linux-kernel - [PATCH 12/16] Blackfin SPI Driver: get dma working for SPI flashes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1226994760-4301-13-git-send-email-cooloney@kernel.org>
Date:	Tue, 18 Nov 2008 15:52:36 +0800
From:	Bryan Wu <cooloney@...nel.org>
To:	dbrownell@...rs.sourceforge.net,
	spi-devel-general@...ts.sourceforge.net
Cc:	linux-kernel@...r.kernel.org,
	Mike Frysinger <vapier.adi@...il.com>,
	Bryan Wu <cooloney@...nel.org>
Subject: [PATCH 12/16] Blackfin SPI Driver: get dma working for SPI flashes

From: Mike Frysinger <vapier.adi@...il.com>

When using a BF533-STAMP here with a W25X10 SPI flash. It works fine when
enable_dma is disabled, but doesn't work at all when turning DMA on.
We get just 0xff bytes back when trying to read the device.

If change the code around so that it programs the SPI first and then
enables DMA, it seems to work a lot better ...

Signed-off-by: Mike Frysinger <vapier.adi@...il.com>
Signed-off-by: Bryan Wu <cooloney@...nel.org>
---
 drivers/spi/spi_bfin5xx.c |   26 ++++++++++++++++----------
 1 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index fba77c2..5cd4873 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -760,11 +760,10 @@ static void pump_transfers(unsigned long data)
 	if (!full_duplex && drv_data->cur_chip->enable_dma
 				&& drv_data->len > 6) {
 
-		unsigned long dma_start_addr;
+		unsigned long dma_start_addr, flags;
 
 		disable_dma(drv_data->dma_channel);
 		clear_dma_irqstat(drv_data->dma_channel);
-		bfin_spi_disable(drv_data);
 
 		/* config dma channel */
 		dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
@@ -795,8 +794,7 @@ static void pump_transfers(unsigned long data)
 			enable_dma(drv_data->dma_channel);
 
 			/* start SPI transfer */
-			write_CTRL(drv_data,
-				(cr | BIT_CTL_TIMOD_DMA_TX | BIT_CTL_ENABLE));
+			write_CTRL(drv_data, cr | BIT_CTL_TIMOD_DMA_TX);
 
 			/* just return here, there can only be one transfer
 			 * in this mode
@@ -838,14 +836,22 @@ static void pump_transfers(unsigned long data)
 		} else
 			BUG();
 
-		/* start dma */
-		dma_enable_irq(drv_data->dma_channel);
-		set_dma_config(drv_data->dma_channel, dma_config);
+		/* oh man, here there be monsters ... and i dont mean the
+		 * fluffy cute ones from pixar, i mean the kind that'll eat
+		 * your data, kick your dog, and love it all.  do *not* try
+		 * and change these lines unless you (1) heavily test DMA
+		 * with SPI flashes on a loaded system (e.g. ping floods),
+		 * (2) know just how broken the DMA engine interaction with
+		 * the SPI peripheral is, and (3) have someone else to blame
+		 * when you screw it all up anyways.
+		 */
 		set_dma_start_addr(drv_data->dma_channel, dma_start_addr);
+		set_dma_config(drv_data->dma_channel, dma_config);
+		local_irq_save(flags);
 		enable_dma(drv_data->dma_channel);
-
-		/* start SPI transfer */
-		write_CTRL(drv_data, (cr | BIT_CTL_ENABLE));
+		write_CTRL(drv_data, cr);
+		dma_enable_irq(drv_data->dma_channel);
+		local_irq_restore(flags);
 
 	} else {
 		/* IO mode write then read */
-- 
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/