[<prev] [next>] [day] [month] [year] [list]
Message-Id: <200810282205.49176.arvidjaar@mail.ru>
Date: Tue, 28 Oct 2008 22:05:48 +0300
From: Andrey Borzenkov <arvidjaar@...l.ru>
To: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: linux-acpi@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-input@...r.kernel.org
Subject: 2.6.28-rc2 regression: keyboard dead after reboot on Toshiba Portege 4000
The visible effect is that I have long pause (noticeably longer
than in 2.5.27) after switch off, then system is switched on, and
keyboard does not work. I have to turn it off using power button to
get keyboard back. Mouse works.
Before I had similar symptoms when I had to hard turn system off
using power button (e.g. when kernel hung and SysRq was not functional).
In this case *first* poweron resulted in dead keyboard; I had to switch
system off and on again to use it.
And yes, I now how to do bisecting, but in my case it would take ages.
So I'd rather test several revert candiates ...
Just in case here is dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Linux version 2.6.28-rc2-1avb (bor@...ker) (gcc version 4.3.2 (GCC) ) #3 Mon Oct 27 22:14:49 MSK 2008
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] PAT WC disabled due to known CPU erratum.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable)
[ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ef60 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000
[ 0.000000] RAMDISK: 1eba9000 - 1ef4f0ed
[ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB)
[ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM 4010000)
[ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM 4010000)
[ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT 100000A)
[ 0.000000] ACPI: FACS 000EEE00, 0040
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] 495MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ef60000
[ 0.000000] low ram: 00000000 - 1ef60000
[ 0.000000] bootmap 00001000 - 00004dec
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ef60000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 000095cbf4] TEXT DATA BSS ==> [0000100000 - 000095cbf4]
[ 0.000000] #2 [001eba9000 - 001ef4f0ed] RAMDISK ==> [001eba9000 - 001ef4f0ed]
[ 0.000000] #3 [000095d000 - 0000961000] INIT_PG_TABLE ==> [000095d000 - 0000961000]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ef60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ef60
[ 0.000000] On node 0 totalpages: 126719
[ 0.000000] free_area_init_node: node 0, pgdat c03f41e0, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 959 pages used for memmap
[ 0.000000] Normal zone: 121761 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0xee08
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125728
[ 0.000000] Kernel command line: BOOT_IMAGE=2.6.28-rc2-1avb root=LABEL=/ resume=LABEL=swap acpi_backlight=vendor netconsole=@...0.0.1/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=791
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c043f000 soft=c043e000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 747.712 MHz processor.
[ 0.003333] Console: colour dummy device 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2463 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] ------------------------
[ 0.003333] | Locking API testsuite:
[ 0.003333] ----------------------------------------------------------------------------
[ 0.003333] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.003333] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] recursive read-lock: | ok | | ok |
[ 0.003333] recursive read-lock #2: | ok | | ok |
[ 0.003333] mixed read-write-lock: | ok | | ok |
[ 0.003333] mixed write-read-lock: | ok | | ok |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] hard-irq read-recursion/123: ok |
[ 0.003333] soft-irq read-recursion/123: ok |
[ 0.003333] hard-irq read-recursion/132: ok |
[ 0.003333] soft-irq read-recursion/132: ok |
[ 0.003333] hard-irq read-recursion/213: ok |
[ 0.003333] soft-irq read-recursion/213: ok |
[ 0.003333] hard-irq read-recursion/231: ok |
[ 0.003333] soft-irq read-recursion/231: ok |
[ 0.003333] hard-irq read-recursion/312: ok |
[ 0.003333] soft-irq read-recursion/312: ok |
[ 0.003333] hard-irq read-recursion/321: ok |
[ 0.003333] soft-irq read-recursion/321: ok |
[ 0.003333] -------------------------------------------------------
[ 0.003333] Good, all 218 testcases passed! |
[ 0.003333] ---------------------------------
[ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.003333] Memory: 489948k/507264k available (2088k kernel code, 16732k reserved, 974k data, 240k init, 0k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xffffa000 - 0xfffff000 ( 20 kB)
[ 0.003333] vmalloc : 0xdf760000 - 0xffff8000 ( 520 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB)
[ 0.003333] .init : 0xc03ff000 - 0xc043b000 ( 240 kB)
[ 0.003333] .data : 0xc030a366 - 0xc03fdf5c ( 974 kB)
[ 0.003333] .text : 0xc0100000 - 0xc030a366 (2088 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.003410] Calibrating delay loop (skipped), value calculated using timer frequency.. 1496.73 BogoMIPS (lpj=2492373)
[ 0.003576] Mount-cache hash table entries: 512
[ 0.005913] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.005956] CPU: L2 cache: 256K
[ 0.005974] CPU serial number disabled.
[ 0.006017] CPU: Intel Pentium III (Coppermine) stepping 0a
[ 0.006060] Checking 'hlt' instruction... OK.
[ 0.017725] Freeing SMP alternatives: 0k freed
[ 0.017747] ACPI: Core revision 20080926
[ 0.047471] ACPI: setting ELCR to 0200 (from 0a00)
[ 0.048051] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048079] ftrace: allocating 9102 hash entries in 35 pages
[ 0.071549] Testing tracer nop: PASSED
[ 0.075010] net_namespace: 392 bytes
[ 0.076364] NET: Registered protocol family 16
[ 0.079577] ACPI: bus type pci registered
[ 0.081563] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
[ 0.081612] PCI: Using configuration type 1 for base access
[ 0.102414] ACPI: EC: Look up EC in DSDT
[ 0.132820] ACPI: Interpreter enabled
[ 0.132880] ACPI: (supports S0 S3 S4 S5)
[ 0.133304] ACPI: Using PIC for interrupt routing
[ 0.193081] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.193251] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.194407] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.194768] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff]
[ 0.194893] pci 0000:00:02.0: PME# supported from D3hot D3cold
[ 0.194943] pci 0000:00:02.0: PME# disabled
[ 0.195127] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff]
[ 0.195303] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff]
[ 0.195328] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff]
[ 0.195436] pci 0000:00:06.0: supports D1 D2
[ 0.195444] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.195473] pci 0000:00:06.0: PME# disabled
[ 0.195909] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101 ACPI
[ 0.195941] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101 SMB
[ 0.196066] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff]
[ 0.196091] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f]
[ 0.196116] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.196210] pci 0000:00:0a.0: supports D1 D2
[ 0.196218] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196248] pci 0000:00:0a.0: PME# disabled
[ 0.196391] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.196426] pci 0000:00:10.0: supports D1 D2
[ 0.196434] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196464] pci 0000:00:10.0: PME# disabled
[ 0.196725] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.196871] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.197035] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff]
[ 0.197162] pci 0000:00:12.0: supports D1 D2
[ 0.197170] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197202] pci 0000:00:12.0: PME# disabled
[ 0.197413] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.197438] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff]
[ 0.197461] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.197485] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff]
[ 0.197536] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.197574] pci 0000:01:00.0: supports D1 D2
[ 0.197726] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff]
[ 0.197949] bus 00 -> node 0
[ 0.198001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.198733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.236375] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 0.237417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 0.238326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
[ 0.239230] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
[ 0.240250] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[ 0.241161] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.242680] ACPI: Power Resource [PFAN] (off)
[ 0.245572] PCI: Using ACPI for IRQ routing
[ 0.247989] pnp: PnP ACPI init
[ 0.247989] ACPI: bus type pnp registered
[ 0.274758] pnp: PnP ACPI: found 12 devices
[ 0.274816] ACPI: ACPI bus type pnp unregistered
[ 0.274938] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.274968] system 00:00: iomem range 0xe0000-0xeffff could not be reserved
[ 0.274996] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.275024] system 00:00: iomem range 0x100000-0x1ef5ffff could not be reserved
[ 0.275054] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be reserved
[ 0.275085] system 00:00: iomem range 0x1f000000-0x1fffffff could not be reserved
[ 0.275116] system 00:00: iomem range 0x1ef70000-0x1effffff could not be reserved
[ 0.275150] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.275249] system 00:08: ioport range 0x370-0x371 has been reserved
[ 0.275276] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.275302] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.275327] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.275353] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.275378] system 00:08: ioport range 0x6c0-0x6ff has been reserved
[ 0.275404] system 00:08: ioport range 0xe000-0xe07f has been reserved
[ 0.275430] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[ 0.275456] system 00:08: ioport range 0xe400-0xe47f has been reserved
[ 0.275482] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[ 0.275508] system 00:08: ioport range 0xe800-0xe87f has been reserved
[ 0.275534] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[ 0.275560] system 00:08: ioport range 0xec00-0xec7f has been reserved
[ 0.275587] system 00:08: ioport range 0xec80-0xecff has been reserved
[ 0.275615] system 00:08: ioport range 0xee00-0xee41 could not be reserved
[ 0.275642] system 00:08: ioport range 0xee90-0xee9f has been reserved
[ 0.275668] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[ 0.275696] system 00:08: ioport range 0xef00-0xef3f could not be reserved
[ 0.275723] system 00:08: ioport range 0xef40-0xef5f has been reserved
[ 0.316315] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.316370] pci 0000:00:01.0: IO window: disabled
[ 0.316403] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff
[ 0.316434] pci 0000:00:01.0: PREFETCH window: 0x00000048000000-0x000000480fffff
[ 0.316481] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02
[ 0.316504] pci 0000:00:10.0: IO window: 0x001000-0x0010ff
[ 0.316533] pci 0000:00:10.0: IO window: 0x001400-0x0014ff
[ 0.316562] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.316593] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff
[ 0.316624] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06
[ 0.316678] pci 0000:00:11.0: IO window: 0x001800-0x0018ff
[ 0.316709] pci 0000:00:11.0: IO window: 0x001c00-0x001cff
[ 0.316738] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff
[ 0.316769] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff
[ 0.316800] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a
[ 0.316822] pci 0000:00:11.1: IO window: 0x002000-0x0020ff
[ 0.316851] pci 0000:00:11.1: IO window: 0x002400-0x0024ff
[ 0.316880] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff
[ 0.316911] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff
[ 0.316980] pci 0000:00:01.0: setting latency timer to 64
[ 0.317015] pci 0000:00:10.0: enabling device (0000 -> 0003)
[ 0.318866] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.318895] PCI: setting IRQ 11 as level-triggered
[ 0.318909] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.318970] pci 0000:00:11.0: enabling device (0000 -> 0003)
[ 0.320462] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.320489] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.320550] pci 0000:00:11.1: enabling device (0000 -> 0003)
[ 0.322000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.322026] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.322075] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.322094] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.322113] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.322130] bus: 01 index 1 mmio: [0xf7f00000-0xfdffffff]
[ 0.322150] bus: 01 index 2 mmio: [0x48000000-0x480fffff]
[ 0.322168] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.322186] bus: 02 index 0 io port: [0x1000-0x10ff]
[ 0.322205] bus: 02 index 1 io port: [0x1400-0x14ff]
[ 0.322223] bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
[ 0.322242] bus: 02 index 3 mmio: [0x34000000-0x37ffffff]
[ 0.322262] bus: 06 index 0 io port: [0x1800-0x18ff]
[ 0.322280] bus: 06 index 1 io port: [0x1c00-0x1cff]
[ 0.322298] bus: 06 index 2 mmio: [0x38000000-0x3bffffff]
[ 0.322317] bus: 06 index 3 mmio: [0x3c000000-0x3fffffff]
[ 0.322337] bus: 0a index 0 io port: [0x2000-0x20ff]
[ 0.322355] bus: 0a index 1 io port: [0x2400-0x24ff]
[ 0.322373] bus: 0a index 2 mmio: [0x40000000-0x43ffffff]
[ 0.322393] bus: 0a index 3 mmio: [0x44000000-0x47ffffff]
[ 0.322476] NET: Registered protocol family 2
[ 0.323535] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.324682] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.325421] TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
[ 0.331441] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.331713] TCP reno registered
[ 0.332389] NET: Registered protocol family 1
[ 0.333862] checking if image is initramfs... it is
[ 0.816879] Switched to high resolution mode on CPU 0
[ 1.297685] Freeing initrd memory: 3736k freed
[ 1.305819] Initializing RT-Tester: OK
[ 1.307436] audit: initializing netlink socket (disabled)
[ 1.307667] type=2000 audit(1225219290.306:1): initialized
[ 1.323264] Kprobe smoke test started
[ 1.327812] Kprobe smoke test passed successfully
[ 1.327929] Testing tracer sched_switch: PASSED
[ 1.430671] Testing tracer ftrace: PASSED
[ 1.557946] Testing dynamic ftrace: PASSED
[ 1.827949] msgmni has been set to 964
[ 1.829450] io scheduler noop registered
[ 1.829493] io scheduler anticipatory registered
[ 1.829513] io scheduler deadline registered
[ 1.829641] io scheduler cfq registered (default)
[ 1.829927] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 1.830013] pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling
[ 1.830227] pci 0000:01:00.0: Boot video device
[ 1.833150] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000, using 3072k, total 16384k
[ 1.833204] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 1.833225] vesafb: protected mode interface info at c000:775e
[ 1.833247] vesafb: pmi: set display start = c00c777f, set palette = c00c77e2
[ 1.833269] vesafb: scrolling: redraw
[ 1.833290] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.901005] Console: switching to colour frame buffer device 128x48
[ 1.966818] fb0: VESA VGA frame buffer device
[ 2.365503] brd: module loaded
[ 2.365954] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.366968] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.369829] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 2.370661] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.398887] e100 0000:00:0a.0: PME# disabled
[ 2.400727] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr 00:00:39:d7:14:a1
[ 2.402144] netconsole: local port 6665
[ 2.402630] netconsole: local IP 10.0.0.1
[ 2.403128] netconsole: interface eth0
[ 2.403676] netconsole: remote port 6666
[ 2.404166] netconsole: remote IP 10.0.0.2
[ 2.404678] netconsole: remote ethernet address 00:17:42:21:27:e4
[ 2.405468] netconsole: device eth0 not up yet, forcing it
[ 6.436728] netconsole: timeout waiting for carrier
[ 6.439411] console [netcon0] enabled
[ 12.089157] Clocksource tsc unstable (delta = 4687087476 ns)
[ 12.113944] netconsole: network logging started
[ 12.138790] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.168646] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.192643] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.219155] mice: PS/2 mouse device common for all mice
[ 12.243590] cpuidle: using governor ladder
[ 12.267057] cpuidle: using governor menu
[ 12.290370] TCP cubic registered
[ 12.313265] Using IPI Shortcut mode
[ 12.339472] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 12.365497] Freeing unused kernel memory: 240k freed
[ 12.389515] Write protecting the kernel read-only data: 804k
[ 12.438783] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 13.000459] SCSI subsystem initialized
[ 13.072363] Driver 'sd' needs updating - please use bus_type methods
[ 13.199825] libata version 3.00 loaded.
[ 13.241426] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 13.266694] scsi0 : pata_ali
[ 13.292060] scsi1 : pata_ali
[ 13.320025] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14
[ 13.343377] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15
[ 13.524307] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100
[ 13.547347] ata1.00: 39070080 sectors, multi 0: LBA
[ 13.570174] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 13.604141] ata1.00: configured for UDMA/33
[ 13.823921] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33
[ 13.846515] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 13.869240] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 13.903874] ata2.00: configured for UDMA/33
[ 13.931500] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0 DA3O PQ: 0 ANSI: 5
[ 13.958177] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 13.982852] sd 0:0:0:0: [sda] Write Protect is off
[ 14.007087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.007315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.034288] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 14.059678] sd 0:0:0:0: [sda] Write Protect is off
[ 14.084964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.085270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.111012] sda: sda1 sda2
[ 14.406085] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.446376] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502 1313 PQ: 0 ANSI: 5
[ 17.308560] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 17.335282] ReiserFS: sda2: using ordered data mode
[ 17.379047] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 17.442824] ReiserFS: sda2: checking transaction log (sda2)
[ 17.520752] ReiserFS: sda2: Using r5 hash to sort names
[ 58.689383] usbcore: registered new interface driver usbfs
[ 58.716608] usbcore: registered new interface driver hub
[ 58.743242] usbcore: registered new device driver usb
[ 65.830582] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 65.832729] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 65.832749] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 65.832920] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 65.835604] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 65.835734] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
[ 65.892791] usb usb1: configuration #1 chosen from 1 choice
[ 65.893645] hub 1-0:1.0: USB hub found
[ 65.893925] hub 1-0:1.0: 3 ports detected
[ 66.157858] Linux agpgart interface v0.103
[ 66.175761] ACPI Warning (nspredef-0858): \_SB_.BAT1._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
[ 66.178279] ACPI: Battery Slot [BAT1] (battery present)
[ 66.178625] ACPI: Battery Slot [BAT2] (battery absent)
[ 66.254535] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 66.273271] ACPI: Power Button (FF) [PWRF]
[ 66.274016] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 66.274461] ACPI: Lid Switch [LID]
[ 66.292614] ACPI: AC Adapter [ADP1] (off-line)
[ 66.347890] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 66.349373] processor ACPI0007:00: registered as cooling_device0
[ 66.373496] agpgart-ali 0000:00:00.0: ALi M1644 chipset
[ 66.410315] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 66.439829] thermal LNXTHERM:01: registered as thermal_zone0
[ 66.441873] ACPI: Thermal Zone [THRM] (50 C)
[ 66.633036] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 66.633054] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 66.637764] input: Toshiba RFKill Switch as /devices/virtual/input/input3
[ 66.752678] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input4
[ 66.778071] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 66.809622] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 66.809996] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 66.819296] ACPI: Transitioning device [FAN] to D3
[ 66.819594] fan PNP0C0B:00: registered as cooling_device1
[ 66.819630] ACPI: Fan [FAN] (off)
[ 67.124073] pci 0000:00:08.0: enabling device (0000 -> 0001)
[ 67.130246] ALi_M1535: initialized. timeout=60 sec (nowayout=0)
[ 67.244036] Driver 'sr' needs updating - please use bus_type methods
[ 67.307413] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 67.307439] Uniform CD-ROM driver Revision: 3.20
[ 67.308855] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 67.699473] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 68.191660] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 68.435651] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01]
[ 68.563839] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11
[ 68.563857] yenta_cardbus 0000:00:10.0: Socket status: 30000011
[ 68.567481] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001]
[ 68.696068] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 68.696086] yenta_cardbus 0000:00:11.0: Socket status: 30000007
[ 68.701499] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001]
[ 68.839726] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 68.839745] yenta_cardbus 0000:00:11.1: Socket status: 30000007
[ 69.210160] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 70.137343] NET: Registered protocol family 23
[ 70.147647] rtc_cmos 00:07: RTC can wake from S4
[ 70.149723] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 70.149824] rtc0: alarms up to one year, 114 bytes nvram, irqs
[ 71.705464] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC IrDA chip, pre-configuring device.
[ 71.705503] Activated ALi 1533 ISA bridge port 0x02e8.
[ 71.705521] Activated ALi 1533 ISA bridge port 0x02f8.
[ 71.705777] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 71.705793] smsc_superio_flat(): IrDA not enabled
[ 71.705822] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x02
[ 71.705864] SMsC IrDA Controller found
[ 71.705868] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 71.706080] No transceiver found. Defaulting to Fast pin select
[ 71.707223] IrDA: Registered device irda0
[ 72.873489] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 72.875203] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 72.875222] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 77.653084] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 77.656956] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 77.658657] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 77.660096] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 77.662822] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 77.673981] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 77.677823] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean.
[ 77.679542] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean.
[ 77.680960] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean.
[ 77.683902] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean.
[ 77.895977] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 77.923510] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 78.436032] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 78.439493] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 78.441049] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 78.442885] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 78.445616] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 79.088297] Marking TSC unstable due to TSC halts in idle
[ 79.337105] orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al)
[ 79.447146] orinoco_cs 0.15 (David Gibson <hermes@...son.dropbear.id.au>, Pavel Roskin <proski@....org>, et al)
[ 79.534977] eth1: Hardware identity 0005:0002:0001:0002
[ 79.535112] eth1: Station identity 001f:0001:0006:000e
[ 79.535124] eth1: Firmware determined as Lucent/Agere 6.14
[ 79.535145] eth1: Attempting to download firmware agere_sta_fw.bin
[ 79.535175] hermes_dld: AUX enable returned 0
[ 79.536181] hermes_dld: AUX disable returned 0
[ 79.536189] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 79.536197] eth1: Read PDA returned 0
[ 79.536210] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 79.746491] hermes_dld: AUX enable returned 0
[ 79.746506] hermes_dld: Enabling volatile, EP 0x000f8000
[ 79.747612] hermes_dld: PROGRAM_ENABLE returned 0
[ 79.747621] eth1: Program init returned 0
[ 79.747630] hermes_dld: Programming block of length 60416 to address 0x001f0000
[ 79.795998] hermes_dld: Programming block of length 4096 to address 0x001ef000
[ 79.799287] eth1: Program returned 0
[ 79.799298] hermes_dld: Found record 0x0003 at de7edc1c
[ 79.799319] hermes_dld: Found record 0x0005 at de7edca8
[ 79.799339] hermes_dld: Found record 0x0008 at de7edcd2
[ 79.799356] hermes_dld: Found record 0x0007 at de7edcc4
[ 79.799374] hermes_dld: Found record 0x0006 at de7edcb6
[ 79.799394] hermes_dld: Found record 0x0110 at de7edd9a
[ 79.799428] hermes_dld: Found record 0x0120 at de7eddba
[ 79.799461] hermes_dld: Found record 0x0130 at de7eddda
[ 79.799494] hermes_dld: Found record 0x0140 at de7eddfa
[ 79.799508] hermes_dld: Found record 0x0150 at de7ede02
[ 79.799521] hermes_dld: Using default record 0x0160 at dfb6bba0
[ 79.799554] hermes_dld: Found record 0x0101 at de7edd46
[ 79.799569] hermes_dld: Found record 0x0103 at de7edd5c
[ 79.799589] hermes_dld: Found record 0x0104 at de7edd6c
[ 79.799601] hermes_dld: Found record 0x0105 at de7edd72
[ 79.799614] hermes_dld: Found record 0x0105 at de7edd72
[ 79.799626] hermes_dld: Found record 0x0105 at de7edd72
[ 79.799638] hermes_dld: Found record 0x0107 at de7edd7e
[ 79.799650] hermes_dld: Found record 0x0109 at de7edd8c
[ 79.799669] hermes_dld: Using default record 0x0161 at dfb6bbc0
[ 79.799884] eth1: Apply PDA returned 0
[ 79.799949] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000
[ 79.799978] hermes_dld: AUX disable returned 0
[ 79.810623] eth1: Program end returned 0
[ 79.810632] eth1: hermes_present returned 1
[ 79.811441] eth1: Hardware identity 0005:0002:0001:0002
[ 79.811568] eth1: Station identity 001f:0002:0009:0030
[ 79.811579] eth1: Firmware determined as Lucent/Agere 9.48
[ 79.811588] eth1: Ad-hoc demo mode supported
[ 79.811595] eth1: IEEE standard IBSS ad-hoc mode supported
[ 79.811603] eth1: WEP supported, 104-bit key
[ 79.811611] eth1: WPA-PSK supported
[ 80.239692] eth1: MAC address 00:02:2d:26:95:6c
[ 80.239806] eth1: Station name "HERMES I"
[ 80.240628] eth1: ready
[ 80.241525] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f
[ 80.571111] Toshiba System Management Mode driver v1.11 26/9/2001
[ 80.661544] Non-volatile memory driver v1.2
[ 81.413572] Uniform Multi-Platform E-IDE driver
[ 81.757503] device-mapper: uevent: version 1.0.3
[ 81.771200] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com
[ 82.010372] device-mapper: multipath: version 1.0.5 loaded
[ 82.658252] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 82.659755] device-mapper: table: 254:0: multipath: error getting device
[ 82.659774] device-mapper: ioctl: error adding target to table
[ 88.083938] loop: module loaded
[ 91.341947] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1 across:500432k
[ 99.250075] IrCOMM protocol (Dag Brattli)
[ 100.840075] PPP generic driver version 2.4.2
[ 110.709496] NET: Registered protocol family 17
[ 113.920753] ------------[ cut here ]------------
[ 113.920828] kernel BUG at /home/bor/src/linux-git/net/rfkill/rfkill.c:347!
[ 113.920845] invalid opcode: 0000 [#1]
[ 113.920877] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/host0/target0:0:0/0:0:0:0/block/sda/size
[ 113.920900] Dumping ftrace buffer:
[ 113.920919] (ftrace buffer empty)
[ 113.920933] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc loop dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod alim15x3 ide_core nvram toshiba cryptomgr aead crypto_blkcipher michael_mic crypto_algapi orinoco_cs orinoco hermes_dld hermes pcmcia firmware_class snd_ali5451 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device smsc_ircc2 snd_pcm_oss snd_pcm rtc_cmos irda snd_timer snd_mixer_oss rtc_core snd crc_ccitt yenta_socket rtc_lib rsrc_nonstatic i2c_ali1535 pcmcia_core pcspkr psmouse soundcore i2c_core evdev sr_mod snd_page_alloc alim1535_wdt cdrom fan sg video output toshiba_acpi rfkill thermal backlight ali_agp processor ac button input_polldev battery agpgart ohci_hcd usbcore reiserfs pata_ali libata sd_mod scsi_mod [last unloaded: scsi_wait_scan]
[ 113.921765]
[ 113.921785] Pid: 3272, comm: ipolldevd Not tainted (2.6.28-rc2-1avb #3) PORTEGE 4000
[ 113.921801] EIP: 0060:[<dfaa4683>] EFLAGS: 00010246 CPU: 0
[ 113.921854] EIP is at rfkill_force_state+0x53/0x90 [rfkill]
[ 113.921870] EAX: 00000000 EBX: 00000000 ECX: 00000003 EDX: 00000000
[ 113.921885] ESI: 00000000 EDI: ddd50300 EBP: d8d7af40 ESP: d8d7af24
[ 113.921900] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 113.921918] Process ipolldevd (pid: 3272, ti=d8d7a000 task=d8d93c90 task.ti=d8d7a000)
[ 113.921933] Stack:
[ 113.921945] d8d7af38 00000246 dfb029d8 dfb029c0 dfb029d8 dfb029c0 ddd50300 d8d7af5c
[ 113.922014] dfb018e2 01000246 01000000 ddd50300 ddd50314 ddabb8a0 d8d7af68 dfb381c1
[ 113.922098] 00000000 d8d7afa4 c012ec0a 00000000 00000002 00000000 c012eba8 ddabb8c0
[ 113.922240] Call Trace:
[ 113.922240] [<dfb018e2>] ? bt_poll_rfkill+0x5c/0x82 [toshiba_acpi]
[ 113.922240] [<dfb381c1>] ? input_polled_device_work+0x11/0x40 [input_polldev]
[ 113.922240] [<c012ec0a>] ? run_workqueue+0xea/0x1f0
[ 113.922240] [<c012eba8>] ? run_workqueue+0x88/0x1f0
[ 113.922240] [<dfb381b0>] ? input_polled_device_work+0x0/0x40 [input_polldev]
[ 113.922240] [<c012f047>] ? worker_thread+0x87/0xf0
[ 113.922240] [<c0132b00>] ? autoremove_wake_function+0x0/0x50
[ 113.922240] [<c012efc0>] ? worker_thread+0x0/0xf0
[ 113.922240] [<c013280f>] ? kthread+0x3f/0x80
[ 113.922240] [<c01327d0>] ? kthread+0x0/0x80
[ 113.922240] [<c01040d7>] ? kernel_thread_helper+0x7/0x10
[ 113.922240] Code: 43 54 89 73 54 39 c6 74 11 89 d9 ba 01 00 00 00 b8 40 68 aa df e8 3e 35 69 e0 89 f8 e8 77 fd 85 e0 31 c0 83 c4 10 5b 5e 5f 5d c3 <0f> 0b eb fe 89 f6 8d bc 27 00 00 00 00 be f4 4d aa df bb 5f 01
[ 113.922240] EIP: [<dfaa4683>] rfkill_force_state+0x53/0x90 [rfkill] SS:ESP 0068:d8d7af24
[ 113.924700] ---[ end trace 0e404eb40cadd5f0 ]---
[ 116.418566] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 116.537421] eth1: New link status: Connected (0001)
[ 615.868633] PM: Syncing filesystems ... done.
[ 615.892089] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 615.897615] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 615.898275] Suspending console(s) (use no_console_suspend to debug)
[ 615.903562] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 616.430846] sd 0:0:0:0: [sda] Stopping disk
[ 617.125438] e100 0000:00:0a.0: PCI INT A disabled
[ 617.182023] ALI 5451 0000:00:06.0: PCI INT A disabled
[ 617.193773] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
[ 617.950832] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 617.960140] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 617.975868] ACPI: Preparing to enter system sleep state S3
[ 617.975868] Back to C!
[ 617.987166] ACPI: Waking up from system sleep state S3
[ 618.004377] pci 0000:00:01.0: setting latency timer to 64
[ 618.013412] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 618.013443] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x500001ff, writing 0x5000010b)
[ 618.068722] usb usb1: root hub lost power or was reset
[ 618.080082] pata_ali 0000:00:04.0: restoring config space at offset 0x1 (was 0x2900001, writing 0x2900005)
[ 618.080120] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 618.080520] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 618.080545] ALI 5451 0000:00:06.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x1802010b)
[ 618.080729] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 618.080753] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 618.371841] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001)
[ 618.383387] e100 0000:00:0a.0: restoring config space at offset 0xf (was 0x380801ff, writing 0x3808010b)
[ 618.383431] e100 0000:00:0a.0: restoring config space at offset 0x1 (was 0x2900003, writing 0x2900007)
[ 618.410301] yenta_cardbus 0000:00:10.0: restoring config space at offset 0x6 (was 0x50200, writing 0xb0050200)
[ 618.660820] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[ 618.660830] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out
[ 618.667319] ata2.00: configured for UDMA/33
[ 619.323782] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 619.404234] eth1: Hardware identity 0005:0002:0001:0002
[ 619.404345] eth1: Station identity 001f:0001:0006:000e
[ 619.404356] eth1: Firmware determined as Lucent/Agere 6.14
[ 619.404369] eth1: Attempting to download firmware agere_sta_fw.bin
[ 619.404398] hermes_dld: AUX enable returned 0
[ 619.405440] hermes_dld: AUX disable returned 0
[ 619.405448] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 619.405454] eth1: Read PDA returned 0
[ 619.405464] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 620.257118] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[ 620.257128] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out
[ 620.272387] ata1.00: configured for UDMA/33
[ 620.272634] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 620.272723] sd 0:0:0:0: [sda] Write Protect is off
[ 620.272733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 620.272861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 679.403515] eth1: Cannot find firmware agere_sta_fw.bin
[ 679.403593] eth1: Hardware identity 0005:0002:0001:0002
[ 679.403704] eth1: Station identity 001f:0001:0006:000e
[ 679.403714] eth1: Firmware determined as Lucent/Agere 6.14
[ 679.403721] eth1: Ad-hoc demo mode supported
[ 679.403727] eth1: IEEE standard IBSS ad-hoc mode supported
[ 679.403733] eth1: WEP supported, 104-bit key
[ 679.403856] eth1: MAC address 00:02:2d:26:95:6c
[ 679.403962] eth1: Station name "HERMES I"
[ 679.404529] eth1: ready
[ 679.405117] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f
[ 679.676707] pci 0000:00:12.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 679.676785] pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 679.680310] sd 0:0:0:0: [sda] Starting disk
[ 680.109195] Restarting tasks ... done.
[ 681.184812] eth1: New link status: Disconnected (0002)
[ 688.967595] eth1: New link status: Disconnected (0002)
[ 936.423228] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 941.890025] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 941.890557] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 941.975842] eth1: Hardware identity 0005:0002:0001:0002
[ 941.976011] eth1: Station identity 001f:0001:0006:000e
[ 941.976032] eth1: Firmware determined as Lucent/Agere 6.14
[ 941.976061] eth1: Attempting to download firmware agere_sta_fw.bin
[ 941.976104] hermes_dld: AUX enable returned 0
[ 941.977202] hermes_dld: AUX disable returned 0
[ 941.977217] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 941.977231] eth1: Read PDA returned 0
[ 941.977251] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 942.100296] hermes_dld: AUX enable returned 0
[ 942.100349] hermes_dld: Enabling volatile, EP 0x000f8000
[ 942.101404] hermes_dld: PROGRAM_ENABLE returned 0
[ 942.101418] eth1: Program init returned 0
[ 942.101435] hermes_dld: Programming block of length 60416 to address 0x001f0000
[ 942.149611] hermes_dld: Programming block of length 4096 to address 0x001ef000
[ 942.152939] eth1: Program returned 0
[ 942.152959] hermes_dld: Found record 0x0003 at d8fba41c
[ 942.152992] hermes_dld: Found record 0x0005 at d8fba4a8
[ 942.153024] hermes_dld: Found record 0x0008 at d8fba4d2
[ 942.153052] hermes_dld: Found record 0x0007 at d8fba4c4
[ 942.153083] hermes_dld: Found record 0x0006 at d8fba4b6
[ 942.153116] hermes_dld: Found record 0x0110 at d8fba59a
[ 942.153161] hermes_dld: Found record 0x0120 at d8fba5ba
[ 942.153213] hermes_dld: Found record 0x0130 at d8fba5da
[ 942.153259] hermes_dld: Found record 0x0140 at d8fba5fa
[ 942.153282] hermes_dld: Found record 0x0150 at d8fba602
[ 942.153306] hermes_dld: Using default record 0x0160 at dfb6bba0
[ 942.153352] hermes_dld: Found record 0x0101 at d8fba546
[ 942.153378] hermes_dld: Found record 0x0103 at d8fba55c
[ 942.153412] hermes_dld: Found record 0x0104 at d8fba56c
[ 942.153434] hermes_dld: Found record 0x0105 at d8fba572
[ 942.153454] hermes_dld: Found record 0x0105 at d8fba572
[ 942.153528] hermes_dld: Found record 0x0105 at d8fba572
[ 942.153549] hermes_dld: Found record 0x0107 at d8fba57e
[ 942.153570] hermes_dld: Found record 0x0109 at d8fba58c
[ 942.153600] hermes_dld: Using default record 0x0161 at dfb6bbc0
[ 942.153864] eth1: Apply PDA returned 0
[ 942.153937] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000, r2 0x0000
[ 942.153977] hermes_dld: AUX disable returned 0
[ 942.164622] eth1: Program end returned 0
[ 942.164639] eth1: hermes_present returned 1
[ 942.165445] eth1: Hardware identity 0005:0002:0001:0002
[ 942.165585] eth1: Station identity 001f:0002:0009:0030
[ 942.165602] eth1: Firmware determined as Lucent/Agere 9.48
[ 942.165616] eth1: Ad-hoc demo mode supported
[ 942.165630] eth1: IEEE standard IBSS ad-hoc mode supported
[ 942.165643] eth1: WEP supported, 104-bit key
[ 942.165666] eth1: WPA-PSK supported
[ 942.186555] eth1: MAC address 00:02:2d:26:95:6c
[ 942.186718] eth1: Station name "HERMES I"
[ 942.187421] eth1: ready
[ 942.188176] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f
[ 943.256450] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 943.428503] eth1: New link status: Connected (0001)
Download attachment "signature.asc " of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists