dpram)
dprlib_init_dpram: Driver version 0x79, FW version 0x71
dprlib_init_channels: -> init_channels
dprlib_init_channels: before rt_down_timeout
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<00000000>]
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: cp16xx(P) e100 mii
Pid: 5, comm: sirq-timer/0 Tainted: P (2.6.26.5-rt9-ipipe #2)
EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
EIP is at 0x0
EAX: dc11df0c EBX: 00000000 ECX: 00000001 EDX: 00000000
ESI: dc11df0c EDI: c0498e20 EBP: ddc29f58 ESP: ddc29f40
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 preempt:00000001
Process sirq-timer/0 (pid: 5, ti=ddc29000 task=ddc44d80 task.ti=ddc29000)
Stack: c0133e3a 00000000 c0498ea4 00000202 c050af80 fffffffd ddc29f6c c0134a38
c050af80 ddc29f6c 00000202 ddc29fa0 c0126452 00000001 00000002 c050aab0
ddc29f88 c013da9b ddc29fa0 00000046 00000002 00000002 c050aab0 fffffffd
Call Trace:
[<c0133e3a>] ? run_hrtimer_pending+0x5a/0x110
[<c0134a38>] ? hrtimer_run_pending+0x48/0xe0
[<c0126452>] ? run_timer_softirq+0x82/0x2c0
[<c013da9b>] ? trace_hardirqs_on+0xb/0x10
[<c012298d>] ? ksoftirqd+0x10d/0x230
[<c0122880>] ? ksoftirqd+0x0/0x230
[<c0130716>] ? kthread+0x46/0x80
[<c01306d0>] ? kthread+0x0/0x80
[<c0103cf3>] ? kernel_thread_helper+0x7/0x10
=======================
INFO: lockdep is turned off.
Code: Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:ddc29f40
---[ end trace ce167a848c96a955 ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists