4M num_reg: 2 lose cover RAM: 7M gran_size: 8M chunk_size: 128M num_reg: 2 lose cover RAM: 7M gran_size: 8M chunk_size: 256M num_reg: 2 lose cover RAM: 7M gran_size: 8M chunk_size: 512M num_reg: 2 lose cover RAM: 7M gran_size: 8M chunk_size: 1G num_reg: 2 lose cover RAM: 7M gran_size: 8M chunk_size: 2G num_reg: 2 lose cover RAM: 7M gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 15M gran_size: 16M chunk_size: 32M num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 64M num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 128M num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 256M num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 512M num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 1G num_reg: 2 lose cover RAM: 15M gran_size: 16M chunk_size: 2G num_reg: 2 lose cover RAM: 15M gran_size: 32M chunk_size: 32M num_reg: 6 lose cover RAM: 31M gran_size: 32M chunk_size: 64M num_reg: 2 lose cover RAM: 31M gran_size: 32M chunk_size: 128M num_reg: 2 lose cover RAM: 31M gran_size: 32M chunk_size: 256M num_reg: 2 lose cover RAM: 31M gran_size: 32M chunk_size: 512M num_reg: 2 lose cover RAM: 31M gran_size: 32M chunk_size: 1G num_reg: 2 lose cover RAM: 31M gran_size: 32M chunk_size: 2G num_reg: 2 lose cover RAM: 31M gran_size: 64M chunk_size: 64M num_reg: 5 lose cover RAM: 63M gran_size: 64M chunk_size: 128M num_reg: 2 lose cover RAM: 63M gran_size: 64M chunk_size: 256M num_reg: 2 lose cover RAM: 63M gran_size: 64M chunk_size: 512M num_reg: 2 lose cover RAM: 63M gran_size: 64M chunk_size: 1G num_reg: 2 lose cover RAM: 63M gran_size: 64M chunk_size: 2G num_reg: 2 lose cover RAM: 63M gran_size: 128M chunk_size: 128M num_reg: 4 lose cover RAM: 127M gran_size: 128M chunk_size: 256M num_reg: 2 lose cover RAM: 127M gran_size: 128M chunk_size: 512M num_reg: 2 lose cover RAM: 127M gran_size: 128M chunk_size: 1G num_reg: 2 lose cover RAM: 127M gran_size: 128M chunk_size: 2G num_reg: 2 lose cover RAM: 127M gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 255M gran_size: 256M chunk_size: 512M num_reg: 2 lose cover RAM: 255M gran_size: 256M chunk_size: 1G num_reg: 2 lose cover RAM: 255M gran_size: 256M chunk_size: 2G num_reg: 2 lose cover RAM: 255M gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 511M gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 511M gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 511M gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1023M gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1023M gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2047M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 2M num_reg: 2 lose RAM: 0G range0: 0000000000000000 - 0000000080000000 Setting variable MTRR 0, base: 0GB, range: 2GB, type WB hole: 000000007ff00000 - 0000000080000000 Setting variable MTRR 1, base: 2047MB, range: 1MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000008000 (usable) modified: 0000000000008000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000092000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 0000000000100000 - 000000007fe5a800 (usable) modified: 000000007fe5a800 - 0000000080000000 (reserved) modified: 00000000f8000000 - 00000000fc000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed18000 - 00000000fed1c000 (reserved) modified: 00000000fed20000 - 00000000fed90000 (reserved) modified: 00000000feda0000 - 00000000feda6000 (reserved) modified: 00000000fee00000 - 00000000fee10000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe5a000 page 4k kernel direct mapping tables up to 7fe5a000 @ 10000-14000 last_map_addr: 7fe5a000 end: 7fe5a000 ACPI: RSDP 000FBB10, 0024 (r2 DELL ) ACPI: XSDT 7FE5D200, 0064 (r1 DELL M08 27D80715 ASL 61) ACPI: FACP 7FE5D09C, 00F4 (r4 DELL M08 27D80715 ASL 61) ACPI: DSDT 7FE5D800, 63EA (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 7FE6C000, 0040 ACPI: HPET 7FE5D300, 0038 (r1 DELL M08 1 ASL 61) ACPI: APIC 7FE5D400, 0068 (r1 DELL M08 27D80715 ASL 47) ACPI: ASF! 7FE5D000, 007E (r32 DELL M08 27D80715 ASL 61) ACPI: MCFG 7FE5D3C0, 003E (r16 DELL M08 27D80715 ASL 61) ACPI: TCPA 7FE5D700, 0032 (r1 0 ASL 0) ACPI: SLIC 7FE5D49C, 0176 (r1 DELL M08 27D80715 ASL 61) ACPI: SSDT 7FE5BA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: DMI detected: Dell Latitude D830 ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007fe5a000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000b019f0] TEXT DATA BSS ==> [0000200000 - 0000b019f0] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x00000008 0: 0x00000010 -> 0x00000092 0: 0x00000100 -> 0x0007fe5a On node 0 totalpages: 523743 DMA zone: 56 pages used for memmap DMA zone: 2407 pages reserved DMA zone: 1510 pages, LIFO batch:0 DMA32 zone: 7107 pages used for memmap DMA32 zone: 512663 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 0000000000008000 - 0000000000010000 PM: Registered nosave memory: 0000000000092000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) PERCPU: Allocating 57344 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514173 Kernel command line: root=/dev/sda2 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1795.490 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Scanning for low memory corruption every 60 seconds Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2053352k/2095464k available (5043k kernel code, 41232k reserved, 2533k data, 516k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.60 BogoMIPS (lpj=5984966) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3592.64 BogoMIPS (lpj=5985028) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7184.24 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1400 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - B3, should be 57 [20080926] ACPI: SSDT 7FE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xf1bf0000-0xf1bfffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.5: bridge 32bit mmio: [0xf1b00000-0xf1bfffff] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:03:01.0: supports D1 D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.4: reg 10 32bit mmio: [0xf1aff000-0xf1afffff] pci 0000:03:01.4: reg 14 32bit mmio: [0xf1afe800-0xf1afefff] pci 0000:03:01.4: supports D1 D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf1a00000-0xf1afffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: WMI: Mapper loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0b: ioport range 0x900-0x97f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0xf400-0xf4fe has been reserved system 00:0c: ioport range 0x1080-0x10bf has been reserved system 00:0c: ioport range 0x10c0-0x10df has been reserved system 00:0c: ioport range 0x809-0x809 has been reserved system 00:0d: iomem range 0x0-0x9efff could not be reserved system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff has been reserved system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved system 00:0d: iomem range 0x7fe5a800-0x7fefffff could not be reserved system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 pci 0000:03:01.0: IO window: 0x002000-0x0020ff pci 0000:03:01.0: IO window: 0x002400-0x0024ff pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:03:01.0: enabling device (0000 -> 0003) pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 io port: [0xe000-0xefff] bus: 01 index 1 mmio: [0xf2000000-0xf6efffff] bus: 01 index 2 mmio: [0xe0000000-0xefffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 0b index 0 mmio: [0x0-0x0] bus: 0b index 1 mmio: [0x0-0x0] bus: 0b index 2 mmio: [0x0-0x0] bus: 0b index 3 mmio: [0x0-0x0] bus: 0c index 0 mmio: [0x0-0x0] bus: 0c index 1 mmio: [0xf1f00000-0xf1ffffff] bus: 0c index 2 mmio: [0x0-0x0] bus: 0c index 3 mmio: [0x0-0x0] bus: 0d index 0 io port: [0xd000-0xdfff] bus: 0d index 1 mmio: [0xf1c00000-0xf1efffff] bus: 0d index 2 mmio: [0xf0000000-0xf01fffff] bus: 0d index 3 mmio: [0x0-0x0] bus: 09 index 0 mmio: [0x0-0x0] bus: 09 index 1 mmio: [0xf1b00000-0xf1bfffff] bus: 09 index 2 mmio: [0x0-0x0] bus: 09 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0x2000-0x2fff] bus: 03 index 1 mmio: [0xf1a00000-0xf1afffff] bus: 03 index 2 mmio: [0x88000000-0x8bffffff] bus: 03 index 3 io port: [0x00-0xffff] bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] bus: 04 index 0 io port: [0x2000-0x20ff] bus: 04 index 1 io port: [0x2400-0x24ff] bus: 04 index 2 mmio: [0x88000000-0x8bffffff] bus: 04 index 3 mmio: [0x8c000000-0x8fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 NET: Registered protocol family 1 Microcode Update Driver: v2.00 audit: initializing netlink socket (disabled) type=2000 audit(1225384324.514:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.10) msgmni has been set to 4011 alg: No test for stdrng (krng) alg: No test for stdrng (ansi_cprng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.0: Performing full reset pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.1: Performing full reset pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.2: Performing full reset pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie02: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 317 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pcieport-driver 0000:00:1c.5: irq 315 for MSI/MSI-X pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de042b nvidiafb: unknown NV_ARCH ACPI: AC Adapter [AC] (on-line) ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SBTN] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input4 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input5 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: SSDT 7FE5C538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7FE5BECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7FE5C4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (58 C) i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) Linux agpgart interface v0.103 ipmi message handler version 39.2 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. tg3.c:v3.94 (August 14, 2008) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:9f:6f:17 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:0c:00.0: PCI INT A disabled console [netcon0] enabled netconsole: network logging started Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02) pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6fa0-0x6fa7 Probing IDE interface ide0... hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 314 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 314 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 314 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS722080K9A300, DCBOC54P, max UDMA/133 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72208 DCBO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10 yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe] yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 yenta_cardbus 0000:03:01.0: Socket status: 30000006 pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07 yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: supports USB remote wakeup ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: detected 2 ports uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.0: Performing full reset uhci_hcd 0000:00:1a.0: supports USB remote wakeup uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: detected 2 ports uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.1: Performing full reset uhci_hcd 0000:00:1a.1: supports USB remote wakeup uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '006' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: default language 0x0409 usb usb6: uevent usb usb6: usb_probe_device usb usb6: configuration #1 chosen from 1 choice usb usb6: adding 6-0:1.0 (config #1, interface 0) usb 6-0:1.0: uevent hub 6-0:1.0: usb_probe_interface hub 6-0:1.0: usb_probe_interface - got id hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected hub 6-0:1.0: standalone hub hub 6-0:1.0: no power switching (usb 1.0) hub 6-0:1.0: individual port over-current protection hub 6-0:1.0: power on to power good time: 2ms hub 6-0:1.0: local power source is good hub 6-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '007' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: default language 0x0409 usb usb7: uevent usb usb7: usb_probe_device usb usb7: configuration #1 chosen from 1 choice usb usb7: adding 7-0:1.0 (config #1, interface 0) usb 7-0:1.0: uevent hub 7-0:1.0: usb_probe_interface hub 7-0:1.0: usb_probe_interface - got id hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected hub 7-0:1.0: standalone hub hub 7-0:1.0: no power switching (usb 1.0) hub 7-0:1.0: individual port over-current protection hub 7-0:1.0: power on to power good time: 2ms hub 7-0:1.0: local power source is good hub 7-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usbcore: registered new interface driver wusb-cbaf usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Driver for HIFN 795x crypto accelerator chip has been successfully registered. dca service started, version 1.4 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 5: status 0501 change 0001 uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00 hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000 hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s firewire_core: created device fw0: GUID 464fc0000e451870, S400 usb usb4: suspend_rh (auto-stop) usb usb5: suspend_rh (auto-stop) usb usb6: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb usb7: suspend_rh (auto-stop) hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh hub 5-0:1.0: hub_suspend usb usb5: bus auto-suspend usb usb5: suspend_rh hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh Clocksource tsc unstable (delta = -38712966487 ns) hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub ehci_hcd 0000:00:1d.7: port 5 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: port 5 not reset yet, waiting 50ms usb usb7: wakeup_rh (auto-start) ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00 hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s ALSA device list: #0: HDA Intel at 0xf6ffc000 irq 21 NET: Registered protocol family 26 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered TCP westwood registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered NET: Registered protocol family 35 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller CCID: Registered CCID 2 (TCP-like) SCTP: Hash tables configured (established 65536 bind 65536) TIPC: Activated (version 1.6.4 compiled Oct 27 2008 12:45:44) NET: Registered protocol family 30 TIPC: Started in single node mode rtc_cmos 00:03: setting system clock to 2008-10-30 16:32:53 UTC (1225384373) hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: ep0 maxpacket = 8 usb 7-1: uevent usb 7-1: usb_probe_device usb 7-1: configuration #1 chosen from 1 choice usb 7-1: adding 7-1:1.0 (config #1, interface 0) usb 7-1:1.0: uevent hub 7-1:1.0: usb_probe_interface hub 7-1:1.0: usb_probe_interface - got id hub 7-1:1.0: USB hub found hub 7-1:1.0: 4 ports detected hub 7-1:1.0: compound device; port removable status: RFRR hub 7-1:1.0: individual port power switching hub 7-1:1.0: individual port over-current protection hub 7-1:1.0: power on to power good time: 100ms hub 7-1:1.0: local power source is lost (inactive) hub 7-1:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '002' usb 7-1: New USB device found, idVendor=0b97, idProduct=7761 usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020 hub 7-1:1.0: port 2: status 0101 change 0001 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us hub 7-1:1.0: state 7 ports 4 chg 0004 evt 0000 hub 7-1:1.0: port 2, status 0101, change 0000, 12 Mb/s input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 usb 7-1.2: new full speed USB device using uhci_hcd and address 3 usb 7-1.2: skipped 1 descriptor after endpoint usb 7-1.2: default language 0x0409 usb 7-1.2: uevent usb 7-1.2: usb_probe_device usb 7-1.2: configuration #1 chosen from 1 choice usb 7-1.2: adding 7-1.2:1.0 (config #1, interface 0) usb 7-1.2:1.0: uevent drivers/usb/core/inode.c: creating file '003' usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772 usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1.2: Product: O2Micro CCID SC Reader usb 7-1.2: Manufacturer: O2 hub 7-1:1.0: state 7 ports 4 chg 0000 evt 0004 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 516k freed Write protecting the kernel read-only data: 6824k usb usb3: uevent usb 3-0:1.0: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb1: uevent usb 1-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb usb6: uevent usb 6-0:1.0: uevent usb usb7: uevent usb 7-0:1.0: uevent usb 7-1: uevent usb 7-1.2: uevent usb 7-1.2:1.0: uevent usb 7-1:1.0: uevent usb usb2: uevent usb 2-0:1.0: uevent hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub loadkeys[1931]: segfault at 5a0 ip 00007f6c205a4af9 sp 00007fff28dd5be8 error 4 in libconsole.so.0.0.0[7f6c20592000+19000] Adding 3903752k swap on /dev/sda7. Priority:-1 extents:1 across:3903752k EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 drm: disagrees about version of symbol struct_module nouveau: disagrees about version of symbol struct_module iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) iwl3945 0000:0c:00.0: irq 313 for MSI/MSI-X iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready tg3 0000:09:00.0: irq 312 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready warning: `ntpd' uses 32-bit capabilities (legacy support in use) wlan0: authenticate with AP 00:14:1b:5a:13:40 wlan0: authenticated wlan0: associate with AP 00:14:1b:5a:13:40 wlan0: RX AssocResp from 00:14:1b:5a:13:40 (capab=0x431 status=0 aid=240) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary wlan0: no IPv6 routers present usb usb2: usb resume ehci_hcd 0000:00:1d.7: resume root hub hub 2-0:1.0: hub_resume ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 1: status 0501 change 0001 hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 1 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: port 1 not reset yet, waiting 50ms usb usb5: usb resume usb usb5: wakeup_rh hub 5-0:1.0: hub_resume uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 hub 5-0:1.0: port 1: status 0101 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: default language 0x0409 usb 5-1: uevent usb 5-1: usb_probe_device usb 5-1: configuration #1 chosen from 1 choice usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' usb 5-1: New USB device found, idVendor=067b, idProduct=2303 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB-Serial Controller usb 5-1: Manufacturer: Prolific Technology Inc. usbcore: registered new interface driver usbserial USB Serial support registered for generic usbserial_generic 7-1.2:1.0: usb_probe_interface usbserial_generic 7-1.2:1.0: usb_probe_interface - got id usbserial_generic 5-1:1.0: usb_probe_interface usbserial_generic 5-1:1.0: usb_probe_interface - got id usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for pl2303 pl2303 5-1:1.0: usb_probe_interface pl2303 5-1:1.0: usb_probe_interface - got id pl2303 5-1:1.0: pl2303 converter detected usb 5-1: pl2303 converter now attached to ttyUSB0 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us ------------[ cut here ]------------ WARNING: at drivers/usb/serial/usb-serial.c:326 serial_write_room+0x53/0x6a [usbserial]() Modules linked in: pl2303 usbserial pcmcia intel_agp Pid: 10, comm: events/1 Not tainted 2.6.28-rc2-hh1 #13 Call Trace: [] warn_on_slowpath+0x51/0x75 [] check_preempt_wakeup+0xc5/0xfa [] try_to_wake_up+0x1b4/0x1c6 [] pl2303_send+0x4c/0x209 [pl2303] [] __wake_up_common+0x46/0x76 [] serial_write_room+0x53/0x6a [usbserial] [] _spin_lock_irqsave+0x24/0x2c [] opost+0x12/0x1bf [] n_tty_receive_buf+0x2ca/0xd6b [] __switch_to+0xb4/0x3fe [] dequeue_task_fair+0x26/0x77 [] __dequeue_entity+0x25/0x68 [] default_spin_lock_flags+0x5/0x8 [] _spin_lock_irqsave+0x24/0x2c [] flush_to_ldisc+0x120/0x1cd [] flush_to_ldisc+0x0/0x1cd [] run_workqueue+0x96/0x130 [] _spin_lock_irqsave+0x24/0x2c [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 ---[ end trace 99a05ea818349004 ]--- ------------[ cut here ]------------ WARNING: at drivers/usb/serial/usb-serial.c:313 serial_write+0x79/0x9d [usbserial]() Modules linked in: pl2303 usbserial pcmcia intel_agp Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13 Call Trace: [] warn_on_slowpath+0x51/0x75 [] check_preempt_wakeup+0xc5/0xfa [] try_to_wake_up+0x1b4/0x1c6 [] pl2303_send+0x4c/0x209 [pl2303] [] __wake_up_common+0x46/0x76 [] serial_write+0x79/0x9d [usbserial] [] _spin_lock_irqsave+0x24/0x2c [] tty_put_char+0x2b/0x2d [] opost+0x1ab/0x1bf [] n_tty_receive_buf+0x2ca/0xd6b [] __switch_to+0xb4/0x3fe [] dequeue_task_fair+0x26/0x77 [] __dequeue_entity+0x25/0x68 [] default_spin_lock_flags+0x5/0x8 [] _spin_lock_irqsave+0x24/0x2c [] flush_to_ldisc+0x120/0x1cd [] flush_to_ldisc+0x0/0x1cd [] run_workqueue+0x96/0x130 [] _spin_lock_irqsave+0x24/0x2c [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 ---[ end trace 99a05ea818349004 ]--- ------------[ cut here ]------------ WARNING: at drivers/usb/serial/usb-serial.c:326 serial_write_room+0x53/0x6a [usbserial]() Modules linked in: pl2303 usbserial pcmcia intel_agp Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13 Call Trace: [] warn_on_slowpath+0x51/0x75 [] __wake_up+0x38/0x4f [] __queue_work+0x60/0x6f [] queue_work_on+0x42/0x4c [] pl2303_write+0xf5/0x102 [pl2303] [] serial_write+0x79/0x9d [usbserial] [] serial_write_room+0x53/0x6a [usbserial] [] _spin_lock_irqsave+0x24/0x2c [] opost+0x12/0x1bf [] n_tty_receive_buf+0x2ca/0xd6b [] __switch_to+0xb4/0x3fe [] dequeue_task_fair+0x26/0x77 [] __dequeue_entity+0x25/0x68 [] default_spin_lock_flags+0x5/0x8 [] _spin_lock_irqsave+0x24/0x2c [] flush_to_ldisc+0x120/0x1cd [] flush_to_ldisc+0x0/0x1cd [] run_workqueue+0x96/0x130 [] _spin_lock_irqsave+0x24/0x2c [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 ---[ end trace 99a05ea818349004 ]--- ------------[ cut here ]------------ WARNING: at drivers/usb/serial/usb-serial.c:313 serial_write+0x79/0x9d [usbserial]() Modules linked in: pl2303 usbserial pcmcia intel_agp Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13 Call Trace: [] warn_on_slowpath+0x51/0x75 [] __wake_up+0x38/0x4f [] __queue_work+0x60/0x6f [] queue_work_on+0x42/0x4c [] serial_write+0x79/0x9d [usbserial] [] _spin_lock_irqsave+0x24/0x2c [] tty_put_char+0x2b/0x2d [] opost+0x1ab/0x1bf [] n_tty_receive_buf+0x2ca/0xd6b [] __switch_to+0xb4/0x3fe [] dequeue_task_fair+0x26/0x77 [] __dequeue_entity+0x25/0x68 [] default_spin_lock_flags+0x5/0x8 [] _spin_lock_irqsave+0x24/0x2c [] flush_to_ldisc+0x120/0x1cd [] flush_to_ldisc+0x0/0x1cd [] run_workqueue+0x96/0x130 [] _spin_lock_irqsave+0x24/0x2c [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x5f [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 ---[ end trace 99a05ea818349004 ]--- uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us