From: Carsten Otte This is a cleanup of all the messages this driver prints. It uses the dev_message macros now. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape.h | 2 drivers/s390/char/tape_34xx.c | 155 +++++++---------- drivers/s390/char/tape_3590.c | 360 +++++++++++++++++++---------------------- drivers/s390/char/tape_block.c | 17 - drivers/s390/char/tape_char.c | 7 drivers/s390/char/tape_core.c | 60 ------ drivers/s390/char/tape_proc.c | 3 drivers/s390/char/tape_std.c | 21 -- 8 files changed, 254 insertions(+), 371 deletions(-) Index: quilt-2.6/drivers/s390/char/tape_34xx.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_34xx.c +++ quilt-2.6/drivers/s390/char/tape_34xx.c @@ -8,6 +8,8 @@ * Martin Schwidefsky */ +#define KMSG_COMPONENT "tape" + #include #include #include @@ -18,8 +20,6 @@ #include "tape.h" #include "tape_std.h" -#define PRINTK_HEADER "TAPE_34XX: " - /* * Pointer to debug area. */ @@ -203,8 +203,7 @@ tape_34xx_unsolicited_irq(struct tape_de tape_34xx_schedule_work(device, TO_MSEN); } else { DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); - PRINT_WARN("Unsolicited IRQ (Device End) caught.\n"); - tape_dump_sense(device, NULL, irb); + tape_dump_sense_dbf(device, NULL, irb); } return TAPE_IO_SUCCESS; } @@ -226,9 +225,7 @@ tape_34xx_erp_read_opposite(struct tape_ tape_std_read_backward(device, request); return tape_34xx_erp_retry(request); } - if (request->op != TO_RBA) - PRINT_ERR("read_opposite called with state:%s\n", - tape_op_verbose[request->op]); + /* * We tried to read forward and backward, but hat no * success -> failed. @@ -241,13 +238,10 @@ tape_34xx_erp_bug(struct tape_device *de struct irb *irb, int no) { if (request->op != TO_ASSIGN) { - PRINT_WARN("An unexpected condition #%d was caught in " - "tape error recovery.\n", no); - PRINT_WARN("Please report this incident.\n"); - if (request) - PRINT_WARN("Operation of tape:%s\n", - tape_op_verbose[request->op]); - tape_dump_sense(device, request, irb); + dev_err(&device->cdev->dev, "An unexpected condition %d was " + "caught in tape error recovery. Please report this " + "incident", no); + tape_dump_sense_dbf(device, request, irb); } return tape_34xx_erp_failed(request, -EIO); } @@ -261,9 +255,9 @@ tape_34xx_erp_overrun(struct tape_device struct irb *irb) { if (irb->ecw[3] == 0x40) { - PRINT_WARN ("Data overrun error between control-unit " - "and drive. Use a faster channel connection, " - "if possible! \n"); + dev_warn (&device->cdev->dev, "Data overrun error between " + "control-unit and drive. Use a faster channel " + "connection, if possible!"); return tape_34xx_erp_failed(request, -EIO); } return tape_34xx_erp_bug(device, request, irb, -1); @@ -280,7 +274,8 @@ tape_34xx_erp_sequence(struct tape_devic /* * cu detected incorrect block-id sequence on tape. */ - PRINT_WARN("Illegal block-id sequence found!\n"); + dev_warn (&device->cdev->dev, "Illegal block-id sequence " + "found!"); return tape_34xx_erp_failed(request, -EIO); } /* @@ -393,8 +388,6 @@ tape_34xx_unit_check(struct tape_device /* Writing at physical end of volume */ return tape_34xx_erp_failed(request, -ENOSPC); default: - PRINT_ERR("Invalid op in %s:%i\n", - __func__, __LINE__); return tape_34xx_erp_failed(request, 0); } } @@ -420,7 +413,7 @@ tape_34xx_unit_check(struct tape_device irb, -4); /* data check is permanent, CU recovery has failed */ - PRINT_WARN("Permanent read error\n"); + dev_warn (&device->cdev->dev, "Permanent read error"); return tape_34xx_erp_failed(request, -EIO); case 0x25: // a write data check occurred @@ -433,22 +426,25 @@ tape_34xx_unit_check(struct tape_device irb, -5); // data check is permanent, cu-recovery has failed - PRINT_WARN("Permanent write error\n"); + dev_warn (&device->cdev->dev, "Permanent write error"); return tape_34xx_erp_failed(request, -EIO); case 0x26: /* Data Check (read opposite) occurred. */ return tape_34xx_erp_read_opposite(device, request); case 0x28: /* ID-Mark at tape start couldn't be written */ - PRINT_WARN("ID-Mark could not be written.\n"); + dev_warn (&device->cdev->dev, "ID-Mark could not be " + "written."); return tape_34xx_erp_failed(request, -EIO); case 0x31: /* Tape void. Tried to read beyond end of device. */ - PRINT_WARN("Read beyond end of recorded area.\n"); + dev_warn (&device->cdev->dev, "Read beyond end of " + "recorded area."); return tape_34xx_erp_failed(request, -ENOSPC); case 0x41: /* Record sequence error. */ - PRINT_WARN("Invalid block-id sequence found.\n"); + dev_warn (&device->cdev->dev, "Invalid block-id " + "sequence found."); return tape_34xx_erp_failed(request, -EIO); default: /* all data checks for 3480 should result in one of @@ -470,16 +466,12 @@ tape_34xx_unit_check(struct tape_device switch (sense[3]) { case 0x00: /* Unit check with erpa code 0. Report and ignore. */ - PRINT_WARN("Non-error sense was found. " - "Unit-check will be ignored.\n"); return TAPE_IO_SUCCESS; case 0x21: /* * Data streaming not operational. CU will switch to * interlock mode. Reissue the command. */ - PRINT_WARN("Data streaming not operational. " - "Switching to interlock-mode.\n"); return tape_34xx_erp_retry(request); case 0x22: /* @@ -487,11 +479,7 @@ tape_34xx_unit_check(struct tape_device * error on the lower interface, internal path not usable, * or error during cartridge load. */ - PRINT_WARN("A path equipment check occurred. One of the " - "following conditions occurred:\n"); - PRINT_WARN("drive adapter error, buffer error on the lower " - "interface, internal path not usable, error " - "during cartridge load.\n"); + dev_warn (&device->cdev->dev, "path equipment check occurred."); return tape_34xx_erp_failed(request, -EIO); case 0x24: /* @@ -514,7 +502,6 @@ tape_34xx_unit_check(struct tape_device * but the hardware isn't capable to do idrc, or a perform * subsystem func is issued and the CU is not on-line. */ - PRINT_WARN ("Function incompatible. Try to switch off idrc\n"); return tape_34xx_erp_failed(request, -EIO); case 0x2a: /* @@ -552,23 +539,24 @@ tape_34xx_unit_check(struct tape_device * reading the format id mark or that that format specified * is not supported by the drive. */ - PRINT_WARN("Drive not capable processing the tape format!\n"); + dev_warn (&device->cdev->dev, "Drive not capable processing " + "the tape format!"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); case 0x30: /* The medium is write protected. */ - PRINT_WARN("Medium is write protected!\n"); + dev_warn (&device->cdev->dev, "Medium is write protected!"); return tape_34xx_erp_failed(request, -EACCES); case 0x32: // Tension loss. We cannot recover this, it's an I/O error. - PRINT_WARN("The drive lost tape tension.\n"); + dev_warn (&device->cdev->dev, "The drive lost tape tension."); return tape_34xx_erp_failed(request, -EIO); case 0x33: /* * Load Failure. The cartridge was not inserted correctly or * the tape is not threaded correctly. */ - PRINT_WARN("Cartridge load failure. Reload the cartridge " - "and try again.\n"); + dev_warn (&device->cdev->dev, "Cartridge load failure. Reload " + "the cartridge and try again."); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x34: @@ -576,8 +564,8 @@ tape_34xx_unit_check(struct tape_device * Unload failure. The drive cannot maintain tape tension * and control tape movement during an unload operation. */ - PRINT_WARN("Failure during cartridge unload. " - "Please try manually.\n"); + dev_warn (&device->cdev->dev, "Failure during cartridge " + "unload, try manually."); if (request->op == TO_RUN) return tape_34xx_erp_failed(request, -EIO); return tape_34xx_erp_bug(device, request, irb, sense[3]); @@ -589,8 +577,8 @@ tape_34xx_unit_check(struct tape_device * - the cartridge loader does not respond correctly * - a failure occurs during an index, load, or unload cycle */ - PRINT_WARN("Equipment check! Please check the drive and " - "the cartridge loader.\n"); + dev_warn (&device->cdev->dev, "Equipment check! Please check " + "the drive and the cartridge loader."); return tape_34xx_erp_failed(request, -EIO); case 0x36: if (device->cdev->id.driver_info == tape_3490) @@ -603,7 +591,7 @@ tape_34xx_unit_check(struct tape_device * Tape length error. The tape is shorter than reported in * the beginning-of-tape data. */ - PRINT_WARN("Tape length error.\n"); + dev_warn (&device->cdev->dev, "Tape length error."); return tape_34xx_erp_failed(request, -EIO); case 0x38: /* @@ -620,12 +608,14 @@ tape_34xx_unit_check(struct tape_device return tape_34xx_erp_failed(request, -EIO); case 0x3a: /* Drive switched to not ready. */ - PRINT_WARN("Drive not ready. Turn the ready/not ready switch " - "to ready position and try again.\n"); + dev_warn (&device->cdev->dev, "Drive not ready. Turn the " + "ready/not ready switch to ready position and try " + "again."); return tape_34xx_erp_failed(request, -EIO); case 0x3b: /* Manual rewind or unload. This causes an I/O error. */ - PRINT_WARN("Medium was rewound or unloaded manually.\n"); + dev_warn (&device->cdev->dev, "Medium was rewound or unloaded" + " manually."); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x42: @@ -633,7 +623,8 @@ tape_34xx_unit_check(struct tape_device * Degraded mode. A condition that can cause degraded * performance is detected. */ - PRINT_WARN("Subsystem is running in degraded mode.\n"); + dev_warn (&device->cdev->dev, "Subsystem is running in " + "degraded mode."); return tape_34xx_erp_retry(request); case 0x43: /* Drive not ready. */ @@ -652,7 +643,6 @@ tape_34xx_unit_check(struct tape_device break; } } - PRINT_WARN("The drive is not ready.\n"); return tape_34xx_erp_failed(request, -ENOMEDIUM); case 0x44: /* Locate Block unsuccessful. */ @@ -663,7 +653,8 @@ tape_34xx_unit_check(struct tape_device return tape_34xx_erp_failed(request, -EIO); case 0x45: /* The drive is assigned to a different channel path. */ - PRINT_WARN("The drive is assigned elsewhere.\n"); + dev_warn (&device->cdev->dev, "The drive is assigned " + "elsewhere."); return tape_34xx_erp_failed(request, -EIO); case 0x46: /* @@ -671,11 +662,12 @@ tape_34xx_unit_check(struct tape_device * the power supply may be switched off or * the drive address may not be set correctly. */ - PRINT_WARN("The drive is not on-line."); + dev_warn (&device->cdev->dev, "The drive is not on-line."); return tape_34xx_erp_failed(request, -EIO); case 0x47: /* Volume fenced. CU reports volume integrity is lost. */ - PRINT_WARN("Volume fenced. The volume integrity is lost.\n"); + dev_warn (&device->cdev->dev, "Volume fenced. The volume " + "integrity is lost."); tape_34xx_delete_sbid_from(device, 0); return tape_34xx_erp_failed(request, -EIO); case 0x48: @@ -683,20 +675,21 @@ tape_34xx_unit_check(struct tape_device return tape_34xx_erp_retry(request); case 0x49: /* Bus out check. A parity check error on the bus was found. */ - PRINT_WARN("Bus out check. A data transfer over the bus " - "has been corrupted.\n"); + dev_warn (&device->cdev->dev, "Bus out check. A data transfer" + "over the bus has been corrupted."); return tape_34xx_erp_failed(request, -EIO); case 0x4a: /* Control unit erp failed. */ - PRINT_WARN("The control unit I/O error recovery failed.\n"); + dev_warn (&device->cdev->dev, "The control unit I/O error " + "recovery failed."); return tape_34xx_erp_failed(request, -EIO); case 0x4b: /* * CU and drive incompatible. The drive requests micro-program * patches, which are not available on the CU. */ - PRINT_WARN("The drive needs microprogram patches from the " - "control unit, which are not available.\n"); + dev_warn (&device->cdev->dev, "The drive needs microprogram " + "patches from the control unit, which are not available."); return tape_34xx_erp_failed(request, -EIO); case 0x4c: /* @@ -721,8 +714,8 @@ tape_34xx_unit_check(struct tape_device * the block to be written is larger than allowed for * buffered mode. */ - PRINT_WARN("Maximum block size for buffered " - "mode exceeded.\n"); + dev_warn (&device->cdev->dev, "Maximum block size for" + " buffered mode exceeded."); return tape_34xx_erp_failed(request, -ENOBUFS); } /* This erpa is reserved for 3480. */ @@ -759,22 +752,20 @@ tape_34xx_unit_check(struct tape_device return tape_34xx_erp_retry(request); case 0x55: /* Channel interface recovery (permanent). */ - PRINT_WARN("A permanent channel interface error occurred.\n"); + dev_warn (&device->cdev->dev, "A permanent channel interface " + "error occurred."); return tape_34xx_erp_failed(request, -EIO); case 0x56: /* Channel protocol error. */ - PRINT_WARN("A channel protocol error occurred.\n"); + dev_warn (&device->cdev->dev, "A channel protocol error " + "occurred."); return tape_34xx_erp_failed(request, -EIO); case 0x57: if (device->cdev->id.driver_info == tape_3480) { /* Attention intercept. */ - PRINT_WARN("An attention intercept occurred, " - "which will be recovered.\n"); return tape_34xx_erp_retry(request); } else { /* Global status intercept. */ - PRINT_WARN("An global status intercept was received, " - "which will be recovered.\n"); return tape_34xx_erp_retry(request); } case 0x5a: @@ -782,42 +773,27 @@ tape_34xx_unit_check(struct tape_device * Tape length incompatible. The tape inserted is too long, * which could cause damage to the tape or the drive. */ - PRINT_WARN("Tape Length Incompatible\n"); - PRINT_WARN("Tape length exceeds IBM enhanced capacity " - "cartdridge length or a medium\n"); - PRINT_WARN("with EC-CST identification mark has been mounted " - "in a device that writes\n"); - PRINT_WARN("3480 or 3480 XF format.\n"); + dev_warn (&device->cdev->dev, "Tape Length Incompatible"); return tape_34xx_erp_failed(request, -EIO); case 0x5b: /* Format 3480 XF incompatible */ if (sense[1] & SENSE_BEGINNING_OF_TAPE) /* The tape will get overwritten. */ return tape_34xx_erp_retry(request); - PRINT_WARN("Format 3480 XF Incompatible\n"); - PRINT_WARN("Medium has been created in 3480 format. " - "To change the format writes\n"); - PRINT_WARN("must be issued at BOT.\n"); + dev_warn (&device->cdev->dev, "Format 3480 XF Incompatible"); return tape_34xx_erp_failed(request, -EIO); case 0x5c: /* Format 3480-2 XF incompatible */ - PRINT_WARN("Format 3480-2 XF Incompatible\n"); - PRINT_WARN("Device can only read 3480 or 3480 XF format.\n"); + dev_warn (&device->cdev->dev, "Format 3480-2 XF Incompatible"); return tape_34xx_erp_failed(request, -EIO); case 0x5d: /* Tape length violation. */ - PRINT_WARN("Tape Length Violation\n"); - PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity " - "Cartdridge System Tape length.\n"); - PRINT_WARN("This may cause damage to the drive or tape when " - "processing to the EOV\n"); + dev_warn (&device->cdev->dev, "Tape Length Violation"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); case 0x5e: /* Compaction algorithm incompatible. */ - PRINT_WARN("Compaction Algorithm Incompatible\n"); - PRINT_WARN("The volume is recorded using an incompatible " - "compaction algorithm,\n"); - PRINT_WARN("which is not supported by the device.\n"); + dev_warn (&device->cdev->dev, "Compaction Algorithm " + "Incompatible"); return tape_34xx_erp_failed(request, -EMEDIUMTYPE); /* The following erpas should have been covered earlier. */ @@ -848,7 +824,6 @@ tape_34xx_irq(struct tape_device *device (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) && (request->op == TO_WRI)) { /* Write at end of volume */ - PRINT_INFO("End of volume\n"); /* XXX */ return tape_34xx_erp_failed(request, -ENOSPC); } @@ -869,9 +844,7 @@ tape_34xx_irq(struct tape_device *device } DBF_EVENT(6, "xunknownirq\n"); - PRINT_ERR("Unexpected interrupt.\n"); - PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]); - tape_dump_sense(device, request, irb); + tape_dump_sense_dbf(device, request, irb); return TAPE_IO_STOP; } Index: quilt-2.6/drivers/s390/char/tape_3590.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_3590.c +++ quilt-2.6/drivers/s390/char/tape_3590.c @@ -8,12 +8,15 @@ * Martin Schwidefsky */ +#define KMSG_COMPONENT "tape" + #include #include #include #include #define TAPE_DBF_AREA tape_3590_dbf +#define BUFSIZE 512 /* size of buffers for dynamic generated messages */ #include "tape.h" #include "tape_std.h" @@ -36,7 +39,7 @@ EXPORT_SYMBOL(TAPE_DBF_AREA); * - Read Alternate: implemented *******************************************************************/ -#define PRINTK_HEADER "TAPE_3590: " +#define KMSG_COMPONENT "tape" static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = { [0x00] = "", @@ -726,7 +729,7 @@ static void tape_3590_med_state_set(stru } c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK; if (sense->flags & MSENSE_CRYPT_MASK) { - PRINT_INFO("Medium is encrypted (%04x)\n", sense->flags); + DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags); c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK; } else { DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags); @@ -847,8 +850,7 @@ tape_3590_unsolicited_irq(struct tape_de tape_3590_schedule_work(device, TO_READ_ATTMSG); } else { DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); - PRINT_WARN("Unsolicited IRQ (Device End) caught.\n"); - tape_dump_sense(device, NULL, irb); + tape_dump_sense_dbf(device, NULL, irb); } /* check medium state */ tape_3590_schedule_work(device, TO_MSEN); @@ -876,8 +878,6 @@ tape_3590_erp_basic(struct tape_device * case SENSE_BRA_DRE: return tape_3590_erp_failed(device, request, irb, rc); default: - PRINT_ERR("Unknown BRA %x - This should not happen!\n", - sense->bra); BUG(); return TAPE_IO_STOP; } @@ -910,7 +910,7 @@ tape_3590_erp_swap(struct tape_device *d * should proceed with the new tape... this * should probably be done in user space! */ - PRINT_WARN("(%s): Swap Tape Device!\n", dev_name(&device->cdev->dev)); + dev_warn (&device->cdev->dev, "Swap Tape Device!"); return tape_3590_erp_basic(device, request, irb, -EIO); } @@ -985,8 +985,6 @@ tape_3590_erp_read_opposite(struct tape_ return tape_3590_erp_failed(device, request, irb, -EIO); break; default: - PRINT_WARN("read_opposite_recovery_called_with_op: %s\n", - tape_op_verbose[request->op]); return tape_3590_erp_failed(device, request, irb, -EIO); } } @@ -998,50 +996,61 @@ static void tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb) { struct tape_3590_sense *sense; + char *exception, *service; + + exception = kmalloc(BUFSIZE, GFP_ATOMIC); + service = kmalloc(BUFSIZE, GFP_ATOMIC); + + if (!exception || !service) + goto out_nomem; sense = (struct tape_3590_sense *) irb->ecw; /* Exception Message */ switch (sense->fmt.f70.emc) { case 0x02: - PRINT_WARN("(%s): Data degraded\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "Data degraded"); break; case 0x03: - PRINT_WARN("(%s): Data degraded in partion %i\n", - dev_name(&device->cdev->dev), sense->fmt.f70.mp); + snprintf(exception, BUFSIZE, "Data degraded in partion %i", + sense->fmt.f70.mp); break; case 0x04: - PRINT_WARN("(%s): Medium degraded\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "Medium degraded"); break; case 0x05: - PRINT_WARN("(%s): Medium degraded in partition %i\n", - dev_name(&device->cdev->dev), sense->fmt.f70.mp); + snprintf(exception, BUFSIZE, "Medium degraded in partition %i", + sense->fmt.f70.mp); break; case 0x06: - PRINT_WARN("(%s): Block 0 Error\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "Block 0 Error"); break; case 0x07: - PRINT_WARN("(%s): Medium Exception 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f70.md); + snprintf(exception, BUFSIZE, "Medium Exception 0x%02x", + sense->fmt.f70.md); break; default: - PRINT_WARN("(%s): MIM ExMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f70.emc); + snprintf(exception, BUFSIZE, "0x%02x", + sense->fmt.f70.emc); break; } /* Service Message */ switch (sense->fmt.f70.smc) { case 0x02: - PRINT_WARN("(%s): Reference Media maintenance procedure %i\n", - dev_name(&device->cdev->dev), sense->fmt.f70.md); + snprintf(service, BUFSIZE, "Reference Media maintenance " + "procedure %i", sense->fmt.f70.md); break; default: - PRINT_WARN("(%s): MIM ServiceMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f70.smc); + snprintf(service, BUFSIZE, "0x%02x", + sense->fmt.f70.smc); break; } + + dev_warn (&device->cdev->dev, "Media information: exception %s, " + "service %s", exception, service); + +out_nomem: + kfree(exception); + kfree(service); } /* @@ -1051,108 +1060,108 @@ static void tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb) { struct tape_3590_sense *sense; + char *exception, *service; + + exception = kmalloc(BUFSIZE, GFP_ATOMIC); + service = kmalloc(BUFSIZE, GFP_ATOMIC); + + if (!exception || !service) + goto out_nomem; sense = (struct tape_3590_sense *) irb->ecw; /* Exception Message */ switch (sense->fmt.f71.emc) { case 0x01: - PRINT_WARN("(%s): Effect of failure is unknown\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "Effect of failure is unknown"); break; case 0x02: - PRINT_WARN("(%s): CU Exception - no performance impact\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "CU Exception - no performance " + "impact"); break; case 0x03: - PRINT_WARN("(%s): CU Exception on channel interface 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "CU Exception on channel " + "interface 0x%02x", sense->fmt.f71.md[0]); break; case 0x04: - PRINT_WARN("(%s): CU Exception on device path 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "CU Exception on device path " + "0x%02x", sense->fmt.f71.md[0]); break; case 0x05: - PRINT_WARN("(%s): CU Exception on library path 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "CU Exception on library path " + "0x%02x", sense->fmt.f71.md[0]); break; case 0x06: - PRINT_WARN("(%s): CU Exception on node 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x", + sense->fmt.f71.md[0]); break; case 0x07: - PRINT_WARN("(%s): CU Exception on partition 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "CU Exception on partition " + "0x%02x", sense->fmt.f71.md[0]); break; default: - PRINT_WARN("(%s): SIM ExMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.emc); + snprintf(exception, BUFSIZE, "0x%02x", + sense->fmt.f71.emc); } /* Service Message */ switch (sense->fmt.f71.smc) { case 0x01: - PRINT_WARN("(%s): Repair impact is unknown\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair impact is unknown"); break; case 0x02: - PRINT_WARN("(%s): Repair will not impact cu performance\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair will not impact cu " + "performance"); break; case 0x03: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable node " - "0x%x on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable node " + "0x%x on CU", sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable nodes " - "(0x%x-0x%x) on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable " + "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1], + sense->fmt.f71.md[2]); break; case 0x04: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable cannel path " - "0x%x on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable " + "channel path 0x%x on CU", + sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable cannel paths " - "(0x%x-0x%x) on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable cannel" + " paths (0x%x-0x%x) on CU", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x05: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable device path " - "0x%x on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable device" + " path 0x%x on CU", sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable device paths " - "(0x%x-0x%x) on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable device" + " paths (0x%x-0x%x) on CU", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x06: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable library path " - "0x%x on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable " + "library path 0x%x on CU", + sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable library paths " - "(0x%x-0x%x) on CU\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable " + "library paths (0x%x-0x%x) on CU", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x07: - PRINT_WARN("(%s): Repair will disable access to CU\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair will disable access to CU"); break; default: - PRINT_WARN("(%s): SIM ServiceMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.smc); + snprintf(service, BUFSIZE, "0x%02x", + sense->fmt.f71.smc); } + + dev_warn (&device->cdev->dev, "I/O subsystem information: exception" + " %s, service %s", exception, service); +out_nomem: + kfree(exception); + kfree(service); } /* @@ -1162,111 +1171,109 @@ static void tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb) { struct tape_3590_sense *sense; + char *exception, *service; + + exception = kmalloc(BUFSIZE, GFP_ATOMIC); + service = kmalloc(BUFSIZE, GFP_ATOMIC); + + if (!exception || !service) + goto out_nomem; sense = (struct tape_3590_sense *) irb->ecw; /* Exception Message */ switch (sense->fmt.f71.emc) { case 0x01: - PRINT_WARN("(%s): Effect of failure is unknown\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "Effect of failure is unknown"); break; case 0x02: - PRINT_WARN("(%s): DV Exception - no performance impact\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "DV Exception - no performance" + " impact"); break; case 0x03: - PRINT_WARN("(%s): DV Exception on channel interface 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "DV Exception on channel " + "interface 0x%02x", sense->fmt.f71.md[0]); break; case 0x04: - PRINT_WARN("(%s): DV Exception on loader 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x", + sense->fmt.f71.md[0]); break; case 0x05: - PRINT_WARN("(%s): DV Exception on message display 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.md[0]); + snprintf(exception, BUFSIZE, "DV Exception on message display" + " 0x%02x", sense->fmt.f71.md[0]); break; case 0x06: - PRINT_WARN("(%s): DV Exception in tape path\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "DV Exception in tape path"); break; case 0x07: - PRINT_WARN("(%s): DV Exception in drive\n", - dev_name(&device->cdev->dev)); + snprintf(exception, BUFSIZE, "DV Exception in drive"); break; default: - PRINT_WARN("(%s): DSIM ExMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.emc); + snprintf(exception, BUFSIZE, "0x%02x", + sense->fmt.f71.emc); } /* Service Message */ switch (sense->fmt.f71.smc) { case 0x01: - PRINT_WARN("(%s): Repair impact is unknown\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair impact is unknown"); break; case 0x02: - PRINT_WARN("(%s): Repair will not impact device performance\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair will not impact device " + "performance"); break; case 0x03: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable channel path " - "0x%x on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable " + "channel path 0x%x on DV", + sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable channel path " - "(0x%x-0x%x) on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable " + "channel path (0x%x-0x%x) on DV", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x04: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable interface 0x%x " - "on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable " + "interface 0x%x on DV", sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable interfaces " - "(0x%x-0x%x) on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable " + "interfaces (0x%x-0x%x) on DV", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x05: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable loader 0x%x " - "on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable loader" + " 0x%x on DV", sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable loader " - "(0x%x-0x%x) on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable loader" + " (0x%x-0x%x) on DV", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x07: - PRINT_WARN("(%s): Repair will disable access to DV\n", - dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Repair will disable access to DV"); break; case 0x08: if (sense->fmt.f71.mdf == 0) - PRINT_WARN("(%s): Repair will disable message " - "display 0x%x on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1]); + snprintf(service, BUFSIZE, "Repair will disable " + "message display 0x%x on DV", + sense->fmt.f71.md[1]); else - PRINT_WARN("(%s): Repair will disable message " - "displays (0x%x-0x%x) on DV\n", - dev_name(&device->cdev->dev), - sense->fmt.f71.md[1], sense->fmt.f71.md[2]); + snprintf(service, BUFSIZE, "Repair will disable " + "message displays (0x%x-0x%x) on DV", + sense->fmt.f71.md[1], sense->fmt.f71.md[2]); break; case 0x09: - PRINT_WARN("(%s): Clean DV\n", dev_name(&device->cdev->dev)); + snprintf(service, BUFSIZE, "Clean DV"); break; default: - PRINT_WARN("(%s): DSIM ServiceMsg: 0x%02x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.smc); + snprintf(service, BUFSIZE, "0x%02x", + sense->fmt.f71.smc); } + + dev_warn (&device->cdev->dev, "Device subsystem information: exception" + " %s, service %s", exception, service); +out_nomem: + kfree(exception); + kfree(service); } /* @@ -1282,46 +1289,42 @@ tape_3590_print_era_msg(struct tape_devi return; if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) { if (tape_3590_msg[sense->mc] != NULL) - PRINT_WARN("(%s): %s\n", dev_name(&device->cdev->dev), - tape_3590_msg[sense->mc]); - else { - PRINT_WARN("(%s): Message Code 0x%x\n", - dev_name(&device->cdev->dev), sense->mc); - } + dev_warn (&device->cdev->dev, "Tape sense message: %s", + tape_3590_msg[sense->mc]); + else + dev_warn (&device->cdev->dev, "Tape sense message code" + " 0x%x", sense->mc); return; } if (sense->mc == 0xf0) { /* Standard Media Information Message */ - PRINT_WARN("(%s): MIM SEV=%i, MC=%02x, ES=%x/%x, " - "RC=%02x-%04x-%02x\n", dev_name(&device->cdev->dev), - sense->fmt.f70.sev, sense->mc, - sense->fmt.f70.emc, sense->fmt.f70.smc, - sense->fmt.f70.refcode, sense->fmt.f70.mid, - sense->fmt.f70.fid); + dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, " + "RC=%02x-%04x-%02x", sense->fmt.f70.sev, sense->mc, + sense->fmt.f70.emc, sense->fmt.f70.smc, + sense->fmt.f70.refcode, sense->fmt.f70.mid, + sense->fmt.f70.fid); tape_3590_print_mim_msg_f0(device, irb); return; } if (sense->mc == 0xf1) { /* Standard I/O Subsystem Service Information Message */ - PRINT_WARN("(%s): IOSIM SEV=%i, DEVTYPE=3590/%02x, " - "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.sev, - device->cdev->id.dev_model, - sense->mc, sense->fmt.f71.emc, - sense->fmt.f71.smc, sense->fmt.f71.refcode1, - sense->fmt.f71.refcode2, sense->fmt.f71.refcode3); + dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x," + " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x", + sense->fmt.f71.sev, device->cdev->id.dev_model, + sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, + sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, + sense->fmt.f71.refcode3); tape_3590_print_io_sim_msg_f1(device, irb); return; } if (sense->mc == 0xf2) { /* Standard Device Service Information Message */ - PRINT_WARN("(%s): DEVSIM SEV=%i, DEVTYPE=3590/%02x, " - "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n", - dev_name(&device->cdev->dev), sense->fmt.f71.sev, - device->cdev->id.dev_model, - sense->mc, sense->fmt.f71.emc, - sense->fmt.f71.smc, sense->fmt.f71.refcode1, - sense->fmt.f71.refcode2, sense->fmt.f71.refcode3); + dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x" + ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x", + sense->fmt.f71.sev, device->cdev->id.dev_model, + sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc, + sense->fmt.f71.refcode1, sense->fmt.f71.refcode2, + sense->fmt.f71.refcode3); tape_3590_print_dev_sim_msg_f2(device, irb); return; } @@ -1329,8 +1332,7 @@ tape_3590_print_era_msg(struct tape_devi /* Standard Library Service Information Message */ return; } - PRINT_WARN("(%s): Device Message(%x)\n", - dev_name(&device->cdev->dev), sense->mc); + dev_warn (&device->cdev->dev, "Device Message(%x)", sense->mc); } static int tape_3590_crypt_error(struct tape_device *device, @@ -1355,9 +1357,7 @@ static int tape_3590_crypt_error(struct /* No connection to EKM */ return tape_3590_erp_basic(device, request, irb, -ENOTCONN); - PRINT_ERR("(%s): Unable to get encryption key from EKM\n", bus_id); - PRINT_ERR("(%s): CU=%02X DRIVE=%06X EKM=%02X:%04X\n", bus_id, cu_rc, - drv_rc, ekm_rc1, ekm_rc2); + dev_err (&device->cdev->dev, "Unable to get encryption key from EKM"); return tape_3590_erp_basic(device, request, irb, -ENOKEY); } @@ -1443,8 +1443,6 @@ tape_3590_unit_check(struct tape_device * print additional msg since default msg * "device intervention" is not very meaningfull */ - PRINT_WARN("(%s): Tape operation when medium not loaded\n", - dev_name(&device->cdev->dev)); tape_med_state_set(device, MS_UNLOADED); tape_3590_schedule_work(device, TO_CRYPT_OFF); return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); @@ -1490,19 +1488,14 @@ tape_3590_unit_check(struct tape_device return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM); case 0x6020: - PRINT_WARN("(%s): Cartridge of wrong type ?\n", - dev_name(&device->cdev->dev)); return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE); case 0x8011: - PRINT_WARN("(%s): Another host has reserved the tape device\n", - dev_name(&device->cdev->dev)); return tape_3590_erp_basic(device, request, irb, -EPERM); case 0x8013: - PRINT_WARN("(%s): Another host has privileged access to the " - "tape device\n", dev_name(&device->cdev->dev)); - PRINT_WARN("(%s): To solve the problem unload the current " - "cartridge!\n", dev_name(&device->cdev->dev)); + dev_warn (&device->cdev->dev, "Another host has privileged " + "access to the tape device, To solve the problem " + "unload the current cartridge!"); return tape_3590_erp_basic(device, request, irb, -EPERM); default: return tape_3590_erp_basic(device, request, irb, -EIO); @@ -1552,9 +1545,7 @@ tape_3590_irq(struct tape_device *device } DBF_EVENT(6, "xunknownirq\n"); - PRINT_ERR("Unexpected interrupt.\n"); - PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]); - tape_dump_sense(device, request, irb); + tape_dump_sense_dbf(device, request, irb); return TAPE_IO_STOP; } @@ -1609,7 +1600,6 @@ tape_3590_setup_device(struct tape_devic if (rc) goto fail_rdc_data; if (rdc_data->data[31] == 0x13) { - PRINT_INFO("Device has crypto support\n"); data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK; tape_3592_disable_crypt(device); } else { Index: quilt-2.6/drivers/s390/char/tape_block.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_block.c +++ quilt-2.6/drivers/s390/char/tape_block.c @@ -10,6 +10,8 @@ * Stefan Bader */ +#define KMSG_COMPONENT "tape_block" + #include #include #include @@ -23,8 +25,6 @@ #include "tape.h" -#define PRINTK_HEADER "TAPE_BLOCK: " - #define TAPEBLOCK_MAX_SEC 100 #define TAPEBLOCK_MIN_REQUEUE 3 @@ -279,8 +279,6 @@ tapeblock_cleanup_device(struct tape_dev tape_put_device(device); if (!device->blk_data.disk) { - PRINT_ERR("(%s): No gendisk to clean up!\n", - dev_name(&device->cdev->dev)); goto cleanup_queue; } @@ -314,7 +312,7 @@ tapeblock_revalidate_disk(struct gendisk if (!device->blk_data.medium_changed) return 0; - PRINT_INFO("Detecting media size...\n"); + dev_info(&device->cdev->dev, "Detecting media size..."); rc = tape_mtop(device, MTFSFM, 1); if (rc) return rc; @@ -341,7 +339,8 @@ tapeblock_revalidate_disk(struct gendisk device->bof = rc; nr_of_blks -= rc; - PRINT_INFO("Found %i blocks on media\n", nr_of_blks); + dev_info(&device->cdev->dev, "Found %i blocks on media", + nr_of_blks); set_capacity(device->blk_data.disk, nr_of_blks*(TAPEBLOCK_HSEC_SIZE/512)); @@ -376,8 +375,8 @@ tapeblock_open(struct block_device *bdev if (device->required_tapemarks) { DBF_EVENT(2, "TBLOCK: missing tapemarks\n"); - PRINT_ERR("TBLOCK: Refusing to open tape with missing" - " end of file marks.\n"); + dev_warn(&device->cdev->dev, "Refusing to open tape with" + " missing end of file marks."); rc = -EPERM; goto put_device; } @@ -452,7 +451,6 @@ tapeblock_ioctl( rc = -EINVAL; break; default: - PRINT_WARN("invalid ioctl 0x%x\n", command); rc = -EINVAL; } @@ -474,7 +472,6 @@ tapeblock_init(void) if (tapeblock_major == 0) tapeblock_major = rc; - PRINT_INFO("tape gets major %d for block device\n", tapeblock_major); return 0; } Index: quilt-2.6/drivers/s390/char/tape_char.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_char.c +++ quilt-2.6/drivers/s390/char/tape_char.c @@ -24,8 +24,6 @@ #include "tape_std.h" #include "tape_class.h" -#define PRINTK_HEADER "TAPE_CHAR: " - #define TAPECHAR_MAJOR 0 /* get dynamic major */ /* @@ -102,8 +100,6 @@ tapechar_check_idalbuffer(struct tape_de if (block_size > MAX_BLOCKSIZE) { DBF_EVENT(3, "Invalid blocksize (%zd > %d)\n", block_size, MAX_BLOCKSIZE); - PRINT_ERR("Invalid blocksize (%zd> %d)\n", - block_size, MAX_BLOCKSIZE); return -EINVAL; } @@ -485,7 +481,6 @@ tapechar_init (void) return -1; tapechar_major = MAJOR(dev); - PRINT_INFO("tape gets major %d for character devices\n", MAJOR(dev)); return 0; } @@ -496,7 +491,5 @@ tapechar_init (void) void tapechar_exit(void) { - PRINT_INFO("tape releases major %d for character devices\n", - tapechar_major); unregister_chrdev_region(MKDEV(tapechar_major, 0), 256); } Index: quilt-2.6/drivers/s390/char/tape_core.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_core.c +++ quilt-2.6/drivers/s390/char/tape_core.c @@ -11,6 +11,7 @@ * Stefan Bader */ +#define KMSG_COMPONENT "tape" #include #include // for kernel parameters #include // for requesting modules @@ -25,7 +26,6 @@ #include "tape.h" #include "tape_std.h" -#define PRINTK_HEADER "TAPE_CORE: " #define LONG_BUSY_TIMEOUT 180 /* seconds */ static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *); @@ -214,13 +214,11 @@ tape_med_state_set(struct tape_device *d switch(newstate){ case MS_UNLOADED: device->tape_generic_status |= GMT_DR_OPEN(~0); - PRINT_INFO("(%s): Tape is unloaded\n", - dev_name(&device->cdev->dev)); + dev_info(&device->cdev->dev, "Tape is unloaded"); break; case MS_LOADED: device->tape_generic_status &= ~GMT_DR_OPEN(~0); - PRINT_INFO("(%s): Tape has been mounted\n", - dev_name(&device->cdev->dev)); + dev_info(&device->cdev->dev, "Tape has been mounted"); break; default: // print nothing @@ -333,7 +331,6 @@ tape_generic_online(struct tape_device * /* Let the discipline have a go at the device. */ device->discipline = discipline; if (!try_module_get(discipline->owner)) { - PRINT_ERR("Cannot get module. Module gone.\n"); return -EINVAL; } @@ -391,7 +388,6 @@ int tape_generic_offline(struct tape_device *device) { if (!device) { - PRINT_ERR("tape_generic_offline: no such device\n"); return -ENODEV; } @@ -413,9 +409,6 @@ tape_generic_offline(struct tape_device DBF_EVENT(3, "(%08x): Set offline failed " "- drive in use.\n", device->cdev_id); - PRINT_WARN("(%s): Set offline failed " - "- drive in use.\n", - dev_name(&device->cdev->dev)); spin_unlock_irq(get_ccwdev_lock(device->cdev)); return -EBUSY; } @@ -435,14 +428,11 @@ tape_alloc_device(void) device = kzalloc(sizeof(struct tape_device), GFP_KERNEL); if (device == NULL) { DBF_EXCEPTION(2, "ti:no mem\n"); - PRINT_INFO ("can't allocate memory for " - "tape info structure\n"); return ERR_PTR(-ENOMEM); } device->modeset_byte = kmalloc(1, GFP_KERNEL | GFP_DMA); if (device->modeset_byte == NULL) { DBF_EXCEPTION(2, "ti:no mem\n"); - PRINT_INFO("can't allocate memory for modeset byte\n"); kfree(device); return ERR_PTR(-ENOMEM); } @@ -490,7 +480,6 @@ tape_put_device(struct tape_device *devi } else { if (remain < 0) { DBF_EVENT(4, "put device without reference\n"); - PRINT_ERR("put device without reference\n"); } else { DBF_EVENT(4, "tape_free_device(%p)\n", device); kfree(device->modeset_byte); @@ -538,8 +527,6 @@ tape_generic_probe(struct ccw_device *cd ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group); if (ret) { tape_put_device(device); - PRINT_ERR("probe failed for tape device %s\n", - dev_name(&cdev->dev)); return ret; } cdev->dev.driver_data = device; @@ -547,7 +534,6 @@ tape_generic_probe(struct ccw_device *cd device->cdev = cdev; ccw_device_get_id(cdev, &dev_id); device->cdev_id = devid_to_int(&dev_id); - PRINT_INFO("tape device %s found\n", dev_name(&cdev->dev)); return ret; } @@ -584,7 +570,6 @@ tape_generic_remove(struct ccw_device *c device = cdev->dev.driver_data; if (!device) { - PRINT_ERR("No device pointer in tape_generic_remove!\n"); return; } DBF_LH(3, "(%08x): tape_generic_remove(%p)\n", device->cdev_id, cdev); @@ -615,10 +600,8 @@ tape_generic_remove(struct ccw_device *c */ DBF_EVENT(3, "(%08x): Drive in use vanished!\n", device->cdev_id); - PRINT_WARN("(%s): Drive in use vanished - " - "expect trouble!\n", - dev_name(&device->cdev->dev)); - PRINT_WARN("State was %i\n", device->tape_state); + dev_warn(&device->cdev->dev, "Drive in use vanished - " + "expect trouble!"); tape_state_set(device, TS_NOT_OPER); __tape_discard_requests(device); spin_unlock_irq(get_ccwdev_lock(device->cdev)); @@ -830,30 +813,6 @@ __tape_end_request( } /* - * Write sense data to console/dbf - */ -void -tape_dump_sense(struct tape_device* device, struct tape_request *request, - struct irb *irb) -{ - unsigned int *sptr; - - PRINT_INFO("-------------------------------------------------\n"); - PRINT_INFO("DSTAT : %02x CSTAT: %02x CPA: %04x\n", - irb->scsw.cmd.dstat, irb->scsw.cmd.cstat, irb->scsw.cmd.cpa); - PRINT_INFO("DEVICE: %s\n", dev_name(&device->cdev->dev)); - if (request != NULL) - PRINT_INFO("OP : %s\n", tape_op_verbose[request->op]); - - sptr = (unsigned int *) irb->ecw; - PRINT_INFO("Sense data: %08X %08X %08X %08X \n", - sptr[0], sptr[1], sptr[2], sptr[3]); - PRINT_INFO("Sense data: %08X %08X %08X %08X \n", - sptr[4], sptr[5], sptr[6], sptr[7]); - PRINT_INFO("--------------------------------------------------\n"); -} - -/* * Write sense data to dbf */ void @@ -1051,8 +1010,6 @@ __tape_do_irq (struct ccw_device *cdev, device = (struct tape_device *) cdev->dev.driver_data; if (device == NULL) { - PRINT_ERR("could not get device structure for %s " - "in interrupt\n", dev_name(&cdev->dev)); return; } request = (struct tape_request *) intparm; @@ -1064,13 +1021,13 @@ __tape_do_irq (struct ccw_device *cdev, /* FIXME: What to do with the request? */ switch (PTR_ERR(irb)) { case -ETIMEDOUT: - PRINT_WARN("(%s): Request timed out\n", + DBF_LH(1, "(%s): Request timed out\n", dev_name(&cdev->dev)); case -EIO: __tape_end_request(device, request, -EIO); break; default: - PRINT_ERR("(%s): Unexpected i/o error %li\n", + DBF_LH(1, "(%s): Unexpected i/o error %li\n", dev_name(&cdev->dev), PTR_ERR(irb)); } @@ -1182,8 +1139,6 @@ __tape_do_irq (struct ccw_device *cdev, default: if (rc > 0) { DBF_EVENT(6, "xunknownrc\n"); - PRINT_ERR("Invalid return code from discipline " - "interrupt function.\n"); __tape_end_request(device, request, -EIO); } else { __tape_end_request(device, request, rc); @@ -1323,7 +1278,6 @@ EXPORT_SYMBOL(tape_state_set); EXPORT_SYMBOL(tape_med_state_set); EXPORT_SYMBOL(tape_alloc_request); EXPORT_SYMBOL(tape_free_request); -EXPORT_SYMBOL(tape_dump_sense); EXPORT_SYMBOL(tape_dump_sense_dbf); EXPORT_SYMBOL(tape_do_io); EXPORT_SYMBOL(tape_do_io_async); Index: quilt-2.6/drivers/s390/char/tape.h =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape.h +++ quilt-2.6/drivers/s390/char/tape.h @@ -324,8 +324,6 @@ static inline void tape_proc_cleanup (vo #endif /* a function for dumping device sense info */ -extern void tape_dump_sense(struct tape_device *, struct tape_request *, - struct irb *); extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *, struct irb *); Index: quilt-2.6/drivers/s390/char/tape_proc.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_proc.c +++ quilt-2.6/drivers/s390/char/tape_proc.c @@ -20,8 +20,6 @@ #include "tape.h" -#define PRINTK_HEADER "TAPE_PROC: " - static const char *tape_med_st_verbose[MS_SIZE] = { [MS_UNKNOWN] = "UNKNOWN ", @@ -128,7 +126,6 @@ tape_proc_init(void) proc_create("tapedevices", S_IFREG | S_IRUGO | S_IWUSR, NULL, &tape_proc_ops); if (tape_proc_devices == NULL) { - PRINT_WARN("tape: Cannot register procfs entry tapedevices\n"); return; } } Index: quilt-2.6/drivers/s390/char/tape_std.c =================================================================== --- quilt-2.6.orig/drivers/s390/char/tape_std.c +++ quilt-2.6/drivers/s390/char/tape_std.c @@ -26,8 +26,6 @@ #include "tape.h" #include "tape_std.h" -#define PRINTK_HEADER "TAPE_STD: " - /* * tape_std_assign */ @@ -46,9 +44,8 @@ tape_std_assign_timeout(unsigned long da device->cdev_id); rc = tape_cancel_io(device, request); if(rc) - PRINT_ERR("(%s): Assign timeout: Cancel failed with rc = %i\n", + DBF_EVENT(3, "(%s): Assign timeout: Cancel failed with rc = %i\n", dev_name(&device->cdev->dev), rc); - } int @@ -82,8 +79,6 @@ tape_std_assign(struct tape_device *devi del_timer(&timeout); if (rc != 0) { - PRINT_WARN("%s: assign failed - device might be busy\n", - dev_name(&device->cdev->dev)); DBF_EVENT(3, "%08x: assign failed - device might be busy\n", device->cdev_id); } else { @@ -105,8 +100,6 @@ tape_std_unassign (struct tape_device *d if (device->tape_state == TS_NOT_OPER) { DBF_EVENT(3, "(%08x): Can't unassign device\n", device->cdev_id); - PRINT_WARN("(%s): Can't unassign device - device gone\n", - dev_name(&device->cdev->dev)); return -EIO; } @@ -120,8 +113,6 @@ tape_std_unassign (struct tape_device *d if ((rc = tape_do_io(device, request)) != 0) { DBF_EVENT(3, "%08x: Unassign failed\n", device->cdev_id); - PRINT_WARN("%s: Unassign failed\n", - dev_name(&device->cdev->dev)); } else { DBF_EVENT(3, "%08x: Tape unassigned\n", device->cdev_id); } @@ -242,8 +233,6 @@ tape_std_mtsetblk(struct tape_device *de if (count > MAX_BLOCKSIZE) { DBF_EVENT(3, "Invalid block size (%d > %d) given.\n", count, MAX_BLOCKSIZE); - PRINT_ERR("Invalid block size (%d > %d) given.\n", - count, MAX_BLOCKSIZE); return -EINVAL; } @@ -633,14 +622,6 @@ tape_std_mtcompression(struct tape_devic if (mt_count < 0 || mt_count > 1) { DBF_EXCEPTION(6, "xcom parm\n"); - if (*device->modeset_byte & 0x08) - PRINT_INFO("(%s) Compression is currently on\n", - dev_name(&device->cdev->dev)); - else - PRINT_INFO("(%s) Compression is currently off\n", - dev_name(&device->cdev->dev)); - PRINT_INFO("Use 1 to switch compression on, 0 to " - "switch it off\n"); return -EINVAL; } request = tape_alloc_request(2, 0); -- blue skies, Martin. "Reality continues to ruin my life." - Calvin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/