| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4922EB4F.8040802@shaw.ca> Date: Tue, 18 Nov 2008 10:20:31 -0600 From: Robert Hancock <hancockr@...w.ca> To: Andrey Vul <andrey.vul@...il.com> CC: linux-kernel <linux-kernel@...r.kernel.org>, ide <linux-ide@...r.kernel.org>, David.Woodhouse@...el.com, suresh.b.siddha@...el.com Subject: Re: jfs problem Andrey Vul wrote: > On Tue, Nov 18, 2008 at 00:47, Robert Hancock <hancockr@...w.ca> wrote: >> Andrey Vul wrote: >>> I have a JFS problem occuring randomly. The hardware that this happens >>> on is an Asus M50VM laptop. >>> >>> /dev/sda5 is mounted on / >>> >>> Kernel version is 2.6.27.4 with dm-bbr (device mapper - bad block >>> relocation), fbcondecor, and squashfs patches. >>> >>> dmesg: >>> [ 130.405776] DMAR:[DMA Write] Request device [00:1f.2] fault addr >>> fff9f000 >>> [ 130.405780] DMAR:[fault reason 05] PTE Write access is not set >>> [ 130.405828] ERROR: (device sda5): diRead: i_ino != di_number >>> [ 130.406133] ERROR: (device sda5): remounting filesystem as read-only >>> [ 130.406136] >>> [ 130.406146] jfs_lookup: iget failed on inum 188808 >>> [ 131.212899] DMAR:[DMA Write] Request device [00:1f.2] fault addr >>> fff9f000 >>> [ 131.212903] DMAR:[fault reason 05] PTE Write access is not set >>> [ 131.212962] ERROR: (device sda5): stack overrun in dtSearch! >>> [ 131.212968] btstack dump: >>> [ 131.212972] bn = 0, index = 0 >>> [ 131.212975] bn = 5402c5, index = 0 >>> [ 131.212979] bn = 0, index = 0 >>> [ 131.212982] bn = 5402c5, index = 0 >>> [ 131.212985] bn = 0, index = 0 >>> [ 131.212988] bn = 5402c5, index = 0 >>> [ 131.212991] bn = 0, index = 0 >>> [ 131.212995] bn = fffffffffffffff4, index = 7336 >>> [ 131.213015] jfs_lookup: dtSearch returned -5 >> This doesn't look like any JFS problem, more like DMAR is blocking a write >> request from a controller to an area that it doesn't think should be >> writable. Can you post dmesg and lspci -vv from bootup? >> Well, it's definitely the AHCI SATA controller that's doing the write.. CCing some people. > 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI > Controller (rev 03) (prog-if 01 [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. Device 1897 > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 374 > I/O ports at b000 [size=8] > I/O ports at ac00 [size=4] > I/O ports at a880 [size=8] > I/O ports at a800 [size=4] > I/O ports at a480 [size=32] > Memory at f9fff000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Count=1/16 Enable+ > Capabilities: [70] Power Management version 3 > Capabilities: [a8] SATA HBA <?> > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ahci > dmesg from bootup: > [ 0.000000] Linux version 2.6.27-gentoo-r2 (root@...rey-laptop) > (gcc version 4.3.2 (Gentoo 4.3.2 p1.1) ) #6 SMP PREEMPT Mon Nov 17 > 12:51:55 EST 2008 > [ 0.000000] Command line: root=/dev/sda5 vga=0x31b ro > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) > [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable) > [ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8e800 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bff8e800 - 00000000bffe0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) > [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x3ffffffff > [ 0.000000] init_memory_mapping > [ 0.000000] 0000000000 - 00bfe00000 page 2M > [ 0.000000] 00bfe00000 - 00bff80000 page 4k > [ 0.000000] kernel direct mapping tables up to bff80000 @ 8000-d000 > [ 0.000000] last_map_addr: bff80000 end: bff80000 > [ 0.000000] init_memory_mapping > [ 0.000000] 0100000000 - 0140000000 page 2M > [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 > [ 0.000000] last_map_addr: 140000000 end: 140000000 > [ 0.000000] DMI 2.5 present. > [ 0.000000] ACPI: RSDP 000F9370, 0024 (r2 ACPIAM) > [ 0.000000] ACPI: XSDT BFF80100, 0084 (r1 _ASUS_ Notebook 20080701 > MSFT 97) > [ 0.000000] ACPI: FACP BFF80290, 00F4 (r3 070108 FACP1731 20080701 > MSFT 97) > [ 0.000000] ACPI: DSDT BFF80680, BD06 (r1 M50V0 M50V0204 204 > INTL 20051117) > [ 0.000000] ACPI: FACS BFF8E800, 0040 > [ 0.000000] ACPI: APIC BFF80390, 005C (r1 070108 APIC1731 20080701 > MSFT 97) > [ 0.000000] ACPI: MCFG BFF80430, 003C (r1 070108 OEMMCFG 20080701 > MSFT 97) > [ 0.000000] ACPI: SLIC BFF80470, 0176 (r1 _ASUS_ Notebook 20080701 > MSFT 97) > [ 0.000000] ACPI: ECDT BFF80620, 0054 (r1 070108 OEMECDT 20080701 > MSFT 97) > [ 0.000000] ACPI: DBGP BFF803F0, 0034 (r1 070108 DBGP1731 20080701 > MSFT 97) > [ 0.000000] ACPI: BOOT BFF805F0, 0028 (r1 070108 BOOT1731 20080701 > MSFT 97) > [ 0.000000] ACPI: OEMB BFF8E840, 0071 (r1 070108 OEMB1731 20080701 > MSFT 97) > [ 0.000000] ACPI: HPET BFF8C390, 0038 (r1 070108 OEMHPET 20080701 > MSFT 97) > [ 0.000000] ACPI: DMAR BFF8E8C0, 0108 (r1 070108 DMAR1731 20080701 > MSFT 97) > [ 0.000000] ACPI: ATKG BFF8EBD0, 8024 (r1 022008 OEMATKG 20080220 > MSFT 97) > [ 0.000000] ACPI: SSDT BFF97720, 04F0 (r1 PmRef CpuPm 3000 > INTL 20051117) > [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0140000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 - 0000008000] > [ 0.000000] #2 [0001000000 - 00017a68bc] TEXT DATA BSS ==> > [0001000000 - 00017a68bc] > [ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> > [000009ec00 - 0000100000] > [ 0.000000] #4 [0000008000 - 000000b000] PGTABLE ==> > [0000008000 - 000000b000] > [ 0.000000] #5 [000000b000 - 000000c000] PGTABLE ==> > [000000b000 - 000000c000] > [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 > [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> > [ffff880028200000-ffff88002c7fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00140000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x0000009e > [ 0.000000] 0: 0x00000100 -> 0x000bff80 > [ 0.000000] 0: 0x00100000 -> 0x00140000 > [ 0.000000] On node 0 totalpages: 1048350 > [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 767928 pages, LIFO batch:31 > [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000 > [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000bff80000 - 00000000bff8e000 > [ 0.000000] PM: Registered nosave memory: 00000000bff8e000 - 00000000bff8f000 > [ 0.000000] PM: Registered nosave memory: 00000000bff8f000 - 00000000bffe0000 > [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 > [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 > [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at c4000000 (gap: > c0000000:3ee00000) > [ 0.000000] PERCPU: Allocating 46496 bytes of per cpu data > [ 0.000000] NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 1030324 > [ 0.000000] Kernel command line: root=/dev/sda5 vga=0x31b ro > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. > [ 0.000000] TSC: using PMTIMER calibration value > [ 0.000000] Detected 2527.260 MHz processor. > [ 0.000999] Console: colour dummy device 80x25 > [ 0.000999] console [tty0] enabled > [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, > 4194304 bytes) > [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [ 0.000999] Checking aperture... > [ 0.000999] No AGP bridge found > [ 0.000999] Memory: 4106568k/5242880k available (4434k kernel code, > 85988k reserved, 2271k data, 360k init) > [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.000999] hpet clockevent registered > [ 0.000999] Calibrating delay loop (skipped), value calculated > using timer frequency.. 5054.52 BogoMIPS (lpj=2527260) > [ 0.000999] Security Framework initialized > [ 0.000999] Mount-cache hash table entries: 256 > [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.000999] CPU: L2 cache: 6144K > [ 0.000999] CPU: Physical Processor ID: 0 > [ 0.000999] CPU: Processor Core ID: 0 > [ 0.000999] using mwait in idle threads. > [ 0.000999] ACPI: Core revision 20080609 > [ 0.016394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.027130] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 > [ 0.027137] Using local APIC timer interrupts. > [ 0.027997] APIC timer calibration result 16626689 > [ 0.027998] Detected 16.626 MHz APIC timer. > [ 0.028096] Booting processor 1/1 ip 6000 > [ 0.000999] Initializing CPU#1 > [ 0.000999] Calibrating delay using timer specific routine.. > 7076.06 BogoMIPS (lpj=3538034) > [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.000999] CPU: L2 cache: 6144K > [ 0.000999] CPU: Physical Processor ID: 0 > [ 0.000999] CPU: Processor Core ID: 1 > [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > [ 0.100581] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 > [ 0.100622] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.100998] Brought up 2 CPUs > [ 0.101002] Total of 2 processors activated (12130.58 BogoMIPS). > [ 0.101072] khelper used greatest stack depth: 6016 bytes left > [ 0.101072] net_namespace: 1504 bytes > [ 0.102037] Time: 1:38:58 Date: 11/18/08 > [ 0.102060] NET: Registered protocol family 16 > [ 0.102078] No dock devices found. > [ 0.102091] ACPI FADT declares the system doesn't support PCIe > ASPM, so disable it > [ 0.102097] ACPI: bus type pci registered > [ 0.102108] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 0.102108] PCI: Not using MMCONFIG. > [ 0.102108] PCI: Using configuration type 1 for base access > [ 0.105602] ACPI: EC: EC description table is found, configuring boot EC > [ 0.110214] ACPI: BIOS _OSI(Linux) query ignored > [ 0.110219] ACPI: DMI System Vendor: ASUSTeK Computer Inc. > [ 0.110224] ACPI: DMI Product Name: M50Vm > [ 0.110227] ACPI: DMI Product Version: 1.0 > [ 0.110231] ACPI: DMI Board Name: M50Vm > [ 0.110234] ACPI: DMI BIOS Vendor: American Megatrends Inc. > [ 0.110238] ACPI: DMI BIOS Date: 07/01/2008 > [ 0.110242] ACPI: Please send DMI info above to linux-acpi@...r.kernel.org > [ 0.110246] ACPI: If "acpi_osi=Linux" works better, please notify > linux-acpi@...r.kernel.org > [ 0.115167] ACPI: Interpreter enabled > [ 0.115172] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.115194] ACPI: Using IOAPIC for interrupt routing > [ 0.115305] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 0.119137] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > [ 0.123452] PCI: Using MMCONFIG at e0000000 - efffffff > [ 0.134137] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 > [ 0.134143] ACPI: EC: driver started in poll mode > [ 0.134177] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.135050] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.135057] pci 0000:00:01.0: PME# disabled > [ 0.135150] PCI: 0000:00:1a.0 reg 20 io port: [bc00, bc1f] > [ 0.135235] PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f] > [ 0.135320] PCI: 0000:00:1a.2 reg 20 io port: [b800, b81f] > [ 0.135404] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff] > [ 0.135463] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.135470] pci 0000:00:1a.7: PME# disabled > [ 0.135517] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff] > [ 0.135569] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.135576] pci 0000:00:1b.0: PME# disabled > [ 0.135645] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.135653] pci 0000:00:1c.0: PME# disabled > [ 0.135722] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.135729] pci 0000:00:1c.1: PME# disabled > [ 0.135798] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.135805] pci 0000:00:1c.2: PME# disabled > [ 0.135874] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > [ 0.135882] pci 0000:00:1c.3: PME# disabled > [ 0.135985] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.135993] pci 0000:00:1c.4: PME# disabled > [ 0.136061] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > [ 0.136068] pci 0000:00:1c.5: PME# disabled > [ 0.136130] PCI: 0000:00:1d.0 reg 20 io port: [b480, b49f] > [ 0.136214] PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f] > [ 0.136298] PCI: 0000:00:1d.2 reg 20 io port: [b080, b09f] > [ 0.136382] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff] > [ 0.136440] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.136447] pci 0000:00:1d.7: PME# disabled > [ 0.136653] PCI: 0000:00:1f.2 reg 10 io port: [b000, b007] > [ 0.136661] PCI: 0000:00:1f.2 reg 14 io port: [ac00, ac03] > [ 0.136668] PCI: 0000:00:1f.2 reg 18 io port: [a880, a887] > [ 0.136675] PCI: 0000:00:1f.2 reg 1c io port: [a800, a803] > [ 0.136682] PCI: 0000:00:1f.2 reg 20 io port: [a480, a49f] > [ 0.136690] PCI: 0000:00:1f.2 reg 24 32bit mmio: [f9fff000, f9fff7ff] > [ 0.136723] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.136730] pci 0000:00:1f.2: PME# disabled > [ 0.136810] PCI: 0000:01:00.0 reg 10 32bit mmio: [fc000000, fcffffff] > [ 0.136824] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff] > [ 0.136850] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff] > [ 0.136865] PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f] > [ 0.136878] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 7ffff] > [ 0.136964] PCI: bridge 0000:00:01.0 io port: [c000, cfff] > [ 0.136967] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fdefffff] > [ 0.136971] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] > [ 0.137147] PCI: 0000:03:00.0 reg 10 64bit mmio: [fdffe000, fdffffff] > [ 0.137264] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > [ 0.137278] pci 0000:03:00.0: PME# disabled > [ 0.137331] PCI: bridge 0000:00:1c.1 32bit mmio: [fdf00000, fdffffff] > [ 0.137393] PCI: bridge 0000:00:1c.2 io port: [d000, dfff] > [ 0.137398] PCI: bridge 0000:00:1c.2 32bit mmio: [fe000000, fe9fffff] > [ 0.137405] PCI: bridge 0000:00:1c.2 64bit mmio pref: [f6000000, f8efffff] > [ 0.137691] PCI: 0000:08:00.0 reg 10 io port: [e800, e8ff] > [ 0.137738] PCI: 0000:08:00.0 reg 18 32bit mmio: [f8fff000, f8ffffff] > [ 0.137785] PCI: 0000:08:00.0 reg 20 32bit mmio: [f8fe0000, f8feffff] > [ 0.137839] PCI: 0000:08:00.0 reg 30 32bit mmio: [feaf0000, feafffff] > [ 0.137947] pci 0000:08:00.0: supports D1 > [ 0.137948] pci 0000:08:00.0: supports D2 > [ 0.137949] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.137967] pci 0000:08:00.0: PME# disabled > [ 0.138020] PCI: bridge 0000:00:1c.5 io port: [e000, efff] > [ 0.138024] PCI: bridge 0000:00:1c.5 32bit mmio: [fea00000, feafffff] > [ 0.138032] PCI: bridge 0000:00:1c.5 64bit mmio pref: [f8f00000, f8ffffff] > [ 0.138074] PCI: 0000:09:01.0 reg 10 32bit mmio: [febff800, febfffff] > [ 0.138127] pci 0000:09:01.0: PME# supported from D0 D3hot D3cold > [ 0.138134] pci 0000:09:01.0: PME# disabled > [ 0.138170] PCI: 0000:09:01.1 reg 10 32bit mmio: [febff400, febff4ff] > [ 0.138222] pci 0000:09:01.1: supports D1 > [ 0.138223] pci 0000:09:01.1: supports D2 > [ 0.138225] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.138232] pci 0000:09:01.1: PME# disabled > [ 0.138268] PCI: 0000:09:01.2 reg 10 32bit mmio: [febff000, febff0ff] > [ 0.138320] pci 0000:09:01.2: supports D1 > [ 0.138321] pci 0000:09:01.2: supports D2 > [ 0.138323] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.138330] pci 0000:09:01.2: PME# disabled > [ 0.138366] PCI: 0000:09:01.3 reg 10 32bit mmio: [febfec00, febfecff] > [ 0.138417] pci 0000:09:01.3: supports D1 > [ 0.138418] pci 0000:09:01.3: supports D2 > [ 0.138420] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.138427] pci 0000:09:01.3: PME# disabled > [ 0.138481] pci 0000:00:1e.0: transparent bridge > [ 0.138490] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff] > [ 0.138541] bus 00 -> node 0 > [ 0.138549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.138850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 0.138977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] > [ 0.139095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 0.139248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > [ 0.139387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] > [ 0.139503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > [ 0.167118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) > [ 0.167287] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) > [ 0.167452] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) > [ 0.168091] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12) > [ 0.168258] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. > [ 0.168424] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12) > [ 0.168590] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12) > [ 0.168756] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) > [ 0.171548] ACPI Warning (tbutils-0217): Incorrect checksum in > table [ATKG] - CC, should be E5 [20080609] > [ 0.171599] ACPI: WMI: Mapper loaded > [ 0.171599] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.171599] pnp: PnP ACPI init > [ 0.171599] ACPI: bus type pnp registered > [ 0.175197] pnp: PnP ACPI: found 16 devices > [ 0.175201] ACPI: ACPI bus type pnp unregistered > [ 0.175213] SCSI subsystem initialized > [ 0.175213] libata version 3.00 loaded. > [ 0.175213] usbcore: registered new interface driver usbfs > [ 0.175213] usbcore: registered new interface driver hub > [ 0.175213] usbcore: registered new device driver usb > [ 0.175213] PCI: Using ACPI for IRQ routing > [ 0.184979] NetLabel: Initializing > [ 0.184983] NetLabel: domain hash size = 128 > [ 0.184986] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.184998] NetLabel: unlabeled traffic allowed by default > [ 0.185003] DMAR:Host address width 36 > [ 0.185007] DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000 > [ 0.185012] DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000 > [ 0.185017] DMAR:RMRR base: 0x00000000000e1000 end: 0x00000000000e3fff > [ 0.185025] DMAR:RMRR base: 0x00000000bfff0000 end: 0x00000000bfffffff > [ 0.185069] IOMMU: Setting identity map for device 0000:00:1d.0 > [0xbfff0000 - 0xc0000000] > [ 0.185101] IOMMU: Setting identity map for device 0000:00:1d.1 > [0xbfff0000 - 0xc0000000] > [ 0.185125] IOMMU: Setting identity map for device 0000:00:1d.2 > [0xbfff0000 - 0xc0000000] > [ 0.185149] IOMMU: Setting identity map for device 0000:00:1d.7 > [0xbfff0000 - 0xc0000000] > [ 0.185173] IOMMU: Setting identity map for device 0000:00:1a.0 > [0xbfff0000 - 0xc0000000] > [ 0.185196] IOMMU: Setting identity map for device 0000:00:1a.1 > [0xbfff0000 - 0xc0000000] > [ 0.185220] IOMMU: Setting identity map for device 0000:00:1a.2 > [0xbfff0000 - 0xc0000000] > [ 0.185243] IOMMU: Setting identity map for device 0000:00:1a.7 > [0xbfff0000 - 0xc0000000] > [ 0.185266] IOMMU: Setting identity map for device 0000:00:1d.0 > [0xe1000 - 0xe4000] > [ 0.185279] IOMMU: Setting identity map for device 0000:00:1d.1 > [0xe1000 - 0xe4000] > [ 0.185292] IOMMU: Setting identity map for device 0000:00:1d.2 > [0xe1000 - 0xe4000] > [ 0.185305] IOMMU: Setting identity map for device 0000:00:1d.7 > [0xe1000 - 0xe4000] > [ 0.185323] IOMMU: Setting identity map for device 0000:00:1a.0 > [0xe1000 - 0xe4000] > [ 0.185337] IOMMU: Setting identity map for device 0000:00:1a.1 > [0xe1000 - 0xe4000] > [ 0.185350] IOMMU: Setting identity map for device 0000:00:1a.2 > [0xe1000 - 0xe4000] > [ 0.185363] IOMMU: Setting identity map for device 0000:00:1a.7 > [0xe1000 - 0xe4000] > [ 0.185387] IOMMU: gfx device 0000:01:00.0 1-1 mapping > [ 0.185391] IOMMU: Setting identity map for device 0000:01:00.0 > [0x0 - 0x9e000] > [ 0.185455] IOMMU: Setting identity map for device 0000:01:00.0 > [0x100000 - 0xbff80000] > [ 0.401687] IOMMU: Setting identity map for device 0000:01:00.0 > [0x100000000 - 0x140000000] > [ 0.474350] IOMMU: Prepare 0-16M unity mapping for LPC > [ 0.474357] IOMMU: Setting identity map for device 0000:00:1f.0 > [0x0 - 0x1000000] > [ 0.475528] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O > [ 0.475551] PCI-GART: No AMD northbridge found. > [ 0.475560] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.475567] hpet0: 4 64-bit timers, 14318180 Hz > [ 0.476973] ACPI: RTC can wake from S4 > [ 0.481942] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved > [ 0.481956] system 00:08: ioport range 0x4d0-0x4d1 has been reserved > [ 0.481962] system 00:08: ioport range 0x800-0x87f has been reserved > [ 0.481967] system 00:08: ioport range 0x400-0x41f has been reserved > [ 0.481972] system 00:08: ioport range 0x500-0x57f has been reserved > [ 0.481978] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved > [ 0.481983] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved > [ 0.481989] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved > [ 0.481994] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved > [ 0.482000] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved > [ 0.482005] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved > [ 0.482011] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved > [ 0.482017] system 00:08: iomem range 0xffb00000-0xffbfffff could > not be reserved > [ 0.482023] system 00:08: iomem range 0xfff00000-0xffffffff could > not be reserved > [ 0.482033] system 00:0a: iomem range 0xffa00000-0xffbfffff could > not be reserved > [ 0.482039] system 00:0a: iomem range 0xffe00000-0xffffffff could > not be reserved > [ 0.482048] system 00:0b: iomem range 0xffc00000-0xffdfffff could > not be reserved > [ 0.482057] system 00:0c: ioport range 0x250-0x253 has been reserved > [ 0.482062] system 00:0c: ioport range 0x256-0x25f has been reserved > [ 0.482067] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved > [ 0.482073] system 00:0c: iomem range 0xfee00000-0xfee00fff could > not be reserved > [ 0.482079] system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved > [ 0.482090] system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved > [ 0.482096] system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved > [ 0.482101] system 00:0c: iomem range 0xfec28000-0xfec2ffff has been reserved > [ 0.482107] system 00:0c: iomem range 0xfec30000-0xfec37fff has been reserved > [ 0.482112] system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved > [ 0.482121] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved > [ 0.482130] system 00:0f: iomem range 0x0-0x9ffff could not be reserved > [ 0.482135] system 00:0f: iomem range 0xc0000-0xcffff has been reserved > [ 0.482141] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved > [ 0.482146] system 00:0f: iomem range 0x100000-0xbfffffff could not > be reserved > [ 0.486875] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.486881] pci 0000:00:01.0: IO window: 0xc000-0xcfff > [ 0.486887] pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff > [ 0.486893] pci 0000:00:01.0: PREFETCH window: > 0x000000d0000000-0x000000dfffffff > [ 0.486901] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.486905] pci 0000:00:1c.0: IO window: disabled > [ 0.486913] pci 0000:00:1c.0: MEM window: disabled > [ 0.486920] pci 0000:00:1c.0: PREFETCH window: disabled > [ 0.486932] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > [ 0.486936] pci 0000:00:1c.1: IO window: disabled > [ 0.486944] pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff > [ 0.486952] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.486961] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > [ 0.486967] pci 0000:00:1c.2: IO window: 0xd000-0xdfff > [ 0.486976] pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe9fffff > [ 0.486983] pci 0000:00:1c.2: PREFETCH window: > 0x000000f6000000-0x000000f8efffff > [ 0.486995] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 > [ 0.486999] pci 0000:00:1c.3: IO window: disabled > [ 0.487007] pci 0000:00:1c.3: MEM window: disabled > [ 0.487013] pci 0000:00:1c.3: PREFETCH window: disabled > [ 0.487023] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 > [ 0.487028] pci 0000:00:1c.4: IO window: disabled > [ 0.487035] pci 0000:00:1c.4: MEM window: disabled > [ 0.487042] pci 0000:00:1c.4: PREFETCH window: disabled > [ 0.487052] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 > [ 0.487058] pci 0000:00:1c.5: IO window: 0xe000-0xefff > [ 0.487066] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff > [ 0.487074] pci 0000:00:1c.5: PREFETCH window: > 0x000000f8f00000-0x000000f8ffffff > [ 0.487086] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 > [ 0.487090] pci 0000:00:1e.0: IO window: disabled > [ 0.487098] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff > [ 0.487105] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.487123] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.487129] pci 0000:00:01.0: setting latency timer to 64 > [ 0.487137] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.487144] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.487154] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.487161] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.487169] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.487177] pci 0000:00:1c.2: setting latency timer to 64 > [ 0.487186] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 0.487194] pci 0000:00:1c.3: setting latency timer to 64 > [ 0.487202] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.487209] pci 0000:00:1c.4: setting latency timer to 64 > [ 0.487218] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > [ 0.487225] pci 0000:00:1c.5: setting latency timer to 64 > [ 0.487233] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.487237] bus: 00 index 0 io port: [0, ffff] > [ 0.487240] bus: 00 index 1 mmio: [0, ffffffffffffffff] > [ 0.487245] bus: 01 index 0 io port: [c000, cfff] > [ 0.487249] bus: 01 index 1 mmio: [fa000000, fdefffff] > [ 0.487253] bus: 01 index 2 mmio: [d0000000, dfffffff] > [ 0.487257] bus: 01 index 3 mmio: [0, 0] > [ 0.487260] bus: 02 index 0 mmio: [0, 0] > [ 0.487264] bus: 02 index 1 mmio: [0, 0] > [ 0.487267] bus: 02 index 2 mmio: [0, 0] > [ 0.487270] bus: 02 index 3 mmio: [0, 0] > [ 0.487274] bus: 03 index 0 mmio: [0, 0] > [ 0.487277] bus: 03 index 1 mmio: [fdf00000, fdffffff] > [ 0.487281] bus: 03 index 2 mmio: [0, 0] > [ 0.487284] bus: 03 index 3 mmio: [0, 0] > [ 0.487288] bus: 04 index 0 io port: [d000, dfff] > [ 0.487292] bus: 04 index 1 mmio: [fe000000, fe9fffff] > [ 0.487296] bus: 04 index 2 mmio: [f6000000, f8efffff] > [ 0.487300] bus: 04 index 3 mmio: [0, 0] > [ 0.487303] bus: 06 index 0 mmio: [0, 0] > [ 0.487307] bus: 06 index 1 mmio: [0, 0] > [ 0.487310] bus: 06 index 2 mmio: [0, 0] > [ 0.487314] bus: 06 index 3 mmio: [0, 0] > [ 0.487317] bus: 07 index 0 mmio: [0, 0] > [ 0.487320] bus: 07 index 1 mmio: [0, 0] > [ 0.487324] bus: 07 index 2 mmio: [0, 0] > [ 0.487327] bus: 07 index 3 mmio: [0, 0] > [ 0.487330] bus: 08 index 0 io port: [e000, efff] > [ 0.487334] bus: 08 index 1 mmio: [fea00000, feafffff] > [ 0.487338] bus: 08 index 2 mmio: [f8f00000, f8ffffff] > [ 0.487342] bus: 08 index 3 mmio: [0, 0] > [ 0.487346] bus: 09 index 0 mmio: [0, 0] > [ 0.487349] bus: 09 index 1 mmio: [feb00000, febfffff] > [ 0.487353] bus: 09 index 2 mmio: [0, 0] > [ 0.487357] bus: 09 index 3 io port: [0, ffff] > [ 0.487360] bus: 09 index 4 mmio: [0, ffffffffffffffff] > [ 0.487371] NET: Registered protocol family 2 > [ 0.498964] IP route cache hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.499248] TCP established hash table entries: 262144 (order: 10, > 4194304 bytes) > [ 0.500207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.500500] TCP: Hash tables configured (established 262144 bind 65536) > [ 0.500505] TCP reno registered > [ 0.500589] Switched to high resolution mode on CPU 1 > [ 0.500929] Switched to high resolution mode on CPU 0 > [ 0.503062] NET: Registered protocol family 1 > [ 0.503183] Simple Boot Flag at 0x51 set to 0x1 > [ 0.503700] IA-32 Microcode Update Driver: v1.14a > <tigran@...azian.fsnet.co.uk> > [ 0.504106] audit: initializing netlink socket (disabled) > [ 0.504123] type=2000 audit(1226972338.504:1): initialized > [ 0.504438] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.506368] VFS: Disk quotas dquot_6.5.1 > [ 0.506432] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.507125] fuse init (API version 7.9) > [ 0.507376] JFS: nTxBlock = 8192, nTxLock = 65536 > [ 0.510247] msgmni has been set to 8022 > [ 0.510495] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 0.510502] io scheduler noop registered > [ 0.510505] io scheduler anticipatory registered > [ 0.510509] io scheduler deadline registered > [ 0.510565] io scheduler cfq registered (default) > [ 0.510585] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 > [ 0.510587] pci 0000:00:1a.0: Performing full reset > [ 0.510606] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 > [ 0.510607] pci 0000:00:1a.1: Performing full reset > [ 0.510626] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 > [ 0.510628] pci 0000:00:1a.2: Performing full reset > [ 0.510675] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 > [ 0.510677] pci 0000:00:1d.0: Performing full reset > [ 0.510695] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 > [ 0.510697] pci 0000:00:1d.1: Performing full reset > [ 0.510715] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 > [ 0.510717] pci 0000:00:1d.2: Performing full reset > [ 0.510782] pci 0000:01:00.0: Boot video device > [ 0.510881] pcieport-driver 0000:00:01.0: setting latency timer to 64 > [ 0.510908] pcieport-driver 0000:00:01.0: found MSI capability > [ 0.510937] pci_express 0000:00:01.0:pcie00: allocate port service > [ 0.510971] pci_express 0000:00:01.0:pcie02: allocate port service > [ 0.511003] pci_express 0000:00:01.0:pcie03: allocate port service > [ 0.511081] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 0.511126] pcieport-driver 0000:00:1c.0: found MSI capability > [ 0.511174] pci_express 0000:00:1c.0:pcie00: allocate port service > [ 0.511207] pci_express 0000:00:1c.0:pcie03: allocate port service > [ 0.511309] pcieport-driver 0000:00:1c.1: setting latency timer to 64 > [ 0.511353] pcieport-driver 0000:00:1c.1: found MSI capability > [ 0.511402] pci_express 0000:00:1c.1:pcie00: allocate port service > [ 0.511433] pci_express 0000:00:1c.1:pcie03: allocate port service > [ 0.511533] pcieport-driver 0000:00:1c.2: setting latency timer to 64 > [ 0.511579] pcieport-driver 0000:00:1c.2: found MSI capability > [ 0.511627] pci_express 0000:00:1c.2:pcie00: allocate port service > [ 0.511659] pci_express 0000:00:1c.2:pcie02: allocate port service > [ 0.511690] pci_express 0000:00:1c.2:pcie03: allocate port service > [ 0.511787] pcieport-driver 0000:00:1c.3: setting latency timer to 64 > [ 0.511833] pcieport-driver 0000:00:1c.3: found MSI capability > [ 0.511881] pci_express 0000:00:1c.3:pcie00: allocate port service > [ 0.511911] pci_express 0000:00:1c.3:pcie02: allocate port service > [ 0.511942] pci_express 0000:00:1c.3:pcie03: allocate port service > [ 0.512040] pcieport-driver 0000:00:1c.4: setting latency timer to 64 > [ 0.512083] pcieport-driver 0000:00:1c.4: found MSI capability > [ 0.512133] pci_express 0000:00:1c.4:pcie00: allocate port service > [ 0.512166] pci_express 0000:00:1c.4:pcie03: allocate port service > [ 0.512267] pcieport-driver 0000:00:1c.5: setting latency timer to 64 > [ 0.512310] pcieport-driver 0000:00:1c.5: found MSI capability > [ 0.512358] pci_express 0000:00:1c.5:pcie00: allocate port service > [ 0.512389] pci_express 0000:00:1c.5:pcie03: allocate port service > [ 0.512540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.512993] pciehp: HPC vendor_id 8086 device_id 2a41 ss_vid 0 ss_did 0 > [ 0.513068] hpdriver 0000:00:01.0:pcie02: service driver hpdriver loaded > [ 0.513279] pciehp: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0 > [ 0.513334] hpdriver 0000:00:1c.2:pcie02: service driver hpdriver loaded > [ 0.513538] pciehp: HPC vendor_id 8086 device_id 2946 ss_vid 0 ss_did 0 > [ 0.513593] hpdriver 0000:00:1c.3:pcie02: service driver hpdriver loaded > [ 0.513622] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.515966] hpet_resources: 0xfed00000 is busy > [ 0.516068] Non-volatile memory driver v1.2 > [ 0.516072] Linux agpgart interface v0.103 > [ 0.516410] vesafb: framebuffer at 0xfb000000, mapped to > 0xffffc20010680000, using 10240k, total 14336k > [ 0.516417] vesafb: mode is 1280x1024x32, linelength=5120, pages=1 > [ 0.516422] vesafb: scrolling: redraw > [ 0.516426] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 0.576794] Console: switching to colour frame buffer device 160x64 > [ 0.633370] fb0: VESA VGA frame buffer device > [ 0.633844] ACPI: AC Adapter [AC0] (on-line) > [ 1.456203] ACPI: EC: non-query interrupt received, switching to > interrupt mode > [ 1.469922] ACPI: Battery Slot [BAT0] (battery present) > [ 1.470488] input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 1.476005] ACPI: Power Button (FF) [PWRF] > [ 1.476420] input: Sleep Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 > [ 1.481050] ACPI: Sleep Button (CM) [SLPB] > [ 1.481512] input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 > [ 1.486412] ACPI: Lid Switch [LID] > [ 1.487156] ACPI: SSDT BFF96CD0, 0248 (r1 PmRef Cpu0Ist 3000 > INTL 20051117) > [ 1.488259] ACPI: SSDT BFF96FB0, 0765 (r1 PmRef Cpu0Cst 3001 > INTL 20051117) > [ 1.489589] Monitor-Mwait will be used to enter C-1 state > [ 1.489591] Monitor-Mwait will be used to enter C-3 state > [ 1.489622] ACPI: CPU0 (power states: C1[C1] C2[C3]) > [ 1.490057] processor ACPI0007:00: registered as cooling_device0 > [ 1.490475] ACPI: Processor [P001] (supports 8 throttling states) > [ 1.491272] ACPI: SSDT BFF96C00, 00CC (r1 PmRef Cpu1Ist 3000 > INTL 20051117) > [ 1.492227] ACPI: SSDT BFF96F20, 0085 (r1 PmRef Cpu1Cst 3000 > INTL 20051117) > [ 1.493651] ACPI: CPU1 (power states: C1[C1] C2[C3]) > [ 1.494079] processor ACPI0007:01: registered as cooling_device1 > [ 1.494503] ACPI: Processor [P002] (supports 8 throttling states) > [ 1.504047] ACPI: Expecting a [Reference] package element, found type C > [ 1.504599] thermal LNXTHERM:01: registered as thermal_zone0 > [ 1.506963] ACPI: Thermal Zone [THRM] (49 C) > [ 1.507322] [drm] Initialized drm 1.1.0 20060810 > [ 1.507646] Serial: 8250/16550 driver4 ports, IRQ sharing enabled > [ 1.509552] brd: module loaded > [ 1.510308] loop: module loaded > [ 1.510567] asus-laptop: Asus Laptop Support version 0.42 > [ 1.514847] asus-laptop: M50Vm model detected > [ 1.528742] Registered led device: asus::mail > [ 1.529077] Registered led device: asus::touchpad > [ 1.529611] Loading iSCSI transport class v2.0-870. > [ 1.530117] Driver 'sd' needs updating - please use bus_type methods > [ 1.530587] Driver 'sr' needs updating - please use bus_type methods > [ 1.542242] ahci 0000:00:1f.2: version 3.0 > [ 1.542255] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 1.554330] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 > Gbps 0x23 impl SATA mode > [ 1.566782] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led > clo pio slum part ems > [ 1.579572] ahci 0000:00:1f.2: setting latency timer to 64 > [ 1.579794] scsi0 : ahci > [ 1.592686] scsi1 : ahci > [ 1.605609] scsi2 : ahci > [ 1.618583] scsi3 : ahci > [ 1.631607] scsi4 : ahci > [ 1.644660] scsi5 : ahci > [ 1.657907] ata1: SATA max UDMA/133 abar m2048@...9fff000 port > 0xf9fff100 irq 374 > [ 1.671638] ata2: SATA max UDMA/133 abar m2048@...9fff000 port > 0xf9fff180 irq 374 > [ 1.685394] ata3: DUMMY > [ 1.699184] ata4: DUMMY > [ 1.713029] ata5: DUMMY > [ 1.726918] ata6: SATA max UDMA/133 abar m2048@...9fff000 port > 0xf9fff380 irq 374 > [ 2.046022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.062219] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > [ 2.077572] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded > [ 2.077756] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > [ 2.078633] ata1.00: ATA-8: Hitachi HTS545050KTA300, BKFOC60G, max UDMA/133 > [ 2.094186] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 2.111574] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > [ 2.127949] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded > [ 2.128135] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > [ 2.129017] ata1.00: configured for UDMA/133 > [ 2.879016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.900632] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded > [ 2.901094] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > [ 2.906126] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR04, max > UDMA/133, ATAPI AN > [ 2.928780] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded > [ 2.929241] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > [ 2.934222] ata2.00: configured for UDMA/133 > [ 3.267014] ata6: SATA link down (SStatus 0 SControl 300) > [ 3.295079] scsi 0:0:0:0: Direct-Access ATA Hitachi > HTS54505 BKFO PQ: 0 ANSI: 5 > [ 3.312700] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) > [ 3.330155] sd 0:0:0:0: [sda] Write Protect is off > [ 3.347349] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.347372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.364799] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) > [ 3.382013] sd 0:0:0:0: [sda] Write Protect is off > [ 3.398892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.398914] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.415912] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > [ 3.502852] sd 0:0:0:0: [sda] Attached SCSI disk > [ 3.519449] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.538858] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM > GSA-T50N RR04 PQ: 0 ANSI: 5 > [ 3.779055] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw > xa/form2 cdda tray > [ 3.796077] Uniform CD-ROM driver Revision: 3.20 > [ 3.813015] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 3.813082] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 3.830136] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 > [ 3.830154] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 3.847158] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 3.847161] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 3.864269] drivers/usb/core/inode.c: creating file 'devices' > [ 3.864272] drivers/usb/core/inode.c: creating file '001' > [ 3.864313] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned > bus number 1 > [ 3.881436] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 > cc=3 pcc=2 ordered !ppc ports=6 > [ 3.881439] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 > uframes 1024 64 bit addr > [ 3.881473] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 3.885368] ehci_hcd 0000:00:1a.7: debug port 1 > [ 3.902246] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > [ 3.902248] ehci_hcd 0000:00:1a.7: supports USB remote wakeup > [ 3.902259] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 > [ 3.919065] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 3.922956] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 > ithresh=1 period=1024 RUN > [ 3.928006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, > driver 10 Dec 2004 > [ 3.944865] usb usb1: default language 0x0409 > [ 3.944894] usb usb1: uevent > [ 3.944921] usb usb1: usb_probe_device > [ 3.944923] usb usb1: configuration #1 chosen from 1 choice > [ 3.961714] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 3.961727] usb 1-0:1.0: uevent > [ 3.961753] hub 1-0:1.0: usb_probe_interface > [ 3.961755] hub 1-0:1.0: usb_probe_interface - got id > [ 3.961757] hub 1-0:1.0: USB hub found > [ 3.978380] hub 1-0:1.0: 6 ports detected > [ 3.994935] hub 1-0:1.0: standalone hub > [ 3.994936] hub 1-0:1.0: no power switching (usb 1.0) > [ 3.994938] hub 1-0:1.0: individual port over-current protection > [ 3.994939] hub 1-0:1.0: power on to power good time: 20ms > [ 3.994943] hub 1-0:1.0: local power source is good > [ 3.994945] hub 1-0:1.0: trying to enable port power on non-switchable hub > [ 4.095019] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 > POWER sig=j CSC CONNECT > [ 4.095022] hub 1-0:1.0: port 6: status 0501 change 0001 > [ 4.196011] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000 > [ 4.196072] drivers/usb/core/inode.c: creating file '001' > [ 4.196087] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s > [ 4.196124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 4.212911] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 4.229736] usb usb1: Product: EHCI Host Controller > [ 4.246607] usb usb1: Manufacturer: Linux 2.6.27-gentoo-r2 ehci_hcd > [ 4.247486] ehci_hcd 0000:00:1a.7: port 6 full speed --> companion > [ 4.247489] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003801 > POWER OWNER sig=j CONNECT > [ 4.247492] hub 1-0:1.0: port 6 not reset yet, waiting 50ms > [ 4.263771] usb usb1: SerialNumber: 0000:00:1a.7 > [ 4.280720] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 4.297942] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 4.297945] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 4.298256] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 > POWER OWNER sig=se0 CSC > [ 4.315283] drivers/usb/core/inode.c: creating file '002' > [ 4.315320] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 2 > [ 4.332789] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 > cc=3 pcc=2 ordered !ppc ports=6 > [ 4.332792] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 > uframes 1024 64 bit addr > [ 4.332817] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 4.336703] ehci_hcd 0000:00:1d.7: debug port 1 > [ 4.353902] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 4.353904] ehci_hcd 0000:00:1d.7: supports USB remote wakeup > [ 4.353914] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 > [ 4.371349] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 4.375238] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 > ithresh=1 period=1024 RUN > [ 4.380006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, > driver 10 Dec 2004 > [ 4.397461] usb usb2: default language 0x0409 > [ 4.397489] usb usb2: uevent > [ 4.397515] usb usb2: usb_probe_device > [ 4.397517] usb usb2: configuration #1 chosen from 1 choice > [ 4.414848] usb usb2: adding 2-0:1.0 (config #1, interface 0) > [ 4.414860] usb 2-0:1.0: uevent > [ 4.414886] hub 2-0:1.0: usb_probe_interface > [ 4.414888] hub 2-0:1.0: usb_probe_interface - got id > [ 4.414889] hub 2-0:1.0: USB hub found > [ 4.432042] hub 2-0:1.0: 6 ports detected > [ 4.448984] hub 2-0:1.0: standalone hub > [ 4.448985] hub 2-0:1.0: no power switching (usb 1.0) > [ 4.448987] hub 2-0:1.0: individual port over-current protection > [ 4.448988] hub 2-0:1.0: power on to power good time: 20ms > [ 4.448992] hub 2-0:1.0: local power source is good > [ 4.448993] hub 2-0:1.0: trying to enable port power on non-switchable hub > [ 4.549019] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 > POWER sig=j CSC CONNECT > [ 4.549022] hub 2-0:1.0: port 5: status 0501 change 0001 > [ 4.650009] hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000 > [ 4.650048] drivers/usb/core/inode.c: creating file '001' > [ 4.650057] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s > [ 4.650096] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 4.667507] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 4.685221] usb usb2: Product: EHCI Host Controller > [ 4.701517] ehci_hcd 0000:00:1d.7: port 5 high speed > [ 4.701519] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 > POWER sig=se0 PE CONNECT > [ 4.703278] usb usb2: Manufacturer: Linux 2.6.27-gentoo-r2 ehci_hcd > [ 4.721462] usb usb2: SerialNumber: 0000:00:1d.7 > [ 4.739790] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller > (OHCI) Driver > [ 4.739792] ohci_hcd: block sizes: ed 80 td 96 > [ 4.739831] USB Universal Host Controller Interface driver v3.0 > [ 4.752257] usb 2-5: new high speed USB device using ehci_hcd and address 2 > [ 4.777041] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 4.795926] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 4.795929] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 4.814889] drivers/usb/core/inode.c: creating file '003' > [ 4.814934] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > bus number 3 > [ 4.827520] ehci_hcd 0000:00:1d.7: port 5 high speed > [ 4.827522] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 > POWER sig=se0 PE CONNECT > [ 4.834406] uhci_hcd 0000:00:1a.0: detected 2 ports > [ 4.853392] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 > [ 4.853394] uhci_hcd 0000:00:1a.0: Performing full reset > [ 4.853408] uhci_hcd 0000:00:1a.0: supports USB remote wakeup > [ 4.853418] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 > [ 4.872279] usb usb3: default language 0x0409 > [ 4.872306] usb usb3: uevent > [ 4.872332] usb usb3: usb_probe_device > [ 4.872334] usb usb3: configuration #1 chosen from 1 choice > [ 4.891180] usb usb3: adding 3-0:1.0 (config #1, interface 0) > [ 4.891192] usb 3-0:1.0: uevent > [ 4.891221] hub 3-0:1.0: usb_probe_interface > [ 4.891222] hub 3-0:1.0: usb_probe_interface - got id > [ 4.891224] hub 3-0:1.0: USB hub found > [ 4.909928] hub 3-0:1.0: 2 ports detected > [ 4.928407] hub 3-0:1.0: standalone hub > [ 4.928409] usb 2-5: skipped 1 descriptor after configuration > [ 4.928411] usb 2-5: skipped 5 descriptors after interface > [ 4.928413] usb 2-5: skipped 1 descriptor after endpoint > [ 4.928415] hub 3-0:1.0: no power switching (usb 1.0) > [ 4.928416] hub 3-0:1.0: individual port over-current protection > [ 4.928418] hub 3-0:1.0: power on to power good time: 2ms > [ 4.928420] usb 2-5: skipped 10 descriptors after interface > [ 4.928421] hub 3-0:1.0: local power source is good > [ 4.928423] hub 3-0:1.0: trying to enable port power on non-switchable hub > [ 4.928529] usb 2-5: default language 0x0409 > [ 4.928678] usb 2-5: uevent > [ 4.928707] usb 2-5: usb_probe_device > [ 4.928709] usb 2-5: configuration #1 chosen from 1 choice > [ 4.947280] usb 2-5: adding 2-5:1.0 (config #1, interface 0) > [ 4.947296] usb 2-5:1.0: uevent > [ 4.947359] usb 2-5: adding 2-5:1.1 (config #1, interface 1) > [ 4.947375] usb 2-5:1.1: uevent > [ 4.947436] drivers/usb/core/inode.c: creating file '002' > [ 4.947483] usb 2-5: New USB device found, idVendor=04f2, idProduct=b033 > [ 4.966104] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [ 4.984709] usb 2-5: Product: USB2.0 1.3M UVC WebCam > [ 5.029047] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 5.029057] drivers/usb/core/inode.c: creating file '001' > [ 5.029103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 5.047603] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 5.066100] usb usb3: Product: UHCI Host Controller > [ 5.084365] usb usb3: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 5.102570] usb usb3: SerialNumber: 0000:00:1a.0 > [ 5.120671] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 5.138975] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 5.138978] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 5.156993] drivers/usb/core/inode.c: creating file '004' > [ 5.157034] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned > bus number 4 > [ 5.175155] uhci_hcd 0000:00:1a.1: detected 2 ports > [ 5.175159] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.175160] uhci_hcd 0000:00:1a.1: Performing full reset > [ 5.175175] uhci_hcd 0000:00:1a.1: supports USB remote wakeup > [ 5.175185] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 > [ 5.175222] usb usb4: default language 0x0409 > [ 5.175250] usb usb4: uevent > [ 5.175278] usb usb4: usb_probe_device > [ 5.175280] usb usb4: configuration #1 chosen from 1 choice > [ 5.175284] usb usb4: adding 4-0:1.0 (config #1, interface 0) > [ 5.175297] usb 4-0:1.0: uevent > [ 5.175323] hub 4-0:1.0: usb_probe_interface > [ 5.175324] hub 4-0:1.0: usb_probe_interface - got id > [ 5.175326] hub 4-0:1.0: USB hub found > [ 5.175332] hub 4-0:1.0: 2 ports detected > [ 5.175333] hub 4-0:1.0: standalone hub > [ 5.175334] hub 4-0:1.0: no power switching (usb 1.0) > [ 5.175335] hub 4-0:1.0: individual port over-current protection > [ 5.175336] hub 4-0:1.0: power on to power good time: 2ms > [ 5.175339] hub 4-0:1.0: local power source is good > [ 5.175341] hub 4-0:1.0: trying to enable port power on non-switchable hub > [ 5.276044] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 5.276055] drivers/usb/core/inode.c: creating file '001' > [ 5.276105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 5.293537] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 5.310875] usb usb4: Product: UHCI Host Controller > [ 5.328165] usb usb4: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 5.345430] usb usb4: SerialNumber: 0000:00:1a.1 > [ 5.362610] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 5.380053] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 5.380056] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 5.380092] drivers/usb/core/inode.c: creating file '005' > [ 5.380139] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned > bus number 5 > [ 5.380145] uhci_hcd 0000:00:1a.2: detected 2 ports > [ 5.380149] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.380151] uhci_hcd 0000:00:1a.2: Performing full reset > [ 5.380165] uhci_hcd 0000:00:1a.2: supports USB remote wakeup > [ 5.380175] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 > [ 5.380215] usb usb5: default language 0x0409 > [ 5.380244] usb usb5: uevent > [ 5.380272] usb usb5: usb_probe_device > [ 5.380274] usb usb5: configuration #1 chosen from 1 choice > [ 5.380277] usb usb5: adding 5-0:1.0 (config #1, interface 0) > [ 5.380289] usb 5-0:1.0: uevent > [ 5.380317] hub 5-0:1.0: usb_probe_interface > [ 5.380318] hub 5-0:1.0: usb_probe_interface - got id > [ 5.380320] hub 5-0:1.0: USB hub found > [ 5.380325] hub 5-0:1.0: 2 ports detected > [ 5.380326] hub 5-0:1.0: standalone hub > [ 5.380327] hub 5-0:1.0: no power switching (usb 1.0) > [ 5.380329] hub 5-0:1.0: individual port over-current protection > [ 5.380330] hub 5-0:1.0: power on to power good time: 2ms > [ 5.380333] hub 5-0:1.0: local power source is good > [ 5.380334] hub 5-0:1.0: trying to enable port power on non-switchable hub > [ 5.481013] uhci_hcd 0000:00:1a.2: port 2 portsc 0093,00 > [ 5.481015] hub 5-0:1.0: port 2: status 0101 change 0001 > [ 5.582040] hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000 > [ 5.582051] drivers/usb/core/inode.c: creating file '001' > [ 5.582086] hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s > [ 5.582112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 5.599296] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 5.616420] usb usb5: Product: UHCI Host Controller > [ 5.633457] usb usb5: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 5.650635] usb usb5: SerialNumber: 0000:00:1a.2 > [ 5.667639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 5.684873] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 5.684876] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 5.701970] drivers/usb/core/inode.c: creating file '006' > [ 5.702009] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 6 > [ 5.719246] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 5.736389] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.736391] uhci_hcd 0000:00:1d.0: Performing full reset > [ 5.736405] uhci_hcd 0000:00:1d.0: supports USB remote wakeup > [ 5.736408] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 > [ 5.753588] usb usb6: default language 0x0409 > [ 5.753617] usb usb6: uevent > [ 5.753627] usb 5-2: new full speed USB device using uhci_hcd and address 2 > [ 5.770814] usb usb6: usb_probe_device > [ 5.770816] usb usb6: configuration #1 chosen from 1 choice > [ 5.787970] usb usb6: adding 6-0:1.0 (config #1, interface 0) > [ 5.787983] usb 6-0:1.0: uevent > [ 5.788016] hub 6-0:1.0: usb_probe_interface > [ 5.788017] hub 6-0:1.0: usb_probe_interface - got id > [ 5.788019] hub 6-0:1.0: USB hub found > [ 5.805183] hub 6-0:1.0: 2 ports detected > [ 5.822107] hub 6-0:1.0: standalone hub > [ 5.822108] hub 6-0:1.0: no power switching (usb 1.0) > [ 5.822110] hub 6-0:1.0: individual port over-current protection > [ 5.822111] hub 6-0:1.0: power on to power good time: 2ms > [ 5.822115] hub 6-0:1.0: local power source is good > [ 5.822117] hub 6-0:1.0: trying to enable port power on non-switchable hub > [ 5.905004] usb 5-2: ep0 maxpacket = 8 > [ 5.923057] drivers/usb/core/inode.c: creating file '001' > [ 5.923102] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 5.940308] usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 5.942225] usb 5-2: default language 0x0409 > [ 5.957485] usb usb6: Product: UHCI Host Controller > [ 5.974545] usb usb6: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 5.974567] usb 5-2: uevent > [ 5.991713] usb usb6: SerialNumber: 0000:00:1d.0 > [ 5.991733] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 5.991738] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 5.991741] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 5.991795] drivers/usb/core/inode.c: creating file '007' > [ 5.991840] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 7 > [ 5.991846] uhci_hcd 0000:00:1d.1: detected 2 ports > [ 5.991850] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 > [ 5.991852] uhci_hcd 0000:00:1d.1: Performing full reset > [ 5.991867] uhci_hcd 0000:00:1d.1: supports USB remote wakeup > [ 5.991870] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 > [ 5.991916] usb usb7: default language 0x0409 > [ 5.991949] usb usb7: uevent > [ 5.991977] usb usb7: usb_probe_device > [ 5.991979] usb usb7: configuration #1 chosen from 1 choice > [ 5.991983] usb usb7: adding 7-0:1.0 (config #1, interface 0) > [ 5.991994] usb 7-0:1.0: uevent > [ 5.992027] hub 7-0:1.0: usb_probe_interface > [ 5.992029] hub 7-0:1.0: usb_probe_interface - got id > [ 5.992030] hub 7-0:1.0: USB hub found > [ 5.992037] hub 7-0:1.0: 2 ports detected > [ 5.992038] hub 7-0:1.0: standalone hub > [ 5.992039] hub 7-0:1.0: no power switching (usb 1.0) > [ 5.992040] hub 7-0:1.0: individual port over-current protection > [ 5.992042] hub 7-0:1.0: power on to power good time: 2ms > [ 5.992045] hub 7-0:1.0: local power source is good > [ 5.992046] hub 7-0:1.0: trying to enable port power on non-switchable hub > [ 6.093059] drivers/usb/core/inode.c: creating file '001' > [ 6.093115] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.093117] usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 6.093118] usb usb7: Product: UHCI Host Controller > [ 6.093119] usb usb7: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 6.093121] usb usb7: SerialNumber: 0000:00:1d.1 > [ 6.093139] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 6.093145] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 6.093148] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 6.093183] drivers/usb/core/inode.c: creating file '008' > [ 6.093227] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 8 > [ 6.093234] uhci_hcd 0000:00:1d.2: detected 2 ports > [ 6.093238] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 > [ 6.093239] uhci_hcd 0000:00:1d.2: Performing full reset > [ 6.093253] uhci_hcd 0000:00:1d.2: supports USB remote wakeup > [ 6.093256] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 > [ 6.093301] usb usb8: default language 0x0409 > [ 6.093329] usb usb8: uevent > [ 6.093357] usb usb8: usb_probe_device > [ 6.093358] usb usb8: configuration #1 chosen from 1 choice > [ 6.093362] usb usb8: adding 8-0:1.0 (config #1, interface 0) > [ 6.093375] usb 8-0:1.0: uevent > [ 6.093403] hub 8-0:1.0: usb_probe_interface > [ 6.093404] hub 8-0:1.0: usb_probe_interface - got id > [ 6.093405] hub 8-0:1.0: USB hub found > [ 6.093414] hub 8-0:1.0: 2 ports detected > [ 6.093415] hub 8-0:1.0: standalone hub > [ 6.093416] hub 8-0:1.0: no power switching (usb 1.0) > [ 6.093417] hub 8-0:1.0: individual port over-current protection > [ 6.093418] hub 8-0:1.0: power on to power good time: 2ms > [ 6.093421] hub 8-0:1.0: local power source is good > [ 6.093422] hub 8-0:1.0: trying to enable port power on non-switchable hub > [ 6.143524] usb 5-2: usb_probe_device > [ 6.143526] usb 5-2: configuration #1 chosen from 1 choice > [ 6.194008] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00 > [ 6.204010] usb usb3: suspend_rh (auto-stop) > [ 6.204066] usb 5-2: adding 5-2:1.0 (config #1, interface 0) > [ 6.204078] usb 5-2:1.0: uevent > [ 6.204195] drivers/usb/core/inode.c: creating file '002' > [ 6.204244] usb 5-2: New USB device found, idVendor=08ff, idProduct=1600 > [ 6.204246] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [ 6.204247] usb 5-2: Product: Fingerprint Sensor > [ 6.204249] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 6.204252] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 6.295040] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 6.295054] drivers/usb/core/inode.c: creating file '001' > [ 6.295110] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > [ 6.295111] usb usb8: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 6.295113] usb usb8: Product: UHCI Host Controller > [ 6.295114] usb usb8: Manufacturer: Linux 2.6.27-gentoo-r2 uhci_hcd > [ 6.295115] usb usb8: SerialNumber: 0000:00:1d.2 > [ 6.295198] usbcore: registered new interface driver usblp > [ 6.295200] Initializing USB Mass Storage driver... > [ 6.295244] usbcore: registered new interface driver usb-storage > [ 6.295246] USB Mass Storage support registered. > [ 6.295292] usbcore: registered new interface driver libusual > [ 6.295375] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [ 6.379009] i8042.c: Detected active multiplexing controller, rev 1.1. > [ 6.380360] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 6.380364] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 6.380365] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 6.380367] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 6.380368] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 6.380407] mice: PS/2 mouse device common for all mice > [ 6.454011] usb usb4: suspend_rh (auto-stop) > [ 6.727586] hub 1-0:1.0: hub_suspend > [ 6.727589] usb usb1: bus auto-suspend > [ 6.727590] ehci_hcd 0000:00:1a.7: suspend root hub > [ 6.778025] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > [ 6.801908] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 6.818563] rtc0: alarms up to one month, y3k, hpet irqs > [ 6.835361] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) > initialised: dm-devel@...hat.com > [ 6.852559] cpuidle: using governor ladder > [ 6.856252] Marking TSC unstable due to TSC halts in idle > [ 6.887258] cpuidle: using governor menu > [ 6.904526] usbcore: registered new interface driver hiddev > [ 6.921771] usbcore: registered new interface driver usbhid > [ 6.938560] usbhid: v2.6:USB HID core driver > [ 6.955689] Advanced Linux Sound Architecture Driver Version 1.0.17. > [ 6.973081] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, > low) -> IRQ 22 > [ 6.990485] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 7.000348] hda_codec: Unknown model for ALC662, trying auto-probe > from BIOS... > [ 7.026392] hda-codec: No codec parser is available > [ 7.044445] hda-codec: No codec parser is available > [ 7.089073] ALSA device list: > [ 7.105889] #0: HDA Intel at 0xf9ff8000 irq 22 > [ 7.122988] Netfilter messages via NETLINK v0.30. > [ 7.140060] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 7.157363] ctnetlink v0.93: registering with nfnetlink. > [ 7.175166] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 7.192410] TCP cubic registered > [ 7.209580] Initializing XFRM netlink socket > [ 7.227100] usb usb6: suspend_rh (auto-stop) > [ 7.227123] usb usb7: suspend_rh (auto-stop) > [ 7.227227] NET: Registered protocol family 10 > [ 7.245047] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 7.262354] IPv6 over IPv4 tunneling driver > [ 7.280015] NET: Registered protocol family 17 > [ 7.298051] RPC: Registered udp transport module. > [ 7.314995] RPC: Registered tcp transport module. > [ 7.333858] registered taskstats version 1 > [ 7.350570] Magic number: 0:68:610 > [ 7.371959] rtc_cmos 00:03: setting system clock to 2008-11-18 > 01:39:06 UTC (1226972346) > [ 7.454162] usb usb8: suspend_rh (auto-stop) > [ 7.500142] Clocksource tsc unstable (delta = -121800701 ns) > [ 7.704202] hub 3-0:1.0: hub_suspend > [ 7.704210] usb usb3: bus auto-suspend > [ 7.704215] usb usb3: suspend_rh > [ 7.704238] hub 4-0:1.0: hub_suspend > [ 7.704243] usb usb4: bus auto-suspend > [ 7.704247] usb usb4: suspend_rh > [ 7.916795] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x280b1, > caps: 0xb04711/0x60040d > [ 8.003516] input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio4/input/input4 > [ 8.100587] md: Autodetecting RAID arrays. > [ 8.144671] md: Scanned 0 and added 0 devices. > [ 8.188667] md: autorun ... > [ 8.232000] md: ... autorun DONE. > [ 8.293513] UDF-fs: No VRS found > [ 8.370976] VFS: Mounted root (jfs filesystem) readonly. > [ 8.413811] Freeing unused kernel memory: 360k freed > [ 8.456918] Write protecting the kernel read-only data: 6212k > [ 8.550700] khelper used greatest stack depth: 4704 bytes left > [ 8.704145] hub 6-0:1.0: hub_suspend > [ 8.704153] usb usb6: bus auto-suspend > [ 8.704158] usb usb6: suspend_rh > [ 8.704182] hub 7-0:1.0: hub_suspend > [ 8.704187] usb usb7: bus auto-suspend > [ 8.704191] usb usb7: suspend_rh > [ 8.704213] hub 8-0:1.0: hub_suspend > [ 8.704219] usb usb8: bus auto-suspend > [ 8.704222] usb usb8: suspend_rh > [ 10.789507] cp used greatest stack depth: 4488 bytes left > [ 11.864380] usb usb3: uevent > [ 11.864420] usb 3-0:1.0: uevent > [ 11.864604] usb usb4: uevent > [ 11.864641] usb 4-0:1.0: uevent > [ 11.864875] usb usb5: uevent > [ 11.864917] usb 5-0:1.0: uevent > [ 11.864990] usb 5-2: uevent > [ 11.865044] usb 5-2:1.0: uevent > [ 11.865291] usb usb1: uevent > [ 11.865328] usb 1-0:1.0: uevent > [ 11.866612] usb usb6: uevent > [ 11.866649] usb 6-0:1.0: uevent > [ 11.866834] usb usb7: uevent > [ 11.866871] usb 7-0:1.0: uevent > [ 11.867074] usb usb8: uevent > [ 11.867111] usb 8-0:1.0: uevent > [ 11.867299] usb usb2: uevent > [ 11.867335] usb 2-0:1.0: uevent > [ 11.867405] usb 2-5: uevent > [ 11.867443] usb 2-5:1.0: uevent > [ 11.867515] usb 2-5:1.1: uevent > [ 12.140398] input: PC Speaker as /devices/platform/pcspkr/input/input5 > [ 12.262431] sdhci: Secure Digital Host Controller Interface driver > [ 12.262438] sdhci: Copyright(c) Pierre Ossman > [ 12.270722] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 12.270754] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 12.270793] r8169 0000:08:00.0: setting latency timer to 64 > [ 12.271544] eth0: RTL8168c/8111c at 0xffffc20000062000, > 00:22:15:37:1b:b5, XID 3c4000c0 IRQ 373 > [ 12.283806] sdhci-pci 0000:09:01.1: SDHCI controller found > [1180:0822] (rev 22) > [ 12.283818] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > [ 12.286728] Registered led device: mmc0 > [ 12.288538] mmc0: SDHCI controller on PCI [0000:09:01.1] using PIO > [ 12.329384] ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 12.383467] iwlagn: Intel(R) Wireless WiFi Link AGN driver for > Linux, 1.3.27ks > [ 12.383469] iwlagn: Copyright(c) 2003-2008 Intel Corporation > [ 12.388350] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] > MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 12.392557] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 12.392569] iwlagn 0000:03:00.0: setting latency timer to 64 > [ 12.392607] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 > [ 12.425516] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels > [ 12.426413] iwlagn 0000:03:00.0: PCI INT A disabled > [ 12.426988] phy0: Selected rate control algorithm 'iwl-agn-rs' > [ 12.464145] Linux video capture interface: v2.00 > [ 12.632134] uvcvideo 2-5:1.0: usb_probe_interface > [ 12.632142] uvcvideo 2-5:1.0: usb_probe_interface - got id > [ 12.632172] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam > (04f2:b033) > [ 12.632906] input: USB2.0 1.3M UVC WebCam as > /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6 > [ 12.638132] usb 2-5: link qh32-0001/ffff88013dcf5140 start 31 [1/0 us] > [ 12.638196] usbcore: registered new interface driver uvcvideo > [ 12.638202] USB Video Class driver (v0.1.0) > [ 13.082388] nvidia: module license 'NVIDIA' taints kernel. > [ 13.337205] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 13.337225] nvidia 0000:01:00.0: setting latency timer to 64 > [ 13.337446] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 > Wed Oct 1 14:43:46 PDT 2008 > [ 13.650787] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000006ae53] > [ 17.003302] mount used greatest stack depth: 4368 bytes left > [ 19.650434] ip used greatest stack depth: 4264 bytes left > [ 20.104395] r8169: eth0: link up > [ 20.104436] r8169: eth0: link up > [ 27.397203] Adding 4000744k swap on /dev/sda2. Priority:-1 > extents:1 across:4000744k > [ 29.949701] usb usb3: uevent > [ 29.949828] usb 3-0:1.0: uevent > [ 29.950406] usb usb4: uevent > [ 29.950525] usb 4-0:1.0: uevent > [ 29.951052] usb usb5: uevent > [ 29.951172] usb 5-0:1.0: uevent > [ 29.951387] usb 5-2: uevent > [ 29.951570] usb 5-2:1.0: uevent > [ 29.952379] usb usb1: uevent > [ 29.952502] usb 1-0:1.0: uevent > [ 29.956335] usb usb6: uevent > [ 29.956459] usb 6-0:1.0: uevent > [ 29.956988] usb usb7: uevent > [ 29.957107] usb 7-0:1.0: uevent > [ 29.957649] usb usb8: uevent > [ 29.957769] usb 8-0:1.0: uevent > [ 29.958334] usb usb2: uevent > [ 29.958499] usb 2-0:1.0: uevent > [ 29.958699] usb 2-5: uevent > [ 29.958821] usb 2-5:1.0: uevent > [ 29.959447] usb 2-5:1.1: uevent > [ 30.125010] eth0: no IPv6 routers present > [ 45.806346] CE: hpet increasing min_delta_ns to 15000 nsec > [ 2905.812299] pciehp: Card present on Slot(16) > [ 2980.507310] CE: hpet increasing min_delta_ns to 22500 nsec > [ 3883.654112] CE: hpet increasing min_delta_ns to 33750 nsec > [ 3884.391118] CE: hpet increasing min_delta_ns to 50624 nsec > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists