[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200812081604.09996.trenn@suse.de>
Date: Mon, 8 Dec 2008 16:04:09 +0100
From: Thomas Renninger <trenn@...e.de>
To: Shaohua Li <shaohua.li@...el.com>
Cc: Matthew Garrett <mjg59@...f.ucam.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"jbarnes@...tuousgeek.org" <jbarnes@...tuousgeek.org>,
Rafael Wysocki <rwysocki@...e.de>,
"shemminger@...ux-foundation.org" <shemminger@...ux-foundation.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"Stable@...nel.org" <Stable@...nel.org>
Subject: Re: [PATCH] PCIe ASPM causes machine (HP Compaq 6735s) to sometimes freeze hard at boot at PCI initialization time
On Monday 08 December 2008 02:32:42 Shaohua Li wrote:
> On Sat, 2008-12-06 at 02:21 +0800, Matthew Garrett wrote:
> > On Fri, Dec 05, 2008 at 02:07:13PM +0100, Thomas Renninger wrote:
> > > PCIE: Break out of endless loop waiting for PCI config bits to switch
> > >
> > > Makes a Compaq 6735s boot reliably again which hang in the loop
> > > on some boots.
> >
> > Which device does it get stuck on?
> >
> > > + if (loop_count == 100)
> > > + dev_printk (KERN_WARNING, &pdev->dev, "Could not configure ASPM\n");
> >
> > "ASPM: Could not configure common clock\n"? ASPM should still work,
> > though with higher latency. It probably also needs to revert the
> > configuration changes.
>
> Yep, Just undo the pci config writes of pcie_aspm_configure_common_clock
> should be fine to me. Maybe an expiration time is ok here.
> Does the device work after this?
After not writing back the pci values as done with this patch?
Yes, I think it did, it's the network card behind the bridge.
It definitely does with this patch.
Thanks,
Thomas
What about this one. (I assume there cannot be more than 256
functions in a slot. There might be a better value):
PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch
Makes a Compaq 6735s boot reliably again which hang in the loop
on some boots.
Also correctly recover PCI bits if link trainig timed out.
Signed-off-by: Thomas Renninger <trenn@...e.de>
---
drivers/pci/pcie/aspm.c | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
Index: linux-2.6.27/drivers/pci/pcie/aspm.c
===================================================================
--- linux-2.6.27.orig/drivers/pci/pcie/aspm.c
+++ linux-2.6.27/drivers/pci/pcie/aspm.c
@@ -16,6 +16,7 @@
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/pci-aspm.h>
#include "../pci.h"
@@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct p
*/
static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
{
- int pos, child_pos;
+ int pos, child_pos, i = 0;
u16 reg16 = 0;
struct pci_dev *child_dev;
int same_clock = 1;
-
+ unsigned long start_jiffies = jiffies;
+ u16 child_regs[256], parent_reg;
/*
* all functions of a slot should have the same Slot Clock
* Configuration, so just check one function
@@ -191,16 +193,18 @@ static void pcie_aspm_configure_common_c
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
®16);
+ child_regs[i] = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
reg16);
+ i++;
}
/* Configure upstream component */
- pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ parent_reg = pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
@@ -212,12 +216,29 @@ static void pcie_aspm_configure_common_c
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
/* Wait for link training end */
- while (1) {
+ /* break out after waiting for 1 second */
+ while ((jiffies - start_jiffies) < HZ) {
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_LT))
break;
cpu_relax();
}
+ /* training failed -> recover */
+ if ((jiffies - start_jiffies) >= HZ) {
+ dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
+ " common clock\n");
+ i = 0;
+ list_for_each_entry(child_dev, &pdev->subordinate->devices,
+ bus_list) {
+ child_pos = pci_find_capability(child_dev,
+ PCI_CAP_ID_EXP);
+ pci_write_config_word(child_dev,
+ child_pos + PCI_EXP_LNKCTL,
+ child_regs[i]);
+ i++;
+ }
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+ }
}
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists