Message-ID: <386072610812110612u6eed650bpe302b663a692b3bf@mail.gmail.com>
Date:	Thu, 11 Dec 2008 22:12:56 +0800
From:	"Bryan Wu" <cooloney@...nel.org>
To:	"Takashi Iwai" <tiwai@...e.de>
Cc:	"ALSA devel" <alsa-devel@...a-project.org>,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: [Question] Can I open a substream in kernel space without attach to a file pointer?

On Thu, Dec 11, 2008 at 9:24 PM, Takashi Iwai <tiwai@...e.de> wrote:
> At Thu, 11 Dec 2008 21:19:21 +0800,
> Bryan Wu wrote:
>>
>> On Thu, Dec 11, 2008 at 8:03 PM, Takashi Iwai <tiwai@...e.de> wrote:
>> > At Thu, 11 Dec 2008 18:40:38 +0800,
>> > Bryan Wu wrote:
>> >>
>> >> Hi Takashi,
>> >>
>> >> I just made some progress about this USB audio gadget driver. But I
>> >> still got some questions about the audio playback.
>> >> Please kindly help me to work out here, as you're the best one to ask, -:)
>> >>
>> >> I can receive ISO transfer packets from PC host. The packet includes
>> >> 192 bytes audio data.
>> >> So I tried to use vfs_write() function to write this 192 bytes to the
>> >> opened snd card.
>> >> There is no sound.
>> >>
>> >> Then I create a buffer which is 6K bytes size and a workqueue. I will
>> >> fill the 6K buffer with the ISO packets data.
>> >> When the 6K buffer is full, in the workqueue handler I will call
>> >> vfs_write() function to write these 6K bytes data to the sound card.
>> >> This time, sound played and it works although it is not very smooth.
>> >>
>> >> So I guess the audio buffer I great is very important to playback audio.
>> >> How to choose the buffer size? If the size < 6K, there is no sound.
>> >> I guess it depends on the sound card hardware, but I failed to find
>> >> any info from hw_params and sw_params.
>> >
>> > Well, this pretty much depends on the "sound card" you are accessing.
>> > You mentioned about AD1980 but the question is rather what
>> > controller is used.  The codec chip is basically independent from the
>> > DMA transfer parameter.
>> >
>>
>> Right, currently I'm trying AD1980 which using DMA transfer by
>> Blackfin BF54x processor.
>
> Is it an ASoC one?
>

Yes, it's.

>> >> Actually, I want to remove the audio buffer here, just write the 192
>> >> audio data to sound card directly. Is that possible?
>> >
>> > Also depends on the hardware.  If the audio chip requires the DMA
>> > transfer, you'd need anyway a buffer.
>> >
>>
>> So how to determine the buffer size based on the DMA hardware configuration?
>
> This should be done via usual hw_refine / hw_params ioctls.
>

in struct snd_pcm_hw_params, I guess only fifo_size is useful for me
to choose my buffer size, right?
If the fifo_size == 1K, so how big is OK for my buffer size?

The buffer size is so tricky here, I try to make my driver is
independent with the lower card hardware.
So I need to find a algorithm to choose the buffer size here.

>> I tried to change the period_size and buffer_size of the runtime struct.
>> It also didn't work.
>
> Well, the constraint is rather the "slave" sound card.  You are
> actually creating a tunnel driver.  The period size and buffer size
> are issues of the controller, thus you cannot change the parameters of
> the tunnel driver freely.
>

Exactly. And another question is whether is it possible using
nonblocking writing in my driver?

Thanks a lot for your patient answer.
-Bryan

>
> Takashi
>
>>
>> Thanks a lot
>> -Bryan
>>
>> >
>> > Takashi
>> >
>> >>
>> >> Thanks a lot.
>> >> -Bryan
>> >>
>> >>
>> >> On Thu, Nov 20, 2008 at 12:01 AM, Takashi Iwai <tiwai@...e.de> wrote:
>> >> > At Wed, 19 Nov 2008 23:42:48 +0800,
>> >> > Bryan Wu wrote:
>> >> >>
>> >> >> On Wed, Nov 19, 2008 at 9:49 PM, Takashi Iwai <tiwai@...e.de> wrote:
>> >> >> > At Wed, 19 Nov 2008 18:00:36 +0800,
>> >> >> > Bryan Wu wrote:
>> >> >> >>
>> >> >> >> Hi Takashi,
>> >> >> >>
>> >> >> >> I am developing a USB gadget driver compliant to USB Audio Class Spec 2.0.
>> >> >> >> So I want to open a PCM substream and do some playback of capture,
>> >> >> >> then close them?
>> >> >> >>
>> >> >> >> I found snd_pcm_open_substream() is for opening a substream and attach
>> >> >> >> it to a file.
>> >> >> >> But in my application, there is no need to open a file before opening
>> >> >> >> a substream.
>> >> >> >>
>> >> >> >> - Is there any interface for me to open a substream in kernel space
>> >> >> >> without attach to a file?
>> >> >> >> - How to playback and capture in kernel space, use snd_pcm_lib_write
>> >> >> >> and snd_pcm_lib_read?
>> >> >> >> - How to get the snd_pcm_hardware struct from low level driver,
>> >> >> >> because I have to get the hardware configuration of the snd pcm
>> >> >> >> device?
>> >> >> >>
>> >> >> >> And I am reading the code of OSS emulator in ALSA. It provides some
>> >> >> >> info about the kernel space sound card programming.
>> >> >> >
>> >> >> > Yes, OSS emulation code handles the PCM in the kernel.
>> >> >> > But, basically I don't recommend you to do this -- it's not the job of
>> >> >> > the sound card driver.  The whole PCM stuff is handled by the PCM
>> >> >> > middle layer, not the driver itself.
>> >> >>
>> >> >> No, my plan is not a sound card driver. It is an USB gadget audio driver.
>> >> >> When an embedded system for example Blackfin board connects to a USB host (PC),
>> >> >> PC will recognize this USB device as a USB Audio Class device.
>> >> >>
>> >> >> Generally, there should be a sound card on the embedded system. Our
>> >> >> Blackfin board
>> >> >> has an AD1980 ALSA sound card. The USB gadget audio driver will open this sound
>> >> >> card and export this device to USB host PC by some USB audio class specific
>> >> >> descriptors. Then the PC can playback some audio stream by USB cable, USB gadget
>> >> >> audio driver will receive this stream and playback the data by AD1980
>> >> >> ALSA playback
>> >> >> substream. Capture is the similar.
>> >> >>
>> >> >> > Any reason why you handle the PCM stuff completely in your driver
>> >> >> > code?
>> >> >> >
>> >> >>
>> >> >> There is USB gadget MIDI driver in kernel. But it asked the user to
>> >> >> use aconnect tool to
>> >> >> connect the virtual MIDI card to a real one. I don't want travel to
>> >> >> user space and it should
>> >> >> be more efficient in kernel space to handle all things including PCM
>> >> >> open/release/read/write
>> >> >> and Mixer control.
>> >> >>
>> >> >> Any hints about this? I really need some help from ALSA guru, cause
>> >> >> I'm not familiar the internal
>> >> >> things here.
>> >> >
>> >> > Well, the access in the kernel space is fairly similar as in the user
>> >> > space.  It opens, issues ioctls, reads and writes.  The difference is
>> >> > that you access via dedicated function calls instead of syscalls.
>> >> > There is no way to poke the driver internal from other drivers.
>> >> > To answer your questions...
>> >> >
>> >> >> >> - Is there any interface for me to open a substream in kernel space
>> >> >> >> without attach to a file?
>> >> >
>> >> > No.
>> >> >
>> >> >> >> - How to playback and capture in kernel space, use snd_pcm_lib_write
>> >> >> >> and snd_pcm_lib_read?
>> >> >
>> >> > Yes.  But for the kernel space buffer, you'd need to fake the
>> >> > user-space pointer by snd_enter_user() and snd_leave_user().  See
>> >> > snd_pcm_oss_write3().
>> >> >
>> >> >> >> - How to get the snd_pcm_hardware struct from low level driver,
>> >> >> >> because I have to get the hardware configuration of the snd pcm
>> >> >> >> device?
>> >> >
>> >> > Not way to peek/poke the driver internals from the outside.
>> >> > You'll need to negotiate via snd_pcm_kernel_ioctl() like user-space
>> >> > programs.
>> >> >
>> >> >
>> >> > HTH,
>> >> >
>> >> > Takashi
>> >> >
>> >>
>> >
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists