[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <490380C8.6070003@simon.arlott.org.uk>
Date: Sat, 25 Oct 2008 21:25:44 +0100
From: Simon Arlott <simon@...e.lp0.eu>
To: Francois Romieu <romieu@...zoreil.com>
CC: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
netdev <netdev@...r.kernel.org>
Subject: r8169 MAC addresses broken
Somewhere between 2.6.24 (it would take too long to bisect) and now
(e013e13bf605b9e6b702adffbe2853cfc60e7806), 2/3 of my MAC addresses
are getting set to zero:
[ 1.533565] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.539277] r8169 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.547518] r8169 0000:00:09.0: PCI: Disallowing DAC for device
[ 1.553569] r8169 0000:00:09.0: no PCI Express capability
[ 1.559063] r8169 0000:00:09.0: VPD access disabled, enabling
[ 1.565822] r8169 0000:00:09.0: MAC address found in EEPROM: 00:30:18:b0:25:c2
[ 1.573873] eth0: RTL8169sc/8110sc at 0xbf6f8000, 00:00:00:00:25:c2, XID 18000000 IRQ 10
[ 1.582877] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.595795] r8169 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.604039] r8169 0000:00:0b.0: PCI: Disallowing DAC for device
[ 1.610089] r8169 0000:00:0b.0: no PCI Express capability
[ 1.615581] r8169 0000:00:0b.0: VPD access disabled, enabling
[ 1.622336] r8169 0000:00:0b.0: MAC address found in EEPROM: 00:30:18:b0:25:c3
[ 1.630854] eth1: RTL8169sc/8110sc at 0xbf6fc000, 00:00:00:00:25:c3, XID 18000000 IRQ 11
If I set the MAC address to the correct value it then ignores packets
sent to it and I have to use promiscuous mode.
00:09.0 0200: 10ec:8167 (rev 10)
Subsystem: 16f3:10ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at f600 [size=256]
Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data <?>
Kernel driver in use: r8169
00:0b.0 0200: 10ec:8167 (rev 10)
Subsystem: 16f3:10ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f800 [size=256]
Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 40020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [60] Vital Product Data <?>
Kernel driver in use: r8169
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists