| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Oct 2008 13:43:02 +0200
From: Pavel Machek <pavel@...e.cz>
To: Pekka J Enberg <penberg@...helsinki.fi>
Cc: Greg Kroah-Hartman <greg@...ah.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/6] w35und: wb35_probe() cleanup
> From: Pekka Enberg <penberg@...helsinki.fi>
>
> Fix error handling in wb35_probe() function and clean it up a bit.
>
> Cc: Pavel Machek <pavel@...e.cz>
> Signed-off-by: Pekka Enberg <penberg@...helsinki.fi>
ACK. And thanks for the series!
Pavel
> ---
> drivers/staging/winbond/linux/wbusb.c | 101 +++++++++++++++------------------
> 1 files changed, 45 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c
> index 9f1064d..b4be0d8 100644
> --- a/drivers/staging/winbond/linux/wbusb.c
> +++ b/drivers/staging/winbond/linux/wbusb.c
> @@ -181,26 +181,32 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
> PWBUSB pWbUsb;
> struct usb_host_interface *interface;
> struct usb_endpoint_descriptor *endpoint;
> - int ret = -1;
> u32 ltmp;
> struct usb_device *udev = interface_to_usbdev(intf);
> + struct wbsoft_priv *priv;
> + struct ieee80211_hw *dev;
> + int err;
>
> usb_get_dev(udev);
>
> - printk("[w35und]wb35_probe ->\n");
> -
> // 20060630.2 Check the device if it already be opened
> - ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
> + err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
> 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
> 0x0, 0x400, <mp, 4, HZ*100 );
> - if (ret < 0)
> + if (err)
> goto error;
>
> ltmp = cpu_to_le32(ltmp);
> - if (ltmp) // Is already initialized?
> + if (ltmp) { // Is already initialized?
> + err = -EBUSY;
> goto error;
> + }
>
> adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
> + if (!adapter) {
> + err = -ENOMEM;
> + goto error;
> + }
>
> my_adapter = adapter;
> pWbUsb = &adapter->sHwData.WbUsb;
> @@ -215,70 +221,53 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
> }
>
> if (!WbWLanInitialize(adapter)) {
> - printk("[w35und]WbWLanInitialize fail\n");
> - goto error;
> + err = -EINVAL;
> + goto error_free_adapter;
> }
>
> - {
> - struct wbsoft_priv *priv;
> - struct ieee80211_hw *dev;
> - int res;
> -
> - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
> -
> - if (!dev) {
> - printk("w35und: ieee80211 alloc failed\n" );
> - BUG();
> - }
> + dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
> + if (!dev)
> + goto error_free_adapter;
>
> - my_dev = dev;
> + my_dev = dev;
>
> - SET_IEEE80211_DEV(dev, &udev->dev);
> - {
> - phw_data_t pHwData = &adapter->sHwData;
> - unsigned char dev_addr[MAX_ADDR_LEN];
> - hal_get_permanent_address(pHwData, dev_addr);
> - SET_IEEE80211_PERM_ADDR(dev, dev_addr);
> - }
> -
> -
> - dev->extra_tx_headroom = 12; /* FIXME */
> - dev->flags = 0;
> -
> - dev->channel_change_time = 1000;
> -// dev->max_rssi = 100;
> + SET_IEEE80211_DEV(dev, &udev->dev);
> + {
> + phw_data_t pHwData = &adapter->sHwData;
> + unsigned char dev_addr[MAX_ADDR_LEN];
> + hal_get_permanent_address(pHwData, dev_addr);
> + SET_IEEE80211_PERM_ADDR(dev, dev_addr);
> + }
>
> - dev->queues = 1;
> + dev->extra_tx_headroom = 12; /* FIXME */
> + dev->flags = 0;
>
> - static struct ieee80211_supported_band band;
> + dev->channel_change_time = 1000;
> + dev->queues = 1;
>
> - band.channels = wbsoft_channels;
> - band.n_channels = ARRAY_SIZE(wbsoft_channels);
> - band.bitrates = wbsoft_rates;
> - band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
> + static struct ieee80211_supported_band band;
>
> - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
> -#if 0
> - wbsoft_modes[0].num_channels = 1;
> - wbsoft_modes[0].channels = wbsoft_channels;
> - wbsoft_modes[0].mode = MODE_IEEE80211B;
> - wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
> - wbsoft_modes[0].rates = wbsoft_rates;
> + band.channels = wbsoft_channels;
> + band.n_channels = ARRAY_SIZE(wbsoft_channels);
> + band.bitrates = wbsoft_rates;
> + band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
>
> - res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
> - BUG_ON(res);
> -#endif
> + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
>
> - res = ieee80211_register_hw(dev);
> - BUG_ON(res);
> - }
> + err = ieee80211_register_hw(dev);
> + if (err)
> + goto error_free_hw;
>
> - usb_set_intfdata( intf, adapter );
> + usb_set_intfdata(intf, adapter);
>
> - printk("[w35und] _probe OK\n");
> return 0;
> +
> +error_free_hw:
> + ieee80211_free_hw(dev);
> +error_free_adapter:
> + kfree(adapter);
> error:
> - return -ENOMEM;
> + return err;
> }
>
> void packet_came(char *pRxBufferAddress, int PacketSize)
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists