[ 0.000000] BIOS EBDA/lowmem at: 0009b400/0009b400 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.28-rc3-00123-g72a0780 (root@closure) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #97 SMP Wed Nov 5 22:59:25 EST 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable) [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable) [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 3792a000 - 37fef6ae [ 0.000000] Allocated new RAMDISK: 00cb3000 - 013786ae [ 0.000000] Move RAMDISK from 000000003792a000 - 0000000037fef6ad to 00cb3000 - 013786ad [ 0.000000] ACPI: RSDP 000F6860, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT CFF72D76, 003C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF77E20, 0074 (r1 INTEL LINDHRST 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF731CC, 4C54 (r1 Intel LINDHRST 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS CFF78FC0, 0040 [ 0.000000] ACPI: APIC CFF77E94, 00B4 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF77F48, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF77F70, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: MCFG CFF77FC0, 0040 (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: SSDT CFF72DB2, 041A (r1 PmRef CpuPm 3000 INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3974MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 0000a000 - 00010f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000ca725c] TEXT DATA BSS ==> [0000100000 - 0000ca725c] [ 0.000000] #4 [0000ca8000 - 0000cb3000] INIT_PG_TABLE ==> [0000ca8000 - 0000cb3000] [ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000] [ 0.000000] #6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000] [ 0.000000] #7 [0000cb3000 - 00013786ae] NEW RAMDISK ==> [0000cb3000 - 00013786ae] [ 0.000000] #8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000] [ 0.000000] found SMP MP-table at [c00f6800] 000f6800 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000cff70 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048331 [ 0.000000] free_area_init_node: node 0, pgdat c06a7e80, node_mem_map c1379000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3939 pages, LIFO batch:0 [ 0.000000] Normal zone: 3059 pages used for memmap [ 0.000000] Normal zone: 220683 pages, LIFO batch:31 [ 0.000000] HighMem zone: 13910 pages used for memmap [ 0.000000] HighMem zone: 806684 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec84000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 5, version 32, address 0xfec84000, GSI 72-95 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec84400] gsi_base[96]) [ 0.000000] IOAPIC[4]: apic_id 8, version 32, address 0xfec84400, GSI 96-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 5 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/io_apic.c:3614 probe_nr_irqs+0x44/0x4d() [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.28-rc3-00123-g72a0780 #97 [ 0.000000] Call Trace: [ 0.000000] [<c01418f1>] warn_on_slowpath+0x46/0x60 [ 0.000000] [<c0160a3e>] ? __lock_acquire+0x3d9/0xa5b [ 0.000000] [<c06dd463>] ? alloc_bootmem_core+0x1bf/0x221 [ 0.000000] [<c012db8b>] ? native_pmd_val+0x8/0xa [ 0.000000] [<c01324a2>] ? pmd_val+0x11/0x21 [ 0.000000] [<c011bb31>] ? sched_clock+0xc/0x1c [ 0.000000] [<c015e5fb>] ? lock_release_holdtime+0x43/0x48 [ 0.000000] [<c016142c>] ? lock_release+0x14c/0x155 [ 0.000000] [<c015e46b>] ? trace_hardirqs_off_caller+0x79/0x84 [ 0.000000] [<c04ab040>] ? _spin_unlock_irqrestore+0x3e/0x55 [ 0.000000] [<c015e5b6>] ? trace_hardirqs_off+0xb/0xd [ 0.000000] [<c04ab040>] ? _spin_unlock_irqrestore+0x3e/0x55 [ 0.000000] [<c06d5853>] probe_nr_irqs+0x44/0x4d [ 0.000000] [<c06cbfe8>] setup_arch+0xa90/0xb00 [ 0.000000] [<c015e46b>] ? trace_hardirqs_off_caller+0x79/0x84 [ 0.000000] [<c015e5b6>] ? trace_hardirqs_off+0xb/0xd [ 0.000000] [<c015e91a>] ? lockdep_init_map+0x6b/0xc7 [ 0.000000] [<c06c65e2>] start_kernel+0x85/0x30e [ 0.000000] [<c06c6080>] __init_begin+0x80/0x88 [ 0.000000] ---[ end trace 8305b6ae03c24dde ]--- [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 1216512 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031306 [ 0.000000] Kernel command line: root=UUID=051dd1fd-28e9-4b92-b970-03406cf78bf3 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=c084f000 soft=c0847000 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.467 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 2463 kB [ 0.003333] per task-struct memory footprint: 1920 bytes [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.003333] Memory: 4099644k/4980736k available (3770k kernel code, 92804k reserved, 2121k data, 1528k init, 3282376k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) [ 0.003333] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.003333] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.003333] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.003333] .init : 0xc06c6000 - 0xc0844000 (1528 kB) [ 0.003333] .data : 0xc04aeb44 - 0xc06c10c4 (2121 kB) [ 0.003333] .text : 0xc0100000 - 0xc04aeb44 (3770 kB) [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.003333] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.003350] Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.30 BogoMIPS (lpj=9974890) [ 0.003383] Security Framework initialized [ 0.003398] SELinux: Disabled at boot. [ 0.003418] Mount-cache hash table entries: 512 [ 0.003736] Initializing cgroup subsys debug [ 0.003742] Initializing cgroup subsys ns [ 0.003747] Initializing cgroup subsys cpuacct [ 0.003753] Initializing cgroup subsys devices [ 0.003756] Initializing cgroup subsys freezer [ 0.003780] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.003785] CPU: L2 cache: 2048K [ 0.003789] CPU: Physical Processor ID: 0 [ 0.003792] CPU: Processor Core ID: 0 [ 0.003796] Intel machine check architecture supported. [ 0.003804] Intel machine check reporting enabled on CPU#0. [ 0.003808] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available [ 0.003812] using mwait in idle threads. [ 0.003833] Checking 'hlt' instruction... OK. [ 0.018444] ACPI: Core revision 20080926 [ 0.030008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030016] ftrace: allocating 23328 entries in 91 pages [ 0.034024] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067858] CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 [ 0.069998] lockdep: fixing up alternatives. [ 0.069998] CPU 1 irqstacks, hard=c0850000 soft=c0848000 [ 0.069998] Booting processor 1 APIC 0x6 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6055.16 BogoMIPS (lpj=10088261) [ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.003333] CPU: L2 cache: 2048K [ 0.003333] CPU: Physical Processor ID: 3 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] Intel machine check architecture supported. [ 0.003333] Intel machine check reporting enabled on CPU#1. [ 0.003333] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.161229] CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 [ 0.161244] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.163495] lockdep: fixing up alternatives. [ 0.163518] CPU 2 irqstacks, hard=c0851000 soft=c0849000 [ 0.163522] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 5987.97 BogoMIPS (lpj=9974362) [ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.003333] CPU: L2 cache: 2048K [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] Intel machine check architecture supported. [ 0.003333] Intel machine check reporting enabled on CPU#2. [ 0.003333] CPU2: Intel P4/Xeon Extended MCE MSRs (24) available [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.257984] CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 [ 0.258012] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.260184] lockdep: fixing up alternatives. [ 0.260212] CPU 3 irqstacks, hard=c0852000 soft=c084a000 [ 0.260216] Booting processor 3 APIC 0x7 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 5987.20 BogoMIPS (lpj=9974721) [ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.003333] CPU: L2 cache: 2048K [ 0.003333] CPU: Physical Processor ID: 3 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] Intel machine check architecture supported. [ 0.003333] Intel machine check reporting enabled on CPU#3. [ 0.003333] CPU3: Intel P4/Xeon Extended MCE MSRs (24) available [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.354577] CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 [ 0.354603] checking TSC synchronization [CPU#0 -> CPU#3]: [ 0.356665] Measured 210 cycles TSC warp between CPUs, turning off TSC clock. [ 0.356665] Marking TSC unstable due to check_tsc_sync_source failed [ 0.356682] Brought up 4 CPUs [ 0.356688] Total of 4 processors activated (24016.64 BogoMIPS). [ 0.356769] CPU0 attaching sched-domain: [ 0.356774] domain 0: span 0,2 level SIBLING [ 0.356778] groups: 0 2 [ 0.356785] domain 1: span 0-3 level CPU [ 0.356788] groups: 0,2 1,3 [ 0.356798] CPU1 attaching sched-domain: [ 0.356801] domain 0: span 1,3 level SIBLING [ 0.356805] groups: 1 3 [ 0.356810] domain 1: span 0-3 level CPU [ 0.356814] groups: 1,3 0,2 [ 0.356823] CPU2 attaching sched-domain: [ 0.356826] domain 0: span 0,2 level SIBLING [ 0.356829] groups: 2 0 [ 0.356834] domain 1: span 0-3 level CPU [ 0.356838] groups: 0,2 1,3 [ 0.356846] CPU3 attaching sched-domain: [ 0.356849] domain 0: span 1,3 level SIBLING [ 0.356852] groups: 3 1 [ 0.356858] domain 1: span 0-3 level CPU [ 0.356861] groups: 1,3 0,2 [ 0.357057] khelper used greatest stack depth: 3012 bytes left [ 0.357057] net_namespace: 832 bytes [ 0.357057] Booting paravirtualized kernel on bare hardware [ 0.357131] NET: Registered protocol family 16 [ 0.360075] ACPI: bus type pci registered [ 0.360092] PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. [ 0.360092] PCI: Using MMCONFIG for extended config space [ 0.360092] PCI: Using configuration type 1 for base access [ 0.374278] ACPI: EC: Look up EC in DSDT [ 0.379349] ACPI: Interpreter enabled [ 0.379356] ACPI: (supports S0 S1 S4 S5) [ 0.379388] ACPI: Using IOAPIC for interrupt routing [ 0.390136] ACPI: No dock devices found. [ 0.390164] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.390227] pci 0000:00:01.0: reg 10 32bit mmio: [0xdd000000-0xdd000fff] [ 0.390323] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.390329] pci 0000:00:02.0: PME# disabled [ 0.390401] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.390407] pci 0000:00:04.0: PME# disabled [ 0.390478] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.390484] pci 0000:00:06.0: PME# disabled [ 0.390582] pci 0000:00:1d.0: reg 20 io port: [0x1400-0x141f] [ 0.390654] pci 0000:00:1d.1: reg 20 io port: [0x1420-0x143f] [ 0.390726] pci 0000:00:1d.2: reg 20 io port: [0x1440-0x145f] [ 0.390797] pci 0000:00:1d.3: reg 20 io port: [0x1460-0x147f] [ 0.390877] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdd001000-0xdd0013ff] [ 0.390937] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.390945] pci 0000:00:1d.7: PME# disabled [ 0.391063] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.391072] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.391077] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.391109] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.391124] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.391139] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.391152] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.391163] pci 0000:00:1f.1: reg 20 io port: [0x14a0-0x14af] [ 0.391173] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.391243] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] [ 0.391325] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.391359] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.391365] pci 0000:01:00.0: PME# disabled [ 0.391409] pci 0000:01:00.1: reg 10 32bit mmio: [0xdd100000-0xdd100fff] [ 0.391505] pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.391539] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.391544] pci 0000:01:00.2: PME# disabled [ 0.391590] pci 0000:01:00.3: reg 10 32bit mmio: [0xdd101000-0xdd101fff] [ 0.391706] pci 0000:00:02.0: bridge io port: [0x2000-0x3fff] [ 0.391712] pci 0000:00:02.0: bridge 32bit mmio: [0xdd100000-0xdd3fffff] [ 0.391786] pci 0000:02:03.0: reg 10 io port: [0x2000-0x20ff] [ 0.391802] pci 0000:02:03.0: reg 14 64bit mmio: [0xdd220000-0xdd23ffff] [ 0.391818] pci 0000:02:03.0: reg 1c 64bit mmio: [0xdd200000-0xdd21ffff] [ 0.391834] pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x0fffff] [ 0.391848] pci 0000:02:03.0: supports D1 D2 [ 0.391916] pci 0000:02:03.1: reg 10 io port: [0x2400-0x24ff] [ 0.391932] pci 0000:02:03.1: reg 14 64bit mmio: [0xdd260000-0xdd27ffff] [ 0.391948] pci 0000:02:03.1: reg 1c 64bit mmio: [0xdd240000-0xdd25ffff] [ 0.391963] pci 0000:02:03.1: reg 30 32bit mmio: [0x000000-0x0fffff] [ 0.391977] pci 0000:02:03.1: supports D1 D2 [ 0.392048] pci 0000:01:00.0: bridge io port: [0x2000-0x2fff] [ 0.392054] pci 0000:01:00.0: bridge 32bit mmio: [0xdd200000-0xdd2fffff] [ 0.392128] pci 0000:03:02.0: reg 10 64bit mmio: [0xdd300000-0xdd31ffff] [ 0.392149] pci 0000:03:02.0: reg 20 io port: [0x3000-0x303f] [ 0.392175] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold [ 0.392181] pci 0000:03:02.0: PME# disabled [ 0.392250] pci 0000:03:02.1: reg 10 64bit mmio: [0xdd320000-0xdd33ffff] [ 0.392272] pci 0000:03:02.1: reg 20 io port: [0x3040-0x307f] [ 0.392297] pci 0000:03:02.1: PME# supported from D0 D3hot D3cold [ 0.392303] pci 0000:03:02.1: PME# disabled [ 0.392373] pci 0000:01:00.2: bridge io port: [0x3000-0x3fff] [ 0.392379] pci 0000:01:00.2: bridge 32bit mmio: [0xdd300000-0xdd3fffff] [ 0.392518] pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.392551] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.392557] pci 0000:05:00.0: PME# disabled [ 0.392601] pci 0000:05:00.1: reg 10 32bit mmio: [0xdd400000-0xdd400fff] [ 0.392697] pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.392730] pci 0000:05:00.2: PME# supported from D0 D3hot D3cold [ 0.392735] pci 0000:05:00.2: PME# disabled [ 0.392776] pci 0000:05:00.3: reg 10 32bit mmio: [0xdd401000-0xdd401fff] [ 0.392893] pci 0000:00:06.0: bridge 32bit mmio: [0xdd400000-0xdd5fffff] [ 0.392903] pci 0000:00:06.0: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff] [ 0.393039] pci 0000:07:01.0: supports D1 [ 0.393381] pci 0000:05:00.2: bridge 32bit mmio: [0xdd500000-0xdd5fffff] [ 0.393391] pci 0000:05:00.2: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff] [ 0.393496] pci 0000:08:0e.0: reg 10 32bit mmio: [0xdd500000-0xdd500fff] [ 0.393515] pci 0000:08:0e.0: reg 18 32bit mmio: [0xdf400000-0xdf7fffff] [ 0.393551] pci 0000:08:0e.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.393567] pci 0000:08:0e.0: supports D1 [ 0.393626] pci 0000:07:01.0: bridge 32bit mmio: [0xdd500000-0xdd5fffff] [ 0.393636] pci 0000:07:01.0: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff] [ 0.393708] pci 0000:09:01.0: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.393718] pci 0000:09:01.0: reg 14 io port: [0x4000-0x40ff] [ 0.393728] pci 0000:09:01.0: reg 18 32bit mmio: [0xdd600000-0xdd600fff] [ 0.393758] pci 0000:09:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.393772] pci 0000:09:01.0: supports D1 D2 [ 0.393830] pci 0000:00:1e.0: transparent bridge [ 0.393836] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] [ 0.393843] pci 0000:00:1e.0: bridge 32bit mmio: [0xdd600000-0xdeffffff] [ 0.393875] bus 00 -> node 0 [ 0.393885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.394544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.394734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT] [ 0.395051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT] [ 0.395278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT] [ 0.395458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT] [ 0.395639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH0._PRT] [ 0.395819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH1._PRT] [ 0.396018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.403467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.406756] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.406907] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) [ 0.407056] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.407206] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.407357] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 0.407507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.407658] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) [ 0.407756] ACPI: WMI: Mapper loaded [ 0.407756] SCSI subsystem initialized [ 0.407756] libata version 3.00 loaded. [ 0.407756] PCI: Using ACPI for IRQ routing [ 0.413347] NET: Registered protocol family 8 [ 0.413352] NET: Registered protocol family 20 [ 0.423402] cfg80211: Using static regulatory domain info [ 0.423402] cfg80211: Regulatory domain: US [ 0.423402] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.423402] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.423402] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.423402] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.423402] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.423402] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.423402] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.423402] cfg80211: Calling CRDA for country: US [ 0.423455] hpet clockevent registered [ 0.423465] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.423471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.423479] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.433345] Switched to high resolution mode on CPU 0 [ 0.434358] Switched to high resolution mode on CPU 1 [ 0.434382] Switched to high resolution mode on CPU 3 [ 0.434718] Switched to high resolution mode on CPU 2 [ 0.436697] pnp: PnP ACPI init [ 0.436717] ACPI: bus type pnp registered [ 0.443231] pnp: PnP ACPI: found 12 devices [ 0.443236] ACPI: ACPI bus type pnp unregistered [ 0.443241] PnPBIOS: Disabled by ACPI PNP [ 0.443273] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.443278] system 00:01: ioport range 0x800-0x8df has been reserved [ 0.443283] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.443287] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 0.443291] system 00:01: ioport range 0xca2-0xca3 has been reserved [ 0.443295] system 00:01: ioport range 0xca8-0xcaf has been reserved [ 0.443299] system 00:01: ioport range 0x900-0x90f has been reserved [ 0.443303] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.443308] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.480179] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.480186] pci 0000:01:00.0: IO window: 0x2000-0x2fff [ 0.480194] pci 0000:01:00.0: MEM window: 0xdd200000-0xdd2fffff [ 0.480200] pci 0000:01:00.0: PREFETCH window: 0x000000d1000000-0x000000d11fffff [ 0.480210] pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 [ 0.480215] pci 0000:01:00.2: IO window: 0x3000-0x3fff [ 0.480222] pci 0000:01:00.2: MEM window: 0xdd300000-0xdd3fffff [ 0.480228] pci 0000:01:00.2: PREFETCH window: disabled [ 0.480236] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.480241] pci 0000:00:02.0: IO window: 0x2000-0x3fff [ 0.480248] pci 0000:00:02.0: MEM window: 0xdd100000-0xdd3fffff [ 0.480255] pci 0000:00:02.0: PREFETCH window: 0x000000d1000000-0x000000d11fffff [ 0.480264] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 [ 0.480267] pci 0000:00:04.0: IO window: disabled [ 0.480274] pci 0000:00:04.0: MEM window: disabled [ 0.480280] pci 0000:00:04.0: PREFETCH window: disabled [ 0.480292] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 [ 0.480295] pci 0000:05:00.0: IO window: disabled [ 0.480301] pci 0000:05:00.0: MEM window: disabled [ 0.480307] pci 0000:05:00.0: PREFETCH window: disabled [ 0.480318] pci 0000:07:01.0: PCI bridge, secondary bus 0000:08 [ 0.480321] pci 0000:07:01.0: IO window: disabled [ 0.480329] pci 0000:07:01.0: MEM window: 0xdd500000-0xdd5fffff [ 0.480335] pci 0000:07:01.0: PREFETCH window: 0x000000df400000-0x000000df7fffff [ 0.480344] pci 0000:05:00.2: PCI bridge, secondary bus 0000:07 [ 0.480347] pci 0000:05:00.2: IO window: disabled [ 0.480354] pci 0000:05:00.2: MEM window: 0xdd500000-0xdd5fffff [ 0.480360] pci 0000:05:00.2: PREFETCH window: 0x000000df400000-0x000000df7fffff [ 0.480369] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05 [ 0.480372] pci 0000:00:06.0: IO window: disabled [ 0.480379] pci 0000:00:06.0: MEM window: 0xdd400000-0xdd5fffff [ 0.480385] pci 0000:00:06.0: PREFETCH window: 0x000000df400000-0x000000df7fffff [ 0.480395] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.480401] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.480409] pci 0000:00:1e.0: MEM window: 0xdd600000-0xdeffffff [ 0.480415] pci 0000:00:1e.0: PREFETCH window: 0x000000d1200000-0x000000d12fffff [ 0.480440] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.480447] pci 0000:00:02.0: setting latency timer to 64 [ 0.480461] pci 0000:01:00.0: setting latency timer to 64 [ 0.480475] pci 0000:01:00.2: setting latency timer to 64 [ 0.480487] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.480493] pci 0000:00:04.0: setting latency timer to 64 [ 0.480504] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.480510] pci 0000:00:06.0: setting latency timer to 64 [ 0.480522] pci 0000:05:00.0: setting latency timer to 64 [ 0.480535] pci 0000:05:00.2: setting latency timer to 64 [ 0.480553] pci 0000:00:1e.0: setting latency timer to 64 [ 0.480559] bus: 00 index 0 io port: [0x00-0xffff] [ 0.480563] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.480567] bus: 01 index 0 io port: [0x2000-0x3fff] [ 0.480570] bus: 01 index 1 mmio: [0xdd100000-0xdd3fffff] [ 0.480573] bus: 01 index 2 mmio: [0xd1000000-0xd11fffff] [ 0.480576] bus: 01 index 3 mmio: [0x0-0x0] [ 0.480579] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.480582] bus: 02 index 1 mmio: [0xdd200000-0xdd2fffff] [ 0.480585] bus: 02 index 2 mmio: [0xd1000000-0xd11fffff] [ 0.480588] bus: 02 index 3 mmio: [0x0-0x0] [ 0.480591] bus: 03 index 0 io port: [0x3000-0x3fff] [ 0.480594] bus: 03 index 1 mmio: [0xdd300000-0xdd3fffff] [ 0.480597] bus: 03 index 2 mmio: [0x0-0x0] [ 0.480600] bus: 03 index 3 mmio: [0x0-0x0] [ 0.480603] bus: 04 index 0 mmio: [0x0-0x0] [ 0.480606] bus: 04 index 1 mmio: [0x0-0x0] [ 0.480608] bus: 04 index 2 mmio: [0x0-0x0] [ 0.480611] bus: 04 index 3 mmio: [0x0-0x0] [ 0.480614] bus: 05 index 0 mmio: [0x0-0x0] [ 0.480617] bus: 05 index 1 mmio: [0xdd400000-0xdd5fffff] [ 0.480620] bus: 05 index 2 mmio: [0xdf400000-0xdf7fffff] [ 0.480623] bus: 05 index 3 mmio: [0x0-0x0] [ 0.480625] bus: 06 index 0 mmio: [0x0-0x0] [ 0.480628] bus: 06 index 1 mmio: [0x0-0x0] [ 0.480631] bus: 06 index 2 mmio: [0x0-0x0] [ 0.480634] bus: 06 index 3 mmio: [0x0-0x0] [ 0.480636] bus: 07 index 0 mmio: [0x0-0x0] [ 0.480639] bus: 07 index 1 mmio: [0xdd500000-0xdd5fffff] [ 0.480642] bus: 07 index 2 mmio: [0xdf400000-0xdf7fffff] [ 0.480645] bus: 07 index 3 mmio: [0x0-0x0] [ 0.480648] bus: 08 index 0 mmio: [0x0-0x0] [ 0.480651] bus: 08 index 1 mmio: [0xdd500000-0xdd5fffff] [ 0.480654] bus: 08 index 2 mmio: [0xdf400000-0xdf7fffff] [ 0.480657] bus: 08 index 3 mmio: [0x0-0x0] [ 0.480660] bus: 09 index 0 io port: [0x4000-0x4fff] [ 0.480663] bus: 09 index 1 mmio: [0xdd600000-0xdeffffff] [ 0.480666] bus: 09 index 2 mmio: [0xd1200000-0xd12fffff] [ 0.480669] bus: 09 index 3 io port: [0x00-0xffff] [ 0.480673] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.480688] NET: Registered protocol family 2 [ 0.490966] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.491518] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.492341] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 0.493761] TCP: Hash tables configured (established 131072 bind 65536) [ 0.493767] TCP reno registered [ 0.497711] NET: Registered protocol family 1 [ 0.497923] checking if image is initramfs... it is [ 1.114907] Freeing initrd memory: 6933k freed [ 1.115222] Simple Boot Flag at 0x39 set to 0x1 [ 1.118203] alg: cipher: Test 1 failed on encryption for aes-asm [ 1.118271] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 [ 1.118286] cryptomgr_test used greatest stack depth: 2824 bytes left [ 1.119046] audit: initializing netlink socket (disabled) [ 1.119080] type=2000 audit(1225947629.116:1): initialized [ 1.129720] highmem bounce pool size: 64 pages [ 1.129730] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.137038] VFS: Disk quotas dquot_6.5.1 [ 1.137286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.139529] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.140308] fuse init (API version 7.10) [ 1.140726] msgmni has been set to 1611 [ 1.141169] alg: No test for cipher_null (cipher_null-generic) [ 1.141389] alg: No test for digest_null (digest_null-generic) [ 1.141487] alg: No test for compress_null (compress_null-generic) [ 1.141739] cryptomgr_test used greatest stack depth: 1912 bytes left [ 1.143550] alg: No test for stdrng (krng) [ 1.143892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.143900] io scheduler noop registered [ 1.143930] io scheduler cfq registered (default) [ 1.144873] pci 0000:09:01.0: Boot video device [ 1.147502] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.147553] pci_express 0000:00:02.0:pcie00: allocate port service [ 1.147680] pci_express 0000:00:02.0:pcie01: allocate port service [ 1.147905] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.147952] pci_express 0000:00:04.0:pcie00: allocate port service [ 1.148067] pci_express 0000:00:04.0:pcie01: allocate port service [ 1.148284] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.148327] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.148439] pci_express 0000:00:06.0:pcie01: allocate port service [ 1.150041] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support [ 1.151187] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support [ 1.152323] aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support [ 1.152928] input: Power Button (FF) as /class/input/input0 [ 1.152937] ACPI: Power Button (FF) [PWRF] [ 1.153154] input: Power Button (CM) as /class/input/input1 [ 1.153163] ACPI: Power Button (CM) [PWRB] [ 1.154226] processor ACPI0007:00: registered as cooling_device0 [ 1.154567] processor ACPI0007:01: registered as cooling_device1 [ 1.154918] processor ACPI0007:02: registered as cooling_device2 [ 1.155259] processor ACPI0007:03: registered as cooling_device3 [ 1.157574] isapnp: Scanning for PnP cards... [ 1.516148] isapnp: No Plug & Play device found [ 1.605958] Non-volatile memory driver v1.2 [ 1.605964] Linux agpgart interface v0.103 [ 1.606075] [drm] Initialized drm 1.1.0 20060810 [ 1.606080] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.606294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.606534] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.607850] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.608488] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.613570] brd: module loaded [ 1.615848] loop: module loaded [ 1.615882] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 1.615886] Copyright (c) 1999-2006 Intel Corporation. [ 1.615947] e1000 0000:03:02.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 1.881797] e1000: 0000:03:02.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:78:2c:7e [ 1.913408] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.913441] e1000 0000:03:02.1: PCI INT B -> GSI 55 (level, low) -> IRQ 55 [ 2.181800] e1000: 0000:03:02.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:78:2c:7f [ 2.213399] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 2.213539] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 2.213543] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.213900] input: Macintosh mouse button emulation as /class/input/input2 [ 2.213959] Uniform Multi-Platform E-IDE driver [ 2.214199] ide-gd driver 1.18 [ 2.214553] arcmsr 0000:08:0e.0: PCI INT A -> GSI 98 (level, low) -> IRQ 64 [ 2.226715] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.41 2006-5-24 [ 2.240022] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 2.240024] Driver Version 1.20.00.15 2008/02/27 [ 2.241308] Driver 'sd' needs updating - please use bus_type methods [ 2.241466] scsi 0:0:0:0: Direct-Access ABERDEEN Boot Vol R001 PQ: 0 ANSI: 3 [ 2.241690] Fusion MPT base driver 3.04.07 [ 2.241696] Copyright (c) 1999-2008 LSI Corporation [ 2.241718] Fusion MPT SPI Host driver 3.04.07 [ 2.241726] scsi 0:0:0:1: Direct-Access ABERDEEN Ted Data #1 R001 PQ: 0 ANSI: 3 [ 2.241791] mptspi 0000:02:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 2.241909] scsi 0:0:0:2: Direct-Access ABERDEEN Ted Data #2 R001 PQ: 0 ANSI: 3 [ 2.241936] mptbase: ioc0: Initiating bringup [ 2.242087] scsi 0:0:0:3: Direct-Access ABERDEEN Ted Data #3 R001 PQ: 0 ANSI: 3 [ 2.243679] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 2.244260] sd 0:0:0:0: [sda] 39061504 512-byte hardware sectors: (19.9 GB/18.6 GiB) [ 2.244330] sd 0:0:0:0: [sda] Write Protect is off [ 2.244335] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 2.244466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.244675] sd 0:0:0:0: [sda] 39061504 512-byte hardware sectors: (19.9 GB/18.6 GiB) [ 2.244743] sd 0:0:0:0: [sda] Write Protect is off [ 2.244749] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 2.244864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.244873] sda: sda1 sda2 < sda5 > [ 2.257385] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.258218] sd 0:0:0:1: [sdb] 1464842240 512-byte hardware sectors: (749 GB/698 GiB) [ 2.258287] sd 0:0:0:1: [sdb] Write Protect is off [ 2.258292] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08 [ 2.258398] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.258569] sd 0:0:0:1: [sdb] 1464842240 512-byte hardware sectors: (749 GB/698 GiB) [ 2.258638] sd 0:0:0:1: [sdb] Write Protect is off [ 2.258643] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08 [ 2.258756] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.258765] sdb: unknown partition table [ 2.259789] sd 0:0:0:1: [sdb] Attached SCSI disk [ 2.260491] sd 0:0:0:2: [sdc] 1464842240 512-byte hardware sectors: (749 GB/698 GiB) [ 2.260563] sd 0:0:0:2: [sdc] Write Protect is off [ 2.260569] sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08 [ 2.260689] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.260861] sd 0:0:0:2: [sdc] 1464842240 512-byte hardware sectors: (749 GB/698 GiB) [ 2.260927] sd 0:0:0:2: [sdc] Write Protect is off [ 2.260932] sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08 [ 2.261053] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.261063] sdc: unknown partition table [ 2.262043] sd 0:0:0:2: [sdc] Attached SCSI disk [ 2.262732] sd 0:0:0:3: [sdd] 937496576 512-byte hardware sectors: (479 GB/447 GiB) [ 2.262794] sd 0:0:0:3: [sdd] Write Protect is off [ 2.262799] sd 0:0:0:3: [sdd] Mode Sense: cb 00 00 08 [ 2.262928] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.263131] sd 0:0:0:3: [sdd] 937496576 512-byte hardware sectors: (479 GB/447 GiB) [ 2.263201] sd 0:0:0:3: [sdd] Write Protect is off [ 2.263207] sd 0:0:0:3: [sdd] Mode Sense: cb 00 00 08 [ 2.263333] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.263341] sdd: sdd1 sdd2 [ 2.264222] sd 0:0:0:3: [sdd] Attached SCSI disk [ 2.646685] ioc0: LSI53C1030 C0: Capabilities={Initiator} [ 3.013449] scsi1 : ioc0: LSI53C1030 C0, FwRev=01030700h, Ports=1, MaxQ=222, IRQ=28 [ 3.620139] mptspi 0000:02:03.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 3.620298] mptbase: ioc1: Initiating bringup [ 4.026684] ioc1: LSI53C1030 C0: Capabilities={Initiator} [ 4.393457] scsi2 : ioc1: LSI53C1030 C0, FwRev=01030700h, Ports=1, MaxQ=222, IRQ=29 [ 5.000578] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 5.003539] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.003553] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.010330] mice: PS/2 mouse device common for all mice [ 5.015044] cpuidle: using governor ladder [ 5.015049] cpuidle: using governor menu [ 5.015243] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 5.020497] ALSA device list: [ 5.020501] No soundcards found. [ 5.021833] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.021858] TCP cubic registered [ 5.022590] RPC: Registered udp transport module. [ 5.022594] RPC: Registered tcp transport module. [ 5.022713] Using IPI No-Shortcut mode [ 5.023565] scsi: waiting for bus probes to complete ... [ 5.047515] input: AT Translated Set 2 keyboard as /class/input/input3 [ 5.680315] input: PS/2 Generic Mouse as /class/input/input4 [ 8.755082] Freeing unused kernel memory: 1528k freed [ 8.755371] Write protecting the kernel read-only data: 1808k [ 9.066797] usplash[1538]: segfault at c1471 ip 00001471 sp 00000ffa error 15 in zero (deleted)[1000+9f000] [ 10.138762] device-mapper: uevent: version 1.0.3 [ 10.139310] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 10.178456] md: linear personality registered for level -1 [ 10.186457] md: multipath personality registered for level -4 [ 10.193863] md: raid0 personality registered for level 0 [ 10.203628] md: raid1 personality registered for level 1 [ 10.210393] xor: automatically using best checksumming function: pIII_sse [ 10.227922] pIII_sse : 5544.000 MB/sec [ 10.227927] xor: using function: pIII_sse (5544.000 MB/sec) [ 10.228935] async_tx: api initialized (sync-only) [ 10.291308] raid6: int32x1 725 MB/s [ 10.347954] raid6: int32x2 727 MB/s [ 10.404658] raid6: int32x4 652 MB/s [ 10.461286] raid6: int32x8 598 MB/s [ 10.517939] raid6: mmxx1 1812 MB/s [ 10.574613] raid6: mmxx2 2058 MB/s [ 10.631257] raid6: sse1x1 1094 MB/s [ 10.687931] raid6: sse1x2 1927 MB/s [ 10.744594] raid6: sse2x1 2183 MB/s [ 10.801273] raid6: sse2x2 3132 MB/s [ 10.801276] raid6: using algorithm sse2x2 (3132 MB/s) [ 10.801282] md: raid6 personality registered for level 6 [ 10.801286] md: raid5 personality registered for level 5 [ 10.801289] md: raid4 personality registered for level 4 [ 10.837081] md: raid10 personality registered for level 10 [ 11.363730] kjournald starting. Commit interval 5 seconds [ 11.363771] EXT3-fs: mounted filesystem with ordered data mode. [ 15.808959] udevd used greatest stack depth: 1800 bytes left [ 16.194963] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 16.587198] NET: Registered protocol family 10 [ 16.589961] lo: Disabled Privacy Extensions [ 16.594335] modprobe used greatest stack depth: 1760 bytes left [ 17.111098] EDAC MC: Ver: 2.1.0 Nov 5 2008 [ 17.271832] EDAC e752x: tolm = d0000, remapbase = 100000, remaplimit = 12c000 [ 17.271932] EDAC MC0: Giving out device to 'e752x_edac' 'E7520': DEV 0000:00:00.0 [ 17.272148] EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 17.337020] usbcore: registered new interface driver usbfs [ 17.337178] usbcore: registered new interface driver hub [ 17.351997] ata_piix 0000:00:1f.1: version 2.12 [ 17.352028] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.352118] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 17.374716] usbcore: registered new device driver usb [ 17.388278] uhci_hcd: USB Universal Host Controller Interface driver [ 17.388386] scsi3 : ata_piix [ 17.396082] scsi4 : ata_piix [ 17.398167] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14a0 irq 14 [ 17.398175] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14a8 irq 15 [ 17.409044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.617915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 17.617922] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 17.678924] input: PC Speaker as /class/input/input5 [ 17.710381] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.23, max UDMA/33 [ 17.723636] ata2.00: configured for UDMA/33 [ 17.734037] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.23 PQ: 0 ANSI: 5 [ 17.734640] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.734659] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 17.734669] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 17.734867] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 17.734922] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400 [ 17.735204] usb usb1: configuration #1 chosen from 1 choice [ 17.735333] hub 1-0:1.0: USB hub found [ 17.735352] hub 1-0:1.0: 2 ports detected [ 17.735889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 17.735896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.735902] usb usb1: Product: UHCI Host Controller [ 17.735907] usb usb1: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd [ 17.735912] usb usb1: SerialNumber: 0000:00:1d.0 [ 17.735990] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 17.736379] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 17.736388] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 17.736512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 17.740448] ehci_hcd 0000:00:1d.7: debug port 1 [ 17.740461] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 17.740492] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdd001000 [ 17.744509] iTCO_vendor_support: vendor-support=0 [ 17.750849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 17.751086] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) [ 17.751245] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.754196] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 17.754498] usb usb2: configuration #1 chosen from 1 choice [ 17.754641] hub 2-0:1.0: USB hub found [ 17.754664] hub 2-0:1.0: 8 ports detected [ 17.755163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 17.755171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.755176] usb usb2: Product: EHCI Host Controller [ 17.755182] usb usb2: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 ehci_hcd [ 17.755187] usb usb2: SerialNumber: 0000:00:1d.7 [ 17.755267] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 17.755283] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 17.755291] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 17.755402] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 17.755454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420 [ 17.755727] usb usb3: configuration #1 chosen from 1 choice [ 17.755860] hub 3-0:1.0: USB hub found [ 17.755879] hub 3-0:1.0: 2 ports detected [ 17.760170] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 17.760178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.760184] usb usb3: Product: UHCI Host Controller [ 17.760189] usb usb3: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd [ 17.760194] usb usb3: SerialNumber: 0000:00:1d.1 [ 17.760256] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 17.760271] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 17.760279] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 17.760394] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 17.760446] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440 [ 17.760729] usb usb4: configuration #1 chosen from 1 choice [ 17.760901] hub 4-0:1.0: USB hub found [ 17.760921] hub 4-0:1.0: 2 ports detected [ 17.761356] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 17.761363] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.761370] usb usb4: Product: UHCI Host Controller [ 17.761375] usb usb4: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd [ 17.761381] usb usb4: SerialNumber: 0000:00:1d.2 [ 17.761444] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.761465] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 17.761474] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 17.761586] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 17.761619] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460 [ 17.761902] usb usb5: configuration #1 chosen from 1 choice [ 17.762032] hub 5-0:1.0: USB hub found [ 17.762050] hub 5-0:1.0: 2 ports detected [ 17.762504] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 17.762511] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.762517] usb usb5: Product: UHCI Host Controller [ 17.762522] usb usb5: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd [ 17.762527] usb usb5: SerialNumber: 0000:00:1d.3 [ 17.762941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.810816] Floppy drive(s): fd0 is 1.44M [ 17.837594] FDC 0 is a National Semiconductor PC87306 [ 17.850961] intel_rng: FWH not detected [ 18.716834] Driver 'sr' needs updating - please use bus_type methods [ 18.724398] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 18.742826] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 18.742835] Uniform CD-ROM driver Revision: 3.20 [ 18.743182] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 18.813068] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.813180] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 18.813293] sd 0:0:0:2: Attached scsi generic sg2 type 0 [ 18.813445] sd 0:0:0:3: Attached scsi generic sg3 type 0 [ 18.813585] scsi 0:0:16:0: Attached scsi generic sg4 type 3 [ 18.813723] sr 4:0:0:0: Attached scsi generic sg5 type 5 [ 19.745910] lp: driver loaded but no devices found [ 19.876784] Adding 827308k swap on /dev/sda5. Priority:-1 extents:1 across:827308k [ 20.187676] EXT3 FS on sda1, internal journal [ 20.826311] kjournald starting. Commit interval 5 seconds [ 20.826638] EXT3 FS on sdc, internal journal [ 20.826653] EXT3-fs: mounted filesystem with ordered data mode. [ 21.012483] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 21.103968] ISO 9660 Extensions: RRIP_1991A [ 23.369385] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 24.657314] ppdev: user-space parallel port driver [ 24.949010] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 24.949015] apm: disabled - APM is not SMP safe. [ 26.790428] eth0: no IPv6 routers present [ 27.807225] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 27.817857] NFSD: starting 90-second grace period [ 30.007422] lsb_release used greatest stack depth: 1752 bytes left [ 32.115122] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 32.685297] NET: Registered protocol family 17 [ 32.891483] mtrr: type mismatch for de000000,800000 old: write-back new: write-combining [ 32.915222] mtrr: type mismatch for de000000,800000 old: write-back new: write-combining