Message-ID: <4934F441.8050606@panasas.com>
Date:	Tue, 02 Dec 2008 10:39:29 +0200
From:	Boaz Harrosh <bharrosh@...asas.com>
To:	"Nicholas A. Bellinger" <nab@...ux-iscsi.org>
CC:	FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
	Mike Christie <michaelc@...wisc.edu>,
	Christoph Hellwig <hch@....de>,
	James Bottomley <James.Bottomley@...senPartnership.com>,
	Andrew Morton <akpm@...l.org>,
	Alan Stern <stern@...land.harvard.edu>,
	Hannes Reinecke <hare@...e.de>,
	Jens Axboe <jens.axboe@...cle.com>,
	linux-scsi <linux-scsi@...r.kernel.org>,
	LKML <linux-kernel@...r.kernel.org>,
	"Linux-iSCSI.org Target Dev" 
	<linux-iscsi-target-dev@...glegroups.com>
Subject: Re: Changes to Linux/SCSI target mode infrastructure for v2.6.28

Nicholas A. Bellinger wrote:
> Greetings Tomo-san and Co,
> 
> With the ongoing work in Linux/SCSI for v2.6.28 to map target mode
> struct scatterlist memory directly down to struct scsi_cmnd without the
> need for a intermediate struct bio as with the existing
> scsi_execute_async(), I have started the porting process for the
> Linux/SCSI subsystem plugin in generic target core v3.0
> (lio-core-2.6.git) on v2.6.28-rc6.
> 
> So far, using struct request for ICF_SCSI_CONTROL_NONSG_IO_CDB is up
> using blk_rq_map_kern(), as well as ICF_SCSI_NON_DATA_CDB ops using
> struct request.  In order to get the first READ_10s of type
> ICF_SCSI_DATA_SG_IO_CDB to work, I had to add a temporary
> EXPORT_SYMBOL_GPL() for drivers/scsi/scsi_lib.c:scsi_req_map_sg() in
> lio-core-2.6.git for v2.6.28-rc6 in order to get TYPE_DISK up using an
> software emulated MPT-Fusion HBA driver with struct request.  I have
> been looking at drivers/scsi/scsi_tgt_lib.c() (which currently uses
> struct request), and I figure we need something similar for the generic
> target infrastructure, although __scsi_get_command() and
> __scsi_put_command() are currently used in that code.
> 
> Below is what my patch looks like so far, I will probably just end up
> commiting an temporary ifdef to keep scsi_execute_async() until the
> proper pieces are in place and the other issues are resolved below.
>>>From there I will be able to drop in the proper upstream mapping bits
> for struct scatterlist in
> drivers/lio-core/target_core_pscsi.c:pscsi_map_task_SG() get rid of
> scsi_req_map_sg() usage all together.
> 
> So far during my initial testing, I am running into a two different
> exceptions.  One NULL pointer deference OOPS after half dozen Open/iSCSI
> login/logouts in block/elevator.c:elv_dequeue_request().   Here is the
> trace from SCSI softirq context:
> 
> http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-0.png
> http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-1.png
> 
> The other one is a BUG_ON in blk/blk-timeout.c:177 in blk_add_timeout()
> that happens after a few hundred MB of READ_10 traffic, which also
> appears to pass through elv_dequeue_request() at some point:
> 
> http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-2.png
> http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-4.png
> 
> Tomo, Boaz, Jens, any comments..?
> 
> --nab
> 
> diff --git a/drivers/lio-core/target_core_pscsi.c b/drivers/lio-core/target_core_pscsi.c
> index ed9f588..5161483 100644
> --- a/drivers/lio-core/target_core_pscsi.c
> +++ b/drivers/lio-core/target_core_pscsi.c
> @@ -37,6 +37,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/smp_lock.h>
>  #include <linux/genhd.h>
> +#include <linux/cdrom.h>
>  #include <linux/file.h>
>  
>  #include <scsi/scsi.h>
> @@ -44,6 +45,7 @@
>  #include <scsi/scsi_cmnd.h>
>  #include <scsi/scsi_host.h>
>  #include <sd.h>
> +#include <sr.h>
>  
>  #include <iscsi_linux_os.h>
>  #include <iscsi_linux_defs.h>
> @@ -763,11 +765,11 @@ extern void *pscsi_allocate_request (
>  	se_device_t *dev)
>  {
>  	pscsi_plugin_task_t *pt;
> -	if (!(pt = kmalloc(sizeof(pscsi_plugin_task_t), GFP_KERNEL))) {
> -		TRACE_ERROR("Unable to allocate pscsi_plugin_task_t\n");
> +	
> +	if (!(pt = kzalloc(sizeof(pscsi_plugin_task_t), GFP_KERNEL))) {
> +		printk(KERN_ERR "Unable to allocate pscsi_plugin_task_t\n");
>  		return(NULL);
>  	}
> -	memset(pt, 0, sizeof(pscsi_plugin_task_t));
>  
>  	return(pt);
>  }
> @@ -788,7 +790,44 @@ extern void pscsi_get_evpd_sn (unsigned char *buf, u32 size, se_device_t *dev)
>  	return;
>  }
>  
> -/*	pscsi_do_task(): (Part of se_subsystem_api_t template)
> +static int pscsi_blk_get_request (se_task_t *task)
> +{
> +	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
> +	pscsi_dev_virt_t *pdv = (pscsi_dev_virt_t *) task->iscsi_dev->dev_ptr;
> +
> +	pt->pscsi_req = blk_get_request(pdv->pdv_sd->request_queue,
> +			(pt->pscsi_direction == DMA_TO_DEVICE), GFP_KERNEL);
> +	if (!(pt->pscsi_req) || IS_ERR(pt->pscsi_req)) {
> +		printk(KERN_ERR "PSCSI: blk_get_request() failed: %ld\n",
> +				IS_ERR(pt->pscsi_req));
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +	}
> +	/*
> +	 * Defined as "scsi command" in include/linux/blkdev.h.
> +	 */
> +	pt->pscsi_req->cmd_type = REQ_TYPE_BLOCK_PC;
> +	/*
> +	 * Setup the done function pointer for struct request,
> +	 * also set the end_io_data pointer.to se_task_t.
> +	 */
> +	pt->pscsi_req->end_io = pscsi_req_done;
> +	pt->pscsi_req->end_io_data = (void *)task;
> +	/*
> +	 * Load the referenced se_task_t's SCSI CDB into
> +	 * include/linux/blkdev.h:struct request->cmd
> +	 */
> +	pt->pscsi_req->cmd_len = COMMAND_SIZE(pt->pscsi_cdb[0]);
> +	memcpy(pt->pscsi_req->cmd, pt->pscsi_cdb, pt->pscsi_req->cmd_len);

pt->pscsi_cdb is that a static sized buffer? What do you do with larger
commands received on the iscsi wire. Are they dropped? If you did have
the full > 16 CDB in some buffer you could do:

+	pt->pscsi_req->cmd_len = scsi_command_size(pt->pscsi_cdb);
+	pt->pscsi_req->cmd = pt->pscsi_cdb;

> +	/*
> +	 * Setup pointer for outgoing sense data.
> +	 */
> +	pt->pscsi_req->sense = (void *)&pt->pscsi_sense[0];
> +	pt->pscsi_req->sense_len = 0;
> +
> +	return(0);
> +}
> +
> +/*      pscsi_do_task(): (Part of se_subsystem_api_t template)
>   *
>   *
>   */
> @@ -796,17 +835,32 @@ extern int pscsi_do_task (se_task_t *task)
>  {
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  	pscsi_dev_virt_t *pdv = (pscsi_dev_virt_t *) task->iscsi_dev->dev_ptr;
> -	int ret;
> -	
> -	if ((ret = scsi_execute_async((struct scsi_device *)pdv->pdv_sd,
> -			   pt->pscsi_cdb, COMMAND_SIZE(pt->pscsi_cdb[0]), pt->pscsi_direction,
> -			   pt->pscsi_buf, task->task_size, task->task_sg_num,
> -			   (task->se_obj_api->get_device_type(task->se_obj_ptr) == 0) ?
> -			   PS_TIMEOUT_DISK : PS_TIMEOUT_OTHER, PS_RETRY,
> -			   (void *)task, pscsi_req_done, GFP_KERNEL)) != 0) {
> -		TRACE_ERROR("PSCSI Execute(): returned: %d\n", ret);
> -		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> -	}	
> +	struct gendisk *gd = NULL;
> +	/*
> +	 * Grab pointer to struct gendisk for TYPE_DISK and TYPE_ROM
> +	 * cases (eg: cases where struct scsi_device has a backing
> +	 * struct block_device.  Also set the struct request->timeout
> +	 * value based on peripheral device type (from SCSI).
> +	 */
> +	if (pdv->pdv_sd->type == TYPE_DISK) {
> +		struct scsi_disk *sdisk = dev_get_drvdata(
> +					&pdv->pdv_sd->sdev_gendev);
> +		gd = sdisk->disk;
> +		pt->pscsi_req->timeout = PS_TIMEOUT_DISK;
> +	} else if (pdv->pdv_sd->type == TYPE_ROM) {
> +		struct scsi_cd *scd = dev_get_drvdata(
> +					&pdv->pdv_sd->sdev_gendev);
> +		gd = scd->disk;
> +		pt->pscsi_req->timeout = PS_TIMEOUT_OTHER;
> +	} else
> +		pt->pscsi_req->timeout = PS_TIMEOUT_OTHER;
> +
> +	pt->pscsi_req->retries = PS_RETRY;
> +	/*
> +	 * Queue the struct request into the struct scsi_device->request_queue.
> +	 */
> +	blk_execute_rq_nowait(pdv->pdv_sd->request_queue, gd,
> +			      pt->pscsi_req, 1, pscsi_req_done);
>  
>  	return(PYX_TRANSPORT_SENT_TO_TRANSPORT);
>  }
> @@ -817,7 +871,14 @@ extern int pscsi_do_task (se_task_t *task)
>   */
>  extern void pscsi_free_task (se_task_t *task)
>  {
> -	kfree(task->transport_req);
> +	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
> +
> +	if (pt->pscsi_req) {
> +		blk_put_request(pt->pscsi_req);	
> +		pt->pscsi_req = NULL;
> +	}
> +
> +	kfree(pt);
>  	return;
>  }
>  
> @@ -1099,31 +1160,65 @@ extern void __pscsi_get_dev_info (pscsi_dev_virt_t *pdv, char *b, int *bl)
>  	return;
>  }
>  
> -/*	pscsi_map_task_SG(): 
> +extern int scsi_req_map_sg(struct request *, struct scatterlist *, int,  unsigned , gfp_t );
> +
> +/*      pscsi_map_task_SG(): 
>   *
>   *
>   */
> -extern void pscsi_map_task_SG (se_task_t *task)
> +extern int pscsi_map_task_SG (se_task_t *task)
>  {
>          pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
> +	int ret = 0;
> +
>  	pt->pscsi_buf = (void *)task->task_buf;
>  
> -	return;
> +	if (!task->task_size)
> +		return(0);
> +#if 0
> +	if ((ret = blk_rq_map_sg(pdv->pdv_sd->request_queue,
> +			pt->pscsi_req,
> +			(struct scatterlist *)pt->pscsi_buf)) < 0) {
> +		printk(KERN_ERR "PSCSI: blk_rq_map_sg() returned %d\n", ret);
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +	}
> +#else
> +	if ((ret = scsi_req_map_sg(pt->pscsi_req,
> +			(struct scatterlist *)pt->pscsi_buf,
> +			task->task_sg_num, task->task_size,
> +			GFP_KERNEL)) < 0) {
> +		printk(KERN_ERR "PSCSI: scsi_req_map_sg() failed: %d\n", ret);
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +	}
> +#endif
> +	return(0);
>  }
>  
>  /*	pscsi_map_task_non_SG():
>   *
>   *
>   */
> -extern void pscsi_map_task_non_SG (se_task_t *task)
> +extern int pscsi_map_task_non_SG (se_task_t *task)
>  {
>  	iscsi_cmd_t *cmd = task->iscsi_cmd;
> +	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
> +	pscsi_dev_virt_t *pdv = (pscsi_dev_virt_t *) task->iscsi_dev->dev_ptr;
>  	unsigned char *buf = (unsigned char *) T_TASK(cmd)->t_task_buf;
> +	int ret = 0;
>  
> -	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  	pt->pscsi_buf = (void *)buf;
>  
> -	return;
> +	if (!task->task_size)
> +		return(0);
> +
> +	if ((ret = blk_rq_map_kern(pdv->pdv_sd->request_queue,
> +			pt->pscsi_req, pt->pscsi_buf,
> +			task->task_size, GFP_KERNEL)) < 0) {
> +		printk(KERN_ERR "PSCSI: blk_rq_map_kern() failed: %d\n", ret);
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +	}
> +
> +	return(0);
>  }
>  
>  /*	pscsi_CDB_inquiry():
> @@ -1135,9 +1230,11 @@ extern int pscsi_CDB_inquiry (se_task_t *task, u32 size)
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  
>  	pt->pscsi_direction = DMA_FROM_DEVICE;
> -	pscsi_map_task_non_SG(task);
> +	
> +	if (pscsi_blk_get_request(task) < 0)
> +		return(-1);
>  
> -	return(0);
> +	return(pscsi_map_task_non_SG(task));
>  }
>  
>  extern int pscsi_CDB_none (se_task_t *task, u32 size)
> @@ -1146,7 +1243,7 @@ extern int pscsi_CDB_none (se_task_t *task, u32 size)
>  
>  	pt->pscsi_direction = DMA_NONE;
>  
> -	return(0);
> +	return(pscsi_blk_get_request(task));
>  }
>  
>  /*	pscsi_CDB_read_non_SG():
> @@ -1158,9 +1255,11 @@ extern int pscsi_CDB_read_non_SG (se_task_t *task, u32 size)
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  
>  	pt->pscsi_direction = DMA_FROM_DEVICE;
> -	pscsi_map_task_non_SG(task);
>  
> -	return(0);
> +	if (pscsi_blk_get_request(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +
> +	return(pscsi_map_task_non_SG(task));
>  }
>  
>  /*	pscsi_CDB_read_SG():
> @@ -1172,7 +1271,12 @@ extern int pscsi_CDB_read_SG (se_task_t *task, u32 size)
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  
>  	pt->pscsi_direction = DMA_FROM_DEVICE;
> -	pscsi_map_task_SG(task);
> +
> +	if (pscsi_blk_get_request(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +
> +	if (pscsi_map_task_SG(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
>  
>  	return(task->task_sg_num);
>  }
> @@ -1186,9 +1290,11 @@ extern int pscsi_CDB_write_non_SG (se_task_t *task, u32 size)
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  
>  	pt->pscsi_direction = DMA_TO_DEVICE;
> -	pscsi_map_task_non_SG(task);
>  
> -	return(0);
> +	if (pscsi_blk_get_request(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +
> +	return(pscsi_map_task_non_SG(task));
>  }
>  
>  /*	pscsi_CDB_write_SG():
> @@ -1200,7 +1306,12 @@ extern int pscsi_CDB_write_SG (se_task_t *task, u32 size)
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *) task->transport_req;
>  
>  	pt->pscsi_direction = DMA_TO_DEVICE;
> -	pscsi_map_task_SG(task);
> +
> +	if (pscsi_blk_get_request(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
> +
> +	if (pscsi_map_task_SG(task) < 0)
> +		return(PYX_TRANSPORT_LOGICAL_UNIT_COMMUNICATION_FAILURE);
>  	
>  	return(task->task_sg_num);
>  }
> @@ -1386,22 +1497,25 @@ extern void pscsi_shutdown_hba (se_hba_t *hba)
>   *
>   *
>   */
> -//#warning FIXME: We can do some custom handling of HBA fuckups here.
> -extern inline void pscsi_process_SAM_status (se_task_t *task, unsigned char *cdb, int result)
> +static inline void pscsi_process_SAM_status (
> +	se_task_t *task,
> +	pscsi_plugin_task_t *pt)
>  {
> -	if ((task->task_scsi_status = status_byte(result))) {
> +	if ((task->task_scsi_status = status_byte(pt->pscsi_result))) {
>  		task->task_scsi_status <<= 1;
> -		PYXPRINT("Parallel SCSI Status Byte exception - ITT: 0x%08x Task: %p CDB: 0x%02x"
> -			" Result: 0x%08x\n", task->iscsi_cmd->init_task_tag, task, cdb[0], result);
> +		PYXPRINT("PSCSI Status Byte exception at task: %p CDB: 0x%02x"
> +			" Result: 0x%08x\n", task, pt->pscsi_cdb[0],
> +			pt->pscsi_result);
>  	}
>  
> -	switch (host_byte(result)) {
> +	switch (host_byte(pt->pscsi_result)) {
>  	case DID_OK:
>  		transport_complete_task(task, (!task->task_scsi_status));
>  		break;
>  	default:
> -		PYXPRINT("Parallel SCSI Host Byte exception - ITT: 0x%08x Task: %p CDB: 0x%02x"
> -			" Result: 0x%08x\n", task->iscsi_cmd->init_task_tag, task, cdb[0], result);
> +		PYXPRINT("PSCSI Host Byte exception at task: %p CDB: 0x%02x"
> +			" Result: 0x%08x\n", task, pt->pscsi_cdb[0],
> +			pt->pscsi_result);
>  		task->task_scsi_status = SAM_STAT_CHECK_CONDITION;
>  		task->task_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
>  		task->iscsi_cmd->transport_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
> @@ -1412,21 +1526,17 @@ extern inline void pscsi_process_SAM_status (se_task_t *task, unsigned char *cdb
>  	return;
>  }
>  
> -extern void pscsi_req_done (void *data, char *sense, int result, int data_len)
> +extern void pscsi_req_done (struct request *req, int uptodate)
>  {
> -	se_task_t *task = (se_task_t *)data;
> +	se_task_t *task = (se_task_t *)req->end_io_data;	
>  	pscsi_plugin_task_t *pt = (pscsi_plugin_task_t *)task->transport_req;
> -#if 0
> -	printk("pscsi_req_done(): result: %08x, sense: %p data_len: %d\n",
> -			result, sense, data_len);
> -#endif	
> -	pt->pscsi_result = result;
> -	pt->pscsi_data_len = data_len;
> -
> -	if (result != 0)
> -		memcpy(pt->pscsi_sense, sense, SCSI_SENSE_BUFFERSIZE);
> +
> +	pt->pscsi_result = req->errors;
> +	pt->pscsi_resid = req->data_len;
>  	
> -	pscsi_process_SAM_status(task, &pt->pscsi_cdb[0], result);
> +	pscsi_process_SAM_status(task, pt);
> +
> +	__blk_put_request(req->q, req);
> +
>  	return;
>  }
> -
> diff --git a/drivers/lio-core/target_core_pscsi.h b/drivers/lio-core/target_core_pscsi.h
> index 980587d..090f0d2 100644
> --- a/drivers/lio-core/target_core_pscsi.h
> +++ b/drivers/lio-core/target_core_pscsi.h
> @@ -90,7 +90,7 @@ extern struct scatterlist *pscsi_get_SG (se_task_t *);
>  extern u32 pscsi_get_SG_count (se_task_t *);
>  extern int pscsi_set_non_SG_buf (unsigned char *, se_task_t *);
>  extern void pscsi_shutdown_hba (struct se_hba_s *);
> -extern void pscsi_req_done (void *, char *, int, int);
> +extern void pscsi_req_done (struct request *, int);
>  #endif
>  
>  #include <linux/device.h>
> @@ -104,8 +104,9 @@ typedef struct pscsi_plugin_task_s {
>  	unsigned char pscsi_sense[SCSI_SENSE_BUFFERSIZE];
>  	int	pscsi_direction;
>  	int	pscsi_result;
> -	u32	pscsi_data_len;
> +	u32	pscsi_resid;
>  	void	*pscsi_buf;

-	void	*pscsi_buf;
+	struct scatterlist kern_buff;
+	struct scatterlist *pscsi_sg;

See comment bellow, you will need to change all that code,
functions APIs the works

> +	struct request *pscsi_req;
>  } pscsi_plugin_task_t;
>  
>  #define PDF_HAS_CHANNEL_ID	0x01
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index f5d3b96..9e03a02 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -303,8 +303,8 @@ static void scsi_bi_endio(struct bio *bio, int error)
>   * request can be sent to the block layer. We do not trust the scatterlist
>   * sent to use, as some ULDs use that struct to only organize the pages.
>   */
> -static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
> -			   int nsegs, unsigned bufflen, gfp_t gfp)
> +int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
> +		    int nsegs, unsigned bufflen, gfp_t gfp)
>  {
>  	struct request_queue *q = rq->q;
>  	int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
> @@ -379,6 +379,8 @@ free_bios:
>  	return err;
>  }
>  
> +EXPORT_SYMBOL_GPL(scsi_req_map_sg);
> +

Hmmm this is going away from here soon I hope. Better copy past it into your
own code. Perhaps optimize to your needs.

>  /**
>   * scsi_execute_async - insert request
>   * @sdev:	scsi device
> 
> 

Do you have this code on a gitweb somewhere. I'm to lazy to download everything
here?

One thing I can not see is where you get your "(struct scatterlist *)pt->pscsi_buf"
scatterlist from? is that from the network layer? don't you get them one by one
from the network layer and copy them to your own allocated scatterlist array?
Do you actually receive a network allocated scatterlist array? because if not
you should go directly to BIOs and drop that scatterlist stuff.

Also that void* SG/NON_SG type cast crap is not acceptable any more. We worked
very hard to clean all that up. You need to hold typed scatterlist pointer and if
you happen to have single kernel buffers for submission you hold an struct scatterlist
somewhere and do an sg_init_one() on the kernel buffer. For me this is preliminary to
even consider this code.

Boaz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists