| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <adaej28urfi.fsf@cisco.com> Date: Wed, 22 Oct 2008 16:43:29 -0700 From: Roland Dreier <rdreier@...co.com> To: linux-kernel@...r.kernel.org Cc: tglx@...utronix.de Subject: Hang early in boot with 2.6.27-git Latest git (head 2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4) hangs early in boot. One clue is that if I let it sit there for ~30 minutes, I get a message about the tsc being unstable... the last messages are: [ 2.255064] NET: Registered protocol family 2 [ 1528.453016] Clocksource tsc unstable (delta = 1499794012204 ns) Any requests for debugging info or suggestions appreciated... System is a dual-socket quad-core Xeon box. Full boot log below: [ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Linux version 2.6.27-dbg (rdreier@...and-1950-2) (gcc version 4.3.2 (Debian 4.3.2-1)8 [ 0.000000] Command line: root=/dev/sda1 ro console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) ▮ [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)────┘ [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.4 present.m Corporation [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff804D B5C04F474331 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] last_map_addr: cffa8000 end: cffa8000 [ 0.000000] init_memory_mapping [ 0.000000] last_map_addr: 230000000 end: 230000000 [ 0.000000] ACPI: RSDP 000F2900, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 000F2980, 004C (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: FACP 000F2A88, 00F4 (r3 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: DSDT CFFA8000, 2A90 (r1 DELL PE_SC3 1 MSFT 100000E) [ 0.000000] ACPI: FACS CFFB7C00, 0040 [ 0.000000] ACPI: APIC 000F2B7C, 00C8 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: SPCR 000F2C5D, 0050 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: HPET 000F2CAD, 0038 (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: MCFG 000F2CE5, 003C (r1 DELL PE_SC3 1 DELL 1) [ 0.000000] ACPI: DMI detected: Dell PE 1950 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000011000 - 0000000000056fff] pages 46 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000d4d508] TEXT DATA BSS ==> [0000200000 - 0000d4d508] [ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #5 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cffa8 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec81000, GSI 64-87 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044684 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 ro console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.062 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS0] enabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004000] ... MAX_LOCK_DEPTH: 48 [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004000] ... CLASSHASH_SIZE: 4096 [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.004000] ... CHAINHASH_SIZE: 8192 [ 0.004000] memory used by lock dependency info: 3839 kB [ 0.004000] per task-struct memory footprint: 1920 bytes [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 8127060k/9175040k available (2643k kernel code, 260812k reserved, 1686k data) [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.12 B) [ 0.013024] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.022443] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.026002] Mount-cache hash table entries: 256 [ 0.028909] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.033656] CPU: L2 cache: 4096K [ 0.036005] CPU 0/0x0 -> Node 0 [ 0.040004] CPU: Physical Processor ID: 0 [ 0.044003] CPU: Processor Core ID: 0 [ 0.047647] CPU0: Thermal monitoring enabled (TM1) [ 0.048004] using mwait in idle threads. [ 0.052012] Freeing SMP alternatives: 18k freed [ 0.056033] ACPI: Core revision 20080609 [ 0.066776] Setting APIC routing to flat [ 0.068397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.112782] CPU0: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.120001] lockdep: fixing up alternatives. [ 0.120080] Booting processor 1 APIC 0x4 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640028) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/0x4 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.217398] CPU1: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.225239] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.228574] lockdep: fixing up alternatives. [ 0.232029] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640008) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 2/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.329382] CPU2: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.337239] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.340598] lockdep: fixing up alternatives. [ 0.344040] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640025) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 3/0x5 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.441408] CPU3: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.449236] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.452537] lockdep: fixing up alternatives. [ 0.456029] Booting processor 4 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#4 [ 0.004000] Calibrating delay using timer specific routine.. 5319.99 BogoMIPS (lpj=10639996) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 4/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] CPU4: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.553451] CPU4: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.561239] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.564533] lockdep: fixing up alternatives. [ 0.568036] Booting processor 5 APIC 0x6 ip 0x6000 [ 0.004000] Initializing CPU#5 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640018) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 5/0x6 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] CPU5: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.665503] CPU5: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.673238] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.676537] lockdep: fixing up alternatives. [ 0.680032] Booting processor 6 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#6 [ 0.004000] Calibrating delay using timer specific routine.. 5319.98 BogoMIPS (lpj=10639975) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 6/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] CPU6: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.777455] CPU6: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.785239] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.788551] lockdep: fixing up alternatives. [ 0.792029] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.004000] Initializing CPU#7 [ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640024) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 7/0x7 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] CPU7: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.889418] CPU7: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz stepping 07 [ 0.897239] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.900016] Brought up 8 CPUs [ 0.902969] Total of 8 processors activated (42560.16 BogoMIPS). [ 0.904298] net_namespace: 1056 bytes [ 0.908506] NET: Registered protocol family 16 [ 0.916301] No dock devices found. [ 0.920167] ACPI: bus type pci registered [ 0.924022] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.932005] PCI: MCFG area at e0000000 reserved in E820 [ 0.952507] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.960005] PCI: Using configuration type 1 for base access [ 0.964005] PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. [ 0.984015] ACPI: Interpreter enabled [ 0.988013] ACPI: (supports S0 S5) [ 0.992559] ACPI: Using IOAPIC for interrupt routing [ 1.008401] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.016196] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.020028] pci 0000:00:00.0: PME# disabled [ 1.024058] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.032006] pci 0000:00:02.0: PME# disabled [ 1.036060] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.040006] pci 0000:00:03.0: PME# disabled [ 1.044056] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.052006] pci 0000:00:04.0: PME# disabled [ 1.056054] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.060006] pci 0000:00:05.0: PME# disabled [ 1.064059] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 1.072006] pci 0000:00:06.0: PME# disabled [ 1.076055] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.084006] pci 0000:00:07.0: PME# disabled [ 1.088251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.092007] pci 0000:00:1c.0: PME# disabled [ 1.096297] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.104008] pci 0000:00:1d.7: PME# disabled [ 1.109591] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.116052] pci 0000:05:00.0: PME# disabled [ 1.121746] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold [ 1.128051] pci 0000:05:00.3: PME# disabled [ 1.132784] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc' [ 1.145239] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.152052] pci 0000:06:00.0: PME# disabled [ 1.157651] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 1.164052] pci 0000:06:01.0: PME# disabled [ 1.171895] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 1.176052] pci 0000:07:00.0: PME# disabled [ 1.180510] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc' [ 1.197559] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.204052] pci 0000:08:00.0: PME# disabled [ 1.214936] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled [ 1.220028] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.228007] pci 0000:01:00.0: PME# disabled [ 1.232028] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc' [ 1.240519] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc' [ 1.253110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.260008] pci 0000:03:00.0: PME# disabled [ 1.264024] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pc' [ 1.272177] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 1.280008] pci 0000:04:00.0: PME# disabled [ 1.284256] pci 0000:00:1e.0: transparent bridge [ 1.308326] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 *6 7 10 11 12) [ 1.317298] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.324384] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.332386] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12) [ 1.340100] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) [ 1.346308] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) [ 1.353761] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.361727] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 1.369655] SCSI subsystem initialized [ 1.376227] usbcore: registered new interface driver usbfs [ 1.380107] usbcore: registered new interface driver hub [ 1.388080] usbcore: registered new device driver usb [ 1.392145] PCI: Using ACPI for IRQ routing [ 1.408118] PCI-GART: No AMD northbridge found. [ 1.416052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.420915] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.469330] pnp: PnP ACPI init [ 1.472391] ACPI: bus type pnp registered [ 1.486292] pnp: PnP ACPI: found 12 devices [ 1.490483] ACPI: ACPI bus type pnp unregistered [ 1.495125] system 00:08: ioport range 0x800-0x87f has been reserved [ 1.501472] system 00:08: ioport range 0x880-0x8bf has been reserved [ 1.507816] system 00:08: ioport range 0x8c0-0x8df has been reserved [ 1.514166] system 00:08: ioport range 0x8e0-0x8e3 has been reserved [ 1.520510] system 00:08: ioport range 0xc00-0xc7f has been reserved [ 1.526855] system 00:08: ioport range 0xca0-0xca7 has been reserved [ 1.533199] system 00:08: ioport range 0xca9-0xcab has been reserved [ 1.539541] system 00:08: ioport range 0xcad-0xcaf has been reserved [ 1.545894] system 00:09: ioport range 0xca8-0xca8 has been reserved [ 1.552237] system 00:09: ioport range 0xcac-0xcac has been reserved [ 1.558588] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.573263] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08 [ 1.579174] pci 0000:07:00.0: IO window: disabled [ 1.584136] pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.590265] pci 0000:07:00.0: PREFETCH window: disabled [ 1.595792] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 1.601702] pci 0000:06:00.0: IO window: disabled [ 1.606663] pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.612804] pci 0000:06:00.0: PREFETCH window: disabled [ 1.618332] pci 0000:06:01.0: PCI bridge, secondary bus 0000:09 [ 1.624241] pci 0000:06:01.0: IO window: disabled [ 1.629203] pci 0000:06:01.0: MEM window: disabled [ 1.634206] pci 0000:06:01.0: PREFETCH window: disabled [ 1.639734] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 [ 1.645643] pci 0000:05:00.0: IO window: disabled [ 1.650605] pci 0000:05:00.0: MEM window: 0xf4000000-0xf7ffffff [ 1.656734] pci 0000:05:00.0: PREFETCH window: disabled [ 1.662260] pci 0000:05:00.3: PCI bridge, secondary bus 0000:0a [ 1.668167] pci 0000:05:00.3: IO window: disabled [ 1.673128] pci 0000:05:00.3: MEM window: disabled [ 1.678132] pci 0000:05:00.3: PREFETCH window: disabled [ 1.683658] pci 0000:00:02.0: PCI bridge, secondary bus 0000:05 [ 1.689566] pci 0000:00:02.0: IO window: disabled [ 1.694438] pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff [ 1.700533] pci 0000:00:02.0: PREFETCH window: disabled [ 1.707009] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 1.712921] pci 0000:01:00.0: IO window: 0xe000-0xefff [ 1.718226] pci 0000:01:00.0: MEM window: 0xfc900000-0xfcafffff [ 1.724309] pci 0000:01:00.0: PREFETCH window: disabled [ 1.729701] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 1.735612] pci 0000:00:03.0: IO window: 0xe000-0xefff [ 1.740929] pci 0000:00:03.0: MEM window: 0xfc800000-0xfcafffff [ 1.747012] pci 0000:00:03.0: PREFETCH window: disabled [ 1.752403] pci 0000:00:04.0: PCI bridge, secondary bus 0000:0b [ 1.758311] pci 0000:00:04.0: IO window: disabled [ 1.763181] pci 0000:00:04.0: MEM window: 0xfc600000-0xfc7fffff [ 1.769266] pci 0000:00:04.0: PREFETCH window: 0x000000d8800000-0x000000d8ffffff [ 1.776824] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0c [ 1.782731] pci 0000:00:05.0: IO window: disabled [ 1.787602] pci 0000:00:05.0: MEM window: disabled [ 1.792559] pci 0000:00:05.0: PREFETCH window: disabled [ 1.797952] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0d [ 1.803862] pci 0000:00:06.0: IO window: disabled [ 1.808733] pci 0000:00:06.0: MEM window: 0xfc300000-0xfc5fffff [ 1.814818] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000d87fffff [ 1.822377] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0e [ 1.828284] pci 0000:00:07.0: IO window: disabled [ 1.833156] pci 0000:00:07.0: MEM window: disabled [ 1.838112] pci 0000:00:07.0: PREFETCH window: disabled [ 1.843503] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.849411] pci 0000:03:00.0: IO window: disabled [ 1.854285] pci 0000:03:00.0: MEM window: 0xf8000000-0xfbffffff [ 1.860371] pci 0000:03:00.0: PREFETCH window: disabled [ 1.865767] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 1.871675] pci 0000:00:1c.0: IO window: disabled [ 1.876557] pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff [ 1.882642] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.888037] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0f [ 1.893948] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 1.899252] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff [ 1.905338] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.912909] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.919697] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.926618] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.933813] pci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.940876] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.947584] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.954290] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.960997] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.967709] bus: 00 index 0 io port: [0x00-0xffff] [ 1.972491] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 1.978401] bus: 05 index 0 mmio: [0x0-0x0] [ 1.982576] bus: 05 index 1 mmio: [0xf2000000-0xf7ffffff] [ 1.987965] bus: 05 index 2 mmio: [0x0-0x0] [ 1.992139] bus: 05 index 3 mmio: [0x0-0x0] [ 1.996325] bus: 06 index 0 mmio: [0x0-0x0] [ 2.000500] bus: 06 index 1 mmio: [0xf4000000-0xf7ffffff] [ 2.005889] bus: 06 index 2 mmio: [0x0-0x0] [ 2.010064] bus: 06 index 3 mmio: [0x0-0x0] [ 2.014238] bus: 07 index 0 mmio: [0x0-0x0] [ 2.018413] bus: 07 index 1 mmio: [0xf4000000-0xf7ffffff] [ 2.023800] bus: 07 index 2 mmio: [0x0-0x0] [ 2.027976] bus: 07 index 3 mmio: [0x0-0x0] [ 2.032150] bus: 08 index 0 mmio: [0x0-0x0] [ 2.036324] bus: 08 index 1 mmio: [0xf4000000-0xf7ffffff] [ 2.041714] bus: 08 index 2 mmio: [0x0-0x0] [ 2.045889] bus: 08 index 3 mmio: [0x0-0x0] [ 2.050064] bus: 09 index 0 mmio: [0x0-0x0] [ 2.054239] bus: 09 index 1 mmio: [0x0-0x0] [ 2.058414] bus: 09 index 2 mmio: [0x0-0x0] [ 2.062588] bus: 09 index 3 mmio: [0x0-0x0] [ 2.066762] bus: 0a index 0 mmio: [0x0-0x0] [ 2.070939] bus: 0a index 1 mmio: [0x0-0x0] [ 2.075113] bus: 0a index 2 mmio: [0x0-0x0] [ 2.079288] bus: 0a index 3 mmio: [0x0-0x0] [ 2.083463] bus: 01 index 0 io port: [0xe000-0xefff] [ 2.088418] bus: 01 index 1 mmio: [0xfc800000-0xfcafffff] [ 2.093806] bus: 01 index 2 mmio: [0x0-0x0] [ 2.097980] bus: 01 index 3 mmio: [0x0-0x0] [ 2.102155] bus: 02 index 0 io port: [0xe000-0xefff] [ 2.107110] bus: 02 index 1 mmio: [0xfc900000-0xfcafffff] [ 2.112498] bus: 02 index 2 mmio: [0x0-0x0] [ 2.116672] bus: 02 index 3 mmio: [0x0-0x0] [ 2.120848] bus: 0b index 0 mmio: [0x0-0x0] [ 2.125032] bus: 0b index 1 mmio: [0xfc600000-0xfc7fffff] [ 2.130420] bus: 0b index 2 mmio: [0xd8800000-0xd8ffffff] [ 2.135808] bus: 0b index 3 mmio: [0x0-0x0] [ 2.139984] bus: 0c index 0 mmio: [0x0-0x0] [ 2.144158] bus: 0c index 1 mmio: [0x0-0x0] [ 2.148333] bus: 0c index 2 mmio: [0x0-0x0] [ 2.152509] bus: 0c index 3 mmio: [0x0-0x0] [ 2.156684] bus: 0d index 0 mmio: [0x0-0x0] [ 2.160858] bus: 0d index 1 mmio: [0xfc300000-0xfc5fffff] [ 2.166246] bus: 0d index 2 mmio: [0xd8000000-0xd87fffff] [ 2.171636] bus: 0d index 3 mmio: [0x0-0x0] [ 2.175812] bus: 0e index 0 mmio: [0x0-0x0] [ 2.179986] bus: 0e index 1 mmio: [0x0-0x0] [ 2.184162] bus: 0e index 2 mmio: [0x0-0x0] [ 2.188337] bus: 0e index 3 mmio: [0x0-0x0] [ 2.192513] bus: 03 index 0 mmio: [0x0-0x0] [ 2.196687] bus: 03 index 1 mmio: [0xf8000000-0xfbffffff] [ 2.202077] bus: 03 index 2 mmio: [0x0-0x0] [ 2.206253] bus: 03 index 3 mmio: [0x0-0x0] [ 2.210428] bus: 04 index 0 mmio: [0x0-0x0] [ 2.214604] bus: 04 index 1 mmio: [0xf8000000-0xfbffffff] [ 2.219992] bus: 04 index 2 mmio: [0x0-0x0] [ 2.224166] bus: 04 index 3 mmio: [0x0-0x0] [ 2.228343] bus: 0f index 0 io port: [0xd000-0xdfff] [ 2.233299] bus: 0f index 1 mmio: [0xfc100000-0xfc2fffff] [ 2.238687] bus: 0f index 2 mmio: [0xd0000000-0xd7ffffff] [ 2.244077] bus: 0f index 3 io port: [0x00-0xffff] [ 2.248859] bus: 0f index 4 mmio: [0x000000-0xffffffffffffffff] [ 2.255064] NET: Registered protocol family 2 [ 1528.453016] Clocksource tsc unstable (delta = 1499794012204 ns) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists