linux-kernel - Re: 2.6.27 - swncq problem with nforce 570 and ST3320620AS?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <200812072220.06096.rjw@sisk.pl>
Date:	Sun, 7 Dec 2008 22:20:05 +0100
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Jan De Luyck <ml_linuxkernel_20080830@...re.org>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: 2.6.27 - swncq problem with nforce 570 and ST3320620AS?

On Tuesday, 2 of December 2008, Jan De Luyck wrote:
> Hello,
> 
> I switched not too long ago to 2.6.27-series, and since then I've been getting this now and then at bootup:
> 
> This was with 2.6.27.4, upgraded today to 2.6.27.7.

Does it happen with the current mainline too?

Rafael


> Disk in question is:
> 
> ATA device, with non-removable media
>         Model Number:       ST3320620AS                           
>         Serial Number:      9QF1QMGA
>         Firmware Revision:  3.AAE   
> 
> whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0x6 sactive 0x6
> whocares kernel: ata4: SWNCQ:qc_active 0x6 defer_bits 0x0 last_issue_tag 0x2
> whocares kernel:   dhfis 0x6 dmafis 0x2 sdbfis 0x0
> whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
> whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
> whocares kernel: ata4: tag 0x1: 1 1 0 1
> whocares kernel: ata4: tag 0x2: 1 0 0 1
> whocares kernel: ata4.00: exception Emask 0x0 SAct 0x6 SErr 0x1800000 action 0x6 frozen
> whocares kernel: ata4: SError: { LinkSeq TrStaTrns }
> whocares kernel: ata4.00: cmd 60/3e:08:61:00:00/00:00:00:00:00/40 tag 1 ncq 31744 in
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 60/02:10:bf:d6:42/00:00:25:00:00/40 tag 2 ncq 1024 in
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4: hard resetting link
> whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> whocares kernel: ata4.00: configured for UDMA/133
> whocares kernel: ata4: EH complete
> whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
> whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
> whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ...
> whocares kernel: XFS mounting filesystem sdd1
> whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF
> whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0
> whocares kernel:   dhfis 0x1 dmafis 0x1 sdbfis 0x0
> whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
> whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
> whocares kernel: ata4: tag 0x0: 1 1 0 1
> whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen
> whocares kernel: ata4: SError: { Handshk }
> whocares kernel: ata4.00: cmd 61/00:00:9f:8d:a2/04:00:12:00:00/40 tag 0 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:08:9f:91:a2/04:00:12:00:00/40 tag 1 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:10:9f:95:a2/04:00:12:00:00/40 tag 2 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:18:9f:99:a2/04:00:12:00:00/40 tag 3 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4: hard resetting link
> whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> whocares kernel: ata4.00: configured for UDMA/133
> whocares kernel: ata4: EH complete
> whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
> whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
> whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF
> whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0
> whocares kernel:   dhfis 0x1 dmafis 0x1 sdbfis 0x0
> whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
> whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
> whocares kernel: ata4: tag 0x0: 1 1 0 1
> whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen
> whocares kernel: ata4: SError: { Handshk }
> whocares kernel: ata4.00: cmd 61/00:00:9f:99:a2/04:00:12:00:00/40 tag 0 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:08:9f:95:a2/04:00:12:00:00/40 tag 1 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:10:9f:91:a2/04:00:12:00:00/40 tag 2 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4.00: cmd 61/00:18:9f:8d:a2/04:00:12:00:00/40 tag 3 ncq 524288 out
> whocares kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> whocares kernel: ata4.00: status: { DRDY }
> whocares kernel: ata4: hard resetting link
> whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> whocares kernel: ata4.00: configured for UDMA/133
> whocares kernel: ata4: EH complete
> whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
> whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
> whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> whocares kernel: Ending clean XFS mount for filesystem: sdd1
> ...
> 
> Anyone any idea what might be causing this?
> 
> I have several disks of the same type in my PC, with different firmwares though - this is the only 
> one exhibiting this problem.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/