| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <C343CF1D29E44E63AB4E2A5BE7511916@callisto>
Date: Thu, 6 Nov 2008 22:06:51 -0800
From: "Lee Howard" <lee.howard@...npine.com>
To: "'Russell King'" <rmk+lkml@....linux.org.uk>
Cc: "'Peter Alfredsen'" <loki_val@...too.org>,
"'Alan Cox'" <alan@...rguk.ukuu.org.uk>,
<linux-kernel@...r.kernel.org>
Subject: RE: Is the PCI serial driver code GPL v2 or v3
This works for me. Do I need to do anything else to see this committed?
Thank you,
Lee.
Lee Howard
Mainpine, Inc. Software Development Lead
Tel: +1 866 363 6680 ext 805 | Fax: +1 360 462 8160
lee.howard@...npine.com | www.mainpine.com
-----Original Message-----
From: Russell King [mailto:rmk@....linux.org.uk] On Behalf Of Russell King
Sent: Thursday, November 06, 2008 12:15 PM
To: Lee Howard
Cc: 'Peter Alfredsen'; 'Alan Cox'; linux-kernel@...r.kernel.org
Subject: Re: Is the PCI serial driver code GPL v2 or v3
On Thu, Nov 06, 2008 at 11:39:44AM -0800, Lee Howard wrote:
> The "hack" originates from code done by Oxford Semiconductor. I would
> be happy to have it done with the quirk system, and I am willing to
> write a patch to that effect. My guess, however, would be that I'll
> still not do it in your favorite way, and so I'm asking if you would
> like me to write the code change or will you (or someone else here
> familiar with the favorite
> ways) do it?
There's plenty of examples in there, eg, pci_timedia_init, pci_netmos_init,
and pci_ite887x_init all have a variable number of ports. Here's a patch
which converts it:
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index
5450a0e..057b532 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -737,6 +737,38 @@ static void __devexit pci_ite887x_exit(struct pci_dev
*dev)
release_region(ioport, ITE_887x_IOSIZE); }
+/*
+ * Oxford Semiconductor Inc.
+ * Check that device is part of the Tornado range of devices, then
+determine
+ * the number of ports available on the device.
+ */
+static int pci_oxsemi_tornado_init(struct pci_dev *dev) {
+ u8 __iomem *p;
+ unsigned long deviceID;
+ unsigned int number_uarts = 0;
+
+ /* OxSemi Tornado devices are all 0xCxxx */
+ if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+ (dev->device & 0xF000) != 0xC000)
+ return 0;
+
+ p = pci_iomap(dev, 0, 5);
+ if (p == NULL)
+ return -ENOMEM;
+
+ deviceID = ioread32(p);
+ /* Tornado device */
+ if (deviceID == 0x07000200) {
+ number_uarts = ioread8(p + 4);
+ printk(KERN_DEBUG
+ "%d ports detected on Oxford PCI Express device\n",
+
number_uarts);
+ }
+ pci_iounmap(dev, p);
+ return number_uarts;
+}
+
static int
pci_default_setup(struct serial_private *priv, struct pciserial_board
*board,
struct uart_port *port, int idx)
@@ -1018,6 +1050,25 @@ static struct pci_serial_quirk pci_serial_quirks[]
__refdata = {
.setup = pci_default_setup,
},
/*
+ * For Oxford Semiconductor and Mainpine
+ */
+ {
+ .vendor = PCI_VENDOR_ID_OXSEMI,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_MAINPINE,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_default_setup,
+ },
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1854,39 +1905,6 @@ serial_pci_matches(struct pciserial_board *board,
board->first_offset == guessed->first_offset; }
-/*
- * Oxford Semiconductor Inc.
- * Check that device is part of the Tornado range of devices, then
determine
- * the number of ports available on the device.
- */
-static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct
pciserial_board *board) -{
- u8 __iomem *p;
- unsigned long deviceID;
- unsigned int number_uarts;
-
- /* OxSemi Tornado devices are all 0xCxxx */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
- (dev->device & 0xF000) != 0xC000)
- return 0;
-
- p = pci_iomap(dev, 0, 5);
- if (p == NULL)
- return -ENOMEM;
-
- deviceID = ioread32(p);
- /* Tornado device */
- if (deviceID == 0x07000200) {
- number_uarts = ioread8(p + 4);
- board->num_ports = number_uarts;
- printk(KERN_DEBUG
- "%d ports detected on Oxford PCI Express device\n",
-
number_uarts);
- }
- pci_iounmap(dev, p);
- return 0;
-}
-
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) {
@@ -1895,13 +1913,6 @@ pciserial_init_ports(struct pci_dev *dev, struct
pciserial_board *board)
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
- /*
- * Find number of ports on board
- */
- if (dev->vendor == PCI_VENDOR_ID_OXSEMI ||
- dev->vendor == PCI_VENDOR_ID_MAINPINE)
- pci_oxsemi_tornado_init(dev, board);
-
nr_ports = board->num_ports;
/*
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists