[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1228187439.13241.176.camel@haakon2.linux-iscsi.org>
Date: Mon, 01 Dec 2008 19:10:39 -0800
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Tejun Heo <tj@...nel.org>,
Mike Anderson <andmike@...ux.vnet.ibm.com>
Cc: Mike Christie <michaelc@...wisc.edu>,
Christoph Hellwig <hch@....de>,
James Bottomley <James.Bottomley@...senPartnership.com>,
Andrew Morton <akpm@...l.org>,
Alan Stern <stern@...land.harvard.edu>,
Hannes Reinecke <hare@...e.de>,
Boaz Harrosh <bharrosh@...asas.com>,
Jens Axboe <jens.axboe@...cle.com>,
linux-scsi <linux-scsi@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
"Linux-iSCSI.org Target Dev"
<linux-iscsi-target-dev@...glegroups.com>
Subject: Re: Changes to Linux/SCSI target mode infrastructure for v2.6.28
On Mon, 2008-12-01 at 18:04 -0800, Nicholas A. Bellinger wrote:
> On Mon, 2008-12-01 at 17:52 -0800, Nicholas A. Bellinger wrote:
> > Greetings Tomo-san and Co,
> >
> > With the ongoing work in Linux/SCSI for v2.6.28 to map target mode
> > struct scatterlist memory directly down to struct scsi_cmnd without the
> > need for a intermediate struct bio as with the existing
> > scsi_execute_async(), I have started the porting process for the
> > Linux/SCSI subsystem plugin in generic target core v3.0
> > (lio-core-2.6.git) on v2.6.28-rc6.
> >
> > So far, using struct request for ICF_SCSI_CONTROL_NONSG_IO_CDB is up
> > using blk_rq_map_kern(), as well as ICF_SCSI_NON_DATA_CDB ops using
> > struct request. In order to get the first READ_10s of type
> > ICF_SCSI_DATA_SG_IO_CDB to work, I had to add a temporary
> > EXPORT_SYMBOL_GPL() for drivers/scsi/scsi_lib.c:scsi_req_map_sg() in
> > lio-core-2.6.git for v2.6.28-rc6 in order to get TYPE_DISK up using an
> > software emulated MPT-Fusion HBA driver with struct request. I have
> > been looking at drivers/scsi/scsi_tgt_lib.c() (which currently uses
> > struct request), and I figure we need something similar for the generic
> > target infrastructure, although __scsi_get_command() and
> > __scsi_put_command() are currently used in that code.
> >
> > Below is what my patch looks like so far, I will probably just end up
> > commiting an temporary ifdef to keep scsi_execute_async() until the
> > proper pieces are in place and the other issues are resolved below.
> > >From there I will be able to drop in the proper upstream mapping bits
> > for struct scatterlist in
> > drivers/lio-core/target_core_pscsi.c:pscsi_map_task_SG() get rid of
> > scsi_req_map_sg() usage all together.
> >
> > So far during my initial testing, I am running into a two different
> > exceptions. One NULL pointer deference OOPS after half dozen Open/iSCSI
> > login/logouts in block/elevator.c:elv_dequeue_request(). Here is the
> > trace from SCSI softirq context:
> >
> > http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-0.png
> > http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-1.png
> >
> > The other one is a BUG_ON in blk/blk-timeout.c:177 in blk_add_timeout()
> > that happens after a few hundred MB of READ_10 traffic, which also
> > appears to pass through elv_dequeue_request() at some point:
> >
> > http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-2.png
> > http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-4.png
> >
>
> Ok, I just saw this patch:
>
> [PATCH 2.6.28-rc6] block: internal dequeue shouldn't start timer
>
> at http://lkml.org/lkml/2008/11/27/394.
>
> It sounds very similar and I will try it out and see if it resolves the
> issues above.
>
Ok, patch applied and rerunning, this time after ~20 Open/iSCSI
--login/--logout ops. The same BUG_ON in blk/blk-timeout.c:177 in
blk_add_timeout() again triggered again, this time coming from
blkdev_dequeue_request() -> scsi_request_fn() ->
__generic_unplugin_device().
http://linux-iscsi.org/builds/user/nab/2.6.28-rc6-oops-5.png
blkdev_dequeue_request() is used in a few other places in drivers/scsi:
target:/mnt/sdb/lio-core-2.6/drivers/scsi# grep blkdev_dequeue_request *
Binary file built-in.o matches
scsi_lib.c: blkdev_dequeue_request(req);
scsi_lib.c: blkdev_dequeue_request(req);
Binary file scsi_lib.o matches
Binary file scsi_mod.o matches
scsi_transport_sas.c: blkdev_dequeue_request(req);
Do these need to be changed to use elv_dequeue_request() as well..?
--nab
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists