[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Linux version 2.6.28-rc3eeepc (alan@alan-desktop) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #123 Tue Nov 4 13:40:44 GMT 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f780000 (usable) [ 0.000000] BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved) [ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x1f780 max_arch_pfn = 0x1000000 [ 0.000000] kernel direct mapping tables up to 1f780000 @ 10000-16000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 1f3e0000 - 1f76f121 [ 0.000000] ACPI: RSDP 000FBE60, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 1F780000, 0034 (r1 A M I OEMRSDT 3000803 MSFT 97) [ 0.000000] ACPI: FACP 1F780200, 0081 (r1 A M I OEMFACP 3000803 MSFT 97) [ 0.000000] ACPI: DSDT 1F780400, 5F61 (r1 A0797 A0797000 0 INTL 20051117) [ 0.000000] ACPI: FACS 1F790000, 0040 [ 0.000000] ACPI: APIC 1F780390, 0068 (r1 A M I OEMAPIC 3000803 MSFT 97) [ 0.000000] ACPI: OEMB 1F790040, 0046 (r1 A M I AMI_OEM 3000803 MSFT 97) [ 0.000000] ACPI: MCFG 1F786370, 003C (r1 A M I OEMMCFG 3000803 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 503MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1f780000 [ 0.000000] low ram: 00000000 - 1f780000 [ 0.000000] bootmap 00013000 - 00016ef0 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001f780000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 00004648a4] TEXT DATA BSS ==> [0000100000 - 00004648a4] [ 0.000000] #2 [001f3e0000 - 001f76f121] RAMDISK ==> [001f3e0000 - 001f76f121] [ 0.000000] #3 [0000465000 - 000046c000] INIT_PG_TABLE ==> [0000465000 - 000046c000] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #6 [0000013000 - 0000017000] BOOTMAP ==> [0000013000 - 0000017000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001f780 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001f780 [ 0.000000] On node 0 totalpages: 128783 [ 0.000000] free_area_init_node: node 0, pgdat c03be710, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123825 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: INTEL [ 0.000000] MPTABLE: Product ID: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #1 Version 32 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127776 [ 0.000000] Kernel command line: root=/dev/sda1 resume=/dev/sda1 resume_offset=12453 ro vga=0xf07 noapic notsc [ 0.000000] notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely. [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 630.013 MHz processor. [ 0.000000] Console: colour VGA+ 80x60 [ 0.000000] console [tty0] enabled [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 503408k/515584k available (1646k kernel code, 11620k reserved, 1208k data, 256k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) [ 0.000000] vmalloc : 0xdff80000 - 0xfffaa000 ( 512 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB) [ 0.000000] .init : 0xc03cc000 - 0xc040c000 ( 256 kB) [ 0.000000] .data : 0xc029bb06 - 0xc03c9c70 (1208 kB) [ 0.000000] .text : 0xc0100000 - 0xc029bb06 (1646 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.52 BogoMIPS (lpj=2100043) [ 0.003333] Mount-cache hash table entries: 512 [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 512K [ 0.003333] Intel machine check architecture supported. [ 0.003333] Intel machine check reporting enabled on CPU#0. [ 0.003333] CPU: Intel(R) Celeron(R) M processor 900MHz stepping 08 [ 0.003333] Checking 'hlt' instruction... OK. [ 0.016665] Freeing SMP alternatives: 0k freed [ 0.016665] ACPI: Core revision 20080926 [ 0.036665] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.039999] net_namespace: 740 bytes [ 0.039999] NET: Registered protocol family 16 [ 0.039999] ACPI: bus type pci registered [ 0.039999] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.039999] PCI: Not using MMCONFIG. [ 0.039999] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.039999] PCI: Using configuration type 1 for base access [ 0.046665] ACPI: EC: Look up EC in DSDT [ 0.066665] ACPI: Interpreter enabled [ 0.066665] ACPI: (supports S0 S1 S3 S4 S5) [ 0.066665] ACPI: Using PIC for interrupt routing [ 0.066665] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.073332] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.073332] PCI: Using MMCONFIG for extended config space [ 0.089999] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.089999] ACPI: EC: driver started in poll mode [ 0.089999] ACPI: No dock devices found. [ 0.089999] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.089999] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff] [ 0.089999] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07] [ 0.089999] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.089999] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff] [ 0.089999] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff] [ 0.089999] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff] [ 0.089999] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.089999] pci 0000:00:1b.0: PME# disabled [ 0.089999] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.089999] pci 0000:00:1c.0: PME# disabled [ 0.089999] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.089999] pci 0000:00:1c.1: PME# disabled [ 0.089999] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.089999] pci 0000:00:1c.2: PME# disabled [ 0.093332] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f] [ 0.093332] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f] [ 0.093332] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f] [ 0.093332] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f] [ 0.093332] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff] [ 0.093332] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.093332] pci 0000:00:1d.7: PME# disabled [ 0.093332] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.093332] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.093332] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.093332] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.093332] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.093332] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.093332] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.093332] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf] [ 0.093332] pci 0000:00:1f.2: PME# supported from D3hot [ 0.093332] pci 0000:00:1f.2: PME# disabled [ 0.093332] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.093332] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff] [ 0.093332] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff] [ 0.093332] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.093332] pci 0000:03:00.0: PME# disabled [ 0.093332] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.093332] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.093332] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff] [ 0.093332] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.096665] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff] [ 0.096665] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff] [ 0.096665] pci 0000:00:1e.0: transparent bridge [ 0.096665] bus 00 -> node 0 [ 0.096665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.096665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.096665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.096665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.109998] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.109998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.109998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.109998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.113332] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.113332] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.113332] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.116665] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.116665] SCSI subsystem initialized [ 0.116665] libata version 3.00 loaded. [ 0.116665] PCI: Using ACPI for IRQ routing [ 0.119998] hpet clockevent registered [ 0.119998] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.119998] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.119998] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.123332] pnp: PnP ACPI init [ 0.123332] ACPI: bus type pnp registered [ 0.126670] Switched to NOHz mode on CPU #0 [ 0.130007] pnp: PnP ACPI: found 13 devices [ 0.130007] ACPI: ACPI bus type pnp unregistered [ 0.130007] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.130007] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.130007] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.130007] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.130007] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.130007] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.130007] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.130007] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.130007] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.130007] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.130007] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.137589] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.137589] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.137589] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.137589] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.137589] system 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved [ 0.173337] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.173337] pci 0000:00:1c.0: IO window: disabled [ 0.173337] pci 0000:00:1c.0: MEM window: disabled [ 0.173337] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.173337] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.173337] pci 0000:00:1c.1: IO window: disabled [ 0.173337] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff [ 0.173337] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.173337] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01 [ 0.173337] pci 0000:00:1c.2: IO window: disabled [ 0.173337] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff [ 0.173337] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff [ 0.173337] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.173337] pci 0000:00:1e.0: IO window: disabled [ 0.173337] pci 0000:00:1e.0: MEM window: disabled [ 0.173337] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.173337] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 [ 0.173337] PCI: setting IRQ 5 as level-triggered [ 0.173337] pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.173337] pci 0000:00:1c.0: setting latency timer to 64 [ 0.173337] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.176707] PCI: setting IRQ 11 as level-triggered [ 0.176707] pci 0000:00:1c.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.176707] pci 0000:00:1c.1: setting latency timer to 64 [ 0.176707] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.176707] PCI: setting IRQ 10 as level-triggered [ 0.176707] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.176707] pci 0000:00:1c.2: setting latency timer to 64 [ 0.176707] pci 0000:00:1e.0: setting latency timer to 64 [ 0.176707] bus: 00 index 0 io port: [0x00-0xffff] [ 0.176707] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.176707] bus: 04 index 0 mmio: [0x0-0x0] [ 0.176707] bus: 04 index 1 mmio: [0x0-0x0] [ 0.176707] bus: 04 index 2 mmio: [0x0-0x0] [ 0.176707] bus: 04 index 3 mmio: [0x0-0x0] [ 0.176707] bus: 03 index 0 mmio: [0x0-0x0] [ 0.176707] bus: 03 index 1 mmio: [0xfbf00000-0xfbffffff] [ 0.176707] bus: 03 index 2 mmio: [0x0-0x0] [ 0.176707] bus: 03 index 3 mmio: [0x0-0x0] [ 0.176707] bus: 01 index 0 mmio: [0x0-0x0] [ 0.176707] bus: 01 index 1 mmio: [0xf8000000-0xfbefffff] [ 0.176707] bus: 01 index 2 mmio: [0xf0000000-0xf6ffffff] [ 0.176707] bus: 01 index 3 mmio: [0x0-0x0] [ 0.176707] bus: 05 index 0 mmio: [0x0-0x0] [ 0.176707] bus: 05 index 1 mmio: [0x0-0x0] [ 0.176707] bus: 05 index 2 mmio: [0x0-0x0] [ 0.176707] bus: 05 index 3 io port: [0x00-0xffff] [ 0.176707] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.176707] NET: Registered protocol family 2 [ 0.179669] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.183003] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.183003] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.183003] TCP: Hash tables configured (established 16384 bind 16384) [ 0.183003] TCP reno registered [ 0.183003] NET: Registered protocol family 1 [ 0.183003] checking if image is initramfs... it is [ 1.030027] Freeing initrd memory: 3644k freed [ 1.030027] audit: initializing netlink socket (disabled) [ 1.030027] type=2000 audit(1225807886.030:1): initialized [ 1.050008] msgmni has been set to 990 [ 1.050008] alg: No test for stdrng (krng) [ 1.050008] io scheduler noop registered [ 1.050008] io scheduler anticipatory registered [ 1.050008] io scheduler deadline registered [ 1.050008] io scheduler cfq registered (default) [ 1.050008] pci 0000:00:02.0: Boot video device [ 1.056675] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.056675] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.056675] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X [ 1.056675] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.056675] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.056675] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.056675] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.056675] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.056675] pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X [ 1.056675] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.056675] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.056675] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.056675] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.056675] pcieport-driver 0000:00:1c.2: found MSI capability [ 1.056675] pcieport-driver 0000:00:1c.2: irq 45 for MSI/MSI-X [ 1.056675] pci_express 0000:00:1c.2:pcie00: allocate port service [ 1.056675] pci_express 0000:00:1c.2:pcie02: allocate port service [ 1.056675] pci_express 0000:00:1c.2:pcie03: allocate port service [ 1.066675] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 1.070011] brd: module loaded [ 1.070011] Driver 'sd' needs updating - please use bus_type methods [ 1.070011] ahci 0000:00:1f.2: version 3.0 [ 1.073345] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 [ 1.073345] PCI: setting IRQ 7 as level-triggered [ 1.073345] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 1.073345] ahci 0000:00:1f.2: PCI INT B disabled [ 1.073345] ahci: probe of 0000:00:1f.2 failed with error -22 [ 1.073345] ata_piix 0000:00:1f.2: version 2.12 [ 1.073345] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 1.073345] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.073345] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.073345] scsi0 : ata_piix [ 1.073345] scsi1 : ata_piix [ 1.073345] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.073345] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.400001] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66 [ 1.400001] ata2.00: 7815024 sectors, multi 0: LBA [ 1.413334] ata2.00: configured for UDMA/66 [ 1.413334] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 [ 1.413334] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB) [ 1.413334] sd 1:0:0:0: [sda] Write Protect is off [ 1.413334] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.413334] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.413334] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB) [ 1.413334] sd 1:0:0:0: [sda] Write Protect is off [ 1.413334] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.413334] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.413334] sda: sda1 [ 1.413334] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.415945] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.446084] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.446084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.449417] mice: PS/2 mouse device common for all mice [ 1.449417] rtc_cmos 00:03: RTC can wake from S4 [ 1.449417] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.449417] rtc0: alarms up to one month, 114 bytes nvram, , hpet irqs irqs [ 1.449417] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 1.449417] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) [ 1.449417] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.449417] iTCO_vendor_support: vendor-support=0 [ 1.449417] cpuidle: using governor ladder [ 1.449417] cpuidle: using governor menu [ 1.449417] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 1.449417] ALSA device list: [ 1.449417] No soundcards found. [ 1.450013] TCP cubic registered [ 1.450013] Using IPI Shortcut mode [ 1.451426] rtc_cmos 00:03: setting system clock to 2008-11-04 14:11:27 UTC (1225807887) [ 1.451426] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 1.451426] Freeing unused kernel memory: 256k freed [ 1.496683] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.900004] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.900004] processor ACPI0007:00: registered as cooling_device0 [ 1.900004] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.910013] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1.912364] Marking TSC unstable due to TSC halts in idle [ 1.918425] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.933865] ACPI: Thermal Zone [TZ00] (48 C) [ 2.373352] PM: Starting manual resume from disk [ 3.460002] usbcore: registered new interface driver usbfs [ 3.460002] input: PC Speaker as /class/input/input1 [ 3.463345] usbcore: registered new interface driver hub [ 3.466707] usbcore: registered new device driver usb [ 3.490010] usbcore: registered new interface driver libusual [ 3.503345] Initializing USB Mass Storage driver... [ 3.503345] usbcore: registered new interface driver usb-storage [ 3.503345] USB Mass Storage support registered. [ 3.520010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.520010] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 [ 3.520010] PCI: setting IRQ 3 as level-triggered [ 3.520010] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 3.520010] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.520010] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.520010] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.526676] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.526676] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.526676] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xf7eb7c00 [ 3.543342] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.543342] udev: starting version 131 [ 3.543342] udev: deprecated sysfs layout (kernel too old, or CONFIG_SYSFS_DEPRECATED) is unsupported, some udev features may fail [ 3.543342] usb usb1: configuration #1 chosen from 1 choice [ 3.543356] hub 1-0:1.0: USB hub found [ 3.543356] hub 1-0:1.0: 8 ports detected [ 3.553354] uhci_hcd: USB Universal Host Controller Interface driver [ 3.553354] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 3.556726] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.556726] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.556726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.556726] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000e400 [ 3.556726] usb usb2: configuration #1 chosen from 1 choice [ 3.556726] hub 2-0:1.0: USB hub found [ 3.556726] hub 2-0:1.0: 2 ports detected [ 3.556726] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 3.556726] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.556726] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.556726] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.556726] uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e480 [ 3.556726] usb usb3: configuration #1 chosen from 1 choice [ 3.556726] hub 3-0:1.0: USB hub found [ 3.556726] hub 3-0:1.0: 2 ports detected [ 3.556726] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 3.556726] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.556726] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.556726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.556726] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e800 [ 3.560059] usb usb4: configuration #1 chosen from 1 choice [ 3.560059] hub 4-0:1.0: USB hub found [ 3.560059] hub 4-0:1.0: 2 ports detected [ 3.560059] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 3.563387] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.563387] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.563387] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.563387] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000e880 [ 3.563387] usb usb5: configuration #1 chosen from 1 choice [ 3.563387] hub 5-0:1.0: USB hub found [ 3.563387] hub 5-0:1.0: 2 ports detected [ 3.850022] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 3.976684] usb 1-5: configuration #1 chosen from 1 choice [ 3.986683] scsi2 : SCSI emulation for USB Mass Storage devices [ 3.993357] usb-storage: device found at 2 [ 3.993357] usb-storage: waiting for device to settle before scanning [ 4.353346] Linux agpgart interface v0.103 [ 4.363346] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 4.363346] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 4.376689] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 4.376689] input: Power Button (FF) as /class/input/input2 [ 4.403351] ACPI: Power Button (FF) [PWRF] [ 4.403351] input: Lid Switch as /class/input/input3 [ 4.423346] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.426683] ACPI: Lid Switch [LID] [ 4.426683] eeepc: Eee PC Hotkey Driver [ 4.426683] eeepc: Hotkey init flags 0x41 [ 4.426683] eeepc: Get control methods supported: 0x101711 [ 4.426683] input: Asus EeePC extra buttons as /class/input/input4 [ 4.440018] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0 [ 4.440018] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded [ 4.440018] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0 [ 4.460020] input: Sleep Button (CM) as /class/input/input5 [ 4.486693] ACPI: Sleep Button (CM) [SLPB] [ 4.486693] input: Power Button (CM) as /class/input/input6 [ 4.513352] ACPI: Power Button (CM) [PWRB] [ 4.740023] intel_rng: FWH not detected [ 5.446477] pciehp 0000:00:1c.1:pcie02: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 5.446477] pciehp 0000:00:1c.1:pcie02: Cannot add device at 0000:03:00 [ 5.446477] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded [ 5.446477] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0 [ 5.446477] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 5.446477] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.516684] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.763349] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000 [ 5.900019] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 6.446720] pciehp 0000:00:1c.2:pcie02: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add [ 6.446720] pciehp 0000:00:1c.2:pcie02: Cannot add device at 0000:01:00 [ 6.446720] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded [ 6.446720] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.446720] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.456687] ACPI: AC Adapter [AC0] (on-line) [ 6.716681] cfg80211: Using static regulatory domain info [ 6.716681] cfg80211: Regulatory domain: US [ 6.716681] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.716681] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 6.716681] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.716681] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.716681] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.723018] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.723018] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 6.723018] cfg80211: Calling CRDA for country: US [ 6.836685] ath5k_pci 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 6.836685] ath5k_pci 0000:01:00.0: setting latency timer to 64 [ 6.836685] ath5k_pci 0000:01:00.0: registered as 'phy0' [ 6.923345] phy0: Selected rate control algorithm 'pid' [ 6.945173] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 6.956687] udev: renamed network interface wlan0 to ath0 [ 7.096077] ACPI: Battery Slot [BAT0] (battery present) [ 7.096077] input: Video Bus as /class/input/input8 [ 7.104476] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 7.280008] fuse init (API version 7.10) [ 8.994654] usb-storage: device scan complete [ 8.994654] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0 [ 9.365279] sd 2:0:0:0: [sdb] 15660032 512-byte hardware sectors: (8.01 GB/7.46 GiB) [ 9.365603] sd 2:0:0:0: [sdb] Write Protect is off [ 9.365603] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.365603] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.373109] sd 2:0:0:0: [sdb] 15660032 512-byte hardware sectors: (8.01 GB/7.46 GiB) [ 9.376669] sd 2:0:0:0: [sdb] Write Protect is off [ 9.376669] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.376669] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.376669] sdb: sdb1 [ 9.376669] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 9.376669] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 21.703339] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 21.753073] aes_i586: Unknown symbol crypto_it_tab [ 21.753073] aes_i586: Unknown symbol crypto_aes_set_key [ 21.753073] aes_i586: Unknown symbol crypto_fl_tab [ 21.755055] aes_i586: Unknown symbol crypto_il_tab [ 21.755055] aes_i586: Unknown symbol crypto_ft_tab [ 21.813353] aes_i586: Unknown symbol crypto_it_tab [ 21.816686] aes_i586: Unknown symbol crypto_aes_set_key [ 21.816686] aes_i586: Unknown symbol crypto_fl_tab [ 21.816686] aes_i586: Unknown symbol crypto_il_tab [ 21.816686] aes_i586: Unknown symbol crypto_ft_tab [ 22.130004] Adding 409592k swap on /swapfile. Priority:-1 extents:704 across:581464k [ 22.873341] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.940008] nf_conntrack version 0.5.0 (8056 buckets, 32224 max) [ 22.940008] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 22.940008] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 22.940008] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 23.083334] NET: Registered protocol family 10 [ 23.086682] lo: Disabled Privacy Extensions [ 23.103341] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.527020] sensors[4047]: segfault at 46 ip b7dfd2cd sp bfa2b6c0 error 4 in libc-2.7.so[b7da3000+149000] [ 23.527020] sensors[4048]: segfault at 46 ip b7dd52cd sp bfe052b0 error 4 in libc-2.7.so[b7d7b000+149000] [ 24.374482] ACPI: WMI: Mapper loaded [ 26.011042] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 27.773335] [drm] Initialized drm 1.1.0 20060810 [ 27.800003] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 27.800003] pci 0000:00:02.0: setting latency timer to 64 [ 27.800003] [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling. [ 27.800003] [drm:i915_driver_load] *ERROR* failed to enable MSI [ 27.800003] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 28.517066] ADDRCONF(NETDEV_UP): ath0: link is not ready [ 29.502679] evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html [ 102.799993] NET: Registered protocol family 17 [ 104.166663] ath0: authenticate with AP 00:1b:9e:19:45:90 [ 104.173334] ath0: authenticated [ 104.173334] ath0: associate with AP 00:1b:9e:19:45:90 [ 104.173334] ath0: RX AssocResp from 00:1b:9e:19:45:90 (capab=0x431 status=0 aid=1) [ 104.173334] ath0: associated [ 104.176666] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 125.509995] ath0: no IPv6 routers present [ 176.640414] pciehp 0000:00:1c.2:pcie02: Card not present on Slot(3) [ 176.870000] ath5k_pci 0000:01:00.0: PCI INT A disabled [ 182.568269] pciehp 0000:00:1c.2:pcie02: Card present on Slot(3) [ 184.673322] pci 0000:01:00.0: reg 10 64bit mmio: [0x000000-0x00ffff] [ 184.673322] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 184.673322] pciehp: Could not get hotplug parameters [ 184.673322] ath5k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 184.673322] ath5k_pci 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 184.673322] ath5k_pci 0000:01:00.0: setting latency timer to 64 [ 184.673322] ath5k_pci 0000:01:00.0: registered as 'phy1' [ 184.726665] phy1: Selected rate control algorithm 'pid' [ 184.729998] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 184.783334] udev: renamed network interface wlan0 to ath0 [ 184.917431] ADDRCONF(NETDEV_UP): ath0: link is not ready [ 198.136650] ath0: authenticate with AP 00:1b:9e:19:45:90 [ 198.143315] ath0: authenticated [ 198.143315] ath0: associate with AP 00:1b:9e:19:45:90 [ 198.146655] ath0: RX AssocResp from 00:1b:9e:19:45:90 (capab=0x431 status=0 aid=1) [ 198.146655] ath0: associated [ 198.146655] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 215.069987] ath0: no IPv6 routers present [ 215.459995] ath0: deauthenticating by local choice (reason=3) [ 216.058033] ADDRCONF(NETDEV_UP): ath0: link is not ready [ 218.569999] PM: Syncing filesystems ... done. [ 218.569999] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 218.569999] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 218.569999] Suspending console(s) (use no_console_suspend to debug) [ 218.569999] ath5k_pci 0000:01:00.0: PCI INT A disabled [ 218.586654] pci 0000:00:02.0: PCI INT A disabled [ 219.133354] sd 1:0:0:0: [sda] Stopping disk [ 219.133354] pciehp 0000:00:1c.2:pcie02: pciehp_suspend ENTRY [ 219.133354] pciehp 0000:00:1c.1:pcie02: pciehp_suspend ENTRY [ 219.133354] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 219.133354] ata_piix 0000:00:1f.2: PCI INT B disabled [ 219.146690] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 219.160024] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 219.160024] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 219.160024] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 219.160024] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 219.160024] pciehp 0000:00:1c.2:pcie02: pciehp_suspend ENTRY [ 219.160024] pciehp 0000:00:1c.1:pcie02: pciehp_suspend ENTRY [ 219.160024] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 219.173319] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 219.186691] ACPI: Preparing to enter system sleep state S3 [ 219.186691] Intel machine check architecture supported. [ 219.186691] Intel machine check reporting enabled on CPU#0. [ 219.186691] Back to C! [ 219.186691] Force enabled HPET at resume [ 219.187675] ACPI: Waking up from system sleep state S3 [ 219.229984] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 219.531025] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003) [ 219.546692] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 219.546692] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 219.546692] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 219.546692] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 219.546692] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504) [ 219.546692] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 219.546692] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 220.550024] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 220.550024] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x180106, writing 0x100506) [ 220.550024] pciehp 0000:00:1c.1:pcie02: Card present on Slot(2) [ 220.550024] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 220.550024] pciehp 0000:00:1c.1:pcie02: pciehp_resume ENTRY [ 221.553319] pciehp 0000:00:1c.1:pcie02: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 221.553319] pciehp 0000:00:1c.1:pcie02: Cannot add device at 0000:03:00 [ 222.556689] pciehp 0000:00:1c.1:pcie02: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 222.556689] pciehp 0000:00:1c.1:pcie02: Cannot add device at 0000:03:00 [ 224.083318] irq 10: nobody cared (try booting with the "irqpoll" option) [ 224.083318] Pid: 5969, comm: pm-suspend Not tainted 2.6.28-rc3eeepc #123 [ 224.083318] Call Trace: [ 224.083318] [] __report_bad_irq+0x24/0x69 [ 224.083318] [] __report_bad_irq+0x2b/0x69 [ 224.083318] [] note_interrupt+0xed/0x133 [ 224.083318] [] handle_IRQ_event+0x1a/0x3f [ 224.083318] [] handle_level_irq+0x4d/0x8d [ 224.083318] [] do_IRQ+0x55/0x6c [ 224.083318] [] common_interrupt+0x23/0x28 [ 224.083318] [] __do_softirq+0x2a/0xbc [ 224.083318] [] do_softirq+0x22/0x26 [ 224.083318] [] irq_exit+0x25/0x55 [ 224.083318] [] smp_apic_timer_interrupt+0x5c/0x64 [ 224.083318] [] apic_timer_interrupt+0x28/0x30 [ 224.083318] [] pci_bus_write_config_word+0x28/0x2e [ 224.083318] [] pci_restore_state+0x79/0x15c [ 224.083318] [] resume_iter+0x0/0x25 [ 224.083318] [] pcie_portdrv_restore_config+0x9/0x22 [ 224.083318] [] pcie_portdrv_resume+0x8/0x10 [ 224.083318] [] pci_legacy_resume+0x15/0x16 [ 224.083318] [] pm_op+0x52/0xac [ 224.083318] [] device_resume+0x7d/0x2d2 [ 224.083318] [] suspend_devices_and_enter+0xc7/0xfb [ 224.083318] [] enter_state+0xdf/0x12e [ 224.083318] [] state_store+0x8e/0xa4 [ 224.083318] [] state_store+0x0/0xa4 [ 224.083318] [] kobj_attr_store+0x18/0x1c [ 224.083318] [] sysfs_write_file+0xaf/0xdc [ 224.083318] [] sysfs_write_file+0x0/0xdc [ 224.083318] [] vfs_write+0x83/0xf6 [ 224.083318] [] sys_write+0x3c/0x63 [ 224.083318] [] sysenter_do_call+0x12/0x21 [ 224.083318] [] __inet6_lookup_established+0x98/0x21c [ 224.083318] handlers: [ 224.083318] [] (usb_hcd_irq+0x0/0x57 [usbcore]) [ 224.083318] Disabling IRQ #10 [ 224.083318] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 224.083318] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x180106, writing 0x100506) [ 224.083318] pciehp 0000:00:1c.2:pcie02: Card present on Slot(3) [ 224.083318] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 224.083318] pciehp 0000:00:1c.2:pcie02: pciehp_resume ENTRY [ 225.090021] pciehp 0000:00:1c.2:pcie02: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add [ 225.090021] pciehp 0000:00:1c.2:pcie02: Cannot add device at 0000:01:00 [ 226.093356] pciehp 0000:00:1c.2:pcie02: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add [ 226.093356] pciehp 0000:00:1c.2:pcie02: Cannot add device at 0000:01:00 [ 226.093356] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 226.093356] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 226.093356] usb usb2: root hub lost power or was reset [ 226.093356] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 226.093356] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 226.093356] usb usb3: root hub lost power or was reset [ 226.093356] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 226.093356] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 226.093356] usb usb4: root hub lost power or was reset [ 226.093356] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 226.093356] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 226.093356] usb usb5: root hub lost power or was reset [ 226.106688] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 226.106688] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 226.106688] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x60000, writing 0x600ff) [ 226.106688] pci 0000:00:1e.0: setting latency timer to 64 [ 226.120022] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 226.120022] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 226.120022] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 226.296690] ata2.00: configured for UDMA/66 [ 226.296690] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors: (4.00 GB/3.72 GiB) [ 226.296690] sd 1:0:0:0: [sda] Write Protect is off [ 226.296690] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 226.296690] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 227.123356] pciehp 0000:00:1c.1:pcie02: pciehp_resume ENTRY [ 228.126687] pciehp 0000:00:1c.1:pcie02: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 228.126687] pciehp 0000:00:1c.1:pcie02: Cannot add device at 0000:03:00 [ 228.126687] pciehp 0000:00:1c.2:pcie02: pciehp_resume ENTRY [ 229.130022] pciehp 0000:00:1c.2:pcie02: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add [ 229.130022] pciehp 0000:00:1c.2:pcie02: Cannot add device at 0000:01:00 [ 229.130022] sd 1:0:0:0: [sda] Starting disk [ 229.386688] usb 1-5: reset high speed USB device using ehci_hcd and address 2 [ 230.623356] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 230.623356] pci 0000:00:02.0: setting latency timer to 64 [ 230.623356] ath5k_pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004) [ 230.623356] ath5k_pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 230.623356] ath5k_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 230.671002] ath5k_pci 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 230.696647] Restarting tasks ... done. [ 231.688554] ADDRCONF(NETDEV_UP): ath0: link is not ready [ 234.343355] evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html [ 245.923311] ath0: authenticate with AP 00:1b:9e:19:45:90 [ 245.926363] ath0: authenticated [ 245.926363] ath0: associate with AP 00:1b:9e:19:45:90 [ 245.929977] ath0: RX AssocResp from 00:1b:9e:19:45:90 (capab=0x431 status=0 aid=1) [ 245.929977] ath0: associated [ 245.929977] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 256.390018] ath0: no IPv6 routers present [ 271.316682] ath0: no IPv6 routers present