[ 0.000000] Linux version 2.6.27.4r4 (root@energy) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #4 SMP Wed Oct 29 20:28:06 CET 2008 [ 0.000000] Command line: root=/dev/md1 md=1,1,/dev/sda3,/dev/sdb3 nopat nmi_watchdog=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ceeb0000 (usable) [ 0.000000] BIOS-e820: 00000000ceeb0000 - 00000000ceec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ceec0000 - 00000000ceef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000131000000 (usable) [ 0.000000] PAT support disabled. [ 0.000000] last_pfn = 0x131000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xceeb0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cee00000 page 2M [ 0.000000] 00cee00000 - 00ceeb0000 page 4k [ 0.000000] kernel direct mapping tables up to ceeb0000 @ 8000-e000 [ 0.000000] last_map_addr: ceeb0000 end: ceeb0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0131000000 page 2M [ 0.000000] kernel direct mapping tables up to 131000000 @ c000-12000 [ 0.000000] last_map_addr: 131000000 end: 131000000 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FA390, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CEEB0000, 003C (r1 090808 RSDT1057 20080908 MSFT 97) [ 0.000000] ACPI: FACP CEEB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CEEB0440, 74C0 (r1 AS140 AS140103 103 INTL 20051117) [ 0.000000] ACPI: FACS CEEC0000, 0040 [ 0.000000] ACPI: APIC CEEB0390, 006C (r1 090808 APIC1057 20080908 MSFT 97) [ 0.000000] ACPI: MCFG CEEB0400, 003C (r1 090808 OEMMCFG 20080908 MSFT 97) [ 0.000000] ACPI: OEMB CEEC0040, 0071 (r1 090808 OEMB1057 20080908 MSFT 97) [ 0.000000] ACPI: HPET CEEB7900, 0038 (r1 090808 OEMHPET 20080908 MSFT 97) [ 0.000000] ACPI: SSDT CEEB7940, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0131000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000708028] TEXT DATA BSS ==> [0000200000 - 0000708028] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #5 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00131000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000ceeb0 [ 0.000000] 0: 0x00100000 -> 0x00131000 [ 0.000000] On node 0 totalpages: 1048143 [ 0.000000] DMA zone: 2551 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 829160 pages, LIFO batch:31 [ 0.000000] Normal zone: 197960 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ceeb0000 - 00000000ceec0000 [ 0.000000] PM: Registered nosave memory: 00000000ceec0000 - 00000000ceef0000 [ 0.000000] PM: Registered nosave memory: 00000000ceef0000 - 00000000cef00000 [ 0.000000] PM: Registered nosave memory: 00000000cef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cef00000:31000000) [ 0.000000] PERCPU: Allocating 45792 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029671 [ 0.000000] Kernel command line: root=/dev/md1 md=1,1,/dev/sda3,/dev/sdb3 nopat nmi_watchdog=0 [ 0.000000] md: Will configure md1 (super-block) from 1,/dev/sda3,/dev/sdb3, below. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 3000.078 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Node 0: aperture @ 20000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.003333] Memory: 4042784k/4997120k available (3234k kernel code, 148912k reserved, 1104k data, 304k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.16 BogoMIPS (lpj=10000260) [ 0.003454] Mount-cache hash table entries: 256 [ 0.003603] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003656] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003709] tseg: 0000000000 [ 0.003714] CPU: Physical Processor ID: 0 [ 0.003765] CPU: Processor Core ID: 0 [ 0.003822] using C1E aware idle routine [ 0.003884] ACPI: Core revision 20080609 [ 0.011408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044469] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.044555] Using local APIC timer interrupts. [ 0.046667] APIC timer calibration result 12500333 [ 0.046668] Detected 12.500 MHz APIC timer. [ 0.046785] Booting processor 1/1 ip 6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6002.15 BogoMIPS (lpj=10000244) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.140128] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.140561] Brought up 2 CPUs [ 0.140613] Total of 2 processors activated (12005.31 BogoMIPS). [ 0.140854] net_namespace: 800 bytes [ 0.140940] Time: 1:39:50 Date: 10/30/08 [ 0.141004] NET: Registered protocol family 16 [ 0.141160] No dock devices found. [ 0.141265] node 0 link 0: io port [1000, ffffff] [ 0.141267] TOM: 00000000cf000000 aka 3312M [ 0.141321] node 0 link 0: mmio [e0000000, efffffff] [ 0.141323] node 0 link 0: mmio [f0000000, ffffffff] [ 0.141325] node 0 link 0: mmio [a0000, bffff] [ 0.141327] node 0 link 0: mmio [cf000000, dfffffff] [ 0.141329] TOM2: 0000000131000000 aka 4880M [ 0.141381] bus: [00,07] on node 0 link 0 [ 0.141382] bus: 00 index 0 io port: [0, ffff] [ 0.141384] bus: 00 index 1 mmio: [cf000000, ffffffff] [ 0.141385] bus: 00 index 2 mmio: [a0000, bffff] [ 0.141386] bus: 00 index 3 mmio: [131000000, fcffffffff] [ 0.141391] ACPI: bus type pci registered [ 0.141501] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.141555] PCI: Not using MMCONFIG. [ 0.141607] PCI: Using configuration type 1 for base access [ 0.142539] ACPI: EC: Look up EC in DSDT [ 0.149268] ACPI: Interpreter enabled [ 0.149321] ACPI: (supports S0 S1 S3 S4 S5) [ 0.149465] ACPI: Using IOAPIC for interrupt routing [ 0.149558] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.152768] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.156003] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.162194] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.162302] PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff] [ 0.162343] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.162398] pci 0000:00:02.0: PME# disabled [ 0.162480] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.162534] pci 0000:00:09.0: PME# disabled [ 0.162609] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.162663] pci 0000:00:0a.0: PME# disabled [ 0.162757] PCI: 0000:00:11.0 reg 10 io port: [a000, a007] [ 0.162764] PCI: 0000:00:11.0 reg 14 io port: [9000, 9003] [ 0.162770] PCI: 0000:00:11.0 reg 18 io port: [8000, 8007] [ 0.162777] PCI: 0000:00:11.0 reg 1c io port: [7000, 7003] [ 0.162784] PCI: 0000:00:11.0 reg 20 io port: [6000, 600f] [ 0.162790] PCI: 0000:00:11.0 reg 24 32bit mmio: [fddff800, fddffbff] [ 0.162829] PCI: 0000:00:12.0 reg 10 32bit mmio: [fddfe000, fddfefff] [ 0.162882] PCI: 0000:00:12.1 reg 10 32bit mmio: [fddfd000, fddfdfff] [ 0.162953] PCI: 0000:00:12.2 reg 10 32bit mmio: [fddff000, fddff0ff] [ 0.162999] pci 0000:00:12.2: supports D1 [ 0.163000] pci 0000:00:12.2: supports D2 [ 0.163002] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.163057] pci 0000:00:12.2: PME# disabled [ 0.163132] PCI: 0000:00:13.0 reg 10 32bit mmio: [fddfc000, fddfcfff] [ 0.163184] PCI: 0000:00:13.1 reg 10 32bit mmio: [fddf7000, fddf7fff] [ 0.163255] PCI: 0000:00:13.2 reg 10 32bit mmio: [fddf6800, fddf68ff] [ 0.163302] pci 0000:00:13.2: supports D1 [ 0.163303] pci 0000:00:13.2: supports D2 [ 0.163304] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.163336] pci 0000:00:13.2: PME# disabled [ 0.163487] PCI: 0000:00:14.1 reg 10 io port: [0, 7] [ 0.163494] PCI: 0000:00:14.1 reg 14 io port: [0, 3] [ 0.163500] PCI: 0000:00:14.1 reg 18 io port: [0, 7] [ 0.163507] PCI: 0000:00:14.1 reg 1c io port: [0, 3] [ 0.163513] PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f] [ 0.163632] PCI: 0000:00:14.5 reg 10 32bit mmio: [fddf5000, fddf5fff] [ 0.163750] PCI: 0000:02:00.0 reg 10 32bit mmio: [d0000000, dfffffff] [ 0.163762] PCI: 0000:02:00.0 reg 18 64bit mmio: [fdff0000, fdffffff] [ 0.163767] PCI: 0000:02:00.0 reg 20 io port: [c000, c0ff] [ 0.163775] PCI: 0000:02:00.0 reg 30 32bit mmio: [fdfc0000, fdfdffff] [ 0.163789] pci 0000:02:00.0: supports D1 [ 0.163790] pci 0000:02:00.0: supports D2 [ 0.163814] PCI: 0000:02:00.1 reg 10 64bit mmio: [fdfec000, fdfeffff] [ 0.163845] pci 0000:02:00.1: supports D1 [ 0.163846] pci 0000:02:00.1: supports D2 [ 0.163893] PCI: bridge 0000:00:02.0 io port: [c000, cfff] [ 0.163895] PCI: bridge 0000:00:02.0 32bit mmio: [fdf00000, fdffffff] [ 0.163899] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, dfffffff] [ 0.163944] PCI: bridge 0000:00:09.0 io port: [d000, dfff] [ 0.163947] PCI: bridge 0000:00:09.0 32bit mmio: [fe000000, feafffff] [ 0.163950] PCI: bridge 0000:00:09.0 64bit mmio pref: [fa000000, fcefffff] [ 0.163984] PCI: 0000:01:00.0 reg 10 io port: [b800, b8ff] [ 0.163995] PCI: 0000:01:00.0 reg 18 32bit mmio: [cffff000, cfffffff] [ 0.164006] PCI: 0000:01:00.0 reg 20 32bit mmio: [cffe0000, cffeffff] [ 0.164016] PCI: 0000:01:00.0 reg 30 32bit mmio: [fdef0000, fdefffff] [ 0.164038] pci 0000:01:00.0: supports D1 [ 0.164039] pci 0000:01:00.0: supports D2 [ 0.164040] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164095] pci 0000:01:00.0: PME# disabled [ 0.164188] PCI: bridge 0000:00:0a.0 io port: [b000, bfff] [ 0.164190] PCI: bridge 0000:00:0a.0 32bit mmio: [fde00000, fdefffff] [ 0.164194] PCI: bridge 0000:00:0a.0 64bit mmio pref: [cff00000, cfffffff] [ 0.164244] PCI: 0000:05:05.0 reg 10 io port: [e800, e8ff] [ 0.164251] PCI: 0000:05:05.0 reg 14 32bit mmio: [febff000, febfffff] [ 0.164285] PCI: 0000:05:05.0 reg 30 32bit mmio: [febe0000, febeffff] [ 0.164323] PCI: 0000:05:06.0 reg 10 32bit mmio: [fcfff000, fcffffff] [ 0.164405] PCI: 0000:05:08.0 reg 10 io port: [e400, e43f] [ 0.164461] pci 0000:05:08.0: supports D1 [ 0.164462] pci 0000:05:08.0: supports D2 [ 0.164499] pci 0000:00:14.4: transparent bridge [ 0.164554] PCI: bridge 0000:00:14.4 io port: [e000, efff] [ 0.164558] PCI: bridge 0000:00:14.4 32bit mmio: [feb00000, febfffff] [ 0.164562] PCI: bridge 0000:00:14.4 32bit mmio pref: [fcf00000, fcffffff] [ 0.164576] bus 00 -> node 0 [ 0.164581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.164854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.164936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.165019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.165138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.167486] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.167774] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.168060] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.168345] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.168630] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15) [ 0.168915] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.169201] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.169470] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.169777] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.169848] pnp: PnP ACPI init [ 0.169905] ACPI: bus type pnp registered [ 0.171137] pnp 00:08: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.171226] pnp 00:08: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.171510] pnp 00:09: mem resource (0xffb80000-0xffbfffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.171599] pnp 00:09: mem resource (0xfec10000-0xfec1001f) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.172229] pnp 00:0c: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.173617] pnp 00:0d: mem resource (0xfec00000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling [ 0.173979] pnp: PnP ACPI: found 14 devices [ 0.174032] ACPI: ACPI bus type pnp unregistered [ 0.174188] SCSI subsystem initialized [ 0.174290] libata version 3.00 loaded. [ 0.174359] usbcore: registered new interface driver usbfs [ 0.174438] usbcore: registered new interface driver hub [ 0.174520] usbcore: registered new device driver usb [ 0.174685] PCI: Using ACPI for IRQ routing [ 0.174743] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.186670] DMAR:parse DMAR table failure. [ 0.186902] PCI-DMA: Disabling AGP. [ 0.187068] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.187120] PCI-DMA: using GART IOMMU. [ 0.187174] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.187703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.187842] hpet0: 4 32-bit timers, 14318180 Hz [ 0.188938] ACPI: RTC can wake from S4 [ 0.190012] Switched to high resolution mode on CPU 0 [ 0.190098] Switched to high resolution mode on CPU 1 [ 0.200038] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.200092] system 00:09: ioport range 0x40b-0x40b has been reserved [ 0.200145] system 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 0.200199] system 00:09: ioport range 0xc00-0xc01 has been reserved [ 0.200252] system 00:09: ioport range 0xc14-0xc14 has been reserved [ 0.200305] system 00:09: ioport range 0xc50-0xc51 has been reserved [ 0.200358] system 00:09: ioport range 0xc52-0xc52 has been reserved [ 0.200411] system 00:09: ioport range 0xc6c-0xc6c has been reserved [ 0.200465] system 00:09: ioport range 0xc6f-0xc6f has been reserved [ 0.200518] system 00:09: ioport range 0xcd0-0xcd1 has been reserved [ 0.200571] system 00:09: ioport range 0xcd2-0xcd3 has been reserved [ 0.200624] system 00:09: ioport range 0xcd4-0xcd5 has been reserved [ 0.200677] system 00:09: ioport range 0xcd6-0xcd7 has been reserved [ 0.200731] system 00:09: ioport range 0xcd8-0xcdf has been reserved [ 0.200784] system 00:09: ioport range 0x800-0x89f has been reserved [ 0.200841] system 00:09: ioport range 0xb00-0xb0f has been reserved [ 0.200896] system 00:09: ioport range 0xb20-0xb3f has been reserved [ 0.200950] system 00:09: ioport range 0x900-0x90f has been reserved [ 0.201003] system 00:09: ioport range 0x910-0x91f has been reserved [ 0.201057] system 00:09: ioport range 0xfe00-0xfefe has been reserved [ 0.201113] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.201171] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.201224] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.201278] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.201331] system 00:0d: iomem range 0x100000-0xceefffff could not be reserved [ 0.206364] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.206418] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.206472] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.206526] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.206615] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.206680] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.206734] pci 0000:00:09.0: MEM window: 0xfe000000-0xfeafffff [ 0.206787] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.206877] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.206930] pci 0000:00:0a.0: IO window: 0xb000-0xbfff [ 0.206984] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.207037] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.207129] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.207183] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.207239] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff [ 0.207294] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff [ 0.207394] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.207449] pci 0000:00:02.0: setting latency timer to 64 [ 0.207454] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.207512] pci 0000:00:09.0: setting latency timer to 64 [ 0.207516] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.207570] pci 0000:00:0a.0: setting latency timer to 64 [ 0.207576] bus: 00 index 0 io port: [0, ffff] [ 0.207628] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.207681] bus: 02 index 0 io port: [c000, cfff] [ 0.207733] bus: 02 index 1 mmio: [fdf00000, fdffffff] [ 0.207786] bus: 02 index 2 mmio: [d0000000, dfffffff] [ 0.207838] bus: 02 index 3 mmio: [0, 0] [ 0.207890] bus: 03 index 0 io port: [d000, dfff] [ 0.207943] bus: 03 index 1 mmio: [fe000000, feafffff] [ 0.207995] bus: 03 index 2 mmio: [fa000000, fcefffff] [ 0.208048] bus: 03 index 3 mmio: [0, 0] [ 0.208100] bus: 01 index 0 io port: [b000, bfff] [ 0.208152] bus: 01 index 1 mmio: [fde00000, fdefffff] [ 0.208204] bus: 01 index 2 mmio: [cff00000, cfffffff] [ 0.208257] bus: 01 index 3 mmio: [0, 0] [ 0.208309] bus: 05 index 0 io port: [e000, efff] [ 0.208361] bus: 05 index 1 mmio: [feb00000, febfffff] [ 0.208414] bus: 05 index 2 mmio: [fcf00000, fcffffff] [ 0.208466] bus: 05 index 3 io port: [0, ffff] [ 0.208518] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 0.208576] NET: Registered protocol family 2 [ 0.240023] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.240456] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.241946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.242447] TCP: Hash tables configured (established 262144 bind 65536) [ 0.242501] TCP reno registered [ 0.250048] NET: Registered protocol family 1 [ 0.251321] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.251464] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.251582] msgmni has been set to 7897 [ 0.251696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.251784] io scheduler noop registered [ 0.251838] io scheduler cfq registered (default) [ 0.251959] pci 0000:02:00.0: Boot video device [ 0.252031] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.252053] pcieport-driver 0000:00:02.0: found MSI capability [ 0.252128] pci_express 0000:00:02.0:pcie00: allocate port service [ 0.252188] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.252209] pcieport-driver 0000:00:09.0: found MSI capability [ 0.252281] pci_express 0000:00:09.0:pcie00: allocate port service [ 0.252337] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.252357] pcieport-driver 0000:00:0a.0: found MSI capability [ 0.252429] pci_express 0000:00:0a.0:pcie00: allocate port service [ 0.252650] input: Power Button (FF) as /class/input/input0 [ 0.252703] ACPI: Power Button (FF) [PWRF] [ 0.252810] input: Power Button (CM) as /class/input/input1 [ 0.252863] ACPI: Power Button (CM) [PWRB] [ 0.253096] processor ACPI0007:00: registered as cooling_device0 [ 0.253151] ACPI: Processor [P001] (supports 8 throttling states) [ 0.253277] processor ACPI0007:01: registered as cooling_device1 [ 0.286784] hpet_resources: 0xfed00000 is busy [ 0.286818] Linux agpgart interface v0.103 [ 0.286988] Driver 'sd' needs updating - please use bus_type methods [ 0.287102] ahci 0000:00:11.0: version 3.0 [ 0.287114] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.287285] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.287373] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.287800] scsi0 : ahci [ 0.287925] scsi1 : ahci [ 0.288035] scsi2 : ahci [ 0.288141] scsi3 : ahci [ 0.288249] scsi4 : ahci [ 0.288355] scsi5 : ahci [ 0.288496] ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22 [ 0.288585] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22 [ 0.288674] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22 [ 0.288763] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22 [ 0.288852] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22 [ 0.288941] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22 [ 0.767509] ata1: softreset failed (device not ready) [ 0.767566] ata1: failed due to HW bug, retry pmp=0 [ 0.927519] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.933878] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 0.933931] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 0.940344] ata1.00: configured for UDMA/133 [ 1.434175] ata2: softreset failed (device not ready) [ 1.434229] ata2: failed due to HW bug, retry pmp=0 [ 1.594184] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.600533] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.600586] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.606996] ata2.00: configured for UDMA/133 [ 1.940857] ata3: SATA link down (SStatus 0 SControl 300) [ 2.274189] ata4: SATA link down (SStatus 0 SControl 300) [ 2.607523] ata5: SATA link down (SStatus 0 SControl 300) [ 2.940856] ata6: SATA link down (SStatus 0 SControl 300) [ 2.954240] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 2.954429] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 2.954491] sd 0:0:0:0: [sda] Write Protect is off [ 2.954544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.954560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.954682] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 2.954743] sd 0:0:0:0: [sda] Write Protect is off [ 2.954795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.954810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.954899] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.979876] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.979998] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.980135] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 2.980310] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 2.980372] sd 1:0:0:0: [sdb] Write Protect is off [ 2.980425] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.980441] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.980564] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 2.980624] sd 1:0:0:0: [sdb] Write Protect is off [ 2.980677] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.980693] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.980781] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 3.007273] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.007383] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.008486] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PSMS] at 0x60,0x64 irq 1,12 [ 3.010953] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.011009] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.011108] mice: PS/2 mouse device common for all mice [ 3.040945] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.041021] rtc0: alarms up to one month, y3k, hpet irqs [ 3.041097] md: raid1 personality registered for level 1 [ 3.041207] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.041333] cpuidle: using governor ladder [ 3.041438] usbcore: registered new interface driver hiddev [ 3.041515] usbcore: registered new interface driver usbhid [ 3.041568] usbhid: v2.6:USB HID core driver [ 3.041680] TCP cubic registered [ 3.041732] Initializing XFRM netlink socket [ 3.041796] NET: Registered protocol family 10 [ 3.041933] IPv6 over IPv4 tunneling driver [ 3.042064] NET: Registered protocol family 17 [ 3.042134] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.042254] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.042308] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.042361] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.042413] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.042466] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.042518] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.042571] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.042623] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.042839] registered taskstats version 1 [ 3.042995] Magic number: 12:514:661 [ 3.067237] input: AT Translated Set 2 keyboard as /class/input/input2 [ 3.143434] md: Autodetecting RAID arrays. [ 3.221791] md: Scanned 8 and added 8 devices. [ 3.221844] md: autorun ... [ 3.221896] md: considering sdb6 ... [ 3.221951] md: adding sdb6 ... [ 3.222004] md: sdb5 has different UUID to sdb6 [ 3.222057] md: sdb3 has different UUID to sdb6 [ 3.222111] md: sdb1 has different UUID to sdb6 [ 3.222165] md: adding sda6 ... [ 3.222218] md: sda5 has different UUID to sdb6 [ 3.222271] md: sda3 has different UUID to sdb6 [ 3.222325] md: sda1 has different UUID to sdb6 [ 3.222453] md: created md3 [ 3.222506] md: bind [ 3.222563] md: bind [ 3.222620] md: running: [ 3.222804] raid1: raid set md3 active with 2 out of 2 mirrors [ 3.222894] md: considering sdb5 ... [ 3.222948] md: adding sdb5 ... [ 3.223001] md: sdb3 has different UUID to sdb5 [ 3.223055] md: sdb1 has different UUID to sdb5 [ 3.223109] md: adding sda5 ... [ 3.223162] md: sda3 has different UUID to sdb5 [ 3.223215] md: sda1 has different UUID to sdb5 [ 3.223338] md: created md2 [ 3.223390] md: bind [ 3.223446] md: bind [ 3.223502] md: running: [ 3.223672] raid1: raid set md2 active with 2 out of 2 mirrors [ 3.223760] md: considering sdb3 ... [ 3.223814] md: adding sdb3 ... [ 3.223867] md: sdb1 has different UUID to sdb3 [ 3.223921] md: adding sda3 ... [ 3.223974] md: sda1 has different UUID to sdb3 [ 3.224096] md: created md1 [ 3.224148] md: bind [ 3.224217] md: bind [ 3.224274] md: running: [ 3.224443] raid1: raid set md1 active with 2 out of 2 mirrors [ 3.224530] md: considering sdb1 ... [ 3.224584] md: adding sdb1 ... [ 3.224637] md: adding sda1 ... [ 3.224689] md: created md0 [ 3.224741] md: bind [ 3.224798] md: bind [ 3.224854] md: running: [ 3.225018] raid1: raid set md0 active with 2 out of 2 mirrors [ 3.225104] md: ... autorun DONE. [ 3.225177] md: Loading md1: 1 [ 3.225237] md: couldn't update array info. -22 [ 3.225325] md: could not open unknown-block(0,1). [ 3.225378] md: md_import_device returned -6 [ 3.225434] md: could not bd_claim sda3. [ 3.225486] md: md_import_device returned -16 [ 3.225540] md: could not bd_claim sdb3. [ 3.225592] md: md_import_device returned -16 [ 3.225646] md: starting md1 failed [ 3.274690] reiser4: md1: found disk format 4.0.0. [ 5.307450] VFS: Mounted root (reiser4 filesystem) readonly. [ 5.307526] Freeing unused kernel memory: 304k freed [ 7.880474] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.880490] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.880503] r8169 0000:01:00.0: setting latency timer to 64 [ 7.880648] eth0: RTL8168c/8111c at 0xffffc2000005c000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 316 [ 7.906863] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.906875] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 7.906931] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 7.906969] ehci_hcd 0000:00:12.2: debug port 1 [ 7.906986] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 7.917509] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.917582] usb usb1: configuration #1 chosen from 1 choice [ 7.917603] hub 1-0:1.0: USB hub found [ 7.917609] hub 1-0:1.0: 6 ports detected [ 8.124261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.124263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.124265] usb usb1: Product: EHCI Host Controller [ 8.124266] usb usb1: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 8.124267] usb usb1: SerialNumber: 0000:00:12.2 [ 8.124290] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.124300] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 8.124335] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 8.124369] ehci_hcd 0000:00:13.2: debug port 1 [ 8.124387] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 8.134180] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.134245] usb usb2: configuration #1 chosen from 1 choice [ 8.134268] hub 2-0:1.0: USB hub found [ 8.134274] hub 2-0:1.0: 6 ports detected [ 8.237599] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.237602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.237604] usb usb2: Product: EHCI Host Controller [ 8.237605] usb usb2: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 8.237606] usb usb2: SerialNumber: 0000:00:13.2 [ 8.240862] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 8.272087] Linux video capture interface: v2.00 [ 8.284977] bttv: driver version 0.9.17 loaded [ 8.284980] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 8.285015] bttv: Bt8xx card found (0). [ 8.285028] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 8.285038] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 32, mmio: 0xfcfff000 [ 8.285434] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 8.285475] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 8.365879] usb 1-2: configuration #1 chosen from 1 choice [ 8.366107] hub 1-2:1.0: USB hub found [ 8.366339] hub 1-2:1.0: 4 ports detected [ 8.574264] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 8.574267] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.574269] usb 1-2: Product: USB2.0 Hub [ 8.641575] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 8.730973] usb 1-2.2: configuration #1 chosen from 1 choice [ 8.741415] input: Logitech USB Receiver as /class/input/input3 [ 8.774208] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 8.780037] input: Logitech USB Receiver as /class/input/input4 [ 8.807569] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 8.807631] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 8.807633] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.807634] usb 1-2.2: Product: USB Receiver [ 8.807635] usb 1-2.2: Manufacturer: Logitech [ 9.286685] bttv0: tea5757: read timeout [ 9.286688] bttv0: tuner type=5 [ 9.286691] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 9.287421] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 9.288159] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 9.316516] All bytes are equal. It is not a TEA5767 [ 9.316551] tuner' 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 9.319915] tuner-simple 0-0060: creating new instance [ 9.319918] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 9.331908] bttv0: registered device video0 [ 9.331924] bttv0: registered device vbi0 [ 9.723122] reiser4: md2: found disk format 4.0.0. [ 10.909343] reiser4: md3: found disk format 4.0.0. [ 35.753338] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 35.812962] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 36.666864] r8169: eth0: link up [ 36.666870] r8169: eth0: link up [ 38.189266] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 38.189276] ALSA sound/pci/emu10k1/emu10k1_main.c:1749: vendor=0x1102, device=0x8, subsystem_vendor_id=0x10011102, subsystem_id=0x1001 [ 38.189280] ALSA sound/pci/emu10k1/emu10k1_main.c:1774: Sound card name=Audigy 2 Value [SB0400] [ 38.195525] ALSA sound/pci/emu10k1/emu10k1_main.c:219: Audigy2 value: Special config. [ 38.766413] w83627ehf: Found W83627EHG chip at 0x290 [ 39.500007] Clocksource tsc unstable (delta = -141128012 ns) [ 218.390824] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 218.524662] usb 1-1: configuration #1 chosen from 1 choice [ 218.525245] usb 1-1: New USB device found, idVendor=05e3, idProduct=0701 [ 218.525250] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 218.525252] usb 1-1: Product: USB Mass Storage Device [ 218.525253] usb 1-1: Manufacturer: Genesyslogic [ 218.564013] Initializing USB Mass Storage driver... [ 218.564639] scsi6 : SCSI emulation for USB Mass Storage devices [ 218.564720] usb-storage: device found at 4 [ 218.564725] usb-storage: waiting for device to settle before scanning [ 218.564732] usbcore: registered new interface driver usb-storage [ 218.564735] USB Mass Storage support registered. [ 223.563564] usb-storage: device scan complete [ 223.660792] scsi 6:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0 [ 223.661073] scsi 6:0:0:0: Attached scsi generic sg2 type 5 [ 223.675766] Driver 'sr' needs updating - please use bus_type methods [ 223.770898] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 223.770903] Uniform CD-ROM driver Revision: 3.20 [ 223.770972] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 291.280350] ISO 9660 Extensions: RRIP_1991A [ 332.634154] usb 1-1: reset high speed USB device using ehci_hcd and address 4 [ 347.770812] usb 1-1: device descriptor read/64, error -110 [ 363.010812] usb 1-1: device descriptor read/64, error -110 [ 363.220812] usb 1-1: reset high speed USB device using ehci_hcd and address 4 [ 378.357476] usb 1-1: device descriptor read/64, error -110 [ 393.544727] usb 1-1: USB disconnect, address 4 [ 393.545020] sr 6:0:0:0: Device offlined - not ready after error recovery [ 393.545033] sr 6:0:0:0: [sr0] Result: hostbyte=0x05 driverbyte=0x00 [ 393.545037] end_request: I/O error, dev sr0, sector 1662128 [ 393.545041] Buffer I/O error on device sr0, logical block 415532 [ 393.545045] Buffer I/O error on device sr0, logical block 415533 [ 393.545051] Buffer I/O error on device sr0, logical block 415534 [ 393.545054] Buffer I/O error on device sr0, logical block 415535 [ 393.545057] Buffer I/O error on device sr0, logical block 415536 [ 393.545060] Buffer I/O error on device sr0, logical block 415537 [ 393.545063] Buffer I/O error on device sr0, logical block 415538 [ 393.545066] Buffer I/O error on device sr0, logical block 415539 [ 393.545069] Buffer I/O error on device sr0, logical block 415540 [ 393.545072] Buffer I/O error on device sr0, logical block 415541 [ 393.545085] sr 6:0:0:0: rejecting I/O to offline device [ 393.545102] sr 6:0:0:0: rejecting I/O to offline device [ 393.545104] sr 6:0:0:0: rejecting I/O to offline device [ 393.545117] sr 6:0:0:0: rejecting I/O to offline device [ 393.545128] sr 6:0:0:0: rejecting I/O to offline device [ 393.545137] sr 6:0:0:0: rejecting I/O to offline device [ 393.545148] sr 6:0:0:0: rejecting I/O to offline device [ 393.545160] sr 6:0:0:0: rejecting I/O to offline device [ 393.545175] sr 6:0:0:0: rejecting I/O to offline device [ 393.545187] sr 6:0:0:0: rejecting I/O to offline device [ 393.545199] sr 6:0:0:0: rejecting I/O to offline device [ 393.545210] sr 6:0:0:0: rejecting I/O to offline device [ 393.545221] sr 6:0:0:0: rejecting I/O to offline device [ 393.545232] sr 6:0:0:0: rejecting I/O to offline device [ 393.545244] sr 6:0:0:0: rejecting I/O to offline device [ 393.545256] sr 6:0:0:0: rejecting I/O to offline device [ 393.545270] sr 6:0:0:0: [sr0] Result: hostbyte=0x01 driverbyte=0x00 [ 393.545272] end_request: I/O error, dev sr0, sector 1662192 [ 393.545313] VFS: busy inodes on changed media. [ 393.545481] sr 6:0:0:0: rejecting I/O to offline device [ 393.545486] sr 6:0:0:0: rejecting I/O to offline device [ 393.545603] sr 6:0:0:0: rejecting I/O to offline device [ 393.545611] sr 6:0:0:0: rejecting I/O to offline device [ 393.572083] scsi 6:0:0:0: rejecting I/O to dead device [ 393.572300] scsi 6:0:0:0: rejecting I/O to dead device [ 393.572369] scsi 6:0:0:0: rejecting I/O to dead device [ 400.120806] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 415.257471] usb 1-1: device descriptor read/64, error -110 [ 430.497470] usb 1-1: device descriptor read/64, error -110 [ 430.707468] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 439.049097] ehci_hcd 0000:00:13.2: remove, state 4 [ 439.049107] usb usb2: USB disconnect, address 1 [ 439.050329] ehci_hcd 0000:00:13.2: USB bus 2 deregistered [ 439.050399] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 439.050409] ehci_hcd 0000:00:12.2: remove, state 1 [ 439.050414] usb usb1: USB disconnect, address 1 [ 440.727481] hub 1-0:1.0: cannot reset port 1 (err = -19) [ 440.727487] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 440.727496] hub 1-0:1.0: cannot reset port 1 (err = -19) [ 440.727498] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 440.727500] hub 1-0:1.0: cannot reset port 1 (err = -19) [ 440.727502] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 440.727505] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 440.727506] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 440.747470] usb 1-2: USB disconnect, address 2 [ 440.747474] usb 1-2.2: USB disconnect, address 3 [ 440.826627] ehci_hcd 0000:00:12.2: force halt; handhake ffffc2000004a024 0000c000 00000000 -> -110 [ 440.838259] ehci_hcd 0000:00:12.2: USB bus 1 deregistered [ 440.838451] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 443.288544] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 443.288562] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 443.289133] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 443.289173] ehci_hcd 0000:00:12.2: debug port 1 [ 443.289185] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 443.300241] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 443.300352] usb usb1: configuration #1 chosen from 1 choice [ 443.300377] hub 1-0:1.0: USB hub found [ 443.300385] hub 1-0:1.0: 6 ports detected [ 443.507560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 443.507564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 443.507566] usb usb1: Product: EHCI Host Controller [ 443.507569] usb usb1: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 443.507571] usb usb1: SerialNumber: 0000:00:12.2 [ 443.507594] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 443.507606] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 443.507644] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 443.507679] ehci_hcd 0000:00:13.2: debug port 1 [ 443.507691] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 443.517470] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 443.517556] usb usb2: configuration #1 chosen from 1 choice [ 443.517579] hub 2-0:1.0: USB hub found [ 443.517586] hub 2-0:1.0: 6 ports detected [ 443.620902] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 443.620906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 443.620908] usb usb2: Product: EHCI Host Controller [ 443.620910] usb usb2: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 443.620913] usb usb2: SerialNumber: 0000:00:13.2 [ 443.624147] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 443.757595] usb 1-1: configuration #1 chosen from 1 choice [ 443.760852] scsi7 : SCSI emulation for USB Mass Storage devices [ 443.761012] usb 1-1: New USB device found, idVendor=05e3, idProduct=0701 [ 443.761016] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 443.761018] usb 1-1: Product: USB Mass Storage Device [ 443.761019] usb 1-1: Manufacturer: Genesyslogic [ 443.761111] usb-storage: device found at 2 [ 443.761113] usb-storage: waiting for device to settle before scanning [ 443.867470] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 443.992571] usb 1-2: configuration #1 chosen from 1 choice [ 443.992786] hub 1-2:1.0: USB hub found [ 443.993136] hub 1-2:1.0: 4 ports detected [ 444.200888] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 444.200892] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 444.200894] usb 1-2: Product: USB2.0 Hub [ 444.267751] usb 1-2.2: new low speed USB device using ehci_hcd and address 4 [ 444.358581] usb 1-2.2: configuration #1 chosen from 1 choice [ 444.368837] input: Logitech USB Receiver as /class/input/input5 [ 444.402089] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 444.424061] input: Logitech USB Receiver as /class/input/input6 [ 444.457545] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 444.457615] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 444.457617] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 444.457619] usb 1-2.2: Product: USB Receiver [ 444.457620] usb 1-2.2: Manufacturer: Logitech [ 448.761103] usb-storage: device scan complete [ 448.762343] scsi 7:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0 [ 448.768983] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 448.770775] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 448.770921] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 557.656626] usb 1-1: reset high speed USB device using ehci_hcd and address 2 [ 572.793288] usb 1-1: device descriptor read/64, error -110 [ 587.357595] ehci_hcd 0000:00:13.2: remove, state 4 [ 587.357605] usb usb2: USB disconnect, address 1 [ 587.357833] ehci_hcd 0000:00:13.2: USB bus 2 deregistered [ 587.357897] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 587.357908] ehci_hcd 0000:00:12.2: remove, state 1 [ 587.357913] usb usb1: USB disconnect, address 1 [ 587.357914] usb 1-1: USB disconnect, address 0 [ 587.926629] hub 1-0:1.0: cannot reset port 1 (err = -19) [ 587.926634] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 587.926636] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 587.926828] sr 7:0:0:0: Device offlined - not ready after error recovery [ 587.926975] scsi 7:0:0:0: rejecting I/O to dead device [ 587.926981] scsi 7:0:0:0: rejecting I/O to dead device [ 587.926985] scsi 7:0:0:0: rejecting I/O to dead device [ 587.926989] scsi 7:0:0:0: rejecting I/O to dead device [ 587.927458] usb 1-2: USB disconnect, address 3 [ 587.927464] usb 1-2.2: USB disconnect, address 4 [ 588.024111] ehci_hcd 0000:00:12.2: force halt; handhake ffffc2000004a024 0000c000 00000000 -> -110 [ 588.036066] ehci_hcd 0000:00:12.2: USB bus 1 deregistered [ 588.036155] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 590.188780] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 590.188794] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 590.188862] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 590.188900] ehci_hcd 0000:00:12.2: debug port 1 [ 590.188912] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 590.197454] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 590.197563] usb usb1: configuration #1 chosen from 1 choice [ 590.197587] hub 1-0:1.0: USB hub found [ 590.197595] hub 1-0:1.0: 6 ports detected [ 590.404219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 590.404224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 590.404226] usb usb1: Product: EHCI Host Controller [ 590.404228] usb usb1: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 590.404230] usb usb1: SerialNumber: 0000:00:12.2 [ 590.404254] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 590.404266] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 590.404305] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 590.404341] ehci_hcd 0000:00:13.2: debug port 1 [ 590.404353] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 590.414122] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 590.414205] usb usb2: configuration #1 chosen from 1 choice [ 590.414229] hub 2-0:1.0: USB hub found [ 590.414236] hub 2-0:1.0: 6 ports detected [ 590.517549] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 590.517553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 590.517555] usb usb2: Product: EHCI Host Controller [ 590.517557] usb usb2: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 590.517560] usb usb2: SerialNumber: 0000:00:13.2 [ 590.520798] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 590.645820] usb 1-2: configuration #1 chosen from 1 choice [ 590.646034] hub 1-2:1.0: USB hub found [ 590.646385] hub 1-2:1.0: 4 ports detected [ 590.854211] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 590.854215] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 590.854217] usb 1-2: Product: USB2.0 Hub [ 590.921122] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 591.011038] usb 1-2.2: configuration #1 chosen from 1 choice [ 591.023018] input: Logitech USB Receiver as /class/input/input7 [ 591.065109] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 591.080005] input: Logitech USB Receiver as /class/input/input8 [ 591.118378] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 591.118449] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 591.118451] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 591.118452] usb 1-2.2: Product: USB Receiver [ 591.118453] usb 1-2.2: Manufacturer: Logitech [ 1494.097363] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1494.230935] usb 1-1: configuration #1 chosen from 1 choice [ 1494.231387] scsi8 : SCSI emulation for USB Mass Storage devices [ 1494.231653] usb 1-1: New USB device found, idVendor=05e3, idProduct=0701 [ 1494.231658] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1494.231660] usb 1-1: Product: USB Mass Storage Device [ 1494.231661] usb 1-1: Manufacturer: Genesyslogic [ 1494.231665] usb-storage: device found at 4 [ 1494.231667] usb-storage: waiting for device to settle before scanning [ 1499.230962] usb-storage: device scan complete [ 1499.258449] scsi 8:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0 [ 1499.350559] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1499.351554] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 1499.351688] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 1531.767361] usb 1-1: reset high speed USB device using ehci_hcd and address 4 [ 1546.904030] usb 1-1: device descriptor read/64, error -110 [ 1562.144026] usb 1-1: device descriptor read/64, error -110 [ 1562.354025] usb 1-1: reset high speed USB device using ehci_hcd and address 4 [ 1571.031747] ehci_hcd 0000:00:13.2: remove, state 4 [ 1571.031757] usb usb2: USB disconnect, address 1 [ 1571.031991] ehci_hcd 0000:00:13.2: USB bus 2 deregistered [ 1571.032056] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 1571.032064] ehci_hcd 0000:00:12.2: remove, state 1 [ 1571.032070] usb usb1: USB disconnect, address 1 [ 1571.032071] usb 1-1: USB disconnect, address 0 [ 1572.374030] hub 1-0:1.0: cannot reset port 1 (err = -19) [ 1572.374036] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 1572.374039] hub 1-0:1.0: cannot disable port 1 (err = -19) [ 1572.374435] scsi 8:0:0:0: Device offlined - not ready after error recovery [ 1572.374575] usb 1-2: USB disconnect, address 2 [ 1572.374581] usb 1-2.2: USB disconnect, address 3 [ 1572.377436] scsi 8:0:0:0: rejecting I/O to dead device [ 1572.377451] scsi 8:0:0:0: rejecting I/O to dead device [ 1572.377456] scsi 8:0:0:0: rejecting I/O to dead device [ 1572.477346] ehci_hcd 0000:00:12.2: force halt; handhake ffffc2000004a024 0000c000 00000000 -> -110 [ 1572.489340] ehci_hcd 0000:00:12.2: USB bus 1 deregistered [ 1572.489430] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 1574.758187] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1574.758204] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1574.758801] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1574.758841] ehci_hcd 0000:00:12.2: debug port 1 [ 1574.758854] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 1574.770181] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1574.770293] usb usb1: configuration #1 chosen from 1 choice [ 1574.770318] hub 1-0:1.0: USB hub found [ 1574.770326] hub 1-0:1.0: 6 ports detected [ 1574.977449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1574.977454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1574.977456] usb usb1: Product: EHCI Host Controller [ 1574.977458] usb usb1: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 1574.977460] usb usb1: SerialNumber: 0000:00:12.2 [ 1574.977483] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1574.977496] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1574.977536] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1574.977571] ehci_hcd 0000:00:13.2: debug port 1 [ 1574.977583] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 1574.987358] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1574.987442] usb usb2: configuration #1 chosen from 1 choice [ 1574.987470] hub 2-0:1.0: USB hub found [ 1574.987477] hub 2-0:1.0: 6 ports detected [ 1575.090791] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1575.090796] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1575.090798] usb usb2: Product: EHCI Host Controller [ 1575.090800] usb usb2: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 1575.090803] usb usb2: SerialNumber: 0000:00:13.2 [ 1575.094032] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1575.227511] usb 1-1: configuration #1 chosen from 1 choice [ 1575.227959] scsi9 : SCSI emulation for USB Mass Storage devices [ 1575.228120] usb 1-1: New USB device found, idVendor=05e3, idProduct=0701 [ 1575.228124] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1575.228126] usb 1-1: Product: USB Mass Storage Device [ 1575.228127] usb 1-1: Manufacturer: Genesyslogic [ 1575.228219] usb-storage: device found at 2 [ 1575.228220] usb-storage: waiting for device to settle before scanning [ 1575.334022] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1575.459111] usb 1-2: configuration #1 chosen from 1 choice [ 1575.459328] hub 1-2:1.0: USB hub found [ 1575.459679] hub 1-2:1.0: 4 ports detected [ 1575.667443] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1575.667447] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1575.667448] usb 1-2: Product: USB2.0 Hub [ 1575.734416] usb 1-2.2: new low speed USB device using ehci_hcd and address 4 [ 1575.824203] usb 1-2.2: configuration #1 chosen from 1 choice [ 1575.835976] input: Logitech USB Receiver as /class/input/input9 [ 1575.864086] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 1575.870254] input: Logitech USB Receiver as /class/input/input10 [ 1575.917434] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 1575.917505] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 1575.917507] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1575.917508] usb 1-2.2: Product: USB Receiver [ 1575.917509] usb 1-2.2: Manufacturer: Logitech [ 1580.227646] usb-storage: device scan complete [ 1580.983567] scsi 9:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0 [ 1580.993028] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1580.993271] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 1580.993360] sr 9:0:0:0: Attached scsi generic sg2 type 5 [ 1680.120201] usb 1-1: USB disconnect, address 2 [ 1680.131960] scsi 9:0:0:0: rejecting I/O to dead device [ 1680.131971] scsi 9:0:0:0: rejecting I/O to dead device [ 1680.131979] scsi 9:0:0:0: rejecting I/O to dead device [ 1680.131984] scsi 9:0:0:0: rejecting I/O to dead device [ 1685.304799] ehci_hcd 0000:00:13.2: remove, state 4 [ 1685.304906] usb usb2: USB disconnect, address 1 [ 1685.305180] ehci_hcd 0000:00:13.2: USB bus 2 deregistered [ 1685.305294] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 1685.305304] ehci_hcd 0000:00:12.2: remove, state 1 [ 1685.305310] usb usb1: USB disconnect, address 1 [ 1685.305311] usb 1-2: USB disconnect, address 3 [ 1685.305313] usb 1-2.2: USB disconnect, address 4 [ 1685.399836] ehci_hcd 0000:00:12.2: force halt; handhake ffffc2000004a024 0000c000 00000000 -> -110 [ 1685.411356] ehci_hcd 0000:00:12.2: USB bus 1 deregistered [ 1685.411537] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 1686.874095] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1686.874111] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1686.874309] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1686.874393] ehci_hcd 0000:00:12.2: debug port 1 [ 1686.874407] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 1686.883176] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1686.883297] usb usb1: configuration #1 chosen from 1 choice [ 1686.883320] hub 1-0:1.0: USB hub found [ 1686.883327] hub 1-0:1.0: 6 ports detected [ 1687.089941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1687.089946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1687.089948] usb usb1: Product: EHCI Host Controller [ 1687.089949] usb usb1: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 1687.089950] usb usb1: SerialNumber: 0000:00:12.2 [ 1687.090179] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1687.090192] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1687.090303] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1687.090384] ehci_hcd 0000:00:13.2: debug port 1 [ 1687.090397] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 1687.197351] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1687.206511] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1687.206590] usb usb2: configuration #1 chosen from 1 choice [ 1687.206612] hub 2-0:1.0: USB hub found [ 1687.206619] hub 2-0:1.0: 6 ports detected [ 1687.309946] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1687.309950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1687.309952] usb usb2: Product: EHCI Host Controller [ 1687.309953] usb usb2: Manufacturer: Linux 2.6.27.4r4 ehci_hcd [ 1687.309954] usb usb2: SerialNumber: 0000:00:13.2 [ 1687.332439] usb 1-2: configuration #1 chosen from 1 choice [ 1687.332654] hub 1-2:1.0: USB hub found [ 1687.336182] hub 1-2:1.0: 4 ports detected [ 1687.544102] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1687.544106] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1687.544107] usb 1-2: Product: USB2.0 Hub [ 1687.610991] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 1687.701404] usb 1-2.2: configuration #1 chosen from 1 choice [ 1687.711835] input: Logitech USB Receiver as /class/input/input11 [ 1687.758335] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 1687.767852] input: Logitech USB Receiver as /class/input/input12 [ 1687.816583] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2 [ 1687.816756] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 1687.816760] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1687.816761] usb 1-2.2: Product: USB Receiver [ 1687.816762] usb 1-2.2: Manufacturer: Logitech