linux-kernel - Re: usb device not showing up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Pine.LNX.4.44L0.0811041134090.3614-100000@iolanthe.rowland.org>
Date:	Tue, 4 Nov 2008 11:36:24 -0500 (EST)
From:	Alan Stern <stern@...land.harvard.edu>
To:	Norbert Preining <preining@...ic.at>
cc:	Mattia Dongili <malattia@...ux.it>,
	Kernel development list <linux-kernel@...r.kernel.org>,
	USB list <linux-usb@...r.kernel.org>
Subject: Re: usb device not showing up

On Tue, 4 Nov 2008, Norbert Preining wrote:

> On Di, 04 Nov 2008, Alan Stern wrote:
> > > - First booting Vista, then RE-booting (not turning it off in the
> > >   meantime) into linux gives me that device and everything works.
> > 
> > By "it", did you mean the laptop or the modem?
> 
> I meant: 
> - first booting vista, then re-booting ... the device shows up (and is
>   functional)
> 
> - booting from off state the device does not show up and cannot be
>   switched on using /sys/devices/platform/sony-laptop/wwanpower
>   (although the behaviour that it can be switched on using the above
>   sysfs file is documented)
> 
> > No.  I'm interested in seeing the usbmon output for when the modem is
> > first detected by the USB subsystem.  During a normal boot this will 
> > happen before you can start usbmon.
> > 
> > If you can't boot with the modem off, then try this instead: Unload 
> > ehci-hcd, uhci-hcd, and ohci-hcd, then start up usbmon (copy the 0u 
> > file) and reload whichever driver the modem attaches to.
> 
> Ok, I will recompile my kernel with USB as modules and do the above. Is
> there a way to tell the kernel not to load any device drivers/modules
> (probably overriding modprobe in some way)?

You can add entries to /etc/modprobe.d/blacklist.  But for temporary 
testing, it might be easiest simply to rename the module files 
themselves (under /lib/modules/.../kernel/drivers/usb/host) so that the 
hotplug system can't find them.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/