linux-kernel - Re: Suspend to RAM regression in 2.6.28-rc2 (bisected)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081027205204.GA4566@localhost.aei.mpg.de>
Date:	Mon, 27 Oct 2008 21:52:04 +0100
From:	"Carlos R. Mafra" <crmafra2@...il.com>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
Cc:	Johannes Berg <johannes@...solutions.net>,
	Soeren Sonnenburg <kernel@....de>,
	linux-kernel@...r.kernel.org, tomas.winkler@...el.com,
	"John W. Linville" <linville@...driver.com>,
	linux-wireless@...r.kernel.org
Subject: Re: Suspend to RAM regression in 2.6.28-rc2 (bisected)

On Mon 27.Oct'08 at 21:51:00 +0100, Rafael J. Wysocki wrote:
> On Monday, 27 of October 2008, Carlos R. Mafra wrote:
> > On Mon 27.Oct'08 at 20:13:43 +0100, Johannes Berg wrote:
> > > On Mon, 2008-10-27 at 20:11 +0100, Carlos R. Mafra wrote:
> > > 
> > > > > Do you get any kernel messages output? If you do, could you put messages
> > > > > into each line of ieee80211_set_disassoc to see where it hangs?
> > > > 
> > > > No messages appear, just a black screen.
> > > > 
> > > > But I can use the SysRq keys, and when I umount the
> > > > screen shows the message that umount succeed. I also tried SysRq+t but
> > > > the messages appear to fast to read.
> > > 
> > > Ok, but that means you _can_ get messages, it would help a lot if you
> > > could put a few printks into the set_disassoc function before/after each
> > > other function call, so we know where exactly it hangs. Pretty much all
> > > of them could possibly hang if there is some sort of locking error
> > > happening or anything relies on userspace to be running...
> > 
> > Ok, I humbly tried to do that with the patch at the end of the email,
> > but I did not appear to hang in this function tough.
> > 
> > Somehow I could get some messages printed when it was a black screen
> > before (I think it has to do with the debug level I set with SysRq...)
> > and I could see all the printks I've put there. 
> > 
> > The good thing is that I could get the complete syslog of the boot until 
> > the it failed after suspending to RAM (in 2.6.28-rc2 with my debug patch
> > below applied). The last messages before the laptop become unresponsive
> > (except for the SysRq) were these ones:
> > 
> > Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:radio
> > Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:assoc
> > Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:RX
> > Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:TX
> > Oct 27 21:03:06 localhost kernel: before rcu_read_lock
> > Oct 27 21:03:06 localhost kernel: before netif_tx_stop_all_queues
> > Oct 27 21:03:06 localhost kernel: before netif_carrier_off
> > Oct 27 21:03:06 localhost kernel: before ieee80211_sta
> > Oct 27 21:03:06 localhost kernel: inside sef_disconnected 1
> > Oct 27 21:03:06 localhost kernel: before ieee8021_led_assoc
> > Oct 27 21:03:06 localhost kernel: before ieee8021_sta_send_apinfo
> > Oct 27 21:03:06 localhost kernel: before sta_info_unlink
> > Oct 27 21:03:06 localhost kernel: before rcu_read_unlock
> > Oct 27 21:03:06 localhost kernel: before sta_info_destroy
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Starting disk
> > Oct 27 21:03:06 localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> > Oct 27 21:03:06 localhost kernel: ata1.00: configured for UDMA/100
> > Oct 27 21:03:06 localhost kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
> > Oct 27 21:03:06 localhost kernel: ata1: irq_stat 0x00000040, connection status changed
> > Oct 27 21:03:06 localhost kernel: ata1: hard resetting link
> > Oct 27 21:03:06 localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
> > Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> > Oct 27 21:03:06 localhost kernel: ata1.00: configured for UDMA/100
> > Oct 27 21:03:06 localhost kernel: ata1: EH complete
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 27 21:03:06 localhost kernel: Restarting tasks ... done.
> > Oct 27 21:03:07 localhost ifplugd(wlan0)[3182]: Link beat lost.
> > Oct 27 21:03:13 localhost ifplugd(wlan0)[3182]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'.
> > Oct 27 21:06:20 localhost kernel: SysRq : Changing Loglevel
> > Oct 27 21:06:20 localhost kernel: Loglevel set to 4
> > Oct 27 21:06:22 localhost kernel: SysRq : Changing Loglevel
> > Oct 27 21:06:22 localhost kernel: Loglevel set to 6
> > Oct 27 21:06:32 localhost kernel: ffff80251670>] ? autoremove_wake_function+0x0/0x40
> > Oct 27 21:06:32 localhost kernel:  [<ffffffff8024e200>] ? worker_thread+0x0/0x110
> > Oct 27 21:06:32 localhost kernel:  [<ffffffff8025119d>] kthread+0x4d/0x80
> > Oct 27 21:06:32 localhost kernel:  [<ffffffff8020d1b9>] child_rip+0xa/0x11
> > 
> > and I have the complete trace also. I can try to put it somewhere in the web if it helps
> > (I already tried it, but I am new at the institute here and I could not set up my
> > webpage yet :-(
> 
> Please attach it to http://bugzilla.kernel.org/show_bug.cgi?id=11845 .

Done.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/