From: Jan Glauber - Use automatic acknowledgement of incoming buffers in QEBSM mode - Move ACK for non-QEBSM mode always to the newest buffer to prevent a race with qdio_stop_polling - Remove the polling spinlock, the upper layer drivers return new buffers in the same code path and could not run in parallel - Don't flood the error log in case of no-target-buffer-empty - In handle_inbound we check if we would overwrite an ACK'ed buffer, if so advance the pointer to the oldest ACK'ed buffer so we don't overwrite an empty buffer in qdio_stop_polling Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio.h | 19 ++-- drivers/s390/cio/qdio_debug.c | 7 + drivers/s390/cio/qdio_main.c | 181 ++++++++++++++++++++++++++-------------- drivers/s390/cio/qdio_perf.c | 2 drivers/s390/cio/qdio_perf.h | 1 drivers/s390/cio/qdio_setup.c | 1 drivers/s390/cio/qdio_thinint.c | 2 7 files changed, 139 insertions(+), 74 deletions(-) Index: quilt-2.6/drivers/s390/cio/qdio_debug.c =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_debug.c +++ quilt-2.6/drivers/s390/cio/qdio_debug.c @@ -60,16 +60,18 @@ static int qstat_show(struct seq_file *m if (!q) return 0; - seq_printf(m, "device state indicator: %d\n", *q->irq_ptr->dsci); + seq_printf(m, "device state indicator: %d\n", *(u32 *)q->irq_ptr->dsci); seq_printf(m, "nr_used: %d\n", atomic_read(&q->nr_buf_used)); seq_printf(m, "ftc: %d\n", q->first_to_check); seq_printf(m, "last_move_ftc: %d\n", q->last_move_ftc); seq_printf(m, "polling: %d\n", q->u.in.polling); + seq_printf(m, "ack count: %d\n", q->u.in.ack_count); seq_printf(m, "slsb buffer states:\n"); + seq_printf(m, "|0 |8 |16 |24 |32 |40 |48 |56 63|\n"); qdio_siga_sync_q(q); for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; i++) { - get_buf_state(q, i, &state); + get_buf_state(q, i, &state, 0); switch (state) { case SLSB_P_INPUT_NOT_INIT: case SLSB_P_OUTPUT_NOT_INIT: @@ -101,6 +103,7 @@ static int qstat_show(struct seq_file *m seq_printf(m, "\n"); } seq_printf(m, "\n"); + seq_printf(m, "|64 |72 |80 |88 |96 |104 |112 | 127|\n"); return 0; } Index: quilt-2.6/drivers/s390/cio/qdio.h =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio.h +++ quilt-2.6/drivers/s390/cio/qdio.h @@ -112,12 +112,12 @@ static inline int do_sqbs(u64 token, uns } static inline int do_eqbs(u64 token, unsigned char *state, int queue, - int *start, int *count) + int *start, int *count, int ack) { register unsigned long _ccq asm ("0") = *count; register unsigned long _token asm ("1") = token; unsigned long _queuestart = ((unsigned long)queue << 32) | *start; - unsigned long _state = 0; + unsigned long _state = (unsigned long)ack << 63; asm volatile( " .insn rrf,0xB99c0000,%1,%2,0,0" @@ -134,7 +134,7 @@ static inline int do_eqbs(u64 token, uns static inline int do_sqbs(u64 token, unsigned char state, int queue, int *start, int *count) { return 0; } static inline int do_eqbs(u64 token, unsigned char *state, int queue, - int *start, int *count) { return 0; } + int *start, int *count, int ack) { return 0; } #endif /* CONFIG_64BIT */ struct qdio_irq; @@ -187,11 +187,11 @@ struct qdio_input_q { /* input buffer acknowledgement flag */ int polling; + /* how much sbals are acknowledged with qebsm */ + int ack_count; + /* last time of noticing incoming data */ u64 timestamp; - - /* lock for clearing the acknowledgement */ - spinlock_t lock; }; struct qdio_output_q { @@ -351,10 +351,13 @@ static inline unsigned long long get_use ((bufnr + 1) & QDIO_MAX_BUFFERS_MASK) #define add_buf(bufnr, inc) \ ((bufnr + inc) & QDIO_MAX_BUFFERS_MASK) +#define sub_buf(bufnr, dec) \ + ((bufnr - dec) & QDIO_MAX_BUFFERS_MASK) /* prototypes for thin interrupt */ void qdio_sync_after_thinint(struct qdio_q *q); -int get_buf_state(struct qdio_q *q, unsigned int bufnr, unsigned char *state); +int get_buf_state(struct qdio_q *q, unsigned int bufnr, unsigned char *state, + int auto_ack); void qdio_check_outbound_after_thinint(struct qdio_q *q); int qdio_inbound_q_moved(struct qdio_q *q); void qdio_kick_inbound_handler(struct qdio_q *q); @@ -388,6 +391,8 @@ int qdio_setup_irq(struct qdio_initializ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr, struct ccw_device *cdev); void qdio_release_memory(struct qdio_irq *irq_ptr); +int qdio_setup_create_sysfs(struct ccw_device *cdev); +void qdio_setup_destroy_sysfs(struct ccw_device *cdev); int qdio_setup_init(void); void qdio_setup_exit(void); Index: quilt-2.6/drivers/s390/cio/qdio_main.c =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_main.c +++ quilt-2.6/drivers/s390/cio/qdio_main.c @@ -112,12 +112,13 @@ static inline int qdio_check_ccq(struct * @state: state of the extracted buffers * @start: buffer number to start at * @count: count of buffers to examine + * @auto_ack: automatically acknowledge buffers * * Returns the number of successfull extracted equal buffer states. * Stops processing if a state is different from the last buffers state. */ static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, - int start, int count) + int start, int count, int auto_ack) { unsigned int ccq = 0; int tmp_count = count, tmp_start = start; @@ -130,7 +131,8 @@ static int qdio_do_eqbs(struct qdio_q *q if (!q->is_input_q) nr += q->irq_ptr->nr_input_qs; again: - ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); + ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count, + auto_ack); rc = qdio_check_ccq(q, ccq); /* At least one buffer was processed, return and extract the remaining @@ -176,6 +178,9 @@ static int qdio_do_sqbs(struct qdio_q *q int nr = q->nr; int rc; + if (!count) + return 0; + BUG_ON(!q->irq_ptr->sch_token); qdio_perf_stat_inc(&perf_stats.debug_sqbs_all); @@ -203,7 +208,8 @@ again: /* returns number of examined buffers and their common state in *state */ static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, - unsigned char *state, unsigned int count) + unsigned char *state, unsigned int count, + int auto_ack) { unsigned char __state = 0; int i; @@ -212,7 +218,7 @@ static inline int get_buf_states(struct BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); if (is_qebsm(q)) - return qdio_do_eqbs(q, state, bufnr, count); + return qdio_do_eqbs(q, state, bufnr, count, auto_ack); for (i = 0; i < count; i++) { if (!__state) @@ -226,9 +232,9 @@ static inline int get_buf_states(struct } inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, - unsigned char *state) + unsigned char *state, int auto_ack) { - return get_buf_states(q, bufnr, state, 1); + return get_buf_states(q, bufnr, state, 1, auto_ack); } /* wrap-around safe setting of slsb states, returns number of changed buffers */ @@ -376,29 +382,91 @@ void qdio_sync_after_thinint(struct qdio inline void qdio_stop_polling(struct qdio_q *q) { - spin_lock_bh(&q->u.in.lock); - if (!q->u.in.polling) { - spin_unlock_bh(&q->u.in.lock); + if (!q->u.in.polling) return; - } + q->u.in.polling = 0; qdio_perf_stat_inc(&perf_stats.debug_stop_polling); /* show the card that we are not polling anymore */ - set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); - spin_unlock_bh(&q->u.in.lock); + if (is_qebsm(q)) { + set_buf_states(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT, + q->u.in.ack_count); + q->u.in.ack_count = 0; + } else + set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); } -static void announce_buffer_error(struct qdio_q *q) +static void announce_buffer_error(struct qdio_q *q, int count) { + q->qdio_error = QDIO_ERROR_SLSB_STATE; + + /* special handling for no target buffer empty */ + if ((!q->is_input_q && + (q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) { + qdio_perf_stat_inc(&perf_stats.outbound_target_full); + DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%3d", + q->first_to_check); + return; + } + DBF_ERROR("%4x BUF ERROR", SCH_NO(q)); DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr); - DBF_ERROR("FTC:%3d", q->first_to_check); + DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count); DBF_ERROR("F14:%2x F15:%2x", q->sbal[q->first_to_check]->element[14].flags & 0xff, q->sbal[q->first_to_check]->element[15].flags & 0xff); +} - q->qdio_error = QDIO_ERROR_SLSB_STATE; +static inline void inbound_primed(struct qdio_q *q, int count) +{ + int new; + + DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim: %3d", count); + + /* for QEBSM the ACK was already set by EQBS */ + if (is_qebsm(q)) { + if (!q->u.in.polling) { + q->u.in.polling = 1; + q->u.in.ack_count = count; + q->last_move_ftc = q->first_to_check; + return; + } + + /* delete the previous ACK's */ + set_buf_states(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT, + q->u.in.ack_count); + q->u.in.ack_count = count; + q->last_move_ftc = q->first_to_check; + return; + } + + /* + * ACK the newest buffer. The ACK will be removed in qdio_stop_polling + * or by the next inbound run. + */ + new = add_buf(q->first_to_check, count - 1); + if (q->u.in.polling) { + /* reset the previous ACK but first set the new one */ + set_buf_state(q, new, SLSB_P_INPUT_ACK); + set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); + } + else { + q->u.in.polling = 1; + set_buf_state(q, q->first_to_check, SLSB_P_INPUT_ACK); + } + + q->last_move_ftc = new; + count--; + if (!count) + return; + + /* + * Need to change all PRIMED buffers to NOT_INIT, otherwise + * we're loosing initiative in the thinint code. + */ + set_buf_states(q, next_buf(q->first_to_check), SLSB_P_INPUT_NOT_INIT, + count); } static int get_inbound_buffer_frontier(struct qdio_q *q) @@ -407,13 +475,6 @@ static int get_inbound_buffer_frontier(s unsigned char state; /* - * If we still poll don't update last_move_ftc, keep the - * previously ACK buffer there. - */ - if (!q->u.in.polling) - q->last_move_ftc = q->first_to_check; - - /* * Don't check 128 buffers, as otherwise qdio_inbound_q_moved * would return 0. */ @@ -433,34 +494,13 @@ check_next: if (q->first_to_check == stop) goto out; - count = get_buf_states(q, q->first_to_check, &state, count); + count = get_buf_states(q, q->first_to_check, &state, count, 1); if (!count) goto out; switch (state) { case SLSB_P_INPUT_PRIMED: - DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim: %3d", count); - - /* - * Only ACK the first buffer. The ACK will be removed in - * qdio_stop_polling. - */ - if (q->u.in.polling) - state = SLSB_P_INPUT_NOT_INIT; - else { - q->u.in.polling = 1; - state = SLSB_P_INPUT_ACK; - } - set_buf_state(q, q->first_to_check, state); - - /* - * Need to change all PRIMED buffers to NOT_INIT, otherwise - * we're loosing initiative in the thinint code. - */ - if (count > 1) - set_buf_states(q, next_buf(q->first_to_check), - SLSB_P_INPUT_NOT_INIT, count - 1); - + inbound_primed(q, count); /* * No siga-sync needed for non-qebsm here, as the inbound queue * will be synced on the next siga-r, resp. @@ -470,7 +510,7 @@ check_next: atomic_sub(count, &q->nr_buf_used); goto check_next; case SLSB_P_INPUT_ERROR: - announce_buffer_error(q); + announce_buffer_error(q, count); /* process the buffer, the upper layer will take care of it */ q->first_to_check = add_buf(q->first_to_check, count); atomic_sub(count, &q->nr_buf_used); @@ -519,7 +559,7 @@ static int qdio_inbound_q_done(struct qd */ qdio_siga_sync_q(q); - get_buf_state(q, q->first_to_check, &state); + get_buf_state(q, q->first_to_check, &state, 0); if (state == SLSB_P_INPUT_PRIMED) /* we got something to do */ return 0; @@ -622,7 +662,7 @@ check_next: if (q->first_to_check == stop) return q->first_to_check; - count = get_buf_states(q, q->first_to_check, &state, count); + count = get_buf_states(q, q->first_to_check, &state, count, 0); if (!count) return q->first_to_check; @@ -641,7 +681,7 @@ check_next: break; goto check_next; case SLSB_P_OUTPUT_ERROR: - announce_buffer_error(q); + announce_buffer_error(q, count); /* process the buffer, the upper layer will take care of it */ q->first_to_check = add_buf(q->first_to_check, count); atomic_sub(count, &q->nr_buf_used); @@ -1457,23 +1497,38 @@ static inline int buf_in_between(int buf static void handle_inbound(struct qdio_q *q, unsigned int callflags, int bufnr, int count) { - unsigned long flags; - int used, rc; + int used, rc, diff; - /* - * do_QDIO could run in parallel with the queue tasklet so the - * upper-layer programm could empty the ACK'ed buffer here. - * If that happens we must clear the polling flag, otherwise - * qdio_stop_polling() could set the buffer to NOT_INIT after - * it was set to EMPTY which would kill us. - */ - spin_lock_irqsave(&q->u.in.lock, flags); - if (q->u.in.polling) - if (buf_in_between(q->last_move_ftc, bufnr, count)) + if (!q->u.in.polling) + goto set; + + /* protect against stop polling setting an ACK for an emptied slsb */ + if (count == QDIO_MAX_BUFFERS_PER_Q) { + /* overwriting everything, just delete polling status */ + q->u.in.polling = 0; + q->u.in.ack_count = 0; + goto set; + } else if (buf_in_between(q->last_move_ftc, bufnr, count)) { + if (is_qebsm(q)) { + /* partial overwrite, just update last_move_ftc */ + diff = add_buf(bufnr, count); + diff = sub_buf(diff, q->last_move_ftc); + q->u.in.ack_count -= diff; + if (q->u.in.ack_count <= 0) { + q->u.in.polling = 0; + q->u.in.ack_count = 0; + /* TODO: must we set last_move_ftc to something meaningful? */ + goto set; + } + q->last_move_ftc = add_buf(q->last_move_ftc, diff); + } + else + /* the only ACK will be deleted, so stop polling */ q->u.in.polling = 0; + } +set: count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); - spin_unlock_irqrestore(&q->u.in.lock, flags); used = atomic_add_return(count, &q->nr_buf_used) - count; BUG_ON(used + count > QDIO_MAX_BUFFERS_PER_Q); @@ -1541,7 +1596,7 @@ static void handle_outbound(struct qdio_ } /* try to fast requeue buffers */ - get_buf_state(q, prev_buf(bufnr), &state); + get_buf_state(q, prev_buf(bufnr), &state, 0); if (state != SLSB_CU_OUTPUT_PRIMED) qdio_kick_outbound_q(q); else { Index: quilt-2.6/drivers/s390/cio/qdio_perf.c =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_perf.c +++ quilt-2.6/drivers/s390/cio/qdio_perf.c @@ -74,6 +74,8 @@ static int qdio_perf_proc_show(struct se seq_printf(m, "\n"); seq_printf(m, "Number of fast requeues (outg. SBAL w/o SIGA)\t: %li\n", (long)atomic_long_read(&perf_stats.fast_requeue)); + seq_printf(m, "Number of outbound target full condition\t: %li\n", + (long)atomic_long_read(&perf_stats.outbound_target_full)); seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n", (long)atomic_long_read(&perf_stats.debug_tl_out_timer)); seq_printf(m, "Number of stop polling calls\t\t\t: %li\n", Index: quilt-2.6/drivers/s390/cio/qdio_perf.h =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_perf.h +++ quilt-2.6/drivers/s390/cio/qdio_perf.h @@ -36,6 +36,7 @@ struct qdio_perf_stats { atomic_long_t inbound_handler; atomic_long_t outbound_handler; atomic_long_t fast_requeue; + atomic_long_t outbound_target_full; /* for debugging */ atomic_long_t debug_tl_out_timer; Index: quilt-2.6/drivers/s390/cio/qdio_setup.c =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_setup.c +++ quilt-2.6/drivers/s390/cio/qdio_setup.c @@ -167,7 +167,6 @@ static void setup_queues(struct qdio_irq setup_queues_misc(q, irq_ptr, qdio_init->input_handler, i); q->is_input_q = 1; - spin_lock_init(&q->u.in.lock); setup_storage_lists(q, irq_ptr, input_sbal_array, i); input_sbal_array += QDIO_MAX_BUFFERS_PER_Q; Index: quilt-2.6/drivers/s390/cio/qdio_thinint.c =================================================================== --- quilt-2.6.orig/drivers/s390/cio/qdio_thinint.c +++ quilt-2.6/drivers/s390/cio/qdio_thinint.c @@ -131,7 +131,7 @@ static inline int tiqdio_inbound_q_done( return 1; qdio_siga_sync_q(q); - get_buf_state(q, q->first_to_check, &state); + get_buf_state(q, q->first_to_check, &state, 0); if (state == SLSB_P_INPUT_PRIMED) /* more work coming */ -- blue skies, Martin. "Reality continues to ruin my life." - Calvin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/