[ 0.000000] BIOS EBDA/lowmem at: 0009d800/0009d800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.28-rc3-00054-g75fa677 (corsac@hidalgo) (gcc version 4.3.2 (Debian 4.3.2-1) ) #13 SMP Wed Nov 5 18:38:23 CET 2008 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.28-rc3-00054-g75fa677 root=/dev/mapper/hidalgo-root ro quiet usbcore.autosuspend=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000be6b0000 (usable) [ 0.000000] BIOS-e820: 00000000be6b0000 - 00000000be6cc000 (ACPI data) [ 0.000000] BIOS-e820: 00000000be6cc000 - 00000000be700000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbe6b0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-00000000be6b0000 [ 0.000000] 0000000000 - 00be600000 page 2M [ 0.000000] 00be600000 - 00be6b0000 page 4k [ 0.000000] kernel direct mapping tables up to be6b0000 @ 8000-d000 [ 0.000000] last_map_addr: be6b0000 end: be6b0000 [ 0.000000] RAMDISK: 377f0000 - 37fefacf [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT BE6BB77F, 0094 (r1 LENOVO TP-7L 2210 LTP 0) [ 0.000000] ACPI: FACP BE6BB900, 00F4 (r3 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926] [ 0.000000] ACPI: DSDT BE6BBD1D, FED1 (r1 LENOVO TP-7L 2210 MSFT 3000000) [ 0.000000] ACPI: FACS BE6E4000, 0040 [ 0.000000] ACPI: SSDT BE6BBAB4, 0269 (r1 LENOVO TP-7L 2210 MSFT 3000000) [ 0.000000] ACPI: ECDT BE6CBBEE, 0052 (r1 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI: TCPA BE6CBC40, 0032 (r2 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI: APIC BE6CBC72, 0068 (r1 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI: MCFG BE6CBCDA, 003C (r1 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI: HPET BE6CBD16, 0038 (r1 LENOVO TP-7L 2210 LNVO 1) [ 0.000000] ACPI: SLIC BE6CBDF0, 0176 (r1 LENOVO TP-7L 2210 LTP 0) [ 0.000000] ACPI: BOOT BE6CBF66, 0028 (r1 LENOVO TP-7L 2210 LTP 1) [ 0.000000] ACPI: ASF! BE6CBF8E, 0072 (r16 LENOVO TP-7L 2210 PTL 1) [ 0.000000] ACPI: SSDT BE6E26D9, 025F (r1 LENOVO TP-7L 2210 INTL 20050513) [ 0.000000] ACPI: SSDT BE6E2938, 00A6 (r1 LENOVO TP-7L 2210 INTL 20050513) [ 0.000000] ACPI: SSDT BE6E29DE, 04F7 (r1 LENOVO TP-7L 2210 INTL 20050513) [ 0.000000] ACPI: SSDT BE6E2ED5, 01D8 (r1 LENOVO TP-7L 2210 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000be6b0000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000be6b0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000b000 - 0000000000022cd7] pages 18 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00be6b0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000753408] TEXT DATA BSS ==> [0000200000 - 0000753408] [ 0.000000] #3 [00377f0000 - 0037fefacf] RAMDISK ==> [00377f0000 - 0037fefacf] [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f6900] 000f6900 [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000be6b0 [ 0.000000] On node 0 totalpages: 779853 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1469 pages reserved [ 0.000000] DMA zone: 2472 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10608 pages used for memmap [ 0.000000] DMA32 zone: 765248 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bf000000:31000000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 000000000101c000 [ 0.000000] per cpu data for cpu1 on node0 at 0000000001028000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 767720 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.28-rc3-00054-g75fa677 root=/dev/mapper/hidalgo-root ro quiet usbcore.autosuspend=1 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.260 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 3062372k/3119808k available (2602k kernel code, 396k absent, 57040k reserved, 1427k data, 472k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.52 BogoMIPS (lpj=8777040) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004605] Mount-cache hash table entries: 256 [ 0.004749] Initializing cgroup subsys ns [ 0.004752] Initializing cgroup subsys cpuacct [ 0.004771] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004772] CPU: L2 cache: 4096K [ 0.004774] CPU 0/0x0 -> Node 0 [ 0.004776] CPU: Physical Processor ID: 0 [ 0.004777] CPU: Processor Core ID: 0 [ 0.004782] CPU0: Thermal monitoring enabled (TM2) [ 0.004783] using mwait in idle threads. [ 0.004802] ACPI: Core revision 20080926 [ 0.028063] Setting APIC routing to flat [ 0.028439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070056] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4388.98 BogoMIPS (lpj=8777960) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.156521] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.156545] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.160001] Measured 1333046 cycles TSC warp between CPUs, turning off TSC clock. [ 0.160001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.160020] Brought up 2 CPUs [ 0.160022] Total of 2 processors activated (8777.50 BogoMIPS). [ 0.160106] net_namespace: 1400 bytes [ 0.160145] NET: Registered protocol family 16 [ 0.160145] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.160145] ACPI: bus type pci registered [ 0.160145] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.160145] PCI: MCFG area at f0000000 reserved in E820 [ 0.161793] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.161794] PCI: Using configuration type 1 for base access [ 0.165065] ACPI: EC: EC description table is found, configuring boot EC [ 0.172514] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.172026] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.198241] ACPI: Interpreter enabled [ 0.198244] ACPI: (supports S0 S3 S4 S5) [ 0.198264] ACPI: Using IOAPIC for interrupt routing [ 0.212437] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.212437] ACPI: EC: driver started in interrupt mode [ 0.216925] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.216936] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.216973] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.216973] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.216973] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.216973] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] [ 0.216973] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] [ 0.216973] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] [ 0.216973] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.216973] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.216973] pci 0000:00:19.0: PME# disabled [ 0.216973] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.216973] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.216973] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] [ 0.216973] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.216973] pci 0000:00:1a.7: PME# disabled [ 0.216973] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] [ 0.216973] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.216973] pci 0000:00:1b.0: PME# disabled [ 0.216973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.216973] pci 0000:00:1c.0: PME# disabled [ 0.216975] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.216982] pci 0000:00:1c.1: PME# disabled [ 0.217071] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.217080] pci 0000:00:1c.2: PME# disabled [ 0.217160] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.217166] pci 0000:00:1c.3: PME# disabled [ 0.220067] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.220076] pci 0000:00:1c.4: PME# disabled [ 0.220189] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] [ 0.220300] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] [ 0.220409] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] [ 0.220529] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] [ 0.220609] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.220616] pci 0000:00:1d.7: PME# disabled [ 0.220840] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.220846] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.220904] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.220918] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.220932] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.220944] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.220956] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] [ 0.221051] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] [ 0.221060] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] [ 0.221069] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] [ 0.221085] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] [ 0.221094] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.221105] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] [ 0.221130] pci 0000:00:1f.2: PME# supported from D3hot [ 0.221138] pci 0000:00:1f.2: PME# disabled [ 0.221188] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] [ 0.221215] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] [ 0.221315] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.221324] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.221336] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.221466] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] [ 0.221553] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.221566] pci 0000:03:00.0: PME# disabled [ 0.221645] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.221653] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] [ 0.221662] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] [ 0.221729] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.221737] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.221746] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] [ 0.221808] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.221814] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] [ 0.221823] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] [ 0.221891] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] [ 0.221900] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.221909] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] [ 0.221978] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.222001] pci 0000:15:00.0: supports D1 D2 [ 0.222003] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.222010] pci 0000:15:00.0: PME# disabled [ 0.222143] pci 0000:00:1e.0: transparent bridge [ 0.222152] pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] [ 0.222161] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] [ 0.222170] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.222257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.222584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.222734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.222884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.223034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.223186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.223338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.228171] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.228217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.228419] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.228649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.228878] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.229106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.229335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.229564] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.229661] ACPI: Power Resource [PUBS] (on) [ 0.229661] usbcore: registered new interface driver usbfs [ 0.229661] usbcore: registered new interface driver hub [ 0.229661] usbcore: registered new device driver usb [ 0.229661] PCI: Using ACPI for IRQ routing [ 0.244008] NET: Registered protocol family 8 [ 0.244009] NET: Registered protocol family 20 [ 0.244037] PCI-GART: No AMD GART found. [ 0.244037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.244037] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.252011] Switched to high resolution mode on CPU 0 [ 0.252571] Switched to high resolution mode on CPU 1 [ 0.261013] pnp: PnP ACPI init [ 0.261021] ACPI: bus type pnp registered [ 0.265835] pnp: PnP ACPI: found 11 devices [ 0.265837] ACPI: ACPI bus type pnp unregistered [ 0.265845] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.265848] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 0.265850] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 0.265852] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.265854] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.265857] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.265859] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.265862] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.265864] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.265866] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.265868] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.265871] system 00:00: iomem range 0x100000-0xbeffffff could not be reserved [ 0.265874] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.265876] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.265882] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.265885] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.265888] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.265891] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.265893] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.265896] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.265898] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.265901] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.265903] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.265905] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.265908] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.265911] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.271125] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.271130] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.271140] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.271149] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.271158] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.271163] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.271174] pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff [ 0.271180] pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff [ 0.271194] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.271199] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.271207] pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff [ 0.271213] pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff [ 0.271227] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.271232] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.271242] pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff [ 0.271249] pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff [ 0.271263] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 0.271268] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 0.271275] pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff [ 0.271282] pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff [ 0.271293] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.271294] pci 0000:15:00.0: IO window: 0x007000-0x0070ff [ 0.271304] pci 0000:15:00.0: IO window: 0x007400-0x0074ff [ 0.271311] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.271320] pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff [ 0.271328] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.271333] pci 0000:00:1e.0: IO window: 0x7000-0xafff [ 0.271340] pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff [ 0.271347] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.271374] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.271381] pci 0000:00:1c.0: setting latency timer to 64 [ 0.271397] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.271401] pci 0000:00:1c.1: setting latency timer to 64 [ 0.271414] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.271419] pci 0000:00:1c.2: setting latency timer to 64 [ 0.271434] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.271439] pci 0000:00:1c.3: setting latency timer to 64 [ 0.271450] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.271459] pci 0000:00:1c.4: setting latency timer to 64 [ 0.271468] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.271481] pci 0000:00:1e.0: setting latency timer to 64 [ 0.271497] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.271505] bus: 00 index 0 io port: [0x00-0xffff] [ 0.271507] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.271509] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.271511] bus: 02 index 1 mmio: [0xfc000000-0xfdffffff] [ 0.271512] bus: 02 index 2 mmio: [0xf8000000-0xf80fffff] [ 0.271514] bus: 02 index 3 mmio: [0x0-0x0] [ 0.271516] bus: 03 index 0 io port: [0x3000-0x3fff] [ 0.271517] bus: 03 index 1 mmio: [0xdc000000-0xdf3fffff] [ 0.271519] bus: 03 index 2 mmio: [0xdfe00000-0xdfefffff] [ 0.271521] bus: 03 index 3 mmio: [0x0-0x0] [ 0.271522] bus: 04 index 0 io port: [0x4000-0x4fff] [ 0.271524] bus: 04 index 1 mmio: [0xd8000000-0xd9ffffff] [ 0.271526] bus: 04 index 2 mmio: [0xdfb00000-0xdfbfffff] [ 0.271527] bus: 04 index 3 mmio: [0x0-0x0] [ 0.271529] bus: 05 index 0 io port: [0x5000-0x5fff] [ 0.271530] bus: 05 index 1 mmio: [0xd4000000-0xd5ffffff] [ 0.271532] bus: 05 index 2 mmio: [0xdf800000-0xdf8fffff] [ 0.271534] bus: 05 index 3 mmio: [0x0-0x0] [ 0.271535] bus: 0d index 0 io port: [0x6000-0x6fff] [ 0.271537] bus: 0d index 1 mmio: [0xd0000000-0xd1ffffff] [ 0.271539] bus: 0d index 2 mmio: [0xdf500000-0xdf5fffff] [ 0.271540] bus: 0d index 3 mmio: [0x0-0x0] [ 0.271542] bus: 15 index 0 io port: [0x7000-0xafff] [ 0.271544] bus: 15 index 1 mmio: [0xf8300000-0xfbffffff] [ 0.271545] bus: 15 index 2 mmio: [0xf4000000-0xf7ffffff] [ 0.271547] bus: 15 index 3 io port: [0x00-0xffff] [ 0.271549] bus: 15 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.271551] bus: 16 index 0 io port: [0x7000-0x70ff] [ 0.271552] bus: 16 index 1 io port: [0x7400-0x74ff] [ 0.271554] bus: 16 index 2 mmio: [0xf4000000-0xf7ffffff] [ 0.271556] bus: 16 index 3 mmio: [0xc0000000-0xc3ffffff] [ 0.271601] NET: Registered protocol family 2 [ 0.312149] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.313377] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.318634] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.319407] TCP: Hash tables configured (established 524288 bind 65536) [ 0.319410] TCP reno registered [ 0.328125] NET: Registered protocol family 1 [ 0.328231] checking if image is initramfs... it is [ 0.896963] Freeing initrd memory: 8190k freed [ 0.901060] Simple Boot Flag at 0x35 set to 0x1 [ 0.901773] alg: cipher: Test 1 failed on encryption for aes-asm [ 0.901834] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 [ 0.902207] audit: initializing netlink socket (disabled) [ 0.902221] type=2000 audit(1225908598.900:1): initialized [ 0.902517] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.902646] VFS: Disk quotas dquot_6.5.1 [ 0.902675] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.902730] msgmni has been set to 5997 [ 0.902797] alg: No test for cipher_null (cipher_null-generic) [ 0.902837] alg: No test for digest_null (digest_null-generic) [ 0.902857] alg: No test for compress_null (compress_null-generic) [ 0.903359] alg: No test for fcrypt (fcrypt-generic) [ 0.905366] alg: No test for stdrng (krng) [ 0.905378] io scheduler noop registered [ 0.905380] io scheduler anticipatory registered [ 0.905381] io scheduler deadline registered [ 0.905404] io scheduler cfq registered (default) [ 0.905761] pci 0000:00:02.0: Boot video device [ 0.914536] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.914583] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.914624] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X [ 0.914647] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.914690] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.914729] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.914844] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.914888] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.914926] pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X [ 0.914949] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.914987] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.915028] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.915132] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.915181] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.915214] pcieport-driver 0000:00:1c.2: irq 45 for MSI/MSI-X [ 0.915230] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.915269] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.915306] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.915415] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.915464] pcieport-driver 0000:00:1c.3: found MSI capability [ 0.915497] pcieport-driver 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.915513] pci_express 0000:00:1c.3:pcie00: allocate port service [ 0.915553] pci_express 0000:00:1c.3:pcie02: allocate port service [ 0.915591] pci_express 0000:00:1c.3:pcie03: allocate port service [ 0.915700] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.915755] pcieport-driver 0000:00:1c.4: found MSI capability [ 0.915789] pcieport-driver 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.915804] pci_express 0000:00:1c.4:pcie00: allocate port service [ 0.915844] pci_express 0000:00:1c.4:pcie02: allocate port service [ 0.915882] pci_express 0000:00:1c.4:pcie03: allocate port service [ 0.918618] Linux agpgart interface v0.103 [ 0.918620] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 0.920364] brd: module loaded [ 0.920548] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.931744] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.931749] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.931848] mice: PS/2 mouse device common for all mice [ 0.931916] device-mapper: uevent: version 1.0.3 [ 0.931994] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 0.932144] device-mapper: multipath: version 1.0.5 loaded [ 0.932146] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.932202] cpuidle: using governor ladder [ 0.932204] cpuidle: using governor menu [ 0.932444] TCP bic registered [ 0.932447] NET: Registered protocol family 17 [ 0.932605] registered taskstats version 1 [ 0.932768] Freeing unused kernel memory: 472k freed [ 0.937972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.007431] ACPI: SSDT BE6E1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 1.008029] ACPI: SSDT BE6E1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 1.011550] Monitor-Mwait will be used to enter C-1 state [ 1.011553] Monitor-Mwait will be used to enter C-2 state [ 1.011555] Monitor-Mwait will be used to enter C-3 state [ 1.011743] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.011798] processor ACPI0007:00: registered as cooling_device0 [ 1.011801] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.012172] ACPI: SSDT BE6E1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 1.012567] ACPI: SSDT BE6E1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 1.014477] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.014510] processor ACPI0007:01: registered as cooling_device1 [ 1.014513] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.017465] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.021468] ACPI: Thermal Zone [THM0] (56 C) [ 1.022549] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.023846] ACPI: Thermal Zone [THM1] (56 C) [ 1.141250] uhci_hcd: USB Universal Host Controller Interface driver [ 1.141291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.141304] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.141310] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.141381] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.141429] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 1.141504] usb usb1: configuration #1 chosen from 1 choice [ 1.141527] hub 1-0:1.0: USB hub found [ 1.141532] hub 1-0:1.0: 2 ports detected [ 1.142118] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 1.142123] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.142133] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.142138] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.142177] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.142215] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 1.142276] usb usb2: configuration #1 chosen from 1 choice [ 1.142299] hub 2-0:1.0: USB hub found [ 1.142304] hub 2-0:1.0: 2 ports detected [ 1.142900] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.142906] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.142916] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.142921] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.142959] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.142998] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 1.143062] usb usb3: configuration #1 chosen from 1 choice [ 1.143083] hub 3-0:1.0: USB hub found [ 1.143087] hub 3-0:1.0: 2 ports detected [ 1.143178] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.143187] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.143192] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.143229] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 1.143261] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 1.143324] usb usb4: configuration #1 chosen from 1 choice [ 1.143345] hub 4-0:1.0: USB hub found [ 1.143350] hub 4-0:1.0: 2 ports detected [ 1.143916] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 1.143923] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.143930] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.143935] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.143978] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 1.144015] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 1.144083] usb usb5: configuration #1 chosen from 1 choice [ 1.144106] hub 5-0:1.0: USB hub found [ 1.144111] hub 5-0:1.0: 2 ports detected [ 1.145498] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 1.145501] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.145544] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.145557] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.145693] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 1.162557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.162559] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.222638] SCSI subsystem initialized [ 1.231149] libata version 3.00 loaded. [ 1.358528] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:d2:4d:07 [ 1.358530] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.358568] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 1.359168] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 1.359179] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.359212] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.359218] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.359281] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 1.363219] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.363239] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 1.452099] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.464073] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.464147] usb usb6: configuration #1 chosen from 1 choice [ 1.464172] hub 6-0:1.0: USB hub found [ 1.464178] hub 6-0:1.0: 4 ports detected [ 1.464290] ahci 0000:00:1f.2: version 3.0 [ 1.464311] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.464365] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.464429] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode [ 1.464432] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 1.464438] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.464629] scsi0 : ahci [ 1.464782] scsi1 : ahci [ 1.464848] scsi2 : ahci [ 1.464917] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 41 [ 1.464919] ata2: DUMMY [ 1.464924] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 41 [ 1.504053] Clocksource tsc unstable (delta = -103642808 ns) [ 1.520125] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2.088097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.089286] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 2.089289] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.089515] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 2.089518] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.090426] ata1.00: ATA-7: HITACHI HTS541616J9SA00, SB4IC7VP, max UDMA/100 [ 2.090428] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.091817] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 2.091819] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.092046] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 2.092048] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.092978] ata1.00: configured for UDMA/100 [ 2.110188] ata1.00: configured for UDMA/100 [ 2.110190] ata1: EH complete [ 2.128092] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 2.289550] usb 1-1: configuration #1 chosen from 1 choice [ 2.460125] ata3: SATA link down (SStatus 0 SControl 300) [ 2.476201] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SB4I PQ: 0 ANSI: 5 [ 2.477241] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.477255] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.477284] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.477289] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.477369] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 2.481290] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.481302] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.481321] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 2.489000] Driver 'sd' needs updating - please use bus_type methods [ 2.489088] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.489100] sd 0:0:0:0: [sda] Write Protect is off [ 2.489102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.489119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.489170] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.489181] sd 0:0:0:0: [sda] Write Protect is off [ 2.489182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.489200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.489203] sda:<6>usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 2.544093] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.544158] usb usb7: configuration #1 chosen from 1 choice [ 2.544196] hub 7-0:1.0: USB hub found [ 2.544201] hub 7-0:1.0: 6 ports detected [ 2.712572] usb 1-2: configuration #1 chosen from 1 choice [ 2.894302] sda1 sda2 < sda5 > [ 2.902813] sd 0:0:0:0: [sda] Attached SCSI disk [ 76.893347] PM: Starting manual resume from disk [ 76.978744] kjournald starting. Commit interval 5 seconds [ 76.978811] EXT3-fs: mounted filesystem with ordered data mode. [ 84.837600] udevd version 125 started [ 85.256776] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 85.257862] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 85.260805] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 85.377908] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 85.393029] ACPI: Power Button (FF) [PWRF] [ 85.393212] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 85.393777] ACPI: Lid Switch [LID] [ 85.393949] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 85.401837] acpi device:03: registered as cooling_device2 [ 85.402136] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input4 [ 85.409024] ACPI: Sleep Button (CM) [SLPB] [ 85.420733] ACPI: AC Adapter [AC] (on-line) [ 85.425029] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 85.426853] acpi device:08: registered as cooling_device3 [ 85.427186] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input5 [ 85.440030] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 85.463129] ACPI Warning (nspredef-0858): \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] [ 85.502916] ACPI: Battery Slot [BAT0] (battery present) [ 85.512387] Bluetooth: Core ver 2.13 [ 85.533100] NET: Registered protocol family 31 [ 85.533219] Bluetooth: HCI device and connection manager initialized [ 85.533339] Bluetooth: HCI socket layer initialized [ 85.709062] cfg80211: Using static regulatory domain info [ 85.709179] cfg80211: Regulatory domain: EU [ 85.709297] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 85.709478] (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 85.709598] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 85.709717] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 85.709835] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 85.709954] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 85.710078] (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 85.738737] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 85.738981] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 85.739175] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 85.953272] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 85.953464] usbcore: registered new interface driver btusb [ 86.031858] rtc_cmos 00:07: RTC can wake from S4 [ 86.032049] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 86.032221] rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs [ 86.209905] Non-volatile memory driver v1.2 [ 86.601839] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 86.619398] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 86.805705] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 86.805919] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 86.806087] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 86.928557] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c4] [ 87.055378] thinkpad_acpi: ThinkPad ACPI Extras v0.21 [ 87.055512] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 87.055644] thinkpad_acpi: ThinkPad BIOS 7LETC1WW (2.21 ), EC 7KHT24WW-1.08 [ 87.055783] thinkpad_acpi: Lenovo ThinkPad T61, model 8897CTO [ 87.057905] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 87.058048] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 87.058193] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 87.058402] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 87.058614] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 87.062594] thinkpad_acpi: ACPI backlight control delay disabled [ 87.063162] thinkpad_acpi: radio switch found; radios are enabled [ 87.063387] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 87.063580] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 87.070660] Registered led device: tpacpi::thinklight [ 87.070818] Registered led device: tpacpi::power [ 87.070943] Registered led device: tpacpi:orange:batt [ 87.071074] Registered led device: tpacpi:green:batt [ 87.071201] Registered led device: tpacpi::dock_active [ 87.071331] Registered led device: tpacpi::bay_active [ 87.071461] Registered led device: tpacpi::dock_batt [ 87.071587] Registered led device: tpacpi::unknown_led [ 87.071710] Registered led device: tpacpi::standby [ 87.074089] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode [ 87.074289] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 87.074771] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 87.221126] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 87.256278] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 87.256468] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 87.256693] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 87.256837] iwlagn 0000:03:00.0: setting latency timer to 64 [ 87.256940] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 87.304545] iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels [ 87.305020] iwlagn 0000:03:00.0: PCI INT A disabled [ 87.305402] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 109.074142] EXT3 FS on dm-1, internal journal [ 114.243734] kjournald starting. Commit interval 5 seconds [ 114.255399] EXT3 FS on sda1, internal journal [ 114.255564] EXT3-fs: mounted filesystem with ordered data mode. [ 114.509454] kjournald starting. Commit interval 30 seconds [ 114.509908] EXT3 FS on dm-3, internal journal [ 114.510075] EXT3-fs: mounted filesystem with ordered data mode. [ 114.557568] Adding 1048568k swap on /dev/mapper/hidalgo-swap_1. Priority:-1 extents:1 across:1048568k [ 116.419216] fuse init (API version 7.10) [ 120.148728] ip_tables: (C) 2000-2006 Netfilter Core Team [ 121.012852] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 121.013114] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 121.013326] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 121.013537] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 121.303682] NET: Registered protocol family 10 [ 121.304244] lo: Disabled Privacy Extensions [ 121.348428] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 258.562876] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 259.290084] [drm] Initialized drm 1.1.0 20060810 [ 259.351555] pci 0000:00:02.0: power state changed by ACPI to D0 [ 259.351576] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 259.351585] pci 0000:00:02.0: setting latency timer to 64 [ 259.351878] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 267.952045] Bluetooth: L2CAP ver 2.11 [ 267.952051] Bluetooth: L2CAP socket layer initialized [ 268.353349] Bluetooth: RFCOMM socket layer initialized [ 268.353371] Bluetooth: RFCOMM TTY layer initialized [ 268.353375] Bluetooth: RFCOMM ver 1.10 [ 274.814146] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 274.814322] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) [ 274.814565] iwlagn 0000:03:00.0: irq 40 for MSI/MSI-X [ 274.814705] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 275.108154] Registered led device: iwl-phy0:radio [ 275.108194] Registered led device: iwl-phy0:assoc [ 275.108229] Registered led device: iwl-phy0:RX [ 275.108263] Registered led device: iwl-phy0:TX [ 275.209245] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 277.600744] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 277.660165] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 277.661818] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 279.887796] iwlagn 0000:03:00.0: PCI INT A disabled [ 280.344932] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 280.345116] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [ 280.345346] iwlagn 0000:03:00.0: irq 40 for MSI/MSI-X [ 280.898431] Registered led device: iwl-phy0:radio [ 280.898473] Registered led device: iwl-phy0:assoc [ 280.898507] Registered led device: iwl-phy0:RX [ 280.898540] Registered led device: iwl-phy0:TX [ 280.988060] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 281.753920] wlan0: authenticate with AP da:b9:21:33:53:f4 [ 281.753949] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate [ 281.761068] wlan0: authenticated [ 281.761075] wlan0: associate with AP da:b9:21:33:53:f4 [ 281.761080] wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association [ 283.132395] wlan0: authenticate with AP da:b9:21:33:53:f4 [ 283.138638] wlan0: authenticate with AP da:b9:21:33:53:f4 [ 283.145003] wlan0: authenticate with AP da:b9:21:33:53:f4 [ 283.145021] wlan0: authenticated [ 283.145027] wlan0: associate with AP da:b9:21:33:53:f4 [ 283.149675] wlan0: RX AssocResp from da:b9:21:33:53:f4 (capab=0x411 status=0 aid=2) [ 283.149681] wlan0: associated [ 283.172812] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready