| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1225320016-21803-16-git-send-email-greg@kroah.com>
Date: Wed, 29 Oct 2008 15:39:43 -0700
From: Greg KH <greg@...ah.com>
To: linux-kernel@...r.kernel.org
Cc: Pekka Enberg <penberg@...helsinki.fi>,
Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH 16/49] Staging: w35und: remove true/false boolean macros
From: Pekka Enberg <penberg@...helsinki.fi>
Use the kernel built-in true and false boolean values instead of duplicating
them in the driver code.
Signed-off-by: Pekka Enberg <penberg@...helsinki.fi>
Acked-by: Pavel Machek <pavel@...e.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/staging/winbond/linux/common.h | 17 -------
drivers/staging/winbond/linux/wb35reg.c | 70 ++++++++++++++--------------
drivers/staging/winbond/linux/wb35rx.c | 2 +-
drivers/staging/winbond/linux/wb35tx.c | 14 +++---
drivers/staging/winbond/mds.c | 31 ++++++-------
drivers/staging/winbond/mlmetxrx.c | 16 +++---
drivers/staging/winbond/mto.c | 12 +++---
drivers/staging/winbond/phy_calibration.c | 6 +-
drivers/staging/winbond/wbhal.c | 14 +++---
drivers/staging/winbond/wblinux.c | 20 ++++----
10 files changed, 92 insertions(+), 110 deletions(-)
diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h
index 64bd1c7..42c23a8 100644
--- a/drivers/staging/winbond/linux/common.h
+++ b/drivers/staging/winbond/linux/common.h
@@ -45,23 +45,6 @@
#define FAILURE 0
-#ifndef true
-#define true 1
-#endif
-
-#ifndef false
-#define false 0
-#endif
-
-// PD43 20021108
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
#define STATUS_MEDIA_CONNECT 1
#define STATUS_MEDIA_DISCONNECT 0
diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c
index 191322d..47b5a7d 100644
--- a/drivers/staging/winbond/linux/wb35reg.c
+++ b/drivers/staging/winbond/linux/wb35reg.c
@@ -2,8 +2,8 @@
extern void phy_calibration_winbond(hw_data_t *phw_data, u32 frequency);
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
// RegisterNo : start base
// pRegisterData : data point
// NumberOfData : number of register data
@@ -21,7 +21,7 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 N
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
// Trying to use burst write function if use new hardware
UrbSize = sizeof(struct wb35_reg_queue) + DataSize + sizeof(struct usb_ctrlrequest);
@@ -58,15 +58,15 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 N
// Start EP0VM
Wb35Reg_EP0VM_start(pHwData);
- return TRUE;
+ return true;
} else {
if (urb)
usb_free_urb(urb);
if (reg_queue)
kfree(reg_queue);
- return FALSE;
+ return false;
}
- return FALSE;
+ return false;
}
void
@@ -112,8 +112,8 @@ Wb35Reg_Update(phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue)
}
}
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
unsigned char
Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
{
@@ -122,7 +122,7 @@ Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
RegisterValue = cpu_to_le32(RegisterValue);
@@ -150,14 +150,14 @@ Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
#endif
pHwData->SurpriseRemove = 1; // 20060704.2
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
unsigned char
Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
{
@@ -170,7 +170,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
// update the register by send urb request------------------------------------
UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
@@ -180,7 +180,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
reg_queue->DIRECT = 1;// burst write register
reg_queue->INDEX = RegisterNo;
reg_queue->VALUE = cpu_to_le32(RegisterValue);
- reg_queue->RESERVED_VALID = FALSE;
+ reg_queue->RESERVED_VALID = false;
dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE;
dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode
@@ -205,19 +205,19 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )
// Start EP0VM
Wb35Reg_EP0VM_start(pHwData);
- return TRUE;
+ return true;
} else {
if (urb)
usb_free_urb(urb);
kfree(reg_queue);
- return FALSE;
+ return false;
}
}
//This command will be executed with a user defined value. When it completes,
//this value is useful. For example, hal_set_current_channel will use it.
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
unsigned char
Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue,
s8 *pValue, s8 Len)
@@ -230,7 +230,7 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
// update the register by send urb request------------------------------------
UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
@@ -242,7 +242,7 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register
reg_queue->VALUE = cpu_to_le32(RegisterValue);
//NOTE : Users must guarantee the size of value will not exceed the buffer size.
memcpy(reg_queue->RESERVED, pValue, Len);
- reg_queue->RESERVED_VALID = TRUE;
+ reg_queue->RESERVED_VALID = true;
dr = (struct usb_ctrlrequest *)((u8 *)reg_queue + sizeof(struct wb35_reg_queue));
dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE;
dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode
@@ -265,17 +265,17 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register
// Start EP0VM
Wb35Reg_EP0VM_start(pHwData);
- return TRUE;
+ return true;
} else {
if (urb)
usb_free_urb(urb);
kfree(reg_queue);
- return FALSE;
+ return false;
}
}
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
// pRegisterValue : It must be a resident buffer due to asynchronous read register.
unsigned char
Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
@@ -286,7 +286,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
// Read the register by send usb message------------------------------------
@@ -317,14 +317,14 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
#endif
pHwData->SurpriseRemove = 1; // 20060704.2
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
-// TRUE : read command process successfully
-// FALSE : register not support
+// true : read command process successfully
+// false : register not support
// pRegisterValue : It must be a resident buffer due to asynchronous read register.
unsigned char
Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
@@ -337,7 +337,7 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
// Module shutdown
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
// update the variable by send Urb to read register ------------------------------------
UrbSize = sizeof(struct wb35_reg_queue) + sizeof(struct usb_ctrlrequest);
@@ -371,12 +371,12 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )
// Start EP0VM
Wb35Reg_EP0VM_start( pHwData );
- return TRUE;
+ return true;
} else {
if (urb)
usb_free_urb( urb );
kfree(reg_queue);
- return FALSE;
+ return false;
}
}
@@ -629,9 +629,9 @@ unsigned char Wb35Reg_initial(phw_data_t pHwData)
Dxx_initial(pHwData);
if (pHwData->SurpriseRemove)
- return FALSE;
+ return false;
else
- return TRUE; // Initial fail
+ return true; // Initial fail
}
//===================================================================================
diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c
index 1326996..9593a60 100644
--- a/drivers/staging/winbond/linux/wb35rx.c
+++ b/drivers/staging/winbond/linux/wb35rx.c
@@ -326,7 +326,7 @@ u16 Wb35Rx_indicate(phw_data_t pHwData)
// Reclaim resource
pWb35Rx->RxOwner[ RxBufferId ] = 1;
- } while(TRUE);
+ } while (true);
return stmp2;
}
diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c
index 9c928ee..020c52d 100644
--- a/drivers/staging/winbond/linux/wb35tx.c
+++ b/drivers/staging/winbond/linux/wb35tx.c
@@ -17,7 +17,7 @@ Wb35Tx_get_tx_buffer(phw_data_t pHwData, u8 **pBuffer)
PWB35TX pWb35Tx = &pHwData->Wb35Tx;
*pBuffer = pWb35Tx->TxBuffer[0];
- return TRUE;
+ return true;
}
void Wb35Tx_start(phw_data_t pHwData)
@@ -136,16 +136,16 @@ unsigned char Wb35Tx_initial(phw_data_t pHwData)
pWb35Tx->Tx4Urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!pWb35Tx->Tx4Urb)
- return FALSE;
+ return false;
pWb35Tx->Tx2Urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!pWb35Tx->Tx2Urb)
{
usb_free_urb( pWb35Tx->Tx4Urb );
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
//======================================================
@@ -193,12 +193,12 @@ void Wb35Tx_destroy(phw_data_t pHwData)
void Wb35Tx_CurrentTime(phw_data_t pHwData, u32 TimeCount)
{
PWB35TX pWb35Tx = &pHwData->Wb35Tx;
- unsigned char Trigger = FALSE;
+ unsigned char Trigger = false;
if (pWb35Tx->TxTimer > TimeCount)
- Trigger = TRUE;
+ Trigger = true;
else if (TimeCount > (pWb35Tx->TxTimer+500))
- Trigger = TRUE;
+ Trigger = true;
if (Trigger) {
pWb35Tx->TxTimer = TimeCount;
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 78e33d0..8d3c8ad 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -18,7 +18,7 @@ Mds_initial(struct wb35_adapter * adapter)
{
PMDS pMds = &adapter->Mds;
- pMds->TxPause = FALSE;
+ pMds->TxPause = false;
pMds->TxRTSThreshold = DEFAULT_RTSThreshold;
pMds->TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
@@ -43,7 +43,7 @@ Mds_Tx(struct wb35_adapter * adapter)
u8 *XmitBufAddress;
u16 XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold;
u8 FillIndex, TxDesIndex, FragmentCount, FillCount;
- unsigned char BufferFilled = FALSE, MICAdd = 0;
+ unsigned char BufferFilled = false, MICAdd = 0;
if (pMds->TxPause)
@@ -87,7 +87,7 @@ Mds_Tx(struct wb35_adapter * adapter)
//
// Start transmitting
//
- BufferFilled = TRUE;
+ BufferFilled = true;
/* Leaves first u8 intact */
memset((u8 *)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1);
@@ -130,10 +130,10 @@ Mds_Tx(struct wb35_adapter * adapter)
#ifdef _IBSS_BEACON_SEQ_STICK_
if ((XmitBufAddress[ DOT_11_DA_OFFSET+8 ] & 0xfc) != MAC_SUBTYPE_MNGMNT_PROBE_REQUEST) // +8 for USB hdr
#endif
- pMds->TxToggle = TRUE;
+ pMds->TxToggle = true;
// Get packet to transmit completed, 1:TESTSTA 2:MLME 3: Ndis data
- MLME_SendComplete(adapter, 0, TRUE);
+ MLME_SendComplete(adapter, 0, true);
// Software TSC count 20060214
pMds->TxTsc++;
@@ -141,7 +141,7 @@ Mds_Tx(struct wb35_adapter * adapter)
pMds->TxTsc_2++;
FillCount++; // 20060928
- } while (HAL_USB_MODE_BURST(pHwData)); // End of multiple MSDU copy loop. FALSE = single TRUE = multiple sending
+ } while (HAL_USB_MODE_BURST(pHwData)); // End of multiple MSDU copy loop. false = single true = multiple sending
// Move to the next one, if necessary
if (BufferFilled) {
@@ -156,14 +156,14 @@ Mds_Tx(struct wb35_adapter * adapter)
pMds->TxFillIndex++;
pMds->TxFillIndex %= MAX_USB_TX_BUFFER_NUMBER;
- BufferFilled = FALSE;
+ BufferFilled = false;
} else
break;
if (!PacketSize) // No more pk for transmitting
break;
- } while(TRUE);
+ } while(true);
//
// Start to send by lower module
@@ -181,7 +181,7 @@ Mds_SendComplete(struct wb35_adapter * adapter, PT02_DESCRIPTOR pT02)
PMDS pMds = &adapter->Mds;
phw_data_t pHwData = &adapter->sHwData;
u8 PacketId = (u8)pT02->T02_Tx_PktID;
- unsigned char SendOK = TRUE;
+ unsigned char SendOK = true;
u8 RetryCount, TxRate;
if (pT02->T02_IgnoreResult) // Don't care the result
@@ -192,7 +192,7 @@ Mds_SendComplete(struct wb35_adapter * adapter, PT02_DESCRIPTOR pT02)
TxRate = pMds->TxRate[ PacketId ][ 0 ];
RetryCount = (u8)pT02->T02_MPDU_Cnt;
if (pT02->value & FLAG_ERROR_TX_MASK) {
- SendOK = FALSE;
+ SendOK = false;
if (pT02->T02_transmit_abort || pT02->T02_out_of_MaxTxMSDULiftTime) {
//retry error
@@ -435,11 +435,10 @@ Mds_DurationSet( struct wb35_adapter * adapter, PDESCRIPTOR pDes, u8 *buffer
PT01_DESCRIPTOR pT01;
u16 Duration, NextBodyLen, OffsetSize;
u8 Rate, i;
- unsigned char CTS_on = FALSE, RTS_on = FALSE;
+ unsigned char CTS_on = false, RTS_on = false;
PT00_DESCRIPTOR pNextT00;
u16 BodyLen = 0;
- unsigned char boGroupAddr = FALSE;
-
+ unsigned char boGroupAddr = false;
OffsetSize = pDes->FragmentThreshold + 32 + 3;
OffsetSize &= ~0x03;
@@ -452,7 +451,7 @@ Mds_DurationSet( struct wb35_adapter * adapter, PDESCRIPTOR pDes, u8 *buffer
pNextT00 = (PT00_DESCRIPTOR)(buffer+OffsetSize);
if( buffer[ DOT_11_DA_OFFSET+8 ] & 0x1 ) // +8 for USB hdr
- boGroupAddr = TRUE;
+ boGroupAddr = true;
//========================================
// Set RTS/CTS mechanism
@@ -467,13 +466,13 @@ Mds_DurationSet( struct wb35_adapter * adapter, PDESCRIPTOR pDes, u8 *buffer
BodyLen += 4; //CRC
if( BodyLen >= CURRENT_RTS_THRESHOLD )
- RTS_on = TRUE; // Using RTS
+ RTS_on = true; // Using RTS
else
{
if( pT01->T01_modulation_type ) // Is using OFDM
{
if( CURRENT_PROTECT_MECHANISM ) // Is using protect
- CTS_on = TRUE; // Using CTS
+ CTS_on = true; // Using CTS
}
}
}
diff --git a/drivers/staging/winbond/mlmetxrx.c b/drivers/staging/winbond/mlmetxrx.c
index 341e4b2..eab562a 100644
--- a/drivers/staging/winbond/mlmetxrx.c
+++ b/drivers/staging/winbond/mlmetxrx.c
@@ -23,16 +23,16 @@ void MLMEResetTxRx(struct wb35_adapter * adapter)
// Reset the interface between MDS and MLME
for (i = 0; i < MAX_NUM_TX_MMPDU; i++)
- adapter->sMlmeFrame.TxMMPDUInUse[i] = FALSE;
+ adapter->sMlmeFrame.TxMMPDUInUse[i] = false;
for (i = 0; i < MAX_NUM_RX_MMPDU; i++)
- adapter->sMlmeFrame.SaveRxBufSlotInUse[i] = FALSE;
+ adapter->sMlmeFrame.SaveRxBufSlotInUse[i] = false;
adapter->sMlmeFrame.wNumRxMMPDUInMLME = 0;
adapter->sMlmeFrame.wNumRxMMPDUDiscarded = 0;
adapter->sMlmeFrame.wNumRxMMPDU = 0;
adapter->sMlmeFrame.wNumTxMMPDUDiscarded = 0;
adapter->sMlmeFrame.wNumTxMMPDU = 0;
- adapter->sLocalPara.boCCAbusy = FALSE;
+ adapter->sLocalPara.boCCAbusy = false;
adapter->sLocalPara.iPowerSaveMode = PWR_ACTIVE; // Power active
}
@@ -59,13 +59,13 @@ u8 *MLMEGetMMPDUBuffer(struct wb35_adapter * adapter)
u8 *returnVal;
for (i = 0; i< MAX_NUM_TX_MMPDU; i++) {
- if (adapter->sMlmeFrame.TxMMPDUInUse[i] == FALSE)
+ if (adapter->sMlmeFrame.TxMMPDUInUse[i] == false)
break;
}
if (i >= MAX_NUM_TX_MMPDU) return NULL;
returnVal = (u8 *)&(adapter->sMlmeFrame.TxMMPDU[i]);
- adapter->sMlmeFrame.TxMMPDUInUse[i] = TRUE;
+ adapter->sMlmeFrame.TxMMPDUInUse[i] = true;
return returnVal;
}
@@ -77,7 +77,7 @@ u8 MLMESendFrame(struct wb35_adapter * adapter, u8 *pMMPDU, u16 len, u8 DataType
{
if (adapter->sMlmeFrame.IsInUsed != PACKET_FREE_TO_USE) {
adapter->sMlmeFrame.wNumTxMMPDUDiscarded++;
- return FALSE;
+ return false;
}
adapter->sMlmeFrame.IsInUsed = PACKET_COME_FROM_MLME;
@@ -93,7 +93,7 @@ u8 MLMESendFrame(struct wb35_adapter * adapter, u8 *pMMPDU, u16 len, u8 DataType
// Transmit NDIS packet
Mds_Tx(adapter);
- return TRUE;
+ return true;
}
void
@@ -123,7 +123,7 @@ void MLMEfreeMMPDUBuffer(struct wb35_adapter * adapter, s8 *pData)
break;
}
if (adapter->sMlmeFrame.TxMMPDUInUse[i])
- adapter->sMlmeFrame.TxMMPDUInUse[i] = FALSE;
+ adapter->sMlmeFrame.TxMMPDUInUse[i] = false;
else {
// Something wrong
// PD43 Add debug code here???
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 70d2a50..f53db93 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -208,7 +208,7 @@ static int TotalTxPktRetry = 0;
static int TxPktPerAnt[3] = {0,0,0};
static int RXRSSIANT[3] ={-70,-70,-70};
static int TxPktRetryPerAnt[3] = {0,0,0};
-//static int TxDominateFlag=FALSE;
+//static int TxDominateFlag=false;
static u8 old_antenna[4]={1 ,0 ,1 ,0};
static int retryrate_rec[MTO_MAX_DATA_RATE_LEVELS];//this record the retry rate at different data rate
@@ -236,7 +236,7 @@ static RSSI2RATE RSSI2RateTbl[RSSI2RATE_SIZE] =
static u8 untogglecount;
static u8 last_rate_ant; //this is used for antenna backoff-hh
-u8 boSparseTxTraffic = FALSE;
+u8 boSparseTxTraffic = false;
void MTO_Init(MTO_FUNC_INPUT);
void AntennaToggleInitiator(MTO_FUNC_INPUT);
@@ -569,9 +569,9 @@ unsigned char TxDominate(int index)
tmp = TxPktPerAnt[index] + DTO_Rx_Info[0][index];
if(Divide(TxPktPerAnt[index]*100, tmp) > 40)
- return TRUE;
+ return true;
else
- return FALSE;
+ return false;
}
unsigned char CmpTxRetryRate(int index1, int index2)
@@ -584,9 +584,9 @@ unsigned char CmpTxRetryRate(int index1, int index2)
#endif
if(tx_retry_rate1 > tx_retry_rate2)
- return TRUE;
+ return true;
else
- return FALSE;
+ return false;
}
void GetFreshAntennaData(MTO_FUNC_INPUT)
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index e83c2f2..b77c843 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -1682,7 +1682,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
msleep(30); // 20060612.1.a
if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl) ) // 20060718.1 modify
- return FALSE;
+ return false;
PHY_DEBUG(("[CAL] MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
@@ -1727,9 +1727,9 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
}
if( iq_mag_0_tx>=700 && iq_mag_0_tx<=1750 )
- return TRUE;
+ return true;
else
- return FALSE;
+ return false;
}
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index c8da1a3..69dcedf 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -56,19 +56,19 @@ u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter)
// Try to make sure the EEPROM contain
SoftwareSet >>= 8;
if( SoftwareSet != 0x82 )
- return FALSE;
+ return false;
#endif
Wb35Rx_start( pHwData );
Wb35Tx_EP2VM_start( pHwData );
- return TRUE;
+ return true;
}
}
}
pHwData->SurpriseRemove = 1;
- return FALSE;
+ return false;
}
@@ -312,7 +312,7 @@ u8 hal_get_accept_beacon( phw_data_t pHwData )
unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa )
{
// Not implement yet
- return TRUE;
+ return true;
}
void hal_stop( phw_data_t pHwData )
@@ -335,9 +335,9 @@ unsigned char hal_idle(phw_data_t pHwData)
PWBUSB pWbUsb = &pHwData->WbUsb;
if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) )
- return FALSE;
+ return false;
- return TRUE;
+ return true;
}
//---------------------------------------------------------------------------------------------------
void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min )
@@ -868,6 +868,6 @@ unsigned char hal_set_LED(phw_data_t pHwData, u32 Mode) // 20061108 for WPS led
pHwData->LED_Blinking = 0;
pHwData->LED_control = Mode;
OS_TIMER_SET( &pHwData->LEDTimer, 10 ); // 20060623
- return TRUE;
+ return true;
}
diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c
index 89f9f7c..460f42a 100644
--- a/drivers/staging/winbond/wblinux.c
+++ b/drivers/staging/winbond/wblinux.c
@@ -49,7 +49,7 @@ WBLINUX_Initial(struct wb35_adapter * adapter)
{
spin_lock_init( &adapter->SpinLock );
spin_lock_init( &adapter->AtomicSpinLock );
- return TRUE;
+ return true;
}
void
@@ -114,7 +114,7 @@ void
WbWlanHalt(struct wb35_adapter *adapter)
{
//---------------------
- adapter->sLocalPara.ShutDowned = TRUE;
+ adapter->sLocalPara.ShutDowned = true;
Mds_Destroy(adapter);
@@ -153,7 +153,7 @@ WbWLanInitialize(struct wb35_adapter *adapter)
hal_set_phy_type( &adapter->sHwData, RF_WB_242_1 );
adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
psLOCAL->bPreambleMode = AUTO_MODE;
- adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
+ adapter->sLocalPara.RadioOffStatus.boSwRadioOff = false;
pHwData = &adapter->sHwData;
hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
@@ -168,11 +168,11 @@ WbWLanInitialize(struct wb35_adapter *adapter)
}
// Initial Software variable
- adapter->sLocalPara.ShutDowned = FALSE;
+ adapter->sLocalPara.ShutDowned = false;
//added by ws for wep key error detection
- adapter->sLocalPara.bWepKeyError= FALSE;
- adapter->sLocalPara.bToSelfPacketReceived = FALSE;
+ adapter->sLocalPara.bWepKeyError= false;
+ adapter->sLocalPara.bToSelfPacketReceived = false;
adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
// Initial USB hal
@@ -192,9 +192,9 @@ WbWLanInitialize(struct wb35_adapter *adapter)
}
// Get Software setting flag from hal
- adapter->sLocalPara.boAntennaDiversity = FALSE;
+ adapter->sLocalPara.boAntennaDiversity = false;
if (hal_software_set(pHwData) & 0x00000001)
- adapter->sLocalPara.boAntennaDiversity = TRUE;
+ adapter->sLocalPara.boAntennaDiversity = true;
//
// For TS module
@@ -245,7 +245,7 @@ WbWLanInitialize(struct wb35_adapter *adapter)
hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
//set a tx power for reference.....
// sme_set_tx_power_level(adapter, 12); FIXME?
- return TRUE;
+ return true;
error:
switch (InitStep) {
@@ -258,7 +258,7 @@ error:
case 0: break;
}
- return FALSE;
+ return false;
}
void WBLINUX_ConnectStatus(struct wb35_adapter * adapter, u32 flag)
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists