lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <48FFAF0B.8070501@atmos.washington.edu>
Date:	Wed, 22 Oct 2008 15:54:03 -0700
From:	Harry Edmon <harry@...os.washington.edu>
To:	Trond Myklebust <trond.myklebust@....uio.no>
CC:	linux-kernel@...r.kernel.org
Subject: Re: SUNRPC problem with 2.6.26 and beyond

Then how do you explain the the large system time used with 2.6.26 and 
beyond?  Is it some other patch I should be looking at?

Trond Myklebust wrote:
> On Wed, 2008-10-22 at 08:35 -0700, Harry Edmon wrote:
>   
>> I have a dual quad-core Xeon system running software 
>> (http://www.unidata.ucar.edu/software/ldm) that relays and processes 
>> weather data through RPC calls, keeping a queue of data in a memory 
>> mapped file.  Up until 2.6.26 the system has run just fine (for example 
>> 2.6.25.17).  But starting with 2.6.26 through 2.6.27.2 the system runs 
>> into a problem after approximately 24 hours.  The symptom is that the 
>> processing slows down to a crawl.  Using "top" I can see that the System 
>> time is up over 90%, with almost no User and Wait time.  If I stop and 
>> restart the software, most of the time it gets better - but sometimes it 
>> takes a reboot to fix the problem.  I have an identical system that does 
>> just processing and ingesting data from remote systems, and it does not 
>> have this problem.  I have tried a number of different kernel 
>> configurations, but they all show the same problem.
>>
>> I suspect a problem with SUNRPC.  I notice that there were a large 
>> number of SUNRPC patches in 2.6.26.  I am looking for suggestions on how 
>> to pin down which patches are causing the problem.  Are there ways to 
>> figure where in the  kernel the time is being spent?  I am will to work 
>> on isolating the problem, but I need some suggestions on the best way to 
>> do it given the large number of SUNRPC patches in 2.6.26 and the fact 
>> that each experiment takes a day.
>>     
>
> The kernel sunrpc interface is not exported to user land: the glibc code
> uses its own, entirely separate implementation of sunrpc.
>
> I cannot therefore see, how your application's RPC calls can be affected
> by kernel sunrpc changes.
>
> Cheers
>   Trond
>
>   


-- 
 Dr. Harry Edmon			E-MAIL: harry@...os.washington.edu
 206-543-0547				harry@...hington.edu
 Dept of Atmospheric Sciences		FAX:	206-543-0308
 University of Washington, Box 351640, Seattle, WA 98195-1640

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ