| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1225671037.8772.30.camel@localhost>
Date: Sun, 02 Nov 2008 17:10:36 -0700
From: Myron Stowe <myron.stowe@...com>
To: Zhao Yakui <yakui.zhao@...el.com>
Cc: "lenb@...nel.org" <lenb@...nel.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Alexey Starikovskiy <aystarik@...il.com>
Subject: Re: [PATCH v2 2/3] ACPI: Behave uniquely based on processor
declaration definition type
On Fri, 2008-10-31 at 09:19 +0800, Zhao Yakui wrote:
> On Fri, 2008-10-31 at 06:13 +0800, Myron Stowe wrote:
> > Associating a Local SAPIC with a processor object is dependent upon the
> > processor object's definition type. CPUs declared as "Processor" should
> > use the Local SAPIC's 'processor_id', and CPUs declared as "Device"
> > should use the 'uid'. Note that for "Processor" declarations, even if a
> > '_UID' child object exists, it has no bearing with respect to mapping
> > Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced
> > Configuration and Power Interface Specification", Revision 3.0b).
> >
> > This patch changes the lsapic mapping logic to rely on the distinction of
> > how the processor object was declared - the mapping can't just try both
> > types of matches irregardless of declaration type and rely on one failing
> > as is currently being done.
> >
> > Signed-off-by: Myron Stowe <myron.stowe@...com>
> > Cc: Alexey Starikovskiy <aystarik@...il.com>
> > Cc: Zhao Yakui <yakui.zhao@...el.com>
> > ---
> >
> > drivers/acpi/processor_core.c | 75 +++++++++++++++++++++++------------------
> > 1 files changed, 42 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
> > index 0c670dd..35d33e8 100644
> > --- a/drivers/acpi/processor_core.c
> > +++ b/drivers/acpi/processor_core.c
> > @@ -410,7 +410,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device)
> > /* Use the acpiid in MADT to map cpus in case of SMP */
> >
> > #ifndef CONFIG_SMP
> > -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;}
> > +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
> > #else
> >
> > static struct acpi_table_madt *madt;
> > @@ -429,27 +429,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
> > }
> >
> > static int map_lsapic_id(struct acpi_subtable_header *entry,
> > - u32 acpi_id, int *apic_id)
> > + int device_declaration, u32 acpi_id, int *apic_id)
> > {
> > struct acpi_madt_local_sapic *lsapic =
> > (struct acpi_madt_local_sapic *)entry;
> > + u32 tmp = (lsapic->id << 8) | lsapic->eid;
> > +
> > /* Only check enabled APICs*/
> > - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
> > - /* First check against id */
> > - if (lsapic->processor_id == acpi_id) {
> > - *apic_id = (lsapic->id << 8) | lsapic->eid;
> > - return 1;
> > - /* Check against optional uid */
> > - } else if (entry->length >= 16 &&
> > - lsapic->uid == acpi_id) {
> > - *apic_id = lsapic->uid;
> > - return 1;
> > - }
> > - }
> > + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
> > + return 0;
> > +
> > + /* Device statement declaration type */
> > + if (device_declaration) {
> > + if (entry->length < 16)
> > + printk(KERN_ERR PREFIX
> > + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
> > + tmp);
> > + else if (lsapic->uid == acpi_id)
> > + goto found;
> > + /* Processor statement declaration type */
> > + } else if (lsapic->processor_id == acpi_id)
> > + goto found;
> > +
> > return 0;
> > +found:
> > + *apic_id = tmp;
> > + return 1;
> > }
> >
> > -static int map_madt_entry(u32 acpi_id)
> > +static int map_madt_entry(int type, u32 acpi_id)
> > {
> > unsigned long madt_end, entry;
> > int apic_id = -1;
> > @@ -470,7 +478,7 @@ static int map_madt_entry(u32 acpi_id)
> > if (map_lapic_id(header, acpi_id, &apic_id))
> > break;
> > } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
> > - if (map_lsapic_id(header, acpi_id, &apic_id))
> > + if (map_lsapic_id(header, type, acpi_id, &apic_id))
> > break;
> > }
> > entry += header->length;
> > @@ -478,7 +486,7 @@ static int map_madt_entry(u32 acpi_id)
> > return apic_id;
> > }
> >
> > -static int map_mat_entry(acpi_handle handle, u32 acpi_id)
> > +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
> > {
> > struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> > union acpi_object *obj;
> > @@ -501,7 +509,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id)
> > if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
> > map_lapic_id(header, acpi_id, &apic_id);
> > } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
> > - map_lsapic_id(header, acpi_id, &apic_id);
> > + map_lsapic_id(header, type, acpi_id, &apic_id);
> > }
> >
> > exit:
> > @@ -510,14 +518,14 @@ exit:
> > return apic_id;
> > }
> >
> > -static int get_cpu_id(acpi_handle handle, u32 acpi_id)
> > +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
> > {
> > int i;
> > int apic_id = -1;
> >
> > - apic_id = map_mat_entry(handle, acpi_id);
> > + apic_id = map_mat_entry(handle, type, acpi_id);
> > if (apic_id == -1)
> > - apic_id = map_madt_entry(acpi_id);
> > + apic_id = map_madt_entry(type, acpi_id);
> > if (apic_id == -1)
> > return apic_id;
> >
> > @@ -533,15 +541,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id)
> > Driver Interface
> > -------------------------------------------------------------------------- */
> >
> > -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > +static int acpi_processor_get_info(struct acpi_device *device)
> > {
> > acpi_status status = 0;
> > union acpi_object object = { 0 };
> > struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
> > - int cpu_index;
> > + struct acpi_processor *pr;
> > + int cpu_index, device_declaration = 0;
> > static int cpu0_initialized;
> >
> > -
> > + pr = acpi_driver_data(device);
> > if (!pr)
> > return -EINVAL;
> >
> > @@ -562,8 +571,11 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> > "No bus mastering arbitration control\n"));
> >
> > - /* Check if it is a Device with HID and UID */
> > - if (has_uid) {
> > + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
> > + /*
> > + * Declared with "Device" statement; match _UID.
> > + * Note that we don't handle string _UIDs yet.
> Looks very good.
> Can you add the check whether the device.flags.unique_id exists before
> evaluating the _UID object?
> If not exist, it indicates that the processor definition is incorrect.
The additional check would create a relationship with
'device.flags.unique_id' which seems redundant and would introduce
unnecessary complexity going forward. While such an additional check
would possibly short circuit the call to 'acpi_evaluate_integer()' -
when FW is in error and a _UID child object does not exist; a case that
is already caught - this code is not in a performance path and thus
seems to yield no benefit.
Was there some other aspect that you were thinking of?
Myron
> Thanks.
> > + */
> > unsigned long long value;
> > status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
> > NULL, &value);
> > @@ -571,13 +583,10 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > printk(KERN_ERR PREFIX "Evaluating processor _UID\n");
> > return -ENODEV;
> > }
> > + device_declaration = 1;
> > pr->acpi_id = value;
> > } else {
> > - /*
> > - * Evalute the processor object. Note that it is common on SMP to
> > - * have the first (boot) processor with a valid PBLK address while
> > - * all others have a NULL address.
> > - */
> > + /* Declared with "Processor" statement; match ProcessorID */
> > status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
> > if (ACPI_FAILURE(status)) {
> > printk(KERN_ERR PREFIX "Evaluating processor object\n");
> > @@ -590,7 +599,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > */
> > pr->acpi_id = object.processor.proc_id;
> > }
> > - cpu_index = get_cpu_id(pr->handle, pr->acpi_id);
> > + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
> >
> > /* Handle UP system running SMP kernel, with no LAPIC in MADT */
> > if (!cpu0_initialized && (cpu_index == -1) &&
> > @@ -662,7 +671,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
> >
> > pr = acpi_driver_data(device);
> >
> > - result = acpi_processor_get_info(pr, device->flags.unique_id);
> > + result = acpi_processor_get_info(device);
> > if (result) {
> > /* Processor is physically not present */
> > return 0;
> >
>
--
Myron Stowe HP Open Source & Linux Org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists