| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200812031350.46794.rusty@rustcorp.com.au>
Date: Wed, 3 Dec 2008 13:50:45 +1030
From: Rusty Russell <rusty@...tcorp.com.au>
To: linux-kernel@...r.kernel.org
Cc: Richard Henderson <rth@...ddle.net>,
Russell King <rmk@....linux.org.uk>,
Haavard Skinnemoen <hskinnemoen@...el.com>,
Bryan Wu <cooloney@...nel.org>,
Mikael Starvik <starvik@...s.com>,
David Howells <dhowells@...hat.com>,
Yoshinori Sato <ysato@...rs.sourceforge.jp>,
Tony Luck <tony.luck@...el.com>,
Hirokazu Takata <takata@...ux-m32r.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Greg Ungerer <gerg@...inux.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Grant Grundler <grundler@...isc-linux.org>,
Paul Mackerras <paulus@...ba.org>,
Heiko Carstens <heiko.carstens@...ibm.com>,
Paul Mundt <lethal@...ux-sh.org>,
"David S. Miller" <davem@...emloft.net>,
Jeff Dike <jdike@...toit.com>, Ingo Molnar <mingo@...hat.com>,
Chris Zankel <chris@...kel.net>
Subject: [RFC 5/8] param: arch_get_boot_command_line() (take II)
(All patches can be found in the git tree. Please test your arch before
I break it in linux-next ;)
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-boot-params.git )
This allows us to get the command line before setup_arch(): right at
the beginning of start_kernel(). It also cleans up chaotic
commandline handling.
This means most setup_arch boutique early cmdline handling can be
turned into core_params or early_setup. This saves some bytes, and
core_param also gets them that optional sysfs presence.
I used fixme's to suggest further arch-specific cleanups.
Signed-off-by: Rusty Russell <rusty@...tcorp.com.au>
---
arch/alpha/kernel/setup.c | 36 +++++++++++++----------
arch/arm/kernel/setup.c | 44 ++++++++++++++++-------------
arch/avr32/kernel/setup.c | 13 +++-----
arch/blackfin/kernel/setup.c | 22 +++++++-------
arch/cris/kernel/setup.c | 29 +++++++++----------
arch/frv/kernel/setup.c | 11 ++++---
arch/h8300/kernel/setup.c | 27 +++++++++--------
arch/ia64/dig/setup.c | 2 -
arch/ia64/hp/sim/hpsim_setup.c | 2 -
arch/ia64/include/asm/machvec.h | 4 +-
arch/ia64/include/asm/paravirt.h | 8 ++---
arch/ia64/kernel/machvec.c | 2 -
arch/ia64/kernel/setup.c | 22 +++++++-------
arch/ia64/sn/kernel/setup.c | 9 ++---
arch/ia64/uv/kernel/setup.c | 2 -
arch/ia64/xen/xen_pv_ops.c | 2 -
arch/m32r/kernel/setup.c | 16 +++++-----
arch/m68k/kernel/setup.c | 25 +++++++++++-----
arch/m68knommu/include/asm/machdep.h | 2 -
arch/m68knommu/kernel/setup.c | 33 +++++++++++----------
arch/m68knommu/platform/5206/config.c | 2 -
arch/m68knommu/platform/5206e/config.c | 16 +++++-----
arch/m68knommu/platform/520x/config.c | 2 -
arch/m68knommu/platform/523x/config.c | 2 -
arch/m68knommu/platform/5249/config.c | 2 -
arch/m68knommu/platform/5272/config.c | 23 +++++++--------
arch/m68knommu/platform/527x/config.c | 2 -
arch/m68knommu/platform/528x/config.c | 2 -
arch/m68knommu/platform/5307/config.c | 13 +++++---
arch/m68knommu/platform/532x/config.c | 22 ++++++--------
arch/m68knommu/platform/5407/config.c | 2 -
arch/m68knommu/platform/68328/config.c | 2 -
arch/m68knommu/platform/68328/head-pilot.S | 2 -
arch/m68knommu/platform/68360/config.c | 6 ++-
arch/m68knommu/platform/68EZ328/config.c | 4 +-
arch/m68knommu/platform/68VZ328/config.c | 12 ++++---
arch/mips/kernel/setup.c | 18 ++++++-----
arch/mn10300/kernel/setup.c | 17 +++++------
arch/parisc/kernel/setup.c | 30 ++++++++-----------
arch/powerpc/kernel/setup_32.c | 10 ++++--
arch/powerpc/kernel/setup_64.c | 8 +++--
arch/s390/kernel/setup.c | 6 ---
arch/sh/boards/board-magicpanelr2.c | 2 -
arch/sh/boards/board-sh7785lcr.c | 2 -
arch/sh/boards/mach-dreamcast/setup.c | 2 -
arch/sh/boards/mach-highlander/setup.c | 2 -
arch/sh/boards/mach-hp6xx/setup.c | 2 -
arch/sh/boards/mach-landisk/setup.c | 2 -
arch/sh/boards/mach-microdev/setup.c | 2 -
arch/sh/boards/mach-migor/setup.c | 2 -
arch/sh/boards/mach-r2d/setup.c | 2 -
arch/sh/boards/mach-sdk7780/setup.c | 2 -
arch/sh/boards/mach-se/7343/setup.c | 2 -
arch/sh/boards/mach-se/770x/setup.c | 2 -
arch/sh/boards/mach-se/7721/setup.c | 2 -
arch/sh/boards/mach-se/7722/setup.c | 2 -
arch/sh/boards/mach-se/7780/setup.c | 2 -
arch/sh/boards/mach-sh03/setup.c | 2 -
arch/sh/boards/mach-sh7763rdp/setup.c | 2 -
arch/sh/include/asm/machvec.h | 2 -
arch/sh/kernel/setup.c | 26 +++++++++--------
arch/sparc/kernel/setup.c | 13 +++++---
arch/sparc64/kernel/setup.c | 13 +++++---
arch/um/kernel/um_arch.c | 10 ++++--
arch/x86/kernel/setup.c | 38 +++++++++++++------------
arch/xtensa/kernel/setup.c | 19 ++++++------
include/linux/init.h | 3 +
init/main.c | 20 ++++++++-----
kernel/kexec.c | 1
69 files changed, 379 insertions(+), 314 deletions(-)
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -496,8 +496,27 @@ register_cpus(void)
arch_initcall(register_cpus);
+void arch_get_boot_command_line(void)
+{
+ /*
+ * Locate the command line.
+ */
+ /* Hack for Jensen... since we're restricted to 8 or 16 chars for
+ boot flags depending on the boot mode, we need some shorthand.
+ This should do for installation. */
+ if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
+ strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1",
+ sizeof command_line);
+ } else {
+ strlcpy(command_line, COMMAND_LINE, sizeof command_line);
+ }
+
+ /* FIXME: Can we skip command_line and just use boot_command_line? */
+ strcpy(boot_command_line, command_line);
+}
+
void __init
-setup_arch(char **cmdline_p)
+setup_arch(void)
{
extern char _end[];
@@ -542,21 +561,8 @@ setup_arch(char **cmdline_p)
kernel_end = callback_init(kernel_end);
/*
- * Locate the command line.
- */
- /* Hack for Jensen... since we're restricted to 8 or 16 chars for
- boot flags depending on the boot mode, we need some shorthand.
- This should do for installation. */
- if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
- strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
- } else {
- strlcpy(command_line, COMMAND_LINE, sizeof command_line);
- }
- strcpy(boot_command_line, command_line);
- *cmdline_p = command_line;
-
- /*
* Process command-line arguments.
+ * FIXME: Use core_param.
*/
while ((p = strsep(&args, " \t")) != NULL) {
if (!*p) continue;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -115,7 +115,6 @@ static struct meminfo meminfo __initdata
static struct meminfo meminfo __initdata = { 0, };
static const char *cpu_name;
static const char *machine_name;
-static char __initdata command_line[COMMAND_LINE_SIZE];
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b'
} };
@@ -414,10 +413,12 @@ __early_param("mem=", early_mem);
/*
* Initial parsing of the command line.
+ * FIXME: Use generic core_param. This actually removes args from the
+ * cmdline as seen in /proc!
*/
-static void __init parse_cmdline(char **cmdline_p, char *from)
+static void __init parse_cmdline(char *from)
{
- char c = ' ', *to = command_line;
+ char c = ' ', *to = boot_command_line;
int len = 0;
for (;;) {
@@ -429,7 +430,7 @@ static void __init parse_cmdline(char **
int arglen = strlen(p->arg);
if (memcmp(from, p->arg, arglen) == 0) {
- if (to != command_line)
+ if (to != boot_command_line)
to -= 1;
from += arglen;
p->fn(&from);
@@ -448,7 +449,6 @@ static void __init parse_cmdline(char **
*to++ = c;
}
*to = '\0';
- *cmdline_p = command_line;
}
static void __init
@@ -673,7 +673,8 @@ static int __init customize_machine(void
}
arch_initcall(customize_machine);
-void __init setup_arch(char **cmdline_p)
+/* We not only get the command line here, we parse the tags as well. */
+void __init arch_get_boot_command_line(void)
{
struct tag *tags = (struct tag *)&init_tags;
struct machine_desc *mdesc;
@@ -681,10 +682,6 @@ void __init setup_arch(char **cmdline_p)
setup_processor();
mdesc = setup_machine(machine_arch_type);
- machine_name = mdesc->name;
-
- if (mdesc->soft_reboot)
- reboot_setup("s");
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
@@ -703,21 +700,29 @@ void __init setup_arch(char **cmdline_p)
if (mdesc->fixup)
mdesc->fixup(mdesc, tags, &from, &meminfo);
- if (tags->hdr.tag == ATAG_CORE) {
- if (meminfo.nr_banks != 0)
- squash_mem_tags(tags);
- save_atags(tags);
- parse_tags(tags);
- }
+ if (meminfo.nr_banks != 0)
+ squash_mem_tags(tags);
+ save_atags(tags);
+ parse_tags(tags);
+
+ /* This copies into boot_command_line */
+ parse_cmdline(from);
+}
+
+void __init setup_arch(void)
+{
+ struct machine_desc *mdesc = setup_machine(machine_arch_type);
+
+ machine_name = mdesc->name;
+
+ if (mdesc->soft_reboot)
+ reboot_setup("s");
init_mm.start_code = (unsigned long) &_text;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
- memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
- parse_cmdline(cmdline_p, from);
paging_init(&meminfo, mdesc);
request_standard_resources(&meminfo, mdesc);
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -39,8 +39,6 @@ struct avr32_cpuinfo boot_cpu_data = {
.loops_per_jiffy = 5000000
};
EXPORT_SYMBOL(boot_cpu_data);
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
/*
* Standard memory resources
@@ -536,7 +534,12 @@ static void __init setup_bootmem(void)
}
}
-void __init setup_arch (char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ parse_tags(bootloader_tags);
+}
+
+void __init setup_arch(void)
{
struct clk *cpu_clk;
@@ -553,8 +556,6 @@ void __init setup_arch (char **cmdline_p
kernel_code.end = __pa(init_mm.end_code - 1);
kernel_data.start = __pa(init_mm.end_code);
kernel_data.end = __pa(init_mm.brk - 1);
-
- parse_tags(bootloader_tags);
setup_processor();
setup_platform();
@@ -579,8 +580,6 @@ void __init setup_arch (char **cmdline_p
((cpu_hz + 500) / 1000) % 1000);
}
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
parse_early_param();
setup_bootmem();
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -710,23 +710,23 @@ static inline int __init get_mem_size(vo
BUG();
}
-void __init setup_arch(char **cmdline_p)
+void arch_get_boot_command_line(void)
+{
+#if defined(CONFIG_CMDLINE_BOOL)
+ strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#endif
+
+ /* FIXME: Get rid of command_line and just use boot_command_line? */
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
unsigned long sclk, cclk;
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
-
-#if defined(CONFIG_CMDLINE_BOOL)
- strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
-
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
/* setup memory defaults from the user config */
physical_mem_end = 0;
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
--- a/arch/cris/kernel/setup.c
+++ b/arch/cris/kernel/setup.c
@@ -40,6 +40,20 @@ static struct cpu cpu_devices[NR_CPUS];
extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */
+void __init arch_get_boot_command_line(void)
+{
+#ifdef CONFIG_ETRAX_CMDLINE
+ if (!strcmp(cris_command_line, "")) {
+ strlcpy(cris_command_line, CONFIG_ETRAX_CMDLINE,
+ COMMAND_LINE_SIZE);
+ cris_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+ }
+#endif
+
+ /* FIXME: Do we need cris_command_line at all? */
+ strlcpy(boot_command_line, cris_command_line, COMMAND_LINE_SIZE);
+}
+
/* This mainly sets up the memory area, and can be really confusing.
*
* The physical DRAM is virtually mapped into dram_start to dram_end
@@ -56,7 +70,7 @@ extern void show_etrax_copyright(void);
*
*/
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
extern void init_etrax_debug(void);
unsigned long bootmap_size;
@@ -144,19 +158,6 @@ void __init setup_arch(char **cmdline_p)
paging_init();
- *cmdline_p = cris_command_line;
-
-#ifdef CONFIG_ETRAX_CMDLINE
- if (!strcmp(cris_command_line, "")) {
- strlcpy(cris_command_line, CONFIG_ETRAX_CMDLINE, COMMAND_LINE_SIZE);
- cris_command_line[COMMAND_LINE_SIZE - 1] = '\0';
- }
-#endif
-
- /* Save command line for future references. */
- memcpy(boot_command_line, cris_command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
/* give credit for the CRIS port */
show_etrax_copyright();
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -721,6 +721,7 @@ void __cpuinit calibrate_delay(void)
/*****************************************************************************/
/*
* look through the command line for some things we need to know immediately
+ * FIXME: Use core_param or early_param.
*/
static void __init parse_cmdline_early(char *cmdline)
{
@@ -747,19 +748,22 @@ static void __init parse_cmdline_early(c
} /* end parse_cmdline_early() */
+void __init arch_get_boot_command_line(void)
+{
+ memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
+}
+
/*****************************************************************************/
/*
*
*/
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
#ifdef CONFIG_MMU
printk("Linux FR-V port done by Red Hat Inc <dhowells@...hat.com>\n");
#else
printk("uClinux FR-V port done by Red Hat Inc <dhowells@...hat.com>\n");
#endif
-
- memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
determine_cpu();
determine_clocks(1);
@@ -794,7 +798,6 @@ void __init setup_arch(char **cmdline_p)
/* deal with the command line - RedBoot may have passed one to the kernel */
memcpy(command_line, boot_command_line, sizeof(command_line));
- *cmdline_p = &command_line[0];
parse_cmdline_early(command_line);
/* set up the memory description
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -91,7 +91,18 @@ static const struct console gdb_console
};
#endif
-void __init setup_arch(char **cmdline_p)
+/* FIXME: Can we avoid command_line temporary? */
+void __init arch_get_boot_command_line(void)
+{
+#ifdef CONFIG_DEFAULT_CMDLINE
+ /* set from default command line */
+ if (*command_line == '\0')
+ strcpy(command_line, CONFIG_KERNEL_COMMAND);
+#endif
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
int bootmap_size;
@@ -145,19 +156,9 @@ void __init setup_arch(char **cmdline_p)
(int) memory_end, (int) &_ramend);
#endif
-#ifdef CONFIG_DEFAULT_CMDLINE
- /* set from default command line */
- if (*command_line == '\0')
- strcpy(command_line,CONFIG_KERNEL_COMMAND);
-#endif
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
+ if (strlen(command_line))
+ printk(KERN_DEBUG "Command line: '%s'\n", command_line);
#endif
/*
diff --git a/arch/ia64/dig/setup.c b/arch/ia64/dig/setup.c
--- a/arch/ia64/dig/setup.c
+++ b/arch/ia64/dig/setup.c
@@ -25,7 +25,7 @@
#include <asm/system.h>
void __init
-dig_setup (char **cmdline_p)
+dig_setup(void)
{
unsigned int orig_x, orig_y, num_cols, num_rows, font_height;
diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c
--- a/arch/ia64/hp/sim/hpsim_setup.c
+++ b/arch/ia64/hp/sim/hpsim_setup.c
@@ -38,7 +38,7 @@ ia64_ctl_trace (long on)
}
void __init
-hpsim_setup (char **cmdline_p)
+hpsim_setup(void)
{
ROOT_DEV = Root_SDA1; /* default to first SCSI drive */
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -25,7 +25,7 @@ struct msi_desc;
struct msi_desc;
struct dma_attrs;
-typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_setup_t (void);
typedef void ia64_mv_cpu_init_t (void);
typedef void ia64_mv_irq_init_t (void);
typedef void ia64_mv_send_ipi_t (int, int, int, int);
@@ -111,7 +111,7 @@ machvec_noop_bus (struct pci_bus *bus)
{
}
-extern void machvec_setup (char **);
+extern void machvec_setup(void);
extern void machvec_timer_interrupt (int, void *);
extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h
--- a/arch/ia64/include/asm/paravirt.h
+++ b/arch/ia64/include/asm/paravirt.h
@@ -64,7 +64,7 @@ struct pv_init_ops {
int (*reserve_memory)(struct rsvd_region *region);
void (*arch_setup_early)(void);
- void (*arch_setup_console)(char **cmdline_p);
+ void (*arch_setup_console)(void);
int (*arch_setup_nomca)(void);
void (*post_smp_prepare_boot_cpu)(void);
@@ -91,10 +91,10 @@ static inline void paravirt_arch_setup_e
pv_init_ops.arch_setup_early();
}
-static inline void paravirt_arch_setup_console(char **cmdline_p)
+static inline void paravirt_arch_setup_console(void)
{
if (pv_init_ops.arch_setup_console)
- pv_init_ops.arch_setup_console(cmdline_p);
+ pv_init_ops.arch_setup_console();
}
static inline int paravirt_arch_setup_nomca(void)
@@ -238,7 +238,7 @@ paravirt_do_steal_accounting(unsigned lo
#define paravirt_reserve_memory(region) 0
#define paravirt_arch_setup_early() do { } while (0)
-#define paravirt_arch_setup_console(cmdline_p) do { } while (0)
+#define paravirt_arch_setup_console() do { } while (0)
#define paravirt_arch_setup_nomca() 0
#define paravirt_post_smp_prepare_boot_cpu() do { } while (0)
diff --git a/arch/ia64/kernel/machvec.c b/arch/ia64/kernel/machvec.c
--- a/arch/ia64/kernel/machvec.c
+++ b/arch/ia64/kernel/machvec.c
@@ -60,10 +60,16 @@ machvec_init_from_cmdline(const char *cm
return machvec_init(str);
}
+/* Just make sure 'machvec' param is ignored during general parsing. */
+static int __init ignore_machvec(char *p)
+{
+ return 0;
+}
+early_param("machvec", ignore_machvec);
#endif /* CONFIG_IA64_GENERIC */
void
-machvec_setup (char **arg)
+machvec_setup(void)
{
}
EXPORT_SYMBOL(machvec_setup);
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -447,7 +447,7 @@ io_port_init (void)
* Returns non-zero if a console couldn't be setup.
*/
static inline int __init
-early_console_setup (char *cmdline)
+early_console_setup(char *cmdline)
{
int earlycons = 0;
@@ -529,17 +529,19 @@ int __init reserve_elfcorehdr(unsigned l
#endif /* CONFIG_PROC_VMCORE */
-void __init
-setup_arch (char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ strlcpy(boot_command_line, __va(ia64_boot_param->command_line),
+ COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
unw_init();
paravirt_arch_setup_early();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
-
- *cmdline_p = __va(ia64_boot_param->command_line);
- strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
efi_init();
io_port_init();
@@ -550,12 +552,12 @@ setup_arch (char **cmdline_p)
* that ia64_mv is initialised before any command line
* settings may cause console setup to occur
*/
- machvec_init_from_cmdline(*cmdline_p);
+ machvec_init_from_cmdline(boot_command_line);
#endif
parse_early_param();
- if (early_console_setup(*cmdline_p) == 0)
+ if (early_console_setup(boot_command_line) == 0)
mark_bsp_online();
#ifdef CONFIG_ACPI
@@ -605,7 +607,7 @@ setup_arch (char **cmdline_p)
#endif
paravirt_banner();
- paravirt_arch_setup_console(cmdline_p);
+ paravirt_arch_setup_console();
#ifdef CONFIG_VT
if (!conswitchp) {
@@ -631,7 +633,7 @@ setup_arch (char **cmdline_p)
if (!nomca)
ia64_mca_init();
- platform_setup(cmdline_p);
+ platform_setup();
#ifndef CONFIG_IA64_HP_SIM
check_sal_cache_flush();
#endif
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -100,7 +100,7 @@ EXPORT_SYMBOL(physical_node_map);
int num_cnodes;
-static void sn_init_pdas(char **);
+static void sn_init_pdas(void);
static void build_cnode_tables(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
@@ -361,13 +361,12 @@ static unsigned long sn2_rtc_initial;
/**
* sn_setup - SN platform setup routine
- * @cmdline_p: kernel command line
*
* Handles platform setup for SN machines. This includes determining
* the RTC frequency (via a SAL call), initializing secondary CPUs, and
* setting up per-node data areas. The console is also initialized here.
*/
-void __init sn_setup(char **cmdline_p)
+void __init sn_setup(void)
{
long status, ticks_per_sec, drift;
u32 version = sn_sal_rev();
@@ -425,11 +424,11 @@ void __init sn_setup(char **cmdline_p)
if (vga_console_membase) {
/* usable vga ... make tty0 the preferred default console */
- if (!strstr(*cmdline_p, "console="))
+ if (!strstr(boot_command_line, "console="))
add_preferred_console("tty", 0, NULL);
} else {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
- if (!strstr(*cmdline_p, "console="))
+ if (!strstr(boot_command_line, "console="))
add_preferred_console("ttySG", 0, NULL);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
@@ -470,7 +469,7 @@ void __init sn_setup(char **cmdline_p)
/*
* Create the PDAs and NODEPDAs for all the cpus.
*/
- sn_init_pdas(cmdline_p);
+ sn_init_pdas();
ia64_mark_idle = &snidle;
@@ -502,7 +501,7 @@ void __init sn_setup(char **cmdline_p)
*
* One time setup for Node Data Area. Called by sn_setup().
*/
-static void __init sn_init_pdas(char **cmdline_p)
+static void __init sn_init_pdas(void)
{
cnodeid_t cnode;
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
--- a/arch/ia64/uv/kernel/setup.c
+++ b/arch/ia64/uv/kernel/setup.c
@@ -58,7 +58,7 @@ static __init void get_lowmem_redirect(u
BUG();
}
-void __init uv_setup(char **cmdline_p)
+void __init uv_setup(void)
{
union uvh_si_addr_map_config_u m_n_config;
union uvh_node_id_u node_id;
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
--- a/arch/ia64/xen/xen_pv_ops.c
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -129,7 +129,7 @@ xen_arch_setup_early(void)
}
static void __init
-xen_arch_setup_console(char **cmdline_p)
+xen_arch_setup_console(void)
{
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -83,20 +83,21 @@ unsigned long memory_start;
unsigned long memory_start;
unsigned long memory_end;
-void __init setup_arch(char **);
int get_cpuinfo(char *);
-static __inline__ void parse_mem_cmdline(char ** cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+}
+
+/* FIXME: use core_param/early_param here. */
+static inline void parse_mem_cmdline(void)
{
char c = ' ';
char *to = command_line;
char *from = COMMAND_LINE;
int len = 0;
int usermem = 0;
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
memory_start = (unsigned long)CONFIG_MEMORY_START+PAGE_OFFSET;
memory_end = memory_start+(unsigned long)CONFIG_MEMORY_SIZE;
@@ -124,7 +125,6 @@ static __inline__ void parse_mem_cmdline
*(to++) = c;
}
*to = '\0';
- *cmdline_p = command_line;
if (usermem)
printk(KERN_INFO "user-defined physical RAM map:\n");
}
@@ -220,7 +220,7 @@ extern unsigned long setup_memory(void);
extern unsigned long setup_memory(void);
#endif /* CONFIG_DISCONTIGMEM */
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -74,8 +74,6 @@ EXPORT_SYMBOL(m68k_memory);
EXPORT_SYMBOL(m68k_memory);
struct mem_info m68k_ramdisk;
-
-static char m68k_command_line[CL_SIZE];
void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
/* machine dependent irq functions */
@@ -170,8 +168,7 @@ static void __init m68k_parse_bootinfo(c
break;
case BI_COMMAND_LINE:
- strlcpy(m68k_command_line, (const char *)data,
- sizeof(m68k_command_line));
+ /* Done in arch_get_boot_command_line */
break;
default:
@@ -213,7 +210,22 @@ static void __init m68k_parse_bootinfo(c
#endif
}
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ extern char _end[];
+ /* The bootinfo is located right after the kernel bss */
+ const struct bi_record *record = (const struct bi_record *)&_end;
+
+ while (record->tag != BI_LAST) {
+ if (record->tag == BI_COMMAND_LINE)
+ strlcpy(boot_command_line, (const char *)record->data,
+ COMMAND_LINE_SIZE);
+
+ record = ((void *)record) + record->size;
+ }
+}
+
+void __init setup_arch(void)
{
extern int _etext, _edata, _end;
int i;
@@ -255,9 +267,6 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
-
- *cmdline_p = m68k_command_line;
- memcpy(boot_command_line, *cmdline_p, CL_SIZE);
parse_early_param();
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h
--- a/arch/m68knommu/include/asm/machdep.h
+++ b/arch/m68knommu/include/asm/machdep.h
@@ -19,7 +19,7 @@ extern void (*mach_halt)( void );
extern void (*mach_halt)( void );
extern void (*mach_power_off)( void );
-extern void config_BSP(char *command, int len);
+extern void config_BSP(void);
extern void do_IRQ(int irq, struct pt_regs *fp);
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -40,8 +40,6 @@ unsigned long memory_end;
EXPORT_SYMBOL(memory_start);
EXPORT_SYMBOL(memory_end);
-
-char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
@@ -111,7 +109,20 @@ extern int _stext, _etext, _sdata, _edat
extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
-void __init setup_arch(char **cmdline_p)
+void __weak __init platform_get_boot_command_line(void)
+{
+}
+
+void __init arch_get_boot_command_line(void)
+{
+#if defined(CONFIG_BOOTPARAM)
+ strlcpy(boot_command_line, CONFIG_BOOTPARAM_STRING, COMMAND_LINE_SIZE);
+#endif
+
+ platform_get_boot_command_line();
+}
+
+void __init setup_arch(void)
{
int bootmap_size;
@@ -123,12 +134,7 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) 0;
- config_BSP(&command_line[0], sizeof(command_line));
-
-#if defined(CONFIG_BOOTPARAM)
- strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
- command_line[sizeof(command_line) - 1] = 0;
-#endif
+ config_BSP();
printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
@@ -176,14 +182,9 @@ void __init setup_arch(char **cmdline_p)
(int) memory_start, (int) memory_end);
#endif
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
+ if (strlen(boot_command_line))
+ printk(KERN_DEBUG "Command line: '%s'\n", boot_command_line);
#endif
#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -109,7 +109,7 @@ void mcf_settimericr(unsigned int timer,
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
mach_reset = coldfire_reset;
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -108,15 +108,17 @@ void mcf_settimericr(unsigned int timer,
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+#if defined(CONFIG_NETtel)
+void __init platform_get_boot_command_line(void)
+{
+ /* Copy command line from FLASH to local buffer... */
+ strlcpy(boot_command_line, (char *)0xf0004000, COMMAND_LINE_SIZE);
+}
+#endif /* CONFIG_NETtel */
+
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-
-#if defined(CONFIG_NETtel)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
-#endif /* CONFIG_NETtel */
mach_reset = coldfire_reset;
}
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -114,7 +114,7 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mach_reset = coldfire_reset;
m520x_uarts_init();
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -98,7 +98,7 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_disableall();
mach_reset = coldfire_reset;
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -105,7 +105,7 @@ void mcf_settimericr(unsigned int timer,
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
mach_reset = coldfire_reset;
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -123,7 +123,18 @@ void mcf_settimericr(int timer, int leve
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init platform_get_boot_command_line(void)
+{
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+ /* Copy command line from FLASH to local buffer... */
+ strlcpy(boot_command_line, (char *)0xf0004000, COMMAND_LINE_SIZE);
+#elif defined(CONFIG_CANCam)
+ /* Copy command line from FLASH to local buffer... */
+ strlcpy(boot_command_line, (char *)0xf0010000, COMMAND_LINE_SIZE);
+#endif
+}
+
+void __init config_BSP(void)
{
#if defined (CONFIG_MOD5272)
volatile unsigned char *pivrp;
@@ -134,16 +145,6 @@ void __init config_BSP(char *commandp, i
#endif
mcf_disableall();
-
-#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
-#elif defined(CONFIG_CANCam)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0010000, size);
- commandp[size-1] = 0;
-#endif
mcf_timervector = 69;
mcf_profilevector = 70;
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -112,7 +112,7 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_disableall();
mach_reset = coldfire_reset;
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -369,7 +369,7 @@ void wildfiremod_halt(void)
}
#endif
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_disableall();
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -118,16 +118,21 @@ void mcf_settimericr(unsigned int timer,
}
/***************************************************************************/
+#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+void __init platform_get_boot_command_line(void)
+{
+ /* Copy command line from FLASH to local buffer... */
+ strlcpy(boot_command_line, (char *) 0xf0004000, COMMAND_LINE_SIZE);
+}
+#endif
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
/* Different timer setup - to prevent device clash */
mcf_timervector = 30;
mcf_profilevector = 31;
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -115,21 +115,19 @@ void mcf_settimericr(unsigned int timer,
}
/***************************************************************************/
+#if !defined(CONFIG_BOOTPARAM)
+void __init platform_get_boot_command_line(void)
+{
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(boot_command_line, (char *)0x4000, 4);
+ if (strncmp(boot_command_line, "kcl ", 4) == 0)
+ strlcpy(boot_command_line, (char *)0x4004, COMMAND_LINE_SIZE);
+}
+#endif
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-
-#if !defined(CONFIG_BOOTPARAM)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0x4000, 4);
- if(strncmp(commandp, "kcl ", 4) == 0){
- memcpy(commandp, (char *) 0x4004, size);
- commandp[size-1] = 0;
- } else {
- memset(commandp, 0, size);
- }
-#endif
mcf_timervector = 64+32;
mcf_profilevector = 64+33;
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -110,7 +110,7 @@ void mcf_settimericr(unsigned int timer,
/***************************************************************************/
-void __init config_BSP(char *commandp, int size)
+void __init config_BSP(void)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c
--- a/arch/m68knommu/platform/68328/config.c
+++ b/arch/m68knommu/platform/68328/config.c
@@ -39,7 +39,7 @@ void m68328_reset (void)
/***************************************************************************/
-void config_BSP(char *command, int len)
+void config_BSP(void)
{
printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@...inux.org>\n");
printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@...hds.com>\n");
diff --git a/arch/m68knommu/platform/68328/head-pilot.S b/arch/m68knommu/platform/68328/head-
pilot.S
--- a/arch/m68knommu/platform/68328/head-pilot.S
+++ b/arch/m68knommu/platform/68328/head-pilot.S
@@ -163,7 +163,7 @@ L1:
/* Copy command line from end of bss to command line */
moveal #_ebss, %a0
- moveal #command_line, %a1
+ moveal #boot_command_line, %a1
lea %a1@(512), %a2
DBG_PUTC('G')
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
--- a/arch/m68knommu/platform/68360/config.c
+++ b/arch/m68knommu/platform/68360/config.c
@@ -142,8 +142,7 @@ _bsc1(char *, getbenv, char *, a)
_bsc1(char *, getbenv, char *, a)
#endif
-
-void config_BSP(char *command, int len)
+void config_BSP(void)
{
unsigned char *p;
@@ -172,11 +171,14 @@ void config_BSP(char *command, int len)
printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
p[0], p[1], p[2], p[3], p[4], p[5]);
+#if 0 /* Did this ever work? Was strcpy supposed to be other way? */
p = getbenv("APPEND");
if (p)
strcpy(p,command);
else
command[0] = 0;
+#endif
+
#else
scc1_hwaddr = "\00\01\02\03\04\05";
#endif
diff --git a/arch/m68knommu/platform/68EZ328/config.c
b/arch/m68knommu/platform/68EZ328/config.c
--- a/arch/m68knommu/platform/68EZ328/config.c
+++ b/arch/m68knommu/platform/68EZ328/config.c
@@ -52,7 +52,7 @@ _bsc1(char *, getbenv, char *, a)
_bsc1(char *, getbenv, char *, a)
#endif
-void config_BSP(char *command, int len)
+void config_BSP(void)
{
unsigned char *p;
@@ -64,9 +64,11 @@ void config_BSP(char *command, int len)
printk(KERN_INFO "uCsimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
p[0], p[1], p[2], p[3], p[4], p[5]);
+#if 0 /* Did this ever work? strcpy wrong way? */
p = getbenv("APPEND");
if (p) strcpy(p,command);
else command[0] = 0;
+#endif
#endif
mach_gettod = m68328_timer_gettod;
diff --git a/arch/m68knommu/platform/68VZ328/config.c
b/arch/m68knommu/platform/68VZ328/config.c
--- a/arch/m68knommu/platform/68VZ328/config.c
+++ b/arch/m68knommu/platform/68VZ328/config.c
@@ -59,7 +59,7 @@ static void m68vz328_reset(void)
);
}
-static void init_hardware(char *command, int size)
+static void init_hardware(void)
{
#ifdef CONFIG_DIRECT_IO_ACCESS
SCR = 0x10; /* allow user access to internal registers */
@@ -150,7 +150,7 @@ _bsc1(unsigned char *, gethwaddr, int, a
_bsc1(unsigned char *, gethwaddr, int, a)
_bsc1(char *, getbenv, char *, a)
-static void init_hardware(char *command, int size)
+static void init_hardware(void)
{
char *p;
@@ -158,11 +158,13 @@ static void init_hardware(char *command,
p = cs8900a_hwaddr = gethwaddr(0);
printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
p[0], p[1], p[2], p[3], p[4], p[5]);
+#if 0 /* Did this ever work? strcpy wrong way? */
p = getbenv("APPEND");
if (p)
strcpy(p, command);
else
command[0] = 0;
+#endif
}
/***************************************************************************/
@@ -172,7 +174,7 @@ static void m68vz328_reset(void)
{
}
-static void init_hardware(char *command, int size)
+static void init_hardware(void)
{
}
@@ -180,11 +182,11 @@ static void init_hardware(char *command,
#endif
/***************************************************************************/
-void config_BSP(char *command, int size)
+void config_BSP(void)
{
printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
- init_hardware(command, size);
+ init_hardware();
mach_gettod = m68328_timer_gettod;
mach_reset = m68vz328_reset;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -465,7 +465,14 @@ static int __init early_parse_mem(char *
}
early_param("mem", early_parse_mem);
-static void __init arch_mem_init(char **cmdline_p)
+void arch_get_boot_command_line(void)
+{
+ /* FIXME: Just replace command_line with boot_command_line? */
+ strlcpy(command_line, arcs_cmdline, sizeof(command_line));
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+static void __init arch_mem_init(void)
{
extern void plat_mem_setup(void);
@@ -474,11 +481,6 @@ static void __init arch_mem_init(char **
pr_info("Determined physical RAM map:\n");
print_memory_map();
-
- strlcpy(command_line, arcs_cmdline, sizeof(command_line));
- strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-
- *cmdline_p = command_line;
parse_early_param();
@@ -545,7 +547,7 @@ static void __init resource_init(void)
}
}
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch()
{
cpu_probe();
prom_init();
@@ -564,7 +566,7 @@ void __init setup_arch(char **cmdline_p)
#endif
#endif
- arch_mem_init(cmdline_p);
+ arch_mem_init();
resource_init();
plat_smp_setup();
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -73,15 +73,17 @@ static const char *const mn10300_cputype
"unknown"
};
+void __init arch_get_boot_command_line(void)
+{
+ strcpy(boot_command_line, redboot_command_line);
+}
+
/*
- *
+ * FIXME: use core_param
*/
-static void __init parse_mem_cmdline(char **cmdline_p)
+static void __init parse_mem_cmdline(void)
{
char *from, *to, c;
-
- /* save unparsed command line copy for /proc/cmdline */
- strcpy(boot_command_line, redboot_command_line);
/* see if there's an explicit memory size option */
from = redboot_command_line;
@@ -103,7 +105,6 @@ static void __init parse_mem_cmdline(cha
}
*to = '\0';
- *cmdline_p = redboot_command_line;
if (memory_size == 0)
panic("Memory size not known\n");
@@ -117,14 +118,14 @@ static void __init parse_mem_cmdline(cha
/*
* architecture specific setup
*/
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
unsigned long bootmap_size;
unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn;
cpu_init();
unit_setup();
- parse_mem_cmdline(cmdline_p);
+ parse_mem_cmdline();
init_mm.start_code = (unsigned long)&_text;
init_mm.end_code = (unsigned long) &_etext;
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -63,30 +63,17 @@ unsigned long parisc_vmerge_boundary = 0
unsigned long parisc_vmerge_boundary = 0;
unsigned long parisc_vmerge_max_size = 0;
-void __init setup_cmdline(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
{
extern unsigned int boot_args[];
/* Collect stuff passed in from the boot loader */
/* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */
- if (boot_args[0] < 64) {
- /* called from hpux boot loader */
- boot_command_line[0] = '\0';
- } else {
+ if (boot_args[0] >= 64) {
+ /* not called from hpux boot loader */
strcpy(boot_command_line, (char *)__va(boot_args[1]));
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_args[2] != 0) /* did palo pass us a ramdisk? */
- {
- initrd_start = (unsigned long)__va(boot_args[2]);
- initrd_end = (unsigned long)__va(boot_args[3]);
- }
-#endif
}
-
- strcpy(command_line, boot_command_line);
- *cmdline_p = command_line;
}
#ifdef CONFIG_PA11
@@ -121,6 +108,7 @@ extern void collect_boot_cpu_data(void);
void __init setup_arch(char **cmdline_p)
{
+ extern unsigned int boot_args[];
#ifdef CONFIG_64BIT
extern int parisc_narrow_firmware;
#endif
@@ -142,7 +130,15 @@ void __init setup_arch(char **cmdline_p)
}
#endif
setup_pdc();
- setup_cmdline(cmdline_p);
+ strcpy(command_line, boot_command_line);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* did palo pass us a ramdisk? */
+ if (boot_args[0] >= 64 && boot_args[2] != 0) {
+ initrd_start = (unsigned long)__va(boot_args[2]);
+ initrd_end = (unsigned long)__va(boot_args[3]);
+ }
+#endif
collect_boot_cpu_data();
do_memory_inventory(); /* probe for physical memory */
parisc_cache_init();
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -264,11 +264,15 @@ static void __init exc_lvl_early_init(vo
#define exc_lvl_early_init()
#endif
+void arch_get_boot_command_line(void)
+{
+ /* FIXME: Get rid of cmd_line in favor of boot_command_line? */
+ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+}
+
/* Warning, IO base is not yet inited */
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
- *cmdline_p = cmd_line;
-
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -502,6 +502,12 @@ static void __init emergency_stack_init(
}
}
+void arch_get_boot_command_line(void)
+{
+ /* FIXME: Get rid of cmd_line in favor of boot_command_line? */
+ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+}
+
/*
* Called into from start_kernel, after lock_kernel has been called.
* Initializes bootmem, which is unsed to manage page allocation until
@@ -510,8 +516,6 @@ void __init setup_arch(char **cmdline_p)
void __init setup_arch(char **cmdline_p)
{
ppc64_boot_msg(0x12, "Setup Arch");
-
- *cmdline_p = cmd_line;
/*
* Set cache line size based on type of cpu as a default.
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -750,7 +750,7 @@ static void __init setup_hwcaps(void)
*/
void __init
-setup_arch(char **cmdline_p)
+setup_arch(void)
{
/*
* print what head.S has found out about the machine
@@ -772,10 +772,6 @@ setup_arch(char **cmdline_p)
} else
printk("We are running native (64 bit mode)\n");
#endif /* CONFIG_64BIT */
-
- /* Have one command line that is parsed and saved in /proc/cmdline */
- /* boot_command_line has been already set up in early.c */
- *cmdline_p = boot_command_line;
ROOT_DEV = Root_RAM0;
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -202,7 +202,7 @@ static void __init setup_port_multiplexi
ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
-static void __init mpr2_setup(char **cmdline_p)
+static void __init mpr2_setup(void)
{
__set_io_port_base(0xa0000000);
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -278,7 +278,7 @@ static void sh7785lcr_power_off(void)
}
/* Initialize the board */
-static void __init sh7785lcr_setup(char **cmdline_p)
+static void __init sh7785lcr_setup(void)
{
void __iomem *sm501_reg;
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -33,7 +33,7 @@ extern int gapspci_init(void);
extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
-static void __init dreamcast_setup(char **cmdline_p)
+static void __init dreamcast_setup(void)
{
int i;
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -279,7 +279,7 @@ static void r7780rp_power_off(void)
/*
* Initialize the board
*/
-static void __init highlander_setup(char **cmdline_p)
+static void __init highlander_setup(void)
{
u16 ver = ctrl_inw(PA_VERREG);
int i;
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -67,7 +67,7 @@ static int __init hp6xx_devices_setup(vo
return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
}
-static void __init hp6xx_setup(char **cmdline_p)
+static void __init hp6xx_setup(void)
{
u8 v8;
u16 v;
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -85,7 +85,7 @@ static int __init landisk_devices_setup(
__initcall(landisk_devices_setup);
-static void __init landisk_setup(char **cmdline_p)
+static void __init landisk_setup(void)
{
/* LED ON */
ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -355,7 +355,7 @@ static int __init smsc_superio_setup(voi
return 0;
}
-static void __init microdev_setup(char **cmdline_p)
+static void __init microdev_setup(void)
{
int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
const int fpgaRevision = *fpgaRevisionRegister;
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -590,7 +590,7 @@ static int __init migor_devices_setup(vo
}
__initcall(migor_devices_setup);
-static void __init migor_setup(char **cmdline_p)
+static void __init migor_setup(void)
{
}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -218,7 +218,7 @@ static void rts7751r2d_power_off(void)
/*
* Initialize the board
*/
-static void __init rts7751r2d_setup(char **cmdline_p)
+static void __init rts7751r2d_setup(void)
{
void __iomem *sm501_reg;
u16 ver = ctrl_inw(PA_VERREG);
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -81,7 +81,7 @@ static int __init sdk7780_devices_setup(
}
device_initcall(sdk7780_devices_setup);
-static void __init sdk7780_setup(char **cmdline_p)
+static void __init sdk7780_setup(void)
{
u16 ver = ctrl_inw(FPGA_FPVERR);
u16 dateStamp = ctrl_inw(FPGA_FPDATER);
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -110,7 +110,7 @@ device_initcall(sh7343se_devices_setup);
/*
* Initialize the board
*/
-static void __init sh7343se_setup(char **cmdline_p)
+static void __init sh7343se_setup(void)
{
ctrl_outw(0xf900, FPGA_OUT); /* FPGA */
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -24,7 +24,7 @@ static void __init smsc_config(int index
}
/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
+static void __init smsc_setup(void)
{
outb_p(CONFIG_ENTER, CONFIG_PORT);
outb_p(CONFIG_ENTER, CONFIG_PORT);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -79,7 +79,7 @@ static int __init se7721_devices_setup(v
}
device_initcall(se7721_devices_setup);
-static void __init se7721_setup(char **cmdline_p)
+static void __init se7721_setup(void)
{
/* for USB */
ctrl_outw(0x0000, 0xA405010C); /* PGCR */
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -153,7 +153,7 @@ static int __init se7722_devices_setup(v
}
device_initcall(se7722_devices_setup);
-static void __init se7722_setup(char **cmdline_p)
+static void __init se7722_setup(void)
{
ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -81,7 +81,7 @@ device_initcall(se7780_devices_setup);
#define GPIO_PMSELR 0xFFEA0080
#define GPIO_PECR 0xFFEA0008
-static void __init se7780_setup(char **cmdline_p)
+static void __init se7780_setup(void)
{
/* "SH-Linux" on LED Display */
ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -36,7 +36,7 @@ static void __iomem *sh03_ioport_map(uns
/* arch/sh/boards/sh03/rtc.c */
void sh03_time_init(void);
-static void __init sh03_setup(char **cmdline_p)
+static void __init sh03_setup(void)
{
board_time_init = sh03_time_init;
}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -151,7 +151,7 @@ static int __init sh7763rdp_devices_setu
}
device_initcall(sh7763rdp_devices_setup);
-static void __init sh7763rdp_setup(char **cmdline_p)
+static void __init sh7763rdp_setup(void)
{
/* Board version check */
if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -17,7 +17,7 @@ struct device;
struct device;
struct sh_machine_vector {
- void (*mv_setup)(char **cmdline_p);
+ void (*mv_setup)(void);
const char *mv_name;
int mv_nr_irqs;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -329,7 +329,19 @@ early_param("elfcorehdr", parse_elfcoreh
early_param("elfcorehdr", parse_elfcorehdr);
#endif
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+#ifdef CONFIG_CMDLINE_BOOL
+ strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#else
+ strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#endif
+
+ /* FIXME: get rid of command_line, just use boot_command_line? */
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
enable_mmu();
@@ -370,16 +382,6 @@ void __init setup_arch(char **cmdline_p)
if (!memory_end)
memory_end = memory_start + __MEMORY_SIZE;
-#ifdef CONFIG_CMDLINE_BOOL
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#endif
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
parse_early_param();
sh_mv_setup();
@@ -407,7 +409,7 @@ void __init setup_arch(char **cmdline_p)
/* Perform the machine specific initialisation */
if (likely(sh_mv.mv_setup))
- sh_mv.mv_setup(cmdline_p);
+ sh_mv.mv_setup();
paging_init();
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -203,16 +203,19 @@ struct tt_entry *sparc_ttable;
struct pt_regs fake_swapper_regs;
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ strcpy(boot_command_line, prom_getbootargs());
+}
+
+void __init setup_arch(void)
{
int i;
unsigned long highest_paddr;
sparc_ttable = (struct tt_entry *) &start;
- /* Initialize PROM console and command line. */
- *cmdline_p = prom_getbootargs();
- strcpy(boot_command_line, *cmdline_p);
+ /* Initialize PROM console. */
parse_early_param();
/* Set sparc_cpu_model */
@@ -262,7 +265,7 @@ void __init setup_arch(char **cmdline_p)
#elif defined(CONFIG_PROM_CONSOLE)
conswitchp = &prom_con;
#endif
- boot_flags_init(*cmdline_p);
+ boot_flags_init(boot_command_line);
idprom_init();
if (ARCH_SUN4C)
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -276,14 +276,17 @@ void __init boot_cpu_id_too_large(int cp
}
#endif
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
{
- /* Initialize PROM console and command line. */
- *cmdline_p = prom_getbootargs();
- strcpy(boot_command_line, *cmdline_p);
+ strcpy(boot_command_line, prom_getbootargs());
+}
+
+void __init setup_arch(void)
+{
+ /* Initialize PROM console. */
parse_early_param();
- boot_flags_init(*cmdline_p);
+ boot_flags_init(boot_command_line);
register_console(&prom_early_console);
if (tlb_type == hypervisor)
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -371,11 +371,15 @@ int __init linux_main(int argc, char **a
return start_uml();
}
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+ /* FIXME: do we need command_line at all? */
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
paging_init();
- strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
setup_hostinfo(host_info, sizeof host_info);
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -782,6 +782,25 @@ static struct dmi_system_id __initdata b
{}
};
+void __init arch_get_boot_command_line(void)
+{
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
+ /* FIXME: Get rid of command_line? */
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+}
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
@@ -794,8 +813,7 @@ static struct dmi_system_id __initdata b
*
* Note: On x86_64, fixmaps are ready for use even before this is called.
*/
-
-void __init setup_arch(char **cmdline_p)
+void __init setup_arch(void)
{
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
@@ -868,22 +886,6 @@ void __init setup_arch(char **cmdline_p)
data_resource.end = virt_to_phys(_edata)-1;
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
parse_early_param();
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -198,10 +198,6 @@ void __init init_arch(bp_tag_t *bp_start
sysmem.nr_banks = 0;
-#ifdef CONFIG_CMDLINE_BOOL
- strcpy(command_line, default_command_line);
-#endif
-
/* Parse boot parameters */
if (bp_start)
@@ -240,14 +236,19 @@ extern char _DoubleExceptionVector_liter
extern char _DoubleExceptionVector_literal_start;
extern char _DoubleExceptionVector_text_end;
-void __init setup_arch(char **cmdline_p)
+void __init arch_get_boot_command_line(void)
+{
+#ifdef CONFIG_CMDLINE_BOOL
+ strcpy(command_line, default_command_line);
+#endif
+ /* FIXME: Can we skip command_line? */
+ strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+}
+
+void __init setup_arch(void)
{
extern int mem_reserve(unsigned long, unsigned long, int);
extern void bootmem_init(void);
-
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
- *cmdline_p = command_line;
/* Reserve some memory regions */
diff --git a/include/linux/init.h b/include/linux/init.h
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -149,7 +149,8 @@ extern unsigned int reset_devices;
extern unsigned int reset_devices;
/* used by init/main.c */
-void setup_arch(char **);
+void setup_arch(void);
+void arch_get_cmdline(char *cmdline);
void prepare_namespace(void);
extern void (*late_time_init)(void);
diff --git a/init/main.c b/init/main.c
--- a/init/main.c
+++ b/init/main.c
@@ -458,12 +458,12 @@ static void __init smp_init(void)
* parsing is performed in place, and we should allow a component to
* store reference of name/value for future reference.
*/
-static void __init setup_command_line(char *command_line)
+static void __init setup_command_line(void)
{
saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
- static_command_line = alloc_bootmem(strlen (command_line)+1);
+ static_command_line = alloc_bootmem(strlen (boot_command_line)+1);
strcpy (saved_command_line, boot_command_line);
- strcpy (static_command_line, command_line);
+ strcpy (static_command_line, boot_command_line);
}
/*
@@ -554,9 +554,15 @@ void __init __weak thread_info_cache_ini
{
}
+/* If the arch already sets boot_command_line, we need do nothing. */
+void __init __weak arch_get_boot_command_line(void)
+{
+}
+
+/* Ideally, this would take a 'const char *cmdline' param. */
asmlinkage void __init start_kernel(void)
{
- char * command_line;
+ arch_get_boot_command_line();
smp_setup_processor_id();
@@ -583,10 +589,10 @@ asmlinkage void __init start_kernel(void
page_address_init();
printk(KERN_NOTICE);
printk(linux_banner);
- setup_arch(&command_line);
+ setup_arch();
mm_init_owner(&init_mm, &init_task);
- setup_command_line(command_line);
- parse_args("Core params", command_line, __start___core_param,
+ setup_command_line();
+ parse_args("Core params", boot_command_line, __start___core_param,
__stop___core_param - __start___core_param,
unknown_core_ok, true);
diff --git a/kernel/kexec.c b/kernel/kexec.c
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1273,6 +1273,7 @@ static int __init parse_crashkernel_simp
/*
* That function is the entry point for command line parsing and should be
* called from the arch-specific code.
+ * FIXME: Use core_param?
*/
int __init parse_crashkernel(char *cmdline,
unsigned long long system_ram,
.
Powered by blists - more mailing lists