BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fffa000 (usable) BIOS-e820: 000000007fffa000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) last_pfn = 0x7fffa max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 DMI 2.3 present. ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ) ACPI: RSDT 7FFFA000, 0030 (r1 COMPAQ P29 2 Ò 162E) ACPI: FACP 7FFFA040, 0074 (r1 COMPAQ P29 2 Ò 162E) ACPI: DSDT 7FFFA240, 3E50 (r1 COMPAQ DSDT 1 MSFT 100000B) ACPI: FACS 7FFFA0C0, 0040 ACPI: APIC 7FFFA100, 00AC (r1 COMPAQ 00000083 2 0) ACPI: SPCR 7FFFA1C0, 0050 (r1 COMPAQ SPCRRBSU 1 Ò 162E) 1151MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00009000 - 00010000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00005e3ff0] TEXT DATA BSS ==> [0000100000 - 00005e3ff0] #4 [00005e4000 - 00005ec000] INIT_PG_TABLE ==> [00005e4000 - 00005ec000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f4fd0] 000f4fd0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007fffa Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fffa On node 0 totalpages: 524185 free_area_init_node: node 0, pgdat c051e680, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 292602 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x920 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48]) IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI 48-63 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 4 I/O APICs Using ACPI (MADT) for SMP configuration information mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec01000) mapped IOAPIC to ffff8000 (fec02000) mapped IOAPIC to ffff7000 (fec03000) Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) PERCPU: Allocating 39836 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520089 Kernel command line: auto BOOT_IMAGE=Linux ro root=6801 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0585000 soft=c057d000 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2392.840 MHz processor. Console: colour VGA+ 80x50 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2073508k/2097128k available (2844k kernel code, 22436k reserved, 1451k data, 264k init, 1179624k highmem) virtual kernel memory layout: fixmap : 0xfff52000 - 0xfffff000 ( 692 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0538000 - 0xc057a000 ( 264 kB) .data : 0xc03c73e3 - 0xc0532150 (1451 kB) .text : 0xc0100000 - 0xc03c73e3 (2844 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.68 BogoMIPS (lpj=9571360) Security Framework initialized Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. Freeing SMP alternatives: 13k freed ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 CPU 1 irqstacks, hard=c0586000 soft=c057e000 Booting processor 1/6 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4786.19 BogoMIPS (lpj=9572385) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. CPU 2 irqstacks, hard=c0587000 soft=c057f000 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4786.10 BogoMIPS (lpj=9572211) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#2]: passed. CPU 3 irqstacks, hard=c0588000 soft=c0580000 Booting processor 3/7 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4786.21 BogoMIPS (lpj=9572434) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (19144.19 BogoMIPS). net_namespace: 596 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: HP ProLiant DL380 detected, enabling pci=bfsort. mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:03.0 reg 10 32bit mmio: [f6000000, f6ffffff] PCI: 0000:00:03.0 reg 14 io port: [2400, 24ff] PCI: 0000:00:03.0 reg 18 32bit mmio: [f5ff0000, f5ff0fff] PCI: 0000:00:03.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:00:03.0: supports D1 pci 0000:00:03.0: supports D2 PCI: 0000:00:04.0 reg 10 io port: [1800, 18ff] PCI: 0000:00:04.0 reg 14 32bit mmio: [f5fe0000, f5fe01ff] PCI: 0000:00:04.2 reg 10 io port: [2800, 28ff] PCI: 0000:00:04.2 reg 14 32bit mmio: [f5fd0000, f5fd07ff] PCI: 0000:00:04.2 reg 18 32bit mmio: [f5fc0000, f5fc1fff] PCI: 0000:00:04.2 reg 1c 32bit mmio: [f5f00000, f5f7ffff] PCI: 0000:00:04.2 reg 30 32bit mmio: [0, ffff] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold pci 0000:00:04.2: PME# disabled PCI: 0000:00:0f.1 reg 10 io port: [1f0, 1f7] PCI: 0000:00:0f.1 reg 14 io port: [3f4, 3f7] PCI: 0000:00:0f.1 reg 18 io port: [170, 177] PCI: 0000:00:0f.1 reg 1c io port: [374, 377] PCI: 0000:00:0f.1 reg 20 io port: [2000, 200f] PCI: 0000:00:0f.2 reg 10 32bit mmio: [f5ef0000, f5ef0fff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (0000:01) PCI: 0000:01:03.0 reg 10 64bit mmio: [f79c0000, f79fffff] PCI: 0000:01:03.0 reg 18 io port: [3000, 30ff] PCI: 0000:01:03.0 reg 1c 32bit mmio: [f78f0000, f78f3fff] PCI: 0000:01:03.0 reg 30 32bit mmio: [0, 3fff] pci 0000:01:03.0: supports D1 bus 01 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Root Bridge [PCI2] (0000:02) PCI: 0000:02:01.0 reg 10 64bit mmio: [f7af0000, f7afffff] PCI: 0000:02:01.0 reg 30 32bit mmio: [0, ffff] pci 0000:02:01.0: PME# supported from D3hot D3cold pci 0000:02:01.0: PME# disabled PCI: 0000:02:02.0 reg 10 64bit mmio: [f7ae0000, f7aeffff] PCI: 0000:02:02.0 reg 30 32bit mmio: [0, ffff] pci 0000:02:02.0: PME# supported from D3hot D3cold pci 0000:02:02.0: PME# disabled bus 02 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Root Bridge [PCI3] (0000:03) bus 03 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT] ACPI: PCI Root Bridge [PCI4] (0000:06) PCI: 0000:06:1e.0 reg 10 32bit mmio: [f7bf0000, f7bf0fff] PCI: 0000:07:04.0 reg 10 32bit mmio: [f7ff0000, f7ff0fff] PCI: 0000:07:04.0 reg 14 io port: [4000, 403f] PCI: 0000:07:04.0 reg 18 32bit mmio: [f7e00000, f7efffff] pci 0000:07:04.0: supports D1 pci 0000:07:04.0: supports D2 pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:04.0: PME# disabled PCI: 0000:07:05.0 reg 10 32bit mmio: [f7df0000, f7df0fff] PCI: 0000:07:05.0 reg 14 io port: [4040, 407f] PCI: 0000:07:05.0 reg 18 32bit mmio: [f7c00000, f7cfffff] pci 0000:07:05.0: supports D1 pci 0000:07:05.0: supports D2 pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:05.0: PME# disabled PCI: bridge 0000:06:01.0 io port: [4000, 4fff] PCI: bridge 0000:06:01.0 32bit mmio: [f7c00000, f7ffffff] bus 06 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT] ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 *7 10 11 15) ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3 ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15) ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 *15) ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 *11 15) ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 *7 10 11 15) ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 *11 15) ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 *10 11 15) ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 *15) ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: WMI: Mapper loaded Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x900-0x903 has been reserved system 00:01: ioport range 0x910-0x911 has been reserved system 00:01: ioport range 0x920-0x923 has been reserved system 00:01: ioport range 0x930-0x937 has been reserved system 00:01: ioport range 0x940-0x947 has been reserved system 00:01: ioport range 0x950-0x957 has been reserved system 00:01: ioport range 0xc06-0xc08 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc49-0xc4a has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6f has been reserved system 00:01: ioport range 0x230-0x233 has been reserved system 00:01: ioport range 0x260-0x267 has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x70f has been reserved system 00:01: ioport range 0x800-0x81f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved pci 0000:06:01.0: PCI bridge, secondary bus 0000:07 pci 0000:06:01.0: IO window: 0x4000-0x4fff pci 0000:06:01.0: MEM window: 0xf7c00000-0xf7ffffff pci 0000:06:01.0: PREFETCH window: disabled bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [0, ffff] bus: 01 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [0, ffff] bus: 02 index 1 mmio: [0, ffffffffffffffff] bus: 03 index 0 io port: [0, ffff] bus: 03 index 1 mmio: [0, ffffffffffffffff] bus: 06 index 0 io port: [0, ffff] bus: 06 index 1 mmio: [0, ffffffffffffffff] bus: 07 index 0 io port: [4000, 4fff] bus: 07 index 1 mmio: [f7c00000, f7ffffff] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. highmem bounce pool size: 64 pages SGI XFS with ACLs, security attributes, large block numbers, no debug enabled msgmni has been set to 1747 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:03.0: Boot video device pci 0000:07:04.0: Firmware left e100 interrupts enabled; disabling pci 0000:07:05.0: Firmware left e100 interrupts enabled; disabling input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:06: registered as cooling_device2 processor ACPI0007:07: registered as cooling_device3 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12ac Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded HP CISS Driver (v 3.6.20) cciss 0000:01:03.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 cciss0: <0xb178> at PCI 0000:01:03.0 IRQ 30 using DAC blocks= 71122560 block_size= 512 heads=255, sectors=32, cylinders=8716 blocks= 71122560 block_size= 512 heads=255, sectors=32, cylinders=8716 cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > blocks= 142253280 block_size= 512 heads=255, sectors=32, cylinders=17433 blocks= 142253280 block_size= 512 heads=255, sectors=32, cylinders=17433 cciss/c0d1: p1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Loading iSCSI transport class v2.0-870. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods scsi0 : pata_serverworks scsi1 : pata_serverworks ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0